Restore the +x bit to va_128TBswitch.sh, which got dropped from the
previous patch, somehow.
Link: https://lkml.kernel.org/r/20220708090646.34927-1-adam@wowsignal.io
Fixes: 1afd01d43efc3 ("selftests/vm: Only run 128TBswitch with 5-level paging")
Signed-off-by: Adam Sindelar <adam@wowsignal.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Once line card is activated, check the FW version and PSID are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once line card is provisioned, check if HW revision and INI version
are exposed on associated nested auxiliary device.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
test_probe_user fails on architectures where libc uses
socketcall(SYS_CONNECT) instead of connect(). Fix by attaching
to socketcall as well.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220726134008.256968-3-iii@linux.ibm.com
The previous commit fixed a bug in the bpf_skb_set_tunnel_key helper to
avoid dropping packets whose outer source IP address isn't assigned to a
host interface. This commit changes the corresponding selftest to not
assign the outer source IP address to an interface.
Not assigning the source IP to an interface causes two issues in the
existing test:
1. The ARP requests will fail for that IP address so we need to add the
ARP entry manually.
2. The encapsulated ICMP echo reply traffic will not reach the VXLAN
device. It will be dropped by the stack before, because the
outer destination IP is unknown.
To solve 2., we have two choices. Either we perform decapsulation
ourselves in a BPF program attached at veth1 (the base device for the
VXLAN device), or we switch the outer destination address when we
receive the packet at veth1, such that the stack properly demultiplexes
it to the VXLAN device afterward.
This commit implements the second approach, where we switch the outer
destination address from the unassigned IP address to the assigned one,
only for VXLAN traffic ingressing veth1.
Then, at the vxlan device, the BPF program that checks the output of
bpf_skb_get_tunnel_key needs to be updated as the expected local IP
address is now the unassigned one.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4addde76eaf3477a58975bef15ed2788c44e5f55.1658759380.git.paul@isovalent.com
After all the soft validation of the region has completed, convey the
region configuration to hardware while being careful to commit decoders
in specification mandated order. In addition to programming the endpoint
decoder base-address, interleave ways and granularity, the switch
decoder target lists are also established.
While the kernel can enforce spec-mandated commit order, it can not
enforce spec-mandated reset order. For example, the kernel can't stop
someone from removing an endpoint device that is occupying decoderN in a
switch decoder where decoderN+1 is also committed. To reset decoderN,
decoderN+1 must be torn down first. That "tear down the world"
implementation is saved for a follow-on patch.
Callback operations are provided for the 'commit' and 'reset'
operations. While those callbacks may prove useful for CXL accelerators
(Type-2 devices with memory) the primary motivation is to enable a
simple way for cxl_test to intercept those operations.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784338418.1758207.14659830845389904356.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently the ptrace-gpr test only tests the GET/SET(FP)REGS ptrace
APIs. But there's an alternate (older) API, called PEEK/POKEUSR.
Add some minimal testing of PEEK/POKEUSR of the FPRs. This is sufficient
to detect the bug that was fixed recently in the 32-bit ptrace FPR
handling.
Depends-on: 8e12784444 ("powerpc/32: Fix overread/overwrite of thread_struct via ptrace")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-13-mpe@ellerman.id.au
The ptrace-gpr test uses fixed values to test that registers can be
read/written via ptrace. In particular it sets all GPRs to 1, which
means the test could miss some types of bugs - eg. if the kernel was
only returning the low word.
So generate some random values at startup and use those instead.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-12-mpe@ellerman.id.au
The ptrace-gpr test includes some inline asm to load GPR and FPR
registers. It then goes back to C to wait for the parent to trace it and
then checks register contents.
The split between inline asm and C is fragile, it relies on the compiler
not using any non-volatile GPRs after the inline asm block. It also
requires a very large and unwieldy inline asm block.
So convert the logic to set registers, wait, and store registers to a
single asm function, meaning there's no window for the compiler to
intervene.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-10-mpe@ellerman.id.au
Some of the ptrace tests check the contents of floating pointer
registers. Currently these use float, which is always 4 bytes, but the
ptrace API supports saving/restoring 8 bytes per register, so switch to
using doubles to exercise the code more fully.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-8-mpe@ellerman.id.au
Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore r2 (TOC pointer), but none of the
selftests change r2, so it's unnecessary to save it by default.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-5-mpe@ellerman.id.au
Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore CR, but none of the selftests
tests touch non-volatile CR fields, so it's unnecessary to save them by
default.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-4-mpe@ellerman.id.au
Currently all ptrace tests are built 64-bit and with TM enabled.
Only the TM tests need TM enabled, so split those out into a separate
variable so that can be specified precisely.
Split the rest of the tests into a variable, and add -m64 to CFLAGS for
those tests, so that in a subsequent patch some tests can be made to
build 32-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-3-mpe@ellerman.id.au
Set LOCAL_HDRS so header changes cause rebuilds. The lib.mk logic adds
all the headers in LOCAL_HDRS as dependencies, so there's no need to
also list them explicitly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-2-mpe@ellerman.id.au
The PUSH/POP_BASIC_STACK helpers in basic_asm.h do not ensure that the
stack pointer is always 16-byte aligned, which is required per the ABI.
Fix the macros to do the alignment if the caller fails to.
Currently only one caller passes a non-aligned size, tm_signal_self(),
which hasn't been caught in testing, presumably because it's a leaf
function.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-1-mpe@ellerman.id.au
The commit 208003254c32 ("selftests/kprobe: Do not test for GRP/
without event failures") removed a syntax which is no more cause
a syntax error (NO_EVENT_NAME error with GRP/).
However, there are another case (NO_EVENT_NAME error without GRP/)
which causes a same error. This adds a test for that case.
Link: https://lkml.kernel.org/r/165812790993.1377963.9762767354560397298.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A new feature is added where kprobes (and other probes) do not need to
explicitly state the event name when creating a probe. The event name will
come from what is being attached.
