This patch enables TID RDMA READ protocol by converting a qualified
RDMA READ request into a TID RDMA READ request internally:
(1) The TID RDMA capability must be enabled;
(2) The request must start on a 4K page boundary and all receiving
buffers must start on 4K page boundaries;
(3) The request length must be a multiple of 4K and must be larger or
equal to 256K. Each receiving buffer length must be a multiple of 4K.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This locking mechanism is designed to provent vavious memory corruption
scenarios from occurring when requests are pipelined, especially when
RDMA READ/WRITE requests are interleaved with TID RDMA READ/WRITE
requests:
1. READ-AFTER-READ;
2. READ-AFTER-WRITE;
3. WRITE-AFTER-READ;
When memory corruption is likely, a request will be held back until
previous requests have been completed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch integrates the TID RDMA READ protocol into the IB RC protocol.
This protocol is an end-to-end protocol between the hfi1 drivers on two
OPA nodes that converts a qualified RDMA READ request into a TID RDMA
READ request to avoid data copying on the requester side. The following
codes are added in this patch:
- Send the TID RDMA READ request;
- Complete the TID RDMA READ send request;
- Send the TID RDMA READ response;
- Complete the TID RDMA READ request;
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds functions to retry TID RDMA READ request. Since TID RDMA
READ request could be retried from any segment boundary, it requires
a number of tracking fields in various structures and those fields
should be reset properly. The qp->s_num_rd_atomic field is reset before
retry and therefore should be incremented for each new or retried
RDMA READ or atomic request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit adds the TID RDMA READ pointers to the receiving opcode
handlers. It also adds TID RDMA READ header sizes to header size table.
A function to print the RHF EFLAGS errors is created so that it can be
shared by both IB and TID RDMA receiving functions.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA READ response. The TID
resource information in the KDETH packet header will direct the hardware
to deliver the packet payload to the user buffer automatically and the
software will handle the packet header for the last packet of a segment
as all other packet headers are suppressed by default. The TID entries
will be freed when all packets for a segment have been received. This
patch also adds the functions to handle KDETH eflag errors, including
flow sequence and generation errors, when a TID RDMA READ response
packet is received . The flow sequence error can be recovered by software
checking of the flow sequence and will disappear when the hardware flow
is programmed with a new generation number.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the function to build TID RDMA READ response packet.
The previously received TID resource information will be used to
build the KDETH packet, which will direct the delivery of packet payload
by hardware.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA READ request. The TID
resource information will be stored and tracked. Duplicate request
will also be handled properly.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All TID RDMA packets are in KDETH packet format and therefore the
PbcInsertHcrc must be set properly before sending the packet to
hardware. Otherwise, the packets will be dropped by the receiver.
By default, HCRC is not inserted for 9B packets without KDETH, and
this patch adds that back for TID RDMA packets.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the helper functions to build the TID RDMA READ request
on the requester side. The key is to allocate TID resources (TID flow
and TID entries) and send the resource information to the responder side
along with the read request. Since the TID resources are limited, each
TID RDMA READ request has to be split into segments with a default
segment size of 256K. A software flow is allocated to track the data
transaction for each segment. The work request opcode, packet opcode, and
packet formats for TID RDMA READ protocol are also defined in this patch.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the static trace for the flow and TID management
functions to help debugging in the filed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the counter n_tidwait to count the number of times the
TID resource allocator has to wait for TID resources.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
TID entries are used by hfi1 hardware to receive data payload from
incoming packets directly into a user buffer and thus avoid data copying
by software. This patch implements the functions for TID allocation,
freeing, and programming TID RcvArray entries in hardware for kernel
clients. TID entries are managed via lists of TID groups similar to PSM.
Furthermore, to track TID resource allocation for each request, software
flows are also allocated and freed as needed. Since software flows
consume large amount of memory for tracking TID allocation and freeing,
it is generally desirable to allocate them dynamically in the send queue
and only for TID RDMA requests, but pre-allocate them for receive queue
because the send queue could have thousands of entries while the receive
queue has only a limited number of entries.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hfi1 hardware flow is a hardware flow-control mechanism for a KDETH
data packet that is received on a hfi1 port. It validates the packet by
checking both the generation and sequence. Each QP that uses the TID RDMA
mechanism will allocate a hardware flow from its receiving context for
any incoming KDETH data packets.
