Besides the fact that COMMON_CLK selects CLKDEV_LOOKUP, the latter
is going to be removed from clock framework.
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We may free ACPI device resources immediately after use.
Refactor skl_int3472_parse_crs() accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a problem in mapping CPU to a PCI device instance when the
bus numbers are reused in different packages. This was observed on
some Sapphire Rapids systems.
The current implementation reads bus number assigned to a CPU package
via MSR 0x128. This allows to establish relationship between a CPU
and a PCI device. This allows to update power related parameters to a
MMIO offset in a PCI device space which is unique to a CPU. But if
two packages uses same bus number then this mapping will not be unique.
When bus number is reused, PCI device will use different domain number
or segment number. So we need to be aware of this domain information
while matching CPU to PCI bus number. This domain information is not
available via any MSR. So need to use ACPI numa node information.
There is an interface already available in the Linux to read numa
node for a CPU and a PCI device. This change uses this interface
to check the numa node of a match PCI device with bus number.
If the bus number and numa node matches with the CPU's assigned
bus number and numa node, the matched PCI device instance will be
returned to the caller.
It is possible that before Sapphire Rapids, the numa node is not
defined for the Speed Select PCI device in some OEM systems. In this
case to restore old behavior, return the last matched PCI device
for domain 0 unlsess there are more than one matches.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210616221329.1909276-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It was observed that some of the high performance benchmarks are spending
more time in kernel depending on which CPU package they are executing.
The difference is significant and benchmark scores varies more than 10%.
These benchmarks adjust class of service to improve thread performance
which run in parallel. This class of service change causes access to
MMIO region of Intel Speed Select PCI devices depending on the CPU
package they are executing.
This mapping from CPU to PCI device instance uses a standard Linux PCI
interface "pci_get_domain_bus_and_slot()". This function does a linear
search to get to a PCI device. Since these platforms have 100+ PCI
devices, this search can be expensive in fast path for benchmarks.
Since the device and function of PCI device is fixed for Intel
Speed Select PCI devices, the CPU to PCI device information can be cached
at the same time when bus number for the CPU is read. In this way during
runtime the cached information can be used. This improves performance
of these benchmarks significantly.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210616221329.1909276-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI devices with _HID INT3472 are currently matched to the tps68470
driver, however this does not cover all situations in which that _HID
occurs. We've encountered three possibilities:
1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing
a physical TPS68470 device) that requires a GPIO and OpRegion driver
2. On devices designed for Windows, an ACPI device with _HID INT3472
(again representing a physical TPS68470 device) which requires GPIO,
Clock and Regulator drivers.
3. On other devices designed for Windows, an ACPI device with _HID
INT3472 which does **not** represent a physical TPS68470, and is instead
used as a dummy device to group some system GPIO lines which are meant
to be consumed by the sensor that is dependent on this entry.
This commit adds a new module, registering a platform driver to deal
with the 3rd scenario plus an i2c driver to deal with #1 and #2, by
querying the CLDB buffer found against INT3472 entries to determine
which is most appropriate.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-6-djrscally@gmail.com
[hdegoede@redhat.com Make skl_int3472_tps68470_calc_type() static]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCng30UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yEhggAmYRz34z7y0jQCk2gCTnijjHjvr+0
Af7+8JfpMCiXilzzraOe/3cVDY/labsfS7jvaPrSKw81EG1n/WjE9ZyXEHl5vTvw
sytdXGHzoei/RduSiWDnYZgjfWNpfDIuSbwWcFMtPuCoELdW6O7w0oUyKyiMP6Gp
CCEHsJuHGh6ErsVDdYfp+oDhF3H3WTeJxKDAvi3jp73bv7g3HgCZWWz3YUL1MZoK
twn/t9EWYQAT6bKZ3NeAUW8STuqVg/eri2oncsAk9pnQw8BqV9orfyosROcOh2nH
PdqNNe3WWuuoNq2IZ4PNOYQ0uwDrntLcVGA0QdOF4YsWQezqQXdHkltPCg==
=DG5t
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans
Signed tag for the immutable platform-drivers-x86-goodix branch for merging into the input subsystem.