That is:
# echo 'p:foo/ vfs_read' > kprobe_events
Will no longer error, but instead create an event:
# cat kprobe_events
p:foo/p_vfs_read_0 vfs_read
This should not be tested as an error case anymore. Remove it from the
selftest as now this feature "breaks" the selftest as it no longer fails
as expected.
Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan@quicinc.com/
Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add kprobe and eprobe event test for new GRP/ only format.
Link: https://lore.kernel.org/all/1656296348-16111-5-git-send-email-quic_linyyuan@quicinc.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
* Fix use of sched_setaffinity in selftests
* Sync kernel headers to tools
* Fix KVM_STATS_UNIT_MAX
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLaTFwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO5Dwf/bRHhFs7XXdC5YU687bEFq/8/XCbY
wczM6cEIsWk0chzx92xIXzjb6DKPhrUFjGNH2C55XhLwHhCCUI+Q0zCfZ89ghjdX
Fe3fNcs6SAq6aLPjRBkk0+vt1jq233KzIV/GQJ5FivocPlWX562FXVEXoB/T26Ml
ljTmtPBn4Hd+LIE+7+HED2qCNzvNYtx3KGGTsZR7hcjoQmfFjXg+OTN0Uqsa+enW
lCEcN/gDMaTWFxY7lII63IJA4mE4WkdfYWjzuzvfUFsNU0IQZk+NrVZpiAP9zXeS
20o9nzetS7h1enLWqdGvJ+m5ot19l24nJeWZ8QQsS3T4XF2h7vL0lY/WBg==
=BDnJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
Daniel Borkmann says:
====================
bpf-next 2022-07-22
We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).
The main changes are:
1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.
2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
syscalls through kprobe mechanism, from Andrii Nakryiko.
3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
function, from Song Liu & Jiri Olsa.
4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.
5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
with kernel symbols, from Alan Maguire.
6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.
7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.
8) libbpf support for writing custom perf event readers, from Jon Doron.
9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.
10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.
11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.
12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.
13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.
14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.
15) Make non-prealloced BPF map allocations low priority to play better with
memcg limits, from Yafang Shao.
16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.
17) Various smaller cleanups and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
bpf: Simplify bpf_prog_pack_[size|mask]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
bpf, x64: Allow to use caller address from stack
ftrace: Allow IPMODIFY and DIRECT ops on the same function
ftrace: Add modify_ftrace_direct_multi_nolock
bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
selftests/bpf: Fix test_verifier failed test in unprivileged mode
selftests/bpf: Add negative tests for new nf_conntrack kfuncs
selftests/bpf: Add tests for new nf_conntrack kfuncs
selftests/bpf: Add verifier tests for trusted kfunc args
net: netfilter: Add kfuncs to set and change CT status
net: netfilter: Add kfuncs to set and change CT timeout
net: netfilter: Add kfuncs to allocate and insert CT
net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
bpf: Add documentation for kfuncs
bpf: Add support for forcing kfunc args to be trusted
bpf: Switch to new kfunc flags infrastructure
tools/resolve_btfids: Add support for 8-byte BTF sets
bpf: Introduce 8-byte BTF set
...
====================
Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before change:
selftests: bpf: test_xdp_veth.sh
Couldn't retrieve pinned program '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
selftests: xdp_veth [SKIP]
ok 20 selftests: bpf: test_xdp_veth.sh # SKIP
After change:
PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data.
64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.320 ms
--- 10.1.1.33 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.320/0.320/0.320/0.000 ms
selftests: xdp_veth [PASS]
For the test case, the following can be found:
ls /sys/fs/bpf/test_xdp_veth/progs/redirect_map_0
ls: cannot access '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
ls /sys/fs/bpf/test_xdp_veth/progs/
xdp_redirect_map_0 xdp_redirect_map_1 xdp_redirect_map_2
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220719082430.9916-1-jie2x.zhou@intel.com
Ping sockets don't appear to make any attempt to preserve flow labels
created and set by userspace using IPV6_FLOWINFO_SEND. Instead they are
clobbered by autolabels (if enabled) or zero.
Grab the flowlabel out of the msghdr similar to how rawv6_sendmsg does
it and move the memset up so it doesn't get zeroed after.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loading the BTF won't be permitted without privileges, hence only test
for privileged mode by setting the prog type. This makes the
test_verifier show 0 failures when unprivileged BPF is enabled.
Fixes: 41188e9e9d ("selftest/bpf: Test for use-after-free bug fix in inline_bpf_loop")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-14-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test cases we care about and ensure improper usage is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-13-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure verifier rejects the bad cases and ensure the good case keeps
working. The selftests make use of the bpf_kfunc_call_test_ref kfunc
added in the previous patch only for verification.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-11-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of populating multiple sets to indicate some attribute and then
researching the same BTF ID in them, prepare a single unified BTF set
which indicates whether a kfunc is allowed to be called, and also its
attributes if any at the same time. Now, only one call is needed to
perform the lookup for both kfunc availability and its attributes.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Previously the target routing specifics of switch decoders and platform
CXL window resource tracking of root decoders were factored out of
'struct cxl_decoder'. While switch decoders translate from SPA to
downstream ports, endpoint decoders translate from SPA to DPA.
This patch, 3 of 3, adds a 'struct cxl_endpoint_decoder' that tracks an
endpoint-specific Device Physical Address (DPA) resource. For now this
just defines ->dpa_res, a follow-on patch will handle requesting DPA
resource ranges from a device-DPA resource tree.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784327088.1758207.15502834501671201192.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently 'struct cxl_decoder' contains the superset of attributes
needed for all decoder types. Before more type-specific attributes are
added to the common definition, reorganize 'struct cxl_decoder' into type
specific objects.
This patch, the first of three, factors out a cxl_switch_decoder type.
