The fan control mode can either be FDO_PWM_MODE_STATIC or FDO_PWM_MODE_STATIC_RPM.
Setting it as AMD_FAN_CTRL_AUTO will cause the fan spin faster wrongly.
This can be reproduced by:
'# cat /sys/class/hwmon/hwmon0/pwm1
38
'# cat /sys/class/hwmon/hwmon0/pwm1_enable
2
'# echo "2" > /sys/class/hwmon/hwmon0/pwm1_enable
'# cat /sys/class/hwmon/hwmon0/pwm1
122
The fan speed get faster wrongly even with its original mode echo back.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
otherwise PF & VF exchange is broken
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3
KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3
/utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v
/sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK
1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+
UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM=
=Mhx+
-----END PGP SIGNATURE-----
Backmerge tag 'v4.14-rc7' into drm-next
Linux 4.14-rc7
Requested by Ben Skeggs for nouveau to avoid major conflicts,
and things were getting a bit conflicty already, esp around amdgpu
reverts.
Fixes for Stable:
- Fix KBL Blank Screen (Jani)
- Fix FIFO Underrun on SNB (Maarten)
Other fixes:
- Fix GPU Hang on i915gm (Chris)
- Fix gem_tiled_pread_pwrite IGT case (Chris)
- Cancel modeset retry work during modeset clean-up (Manasi)
* tag 'drm-intel-fixes-2017-11-01' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Check incoming alignment for unfenced buffers (on i915gm)
drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)
drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects)
drm/i915/edp: read edp display control registers unconditionally
drm/i915: Do not rely on wm preservation for ILK watermarks
drm/i915: Cancel the modeset retry work during modeset cleanup
+ preemption support for a5xx[1][2]
+ display fixes for 8x96 (snapdragon 820) including fixes for 4k scanout
(hwpipe assignment re-work to handle multiple hwpipe assigned to plane
for wide scanout)
+ async cursor plane updates and fixes
+ refactor adreno_bind/hwinit.. still defer fw loading until device open,
but move clk/irq/etc to probe/bind time to fix issues when fw isn't
present in filesys
+ clk/dt bindings cleanups w/ backward compat via msm_clk_get() (dt docs
part ack'ed by Rob Herring)
+ fw loading re-work with helper to handle either /lib/firmware/qcom/$fw
or /lib/firmware/$fw.. background, we've started landing fw for some of
generations in linux-firmware, but there is a preference to put fw files
under 'qcom' subdirectory, which is not what was done on android or for
people who copied fw from android. So now we first look in qcom subdir
and then fallback to the original location.
+ bunch of GPU debugging enhancements, to dump full cmdline of processes
that trigger faults, and to add a new debugfs to capture cmdstream of
just submits that triggered faults.. both quite useful for piglit ;-)
* tag 'drm-msm-next-2017-11-01' of git://people.freedesktop.org/~robclark/linux: (38 commits)
drm/msm: use %z format modifier for printing size_t
drm/msm/mdp5: Don't use async plane update path if plane visibility changes
drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled
drm/msm/mdp5: Update mdp5_pipe_assign to spit out both planes
drm/msm/mdp5: Prepare mdp5_pipe_assign for some rework
drm/msm: remove mdp5_cursor_plane_funcs
drm/msm: update cursors asynchronously through atomic
drm/msm/atomic: switch to drm_atomic_helper_check
drm/msm/mdp5: restore cursor state when enabling crtc
drm/msm/mdp5: don't use autosuspend
drm/msm/mdp5: ignore planes that are not visible
drm/msm: dump submits which triggered gpu hang
drm/msm: preserve IOVAs in submit's bo table
drm/msm/rd: allow adding addition msg to top of dump
drm/msm: split rd debugfs file
drm/msm: add special _get_vaddr_active() for cmdstream dumps
drm/msm: show task cmdline in gpu recovery messages
drm/msm: dump a rd GPUADDR header for all buffers in the command
drm/msm: Removed unused struct_mutex_task
drm/msm: Implement preemption for A5XX targets
...
map_queues_cpsch uses the queue_count to decide whether to upload
a new runlist. So update the counter before calling it.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Process registration needs to happen on each device. So use per-device
queue lists to determine when to register/deregister the process.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Take the dbgmgr lock and unregister before destroying the debug manager.
Do this before destroying the queues.
v2: Correct locking order in kfd_ioctl_dbg_register to ake sure the
process mutex and dbgmgr mutex are always taken in the same order.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When kfd suspending on APU, we do not need to call
amd_iommu_unbind_pasid(), because pasid will be unbound automatically
when power goes off.
On the other hand, calling amd_iommu_unbind_pasid() will trigger
kfd_process_iommu_unbind_callback() if the process is not terminating.
By design, kfd_process_iommu_unbind_callback() should only be called
for process terminating. So we would rather not to call
amd_iommu_unbind_pasid() when suspending.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The MQD represents an inactive context and should not have ring or
doorbell enable bits set. Doing so interferes with HWS which streams
the MQD onto the HQD. If enable bits are set this activates the ring
or doorbell before the HQD is fully configured.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
A list of per-process queues is maintained in the
kfd_process_queue_manager, so the queues array in kfd_process is
redundant and in fact unused.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is an extension of Commit 7c20d213dd ("drm/vmwgfx: Work
around mode set failure in 2D VMs")
With Wayland desktop and atomic mode set, during the mode setting
process there is a moment when two framebuffer sized surfaces
are being pinned. This was not an issue with Xorg.
Since this only happens during a mode change, there should be no
performance impact by increasing allowable mem_size.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
vmw_fence_ops are not supposed to change at runtime. Functions
"dma_fence_init" working with const vmw_fence_ops provided
by <linux/dma-fence.h>. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
In case the object has changed tiling between calls to execbuf, we need
to check if the existing offset inside the GTT matches the new tiling
constraint. We even need to do this for "unfenced" tiled objects, where
the 3D commands use an implied fence and so the object still needs to
match the physical fence restrictions on alignment (only required for
gen2 and early gen3).
In commit 2889caa923 ("drm/i915: Eliminate lots of iterations over
the execobjects array"), the idea was to remove the second guessing and
only set the NEEDS_MAP flag when required. However, the entire check
for an unusable offset for fencing was removed and not just the
secondary check. I.e.
/* avoid costly ping-pong once a batch bo ended up non-mappable */
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP &&
!i915_vma_is_map_and_fenceable(vma))
return !only_mappable_for_reloc(entry->flags);
was entirely removed as the ping-pong between execbuf passes was fixed,
but its primary purpose in forcing unaligned unfenced access to be
rebound was forgotten.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031103607.17836-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 1d033beb20)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The return type of ARRAY_SIZE() is size_t, so we have to use
%zu instead of %lu to avoid this warning:
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_init':
drivers/gpu/drm/msm/msm_gpu.c:742:31: error: format '%lu' expects argument of type 'long unsigned int', but argument 7 has type 'unsigned int' [-Werror=format=]
The warning it otherwise harmless as size_t is always the
same size as unsigned long in all supported architectures,
but gcc doesn't know that.
Fixes: c2fceabca6d5 ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch fixes the following soft lockup:
BUG: soft lockup - CPU#0 stuck for 23s! [weston:307]
On weston idle-timeout the IP is powered down and reset
asserted. On weston resume we get a massive vblank
IRQ storm due to the LDI registers having lost some state.
This state loss is caused by ade_crtc_atomic_begin() not
calling ade_ldi_set_mode(). With this patch applied
resuming from Weston idle-timeout works well.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
single nouveau regression fix.
* 'linux-4.14' of git://github.com/skeggsb/linux:
drm/nouveau/kms/nv50: use the correct state for base channel notifier setup
The function for byteswapping the data send to/from atombios was buggy for
num_bytes not divisible by four. The function must be aware of the fact
that after byte-swapping the u32 units, valid bytes might end up after the
num_bytes boundary.
This patch was tested on kernel 3.12 and allowed us to sucesfully use
DisplayPort on and Radeon SI card. Namely it fixed the link training and
EDID readout.
The function is patched both in radeon and amd drivers, since the functions
and the fixes are identical.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
after individualize we need manually call reservation_object_fini()
if all fences on resv signaled during test, otherwise kmemory leak
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bo structure is freed up in case of an error, so we can't do any
accounting if that happens.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the mutex is locked just in the moment we copy it we end up with a
warning that we release a locked mutex.