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1623811809-65099-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If length equals 0 then reading buf[length-1] will read before the start
of the buffer.
Avoid this by moving the length == 0 check up.
Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-2-hdegoede@redhat.com
tlmi_priv.pwd_admin->password is an array (not a pointer), so the correct
way to check for the password being set is to check for
tlmi_priv.pwd_admin->password[0] != 0.
For the second check, replace the check with checking that auth_str is
set instead.
Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505158 ("NO_EFFECT")
Fixes: a7314b3b1d8a ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-1-hdegoede@redhat.com
The dell-wmi-sysman and think-lmi kernel modules both have a global
struct class *fw_attr_class variable, leading to the following compile
errors when both are builtin:
ld: drivers/platform/x86/think-lmi.o:(.bss+0x0): multiple definition of `fw_attr_class'; drivers/platform/x86/dell/dell-wmi-sysman/sysman.o:(.bss+0x0): first defined here
In both cases the variable is only used in the file where it is declared.
Make both declarations static to avoid the linker error.
Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Dell.Client.Kernel@dell.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609145952.113393-1-hdegoede@redhat.com
drivers/platform/x86/intel_ips.c:832:6: warning: variable ‘ret’ set but
not used [-Wunused-but-set-variable]
832 | u16 ret;
| ^~~
Fix it by mark ret as '__maybe_unused'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210607014702.2981097-1-yangerkun@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of base_attr_group and hubless_base_attr_group is to pass
their addresses to sysfs_create_group() and sysfs_remove_group(), both
which takes pointers to const attribute_group structs. Make them const
to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lore.kernel.org/r/20210605203807.60547-5-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of tc1100_attribute_group is to pass its address to
sysfs_create_group() and sysfs_remove_group(), both which takes pointer
to const attribute_group structs. Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605203807.60547-4-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of pmt_crashlog_group is to assign its address to the
attr_grp field in the intel_pmt_namespace struct, which is a pointer to
const attribute_group. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605203807.60547-3-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of hdaps_attribute_group is to pass its address to
sysfs_create_group() and sysfs_remove_group(), both which takes pointers
to const attribute_group structs. Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Frank Seidel <frank@f-seidel.de>
Link: https://lore.kernel.org/r/20210605203807.60547-2-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
drivers/platform/x86/firmware_attributes_class.c:11:5: warning: symbol 'fw_attr_inuse' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210603153936.GA65404@7832cb195c0b
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The struct tlmi_pwd_setting display_name member is initialized,
but never read. Remove it and the TLMI_PWDTYPE_MAXLEN define.
While at it also remove some other unused [MAX]LEN defines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210531135911.82582-1-hdegoede@redhat.com
For Lenovo platforms that support a WMI interface to the BIOS add
support, using the firmware-attributes class, to allow users to access
and modify various BIOS related settings.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-3-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update Dell WMI sysman driver to use newly implemented helper module.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-2-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This offers shared code for registering the firmware_attributes_class,
which is used by the Dell and Lenovo WMI management drivers.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'error'.
Eliminate the follow smatch warning:
drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard()
warn: missing error code 'error'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix the comment on the entry for the Chuwi Hi10 Pro tablet:
1. Replace "Prus" type with "Pro".
2. Fix the model number, the Chuwi Hi10 Pro is the CWI529, not the CWI597.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210530104744.6720-1-hdegoede@redhat.com
add support for Dell privacy driver for the Dell units equipped
hardware privacy design, which protect users privacy of audio and
camera from hardware level. Once the audio or camera privacy mode
activated, any applications will not get any audio or video stream
when user pressed ctrl+F4 hotkey, audio privacy mode will be
enabled, micmute led will be also changed accordingly
The micmute led is fully controlled by hardware & EC(embedded controller)
and camera mute hotkey is Ctrl+F9. Currently design only emits
SW_CAMERA_LENS_COVER event while the camera lens shutter will be
changed by EC & HW(hardware) control
*The flow is like this:
1) User presses key. HW does stuff with this key (timeout timer is started)
2) WMI event is emitted from BIOS to kernel
3) WMI event is received by dell-privacy
4) KEY_MICMUTE emitted from dell-privacy
5) Userland picks up key and modifies kcontrol for SW mute
6) Codec kernel driver catches and calls ledtrig_audio_set
7) dell-privacy notifies EC, the timeout is cancelled and the HW mute
is activated. If the EC is not notified then the HW mic mute will
activate when the timeout triggers, just a bit later than with the
active ack.