See the new kdoc for what a 'struct cxl_switch_decoder' represents in a
CXL topology.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/165784325340.1758207.5064717153608954960.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch fixes a build error reported in the link. [0]
unix_connect.c: In function ‘unix_connect_test’:
unix_connect.c:115:55: error: expected identifier before ‘(’ token
#define offsetof(type, member) ((size_t)&((type *)0)->(member))
^
unix_connect.c:128:12: note: in expansion of macro ‘offsetof’
addrlen = offsetof(struct sockaddr_un, sun_path) + variant->len;
^~~~~~~~
We can fix this by removing () around member, but checkpatch will complain
about it, and the root cause of the build failure is that I followed the
warning and fixed this in the v2 -> v3 change of the blamed commit. [1]
CHECK: Macro argument 'member' may be better as '(member)' to avoid precedence issues
#33: FILE: tools/testing/selftests/net/af_unix/unix_connect.c:115:
+#define offsetof(type, member) ((size_t)&((type *)0)->member)
To avoid this warning, let's use offsetof() defined in stddef.h instead.
[0]: https://lore.kernel.org/linux-mm/202207182205.FrkMeDZT-lkp@intel.com/
[1]: https://lore.kernel.org/netdev/20220702154818.66761-1-kuniyu@amazon.com/
Fixes: e95ab1d852 ("selftests: net: af_unix: Test connect() with different netns.")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220720005750.16600-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building selftests out of the kernel tree the gpio.h the include
path is incorrect and the build falls back to the system includes
which may be outdated.
Add the KHDR_INCLUDES to the CFLAGS to include the gpio.h from the
build tree.
Fixes: 4f4d0af7b2 ("selftests: gpio: restore CFLAGS options")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The snprintf() function returns the number of bytes which *would*
have been copied if there were space. In other words, it can be
> sizeof(pin_path).
Fixes: c0fa1b6c3e ("bpf: btf: Add BTF tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+aD/tZMkgOUw+@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test validating that libbpf adjusts (and reflects adjusted) ringbuf
size early, before bpf_object is loaded. Also make sure we can't
successfully resize ringbuf map after bpf_object is loaded.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220715230952.2219271-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a simple big 16MB array and validate access to the very last byte of
it to make sure that kernel supports > KMALLOC_MAX_SIZE value_size for
BPF array maps (which are backing .bss in this case).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220715053146.1291891-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert few selftest that used plain SEC("kprobe") with arch-specific
syscall wrapper prefix to ksyscall/kretsyscall and corresponding
BPF_KSYSCALL macro. test_probe_user.c is especially benefiting from this
simplification.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Exercise libbpf's logic for unknown __weak virtual __kconfig externs.
USDT selftests are already excercising non-weak known virtual extern
already (LINUX_HAS_BPF_COOKIE), so no need to add explicit tests for it.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220719020830.3479482-1-gshan@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Booting with vsyscall=xonly results in the following vsyscall VMA:
ffffffffff600000-ffffffffff601000 --xp ... [vsyscall]
Test does read from fixed vsyscall address to determine if kernel
supports vsyscall page but it doesn't work because, well, vsyscall
page is execute only.
Fix test by trying to execute from the first byte of the page which
contains gettimeofday() stub. This should work because vsyscall
entry points have stable addresses by design.
Alexey, avoiding parsing .config, /proc/config.gz and
/proc/cmdline at all costs.
Link: https://lkml.kernel.org/r/Ys2KgeiEMboU8Ytu@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: <dylanbhatch@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The objective is to test device migration mechanism in pages marked as
COW, for private and coherent device type. In case of writing to COW
private page(s), a page fault will migrate pages back to system memory
first. Then, these pages will be duplicated. In case of COW device
coherent type, pages are duplicated directly from device memory.
Link: https://lkml.kernel.org/r/20220715150521.18165-15-alex.sierra@amd.com
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The intention is to test hmm device coherent type under different get user
pages paths. Also, test gup with FOLL_LONGTERM flag set in device
coherent pages. These pages should get migrated back to system memory.
Link: https://lkml.kernel.org/r/20220715150521.18165-14-alex.sierra@amd.com
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add two more parameters to set spm_addr_dev0 & spm_addr_dev1 addresses.
These two parameters configure the start SP addresses for each device in
test_hmm driver. Consequently, this configures zone device type as
coherent.
Link: https://lkml.kernel.org/r/20220715150521.18165-13-alex.sierra@amd.com
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test cases such as migrate_fault and migrate_multiple, were modified to
explicit migrate from device to sys memory without the need of page
faults, when using device coherent type.
Snapshot test case updated to read memory device type first and based on
that, get the proper returned results migrate_ping_pong test case added to
test explicit migration from device to sys memory for both private and
coherent zone types.
Helpers to migrate from device to sys memory and vicerversa were also
added.
Link: https://lkml.kernel.org/r/20220715150521.18165-12-alex.sierra@amd.com
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ipv4 arp_accept has a new option '2' to create new neighbor entries
only if the src ip is in the same subnet as an address configured on
the interface that received the garp message. This selftest tests all
options in arp_accept.
ipv6 has a sysctl endpoint, accept_untracked_na, that defines the
behavior for accepting untracked neighbor advertisements. A new option
similar to that of arp_accept for learning only from the same subnet is
added to accept_untracked_na. This selftest tests this new feature.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add some notes on how to run the test, update the policy file paths to
reflect recent upstream changes, prepare test for adding GID testing.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Not sure how this bug got in here but its been there since the original
merge. I think I tested the code on a system that wouldn't let me
clone() with CLONE_NEWUSER flag set so had to comment out these
test_userns invocations.
Trying to map UID 0 inside the userns to UID 0 outside will never work,
even with CAP_SETUID. The code is supposed to test whether we can map
UID 0 in the userns to the UID of the parent process (the one with
CAP_SETUID that is writing the /proc/[pid]/uid_map file).