Fix this by properly reinitializing the mutex.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To acquire all modeset locks requires a ww_ctx to be allocated. As this
is the legacy path and the allocation small, to reduce the changes
required (and complex untested error handling) to the legacy drivers, we
simply assume that the allocation succeeds. At present, it relies on the
too-small-to-fail rule, but syzbot found that by injecting a failure
here we would hit the WARN. Document that this allocation must succeed
with __GFP_NOFAIL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031115535.15166-1-chris@chris-wilson.co.uk
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [ffff8801359da0f0, ffff8801359da330)
The buggy address belongs to the page:
page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
(cherry picked from commit 547da76b57)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [ffff8801359da0f0, ffff8801359da330)
The buggy address belongs to the page:
page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 96d7763452 ("drm/i915: Use a radixtree for random access to the object's backing storage")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
(cherry picked from commit bea6e987c1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in
DP_EDP_CONFIGURATION_CAP should be set if the eDP display control
registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we
check the bit before reading the registers, and DP_EDP_DPCD_REV is the
only way to detect eDP revision.
Turns out there are (likely buggy) displays that require eDP 1.4+
features, such as supported link rates and link rate select, but do not
have the bit set. Read the display control registers
unconditionally. They are supposed to read zero anyway if they are not
supported, so there should be no harm in this.
This fixes the referenced bug by enabling the eDP version check, and
thus reading of the supported link rates. The panel in question has 0 in
DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the
supported link rates method we default to RBR which is insufficient for
the panel native mode. As a curiosity, the panel also has a bogus value
of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14
(which is 0x03).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400
Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com
(cherry picked from commit 0501a3b0eb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.
It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.8+
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 28283f4f35)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
To quote Felix: "For testing KV with current user mode stack, please use
amdgpu. I don't expect this to work with radeon and I'm not planning to
spend any effort on making radeon work with a current user mode stack."
Only compile tested, but should be straight forward.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When a plane moves out of bounds (i.e, outside the crtc clip region), the
plane state's "visible" parameter changes to false. When this happens, we
(a) release the hwpipe resources away from it, and
(b) unstage the corresponding hwpipe(s) from the Layer Mixers in the CRTC.
(a) requires use to acquire the global atomic state and assign a new
hwpipe. (b) requires us to re-configure the Layer Mixer, which is done in
the CRTC. We don't want to do these things in the async plane update path,
so return an error if the new state's "visible" isn't the same as the
current state's "visible".
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
MDP5 on newer SoCs support cursor planes (i.e, cursor SSPPs). They are a
separate entity unlike the cursors within LM.
Do not try to restore the MDP5 LM cursor registers, or the corresponding
CTL bits if we are not using LM cursors.
Also, since we've introduced a new variable 'lm_cursor_enabled', we can
now use it to avoid creating a different sets of crtc_funcs for CRTCs
with LM cursors and CRTCs with cursor planes.
Fixes: "drm/msm/mdp5: restore cursor state when enabling crtc"
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We currently call mdp5_pipe_assign() twice to assign the left and right
hwpipes for our drm_plane. When merging 2 hwpipes, there are a few
constraints that we need to keep in mind:
- Only the same types of SSPPs are preferred. I.e, a RGB pipe should
be paired with another RGB pipe, VIG with VIG etc.
- The hwpipe staged on the left should have a higher priority than
the hwpipe staged on the right. The priorities are as follows:
VIG0 > VIG1 > VIG2 > VIG3
RGB0 > RGB1 > RGB2 > RGB3
DMA0 > DMA1
We can't apply these constraints easily if mdp5_pipe_assign() is
called twice. Update mdp5_pipe_assign() to find both hwpipes in
one go, and add the extra constraints needed.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
mdp5_pipe_assign currently returns the hwpipe pointer for the drm_plane.
Return it indirectly by setting a pointer passed as an argument. This
is needed because we want the func to find out the right hwpipe too.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
After converting legacy cursor updates to atomic async commits
mdp5_cursor_plane_funcs just duplicates mdp5_plane_funcs now.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add support to async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
mdp5_update_cursor_plane_legacy() did but through atomic.
v5: call drm_atomic_helper_async_check() from the check hook
v4: add missing atomic async commit call to msm_atomic_commit(Archit Taneja)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Tested-by: Archit Taneja <architt@codeaurora.org> (v4)
[added comment about not hitting async update path if hwpipes are
re-assigned or global state is touched]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since we enabled runtime PM, we cannot count on cursor registers to
retain their values. This can result in situations where we think the
cursor is enabled when we enable the CRTC but it is trying to scan out
null (and the rest of cursor position/size is lost), resulting in faults
and generally angering the hw when coming out of DPMS with a cursor
enabled.
stable backport note: reverting 774e39ee35 is also a suitable fix
Fixes: 774e39ee35 drm/msm/mdp5: Set up runtime PM for MDSS
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
It's only likely to paper over bugs. Unlike the gpu, where we want to
keep things alive a bit longer in expectation of the next frame's
submit, when the display is shut down we can power off immediately.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Note we need to move update_fences() to after msm_rd_dump_submit(),
otherwise the bo's referenced by the submit may no longer be valid.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We need this if we want to dump the submit after cleanup (ie. from hang
or fault). But in the backoff/unpin case we want to clear them. So add
a flag so we can skip clearing the IOVAs in at cleanup.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Split into two instances, the existing $debugfs/rd which continues to
dump all submits, and $debugfs/hangrd which will be used to dump just
submits that cause gpu hangs (and eventually faults, but that will
require some iommu framework enhancements).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Prep work for adding a debugfs file that dumps just submits which
trigger hangs/faults. In this case the bo may already be in the
MADV_DONTNEED state, but will be still on the active list (since
the submit hasn't completed yet). So the normal check that the
bo is in the WILLNEED state does not apply. (But of course the bo
should definitely not be in the PURGED state!)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Now that freedreno gallium driver defaults to using submit_queue task
(render reordering), just showing task->comm is not so useful (ie. it is
always "flush_queue:0"), so also dump the cmdline. This should also be
more useful for piglit/shader_runner.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently the rd dump avoids any buffers marked as WRITE under
the assumption that the contents are not interesting. While it
is true that the contents are uninteresting we should still print
the iova and size for all buffers so that any listening replay
tools can correctly construct the submission.
Print the header for all buffers but only dump the contents for
buffers marked as READ.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Recent changes to locking have rendered struct_mutex_task
unused.
Unused since 0e08270a1f.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Implement preemption for A5XX targets - this allows multiple
ringbuffers for different priorities with automatic preemption
of a lower priority ringbuffer if a higher one is ready.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We use a global ringbuffer size and block size for all targets and
at least for 5XX preemption we need to know the value the RB_CNTL
in several locations so it makes sense to calculate it once and use
it everywhere.
The only monkey wrench is that we need to disable the RPTR shadow
for A430 targets but that only needs to be done once and doesn't
affect A5XX so we can or in the value at init time.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a shadow pointer to track the current command being written into
the ring. Don't commit it as 'cur' until the command is submitted.
Because 'cur' is used to construct the software copy of the wptr this
ensures that somebody peeking in on the ring doesn't assume that a
command is inflight while it is being written. This isn't a huge deal
with a single ring (though technically the hangcheck could assume
the system is prematurely busy when it isn't) but it will be rather
important for preemption where the decision to preempt is based
on a non-empty ringbuffer. Without a shadow an aggressive preemption
scheme could assume that the ringbuffer is non empty and switch to it
before the CPU is done writing the command and boom.
Even though preemption won't be supported for all targets because of
the way the code is organized it is simpler to make this generic for
all targets. The extra load for non-preemption targets should be
minimal.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In order to manage ringbuffer priority to its fullest userspace
should know how many ringbuffers it has to work with. Add a
parameter to return the number of active rings.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add the infrastructure to support the idea of multiple ringbuffers.
Assign each ringbuffer an id and use that as an index for the various
ring specific operations.
The biggest delta is to support legacy fences. Each fence gets its own
sequence number but the legacy functions expect to use a unique integer.
To handle this we return a unique identifier for each submission but
map it to a specific ring/sequence under the covers. Newer users use
a dma_fence pointer anyway so they don't care about the actual sequence
ID or ring.
The actual mechanics for multiple ringbuffers are very target specific
so this code just allows for the possibility but still only defines
one ringbuffer for each target family.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When we move to multiple ringbuffers we're going to store the data
in the memptrs on a per-ring basis. In order to prepare for that
move the current memptrs from the adreno namespace into msm_gpu.
