mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-29 09:14:10 +00:00
b67067f117
649 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
c8d0267efd |
PCI changes for the v4.8 merge window:
Enumeration
Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
Add parent device field to ECAM struct pci_config_window (Jayachandran C)
Add generic MCFG table handling (Tomasz Nowicki)
Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management
Add devm_request_pci_bus_resources() (Bjorn Helgaas)
Unify pci_resource_to_user() declarations (Bjorn Helgaas)
Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
Ignore write combining when mapping I/O port space (Bjorn Helgaas)
Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
Support I/O resources when parsing host bridge resources (Jayachandran C)
Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug
Allow additional bus numbers for hotplug bridges (Keith Busch)
Ignore interrupts during D3cold (Lukas Wunner)
Power management
Enforce type casting for pci_power_t (Andy Shevchenko)
Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
Put PCIe ports into D3 during suspend (Mika Westerberg)
Power on bridges before scanning new devices (Mika Westerberg)
Runtime resume bridge before rescan (Mika Westerberg)
Add runtime PM support for PCIe ports (Mika Westerberg)
Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization
Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI
Fix PCI_MSI dependencies (Arnd Bergmann)
Add pci_msix_desc_addr() helper (Christoph Hellwig)
Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling
Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
Remove DPC tristate module option (Keith Busch)
Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver
Select IRQ_DOMAIN (Arnd Bergmann)
Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver
Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver
Check link status before retrain link (Ley Foon Tan)
Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver
Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver
Use lock save/restore in interrupt enable path (Jon Derrick)
Select device dma ops to override (Keith Busch)
Initialize list item in IRQ disable (Keith Busch)
Use x86_vector_domain as parent domain (Keith Busch)
Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver
Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
Add Aardvark PCI host controller driver (Thomas Petazzoni)
Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver
Fix interrupt cleanup path (Cathy Avery)
Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver
Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
Use lower-case hex consistently for register definitions (Thierry Reding)
Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver
Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver
Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver
Fix return value in case of error (Christophe JAILLET)
Miscellaneous
Make bus_attr_resource_alignment static (Ben Dooks)
Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
Make host bridge drivers explicitly non-modular (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NVxu
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Highlights:
- ARM64 support for ACPI host bridges
- new drivers for Axis ARTPEC-6 and Marvell Aardvark
- new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx
- pci_resource_to_user() cleanup (more to come)
Detailed summary:
Enumeration:
- Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
- Add parent device field to ECAM struct pci_config_window (Jayachandran C)
- Add generic MCFG table handling (Tomasz Nowicki)
- Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
- Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management:
- Add devm_request_pci_bus_resources() (Bjorn Helgaas)
- Unify pci_resource_to_user() declarations (Bjorn Helgaas)
- Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
- Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
- Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
- Ignore write combining when mapping I/O port space (Bjorn Helgaas)
- Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
- Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
- Support I/O resources when parsing host bridge resources (Jayachandran C)
- Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
- Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
- Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
- Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
- Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
- Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
- Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
- Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug:
- Allow additional bus numbers for hotplug bridges (Keith Busch)
- Ignore interrupts during D3cold (Lukas Wunner)
Power management:
- Enforce type casting for pci_power_t (Andy Shevchenko)
- Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
- Put PCIe ports into D3 during suspend (Mika Westerberg)
- Power on bridges before scanning new devices (Mika Westerberg)
- Runtime resume bridge before rescan (Mika Westerberg)
- Add runtime PM support for PCIe ports (Mika Westerberg)
- Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization:
- Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
- Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
- Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
- Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI:
- Fix PCI_MSI dependencies (Arnd Bergmann)
- Add pci_msix_desc_addr() helper (Christoph Hellwig)
- Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
- Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
- Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
- Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling:
- Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
- Remove DPC tristate module option (Keith Busch)
- Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver:
- Select IRQ_DOMAIN (Arnd Bergmann)
- Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver:
- Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
- Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
- Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
- Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver:
- Check link status before retrain link (Ley Foon Tan)
- Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver:
- Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
- Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
- Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver:
- Use lock save/restore in interrupt enable path (Jon Derrick)
- Select device dma ops to override (Keith Busch)
- Initialize list item in IRQ disable (Keith Busch)
- Use x86_vector_domain as parent domain (Keith Busch)
- Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver:
- Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
- Add Aardvark PCI host controller driver (Thomas Petazzoni)
- Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver:
- Fix interrupt cleanup path (Cathy Avery)
- Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
- Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver:
- Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
- Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
- Use lower-case hex consistently for register definitions (Thierry Reding)
- Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
- Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver:
- Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Miscellaneous:
- Make bus_attr_resource_alignment static (Ben Dooks)
- Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
- MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
- Make host bridge drivers explicitly non-modular (Paul Gortmaker)"
* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
PCI: xgene: Make explicitly non-modular
PCI: thunder-pem: Make explicitly non-modular
PCI: thunder-ecam: Make explicitly non-modular
PCI: tegra: Make explicitly non-modular
PCI: rcar-gen2: Make explicitly non-modular
PCI: rcar: Make explicitly non-modular
PCI: mvebu: Make explicitly non-modular
PCI: layerscape: Make explicitly non-modular
PCI: keystone: Make explicitly non-modular
PCI: hisi: Make explicitly non-modular
PCI: generic: Make explicitly non-modular
PCI: designware-plat: Make it explicitly non-modular
PCI: artpec6: Make explicitly non-modular
PCI: armada8k: Make explicitly non-modular
PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
PCI: Add ACS quirk for Solarflare SFC9220
arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
PCI: aardvark: Add Aardvark PCI host controller driver
dt-bindings: add DT binding for the Aardvark PCIe controller
PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
...