This patch implements:
(1) a function to allocate hardware flow
(2) a function to free hardware flow
(3) a function to initialize hardware flow generation for a receiving
context
(4) a wait mechanism if the hardware flow is not available
(4) a function to remove the qp from the wait queue for hardware flow
when the qp is reset or destroyed.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch moves some RC helper functions into a header file so that
they can be called from both RC and TID RDMA functions. In addition,
a common function for rewinding a request is created in rdmavt so that
it can be shared between qib and hfi1 driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that sparse reports the following for the mlx5 driver:
drivers/infiniband/hw/mlx5/qp.c:2671:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2671:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2671:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2679:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2679:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2679:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2680:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2680:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2680:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2684:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2684:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2684:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: incorrect type in argument 1 (different base types)
drivers/infiniband/hw/mlx5/qp.c:2686:28: expected unsigned int [usertype] val
drivers/infiniband/hw/mlx5/qp.c:2686:28: got restricted __be32 [usertype]
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
This patch does not change any functionality.
Fixes: a60109dc9a ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
So future additions to that struct get initialized by default.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging when sending doorbell
during reset. We can fix it by prohibiting doorbell during reset.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset. We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the reset process, the hns3 NIC driver notifies the RoCE driver to
perform reset related processing by calling the .reset_notify() interface
registered by the RoCE driver in hip08 SoC.
In the current version, if a reset occurs simultaneously during the
execution of rmmod or insmod ko, there may be Oops error as below:
Internal error: Oops: 86000007 [#1] PREEMPT SMP
Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2]
CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G O 4.19.0-ge00d540 #1
Hardware name: Huawei Technologies Co., Ltd.
Workqueue: events hclge_reset_service_task [hclge]
pstate: 60c00009 (nZCv daif +PAN +UAO)
pc : 0xffff00000100b0b8
lr : 0xffff00000100aea0
sp : ffff000009afbab0
x29: ffff000009afbab0 x28: 0000000000000800
x27: 0000000000007ff0 x26: ffff80002f90c004
x25: 00000000000007ff x24: ffff000008f97000
x23: ffff80003efee0a8 x22: 0000000000001000
x21: ffff80002f917ff0 x20: ffff8000286ea070
x19: 0000000000000800 x18: 0000000000000400
x17: 00000000c4d3225d x16: 00000000000021b8
x15: 0000000000000400 x14: 0000000000000400
x13: 0000000000000000 x12: ffff80003fac6e30
x11: 0000800036303000 x10: 0000000000000001
x9 : 0000000000000000 x8 : ffff80003016d000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000000
x3 : 0000000000000004 x2 : 00000000000007ff
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9)
Call trace:
0xffff00000100b0b8
0xffff00000100b3a0
hns_roce_init+0x624/0xc88 [hns_roce]
0xffff000001002df8
0xffff000001006960
hclge_notify_roce_client+0x74/0xe0 [hclge]
hclge_reset_service_task+0xa58/0xbc0 [hclge]
process_one_work+0x1e4/0x458
worker_thread+0x40/0x450
kthread+0x12c/0x130
ret_from_fork+0x10/0x18
Code: bad PC value
In the reset process, we will release the resources firstly, and after the
hardware reset is completed, we will reapply resources and reconfigure the
hardware.
We can solve this problem by modifying both the NIC and the RoCE
driver. We can modify the concurrent processing in the NIC driver to avoid
calling the .reset_notify and .uninit_instance ops at the same time. And
we need to modify the RoCE driver to record the reset stage and the
driver's init/uninit state, and check the state in the .reset_notify,
.init_instance. and uninit_instance functions to avoid NULL pointer
operation.
Fixes: cb7a94c9c8 ("RDMA/hns: Add reset process for RoCE in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes the following sparse warnings:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5822:5: warning:
symbol 'hns_roce_v2_query_srq' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:158:6: warning:
symbol 'hns_roce_srq_free' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:81:5: warning:
symbol 'hns_roce_srq_alloc' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
5Xv88is=
=dVd1
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc5' into rdma.git for-next
Linux 5.0-rc5
Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.
Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add changes to the WQE page-fault handler to
1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure
The rest is handled as for regular RQ WQE.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.
Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the function mlx5_ib_mr_responder_pfault_handler()
1. The parameter wqe is used as read-only so there is no need to pass it
by reference.
2. Remove the unused argument pfault from list of arguments.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.
While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.
Fixes: 032080ab43 ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_qp_flow_control_init':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4384:33: warning:
variable 'rst' set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the static trace to the OPFN code and moves tid related
static trace code into a new header file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN parameter negotiation allows a pair of connected RC QPs to exchange
a set of parameters in succession. This negotiation does not commence
till the first ULP request. Because OPFN operations are operations
private to the driver, they do not generate user completions or put the
QP into error when they run out of retries. This patch integrates the
OPFN protocol into the transactions of an RC QP.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The OPFN protocol uses the COMPARE_SWAP request to exchange data
between the requester and the responder and therefore needs to
be stored in the QP's s_ack_queue when the request is received
on the responder side. However, because the user does not know
anything about the OPFN protocol, this extra entry in the
queue cannot be advertised to the user. This patch adds an extra
entry in a QP's s_ack_queue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN allows a pair of connected RC QPs to exchange a set of parameters
in succession. The parameter exchange itself is done using the IB compare
and swap request with a special virtual address. The request is triggered
using a reserved IB work request opcode. This patch implements the OPFN
interface to initialize, start, process, and reset the OPFN request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the OPFN helper functions to initialize, encode, decode,
and reset OPFN parameters for the TID RDMA feature.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN (Omni Path Feature Negotiation) support discovery allows a RC QP to
announce that it supports OPFN and also discover if OPFN is supported by
the peer QP. OPFN parameter negotiation is skipped unless OPFN support is
first discovered. OPFN support is announced by claiming what was
the reserved bit in dword 1 of OmniPath modified base transport header
in requests and responses.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As preparation to hide rdma_restrack_root, refactor the code to use the
ops structure instead of a special callback which is hidden in
rdma_restrack_root.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a given netdev of the GID entry is macvlan netdevice, and if the
lower netdevice is vlan device, GID entry for macvlan based IP address
needs to inherit the vlan of the lower netdevice.
Therefore, attempt to find out if the lower device exist and if so, if
it is vlan device and setup the vlan tag correctly.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lack of mandatory verbs no longer fail device registration, the device
will be marked as a non-kverbs provider.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Tested-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.
Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove 'del_mkey' variable that is set but not used.
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function mlx5_ib_stage_odp_cleanup() is only used in main.c
Fixes: d5d284b829 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several locations for manipulating sges use an open coded sequence
that is covered by helper functions.
Use the appropriate helper functions.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sge sizing is done in several places using an open coded method.
This can cause maintenance issues. The open coded method is
encapsulated in a helper routine. The helper was introduced with
commit:
1198fcea8a ("IB/hfi1, rdmavt: Move SGE state helper routines into
rdmavt")
Update all call sites that have the open coded path with the helper
routine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the driver to use the new device capability to report 64-bit UAR
PFNs.
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas says:
Enable DEVX asynchronous query commands
This series enables querying a DEVX object in an asynchronous mode.
The userspace application won't block when calling the firmware and it will be
able to get the response back once that it will be ready.
To enable the above functionality:
- DEVX asynchronous command completion FD object was introduced.
- The applicable file operations were implemented to enable using it by
the user application.
- Query asynchronous method was added to the DEVX object, it will call the
firmware asynchronously and manages the response on the given input FD.
- Hot unplug support was added for the FD to work properly upon
unbind/disassociate.
- mlx5 core fence for asynchronous commands was implemented and used to
prevent racing upon unbind/disassociate.
This branch is based on mlx5-next & v5.0-rc2 due to dependencies, from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
* branch 'devx-async':
IB/mlx5: Implement DEVX hot unplug for async command FD
IB/mlx5: Implement the file ops of DEVX async command FD
IB/mlx5: Introduce async DEVX obj query API
IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement DEVX hot unplug for the async command FD.