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com
[hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename dell-wmi.c to dell-wmi-base.c, so that we can have other
dell-wmi-foo.c files which can be added to dell-wmi.ko as "plugins"
controlled by separate boolean Kconfig options.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.
Signed-off-by: Til Jasper Ullrich <tju@tju.me>
Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
VPC event bit 10 gets set on a Yoga 300-11IBR when the EC believes that the
device has changed between laptop/tent/stand/tablet mode.
The EC relies on getting angle info from 2 accelerometers through a special
windows service calling a DSM on the DUAL250E ACPI-device. Linux does not
do this, making the laptop/tent/stand/tablet mode info unreliable.
Ignore VPC event bit 10 to avoid the warnings triggered by the default case
in ideapad_acpi_notify().
Note that the plan for Linux is to have iio-sensor-proxy read the 2
accelerometers and have it provide info about which mode 360° hinges
2-in-1s to the rest of userspace:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210523172331.177834-1-hdegoede@redhat.com
The quirks added to asus-nb-wmi for the ASUS ROG Zephyrus G14 and G15 are
wrong, they tell the asus-wmi code to use the vendor specific WMI backlight
interface. But there is no such interface on these laptops.
As a side effect, these quirks stop the acpi_video driver to register since
they make acpi_video_get_backlight_type() return acpi_backlight_vendor,
leaving only the native AMD backlight driver in place, which is the one we
want. This happy coincidence is being replaced with a new quirk in
drivers/acpi/video_detect.c which actually sets the backlight_type to
acpi_backlight_native fixinf this properly. This reverts
commit 13bceda68f ("platform/x86: asus-nb-wmi: add support for ASUS ROG
Zephyrus G14 and G15").
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-3-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation revert for reverting the "add support for ASUS ROG
Zephyrus G14 and G15" change. This reverts
commit 67186653c9 ("platform/x86: asus-nb-wmi: Drop duplicate DMI quirk
structures")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver was originally intended to support some HP laptops, but
later support was added for Xioami and AMD laptops.
Rename it to make it clear that it supports a larger variety of
systems.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210519174405.30155-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Those blobs can only be read. So, don't confuse users with 'writable'
flags. Also, remove S_IFREG because debugfs takes care of that.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210517100746.29663-2-wsa+renesas@sang-engineering.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Making '==' operation with ESM_STATUS_CMD_UNSUCCESSFUL directly
after calling the function inb() is more efficient, so assignment
to 'cmd_status' is redundant.
Eliminate the following clang_analyzer warning:
drivers/platform/x86/dell/dcdbas.c:397:11: warning: Although the value
stored to 'cmd_status' is used in the enclosing expression, the value
is never actually read from 'cmd_status'
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1620809825-84105-1-git-send-email-yang.lee@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Type-C connector on these devices is connected to DP-2 not DP-1,
so the reference must be to the DD04 child-node of the GPU, rather
then the DD02 child-node.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210503154647.142551-10-hdegoede@redhat.com
1. Check acpi type before assignment of each property value
2. Add boundary check for properties count
Co-developed-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Link: https://lore.kernel.org/r/20210512102530.9704-1-prasanth.ksr@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.
Signed-off-by: Til Jasper Ullrich <tju@tju.me>
Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Bay Trail Glavey TM800A550L tablet, which ships with Android installed
from the factory, uses a GT912 touchscreen controller which needs to have
its firmware uploaded by the OS to work (this is a first for a x86 based
device with a Goodix touchscreen controller).
Add a touchscreen_dmi entry for this which specifies the filenames
to use for the firmware and config files needed for this.
Note this matches on a GDIX1001 ACPI HID, while the original DSDT uses
a HID of GODX0911. For the touchscreen to work on these devices a DSDT
override is necessary to fix a missing IRQ and broken GPIO settings in
the ACPI-resources for the touchscreen. This override also changes the
HID to the standard GDIX1001 id typically used for Goodix touchscreens.