|
||
|
|
9454c23852 |
Merge branch 'pci/msi-affinity' into next
Conflicts: drivers/nvme/host/pci.c |
||
|
|
79dd993461 |
Merge branches 'pci/demodularize-hosts' and 'pci/host-request-windows' into next
* pci/demodularize-hosts: PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller PCI: generic: Select IRQ_DOMAIN * pci/host-request-windows: PCI: versatile: Simplify host bridge window iteration PCI: versatile: Request host bridge window resources with core function PCI: tegra: Request host bridge window resources with core function PCI: tegra: Remove top-level resource from hierarchy PCI: rcar: Simplify host bridge window iteration PCI: rcar: Request host bridge window resources with core function PCI: rcar Gen2: Request host bridge window resources PCI: rcar: Drop gen2 dummy I/O port region ARM: Make PCI I/O space optional PCI: mvebu: Request host bridge window resources with core function PCI: generic: Simplify host bridge window iteration PCI: generic: Request host bridge window resources with core function PCI: altera: Simplify host bridge window iteration PCI: altera: Request host bridge window resources with core function PCI: xilinx-nwl: Use dev_printk() when possible PCI: xilinx-nwl: Request host bridge window resources PCI: xilinx-nwl: Free bridge resource list on failure PCI: xilinx: Request host bridge window resources PCI: xilinx: Free bridge resource list on failure PCI: xgene: Request host bridge window resources PCI: xgene: Free bridge resource list on failure PCI: iproc: Request host bridge window resources PCI: designware: Simplify host bridge window iteration PCI: designware: Request host bridge window resources PCI: designware: Free bridge resource list on failure PCI: Add devm_request_pci_bus_resources() |
||
|
|
3efc702378 |
Merge branch 'pci/resource' into next
* pci/resource: unicore32/PCI: Remove pci=firmware command line parameter handling ARM/PCI: Remove arch-specific pcibios_enable_device() ARM64/PCI: Remove arch-specific pcibios_enable_device() MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: Add generic pci_bus_claim_resources() alx: Use pci_(request|release)_mem_regions ethernet/intel: Use pci_(request|release)_mem_regions GenWQE: Use pci_(request|release)_mem_regions lpfc: Use pci_(request|release)_mem_regions NVMe: Use pci_(request|release)_mem_regions PCI: Add helpers to request/release memory and I/O regions PCI: Extending pci=resource_alignment to specify device/vendor IDs sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus() microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() PCI: Unify pci_resource_to_user() declarations microblaze/PCI: Remove useless __pci_mmap_set_pgprot() powerpc/pci: Remove __pci_mmap_set_pgprot() PCI: Ignore write combining when mapping I/O port space |
||
|
|
a00c74c166 |
Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182 |
||
|
|
e16b466059 |
PCI: Allow additional bus numbers for hotplug bridges
A user may hot add a switch requiring more than one bus to enumerate. This previously required a system reboot if BIOS did not sufficiently pad the bus resource, which they frequently don't do. Add a kernel parameter so a user can specify the minimum number of bus numbers to reserve for a hotplug bridge's subordinate buses so rebooting won't be necessary. The default is 1, which is equivalent to previous behavior. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
4ef33685aa |
PCI: Spread interrupt vectors in pci_alloc_irq_vectors()
Set the affinity_mask in the PCI device before allocating vectors so that the affinity can be propagated through the MSI descriptor structures to the core IRQ code. To facilitate this, new __pci_enable_msi_range() and __pci_enable_msix_range() helpers are factored out of their not prefixed variants which assigning the new IRQ affinity mask in the PCI device so that the low-level interrupt code can perform the interrupt affinity assignment and do node-local allocations. A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that this function can also be used by drivers that don't wish to use the automatic affinity assignment. [bhelgaas: omit "else" after "return" consistently] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com> |
||
|
|
aff171641d |
PCI: Provide sensible IRQ vector alloc/free routines
Add a function to allocate and free a range of interrupt vectors, using MSI-X, MSI or legacy vectors (in that order) based on the capabilities of the underlying device and PCIe complex. Additionally a new helper is provided to get the Linux IRQ number for given device-relative vector so that the drivers don't need to allocate their own arrays to keep track of the vectors for the multi vector MSI-X case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com> |
||
|
|
765bf9b739 |
PCI: Add generic pci_bus_claim_resources()
All PCI resources (bridge windows and BARs) should be inserted in the iomem_resource and ioport_resource trees so we know what space is occupied and what is available for other devices. There's nothing arch-specific about this, but it is currently done by arch-specific code. Add a generic pci_bus_claim_resources() interface so we can migrate away from the arch-specific code. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Yinghai Lu <yinghai@kernel.org> |
||
|
|
be9d2e8927 |
PCI: Add helpers to request/release memory and I/O regions
Add helpers to request and release a device's memory or I/O regions. With these helpers in place, one does not need to select a device's memory or I/O regions with pci_select_bars() prior to requesting or releasing them. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
||
|
|
d366d28cd1 |
PCI: Add pcibios_setup_bridge()
Currently, PowerPC PowerNV platform utilizes ppc_md.pcibios_fixup(), which is called for once after PCI probing and resource assignment are completed, to allocate platform required resources for PCI devices: PE#, IO and MMIO mapping, DMA address translation (TCE) table etc. Obviously, it's not hotplug friendly. This adds weak function pcibios_setup_bridge(), which is called by pci_setup_bridge(). PowerPC PowerNV platform will reuse the function to assign above platform required resources to newly plugged PCI devices during PCI hotplug in subsequent patches. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|
|
224abb67e6 |
PCI: Document connection between pci_power_t and hardware PM capability
The dev.pme_support field, pci_pm_init(), pci_pme_capable(), and pci_raw_set_power_state() depend on the fact that the pci_power_t values (PCI_D0, PCI_D1, etc.) match the definition of the Capabilities PME_Support and the Control/Status PowerState fields in the Power Management capability (see PCI Bus Power Management spec r1.2, sec 3.2.3). Add a note to this effect at the pci_power_t typedef. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
|
|
8221a01352 |
PCI: Unify pci_resource_to_user() declarations
Replace the pci_resource_to_user() declarations in each arch that defines HAVE_ARCH_PCI_RESOURCE_TO_USER with a single one in linux/pci.h. Change the MIPS static inline implementation to a non-inline version so the static inline doesn't conflict with the new non-static linux/pci.h declaration. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
9d26d3a8f1 |
PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered. Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.
