Snapshot delete has some complicated looking code that is weirdly subtle
at times. I've cleaned it up the best I can without re-writing it, but
there are still a lot of details that are non-obvious. Add a bunch of
comments to the main parts of the code to help future developers better
understand the mechanics of snapshot deletion.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is
incorrect, we have proper error handling here, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In walk_up_proc() we have several sanity checks that should only trip if
the programmer made a mistake. Convert these to ASSERT()'s instead of
BUG_ON()'s.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In reada we BUG_ON(refs == 0), which could be unkind since we aren't
holding a lock on the extent leaf and thus could get a transient
incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which
could happen if we have extent tree corruption. Change that to return
-EUCLEAN. In do_walk_down() we catch this case and handle it correctly,
however we return -EIO, which -EUCLEAN is a more appropriate error code.
Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert
that to proper error handling. Also adjust the error message so we can
actually do something with the information.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a couple of areas where we check to make sure the tree block is
locked before looking up or messing with references. This is old code
so it has this as BUG_ON(). Convert this to ASSERT() for developers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have blanket BUG_ON(ret) after every one of these reference mod
attempts, which is just incorrect. If we encounter any errors during
walk_down_tree() we will abort, so abort on any one of these failures.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We handle errors here properly, ENOMEM isn't fatal, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a big chunk of code in do_walk_down() that will conditionally
remove the reference for the child block we're currently evaluating.
Extract it out into it's own helper and call that from do_walk_down()
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently duplicate the logic for walking into a node during snapshot
delete. In one case it is during the actual delete, and in the other we
use it for deciding if we should reada the block or not.
Factor this code into it's own helper and comment fully what we're
doing, and then update the two users to use the new helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only set this if wc->refs[level - 1] > 1, and we check this way up
above where we need it because the first thing we do before dropping our
refs is reset wc->refs[level - 1] to 0. Reorder resetting of wc->refs
to after our drop logic, and then remove the need_account variable and
simply check wc->refs[level - 1] directly instead of using a variable.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
do_walk_down() already has a bunch of things going on, and there's a bit
of code related to reading in the next eb if we decide we need it. Move
this code off into it's own helper to clean up do_walk_down() a little
bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a flag we're passing around everywhere, add a field to
walk_control that we're already passing around everywhere and use that
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if our extent buffer isn't uptodate we will drop the lock,
free it, and then call read_tree_block() for the bytenr. This is
inefficient, we already have the extent buffer, we can simply call
btrfs_read_extent_buffer().
Merge these two cases down into one if statement, if we are not uptodate
we can drop the lock, trigger readahead, and do the read using
btrfs_read_extent_buffer(), and carry on.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do find_extent_buffer(), and then if we don't find the eb in cache we
call btrfs_find_create_tree_block(), which calls find_extent_buffer()
first and then allocates the extent buffer.
The reason we're doing this is because if we don't find the extent
buffer in cache we set reada = 1. However this doesn't matter, because
lower down we only trigger reada if !btrfs_buffer_uptodate(eb), which is
what the case would be if we didn't find the extent buffer in cache and
had to allocate it.
Clean this up to simply call btrfs_find_create_tree_block(), and then
use the fact that we're having to read the extent buffer off of disk to
go ahead and kick off readahead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the variable 'err', reuse the variable 'ret' by reinitializing it to
zero where necessary.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we fully clean a subvolume (not only delete its directory,
but fully clean all it's related data and root item), the associated
qgroup would not be removed.
We have "btrfs qgroup clear-stale" to handle such 0 level qgroups.
Change the behavior to automatically removie the qgroup of a fully
cleaned subvolume when possible:
- Full qgroup but still consistent
We can and should remove the qgroup.
The qgroup numbers should be 0, without any rsv.
- Full qgroup but inconsistent
Can happen with drop_subtree_threshold feature (skip accounting
and mark qgroup inconsistent).
We can and should remove the qgroup.
Higher level qgroup numbers will be incorrect, but since qgroup
is already inconsistent, it should not be a problem.
- Squota mode
This is the special case, we can only drop the qgroup if its numbers
are all 0.
This would be handled by can_delete_qgroup(), so we only need to check
the return value and ignore the -EBUSY error.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222847
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At lookup_extent_data_ref() we are incorrectly checking if we are at the
last slot of the last leaf in the extent tree. We are returning -ENOENT
if btrfs_next_leaf() returns a value greater than 1, but btrfs_next_leaf()
never returns anything greater than 1:
1) It returns < 0 on error;
2) 0 if there is a next leaf (or a new item was added to the end of the
current leaf after releasing the path);
3) 1 if there are no more leaves (and no new items were added to the last
leaf after releasing the path).