This is done by managing a list of the inflight commands and wait until
all launched work is completed as part of
devx_hot_unplug_async_cmd_event_file.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement the file ops of the DEVX async command FD, this enables using
the FD for reading the events and manage other options on the FD.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce async DEVX obj query API to get the command response back to
user space once it's ready without blocking when calling the firmware.
The event's data includes a header with some meta data then the firmware
output command data.
The header includes:
- The input 'wr_id' to let application recognizing the response.
The input FD attribute is used to have the event data ready on.
Downstream patches from this series will implement the file ops to let
application read it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD and its initial implementation.
This object is from type class FD and will be used to read DEVX async
commands completion.
The core layer should allow the driver to set object from type FD in a
safe mode, this option was added with a matching comment in place.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The intention of the flow_is_supported was to disable the entire tree and
methods that allow raw flow creation, but the grammar syntax has this
disable the entire UVERBS_FLOW object. Since the method requires a
MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is
automatically disabled when matchers are disabled.
This restores the ability to create flow steering rules on representors
via regular verbs.
Fixes: a1462351b5 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hns_roce_ib_create_srq_resp is used to interact with the user for
data, this was open coded to use a u32 directly, instead use a properly
sized structure.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Similar to the core change commit 5f1d43de54 ("IB/core: disable memory
registration of filesystem-dax vmas")
PSM should be prevented from using filesystem DAX pages.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds qpc timer and cqc timer allocation support for hardware
timeout retransmission in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context clear support for DCQCN in kernel space
driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context allocation and initialization support for
DCQCN in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A sub-range in ODP implicit MR should take its write permission from the
MR and not be set always to allow.
Fixes: d07d1d70ce ("IB/umem: Update on demand page (ODP) support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no reason for this __GFP_NOFAIL, none of the other routines in
this file use it, and there is an error unwind here. NOFAIL should be
reserved for special cases, not used by network drivers.
Fixes: 6a0b6174d3 ("rdma/cxgb4: Add support for kernel mode SRQ's")
Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that sparse complains about missing function
declarations.
Fixes: c9990ab39b ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The macro was just making things harder to follow, and audit, so remove
it and call debugfs_create_file() directly. Also, the macro did not
need to warn about the call failing as no one should ever care about any
debugfs functions failing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.
The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Two flow specifications can set the ip protocol field in
the flow table entry:
1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly.
2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users
who want to receive specific L4 packets.
We need to avoid overriding of the ip_protocol with zeros,
in case that the user first put the L4 specification and
only then the L3.
Fixes: ca0d475385 ('IB/mlx5: Add support in TOS and protocol to flow steering')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support for ODP for DEVX indirection mkey, it includes:
- Recognizing its type as part of the radix tree lookup.
- Use similar flow as done for the MW MKEY type.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Manage indirection mkey upon DEVX flow to support ODP.
To support a page fault event on the indirection mkey it needs to be part
of the device mkey radix tree.
Both the creation and the deletion flows for a DEVX object which is
indirection mkey were adapted to handle that.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Once an indirection MKEY is created umem valid bit shouldn't be set as
this MKEY doesn't really hold a umem.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
AEQ overflow will be reported by hardware when too many asynchronous
events occurred but not be handled in time. Normally, AEQ overflow error
is not easy to occur. Once happened, we have to do physical function reset
to recover. PF reset is implemented in two steps. Firstly, set reset
level with ae_dev->ops->set_default_reset_request. Secondly, run reset
with ae_dev->ops->reset_event.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Work must hold a kref on the ib_device otherwise the dev pointer can
become free before the work runs. This can happen because the work is
being pushed onto the system work queue which is not flushed during driver
unregister.
Remove the bogus use of 'reg_state':
- While in uverbs the reg_state is guaranteed to always be
REGISTERED
- Testing reg_state with no locking is bogus. Use ib_device_try_get()
to get back into a region that prevents unregistration.
For now continue with a flow that is similar to the existing code.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Applications that use the stack for execution purposes cause userspace PSM
jobs to fail during mmap().
Both Fortran (non-standard format parsing) and C (callback functions
located in the stack) applications can be written such that stack
execution is required. The linker notes this via the gnu_stack ELF flag.
This causes READ_IMPLIES_EXEC to be set which forces all PROT_READ mmaps
to have PROT_EXEC for the process.