With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:
- The PCIe port hardware is recent enough, starting from 2015.
- Devices connected to PCIe ports are effectively in D3cold once the port
is transitioned to D3 (the config space is not accessible anymore and
the link may be powered down).
- Devices behind the PCIe port need to be allowed to transition to D3cold
and back. There is a way both drivers and userspace can forbid this.
- If the device behind the PCIe port is capable of waking the system it
needs to be able to do so from D3cold.
This patch adds a new flag to struct pci_device called 'bridge_d3'. This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port. When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.
Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.
Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
|
9661e783d8 |
PCI / PM: Enforce type casting for pci_power_t
When casting variables of type pci_power_t, a static analysis tool complains: include/linux/pci.h:119:37: warning: cast from restricted pci_power_t Enforce type casting to make the static analyzer happy. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
2ab51ddeca |
ARM64: PCI: Add acpi_pci_bus_find_domain_nr()
Extend pci_bus_find_domain_nr() so it can find the domain from either: - ACPI, via the new acpi_pci_bus_find_domain_nr() interface, or - DT, via of_pci_bus_find_domain_nr() Note that this is only used for CONFIG_PCI_DOMAINS_GENERIC=y, so it does not affect x86 or ia64. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
9c7cb891ec |
PCI: Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC
Instead of assigning bus->domain_nr inside pci_bus_assign_domain_nr(), return the domain and let the caller do the assignment. Rename pci_bus_assign_domain_nr() to pci_bus_find_domain_nr() to reflect this. No functional change intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
|
|
935c760ec8 |
PCI/ACPI: Add generic MCFG table handling
On ACPI systems that support memory-mapped config space access, i.e., ECAM, the PCI Firmware Specification says the OS can learn where the ECAM space is from either: - the static MCFG table (for non-hotpluggable bridges), or - the _CBA method (for hotpluggable bridges) The current MCFG table handling code cannot be easily generalized owing to x86-specific quirks, which makes it hard to reuse on other architectures. Implement generic MCFG handling from scratch, including: - Simple MCFG table parsing (via pci_mmcfg_late_init() as in current x86) - MCFG region lookup for a (domain, bus_start, bus_end) tuple [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
|
|
4d3f138459 |
PCI: Add pci_unmap_iospace() to unmap I/O resources
Add pci_unmap_iospace() to undo what pci_remap_iospace() did. This is needed to support hotplug removal of host bridges that use pci_remap_iospace(). [bhelgaas: changelog] Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
|
|
950334bcf1 |
PCI: Add devm_request_pci_bus_resources()
Several host bridge drivers iterate through the list of bridge windows to request resources. Several others don't request the window resources at all. Add a devm_request_pci_bus_resources() interface to make it easier for drivers to request all the window resources. Export to GPL modules (from Arnd Bergmann <arnd@arndb.de>). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
7afd16f882 |
PCI changes for the v4.7 merge window:
Enumeration
Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
Provide common functions for ECAM mapping (Jayachandran C)
Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
Add Downstream Port Containment portdrv service type (Keith Busch)
Add Downstream Port Containment driver (Keith Busch)
Resource management
Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
PCI device hotplug
acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
Virtualization
Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
IOMMU
Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
Add support for multiple DMA aliases (Jacek Lawrynowicz)
Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
Thunderbolt
Fix double free of drom buffer (Andreas Noever)
Add Intel Thunderbolt device IDs (Lukas Wunner)
Fix typos and magic number (Lukas Wunner)
Support 1st gen Light Ridge controller (Lukas Wunner)
Generic host bridge driver
Use generic ECAM API (Jayachandran C)
Cavium ThunderX host bridge driver
Don't clobber read-only bits in bridge config registers (David Daney)
Use generic ECAM API (Jayachandran C)
Freescale i.MX6 host bridge driver
Use enum instead of bool for variant indicator (Andrey Smirnov)
Implement reset sequence for i.MX6+ (Andrey Smirnov)
Factor out ref clock enable (Bjorn Helgaas)
Add initial imx6sx support (Christoph Fritz)
Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
Add DT property for link gen, default to Gen1 (Tim Harvey)
dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
Marvell Armada host bridge driver
add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Marvell MVEBU host bridge driver
Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
Microsoft Hyper-V host bridge driver
Report resources release after stopping the bus (Vitaly Kuznetsov)
Add explicit barriers to config space access (Vitaly Kuznetsov)
Renesas R-Car host bridge driver
Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
Synopsys DesignWare host bridge driver
Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
TI Keystone host bridge driver
Add error IRQ handler (Murali Karicheri)
Remove unnecessary goto statement (Murali Karicheri)
Miscellaneous
Fix spelling errors (Colin Ian King)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=68Iz
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
- Provide common functions for ECAM mapping (Jayachandran C)
- Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
- Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
- Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
- Add Downstream Port Containment portdrv service type (Keith Busch)
- Add Downstream Port Containment driver (Keith Busch)
Resource management:
- Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
- Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
- alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
- Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
- Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
PCI device hotplug:
- acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
- Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
Virtualization:
- Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
- Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
- Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
IOMMU:
- Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
- Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
- Add support for multiple DMA aliases (Jacek Lawrynowicz)
- Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
Thunderbolt:
- Fix double free of drom buffer (Andreas Noever)
