[Why]
Cursor is missing on displays 2 and up when doing rotated
display groups in 1xnY setup. Calculation puts cursor
out of bounds so it is not enabled.
[How]
In dcn10_set_cursor_position(), add in viewport.y into cursor
calculations for 1xnY rotated display groups.
For pipe split, check viewport.y for both pipes and use lower one
to normalize cursor position before calculations.
Add odm 2:1 support ( using same calculations as pipe split ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently if VBIOSSMC_Result_UnknownCmd is returned as result of smu msg
there is no way to know. Put 1 in param so if 1 is returned, this unknown case is handled.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the system does not have hostvm enabled, disabling it for
DML validation will allow more modes to pass at lower voltage
levels.
[How]
When initializing HostVM save state to hubbub and read back
when populating DML pipes from context.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Use GPINT command to get PSR residency from FW.
[How]
Hook up PSR residency command to DSAT.
Since PSR Count Request is deprecated, we will use this.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dpp dto phase and modulo are programmed with actual dpp global clk
and pipe clk. Need to use actual dpp clk to prgoram dpp dto modulo
to get more accuracy ratio.
[How]
assign actual dpp clk to dccg for dpp modulo programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
open smu ip block meets with one-vf mode need
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enale the fine grain tuning function for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add the fine grain tuning function for vangogh.
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency or restore the default value.
Command guide:
echo "s level value" > pp_od_clk_voltage
"s" - set the sclk frequency
"level" - 0 or 1, "0" represents the min value, "1" represents
the max value
"value" - the target value of sclk frequency, it should be
limited in the safe range
echo "r" > pp_od_clk_voltage
"r" - reset the sclk frequency, restore the default value
instantly
echo "c" > pp_od_clk_voltage
"c" - commit the min and max value of sclk frequency to the system
only after the commit command, the setting target values by "s" command
will take effect.
Example:
1)check the default sclk frequency
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
2)use "s" -- set command to configure the min or max sclk frequency
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
3)use "r" -- reset command to restore the min and max sclk frequency
$ echo "r" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a delta in the dmub code
- add boot options
- add boot status
- remove unused auto_load_is_done func pointer
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_do_test_moves() is failing because of wrong
usable gart size calculation and throwing:
[drm:amdgpu_do_test_moves [amdgpu]] *ERROR* 0000000020bdc9f3 bind failed
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we actually expose the right number of planes we get
problems with modifier aware libva if we use an unsupported modifier.
So this ensures that we as much as possible use a modifier that
radeonsi can actually render to without going to extreme difficulty
to synchronize an extra DCC metadata plane with implicit sync.
Looking into the opaque metadata isn't ideal but this converts to
something mainly for the purpose of the userspace driver and falls
back properly if it isn't what we expect.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we use DCC modifiers this can increase the number of planes from
the initial 1 plane with metadata, so that we get a valid modifier
from getfb2.
Since the code didn't update the format_info getfb2 would only ever
return 1 plane with a modifier for which userspace expects > 1.
This moves the format lookup to amdgpu_display.c so we do not have
issues when DC is not compiled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also do the proper validation which was missed.
Besides the missing validation, not storing the objects in the
framebuffer led to wrong results in the getfb2 ioctl.
Note that this should really have been done for multi-plane
formats like NV12 already before modifiers landed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we have more than 4 displays we will run
into dummy irq calls or flip timout issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:5211:45: warning: ‘gfx_v7_0_ip_block’ defined but not used [-Wunused-const-variable=]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c:225: warning: Function parameter or member 'control' not described in 'smu_v11_0_i2c_transmit'
drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c:325: warning: Function parameter or member 'control' not described in 'smu_v11_0_i2c_receive'
drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c:325: warning: Function parameter or member 'data' not described in 'smu_v11_0_i2c_receive'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c:130:6: warning: no previous prototype for ‘amdgpu_fw_attestation_debugfs_init’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Function parameter or member 'resv' not described in 'amdgpu_vm_sdma_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Function parameter or member 'sync_mode' not described in 'amdgpu_vm_sdma_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Excess function parameter 'owner' description in 'amdgpu_vm_sdma_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Excess function parameter 'exclusive' description in 'amdgpu_vm_sdma_prepare'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or member 'resv' not described in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or member 'sync_mode' not described in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'owner' description in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'exclusive' description in 'amdgpu_vm_cpu_prepare'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1482:6: warning: no previous prototype for ‘amdgpu_ras_error_status_query’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:908:5: warning: no previous prototype for ‘amdgpu_ras_error_cure’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c:69: warning: Function parameter or member 'bo' not described in 'amdgpu_gmc_pd_addr'
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c:121: warning: Function parameter or member 'bo' not described in 'amdgpu_gmc_agp_addr'
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c:121: warning: Excess function parameter 'tbo' description in 'amdgpu_gmc_agp_addr'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'f' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'buf' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'size' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'pos' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'f' not described in 'amdgpu_debugfs_regs_write'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'buf' not described in 'amdgpu_debugfs_regs_write'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'size' not described in 'amdgpu_debugfs_regs_write'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'pos' not described in 'amdgpu_debugfs_regs_write'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c:271: warning: Function parameter or member 'id' not described in 'amdgpu_vmid_grab_reserved'