The DSDT override is available here:
https://fedorapeople.org/~jwrdegoede/glavey-tm800a550l-dsdt-override/
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-5-hdegoede@redhat.com
Teclast X89 tablets come in 2 versions, with Windows pre-installed and with
Android pre-installed. These 2 versions have different DMI strings.
Add a match for the DMI strings used by the Android version BIOS.
Note the Android version BIOS has a bug in the DSDT where no IRQ is
provided, so for the touchscreen to work a DSDT override fixing this
is necessary as well.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-4-hdegoede@redhat.com
Move the DMI quirks for upside-down mounted Goodix touchscreens from
drivers/input/touchscreen/goodix.c to
drivers/platform/x86/touchscreen_dmi.c,
where all the other x86 touchscreen quirks live.
Note the touchscreen_dmi.c code attaches standard touchscreen
device-properties to an i2c-client device based on a combination of a
DMI match + a device-name match. I've verified that the: Teclast X98 Pro,
WinBook TW100 and WinBook TW700 uses an ACPI devicename of "GDIX1001:00"
based on acpidumps and/or dmesg output available on the web.
This patch was tested on a Teclast X89 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-2-hdegoede@redhat.com
Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210520093228.7439-1-hdegoede@redhat.com
Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet.
Tested on 5.11 hirsute.
Note: it's hw clone to Wintron surftab 7.
Signed-off-by: Teava Radu <rateava@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-6-hdegoede@redhat.com
The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.
Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:
[ 175.722921] ------------[ cut here ]------------
[ 175.722925] Unexpected driver unregister!
[ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40
...
[ 175.723089] Call Trace:
[ 175.723094] cleanup_module+0x5/0xedd [dell_smbios]
...
[ 175.723148] ---[ end trace 064c34e1ad49509d ]---
Make the unregister happen on the same condition the register happens
to fix this.
Cc: Mario Limonciello <mario.limonciello@outlook.com>
Fixes: 1a258e6704 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com
Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 871f1f2bcb ("platform/x86: intel_int0002_vgpio: Only implement
irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
the parents IRQ because this was breaking suspend (causing immediate
wakeups) on an Asus E202SA.
This workaround for the Asus E202SA is causing wakeup by USB keyboard to
not work on other devices with Airmont CPU cores such as the Medion Akoya
E1239T. In hindsight the problem with the Asus E202SA has nothing to do
with Silvermont vs Airmont CPU cores, so the differentiation between the
2 types of CPU cores introduced by the previous fix is wrong.
The real issue at hand is s2idle vs S3 suspend where the suspend is
mostly handled by firmware. The parent IRQ for the INT0002 device is shared
with the ACPI SCI and the real problem is that the INT0002 code should not
be messing with the wakeup settings of that IRQ when suspend/resume is
being handled by the firmware.
Note that on systems which support both s2idle and S3 suspend, which
suspend method to use can be changed at runtime.
This patch fixes both the Asus E202SA spurious wakeups issue as well as
the wakeup by USB keyboard not working on the Medion Akoya E1239T issue.
These are both fixed by replacing the old workaround with delaying the
enable_irq_wake(parent_irq) call till system-suspend time and protecting
it with a !pm_suspend_via_firmware() check so that we still do not call
it on devices using firmware-based (S3) suspend such as the Asus E202SA.
Note rather then adding #ifdef CONFIG_PM_SLEEP, this commit simply adds
a "depends on PM_SLEEP" to the Kconfig since this drivers whole purpose
is to deal with wakeup events, so using it without CONFIG_PM_SLEEP makes
no sense.
Cc: Maxim Mikityanskiy <maxtram95@gmail.com>
Fixes: 871f1f2bcb ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20210512125523.55215-2-hdegoede@redhat.com
With commit 312c004d36 ("[PATCH] driver core: replace "hotplug" by
"uevent"") already in the tree over a decade, update the name of
FW_ACTION defines to follow semantics, and reflect what the defines are
really meant for, i.e. whether or not generate user space event.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210425020024.28057-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hp_accel can take almost two seconds to resume on some HP laptops.
The bottleneck is on evaluating _INI, which is only needed to run once.
Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Éric Piel <eric.piel@trempplin-utc.net>
Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
"smbc" should be "sbmc". `eval_smbc()` incorrectly called
the SMBC ACPI method instead of SBMC. This resulted in
partial loss of functionality. Rectify that by calling
the correct ACPI method (SBMC), and also rename
methods and constants.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212985
Fixes: 0b765671cb ("platform/x86: ideapad-laptop: group and separate (un)related constants into enums")
Fixes: ff36b0d953 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210507235333.286505-1-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The third parameter of dytc_cql_command should not be NULL since it will
be dereferenced immediately.
Fixes: ff36b0d953 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20210428050636.8003-1-qiuwenbo@kylinos.com.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."
I recently receive a patch to explicitly add a new one.
Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.
It is even nicer if scripts/checkpatch.pl can check it.
If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.
[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/
Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c updates from Wolfram Sang:
- new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit
- bigger refactoring for the MPC driver
- support for full software nodes - no need to work around with only
properties anymore
- we now have 'devm_i2c_add_adapter', too
- sub-system wide fixes for the RPM refcounting problem which often
caused a leak when an error was encountered during probe
- the rest is usual driver updates and improvements
* 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching
i2c: mediatek: Fix wrong dma sync flag
i2c: mediatek: Fix send master code at more than 1MHz
i2c: sh7760: fix IRQ error path
i2c: i801: Add support for Intel Alder Lake PCH-M
i2c: core: Fix spacing error by checkpatch
i2c: s3c2410: simplify getting of_device_id match data
i2c: nomadik: Fix space errors
i2c: iop3xx: Fix coding style issues
i2c: amd8111: Fix coding style issues
i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()
i2c: mpc: Use device_get_match_data() helper
i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery
i2c: mpc: Use devm_clk_get_optional()
i2c: mpc: Update license and copyright
i2c: mpc: Interrupt driven transfer
i2c: sh7760: add IRQ check
i2c: rcar: add IRQ check
i2c: mlxbf: add IRQ check
i2c: jz4780: add IRQ check
...
Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work
with (something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa42A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMEACgkQBzLb5W/IocS+oq7+D7P3V581sAn1Dcy2Qq
Yz370/X2hrjXAyIm7/Cz
=5dj/
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work with
(something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits)
usb: Fix up movement of USB core kerneldoc location
usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability
usb: dwc3: Capture new capability register GHWPARAMS9
usb: gadget: prevent a ternary sign expansion bug
usb: dwc3: core: Do core softreset when switch mode
usb: dwc2: Get rid of useless error checks in suspend interrupt
usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
usb: dwc2: Add exit hibernation mode before removing drive
usb: dwc2: Add hibernation exiting flow by system resume
usb: dwc2: Add hibernation entering flow by system suspend
usb: dwc2: Allow exit hibernation in urb enqueue
usb: dwc2: Move exit hibernation to dwc2_port_resume() function
usb: dwc2: Move enter hibernation to dwc2_port_suspend() function
usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
usb: dwc2: Clear fifo_map when resetting core.
usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
usb: dwc2: Fix hibernation between host and device modes.
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
usb: dwc2: Update exit hibernation when port reset is asserted
...
Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set fw_devlink=on by default. All reported issues
with this have been shaken out over the past 9 months or so,
but we will be paying attention to any fallout here in case we
need to revert this as the default boot value (symptoms of
problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some
subsystems (like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIazPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylzUwCguQ+VUs1d0voq/oKiqR+lbXnQf3kAn0jf/eom
ucRSdeIc21eEE83Ei9aZ
=pchl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set 'fw_devlink=on' by default.