This is way cleaner and immediately lets us kill off some sub
functions so there is much less cost later when we do move to
per-ring structs.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently the behavior of a command stream is provided by the user
application during submission and the application is expected to internally
maintain the settings for each 'context' or 'rendering queue' and specify
the correct ones.
This works okay for simple cases but as applications become more
complex we will want to set context specific flags and do various
permission checks to allow certain contexts to enable additional
privileges.
Add kernel-side submit queues to be analogous to 'contexts' or
'rendering queues' on the application side. Each file descriptor
instance will maintain its own list of queues. Queues cannot be
shared between file descriptors.
For backwards compatibility context id '0' is defined as a default
context specifying no priority and no special flags. This is
intended to be the usual configuration for 99% of applications so
that a garden variety application can function correctly without
creating a queue. Only those applications requiring the specific
benefit of different queues need create one.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We already have, as a result of upstreaming the gpu bindings,
msm_clk_get() which will try to get the clock both without and with a
"_clk" suffix. Use this in HDMI code so we can drop the "_clk" suffix
in bindings while maintaing backwards compatibility.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
We already have, as a result of upstreaming the gpu bindings,
msm_clk_get() which will try to get the clock both without and with a
"_clk" suffix. Use this in eDP code so we can drop the "_clk" suffix
in bindings while maintaing backwards compatibility.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
We already have, as a result of upstreaming the gpu bindings,
msm_clk_get() which will try to get the clock both without and with a
"_clk" suffix. Use this in DSI code so we can drop the "_clk" suffix
in bindings while maintaing backwards compatibility.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
When firmware was added to linux-firmware, it was put in a qcom sub-
directory, unlike what we'd been using before. For a300_pfp.fw and
a300_pm4.fw symlinks were created, but we'd prefer not to have to do
this in the future. So add support to look in both places when
loading firmware.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Previously, in an effort to defer initializing the gpu until firmware
was available (ie. rootfs mounted), the gpu was not loaded at when the
subdevice was bound. Which resulted that clks/etc were requested in a
place that devm couldn't really help unwind if something failed.
Instead move request_firmware() to gpu->hw_init() and construct the gpu
earlier in adreno_bind(). To avoid the rest of the driver needing to
be aware of a gpu that hasn't managed to load firmware and hw_init()
yet, stash the gpu ptr in the adreno device's drvdata, and don't set
priv->gpu() until hw_init() succeeds.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This was used as a placeholder. It was never really input to the MDSS/HDMI
clocks.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We need to call reservation_object_reserve_shared() in both cases, but
this wasn't happening in the _NO_IMPLICIT submit case.
Fixes: f0a42bb ("drm/msm: submit support for in-fences")
Reported-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In systems under heavy load the IH work may experience significant
scheduling delays.
Under load + system workqueue:
Max Latency: 7.023695 ms
Avg Latency: 0.263994 ms
Under load + high priority workqueue:
Max Latency: 1.162568 ms
Avg Latency: 0.163213 ms
Further work is required to measure the impact of per-cpu settings on IH
performance.
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We don't need to wait for all work to complete in the IH exit function.
We only need to make sure the interrupt_work has finished executing to
guarantee that ih_kfifo is no longer in use.
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
A larger buffer will let us accommodate applications with a large amount
of semi-simultaneous event signals.
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Replace our implementation of a lockless ring buffer with the standard
linux kernel kfifo.
We shouldn't maintain our own version of a standard data structure.
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This allows increasing the KFD_SIGNAL_EVENT_LIMIT in kfd_ioctl.h
without breaking processes built with older kfd_ioctl.h versions.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This speeds up signal lookup when the IH ring entry includes a
valid context ID or partial context ID. Only if the context ID is
found to be invalid, fall back to an exhaustive search of all
signaled events.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signal slots are identical to event IDs.
Replace the used_slot_bitmap and events hash table with an IDR to
allocate and lookup event IDs and signal slots more efficiently.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The first event page is always big enough to handle all events.
Handling of multiple events pages is not supported by user mode, and
not necessary.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use standard wait queues for waiting and waking up waiting threads
instead of inventing our own. We still have our own wait loop
because the HSA event semantics require the ability to have one
thread waiting on multiple wait queues (events) at the same time.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This always identical with the index of the event_waiter in the array.
No need to store it in the waiter record.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When an event with pending waiters is destroyed, those waiters may
end up sleeping forever unless they are notified and woken up.
Implement the notification by clearing the waiter->event pointer,
which becomes invalid anyway, when the event is freed, and waking
up the waiting tasks.
Waiters on an event that's destroyed return failure.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cleaned up the code while resolving some potential bugs and
inconsistencies in the process.
Clean-ups:
* Remove enum kfd_event_wait_result, which duplicates
KFD_IOC_EVENT_RESULT definitions
* alloc_event_waiters can be called without holding p->event_mutex
* Return an error code from copy_signaled_event_data instead of bool
* Clean up error handling code paths to minimize duplication in
kfd_wait_on_events
Fixes:
* Consistently return an error code from kfd_wait_on_events and set
wait_result to KFD_IOC_WAIT_RESULT_FAIL in all failure cases.
* Always call free_waiters while holding p->event_mutex
* copy_signaled_event_data might sleep. Don't call it while the task state
is TASK_INTERRUPTIBLE.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If kfd_wait_on_events can return immediately, we don't need to populate
the wait list and don't need to enter the sleep-loop.
Signed-off-by: Sean Keely <sean.keely@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The kfd_process doesn't own a reference to the mm_struct, so it can
disappear without warning even while the kfd_process still exists.
Therefore, avoid dereferencing the kfd_process.mm pointer and make
it opaque. Use get_task_mm to get a temporary reference to the mm
when it's needed.
v2: removed unnecessary WARN_ON
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ASIC temperature reading from HOTSPOT to ASIC edge which makes
things consistent with previous asics.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding affected planes without checking if modeset is requested from the user space causes performance regression in video p/b scenarios when full screen p/b is not composited.
Hence add a check before adding a plane as affected.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=103408
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The high part calculation of luma and chroma address' was
missing in dm_plane_helper_prepare_fb().
This fix brings uniformity in the address' at atomic_check
and atomic_commit for both RGB & YUV planes.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the high part of the address structure is not
populated in case of luma and chroma.
This patch adds this calculation.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate memory for the second pipe allocate_mem_input() needs to
be done prior to program pipe front end. It shows sensitive to
Fiji. Failure to do so will cause error in allocate memory
allocate_mem_input() on the second connected display.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4f346e655d.
fix s3 hang issue.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One fix for stable:
- fix perf enable/disable ioctls for 32bits (Lionel)
Plus GVT fixes:
- Fix per_ctx_bb check (Zhenyu)
- Fix GPU hang of Linux guest (Xion)
- Refine MMIO_RING_F to check for presence of VCS2 ring (Zhi)
* tag 'drm-intel-fixes-2017-10-26' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/gvt: Adding ACTHD mmio read handler
drm/i915/gvt: Extract mmio_read_from_hw() common function
drm/i915/gvt: Refine MMIO_RING_F()
drm/i915/gvt: properly check per_ctx bb valid state
When a workload is too heavy to finish it in gpu hang check timer
intervals(1.5), gpu hang check function will check ACTHD register
value to decide whether gpu is real dead or not. On real hw,
ACTHD is updated by HW when workload is running, then host kernel
won't think it is gpu hang. while guest kernel always read a constant
ACTHD value as GVT doesn't supply ACTHD emulate handler, then
guest kernel detects a fake gpu hang.
To remove such guest fake gpu hang, this patch supply ACTHD
mmio read handler which read real HW ACTHD register directly.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4c9a097-3e62-124e-6856-b0c37764df7b@intel.com
The mmio read handler for ring timestmap / instdone register are same
as reading hw value directly.
Extract it as common function to reduce code duplications.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Inspect if the host has VCS2 ring by host i915 macro in MMIO_RING_F().