Checking for VM_EXEC bit and failing the request with EPERM is overly
conservative and will break any PSM application using executable stacks.
Cc: <stable@vger.kernel.org> #v4.14+
Fixes: 1222026764 ("IB/hfi: Protect against writable mmap")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The work completion length for a receiving a UD send with immediate is
short by 4 bytes causing application using this opcode to fail.
The UD receive logic incorrectly subtracts 4 bytes for immediate
value. These bytes are already included in header length and are used to
calculate header/payload split, so the result is these 4 bytes are
subtracted twice, once when the header length subtracted from the overall
length and once again in the UD opcode specific path.
Remove the extra subtraction when handling the opcode.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the flags verification was added two flags were missed from the
check:
* MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
* MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
This causes user applications that were using these flags to break.
Fixes: 2e43bb31b8 ("IB/mlx5: Verify that driver supports user flags")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_srq':
drivers/infiniband/hw/qedr/verbs.c:1436:22: warning:
variable 'ib_ctx' set but not used [-Wunused-but-set-variable]
drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_user_qp':
drivers/infiniband/hw/qedr/verbs.c:1701:22: warning:
variable 'ib_ctx' set but not used [-Wunused-but-set-variable]
Fixes: b0ea0fa543 ("IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udata")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When flush cqe, it needs to get the pointer of rq and sq from db address
space of user and update it into qp context by modified qp. if rq does not
exist, it will not get the value from db address space of user.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Not much so far, but I'm feeling like the 2nd PR -rc will be larger than
this. We have the usual batch of bugs and two fixes to code merged this cycle.
- Restore valgrind support for the ioctl verbs interface merged this window,
and fix a missed error code on an error path from that conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey
-----BEGIN PGP SIGNATURE-----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=ymZq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes frfom Jason Gunthorpe:
"Not much so far. We have the usual batch of bugs and two fixes to code
merged this cycle:
- Restore valgrind support for the ioctl verbs interface merged this
window, and fix a missed error code on an error path from that
conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT
RDMA/mthca: Clear QP objects during their allocation
RDMA/vmw_pvrdma: Return the correct opcode when creating WR
RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id type
RDMA/nldev: Don't expose unsafe global rkey to regular user
RDMA/uverbs: Fix post send success return value in case of error
Replace kzalloc() function with its 2-factor argument form, kcalloc().
This patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a, b, gfp)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The patch 944661dd97: "RDMA/iw_cxgb4: atomically lookup ep and get a
reference" from May 6, 2016, leads to the following Smatch complaint:
drivers/infiniband/hw/cxgb4/cm.c:2953 terminate()
error: we previously assumed 'ep' could be null (see line 2945)
Fixes: 944661dd97 ("RDMA/iw_cxgb4: atomically lookup ep and get a reference")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Management Datagram Interface (MAD) is applicable
only when physical port is Infiniband. It makes MAD
command logic to be completely unrelated to eth/core
parts of mlx5.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
This is from static analysis not from testing. Depending on the value
of rcfw->cmdq_depth, then this might not cause an issue at runtime.
The BITS_TO_LONGS() macro tells us how many longs it take to hold a
bitmap. In other words, it divides by the number if bits per long and
rounds up. Then we want to take that number and multiple by
sizeof(long) to get the number of bytes to allocate.
The code here does the multiplication first so the rounding up is done
in the wrong place. So imagine we want to allocate 1 bit, then
"(1 * 8) / 64 = 1" when we round up. But it should be
"(1 / 64) * 8 = 8". In other words, because of the rounding difference
we might allocate up to "sizeof(long) - 1" bytes fewer than intended.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce and use rdma_device_to_ibdev() API for those drivers which are
registering one sysfs group and also use in ib_core.
In subsequent patch, device->provider_ibdev one-to-one mapping is no
longer holds true during accessing sysfs entries.
Therefore, introduce an API rdma_device_to_ibdev() that provides such
information.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.
Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CTX objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CQ objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that PD objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested
for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN.
Fixes: a7efd7773e ("qedr: Add support for PD,PKEY and CQ verbs")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pkey table size is one element, index should be tested for > 0 instead
of > 1.