So fix this by checking if the return value is greater than zero instead
of being greater than one.
Fixes: 1618aa3c2e ("btrfs: simplify return variables in lookup_extent_data_ref()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's another return variable wret that is only passed to ret on
error, we can simply use ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
First, drop err instead reuse ret, choose to return the error instead of
goto fail and then return the same error. Do not initialize the ret
until where it has to be initialized. Slight logic change in handling
the btrfs_search_slot() and btrfs_next_leaf() return value.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A comment from Filipe on one of my previous cleanups brought my
attention to a new helper we have for getting the root id of a root,
which makes it easier to read in the code.
The changes where made with the following Coccinelle semantic patch:
// <smpl>
@@
expression E,E1;
@@
(
E->root_key.objectid = E1
|
- E->root_key.objectid
+ btrfs_root_id(E)
)
// </smpl>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
We only ever need to use this to get the level of the tree block ref, so
use the btrfs_delayed_ref_owner() helper, which returns the level for
the given reference.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that most of our elements are inside of btrfs_delayed_ref_node
directly and we have helpers for the delayed_data_ref bits, go ahead and
remove all direct usage of btrfs_delayed_data_ref and use the helpers
where needed.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass in all the elements for the backrefs as function
arguments, simply pass through the btrfs_delayed_ref_node and then
extract the values we need from that.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have all the information we need in our btrfs_delayed_ref_node, which
we already pass into __btrfs_free_extent. Drop the extra arguments and
just extract the values from btrfs_delayed_ref_node.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're just extracting the values from btrfs_delayed_ref_node and passing
them through, simply pass the btrfs_delayed_ref_node into
__btrfs_inc_extent_ref and shrink the function arguments.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two members are shared by both the tree refs and data refs, so
move them into btrfs_delayed_ref_node proper. This allows us to greatly
simplify the comparison code, as the shared refs always only sort on
parent, and the non shared refs always sort first on ref_root, and then
only data refs sort on their specific fields.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We consistently use ->num_bytes everywhere through the delayed ref code,
except in btrfs_ref. Rename btrfs_ref to match all the other code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all of the delayed ref information is in the delayed ref node,
drastically simplify the delayed ref tracepoints by simply passing in
the btrfs_delayed_ref_node and populating the tracepoints with the
values from the structure itself.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this in both btrfs_tree_ref and btrfs_data_ref, which is just
wasting space and making the code more complicated. Move this into
btrfs_ref proper and update all the call sites to do the assignment in
btrfs_ref.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ref currently has ->owning_root, and ->ref_root is shared between
the tree ref and data ref, so in order to move that into btrfs_ref
proper I would need to add another root parameter to the initialization
function. This function has too many arguments, and adding another root
will make it easy to make mistakes about which root goes where.
Drop the generic ref init function and statically initialize the
btrfs_ref in every usage. This makes the code easier to read because we
can see what elements we're assigning, and will make the upcoming change
moving the ref_root into the btrfs_ref more clear and less error prone
than adding a new element to the initialization function.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The __btrfs_tree_lock() and __btrfs_tree_read_lock() are using a naming
with a double underscore prefix, which is specially not proper for
exported functions. Remove the double underscore prefix from their name
and add the "_nested" suffix.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an ASSERT to catch a faulty delayed reference item resulting from
prematurely cleared extent buffer.
Also, add a WARN to detect if we try to dirty a ZEROOUT buffer again, which
is suspicious as its update will be lost.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_free_tree_block(), we are always initializing a delayed reference
to drop the given extent buffer but we only use if it does not belong to a
log root tree. So we are doing unnecessary work here and increasing the
duration of a critical section as this is normally called while holding a
lock on the parent tree block (if any) and while holding a log transaction
open.