Also this helps on reducing some LOCs.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Need to check valid state for per_ctx bb and bypass batch buffer
combine for scan if necessary. Otherwise adding invalid MI batch
buffer start cmd for per_ctx bb will cause scan failure, which is
taken as -EFAULT now so vGPU would be put in failsafe. This trys
to fix that by checking per_ctx bb valid state. Also remove old
invalid WARNING that indirect ctx bb shouldn't depend on valid
per_ctx bb.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Just a few fixes for 4.15.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/amdgpu: Remove workaround for suspend/resume in uvd7
drm/amdgpu: don't flush the TLB before initializing GART
drm/amdgpu: minor cleanup for amdgpu_ttm_bind
drm/amdgpu/psp: prevent page fault by checking write_frame address(v4)
drm/amd/powerplay: retrieve the real-time coreClock values
drm/amd/powerplay: fix performance drop on Vega10
drm/amd/powerplay: add one smc message for Vega10
drm/amd/powerplay: fix amd_powerplay_reset()
amdgpu: add padding to the fence to handle ioctl.
drm/amdgpu:fix wb_clear
drm/amdgpu:fix vf_error_put
drm/amdgpu/sriov:now must reinit psp
drm/amdgpu: merge bios post checking functions
The workaround is not required anymor and would result in
hangs during suspend/resume cycles if the uvd block were busy.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No point in doing this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Filter the placement mask before using it. In theory it could be that we
have other flags set here as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Prevent a possible buffer overflow when updating the ring buffer by
bounds checking the command frame against the available space in the
ring buffer.
v2: update the ring_buffer_end address
v3: update the commit log
v4: squash in print fix (Michel)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Currently, the coreClock value for min/max performance level on raven
is hard-coded. Use the real-time value retrieved by GetGfxMinFreqLimit
and GetGfxMaxFreqLimit PPSMC messages
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting package power PID to 1 fixes performance drop caused by
updated SMU FW, before DPM is enabled.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used to fix performance drop caused by updated SMU FW.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-intel-fixes-2017-10-25:
only 1 fix for stable:
- fix perf enable/disable ioctls for 32bits (lionel)
* tag 'drm-intel-fixes-2017-10-25' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/perf: fix perf enable/disable ioctls with 32bits userspace
The hdmi-codec interface added in this patch is required to properly
support HDMI audio. Currently the audio part of the SoC internal
HDMI transmitter is configured with fixed values, which makes HDMI
audio working by chance, only on boards having an external audio
codec connected in parallel with the HDMI audio transmitter's input
I2S interface.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Configuration details from Samsung. This enables 1366x768@60Hz,
which also needs the 256px timing hack to work around a mixer
limitation.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
[a.hajda@samsung.com: rebased onto proposed patchset]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since HDMI can handle these modes despite of MIXER limitations let's
enable them.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
MIXER in SoCs prior to Exynos5420 supports only 4 video modes:
720x480, 720x576, 1280x720, 1920x1080. Support for other modes
can be enabled by manipulating timings of HDMI. To do it
adjusted_mode should contain actual mode set on crtc.
With this patch it is possible to enable 1024x768 and 1280x1024
modes in MIXER.
Suggested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
MIXER in SoCs prior to Exynos5420 supports only 4 video modes:
720x480, 720x576, 1280x720, 1920x1080. Support for other modes can be
enabled by manipulating timings of HDMI. To allow it MIXER must pass
actual video mode to HDMI, the proper way to do it is to modify
adjusted_mode property in crtc::mode_fixup callback. Adding such callback
allows also to simplify mixer_cfg_scan code - choosing mode is performed
already in crtc::mode_fixup. mode_fixup is also better place to check
interlace flag.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
crtc::mode_fixup callback is required by crtcs which internally use
a different mode than requested by user - case of Exynos Mixer.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Display mode is preserved in CRTC state, there is no need to keep local
copy of it. Moreover since HDMI should configure registers according to
requested mode, use it instead of adjusted_mode, which should contain
mode produced by CRTC - functionally it does not change anything, but
subsequent patches will make the difference.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
mixer_resources adds only unnecessary redirection, removing it makes the
code shorter and cleaner.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Mode limitation checked in mixer driver affects only older HW.
Mixer in Exynos542x has no such limitations. While at it patch changes
validation callback to recently introduced mode_valid which is more
suitable for the check. Additionally little cleanup is performed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Screen resolution configuration depends on HW version, let's put it into
single function to make it consistent and simplify the code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Mode commit should not be called for every plane separately. It is enough
to call it once in enable callback. The change also requires that
the interlace check is moved to mixer_commit. It should be done in
the same patch to avoid regression.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Mode setup code is called from video plane update and mixer plane update.
Let's group it together in mixer_commit function like in case of other
Exynos CRTCs.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We accidentally inverted an if statement and turned amd_powerplay_reset()
into a no-op.
Fixes: ae97988fc8 ("drm/amd/powerplay: tidy up ret checks in amd_powerplay.c (v3)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The compat callback was missing and triggered failures in 32bits
userspace when enabling/disable the perf stream. We don't require any
particular processing here as these ioctls don't take any argument.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: eec688e142 ("drm/i915: Add i915 perf infrastructure")
Cc: linux-stable <stable@vger.kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024152728.4873-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 191f896085)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On APUs the uvd6 driver was skipping proper suspend/resume routines resulting
in a broken state upon resume.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
drm_mode_create_lease
Creates a lease for a list of drm mode objects, returning an
fd for the new drm_master and a 64-bit identifier for the lessee
drm_mode_list_lesees
List the identifiers of the lessees for a master file
drm_mode_get_lease
List the leased objects for a master file
drm_mode_revoke_lease
Erase the set of objects managed by a lease.
This should suffice to at least create and query leases.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* query ioctls only query the master associated with
the provided file.
* 'mask_lease' value has been removed
* change ioctl has been removed.
Changes for v3 suggested in part by Dave Airlie <airlied@gmail.com>
* Add revoke ioctl.
Changes for v4 suggested by Dave Airlie <airlied@gmail.com>
* Expand on the comment about the magic use of &drm_lease_idr_object
* Pad lease ioctl structures to align on 64-bit boundaries
Changes for v5 suggested by Dave Airlie <airlied@gmail.com>
* Check for non-negative object_id in create_lease to avoid debug
output from the kernel.
Changes for v6 provided by Dave Airlie <airlied@gmail.com>
* For non-universal planes add primary/cursor planes to lease
If we aren't exposing universal planes to this userspace client,
and it requests a lease on a crtc, we should implicitly export the
primary and cursor planes for the crtc.
If the lessee doesn't request universal planes, it will just see
the crtc, but if it does request them it will then see the plane
objects as well.
This also moves the object look ups earlier as a side effect, so
we'd exit the ioctl quicker for non-existant objects.
* Restrict leases to crtc/connector/planes.
This only allows leasing for objects we wish to allow.
Changes for v7 provided by Dave Airlie <airlied@gmail.com>
* Check pad args are 0
* Check create flags and object count are valid.
* Check return from fd allocation
* Refactor lease idr setup and add some simple validation
* Use idr_mutex uniformly (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Attempts to modify un-leased objects are rejected with an error.
Information returned about unleased objects is modified to make them
appear unusable and/or disconnected.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* With the change in the __drm_mode_object_find API to pass the
file_priv along, we can now centralize most of the lease-based
access checks in that function.
* A few places skip that API and require in-line checks.
Changes for v3 provided by Dave Airlie <airlied@redhat.com>
* remove support for leasing encoders.
* add support for leasing planes.
Changes for v4
* Only call drm_lease_held if DRIVER_MODESET.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This provides new data structures to hold "lease" information about
drm mode setting objects, and provides for creating new drm_masters
which have access to a subset of the available drm resources.
An 'owner' is a drm_master which is not leasing the objects from
another drm_master, and hence 'owns' them.
A 'lessee' is a drm_master which is leasing objects from some other
drm_master. Each lessee holds the set of objects which it is leasing
from the lessor.
A 'lessor' is a drm_master which is leasing objects to another
drm_master. This is the same as the owner in the current code.
The set of objects any drm_master 'controls' is limited to the set of
objects it leases (for lessees) or all objects (for owners).
Objects not controlled by a drm_master cannot be modified through the
various state manipulating ioctls, and any state reported back to user
space will be edited to make them appear idle and/or unusable. For
instance, connectors always report 'disconnected', while encoders
report no possible crtcs or clones.
The full list of lessees leasing objects from an owner (either
directly, or indirectly through another lessee), can be searched from
an idr in the drm_master of the owner.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* Sub-leasing has been disabled.
* BUG_ON for lock checking replaced with lockdep_assert_held
* 'change' ioctl has been removed.
* Leased objects can always be controlled by the lessor; the
'mask_lease' flag has been removed
* Checking for leased status has been simplified, replacing
the drm_lease_check function with drm_lease_held.
Changes in v3, some suggested by Dave Airlie <airlied@gmail.com>
* Add revocation. This allows leases to be effectively revoked by
removing all of the objects they have access to. The lease itself
hangs around as it's hanging off a file.