Signed-off-by: Micah Morton <mortonm@chromium.org>
The current vgic_init test wrongly assumes that the host cannot
multiple versions of the GIC architecture, while v2 emulation
on v3 has almost always been supported (it was supported before
the standalone v3 emulation).
Tweak the test to support multiple GIC incarnations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 3f4db37e20 ("KVM: arm64: selftests: Make vgic_init gic version agnostic")
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Link: https://lore.kernel.org/r/20220714154108.3531213-1-maz@kernel.org
Alexei reported crash by running test_progs -j on system
with 32 cpus.
It turned out the kprobe_multi bench test that attaches all
ftrace-able functions will race with bpf_dispatcher_update,
that calls bpf_arch_text_poke on bpf_dispatcher_xdp_func,
which is ftrace-able function.
Ftrace is not aware of this update so this will cause
ftrace_bug with:
WARNING: CPU: 6 PID: 1985 at
arch/x86/kernel/ftrace.c:94 ftrace_verify_code+0x27/0x50
...
ftrace_replace_code+0xa3/0x170
ftrace_modify_all_code+0xbd/0x150
ftrace_startup_enable+0x3f/0x50
ftrace_startup+0x98/0xf0
register_ftrace_function+0x20/0x60
register_fprobe_ips+0xbb/0xd0
bpf_kprobe_multi_link_attach+0x179/0x430
__sys_bpf+0x18a1/0x2440
...
------------[ ftrace bug ]------------
ftrace failed to modify
[<ffffffff818d9380>] bpf_dispatcher_xdp_func+0x0/0x10
actual: ffffffe9:7b:ffffff9c:77:1e
Setting ftrace call site to call ftrace function
It looks like we need some way to hide some functions
from ftrace, but meanwhile we workaround this by skipping
bpf_dispatcher_xdp_func from kprobe_multi bench test.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220714082316.479181-1-jolsa@kernel.org
The khdr make target has been removed, so drop it from the landlock
Makefile dependencies as well as related include paths that are
standard for headers in the kernel tree.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So we have proper counters at the end of a test. We also print the
kselftest header at the end of the test, so we don't mix with the output
of the child process. There is only this one test anyhow.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So the user can decide how long the test should run.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The sanity check takes a while. If you do repeated checks when
debugging, this is time consuming. Add a parameter to skip it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It is easier to check if you need to add an include if the existing ones
are sorted.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.
Fixes: 7290ce1423 ("selftests/timers: Add clocksource-switch test from timetest suite")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So we have proper counters at the end of a test, e.g.:
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So we have proper counters at the end of a test, e.g.:
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:8 error:0
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Mixing up argc/argv went unnoticed because they were not used. Still,
this is worth fixing.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Toolchains with an include file 'sys/timex.h' based on 3.18 will have a
'clock_adjtime' definition added, so it can't be static in the code:
valid-adjtimex.c:43:12: error: static declaration of ‘clock_adjtime’ follows non-static declaration
Fixes: e03a58c320 ("kselftests: timers: Add adjtimex SETOFFSET validity tests")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
tools/testing/selftests/bpf/progs/test_xdp_noinline.c:407:9-10: WARNING:
return of 0/1 in function 'decap_v4' with return type bool
tools/testing/selftests/bpf/progs/test_xdp_noinline.c:389:9-10: WARNING:
return of 0/1 in function 'decap_v6' with return type bool
tools/testing/selftests/bpf/progs/test_xdp_noinline.c:290:9-10: WARNING:
return of 0/1 in function 'encap_v6' with return type bool
tools/testing/selftests/bpf/progs/test_xdp_noinline.c:264:9-10: WARNING:
return of 0/1 in function 'parse_tcp' with return type bool
tools/testing/selftests/bpf/progs/test_xdp_noinline.c:242:9-10: WARNING:
return of 0/1 in function 'parse_udp' with return type bool
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220714015647.25074-1-xiaolinkui@kylinos.cn
Use cpuid() to get CPUID.0x0 in cpu_vendor_string_is(), thus eliminating
the last open coded usage of CPUID (ignoring debug_regs.c, which emits
CPUID from the guest to trigger a VM-Exit and doesn't actually care about
the results of CPUID).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-42-seanjc@google.com
Provide informative error messages for the various checks related to
requesting access to XSAVE features that are buried behind XSAVE Feature
Disabling (XFD).
Opportunistically rename the helper to have "require" in the name so that
it's somewhat obvious that the helper may skip the test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-41-seanjc@google.com
Skip the AMX test instead of silently returning if the host kernel
doesn't support ARCH_REQ_XCOMP_GUEST_PERM. KVM didn't support XFD until
v5.17, so it's extremely unlikely allowing the test to run on a pre-v5.15
kernel is the right thing to do.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-40-seanjc@google.com
Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(),
simply checking host CPUID doesn't guarantee KVM supports AMX/XFD.
Opportunistically hoist the check above the bit check; if XFD isn't
supported, it's far better to get a "not supported at all" message, as
opposed to a "feature X isn't supported" message".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-39-seanjc@google.com
Rename kvm_get_supported_cpuid_index() to __kvm_get_supported_cpuid_entry()
to better show its relationship to kvm_get_supported_cpuid_entry(), and
because the helper returns a CPUID entry, not the index of an entry.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-37-seanjc@google.com
Use kvm_get_supported_cpuid_entry() instead of
kvm_get_supported_cpuid_index() when passing in '0' for the index, which
just so happens to be the case in all remaining users of
kvm_get_supported_cpuid_index() except kvm_get_supported_cpuid_entry().