- Add Intel Thunderbolt device IDs (Lukas Wunner)
- Fix typos and magic number (Lukas Wunner)
- Support 1st gen Light Ridge controller (Lukas Wunner)
Generic host bridge driver:
- Use generic ECAM API (Jayachandran C)
Cavium ThunderX host bridge driver:
- Don't clobber read-only bits in bridge config registers (David Daney)
- Use generic ECAM API (Jayachandran C)
Freescale i.MX6 host bridge driver:
- Use enum instead of bool for variant indicator (Andrey Smirnov)
- Implement reset sequence for i.MX6+ (Andrey Smirnov)
- Factor out ref clock enable (Bjorn Helgaas)
- Add initial imx6sx support (Christoph Fritz)
- Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
- Add DT property for link gen, default to Gen1 (Tim Harvey)
- dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
- dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
Marvell Armada host bridge driver:
- add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
- Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Marvell MVEBU host bridge driver:
- Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
- Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
Microsoft Hyper-V host bridge driver:
- Report resources release after stopping the bus (Vitaly Kuznetsov)
- Add explicit barriers to config space access (Vitaly Kuznetsov)
Renesas R-Car host bridge driver:
- Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
Synopsys DesignWare host bridge driver:
- Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
- Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
TI Keystone host bridge driver:
- Add error IRQ handler (Murali Karicheri)
- Remove unnecessary goto statement (Murali Karicheri)
Miscellaneous:
- Fix spelling errors (Colin Ian King)"
* tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
PCI: Disable all BAR sizing for devices with non-compliant BARs
x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
PCI, of: Move PCI I/O space management to PCI core code
PCI: generic, thunder: Use generic ECAM API
PCI: Provide common functions for ECAM mapping
PCI: hv: Add explicit barriers to config space access
PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
PCI: Add Downstream Port Containment driver
PCI: Add Downstream Port Containment portdrv service type
PCI: Widen portdrv service type from 4 bits to 8 bits
PCI: designware: Remove incorrect RC memory base/limit configuration
PCI: hv: Report resources release after stopping the bus
ARM: dts: imx6qp: Specify imx6qp version of PCIe core
PCI: imx6: Implement reset sequence for i.MX6+
PCI: imx6: Use enum instead of bool for variant indicator
PCI: thunder: Don't clobber read-only bits in bridge config registers
thunderbolt: Fix double free of drom buffer
PCI: rcar: Select PCI_MSI_IRQ_DOMAIN
PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller
...
|
||
|
|
e257ef55ce |
Merge branches 'pci/arm64' and 'pci/host-hv' into next
* pci/arm64: PCI, of: Move PCI I/O space management to PCI core code PCI: generic, thunder: Use generic ECAM API PCI: Provide common functions for ECAM mapping * pci/host-hv: PCI: hv: Add explicit barriers to config space access |
||
|
|
c5076cfe76 |
PCI, of: Move PCI I/O space management to PCI core code
No functional changes in this patch. PCI I/O space mapping code does not depend on OF; therefore it can be moved to PCI core code. This way we will be able to use it, e.g., in ACPI PCI code. Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Liviu Dudau <Liviu.Dudau@arm.com> |
||
|
|
7f768544c2 |
Merge branches 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/ntb', 'pci/thunderbolt' and 'pci/virtualization' into next
* pci/enumeration: x86/PCI: Refine PCI support check in pcibios_init() * pci/hotplug: PCI: acpiphp_ibm: Avoid uninitialized variable reference * pci/misc: PCI: Fix spelling errors * pci/ntb: PCI: Add DMA alias quirk for mic_x200_dma PCI: Add support for multiple DMA aliases PCI: Move informational printk to pci_add_dma_alias() PCI: Add pci_add_dma_alias() to abstract implementation * pci/thunderbolt: thunderbolt: Support 1st gen Light Ridge controller thunderbolt: Fix typos and magic number PCI: Add Intel Thunderbolt device IDs * pci/virtualization: PCI: Work around Intel Sunrise Point PCH incorrect ACS capability PCI: Reverse standard ACS vs device-specific ACS enabling PCI: Mark Intel i40e NIC INTx masking as broken |
||
|
|
c1d61c9bb1 |
PCI: Reverse standard ACS vs device-specific ACS enabling
The original thought was that if a device implemented ACS, then surely we want to use that... well, it turns out that devices can make an ACS capability so broken that we still need to fall back to quirks. Reverse the order of ACS enabling to give quirks first shot at it. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
cb92148b58 |
PCI: Add pci_set_vpd_size() to set VPD size
After |
||
|
|
338c3149a2 |
PCI: Add support for multiple DMA aliases
Solve IOMMU support issues with PCIe non-transparent bridges that use Requester ID look-up tables (RID-LUT), e.g., the PEX8733. The NTB connects devices in two independent PCI domains. Devices separated by the NTB are not able to discover each other. A PCI packet being forwared from one domain to another has to have its RID modified so it appears on correct bus and completions are forwarded back to the original domain through the NTB. The RID is translated using a preprogrammed table (LUT) and the PCI packet propagates upstream away from the NTB. If the destination system has IOMMU enabled, the packet will be discarded because the new RID is unknown to the IOMMU. Adding a DMA alias for the new RID allows IOMMU to properly recognize the packet. Each device behind the NTB has a unique RID assigned in the RID-LUT. The current DMA alias implementation supports only a single alias, so it's not possible to support mutiple devices behind the NTB when IOMMU is enabled. Enable all possible aliases on a given bus (256) that are stored in a bitset. Alias devfn is directly translated to a bit number. The bitset is not allocated for devices that have no need for DMA aliases. More details can be found in the following article: http://www.plxtech.com/files/pdf/technical/expresslane/RTC_Enabling%20MulitHostSystemDesigns.pdf Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> |
||
|
|
f0af959337 |
PCI: Add pci_add_dma_alias() to abstract implementation
Add a pci_add_dma_alias() interface to encapsulate the details of adding an alias. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
|
d5e2d00898 |
powerpc updates for 4.6
Highlights:
- Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras
- Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V
- Add POWER9 cputable entry from Michael Neuling
- FPU/Altivec/VSX save/restore optimisations from Cyril Bur
- Add support for new ftrace ABI on ppc64le from Torsten Duwe
Various cleanups & minor fixes from:
- Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril
Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey,
Sukadev Bhattiprolu, Suraj Jitindar Singh.