* Free the leases IDR when the master is destroyed
* _drm_lease_held should look at lessees, not lessor
* Allow non-master files to check for lease status
Changes in v4, suggested by Dave Airlie <airlied@gmail.com>
* Formatting and whitespace changes
Changes in v5 (airlied)
* check DRIVER_MODESET before lease destroy call
* check DRIVER_MODESET for lease revoke (Chris)
* Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
Final drm-misc feature pull for 4.15:
UAPI Changes:
- new madvise ioctl for vc4 (Boris)
Core Changes:
- plane commit tracking fixes (Maarten)
- vgaarb improvements for fancy new platforms (aka ppc64 and arm64) by
Bjorn Helgaas
Driver Changes:
- pile of new panel drivers: Toshiba LT089AC19000, Innolux AT043TN24
- more sun4i work to support A10/A20 Tcon and hdmi outputs
- vc4: fix sleep in irq handler by making it threaded (Eric)
- udl probe/edid read fixes (Robert Tarasov)
And a bunch of misc small cleanups/refactors and doc fixes all over.
* tag 'drm-misc-next-2017-10-20' of git://anongit.freedesktop.org/drm/drm-misc: (32 commits)
drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.
drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl
drm/panel: simple: add Toshiba LT089AC19000
dma-fence: remove duplicate word in comment
drm/panel: simple: add delays for Innolux AT043TN24
drm/panel: simple: add bus flags for Innolux AT043TN24
drm/panel: simple: fix vertical timings for Innolux AT043TN24
drm/atomic-helper: check that drivers call drm_crtc_vblank_off
drm: some KMS todo ideas
vgaarb: Factor out EFI and fallback default device selection
vgaarb: Select a default VGA device even if there's no legacy VGA
drm/bridge: adv7511: Fix a use after free
drm/sun4i: Add support for A20 display pipeline components
drm/sun4i: Add support for A10 display pipeline components
drm/sun4i: hdmi: Support HDMI controller on A10
drm/sun4i: tcon: Add support for A10 TCON
drm/sun4i: backend: Support output muxing
drm/sun4i: tcon: Move out the tcon0 common setup
drm/sun4i: tcon: Don't rely on encoders to set the TCON mode
drm/sun4i: tcon: Don't rely on encoders to enable the TCON
...
This contains a bit of cleanup and some minor fixes for the host1x and
Tegra DRM drivers. There's also some more preparatory work for Tegra186
support which I'm not quite ready to send upstream because the GPIO
driver needed for HDMI support has been stuck for months, and we can't
do much without it. Hopefully that driver will land in v4.15, which
would mean we could go ahead with Tegra186 display support in v4.16.
-----BEGIN PGP SIGNATURE-----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=nsc7
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.15-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.15-rc1
This contains a bit of cleanup and some minor fixes for the host1x and
Tegra DRM drivers. There's also some more preparatory work for Tegra186
support which I'm not quite ready to send upstream because the GPIO
driver needed for HDMI support has been stuck for months, and we can't
do much without it. Hopefully that driver will land in v4.15, which
would mean we could go ahead with Tegra186 display support in v4.16.
* tag 'drm/tegra/for-4.15-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: hdmi: Add cec-notifier support
drm/tegra: dc: Perform a complete reset sequence
drm/tegra: dc: Make sure to set the module clock rate
drm/tegra: dc: Simplify atomic plane helper functions
drm/tegra: dc: Move some declarations to dc.h
drm/tegra: vic: Use of_device_get_match_data()
drm/tegra: sor: Use of_device_get_match_data()
drm/tegra: hdmi: Use of_device_get_match_data()
drm/tegra: dc: Use of_device_get_match_data()
drm/tegra: Use u64_to_user_ptr helper
gpu: host1x: Fix incorrect comment for channel_request
gpu: host1x: Disassemble more instructions
gpu: host1x: Improve debug disassembly formatting
gpu: host1x: Enable gather filter
gpu: host1x: Enable Tegra186 syncpoint protection
gpu: host1x: Call of_dma_configure() after setting bus
drm/tegra: Add Tegra186 support for VIC
gpu: host1x: Add Tegra186 support
dt-bindings: host1x: Add Tegra186 information
gpu: host1x: syncpt: Request syncpoints per client
...
This patch changes the way the primary surface is used for dumb
framebuffers. Instead of configuring the bo itself as primary surface
a shadow bo is created and used instead. Framebuffers can share the
shadow bo in case they have the same format and resolution.
On atomic plane updates we don't have to update the primary surface in
case we pageflip from one framebuffer to another framebuffer which
shares the same shadow. This in turn avoids the flicker caused by the
primary-destroy + primary-create cycle, which is very annonying when
running wayland on qxl.
The qxl driver never actually writes to the shadow bo. It sends qxl
blit commands which update it though, and the spice server might
actually execute them (and thereby write to the shadow) in case the
local rendering is kicked for some reason. This happens for example in
case qemu is asked to write out a dump of the guest display (screendump
monitor command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171019062150.28090-3-kraxel@redhat.com
These provide crtc-id based functions instead of pipe-number, while
also offering higher resolution time (ns) and wider frame count (64)
as required by the Vulkan API.
v2:
* Check for DRIVER_MODESET in new crtc-based vblank ioctls
Failing to check this will oops the driver.
* Ensure vblank interupt is running in crtc_get_sequence ioctl
The sequence and timing values are not correct while the
interrupt is off, so make sure it's running before asking for
them.
* Short-circuit get_sequence if the counter is enabled and accurate
Steal the idea from the code in wait_vblank to avoid the
expense of drm_vblank_get/put
* Return active state of crtc in crtc_get_sequence ioctl
Might be useful for applications that aren't in charge of
modesetting?
* Use drm_crtc_vblank_get/put in new crtc-based vblank sequence ioctls
Daniel Vetter prefers these over the old drm_vblank_put/get
APIs.
* Return s64 ns instead of u64 in new sequence event
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
v3:
* Removed FIRST_PIXEL_OUT_FLAG
* Document that the timestamp in the query and event are
that of the first pixel leaving the display engine for
the display (using the same wording as the Vulkan spec).
Suggested-by: Michel Dänzer <michel@daenzer.net>
Acked-by: Dave Airlie <airlied@redhat.com>
[airlied: left->leaves (Michel)]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The feature implementation isn't stable yet. Reject any attempt to use
the IOCTLs for now. This keeps most of the code in place, so we can stabilize
it in-tree, but keeps userspace from using the feature for now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The performance monitoring feature isn't stable enough yet, so don't advertise
it to userspace yet.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Programming sequence to frontend and backend has been switched.
In such case, program_scaler() is getting called when programming
frontend, and should be removed from backend programming routine.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not create dc_state within display_resume, since it's being
constructed within atomic check.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SoC's having software designed cursor plane,
should be treated differently than hardware cursor planes.
The DRM core initializes cursor plane by default with
legacy_cursor_update set.
Hence legacy_cursor_update can be use effectively
to handle software cursor planes' update and atomicity
functionalities.
This patch uses this variable to decide in the atomic_check
to whether add a requested plane to the list of affected planes or
not, hence fixing the issue of co-existence of MPO, i.e,
setting of available hardware planes like underlay and
updation of cursor planes as well.
Without this patch when underlay is set from user space,
only blank screen with backlight is visible.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cast of dc_link is redundant.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move WARN_ON higher up and in doing so fix brace style.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace inlined strncpy with library call.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a local reference to the dc_link that wasn't being
used so we shorten references throughout the function.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Andrey Grodzovsky <andey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
turns out to be a win to inline this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is unused code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reduces the code size.
This is basically a redo of Dave's change with the same name
on top of the latest DML.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Having one struct on the stack was somewhat confusing. Also mention
that the whole function should eventually go.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1080p idle, stutter efficiency goes up from 95.8% to 97.8%
result in 5mW saving from APU and 8mW saving from DDR4
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by 0-day
https://lists.freedesktop.org/archives/dri-devel/2017-October/154698.html
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- regression fixes in dal 3.1.06
- more linux upstream backport
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function likes to blow 1024 stack size when something is
added to the addr struct. For now just dynamically allocate.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One more thing that happened due to uneven applying of patches. This
mirrors what Darren Salt fixed.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of this stuff is not really dm_services
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Three monitor connected and playing a video will
occupy all 4 pipes, if hot plug forth display,
commit streams will be failed due to no free pipe
can be found.