All reported issues with this have been shaken out over the past 9
months or so, but we will be paying attention to any fallout here
in case we need to revert this as the default boot value (symptoms
of problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some subsystems
(like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits)
devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc
PM / wakeup: use dev_set_name() directly
software node: Allow node addition to already existing device
kunit: software node: adhear to KUNIT formatting standard
node: fix device cleanups in error handling code
kobject_uevent: remove warning in init_uevent_argv()
debugfs: Make debugfs_allow RO after init
Revert "driver core: platform: Make platform_get_irq_optional() optional"
media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()
software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro
software node: Imply kobj_to_swnode() to be no-op
software node: Deduplicate code in fwnode_create_software_node()
software node: Introduce software_node_alloc()/software_node_free()
software node: Free resources explicitly when swnode_register() fails
debugfs: drop pointless nul-termination in debugfs_read_file_bool()
driver core: add helper for deferred probe reason setting
driver core: Improve fw_devlink & deferred_probe_timeout interaction
of: property: fw_devlink: Add support for remote-endpoint
driver core: platform: Make platform_get_irq_optional() optional
driver core: Replace printf() specifier and drop unneeded casting
...
The simple_write_to_buffer() can return success if even a single byte
is copied from user space. In this case it can result in using
uninitalized data if the buf[] array is not fully initialized. Really
we should only succeed if the whole buffer is copied.
Just using copy_from_user() is simpler and more appropriate.
Fixes: 8074a79fad ("platform/x86: intel_pmc_core: Add option to set/clear LPM mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YIBCf+G9Ef8wrGJw@mwanda
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver now fails to build without ACPI:
drivers/platform/x86/intel_pmc_core.c: In function 'pmc_core_get_tgl_lpm_reqs':
drivers/platform/x86/intel_pmc_core.c:617:41: error: invalid use of undefined type 'struct acpi_device'
617 | out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0,
This could probably be made optional, but it won't be used without
ACPI in practice, so just add a Kconfig dependency.
Fixes: 428131364f ("platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210421134957.3329062-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change the type of ret form a size_t to a ssize_t, matching the prototype
of simple_write_to_buffer(), fixing this warning reported by smatch:
drivers/platform/x86/intel_pmc_core.c:1369 pmc_core_lpm_latch_mode_write() warn: unsigned 'ret' is never less than zero.
Fixes: 8074a79fad ("platform/x86: intel_pmc_core: Add option to set/clear LPM mode")
Cc: David E. Box <david.e.box@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210419143109.30612-1-hdegoede@redhat.com
Add touchscreen info for the Teclast Tbook 11 tablet. This includes info
for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417173105.4134-1-hdegoede@redhat.com
Alder PCH-P is based on Tiger Lake PCH.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-10-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Just like Ice Lake, Tiger Lake uses Cannon Lake's LTR information
and supports a few additional registers. Hence add the LTR registers
specific to Tiger Lake to the cnp_ltr_show_map[].
Also adjust the number of LTR IPs for Tiger Lake to the correct amount.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-9-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
By default the Low Power Mode (LPM or sub-state) status registers will
latch condition status on every entry into Package C10. This is
configurable in the PMC to allow latching on any achievable sub-state. Add
a debugfs file to support this.
Also add the option to clear the status registers to 0. Clearing the status
registers before testing removes ambiguity around when the current values
were set.
The new file, latch_lpm_mode, looks like this:
[c10] S0i2.0 S0i3.0 S0i2.1 S0i3.1 S0i3.2 clear
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-8-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Platforms that support low power modes (LPM) such as Tiger Lake maintain
requirements for each sub-state that a readable in the PMC. However, unlike
LPM status registers, requirement registers are not memory mapped but are
available from an ACPI _DSM. Collect the requirements for Tiger Lake using
the _DSM method and store in a buffer.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-6-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Modify the low power mode (LPM or sub-state) residency counters to display
in microseconds just like the slp_s0_residency counter. The granularity of
the counter is approximately 30.5us per tick. Double this value then divide
by two to maintain accuracy.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-5-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The current implementation of pmc_core_substate_res_show() is written
specifically for Tiger Lake. However, new platform will also have
sub-states and may support different modes. Therefore rewrite the code to
handle sub-states generically.
Obtain the number and type of enabled states form the PMC. Use the Low
Power Mode (LPM) priority register to store the states in order from
shallowest to deepest for displays. Add a for_each macro to simplify
this. While changing the sub-state display it makes sense to show only the
"enabled" sub-states instead of showing all possible ones. After this
patch, the debugfs file looks like this:
Substate Residency
S0i2.0 0
S0i3.0 0
S0i2.1 9329279
S0i3.1 0
S0i3.2 0
Suggested-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-4-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The intel_pmc_core driver did not always bind to a device which meant it
lacked a struct device that could be used to maintain driver data. So a
global instance of struct pmc_dev was used for this purpose and functions
accessed this directly. Since the driver now binds to an ACPI device,
remove the global pmc_dev in favor of one that is allocated during probe.