Fixes: fe2caefcdf ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pkey table size is one element, index should be tested for > 0 instead
of > 1.
Fixes: e3cf00d0a8 ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_umem_get() can only be called in a method callback, which always has a
udata parameter. This allows ib_umem_get() to derive the ucontext pointer
directly from the udata without requiring the drivers to find it in some
way or another.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
The next patch will add dependency from ib_umem_get in to ib_uverbs so
move the required ib_umem_xxx functionality to it's correct module -
ib_uverbs - and avoid circular dependecy from the form of ib_core ->
ib_uverbs -> ib_core in depmod.
Since this now requires all drivers to be build modular if uverbs is
modular, hoist the test a couple drivers had into the main kconfig and
apply it to all drivers uniformly.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device
opcodes explicitly.
Reported-by: Ruishuang Wang <ruishuangw@vmware.com>
Fixes: 9a59739bd0 ("IB/rxe: Revise the ib_wr_opcode enum")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert various places to more readable code, which embeds
CONFIG_INFINIBAND_ON_DEMAND_PAGING into the code flow.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Consolidate various checks if MR is ODP backed to one simple helper and
update call sites to use it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Device capability bits are exposing what specific device supports from HW
perspective. Those bits are not dependent on kernel configurations and
RDMA/core should ensure that proper interfaces to users will be disabled
if CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set.
Fixes: f4056bfd8c ("IB/core: Add on demand paging caps to ib_uverbs_ex_query_device")
Fixes: 8cdd312cfe ("IB/mlx5: Implement the ODP capability query verb")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
CONFIG_INFINIBAND_ON_DEMAND_PAGING is used in general structures to
micro-optimize the memory footprint. Remove it, so it will allow us to
simplify various ODP device flows.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modify the pbl ba page size to 16K for in order to support 4G MR size.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to IB protocol, local ACK timeout shall be a 5 bit
value. Currently, hip08 could not support the possible max value 31. Fail
the request in this case.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some application scenario, the user could not have receive queue when
run rdma write or read operation.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When flush cqe with srq, the driver disable to update the rq head pointer
into the hardware.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Inorder to optimize the NVMEoF read IOPs, iw_cxgb4 posts a FW Write with
Completion WQE that combines an RDMA Write WR and the subsequent RDMA Send
with Invalidate WR.
This patch is an extension to it, where it posts a Write with completion
for RDMA WRITE WR + RDMA SEND WR combination as well.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop series
-----BEGIN PGP SIGNATURE-----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=REsM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop
series"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
infiniband/qedr: Potential null ptr dereference of qp
infiniband: bnxt_re: qplib: Check the return value of send_message
IB/ipoib: drop useless LIST_HEAD
IB/core: Add advise_mr to the list of known ops
Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads"
IB/mlx5: Allow XRC INI usage via verbs in DEVX context
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
idr_find() may fail and return a NULL pointer. The fix checks the return
value of the function and returns an error in case of NULL.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this error to the callers.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Longer term testing shows this patch didn't play well with MR cache and
caused to call traces during remove_mkeys().
This reverts commit bb7e22a8ab.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From device point of view both XRC target and initiator are XRC transport
type.
Fix to use the expected UID as was handled for the XRC target case to
allow its usage via verbs in DEVX context.
Fixes: 5aa3771ded ("IB/mlx5: Allow XRC usage via verbs in DEVX context")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting to
get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5,
qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use write()
for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into
a big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and sysfs
files
- First steps toward removing 'uobject' from the view of the drivers
-----BEGIN PGP SIGNATURE-----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=T0p1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting
to get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
mlx5, qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use
write() for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into a
big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page
tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and
sysfs files
- First steps toward removing 'uobject' from the view of the drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
RDMA/srpt: Use kmem_cache_free() instead of kfree()
RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
IB/uverbs: Signedness bug in UVERBS_HANDLER()
IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
IB/umad: Start using dev_groups of class
IB/umad: Use class_groups and let core create class file
IB/umad: Refactor code to use cdev_device_add()
IB/umad: Avoid destroying device while it is accessed
IB/umad: Simplify and avoid dynamic allocation of class
IB/mlx5: Fix wrong error unwind
IB/mlx4: Remove set but not used variable 'pd'
RDMA/iwcm: Don't copy past the end of dev_name() string
IB/mlx5: Fix long EEH recover time with NVMe offloads
IB/mlx5: Simplify netdev unbinding
IB/core: Move query port to ioctl
RDMA/nldev: Expose port_cap_flags2
IB/core: uverbs copy to struct or zero helper
IB/rxe: Reuse code which sets port state
IB/rxe: Make counters thread safe
IB/mlx5: Use the correct commands for UMEM and UCTX allocation
...