Work around:
When forth monitor connected, mark video plane as
a fake plane, remove it in dc, keep it in dm and
report address to OS, until OS turn off MPO.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One of the HDMI ports map to DIGD, which we did not map to DP3 ext
HDMI settings. Add the DIGD case so that we can get proper retimer
settings from SBIOS for that port.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There were cases where the chip caps held additional bits that led to
the retimer/redriver check failing; use the proper mask to ensure that
we have only the bits that we care about for the check in question.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous patch set the addressable timing as active + border,
when in fact, the VESA standard specifies active as equal to
addressable + border.
This patch makes the fix more correct and in line with the standard.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code isn't used at all in the kernel tree, perhaps it can wait to
be imported when it is. It also does a lot of floating point calcs,
so probably good to drop it until it's needed and we can ensure
proper fpu accessors.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use combo of tabs and spaces
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This actually happens quite a bit, and having it as an error causes
false positive messages when running tests.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/gpio_service.c:134:3-8: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/gpio_service.c:175:4-9: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes: f09cd1f46388 ("drm/amd/display: Use kernel alloc/free")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: convert value to bool using !!
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acquire_first_split_pipe only makes sense for DCN.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_create_state() returns NULL on allocation failure. Raise warning when
that happens.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When scaling is enabled, our preference is to scale up to the prefered
(native) mode. This means that hardware timings will be the same across
a modeset.
Therefore, also report mode as changed if source or destination
rectangle is different.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This ensures that we do not draw the blank region onscreen, and that we
do underscan instead.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid confusion, need to suppress the error message when get
-ERESTARTSYS error code. It is normal when getting interrupted
by signals in the process of a wait for the buffer to become
unreserved. Only propagate to user-mode for further action,
no need to pop up error message.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Which removes a lockdep warning for a possible deadlock situation:
While holding the drm event mutex (hard irq safe),
dc_post_update_surfaces_to_stream eventually acquires the atom context
lock, which is hard irq unsafe. We should only be calling it on full
updates anyways.
Also remove a redundant call to dc_post_update_surfaces_to_stream,
dc_commit_updates_for_stream already calls it.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Regression caused by: Ib98354194d7
Need to check crtc->stream before updating cursor attributes
and position.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When surface bigger then 10 bpc the output pixel
does not match to the required value.Update CRC's.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set hardcode_coeff only when BOTH chroma and luma taps are
more than 1
without this underscan with h or v set to 0 darkens
the screen (either h or v set to 0, not both)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix underscan not being set correctly
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our plane_states array trimming logic was faulty, we should be starting
to shuffle from the plane that was just released, not from the very
beginning of the array.
Also get rid of a leftover line that was setting the plane state at the
stream index to null, leading to issues. Also move the
dc_plane_state_retain call to where we reference plane_state, in case we
do hit the error case where we can't get a free pipe.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were spamming the debugger logs.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of our HW calcs functions compares a var against
itself to check for NaN. Gcc isn't fond of it and wrongfully
warns about a tautological comparison. Disable this check
for dcn_calcs_math.c.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When validate with context fail to add stream to the context, we have
a case where set_dpms won't be able to find the stream that need to
be disabled.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Half screen gamma setting and cursor are incorrect
when switching mode through win+p due to wrong programming
gamma sequence (In case of bottom pipe, gamma and cursor are
programmed before front end programmed, pipe is power gated).
change:
1. Cache curor attributes to stream
2. Move set gamma and cursor inside front end
programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- avoid eDP screen flash 4 times when resume from s3
- improve s3 and boot time
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For linux it takes longer than 40us so increasing it to
200us. Also added debug prints regarding the change
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were overwriting the whole register which was re-enabling
stutter for raven. Now we are reading the register then setting
the values only for pstate.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Fixed acquire free split pipe bug.
2. Change return value for dc_add_stream_to_ctx
from bool to enum.
4. Remove redundant apply_ctx_for_surface calling
5. Unlock pipe after back end programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Locks are no longer needed since the drm framework takes care of
correct locking.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Original code is no longer needed and tested without loop.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing loop boundaries in irq enable/disable on resume.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
this change is in branch already.
without this change, after resume, az_inst might swapped.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently FBC is guarded with ENABLE_FBC macro,
which needs to be manually enabled in Makefile.
This patch moves it to Kconfig so that there
wont be any need to additional patch to be carried
for enabling or disabling on every SoC.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On S3 resume the HPD6 irq source was not reenabled
due to loop boundary bug.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo in register field. we are lucky the shift/mask is the same, no behavior change
add globals to experiment with using different VM settings
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d1209512e0.
Unfortunately these clash with our DML update from the HW guys.
Rerolling this after the fact won't save us anything anymore,
unfortunately so we're back to non-inline for this.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b3fbdcec5e.
Unfortunately these clash with our DML update from the HW guys
as it's starting to get used now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3e8c3108da.
Unfortunately these clash with our DML update from the HW guys.
Will attempt to reroll them after.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e5bcf3d83e.
Unfortunately these clash with our DML update from the HW guys.
Will attempt to reroll them after.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5e0adbff08.
Unfortunately these clash with our DML update from the HW guys.
Will attempt to reroll them after.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d8c893b44b.
Unfortunately these clash with our DML update from the HW guys.
Will attempt to reroll them after.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For verification of watermark select with SMU team, proper
implementation will follow
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There are many occasions we need to retrieve sink capability and
notify connectivity change to os even if edid is not changed
on a HPD toggle.
(HDMI2.0 display needs re-enable link on every hpd,
display changes other capability outside from edid
need to be queried again and possibly reset the mode, etc.)
In these cases we cannot keep the same sink without letting DM know.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in past program SMU will use all voltage headroom. RV does not
if DAL need higher voltage for DCFCLK or DISPCLK, also increase FCLK
to improve stutter as voltage is already
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent commit moved the backlight control code along with the register
defines, but did not move the power control code. This along with
remnant fields in the dce110_link_enc_registers struct made it so that
the code still compiled, but any attempts to access the
LVTMA_PWRSEQ_STATE register led to reading from an address of 0. This
patch corrects that.
Also, rename blacklight_control to edp_backlight_control (Typo fix).
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the full update type, need to add ref_count to the newly
created dc_state->stream. It made mistake to add ref_count to
dc->current_state->stream which keeps adding up without release.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should only lower dpp clock.
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
experimental change for testing if max line buffer result in better stutter efficiency
for 1080p, LB can hold up to 9 line at 10bpcc, potentially add 10 line time of
latency hiding.
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. reverts commit e67f51012740 ("dc: temp disable DCC on high res.")
- default still DCC enabled
2. add debug options to decide how DCC is disabled
- disable DCC
- disable DCC if DCC requires 128b (aka. half) request
-- observed compressed data corruption result in screen corruption in
full (256b) request while half (128b) would cause DCN to hang, result in
DF hang
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
also refactor debug option. now pipe_split_policy are
dynamic = no hack around dcn_calcs. will split based on HW recommendation
avoid = avoid split if we can support the config with higher voltage
avoid_multi_display = allow split with single display output.
force_single_disp_pipe_split
force single display to pipe split to improve stutter efficiency
by using DET buffers using 2 HUBP.
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SST daisy chain scenario, edid is getting read in mst hotplug
routine. It is getting conflict with drm send_enum_path_resources
kernel thread in terms of i2c bus which is getting locked up in
such case.
Have edid being read in get_mode hook, instead of in hotplug
routine.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of two monitor connected and turn off one of the monitors,
OTG0 is locked after graphic plane off due to redundant programming
front end regs.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
link type is not updated before mst topology discovery.
This causes issue when branch device response to link address after before
the start topology discovery event finishes.
[Solution]
update link type to mst before topology discovery
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When doing SLS, KMD gives us clipped v_addressable with
border. This results in bw validation failure.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous changed removed the hack to match mpcc_idd
with mi instance. This causes pstate hang on resume
from hibernate for yet unknown reason. Add the hack
back for now to work around the issue. More debugging
required in init_hw to root cause the hang.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
hbr2 compliance eye output is unstable
(toggling on and off) with debugger break.
This caueses intermittent PHY automation failure.
Need to look into the root cause later
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split update_planes_and_stream_state (split Software and Hardware
programming) as the state is already build, so we only need to
program the hardware
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevent NULL pointer on new_stream being added to ctx
when added MST connectors cannot be found in existing crtc_state
in the chained mode
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs effort to take care of the fake sink scenario
in downstream daisy chain device. Exclude MST from
fake sink feature for now.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During system suspend, we:
1. Cache a duplicate of the current DRM atomic state, which calls hooks
to duplicate our internal states.