Keep the helper as there may be users in the future, and it's not doing
any harm.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-36-seanjc@google.com
Add this_cpu_has() to query an X86_FEATURE_* via cpuid(), i.e. to query a
feature from L1 (or L2) guest code. Arbitrarily select the AMX test to
be the first user.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-33-seanjc@google.com
Set the function/index for CPUID in the helper instead of relying on the
caller to do so. In addition to reducing the risk of consuming an
uninitialized ECX, having the function/index embedded in the call makes
it easier to understand what is being checked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-32-seanjc@google.com
Tag the returned CPUID pointers from kvm_get_supported_cpuid(),
kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const"
to prevent reintroducing the broken pattern of modifying the static
"cpuid" variable used by kvm_get_supported_cpuid() to cache the results
of KVM_GET_SUPPORTED_CPUID.
Update downstream consumers as needed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-31-seanjc@google.com
Use vcpu_{set,clear}_cpuid_feature() to toggle nested VMX support in the
vCPU CPUID module in the nVMX state test. Drop CPUID_VMX as there are
no longer any users.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-29-seanjc@google.com
Use the vCPU's persistent CPUID array directly when manipulating the set
of exposed Hyper-V CPUID features. Drop set_cpuid() to route all future
modification through the vCPU helpers; the Hyper-V features test was the
last user.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-27-seanjc@google.com
Add a new helper, vcpu_clear_cpuid_entry(), to do a RMW operation on the
vCPU's CPUID model to clear a given CPUID entry, and use it to clear
KVM's paravirt feature instead of operating on kvm_get_supported_cpuid()'s
static "cpuid" variable. This also eliminates a user of
the soon-be-defunct set_cpuid() helper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-26-seanjc@google.com
Use vcpu_clear_cpuid_feature() to the MONITOR/MWAIT CPUID feature bit in
the MONITOR/MWAIT quirk test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to set a vCPU's guest.MAXPHYADDR, and use it in the test
that verifies the emulator returns an error on an unknown instruction
when KVM emulates in response to an EPT violation with a GPA that is
legal in hardware but illegal with respect to the guest's MAXPHYADDR.
Add a helper even though there's only a single user at this time. Before
its removal, mmu_role_test also stuffed guest.MAXPHYADDR, and the helper
provides a small amount of clarity.
More importantly, this eliminates a set_cpuid() user and an instance of
modifying kvm_get_supported_cpuid()'s static "cpuid".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-25-seanjc@google.com
Use vm->pa_bits to generate the mask of physical address bits that are
reserved in page table entries. vm->pa_bits is set when the VM is
created, i.e. it's guaranteed to be valid when populating page tables.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-24-seanjc@google.com
Add helpers to get a specific CPUID entry for a given vCPU, and to toggle
a specific CPUID-based feature for a vCPU. The helpers will reduce the
amount of boilerplate code needed to tweak a vCPU's CPUID model, improve
code clarity, and most importantly move tests away from modifying the
static "cpuid" returned by kvm_get_supported_cpuid().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-23-seanjc@google.com
Rename get_cpuid() to get_cpuid_entry() to better reflect its behavior.
Leave set_cpuid() as is to avoid unnecessary churn, that helper will soon
be removed entirely.
Oppurtunistically tweak the implementation to avoid using a temporary
variable in anticipation of taggin the input @cpuid with "const".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-21-seanjc@google.com
Don't use a static variable for the Hyper-V supported CPUID array, the
helper unconditionally reallocates the array on every invocation (and all
callers free the array immediately after use). The array is intentionally
recreated and refilled because the set of supported CPUID features is
dependent on vCPU state, e.g. whether or not eVMCS has been enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-20-seanjc@google.com
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().
Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.
Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-19-seanjc@google.com
Split out the computation of the effective size of a kvm_cpuid2 struct
from allocate_kvm_cpuid2(), and modify both to take an arbitrary number
of entries. Future commits will add caching of a vCPU's CPUID model, and
will (a) be able to precisely size the entries array, and (b) will need
to know the effective size of the struct in order to copy to/from the
cache.
Expose the helpers so that the Hyper-V Features test can use them in the
(somewhat distant) future. The Hyper-V test very, very subtly relies on
propagating CPUID info across vCPU instances, and will need to make a
copy of the previous vCPU's CPUID information when it switches to using
the per-vCPU cache. Alternatively, KVM could provide helpers to
duplicate and/or copy a kvm_cpuid2 instance, but each is literally a
single line of code if the helpers are exposed, and it's not like the
size of kvm_cpuid2 is secret knowledge.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-18-seanjc@google.com
In the CPUID test, verify that KVM doesn't modify the kvm_cpuid2.entries
layout, i.e. that the order of entries and their flags is identical
between what the test provides via KVM_SET_CPUID2 and what KVM returns
via KVM_GET_CPUID2.
Asserting that the layouts match simplifies the test as there's no need
to iterate over both arrays.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-17-seanjc@google.com
Use kvm_cpu_has() in the stea-ltime test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().