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c:523: warning: Function parameter or member 'vmhub' not described in 'amdgpu_vmid_reset'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c:35:5: warning: no previous prototype for ‘amdgpu_to_sched_priority’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c:122:5: warning: no previous prototype for ‘amdgpu_sched_ioctl’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c: In function ‘amdgpu_allocate_static_csa’:
drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c:40:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Monk.liu@amd.com
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:560:6: warning: no previous prototype for ‘amdgpu_virt_update_vf2pf_work_item’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:648: warning: Function parameter or member 'dev' not described in 'amdgpu_vram_mgr_free_sgt'
drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:648: warning: Function parameter or member 'dir' not described in 'amdgpu_vram_mgr_free_sgt'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c:86: warning: Function parameter or member 'f' not described in 'amdgpu_sync_get_owner'
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c:86: warning: Excess function parameter 'fence' description in 'amdgpu_sync_get_owner'
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c:182: warning: Excess function parameter 'adev' description in 'amdgpu_sync_vm_fence'
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c:203: warning: Function parameter or member 'adev' not described in 'amdgpu_sync_resv'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:121: warning: Function parameter or member 'freq' not described in 'amdgpu_pll_compute'
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:121: warning: Function parameter or member 'fb_div_p' not described in 'amdgpu_pll_compute'
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:121: warning: Function parameter or member 'frac_fb_div_p' not described in 'amdgpu_pll_compute'
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:121: warning: Function parameter or member 'ref_div_p' not described in 'amdgpu_pll_compute'
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:121: warning: Function parameter or member 'post_div_p' not described in 'amdgpu_pll_compute'
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:317: warning: Excess function parameter 'encoder' description in 'amdgpu_pll_get_shared_nondp_ppll'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:66: warning: Function parameter or member 'adev' not described in 'amdgpu_ib_get'
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:66: warning: Function parameter or member 'vm' not described in 'amdgpu_ib_get'
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:66: warning: Function parameter or member 'pool_type' not described in 'amdgpu_ib_get'
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:66: warning: Excess function parameter 'ring' description in 'amdgpu_ib_get'
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:125: warning: Function parameter or member 'ring' not described in 'amdgpu_ib_schedule'
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:125: warning: Function parameter or member 'job' not described in 'amdgpu_ib_schedule'
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:125: warning: Excess function parameter 'adev' description in 'amdgpu_ib_schedule'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:168: warning: Function parameter or member 'max_dw' not described in 'amdgpu_ring_init'
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:168: warning: Excess function parameter 'max_ndw' description in 'amdgpu_ring_init'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes >200 warnings.
Fixes the following W=1 kernel build warning(s):
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:31:
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:126:22: warning: ‘DP_DVI_CONVERTER_ID_5’ defined but not used [-Wunused-const-variable=]
126 | static const uint8_t DP_DVI_CONVERTER_ID_5[] = "3393N2";
| ^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:125:22: warning: ‘DP_DVI_CONVERTER_ID_4’ defined but not used [-Wunused-const-variable=]
125 | static const uint8_t DP_DVI_CONVERTER_ID_4[] = "m2DVIa";
| ^~~~~~~~~~~~~~~~~~~~~
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes >200 warnings.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:123:22: warning: ‘DP_VGA_LVDS_CONVERTER_ID_3’ defined but not used [-Wunused-const-variable=]
123 | static const uint8_t DP_VGA_LVDS_CONVERTER_ID_3[] = "dnomlA";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:121:22: warning: ‘DP_VGA_LVDS_CONVERTER_ID_2’ defined but not used [-Wunused-const-variable=]
121 | static const uint8_t DP_VGA_LVDS_CONVERTER_ID_2[] = "sivarT";
NB: Repeated ~100 times - snipped for brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes nearly 400 warnings!
These structures are too widely used in too many varying
configurations to be split-up into different headers or moved into
source files.
Instead, we'll mark them as __maybe_unused which tells the compiler
that we're aware they're being included into source files which do not
make use of them - but we've looked into it, and it's okay.
Let's tidy-up whilst were here. Just alignment stuff.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:144:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
144 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x00000000, 0x00000014, 0x00000D20, 0x00010400, 0x0241B000 } },
| ^~~~~~~~~~
NB: Snipped for brevity
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the FP handling to avoid nested calls.
The nested calls cause the warning below
WARNING: CPU: 3 PID: 384 at arch/x86/kernel/fpu/core.c:129 kernel_fpu_begin
Fixes: 582e2ce5b4 ("drm/amdgpu/display: FP fixes for DCN3.x (v4)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used at runtime to release the table
mapping which can prevent the memory leak.
In kfd_create_crat_image_acpi(), crat_table is copied to pcrat_image,
and in kfd_create_vcrat_image_cpu(), the acpi_table is only used to
get the OEM information, so those two table mappings need to be released
after using it.
Fixes: 174de876d6 ("drm/amdkfd: Group up CRAT related functions")
Fixes: 520b8fb755 ("drm/amdkfd: Add topology support for CPUs")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the ignore_crat is set to non-zero value, it's no point getting
the CRAT table, so just move the ignore_crat check before we get the
CRAT table.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per PMFW 59.13.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx_state_change_set() funtion can support set GFX power
change status to D0/D3.
v2: make sure to register callback (Alex)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Need skip the RLC/CP/GFX disable for let GFXOFF enter during suspend period.
- For s0i3 suspend only need suspend DCE and each IP interrupt.
- Before VBIOS POSTed check and atom HW INT need set the GPU power status change
to D0 in the resume period, otherwise the HW will be mess up and see the SDMA hang.
- Need handle the GPU reset path during amdgpu device suspend.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new amdgpu_gfx_state_change_set() funtion can support set GFX power
change status to D0/D3.
v2: squash in warning fix (Alex)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:685: warning: Function parameter or member 'backoff' not described in 'amdgpu_cs_parser_fini'
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:1655: warning: Function parameter or member 'map' not described in 'amdgpu_cs_find_mapping'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