2. Call hooks to disable all functionalities.
3. System suspended.
During resume, we attempt to restore the cached state. However, our
interal states are now stale, since step 1 was done before step 2.
i.e. our cached state does not reflect the disabled nature of things.
This change resolves that by destroying all relevant states to reflect
the actual state during resume.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- fixed wrong index in dce110_validate_surface_sets()
- formatted for better readability
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
igned-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed in the previous fake sink change. The fake sink
allows us to enable a pipe with a disconnected display. We
shouldn't report it as connected.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fixing text mode for cases when VT-switch doesn't result
in timing change
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous change moved link_disconnect_sink after dpcd read,
this causes the sink count to be overwritten which in turn causes
another detection to be triggered in the short pulse handler, which
brings down the display.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to not always have scaling on, which causes issues with
validation and causes the text to blur slightly.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting on CNL we now need to map VBT DDC Pin to
BSPec DDC Pin values. Not a direct translation anymore.
According to VBT
Block 2 (General Bytes Definition)
DDC Bus
+----------+-----------+--------------------+
| DDI Type | VBT Value | Bspec Mapped Value |
+----------+-----------+--------------------+
| DDI-B | 0x1 | 0x1 |
| DDI-C | 0x2 | 0x2 |
| DDI-D | 0x3 | 0x4 |
| DDI-F | 0x4 | 0x3 |
+----------+-----------+--------------------+
v2: Move defines to a better place.
This is actually CNL_PCH not CNL only.
v3: Accepting Ville's suggestions: enums and array to
to make this future proof.
v4: Protect the array access as Ville suggested.
Also accepting all Jani's suggestions:
- use already defined gmbus pin definitions.
- use map_ddc_pin for disambiguation.
- Add /* sic */ comment on inverted values
so people can easily see it it nos a mistake
we have the map 3 -> 4 and 4 -> 3 :/
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020172641.16029-1-rodrigo.vivi@intel.com
No functional change expected. Just let's use this enum
when possible and also same standard pll_id name
so we can rework gen9+ port clock later.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018195407.8618-1-rodrigo.vivi@intel.com
Place drm_event_vblank in a new union that includes that and a bare
drm_event structure. This will allow new members of that union to be
added in the future without changing code related to the existing vbl
event type.
Assignments to the crtc_id field are now done when the event is
allocated, rather than when delievered. This way, delivery doesn't
need to have the crtc ID available.
v2:
* Remove 'dev' argument from create_vblank_event
It wasn't being used anyways, and if we need it in the future,
we can always get it from crtc->dev.
* Check for MODESETTING before looking for crtc in queue_vblank_event
UMS drivers will oops if we try to get a crtc, so make sure
we're modesetting before we try to find a crtc_id to fill into
the event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit dc695b85fde88eca3ef3b03fcd82f15b6bc6e462)
This modifies the datatypes used by the vblank code to provide 64 bits
of vblank count.
The driver interfaces have been left using 32 bits of vblank count;
all of the code necessary to widen that value for the user API was
already included to handle devices returning fewer than 32-bits.
This will provide the necessary datatypes for the Vulkan API.
v2:
* Re-write wait_vblank ioctl to ABSOLUTE sequence
When an application uses the WAIT_VBLANK ioctl with RELATIVE
or NEXTONMISS bits set, the target vblank interval is updated
within the kernel. We need to write that target back to the
ioctl buffer and update the flags bits so that if the wait is
interrupted by a signal, when it is re-started, it will target
precisely the same vblank count as before.
* Leave driver API with 32-bit vblank count
v3:
* Rebase on top of Arnd Bergmann's patch which had
the switch to ktime_t parts.
[airlied: fix conflict with Ville vblank change].
Suggested-by: Michel Dänzer <michel@daenzer.net>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 2affbc16983e4fc90960bc7f70e7615f4228199b)
Properly shift the index when clearing so we clear
the right bit
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,it should not work on non-SR-IOV case
2,the NO_VBIOS error is incorrect, should
handle it under detect_sriov_bios.
3,wrap the whole detect_sriov_bios with sriov check
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
otherwise after VF FLR the KIQ cannot work
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge the post checking functions to avoid confusion and take
virtualization into account in all cases.
Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to support CEC the HDMI driver has to inform the CEC driver
whenever the physical address changes. So when the EDID is read the
CEC driver has to be informed and whenever the hotplug detect goes
away.
This is done through the cec-notifier framework.
The link between the HDMI driver and the CEC driver is done through
the hdmi-phandle property in the tegra-cec node in the device tree.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order for the reset to be applied properly, the module clock must be
enabled during the assertion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When applying the PLL changes from the computed state object, make sure
to set the rate of the display controller module clock. Failing to do so
can yield to a situation where the parent will be set to the proper
pixel clock, but the module clock will be divided down to the rate that
is happened to be set to before the parent rate change.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove the tegra_dc_disable_window() function whose only purpose was to
allow tegra_plane_atomic_update() to also call it. Fix that by shuffling
tegra_plano_atomic_disable() to before tegra_plane_atomic_update().
While at it, also remove the overlay plane helper functions because they
are exactly the same as the primary plane helper functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the u64_to_user_ptr helper macro to cast IOCTL argument u64 values
to user pointers instead of writing out the cast manually. Also do
some other cleanup with user pointers to make them stand out more
and look cleaner.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function actually doesn't sleep in the version that was merged.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The disassembler for debug dumps was missing some newer host1x opcodes.
Add disassembly support for these.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host1x driver prints out "disassembly" dumps of the command FIFO
and gather contents on submission timeouts. However, the output has
been quite difficult to read with unnecessary newlines and occasional
missing parentheses.
Fix these problems by using pr_cont to remove unnecessary newlines
and by fixing other small issues.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The gather filter is a feature present on Tegra124 and newer where the
hardware prevents GATHERed command buffers from executing commands
normally reserved for the CDMA pushbuffer which is maintained by the
kernel driver.
This commit enables the gather filter on all supporting hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since Tegra186 the Host1x hardware allows syncpoints to be assigned to
specific channels, preventing any other channels from incrementing
them.
Enable this feature where available and assign syncpoints to channels
when submitting a job. Syncpoints are currently never unassigned from
channels since that would require extra work and is unnecessary with
the current channel allocation model.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
of_dma_configure() now checks the device's bus before configuring it, so
we need to set the device's bus before calling.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Tegra186 support for VIC - no changes are required except for new
firmware and compatibility string.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for the implementation of Host1x present on the Tegra186.
The register space has been shuffled around a little bit, requiring
addition of some chip-specific code sections. Tegra186 also adds
several new features, most importantly the hypervisor, but those are
not yet supported with this commit.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than request syncpoints for a struct device *, request them for a
struct host1x_client *. This is important because subsequent patches are
going to break the assumption that host1x will always be the parent for
devices requesting a syncpoint. It's also a more natural choice because
host1x clients are really the only ones that will know how to deal with
syncpoints.
Note that host1x clients are always guaranteed to be children of host1x,
regardless of their location in the device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.
While at it, shuffle around some code to avoid unnecessary local
variables.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch re-use already parsed DSI backlight/cabc ports
info for saving it inside struct intel_dsi rather than
parsing it at the time of DSI initialization.
V2: Remove backlight and cabc variable initialization (Jani N).
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-2-git-send-email-madhav.chauhan@intel.com
This patch parse DSI backlight/cabc ports info from
VBT and save them inside local structure. This saved info
can be directly used while initializing DSI for different
platforms instead of parsing for each platform.
V2: Changes:
- Typo fix in commit message.
- Move up newly added port variables (Jani N)
- Remove redundant initialization (Jani N)
- Don't parse CABC ports if not supported (Jani N)
V3: Patch restructure (Suggested by Jani N)
Credits-to: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-1-git-send-email-madhav.chauhan@intel.com
This is the amdkfd pull request for 4.15 merge window.
The patches here are relevant only for Kaveri and Carrizo. Still no dGPU patches.
The main goal is to continue alignment with the internal AMD development tree.