So initialize the delayed reference only if the extent buffer is not from
a log tree, avoiding unnecessary work and making the code also a bit
easier to follow.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file extents are normally reserved in subvolume roots but could be
also in the data reloc tree. Change the BUG_ON to assertions as this
verifies the usage assumptions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check_committed_ref() helper looks up an extent item by a key,
allowing to do an inexact search when key->offset is -1. It's never
expected to find such item, as it would break the allowed range of a
extent item offset.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This helper is used in transaction abort or cleanup context and the
callers cannot handle all errors, only do best effort.
btrfs_cleanup_one_transaction
btrfs_destroy_delayed_refs
btrfs_error_unpin_extent_range
btrfs_destroy_pinned_extent
btrfs_error_unpin_extent_range
Signed-off-by: David Sterba <dsterba@suse.com>
Handle the lookup failure of the block group to unpin, this is a logic
error as the block group must exist at this point. If not, something else
must have freed it, like clean_pinned_extents() would do without locking
the unused_bg_unpin_mutex.
Push the errors to the callers, proper handling will be done in followup
patches.
Signed-off-by: David Sterba <dsterba@suse.com>
With help of neovim, LSP and clangd we can identify header files that
are not actually needed to be included in the .c files. This is focused
only on removal (with minor fixups), further cleanups are possible but
will require doing the header files properly with forward declarations,
minimized includes and include-what-you-use care.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a warning in btrfs_issue_discard() when the range is not aligned
to 512 bytes, originally added in 4d89d377bb ("btrfs:
btrfs_issue_discard ensure offset/length are aligned to sector
boundaries"). We can't do sub-sector writes anyway so the adjustment is
the only thing that we can do and the warning is unnecessary.
CC: stable@vger.kernel.org # 4.19+
Reported-by: syzbot+4a4f1eba14eb5c3417d1@syzkaller.appspotmail.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Writing sequentially to a huge file on btrfs on a SMR HDD revealed a
decline of the performance (220 MiB/s to 30 MiB/s after 500 minutes).
The performance goes down because of increased latency of the extent
allocation, which is induced by a traversing of a lot of full block groups.
So, this patch optimizes the ffe_ctl->hint_byte by choosing a block group
with sufficient size from the active block group list, which does not
contain full block groups.
After applying the patch, the performance is maintained well.
Fixes: 2eda57089e ("btrfs: zoned: implement sequential extent allocation")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out prepare_allocation_zoned() for further extension. While at
it, optimize the if-branch a bit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reflow btrfs_free_tree_block() so that there is one level of indentation
needed.
This patch has no functional changes.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not clearing the dirty flag off of extent_buffers in zoned mode,
all that is left of btrfs_redirty_list_add() is a memzero() and some
ASSERT()ions.
As we're also memzero()ing the buffer on write-out btrfs_redirty_list_add()
has become obsolete and can be removed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
EXTENT_BUFFER_ZONED_ZEROOUT better describes the state of the extent buffer,
namely it is written as all zeros. This is needed in zoned mode, to
preserve I/O ordering.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A reservation goes through a 3 step lifetime:
- generated during delalloc
- released/counted by ordered_extent allocation
- freed by running delayed ref
That third step depends on must_insert_reserved on the head ref, so the
head ref with that field set owns the reservation. Once you prepare to
run the head ref, must_insert_reserved is unset, which means that
running the ref must free the reservation, whether or not it succeeds,
or else the reservation is leaked. That results in either a risk of
spurious ENOSPC if the fs stays writeable or a warning on unmount if it
is readonly.
The existing squota code was aware of these invariants, but missed a few
cases. Improve it by adding a helper function to use in the cleanup
paths and call it from the existing early returns in running delayed
refs. This also simplifies btrfs_record_squota_delta and struct
btrfs_quota_delta.
This fixes (or at least improves the reliability of) generic/475 with
"mkfs -O squota". On my machine, that test failed ~4/10 times without
this patch and passed 100/100 times with it.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Dave reported a bug where we were aborting the transaction while trying
to cleanup the squota reservation for an extent.
This turned out to be because we're doing btrfs_header_owner(next) in
do_walk_down when we decide to free the block. However in this code
block we haven't explicitly read next, so it could be stale. We would
then get whatever garbage happened to be in the pages at this point.
The commit that introduced that is "btrfs: track owning root in
btrfs_ref".
Fix this by saving the owner_root when we do the
btrfs_lookup_extent_info(). We always do this in do_walk_down, it is
how we make the decision of whether or not to delete the block. This is
cheap because we've already done the extent item lookup at this point,
so it's straightforward to just grab the owner root as well.
Then we can use this when deleting the metadata block without needing to
force a read of the extent buffer to find the owner.