General:
- atomics: Allow architectures to define their own __atomic_op_* helpers from
Boqun Feng
- Implement atomic{, 64}_*_return_* variants and acquire/release/relaxed
variants for (cmp)xchg from Boqun Feng
- Add powernv_defconfig from Jeremy Kerr
- Fix BUG_ON() reporting in real mode from Balbir Singh
- Add xmon command to dump OPAL msglog from Andrew Donnellan
- Add xmon command to dump process/task similar to ps(1) from Douglas Miller
- Clean up memory hotplug failure paths from David Gibson
pci/eeh:
- Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei
Yang.
- EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
- PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
- PCI: Add pcibios_bus_add_device() weak function from Wei Yang
- MAINTAINERS: Update EEH details and maintainership from Russell Currey
cxl:
- Support added to the CXL driver for running on both bare-metal and
hypervisor systems, from Christophe Lombard and Frederic Barrat.
- Ignore probes for virtual afu pci devices from Vaibhav Jain
perf:
- Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu
- hv-24x7: Fix usage with chip events, display change in counter values,
display domain indices in sysfs, eliminate domain suffix in event names,
from Sukadev Bhattiprolu
Freescale:
- Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum
optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and
other dt bits, and minor fixes/cleanup."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qkAt
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This was delayed a day or two by some build-breakage on old toolchains
which we've now fixed.
There's two PCI commits both acked by Bjorn.
There's one commit to mm/hugepage.c which is (co)authored by Kirill.
Highlights:
- Restructure Linux PTE on Book3S/64 to Radix format from Paul
Mackerras
- Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
Kumar K.V
- Add POWER9 cputable entry from Michael Neuling
- FPU/Altivec/VSX save/restore optimisations from Cyril Bur
- Add support for new ftrace ABI on ppc64le from Torsten Duwe
Various cleanups & minor fixes from:
- Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.
General:
- atomics: Allow architectures to define their own __atomic_op_*
helpers from Boqun Feng
- Implement atomic{, 64}_*_return_* variants and acquire/release/
relaxed variants for (cmp)xchg from Boqun Feng
- Add powernv_defconfig from Jeremy Kerr
- Fix BUG_ON() reporting in real mode from Balbir Singh
- Add xmon command to dump OPAL msglog from Andrew Donnellan
- Add xmon command to dump process/task similar to ps(1) from Douglas
Miller
- Clean up memory hotplug failure paths from David Gibson
pci/eeh:
- Redesign SR-IOV on PowerNV to give absolute isolation between VFs
from Wei Yang.
- EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
- PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
- PCI: Add pcibios_bus_add_device() weak function from Wei Yang
- MAINTAINERS: Update EEH details and maintainership from Russell
Currey
cxl:
- Support added to the CXL driver for running on both bare-metal and
hypervisor systems, from Christophe Lombard and Frederic Barrat.
- Ignore probes for virtual afu pci devices from Vaibhav Jain
perf:
- Export Power8 generic and cache events to sysfs from Sukadev
Bhattiprolu
- hv-24x7: Fix usage with chip events, display change in counter
values, display domain indices in sysfs, eliminate domain suffix in
event names, from Sukadev Bhattiprolu
Freescale:
- Updates from Scott: "Highlights include 8xx optimizations, 32-bit
checksum optimizations, 86xx consolidation, e5500/e6500 cpu
hotplug, more fman and other dt bits, and minor fixes/cleanup"
* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc: Fix unrecoverable SLB miss during restore_math()
powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
powerpc/rcpm: Fix build break when SMP=n
powerpc/book3e-64: Use hardcoded mttmr opcode
powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
powerpc/T104xRDB: add tdm riser card node to device tree
powerpc32: PAGE_EXEC required for inittext
powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
powerpc/86xx: Introduce and use common dtsi
powerpc/86xx: Update device tree
powerpc/86xx: Move dts files to fsl directory
powerpc/86xx: Switch to kconfig fragments approach
powerpc/86xx: Update defconfigs
powerpc/86xx: Consolidate common platform code
powerpc32: Remove one insn in mulhdu
powerpc32: small optimisation in flush_icache_range()
powerpc: Simplify test in __dma_sync()
powerpc32: move xxxxx_dcache_range() functions inline
powerpc32: Remove clear_pages() and define clear_page() inline
...
|
||
|
|
63e30271b0 |
PCI changes for the v4.6 merge window:
Enumeration
Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management
Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
Don't assign or reassign immutable resources (Bjorn Helgaas)
Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization
Wait for up to 1000ms after FLR reset (Alex Williamson)
Support SR-IOV on any function type (Kelly Zytaruk)
Add ACS quirk for all Cavium devices (Manish Jaggi)
AER
Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
Restore pci_ops pointer while calling original pci_ops (David Daney)
Fix aer_inject error codes (Jean Delvare)
Use dev_warn() in aer_inject (Jean Delvare)
Log actual error causes in aer_inject (Jean Delvare)
Log aer_inject error injections (Jean Delvare)
VPD
Prevent VPD access for buggy devices (Babu Moger)
Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
Update VPD definitions (Hannes Reinecke)
Allow access to VPD attributes with size 0 (Hannes Reinecke)
Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver
Move structure definitions to separate header file (David Daney)
Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver
Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver
Add PCIe host driver for ThunderX processors (David Daney)
Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver
Add DT bindings to configure PHY Tx driver settings (Justin Waters)
Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
Remove broken Gen2 workaround (Lucas Stach)
Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver
Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver
Attach VMD resources to parent domain's resource tree (Jon Derrick)
Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver
Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
Look up IRQ domain by fwnode_handle (Jake Oshins)
Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver
Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
Implement ->{add,remove}_bus() callbacks (Thierry Reding)
Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
Track bus -> CPU mapping (Thierry Reding)
Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver
Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver
ARC: Add PCI support (Joao Pinto)
Add generic dw_pcie_wait_for_link() (Joao Pinto)
Add default link up check if sub-driver doesn't override (Joao Pinto)
Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver
Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver
Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver
Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous
Check device_attach() return value always (Bjorn Helgaas)
Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
Move pci_dma_* helpers to common code (Christoph Hellwig)
Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=otsF
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for v4.6:
Enumeration:
- Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management:
- Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
- Don't assign or reassign immutable resources (Bjorn Helgaas)
- Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
- Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
- Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
- ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
- ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
- Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
- rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
- designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization:
- Wait for up to 1000ms after FLR reset (Alex Williamson)
- Support SR-IOV on any function type (Kelly Zytaruk)
- Add ACS quirk for all Cavium devices (Manish Jaggi)
AER:
- Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
- Restore pci_ops pointer while calling original pci_ops (David Daney)
- Fix aer_inject error codes (Jean Delvare)
- Use dev_warn() in aer_inject (Jean Delvare)