Opportunistically define all of KVM's paravirt CPUID-based features.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-15-seanjc@google.com
Remove the MMU role test, which was made obsolete by KVM commit
feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN"). The
ongoing costs of keeping the test updated far outweigh any benefits,
e.g. the test _might_ be useful as an example or for documentation
purposes, but otherwise the test is dead weight.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-14-seanjc@google.com
Use kvm_cpu_has() in the CR4/CPUID sync test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-13-seanjc@google.com
Use kvm_cpu_has() in the AMX test instead of open coding equivalent
functionality using kvm_get_supported_cpuid_entry() and
kvm_get_supported_cpuid_index().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-12-seanjc@google.com
Check for _both_ XTILE data and cfg support in the AMX test instead of
checking for _either_ feature. Practically speaking, no sane CPU or vCPU
will support one but not the other, but the effective "or" behavior is
subtle and technically incorrect.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-11-seanjc@google.com
Use kvm_cpu_has() in the XSS MSR test instead of open coding equivalent
functionality using kvm_get_supported_cpuid_index().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-10-seanjc@google.com
Drop a redundant vcpu_set_cpuid() from the PMU test. The vCPU's CPUID is
set to KVM's supported CPUID by vm_create_with_one_vcpu(), which was also
true back when the helper was named vm_create_default().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-9-seanjc@google.com
Use kvm_cpu_has() in the PMU test to query PDCM support instead of open
coding equivalent functionality using kvm_get_supported_cpuid_index().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-8-seanjc@google.com
Use kvm_cpu_has() to check for nested VMX support, and drop the helpers
now that their functionality is trivial to implement.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-7-seanjc@google.com
Use kvm_cpu_has() to check for nested SVM support, and drop the helpers
now that their functionality is trivial to implement.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-6-seanjc@google.com
Use kvm_cpu_has() in the SEV migration test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-5-seanjc@google.com
Add X86_FEATURE_* magic in the style of KVM-Unit-Tests' implementation,
where the CPUID function, index, output register, and output bit position
are embedded in the macro value. Add kvm_cpu_has() to query KVM's
supported CPUID and use it set_sregs_test, which is the most prolific
user of manual feature querying.
Opportunstically rename calc_cr4_feature_bits() to
calc_supported_cr4_feature_bits() to better capture how the CR4 bits are
chosen.
Link: https://lore.kernel.org/all/20210422005626.564163-1-ricarkol@google.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-4-seanjc@google.com
Rename X86_FEATURE_* macros to CPUID_* in various tests to free up the
X86_FEATURE_* names for KVM-Unit-Tests style CPUID automagic where the
function, leaf, register, and bit for the feature is embedded in its
macro value.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-3-seanjc@google.com
On x86-64, set KVM's supported CPUID as the vCPU's CPUID when recreating
a VM+vCPU to deduplicate code for state save/restore tests, and to
provide symmetry of sorts with respect to vm_create_with_one_vcpu(). The
extra KVM_SET_CPUID2 call is wasteful for Hyper-V, but ultimately is
nothing more than an expensive nop, and overriding the vCPU's CPUID with
the Hyper-V CPUID information is the only known scenario where a state
save/restore test wouldn't need/want the default CPUID.
Opportunistically use __weak for the default vm_compute_max_gfn(), it's
provided by tools' compiler.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-2-seanjc@google.com
Fix filename reporting in guest asserts by ensuring the GUEST_ASSERT
macro records __FILE__ and substituting REPORT_GUEST_ASSERT for many
repetitive calls to TEST_FAIL.
Previously filename was reported by using __FILE__ directly in the
selftest, wrongly assuming it would always be the same as where the
assertion failed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reported-by: Ricardo Koller <ricarkol@google.com>
Fixes: 4e18bccc2e
Link: https://lore.kernel.org/r/20220615193116.806312-5-coltonlewis@google.com
[sean: convert more TEST_FAIL => REPORT_GUEST_ASSERT instances]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Write REPORT_GUEST_ASSERT macros to pair with GUEST_ASSERT to abstract
and make consistent all guest assertion reporting. Every report
includes an explanatory string, a filename, and a line number.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20220615193116.806312-4-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Increase UCALL_MAX_ARGS to 7 to allow GUEST_ASSERT_4 to pass 3 builtin
ucall arguments specified in guest_assert_builtin_args plus 4
user-specified arguments.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20220615193116.806312-3-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Enumerate GUEST_ASSERT arguments to avoid magic indices to ucall.args.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20220615193116.806312-2-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a "UD" clause to KVM_X86_QUIRK_MWAIT_NEVER_FAULTS to make it clear
that the quirk only controls the #UD behavior of MONITOR/MWAIT. KVM
doesn't currently enforce fault checks when MONITOR/MWAIT are supported,
but that could change in the future. SVM also has a virtualization hole
in that it checks all faults before intercepts, and so "never faults" is
already a lie when running on SVM.
Fixes: bfbcc81bb8 ("KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220711225753.1073989-4-seanjc@google.com
Do not use GCC's "A" constraint to load EAX:EDX in wrmsr_safe(). Per
GCC's documenation on x86-specific constraints, "A" will not actually
load a 64-bit value into EAX:EDX on x86-64.
The a and d registers. This class is used for instructions that return
double word results in the ax:dx register pair. Single word values will
be allocated either in ax or dx. For example on i386 the following
implements rdtsc:
unsigned long long rdtsc (void)
{
unsigned long long tick;
__asm__ __volatile__("rdtsc":"=A"(tick));
return tick;
}
This is not correct on x86-64 as it would allocate tick in either ax or
dx. You have to use the following variant instead:
unsigned long long rdtsc (void)
{
unsigned int tickl, tickh;
__asm__ __volatile__("rdtsc":"=a"(tickl),"=d"(tickh));
return ((unsigned long long)tickh << 32)|tickl;
}
Because a u64 fits in a single 64-bit register, using "A" for selftests,
which are 64-bit only, results in GCC loading the value into either RAX
or RDX instead of splitting it across EAX:EDX.
E.g.:
kvm_exit: reason MSR_WRITE rip 0x402919 info 0 0
kvm_msr: msr_write 40000118 = 0x60000000001 (#GP)
...