Patch series "mmu notifier contextual informations", v2.
This patchset adds contextual information, why an invalidation is
happening, to mmu notifier callback. This is necessary for user of mmu
notifier that wish to maintains their own data structure without having to
add new fields to struct vm_area_struct (vma).
For instance device can have they own page table that mirror the process
address space. When a vma is unmap (munmap() syscall) the device driver
can free the device page table for the range.
Today we do not have any information on why a mmu notifier call back is
happening and thus device driver have to assume that it is always an
munmap(). This is inefficient at it means that it needs to re-allocate
device page table on next page fault and rebuild the whole device driver
data structure for the range.
Other use case beside munmap() also exist, for instance it is pointless
for device driver to invalidate the device page table when the
invalidation is for the soft dirtyness tracking. Or device driver can
optimize away mprotect() that change the page table permission access for
the range.
This patchset enables all this optimizations for device drivers. I do not
include any of those in this series but another patchset I am posting will
leverage this.
The patchset is pretty simple from a code point of view. The first two
patches consolidate all mmu notifier arguments into a struct so that it is
easier to add/change arguments. The last patch adds the contextual
information (munmap, protection, soft dirty, clear, ...).
This patch (of 3):
To avoid having to change many callback definition everytime we want to
add a parameter use a structure to group all parameters for the
mmu_notifier invalidate_range_start/end callback. No functional changes
with this patch.
[akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc]
Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband]
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "num_actions" variable needs to be signed for the error handling to
work. The maximum number of actions is less than 256 so int type is large
enough for that.
Fixes: cbfdd442c4 ("IB/uverbs: Add helper to get array size from ptr attribute")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The per-port Q counter is some kernel resource and as such may be used by
few UID(s) upon DEVX usage.
To enable using it for QP/RQ when DEVX context is used need to allocate it
with a sharing mode indication to let firmware allows its usage.
The UID = 0xffff was chosen to mark it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The destroy_workqueue on error unwind is missing, and the code jumps to
the wrong exit label.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/mlx4/qp.c: In function '_mlx4_ib_destroy_qp':
drivers/infiniband/hw/mlx4/qp.c:1612:22: warning:
variable 'pd' set but not used [-Wunused-but-set-variable]
Fixes: e00b64f7c5 ("RDMA: Cleanup undesired pd->uobject usage")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On NVMe offloads connection with many IO queues, EEH takes long time to
recover. The culprit is the synchronize_srcu in the destroy_mkey. The
solution is to use synchronize_srcu only for ODP mkey.
Fixes: b4cfe447d4 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When dealing with netdev unregister events, we just need to know that this
is our currently bounded netdev. There's no need to do any further
checks/queries.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During testing the command format was changed to close a security
hole. Revise the driver to use the command format that will actually be
supported in GA firmware.
Both the UMEM and UCTX are intended only for use by the kernel and cannot
be executed using a general command.
Since the UMEM and CTX are not part of the general object the caps bits
were moved to be some log_xxx location in the general HCA caps.
The firmware code was adapted as well to match the above.
Fixes: a8b92ca1b0 ("IB/mlx5: Introduce DEVX")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use uid as part of alloc/dealloc transport domain to let firmware manages
the resources correctly.
Fixes: d2d19121ae ("IB/mlx5: Set uid as part of TD commands")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 updates taken for dependencies on following patches.