- Log actual error causes in aer_inject (Jean Delvare)
- Log aer_inject error injections (Jean Delvare)
VPD:
- Prevent VPD access for buggy devices (Babu Moger)
- Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
- Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
- Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
- Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
- Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
- Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
- Update VPD definitions (Hannes Reinecke)
- Allow access to VPD attributes with size 0 (Hannes Reinecke)
- Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver:
- Move structure definitions to separate header file (David Daney)
- Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
- Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver:
- Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver:
- Add PCIe host driver for ThunderX processors (David Daney)
- Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver:
- Add DT bindings to configure PHY Tx driver settings (Justin Waters)
- Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
- Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
- Remove broken Gen2 workaround (Lucas Stach)
- Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver:
- Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver:
- Attach VMD resources to parent domain's resource tree (Jon Derrick)
- Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver:
- Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
- Look up IRQ domain by fwnode_handle (Jake Oshins)
- Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver:
- Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
- Implement ->{add,remove}_bus() callbacks (Thierry Reding)
- Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
- Track bus -> CPU mapping (Thierry Reding)
- Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver:
- Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver:
- ARC: Add PCI support (Joao Pinto)
- Add generic dw_pcie_wait_for_link() (Joao Pinto)
- Add default link up check if sub-driver doesn't override (Joao Pinto)
- Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver:
- Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver:
- Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
- Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
- Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
- Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
- microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver:
- Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous:
- Check device_attach() return value always (Bjorn Helgaas)
- Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
- Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
- Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
- unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
- Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
- Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
- Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
- frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
- Move pci_dma_* helpers to common code (Christoph Hellwig)
- Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
- Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
- Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"
* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: designware: Add driver for prototyping kits based on ARC SDP
PCI: designware: Add default link up check if sub-driver doesn't override
PCI: designware: Add generic dw_pcie_wait_for_link()
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Simplify pci_create_attr() control flow
PCI: Don't leak memory if sysfs_create_bin_file() fails
PCI: Simplify sysfs ROM cleanup
PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
ia64/PCI: Use ioremap() instead of open-coded equivalent
ia64/PCI: Use temporary struct resource * to avoid repetition
PCI: Clean up pci_map_rom() whitespace
PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
PCI: thunder: Add PCIe host driver for ThunderX processors
PCI: generic: Expose pci_host_common_probe() for use by other drivers
PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
...
|
||
|
|
6e6f498b03 |
Merge branch 'pci/resource' into next
* pci/resource: PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: Set ROM shadow location in arch code, not in PCI core PCI: Don't enable/disable ROM BAR if we're using a RAM shadow copy PCI: Don't assign or reassign immutable resources PCI: Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs PCI: Disable IO/MEM decoding for devices with non-compliant BARs |
||
|
|
cfeb8139a1 |
Merge branch 'pci/host-hv' into next
* pci/host-hv: PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs PCI: Look up IRQ domain by fwnode_handle PCI: Add fwnode_handle to x86 pci_sysdata |
||
|
|
c334f9c89e |
Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-tegra', 'pci/host-thunder', 'pci/host-vmd', 'pci/host-xilinx' and 'pci/host-xilinx-nwl' into next
* pci/host-altera:
PCI: altera: Fix altera_pcie_link_is_up()
* pci/host-imx6:
PCI: imx6: Add DT bindings to configure PHY Tx driver settings
* pci/host-keystone:
PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFER
* pci/host-rcar:
PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE
* pci/host-tegra:
PCI: tegra: Remove misleading PHYS_OFFSET
PCI: tegra: Track bus -> CPU mapping
PCI: tegra: Remove unused struct tegra_pcie.num_ports field
PCI: tegra: Implement ->{add,remove}_bus() callbacks
PCI: Add pci_ops.{add,remove}_bus() callbacks
* pci/host-thunder:
PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
PCI: thunder: Add PCIe host driver for ThunderX processors
PCI: generic: Expose pci_host_common_probe() for use by other drivers
PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
PCI: generic: Move structure definitions to separate header file
* pci/host-vmd:
x86/PCI: VMD: Attach VMD resources to parent domain's resource tree
x86/PCI: VMD: Set bus resource start to 0
x86/PCI: VMD: Document code for maintainability
* pci/host-xilinx:
microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver
PCI: xilinx: Update Zynq binding with Microblaze node
PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze
PCI: xilinx: Remove dependency on ARM-specific struct hw_pci
PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT
* pci/host-xilinx-nwl:
PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller
|
||
|
|
18e5e6913b |
Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', 'pci/virtualization' and 'pci/vpd' into next
* pci/aer:
PCI/AER: Log aer_inject error injections
PCI/AER: Log actual error causes in aer_inject
PCI/AER: Use dev_warn() in aer_inject
PCI/AER: Fix aer_inject error codes
* pci/enumeration:
PCI: Fix broken URL for Dell biosdevname
* pci/kconfig:
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Include pci/hotplug Kconfig directly from pci/Kconfig
PCI: Include pci/pcie/Kconfig directly from pci/Kconfig
* pci/misc:
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: Add QEMU top-level IDs for (sub)vendor & device
unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition
PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
PCI: Move pci_dma_* helpers to common code
frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration
* pci/virtualization:
PCI: Wait for up to 1000ms after FLR reset
PCI: Support SR-IOV on any function type
* pci/vpd:
PCI: Prevent VPD access for buggy devices
PCI: Sleep rather than busy-wait for VPD access completion
PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
PCI: Rename VPD symbols to remove unnecessary "pci22"
PCI: Remove struct pci_vpd_ops.release function pointer
PCI: Move pci_vpd_release() from header file to pci/access.c
PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code
PCI: Determine actual VPD size on first access
PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy
PCI: Allow access to VPD attributes with size 0
PCI: Update VPD definitions
|
||
|
|
7b77061f8d |
PCI: Add pcibios_bus_add_device() weak function
This adds weak function pcibios_bus_add_device() for arch dependent code could do proper setup. For example, powerpc could setup EEH related resources for SRIOV VFs. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|
|
c194f7ea7f |
PCI/IOV: Rename and export virtfn_{add, remove}
During EEH recovery, hotplug is applied to the devices which don't
have drivers or their drivers don't support EEH. However, the hotplug,
which was implemented based on PCI bus, can't be applied to VF directly.