The following is a summary of the changes:
- Improvements and fixes to suspend/resume code
- Improvements and fixes to process termination code
- Cleanups in the queue unmapping functionality
- Reuse code from amdgpu
* tag 'drm-amdkfd-next-2017-10-18' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Improve multiple SDMA queues support per process
drm/amdkfd: Limit queue number per process and device to 127
drm/amdkfd: Clean up process queue management
drm/amdkfd: Compress unnecessary function parameters
drm/amdkfd: Improve process termination handling
drm/amdkfd: Avoid submitting an unnecessary packet to HWS
drm/amdkfd: Fix MQD updates
drm/amdkfd: Pass filter params to unmap_queues_cpsch
drm/amdkfd: move locking outside of unmap_queues_cpsch
drm/amdkfd: Avoid name confusion involved in queue unmapping
drm/amdkfd: Drop _nocpsch suffix from shared functions
drm/amdkfd: Reuse CHIP_* from amdgpu v2
drm/amdkfd: Use VMID bitmap from KGD v2
drm/amdkfd: Adjust dequeue latencies and timeouts
drm/amdkfd: Rectify the jiffies calculation error with milliseconds v2
drm/amdkfd: Fix suspend/resume issue on Carrizo v2
drm/amdkfd: Reorganize kfd resume code
Last batch of drm/i915 features for v4.15:
- transparent huge pages support (Matthew)
- uapi: I915_PARAM_HAS_SCHEDULER into a capability bitmask (Chris)
- execlists: preemption (Chris)
- scheduler: user defined priorities (Chris)
- execlists optimization (Michał)
- plenty of display fixes (Imre)
- has_ipc fix (Rodrigo)
- platform features definition refactoring (Rodrigo)
- legacy cursor update fix (Maarten)
- fix vblank waits for cursor updates (Maarten)
- reprogram dmc firmware on resume, dmc state fix (Imre)
- remove use_mmio_flip module parameter (Maarten)
- wa fixes (Oscar)
- huc/guc firmware refacoring (Sagar, Michal)
- push encoder specific code to encoder hooks (Jani)
- DP MST fixes (Dhinakaran)
- eDP power sequencing fixes (Manasi)
- selftest updates (Chris, Matthew)
- mmu notifier cpu hotplug deadlock fix (Daniel)
- more VBT parser refactoring (Jani)
- max pipe refactoring (Mika Kahola)
- rc6/rps refactoring and separation (Sagar)
- userptr lockdep fix (Chris)
- tracepoint fixes and defunct tracepoint removal (Chris)
- use rcu instead of abusing stop_machine (Daniel)
- plenty of other fixes all around (Everyone)
* tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel: (145 commits)
drm/i915: Update DRIVER_DATE to 20171012
drm/i915: Simplify intel_sanitize_enable_ppgtt
drm/i915/userptr: Drop struct_mutex before cleanup
drm/i915/dp: limit sink rates based on rate
drm/i915/dp: centralize max source rate conditions more
drm/i915: Allow PCH platforms fall back to BIOS LVDS mode
drm/i915: Reuse normal state readout for LVDS/DVO fixed mode
drm/i915: Use rcu instead of stop_machine in set_wedged
drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup
drm/i915: Create generic functions to control RC6, RPS
drm/i915: Create generic function to setup LLC ring frequency table
drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled
drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm"
drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lock
drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm"
drm/i915: Separate RPS and RC6 handling for CHV
drm/i915: Separate RPS and RC6 handling for VLV
drm/i915: Separate RPS and RC6 handling for BDW
drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps
drm/i915: Separate RPS and RC6 handling for gen6+
...
Last set of features for 4.15. Highlights:
- Add a bo flag to allow buffers to opt out of implicit sync
- Add ctx priority setting interface
- Lots more powerplay cleanups
- Start to plumb through vram lost infrastructure for gpu reset
- ttm support for huge pages
- misc cleanups and bug fixes
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (73 commits)
drm/amd/powerplay: Place the constant on the right side of the test
drm/amd/powerplay: Remove useless variable
drm/amd/powerplay: Don't cast kzalloc() return value
drm/amdgpu: allow GTT overcommit during bind
drm/amdgpu: linear validate first then bind to GART
drm/amd/pp: Fix overflow when setup decf/pix/disp dpm table.
drm/amd/pp: thermal control not enabled on vega10.
drm/amdgpu: busywait KIQ register accessing (v4)
drm/amdgpu: report more amdgpu_fence_info
drm/amdgpu:don't check soft_reset for sriov
drm/amdgpu:fix duplicated setting job's vram_lost
drm/amdgpu:reduce wb to 512 slot
drm/amdgpu: fix regresstion on SR-IOV gpu reset failed
drm/amd/powerplay: Tidy up cz_dpm_powerup_vce()
drm/amd/powerplay: Tidy up cz_dpm_powerdown_vce()
drm/amd/powerplay: Tidy up cz_dpm_update_vce_dpm()
drm/amd/powerplay: Tidy up cz_dpm_update_uvd_dpm()
drm/amd/powerplay: Tidy up cz_dpm_powerup_uvd()
drm/amd/powerplay: Tidy up cz_dpm_powerdown_uvd()
drm/amd/powerplay: Tidy up cz_start_dpm()
...
VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
writes from the CPU, so we use the DMA engine to DMA 32-bit values
into registers instead. That sleeps, so we can't do it from the top
half.
As a solution, use an interrupt thread so that all our writes happen
when sleeping is is allowed.
v2: Use IRQF_ONESHOT (suggested by Boris)
v3: Style nitpicks.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014001255.32005-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2)
Move the constant on the right side of the comparison in order to
make the code easier to read.
Issue found by checkpatch script:
* WARNING: Comparisons should place the constant on the right side of
the test
Signed-off-by: Georgiana Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The result variable is initialized at the beginning of the function, but
its value does not change during the function execution. Thus, remove the
variable and return the SUCCESS value, which is 0.
Issue found by coccinelle script:
* Unneeded variable: "result". Return "0"
Path to the cocci script: scripts/coccinelle/misc/returnvar.cocci
Signed-off-by: Georgiana Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kzalloc function returns a void pointer and the assignment
operator converts it to the type of pointer it is assigned to.
Therefore, there is no need to cast.
Issue found by alloc_cast.cocci:
* WARNING: casting value returned by memory allocation function
to <struct type> is useless.
Path to the cocci script: scripts/coccinelle/api/alloc/alloc_cast.cocci
Signed-off-by: Georgiana Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While binding BOs to GART we need to allow a bit overcommit in the GTT
domain. Otherwise we can never use the full GART space when GART size=GTT size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VM emulation for old UVD/VCE we need to validate the BO with linear
VRAM flag set first and then eventually bind it to GART.
Validating with linear VRAM flag set can move the BO to GART making
UVD/VCE read/write from an unbound GART BO.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear the count in the single table setup function to
avoid missing any tables.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
regression issue.
caused by "f12f9f5e5d455edebc01"
forget to set start_thermal_controller function point.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register accessing is performed when IRQ is disabled. Never sleep in
this function.
Known issue: dead sleep in many use cases of index/data registers.
v2:
- wrap polling fence functions.
- don't trigger IRQ for polling in case of wrongly fence signal.
v3:
- handle wrap round gracefully.
- add comments for polling function
v4:
- don't return negative timeout confused with error code
Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only for GFX ring. This can help checking MCBP feature.
The fence at the end of the frame will indicate the completion status.
If the frame completed normally, the fence is written to the address
given in the EVENT_WRITE_EOP packet. If preemption occurred in the
previous IB the address is adjusted by 2 DWs. If work submitted in the
frame was reset before completion, the fence address is adjusted by
four DWs. In the case that preemption occurred, and before preemption
completed a reset was initiated, the address will be adjusted with six
DWs
Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
with current WB usage we only use 57 slots, so 512
is extreamly sufficient, and reduce to 512 can
make WB fit into one page.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fw ucode is corrupted after vf flr by PSP so ucode_init() is
a must in psp_hw_init othewise KIQ/KCQ enabling will fail
Revert "drm/amdgpu: refine code delete duplicated error handling"
This reverts commit e57b87ff828f95efe992468e6d18c2c059b27aa9.
Revert "drm/amdgpu: move amdgpu_ucode_init_bo to amdgpu_device.c"
This reverts commit 815b8f8595148d06a64d2ce4282e8e80dfcb02f1.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PP_CAP macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PP_CAP macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PP_CAP and tidy up indentation.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PP_CAP and tidy up indentation.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PP_CAP and simplify enable/disable logic.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PP_CAP and tidy up indentation.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused variables.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise somebody could try to evict it at the same time and try to use
half torn down structures.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't use compound pages at the moment. Take this into account when
freeing them.
Signed-off-by: Christian König <christian.koenig@amd.comd>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: vram -> VRAM in comment
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need to loop over all IBs for old UVD/VCE command stream patching.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the trace before we signal the scheduler fence and drop the
scheduler fence reference directly before we free the job.
v2: keep extra s_fence reference
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Liu, Monk <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