This fixes the problem that Dave reported.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Relocation data allocations are quite tricky for simple quotas. The
basic data relocation sequence is (ignoring details that aren't relevant
to this fix):
- create a fake relocation data fs root
- create a fake relocation inode in that root
- for each data extent:
- preallocate a data extent on behalf of the fake inode
- copy over the data
- for each extent
- swap the refs so that the original file extent now refers to the new
extent item
- drop the fake root, dropping its refs on the old extents, which lets
us delete them.
Done naively, this results in storing an extent item in the extent tree
whose owner_ref points at the relocation data root and a no-op squota
recording, since the reloc root is not a legit fstree. So far, that's
OK. The problem comes when you do the swap, and leave an extent item
owned by this bogus root as the real permanent extents of the file. If
the file then drops that ref, we free it and no-op account that against
the fake relocation root. Essentially, this means that relocation is
simple quota "extent laundering", since we re-own the extents into a
fake root.
Simple quotas very intentionally doesn't have a mechanism for
transferring ownership of extents, as that is exactly the complicated
thing we are trying to avoid with the new design. Further, it cannot be
correctly done in this case, since at the time you create the new
"real" refs, there is no way to know which was the original owner before
relocation unless we track it.
Therefore, it makes more sense to trick the preallocation to handle
relocation as a special case and note the proper owner ref from the
beginning. That way, we never write out an extent item without the
correct owner ref that it will eventually have.
This could be done by wiring a special root parameter all the way
through the allocation code path, but to avoid that special case
touching all the code, take advantage of the serial nature of relocation
to store the src root on the relocation root object. Then when we finish
the prealloc, if it happens to be this case, prepare the delayed ref
appropriately.
We must also add logic to handle relocating adjacent extents with
different owning roots. Those cannot be preallocated together in a
cluster as it would lose the separate ownership information.
This is obviously a smelly bit of code, but I think it is the best
solution to the problem, given the relocation implementation.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Relocation COWs metadata blocks in two cases for the reloc root:
- copying the subvolume root item when creating the reloc root
- copying a btree node when there is a COW during relocation
In both cases, the resulting btree node hits an abnormal code path with
respect to the owner field in its btrfs_header. It first creates the
root item for the new objectid, which populates the reloc root id, and
it at this point that delayed refs are created.
Later, it fully copies the old node into the new node (including the
original owner field) which overwrites it. This results in a simple
quotas mismatch where we run the delayed ref for the reloc root which
has no simple quota effect (reloc root is not an fstree) but when we
ultimately delete the node, the owner is the real original fstree and we
do free the space.
To work around this without tampering with the behavior of relocation,
add a parameter to btrfs_add_tree_block that lets the relocation code
path specify a different owning root than the "operating" root (in this
case, owning root is the real root and the operating root is the reloc
root). These can naturally be plumbed into delayed refs that have the
same concept.
Note that this is a double count in some sense, but a relatively natural
one, as there are really two extents, and the old one will be deleted
soon. This is consistent with how data relocation extents are accounted
by simple quotas.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Simple quotas count extents only from the moment the feature is enabled.
Therefore, if we do something like:
1. create subvol S
2. write F in S
3. enable quotas
4. remove F
5. write G in S
then after 3. and 4. we would expect the simple quota usage of S to be 0
(putting aside some metadata extents that might be written) and after
5., it should be the size of G plus metadata. Therefore, we need to be
able to determine whether a particular quota delta we are processing
predates simple quota enablement.
To do this, store the transaction id when quotas were enabled. In
fs_info for immediate use and in the quota status item to make it
recoverable on mount. When we see a delta, check if the generation of
the extent item is less than that of quota enablement. If so, we should
ignore the delta from this extent.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
At the moment that we run delayed refs, we make the final ref-count
based decision on creating/removing extent (and metadata) items.
Therefore, it is exactly the spot to hook up simple quotas.
There are a few important subtleties to the fields we must collect to
accurately track simple quotas, particularly when removing an extent.
When removing a data extent, the ref could be in any tree (due to
reflink, for example) and so we need to recover the owning root id from
the owner ref item. When removing a metadata extent, we know the owning
root from the owner field in the header when we create the delayed ref,
so we can recover it from there.
We must also be careful to handle reservations properly to not leaked
reserved space. The happy path is freeing the reservation when the
simple quota delta runs on a data extent. If that doesn't happen, due to
refs canceling out or some error, the ref head already has the
must_insert_reserved machinery to handle this, so we piggy back on that
and use it to clean up the reserved data.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