Instead, we unplug and plug individual PCI devices (VFs).
This renames virtn_{add,remove}() and exports them so they can be used
in PCI hotplug during EEH recovery.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
||
|
|
057bd2e052 |
PCI: Add pci_ops.{add,remove}_bus() callbacks
Add pci_ops.{add,remove}_bus() callbacks, which will be called on every
newly created bus and when a bus is being removed, respectively. This can
be used by drivers to implement driver-specific initialization and teardown
of the bus, in addition to the architecture-specifics implemented by the
pcibios_add_bus() and the pcibios_remove_bus() functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
||
|
|
fe537670ea |
PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
Christoph added a generic include/linux/pci-dma-compat.h, so now there's
one place with most of the PCI DMA interfaces. Move more PCI DMA-related
things there:
- The PCI_DMA_* direction constants from linux/pci.h
- The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary()
CONFIG_PCI implementations from drivers/pci/pci.c
- The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary()
!CONFIG_PCI stubs from linux/pci.h
- The pci_set_dma_mask() and pci_set_consistent_dma_mask()
!CONFIG_PCI stubs from linux/pci.h
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
||
|
|
bc4b024a8b |
PCI: Move pci_dma_* helpers to common code
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
b84106b4e2 |
PCI: Disable IO/MEM decoding for devices with non-compliant BARs
The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Andi Kleen <ak@linux.intel.com> CC: stable@vger.kernel.org |
||
|
|
9eb45d5cc5 |
PCI: Update VPD definitions
The 'end' tag is actually 0x0f; it's the representation as a small resource data type tag that's 0x78 (i.e., shifted by 3). Correct PCI_VPD_STIN_END and PCI_VPD_SRDT_END accordingly. Also, add helper functions to extract the resource data type tags for both large and small resource data types. [bhelgaas: changelog] Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> |
||
|
|
67b4eab91c |
Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
Revert |
||
|
|
92016ba5c1 |
PCI: Add fwnode_handle to x86 pci_sysdata
Add an fwnode_handle to the x86 struct pci_sysdata, which will be used to locate an IRQ domain associated with a root PCI bus. [bhelgaas: changelog] Signed-off-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
5bbe029ff7 |
PCI: Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h
The PCI flag management constants and functions were previously declared in include/asm-generic/pci-bridge.h. But they are not specific to bridges, and arches did not include pci-bridge.h consistently. Move the following interfaces and related constants to include/linux/pci.h and remove pci-bridge.h: pci_set_flags() pci_add_flags() pci_clear_flags() pci_has_flag() This fixes these warnings when building for some arches: drivers/pci/host/pcie-designware.c:562:20: error: 'PCI_PROBE_ONLY' undeclared (first use in this function) drivers/pci/host/pcie-designware.c:562:7: error: implicit declaration of function 'pci_has_flag' [-Werror=implicit-function-declaration] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
d43421565b |
PCI changes for the v4.5 merge window:
Enumeration
Simplify config space size computation (Bjorn Helgaas)
Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
Support PCIe devices with short cfg_size (Jason S. McMullan)
Add Netronome vendor and device IDs (Jason S. McMullan)
Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
Add Netronome NFP4000 PF device ID (Simon Horman)
Limit config space size for Netronome NFP4000 (Simon Horman)
Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Resource management
Fix minimum allocation address overwrite (Christoph Biedl)
PCI device hotplug
acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
shpchp: Constify hpc_ops structure (Julia Lawall)
ibmphp: Remove unneeded NULL test (Julia Lawall)
Power management
Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
Virtualization
Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
MSI
Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
Initialize MSI capability for all architectures (Guilherme G. Piccoli)
Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
ARM Versatile host bridge driver
Remove unused pci_sys_data structures (Lorenzo Pieralisi)
Broadcom iProc host bridge driver
Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
Do not use 0x in front of %pap (Dmitry V. Krivenok)
Update iProc PCIe device tree binding (Ray Jui)
Add PAXC interface support (Ray Jui)
Add iProc PCIe MSI device tree binding (Ray Jui)
Add iProc PCIe MSI support (Ray Jui)
Freescale i.MX6 host bridge driver
Use gpio_set_value_cansleep() (Fabio Estevam)
Add support for active-low reset GPIO (Petr Štetiar)
HiSilicon host bridge driver
Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
Intel VMD host bridge driver
Export irq_domain_set_info() for module use (Keith Busch)
x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
Use 32 bit PCI domain numbers (Keith Busch)
Add driver for Intel Volume Management Device (VMD) (Keith Busch)
Qualcomm host bridge driver
Document PCIe devicetree bindings (Stanimir Varbanov)
Add Qualcomm PCIe controller driver (Stanimir Varbanov)
dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
Renesas R-Car host bridge driver
Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
Allow DT to override default window settings (Phil Edworthy)
Convert to DT resource parsing API (Phil Edworthy)
Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
Add runtime PM support to pcie-rcar (Phil Edworthy)
Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
Synopsys DesignWare host bridge driver
Simplify control flow (Bjorn Helgaas)
Make config accessor override checking symmetric (Bjorn Helgaas)
Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
Miscellaneous
Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
Fix all whitespace issues (Bogicevic Sasa)
x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
Use to_pci_dev() instead of open-coding it (Geliang Tang)
Use kobj_to_dev() instead of open-coding it (Geliang Tang)
Use list_for_each_entry() to simplify code (Geliang Tang)
Fix typos in <linux/msi.h> (Thomas Petazzoni)
x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z9mQ
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.5 merge window:
Enumeration:
- Simplify config space size computation (Bjorn Helgaas)
- Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
- Support PCIe devices with short cfg_size (Jason S. McMullan)