Modify users of the global to obtain the object by argument instead.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-3-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The DMI callbacks, used for quirks, currently access the PMC by getting
the address a global pmc_dev struct. Instead, have the callbacks set a
global quirk specific variable. In probe, after calling dmi_check_system(),
pass pmc_dev to a function that will handle each quirk if its variable
condition is met. This allows removing the global pmc_dev later.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Coccinelle noticed:
drivers/platform/x86/intel_chtdc_ti_pwrbtn.c:59:7-32: ERROR: Threaded IRQ
with no primary handler requested without IRQF_ONESHOT
Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com>
Link: https://lore.kernel.org/r/20210415091435.10486-1-zhuguangqing83@gmail.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the X570 AORUS ELITE to gigabyte_wmi_known_working_platforms
Signed-off-by: Julian Labus <julian@labus-online.de>
Acked-By: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/20210415074526.1782-1-julian@labus-online.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On EC version 3, the first 2 temperature sensors are always CPU and GPU
add labels for these.
This changes e.g. the "sensors" command output on a X1C8 from:
thinkpad-isa-0000
Adapter: ISA adapter
fan1: 2694 RPM
temp1: +42.0°C
temp2: N/A
temp3: +33.0°C
temp4: +0.0°C
temp5: +35.0°C
temp6: +42.0°C
temp7: +42.0°C
temp8: N/A
into:
thinkpad-isa-0000
Adapter: ISA adapter
fan1: 2694 RPM
CPU: +42.0°C
GPU: N/A
temp3: +33.0°C
temp4: +0.0°C
temp5: +35.0°C
temp6: +42.0°C
temp7: +42.0°C
temp8: N/A
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210413072112.183550-1-hdegoede@redhat.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBzdS0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDdAIAIpKH/tAHhH7s7QH
m5ewgE8foP7M5Ue9fp3+JmbtaYSzhCAMcKhqGtat/zk5PvA9AoYCDXrTetfYtBHh
LUOmhL9hcKItNobfkYBok6BiFjGUEL3HMqz5w+MUsMwnXIc4RXqfJmsQ932z9Kxf
yDwe6ehIzJVrQLI/C0mTamYRHu2aiZ1VWzhKuT493rLeg0R2odCCIClPN+/QvCwb
8/sk6l1c8eOUYYMUzKFZifaZGb12qDjRt4pZmk51aMTzg0WCpElJG+7Uqr4QQhZP
p6xeNuUQq6WwxtlDkmo79Uzkrurb5tN2/hZ1RcJhs3EdHfpR0MjIyH3Znnb31gnu
39VjHhg=
=4KP/
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rc7' into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pmc_plt_clk* clocks are used for ethernet controllers, so need to stay
turned on. This adds the affected board family to critclk_systems DMI
table, so the clocks are marked as CLK_CRITICAL and not turned off.
This replaces the previously listed boards with a match for the whole
device family CBxx63. CBxx63 matches only baytrail devices.
There are new affected boards that would otherwise need to be listed.
There are unaffected boards in the family, but having the clocks
turned on is not an issue.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested with
* X570 I Aorus Pro Wifi (rev 1.0)
* B550M DS3H
* B550 Gaming X V2 (rev.1.x)
* Z390 I AORUS PRO WIFI (rev. 1.0)
Those mainboards contain an ITE chips for management and
monitoring.
They could also be handled by drivers/hwmon/i87.c.
But the SuperIO range used by i87 is already claimed and used by the
firmware.
The following warning is printed at boot:
kernel: ACPI Warning: SystemIO range 0x0000000000000A45-0x0000000000000A46 conflicts with OpRegion 0x0000000000000A45-0x0000000000000A46 (\GSA1.SIO1) (20200528/utaddress-204)
kernel: ACPI: This conflict may cause random problems and system instability
kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
This driver implements such an ACPI driver.