With "A":
48 8b 43 08 mov 0x8(%rbx),%rax
49 b9 ba da ca ba 0a movabs $0xabacadaba,%r9
00 00 00
4c 8d 15 07 00 00 00 lea 0x7(%rip),%r10 # 402f44 <guest_msr+0x34>
4c 8d 1d 06 00 00 00 lea 0x6(%rip),%r11 # 402f4a <guest_msr+0x3a>
0f 30 wrmsr
With "a"/"d":
48 8b 53 08 mov 0x8(%rbx),%rdx
89 d0 mov %edx,%eax
48 c1 ea 20 shr $0x20,%rdx
49 b9 ba da ca ba 0a movabs $0xabacadaba,%r9
00 00 00
4c 8d 15 07 00 00 00 lea 0x7(%rip),%r10 # 402fc3 <guest_msr+0xb3>
4c 8d 1d 06 00 00 00 lea 0x6(%rip),%r11 # 402fc9 <guest_msr+0xb9>
0f 30 wrmsr
Fixes: 3b23054cd3 ("KVM: selftests: Add x86-64 support for exception fixup")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html#Machine-Constraints
[sean: use "& -1u", provide GCC blurb and link to documentation]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220714011115.3135828-1-seanjc@google.com
Add a couple of test-cases covering the newly introduced
features - priority update for the MPC subflow.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide valid inputs for RAX, RCX, and RDX when testing whether or not
KVM injects a #UD on MONITOR/MWAIT. SVM has a virtualization hole and
checks for _all_ faults before checking for intercepts, e.g. MONITOR with
an unsupported RCX will #GP before KVM gets a chance to intercept and
emulate.
Fixes: 2325d4dd73 ("KVM: selftests: Add MONITOR/MWAIT quirk test")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220711225753.1073989-3-seanjc@google.com
Fix a copy+paste error in monitor_mwait_test by switching one of the two
"monitor" instructions to an "mwait". The intent of the test is very
much to verify the quirk handles both MONITOR and MWAIT.
Fixes: 2325d4dd73 ("KVM: selftests: Add MONITOR/MWAIT quirk test")
Reported-by: Yuan Yao <yuan.yao@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220711225753.1073989-2-seanjc@google.com
add subtest verifying BPF ksym iter behaviour. The BPF ksym
iter program shows an example of dumping a format different to
/proc/kallsyms. It adds KIND and MAX_SIZE fields which represent the
kind of symbol (core kernel, module, ftrace, bpf, or kprobe) and
the maximum size the symbol can be. The latter is calculated from
the difference between current symbol value and the next symbol
value.
The key benefit for this iterator will likely be supporting in-kernel
data-gathering rather than dumping symbol details to userspace and
parsing the results.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/1657629105-7812-3-git-send-email-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Drop the KSFT_KHDR_INSTALL make target now that all use-cases have
been removed from the other kselftest Makefiles.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stop using the KSFT_KHDR_INSTALL flag as installing the kernel headers
from the kselftest Makefile is causing some issues. Instead, rely on
the headers to be installed directly by the top-level Makefile
"headers_install" make target prior to building kselftest.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Drop the "khdr" make target as it fails when the build directory is a
sub-directory of the source tree. Rely on the "headers_install"
target to have been run first instead.
For example, here's a typical error this patch is addressing:
$ make O=build -j32 kselftest-gen_tar
make[1]: Entering directory '/home/kernelci/linux/build'
make --no-builtin-rules INSTALL_HDR_PATH=/home/kernelci/linux/build/usr \
ARCH=x86 -C ../../.. headers_install
make[3]: Entering directory '/home/kernelci/linux'
Makefile:1022: ../scripts/Makefile.extrawarn: No such file or directory
The source directory is determined in the top-level Makefile as ".."
relatively to the "build" directory, but then the kselftest Makefile
switches to "-C ../../.." so "../scripts" then points one level higher
than the source tree e.g. "linux/../scripts" - which fails obviously.
There is no other use-case in the kernel tree where a sub-directory
Makefile tries to call a top-level make target, and it appears this
isn't really a valid thing to do.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make any kselftest test module (using the kselftest_module framework)
taint the kernel with TAINT_TEST on module load.
Also mark the module as a test module using MODULE_INFO(test, "Y") so
that other tools can tell this is a test module. We can't rely solely
on this, though, as these test modules are also often built-in.
Finally, update the kselftest documentation to mention that the kernel
should be tainted, and how to do so manually (as below).
Note that several selftests use kernel modules which are not based on
the kselftest_module framework, and so will not automatically taint the
kernel.
This can be done in two ways:
- Moving the module to the tools/testing directory. All modules under
this directory will taint the kernel.
- Adding the 'test' module property with:
MODULE_INFO(test, "Y")
Similarly, selftests which do not load modules into the kernel generally
should not taint the kernel (or possibly should only do so on failure),
as it's assumed that testing from user-space should be safe. Regardless,
they can write to /proc/sys/kernel/tainted if required.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The new script was not listed in the programs to test.
By consequence, some CIs running MPTCP selftests were not validating
these new tests. Note that MPTCP CI was validating it as it executes all
.sh scripts from 'tools/testing/selftests/net/mptcp' directory.
Fixes: 259a834fad ("selftests: mptcp: functional tests for the userspace PM type")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'enabled' state is reserved for committed decoders. By default,
cxl_test decoders are uncommitted at init time.
Fixes: 7c7d68db02 ("tools/testing/cxl: Enumerate mock decoders")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603888091.551046.6312322707378021172.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In support of testing DPA allocation mechanisms in the CXL core, the
cxl_test environment needs to support establishing and retrieving the
'pmem partition boundary.
Replace the platform_device_add_resources() method for delineating DPA
within an endpoint with an emulated DEV_SIZE amount of partitionable
capacity. Set DEV_SIZE such that an endpoint has enough capacity to
simultaneously participate in 8 distinct regions.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603887411.551046.13234212587991192347.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For the x2 host-bridge interleave windows, allow for a
x8-endpoint-interleave configuration per memory-type with each device
contributing the minimum 256MB extent. Similarly, for the x1 host-bridge
interleave windows, allow for a x4-endpoint-interleave configuration per
memory-type.
Bump up the number of decoders per-port to support hosting 8 regions.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603886721.551046.8682583835505795210.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A recent QEMU upgrade resulted in collisions between QEMU's chosen
location for PCI MMIO and cxl_test's fake address location for emulated
CXL purposes. This was great for testing resource collisions, but not so
great for continuing to test the nominal cases. Move cxl_test to the
top-of-memory where it is less likely to collide with other resources.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603886021.551046.12395967874222763381.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
To date the per-device-partition DPA range information has only been
used for enumeration purposes. In preparation for allocating regions
from available DPA capacity, convert those ranges into DPA-type resource
trees.