- Add Netronome vendor and device IDs (Jason S. McMullan)
- Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
- Add Netronome NFP4000 PF device ID (Simon Horman)
- Limit config space size for Netronome NFP4000 (Simon Horman)
- Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Resource management:
- Fix minimum allocation address overwrite (Christoph Biedl)
PCI device hotplug:
- acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
- pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
- shpchp: Constify hpc_ops structure (Julia Lawall)
- ibmphp: Remove unneeded NULL test (Julia Lawall)
Power management:
- Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
Virtualization
- Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
MSI:
- Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
- Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
- Initialize MSI capability for all architectures (Guilherme G. Piccoli)
- Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
ARM Versatile host bridge driver:
- Remove unused pci_sys_data structures (Lorenzo Pieralisi)
Broadcom iProc host bridge driver:
- Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
- Do not use 0x in front of %pap (Dmitry V. Krivenok)
- Update iProc PCIe device tree binding (Ray Jui)
- Add PAXC interface support (Ray Jui)
- Add iProc PCIe MSI device tree binding (Ray Jui)
- Add iProc PCIe MSI support (Ray Jui)
Freescale i.MX6 host bridge driver:
- Use gpio_set_value_cansleep() (Fabio Estevam)
- Add support for active-low reset GPIO (Petr Štetiar)
HiSilicon host bridge driver:
- Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
Intel VMD host bridge driver:
- Export irq_domain_set_info() for module use (Keith Busch)
- x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
- Use 32 bit PCI domain numbers (Keith Busch)
- Add driver for Intel Volume Management Device (VMD) (Keith Busch)
Qualcomm host bridge driver:
- Document PCIe devicetree bindings (Stanimir Varbanov)
- Add Qualcomm PCIe controller driver (Stanimir Varbanov)
- dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
- dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
Renesas R-Car host bridge driver:
- Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
- Allow DT to override default window settings (Phil Edworthy)
- Convert to DT resource parsing API (Phil Edworthy)
- Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
- Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
- Add runtime PM support to pcie-rcar (Phil Edworthy)
- Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
- Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
- Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
Synopsys DesignWare host bridge driver:
- Simplify control flow (Bjorn Helgaas)
- Make config accessor override checking symmetric (Bjorn Helgaas)
- Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
Miscellaneous:
- Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
- Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
- Fix all whitespace issues (Bogicevic Sasa)
- x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
- Use to_pci_dev() instead of open-coding it (Geliang Tang)
- Use kobj_to_dev() instead of open-coding it (Geliang Tang)
- Use list_for_each_entry() to simplify code (Geliang Tang)
- Fix typos in <linux/msi.h> (Thomas Petazzoni)
- x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"
* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
PCI: Limit config space size for Netronome NFP4000
PCI: Add Netronome NFP4000 PF device ID
x86/PCI: Add driver for Intel Volume Management Device (VMD)
PCI/AER: Use 32 bit PCI domain numbers
x86/PCI: Allow DMA ops specific to a PCI domain
irqdomain: Export irq_domain_set_info() for module use
PCI: host: Add of_pci_get_host_bridge_resources() stub
genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
PCI: rcar: Add Gen2 PHY setup to pcie-rcar
PCI: rcar: Add runtime PM support to pcie-rcar
PCI: designware: Make config accessor override checking symmetric
PCI: ibmphp: Remove unneeded NULL test
ARM: dts: ifc6410: enable PCIe DT node for this board
ARM: dts: apq8064: add PCIe devicetree node
PCI: hotplug: Use list_for_each_entry() to simplify code
PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
PCI: Avoid iterating through memory outside the resource window
PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
...
|
||
|
|
471036b2b8 |
acpi: pci: Setup MSI domain for ACPI based pci devices
This patch introduces pci_msi_register_fwnode_provider() for irqchip to register a callback, to provide a way to determine appropriate MSI domain for a pci device. It also introduces pci_host_bridge_acpi_msi_domain(), which returns the MSI domain of the specified PCI host bridge with DOMAIN_BUS_PCI_MSI bus token. Then, it is assigned to pci device. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> |
||
|
|
7c7a0e9453 |
ARM/PCI: Move align_resource function pointer to pci_host_bridge structure
Commit
|
||
|
|
e80e7edc55 |
PCI/MSI: Initialize MSI capability for all architectures
|
||
|
|
c56d4450eb |
PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum
The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or Unexpected Completion errors in some systems, which may cause device access timeouts. Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values for the Attribute as were supplied in the header of the corresponding Request, except as explicitly allowed when IDO is used." Instead of copying the Attributes from the Request to the Completion, the T5 always generates Completions with zero Attributes. The receiver of a Completion whose Attributes don't match the Request may accept it (which itself seems non-compliant based on sec 2.3.2), or it may handle it as a Malformed TLP or an Unexpected Completion, which will probably lead to a device access timeout. Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root Port so it always generate Requests with zero Attributes. This does affect all other devices which are downstream of that Root Port, but these are performance optimizations that should not make a functional difference. Note that Configuration Space accesses are never supposed to have TLP Attributes, so we're safe waiting till after any Configuration Space accesses to do the Root Port "fixup". Based on original work by Casey Leedom <leedom@chelsio.com> [bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework to use pci_upstream_bridge() and check for Root Port device type, edit diagnostics to clarify intent and devices affected] Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
b4eb6cdbbd |
PCI: Add builtin_pci_driver() to avoid registration boilerplate
In
|