* branche 'mlx5-next': (23 commits)
IB/mlx5: Introduce uid as part of alloc/dealloc transport domain
net/mlx5: Add shared Q counter bits
net/mlx5: Continue driver initialization despite debugfs failure
net/mlx5: Fold the modify lag code into function
net/mlx5: Add lag affinity info to log
net/mlx5: Split the activate lag function into two routines
net/mlx5: E-Switch, Introduce flow counter affinity
IB/mlx5: Unify e-switch representors load approach between uplink and VFs
net/mlx5: Use lowercase 'X' for hex values
net/mlx5: Remove duplicated include from eswitch.c
net/mlx5: Remove the get protocol device interface entry
net/mlx5: Support extended destination format in flow steering command
net/mlx5: E-Switch, Change vhca id valid bool field to bit flag
net/mlx5: Introduce extended destination fields
net/mlx5: Revise gre and nvgre key formats
net/mlx5: Add monitor commands layout and event data
net/mlx5: Add support for plugged-disabled cable status in PME
net/mlx5: Add support for PCIe power slot exceeded error in PME
net/mlx5: Rework handling of port module events
net/mlx5: Move flow counters data structures from flow steering header
...
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
Increasing the depth of control path command queue to 8K entries to handle
burst of commands. This feature needs support from FW and the driver/fw
compatibility is checked from the interface version number.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Get HWRM interface major, minor, build and patch version from FW for
checking the FW/Driver compatibility.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acquiring the rtnl lock while holding usdev_lock could result in a
deadlock.
For example:
usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock)
| ib_get_eth_speed()
| rtnl_lock()
rtnl_lock()
| usnic_ib_netdevice_event()
| mutex_lock(&us_ibdev->usdev_lock)
This commit moves the usdev_lock acquisition after the rtnl lock has been
released.
This is safe to do because usdev_lock is not protecting anything being
accessed in ib_get_eth_speed(). Hence, the correct order of holding locks
(rtnl -> usdev_lock) is not violated.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a 'flags' field to destroy address handle callback and add a
flag that marks whether the callback is executed in an atomic context or
not.
This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.
This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not enabled, we were getting
build failures for defined but not used code. Fix that.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Drivers should be using udata to determine if a method is invoked from
user space or kernel space. A pd does not necessarily say a different
objects is kernel or user.
Transforming the tests to use udata eliminates a large number of uobject
references from the drivers.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The verb advise_mr() is used to give advice to the kernel about an address
range that belongs to a MR. Implement the verb and register it on the
device. The current implementation supports the only known advice to date,
prefetch.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the parser of an ioctl command has the knowledge that a ptr attribute
in a bundle represents an array of structures, it is useful for it to know
the number of elements in the array. This is done by dividing the
attribute length with the element size.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The macro MLX4_IB_SQ_HEADROOM calculates the spare room needed to be
left. Use it instead of hard-coding the HW prefetch size.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function accidentally returns success on this error path.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We accidentally return success on this error path.
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The initialization of the ib_device_ops was dropped by mistake when
rebasing the ib_device_ops series, this patch fixes that.
Fixes: 15644f57cb ("RDMA/i40iw: Initialize ib_device_ops struct")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Handle atomic was left as unimplemented from 2013, remove the code till
this part will be developed.
Remove the dead code by simplifying SW completion logic which is supposed
to be the same for send and receive paths.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
With the introduction of SR-IOV LAG, checking whether LAG is active
is no longer good enough, since RoCE and SR-IOV LAG each entails
different behavior by both the core and infiniband drivers.
This patch introduces facilities to discern LAG type, in addition to
mlx5_lag_is_active(). These are implemented in such a way as to allow
more complex mode combinations in the future.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev
conflicts.
Highlights:
1) Lag refactroing and flow counter affinity bits.
2) mlx5 core cleanups
By Roi Dayan (2) and others
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Fold the modify lag code into function
net/mlx5: Add lag affinity info to log
net/mlx5: Split the activate lag function into two routines
net/mlx5: E-Switch, Introduce flow counter affinity
IB/mlx5: Unify e-switch representors load approach between uplink and VFs
net/mlx5: Use lowercase 'X' for hex values
net/mlx5: Remove duplicated include from eswitch.c
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When in switchdev mode and the add function is called by the core
level driver, make sure we only register the callbacks, but don't
create the mlx5 IB device or initialize anything. With this change
all the IB devices in switchdev mode are created only once the load
callback is invoked by the e-switch core sub-module. This follows
the design paradigm under which the all the Eth representors must
be loaded before any of IB reprs is loaded.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