With resources and the new add_dpa_res() helper some open coded end
address calculations and debug prints can be cleaned.
The 'cxlds->pmem_res' and 'cxlds->ram_res' resources are child resources
of the total-device DPA space and they in turn will host DPA allocations
from cxl_endpoint_decoder instances (tracked by cxled->dpa_res).
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603878921.551046.8127845916514734142.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for growing a ->dpa_range attribute for endpoint
decoders, rename the current ->decoder_range to the more descriptive
->hpa_range.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603872867.551046.2170426227407458814.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-07-09
We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).
The main changes are:
1) Add new way for performing BTF type queries to BPF, from Daniel Müller.
2) Add inlining of calls to bpf_loop() helper when its function callback is
statically known, from Eduard Zingerman.
3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.
4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
hooks, from Stanislav Fomichev.
5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.
6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.
7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
selftests, from Magnus Karlsson & Maciej Fijalkowski.
8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.
9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.
10) Sockmap optimizations around throughput of UDP transmissions which have been
improved by 61%, from Cong Wang.
11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.
12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.
13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.
14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
macro, from James Hilliard.
15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.
16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
bpf: Correctly propagate errors up from bpf_core_composites_match
libbpf: Disable SEC pragma macro on GCC
bpf: Check attach_func_proto more carefully in check_return_code
selftests/bpf: Add test involving restrict type qualifier
bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
MAINTAINERS: Add entry for AF_XDP selftests files
selftests, xsk: Rename AF_XDP testing app
bpf, docs: Remove deprecated xsk libbpf APIs description
selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
libbpf, riscv: Use a0 for RC register
libbpf: Remove unnecessary usdt_rel_ip assignments
selftests/bpf: Fix few more compiler warnings
selftests/bpf: Fix bogus uninitialized variable warning
bpftool: Remove zlib feature test from Makefile
libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
selftests/bpf: Add type match test against kernel's task_struct
selftests/bpf: Add nested type to type based tests
...
====================
Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The usage header of pm_nl_ctl command doesn't match with the context. So
this patch adds the missing userspace PM keywords 'ann', 'rem', 'csf',
'dsf', 'events' and 'listen' in it.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There're some 'Terminated' messages in the output of userspace pm tests
script after killing './pm_nl_ctl events' processes:
Created network namespaces ns1, ns2 [OK]
./userspace_pm.sh: line 166: 13735 Terminated ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1
./userspace_pm.sh: line 172: 13737 Terminated ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1
Established IPv4 MPTCP Connection ns2 => ns1 [OK]
./userspace_pm.sh: line 166: 13753 Terminated ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1
./userspace_pm.sh: line 172: 13755 Terminated ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1
Established IPv6 MPTCP Connection ns2 => ns1 [OK]
ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [OK]
This patch adds a helper kill_wait(), in it using 'wait $pid 2>/dev/null'
commands after 'kill $pid' to avoid printing out these Terminated messages.
Use this helper instead of using 'kill $pid'.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds userspace pm subflow tests support for mptcp_join.sh
script. Add userspace pm create subflow and destroy test cases in
userspace_tests().
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds userspace pm tests support for mptcp_join.sh script. Add
userspace pm add_addr and rm_addr test cases in userspace_tests().
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned test measures the transfer run-time to verify
that the user-space program is able to use the full aggregate B/W.
Even on (virtual) link-speed-bound tests, debug kernel can slow
down the transfer enough to cause sporadic test failures.
Instead of unconditionally raising the maximum allowed run-time,
tweak when the running kernel is a debug one, and use some simple/
rough heuristic to guess such scenarios.
Note: this intentionally avoids looking for /boot/config-<version> as
the latter file is not always available in our reference CI
environments.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using the Makefile from tools/testing/selftests/net/forwarding/
all tests should be installed. Add no_forwarding.sh to the list of
"to be installed tests" where it has been missing so far.
Fixes: 476a4f05d9 ("selftests: forwarding: add a no_forwarding.sh test")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using the Makefile from tools/testing/selftests/net/forwarding/
all tests should be installed. Add local_termination.sh to the list of
"to be installed tests" where it has been missing so far.
Fixes: 90b9566aa5 ("selftests: forwarding: add a test for local_termination.sh")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_NF_CONNTRACK=m, struct bpf_ct_opts and enum member
BPF_F_CURRENT_NETNS are not exposed. This commit allows building the
xdp_synproxy selftest in such cases. Note that nf_conntrack must be
loaded before running the test if it's compiled as a module.
This commit also allows this selftest to be successfully compiled when
CONFIG_NF_CONNTRACK is disabled.
One unused local variable of type struct bpf_ct_opts is also removed.
Fixes: fb5cd0ce70 ("selftests/bpf: Add selftests for raw syncookie helpers")
Reported-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220708130319.1016294-1-maximmi@nvidia.com
Daniel Borkmann says:
====================
bpf 2022-07-08
We've added 3 non-merge commits during the last 2 day(s) which contain
a total of 7 files changed, 40 insertions(+), 24 deletions(-).
The main changes are:
1) Fix cBPF splat triggered by skb not having a mac header, from Eric Dumazet.
2) Fix spurious packet loss in generic XDP when pushing packets out (note
that native XDP is not affected by the issue), from Johan Almbladh.
3) Fix bpf_dynptr_{read,write}() helper signatures with flag argument before
its set in stone as UAPI, from Joanne Koong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
bpf: Make sure mac_header was set before using it
xdp: Fix spurious packet loss in generic XDP TX path
====================
Link: https://lore.kernel.org/r/20220708213418.19626-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