Unfortunately not all sensor registers are handled by the firmware and even
less are exposed via WMI.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210412123513.628901-1-linux@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
During PCH (platform/board) manufacturing process a global platform
reset has to be induced in order for the configuration changes take
the effect upon following platform reset. This is an internal platform
state and is not intended to be used in the regular platform resets.
The setting is exposed via ETR3 (Extended Test Mode Register 3).
After the manufacturing process is completed the register cannot be
written anymore and is hardware locked.
This setting was commonly done by accessing PMC registers via /dev/mem
but due to security concerns /dev/mem access is much more restricted,
hence the reason for exposing this setting via the dedicated sysfs
interface.
To prevent post manufacturing abuse the register is protected
by hardware locking and the file is set to read-only mode via is_visible
handler.
The register in MMIO space is defined for Cannon Lake and newer PCHs.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David E Box <david.e.box@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210411141532.3004893-1-tomas.winkler@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On recent Thinkpad platforms it was reported that temp sensor 11 was
always incorrectly displaying 66C. It turns out the reason for this is
that this location in EC RAM is not a temperature sensor but is the
power supply ID (offset 0xC2).
Based on feedback from the Lenovo firmware team the EC RAM version can
be determined and for the current version (3) only the 0x78 to 0x7F
range is used for temp sensors. I don't have any details for earlier
versions so I have left the implementation unaltered there.
Note - in this block only 0x78 and 0x79 are officially designated (CPU &
GPU sensors). The use of the other locations in the block will vary from
platform to platform; but the existing logic to detect a sensor presence
holds.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add a displayport altmode fwnode to the usb-connector fwnode,
devices which use this driver support display-port altmode through
the PI3USB30532 USB switch, this enables support for this.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210409134033.105834-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BIOS team have added a new API that allows us to retrieve the
current performance profile without having to disable/enable CQL
mode. Adding the changes to use this API.
Tested on P15 and X1C8
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210406233203.232860-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In some cases when firmware is busy or updating, some mailbox commands
still timeout on some newer CPUs. To fix this issue, change how we
process timeout.
With this change, replaced timeout from using simple count with real
timeout in micro-seconds using ktime. When the command response takes
more than average processing time, yield to other tasks. The worst case
timeout is extended upto 1 milli-second.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210330220840.3113959-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make init_bios_attributes() ACPI object parsing more robust:
1. Always check that the type of the return ACPI object is package, rather
then only checking this for instance_id == 0
2. Check that the package has the minimum amount of elements which will
be consumed by the populate_foo_data() for the attr_type
Note/TODO: The populate_foo_data() functions should also be made more
robust. The should check the type of each of the elements matches the
type which they expect and in case of populate_enum_data()
obj->package.count should be passed to it as an argument and it should
re-check this itself since it consume a variable number of elements.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321121607.35717-1-hdegoede@redhat.com
The variable result is being assigned a value that is never
read and it is being updated later with a new value. The
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210326192022.623001-1-colin.king@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that we have 2 separate input_dev-s for the buttons and the switches,
this is no longer used, remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210325123255.73103-1-hdegoede@redhat.com
* On recent ZenBooks the fn-lock is disabled
by default on boot while running Windows.
* Add a module param ( fnlock_default ) that allows
changing the default at probe time
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Link: https://lore.kernel.org/r/20210323210126.145286-1-luca.stefani.ge1@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Advantech sw_button is a ACPI event trigger button.
With this driver, we can report KEY_PROG1 on the
Advantech Tabletop Network Appliances products and it has been
tested in FWA1112VC.
Add the software define button support to report EV_REP key_event
(KEY_PROG1) by pressing button that could be get on user
interface and trigger the customized actions.
Signed-off-by: Andrea.Ho <Andrea.Ho@advantech.com.tw>
Link: https://lore.kernel.org/r/20210319034427.23222-1-andrea.cs97g@nctu.edu.tw
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some devices send (duplicate) tablet-mode events when moved around even
though the mode has not changed; and they do this even when suspended.
Change the tablet-mode event handling when priv->wakeup_mode is set to
update the switch state in case it changed and then return immediately
(without calling pm_wakeup_hard_event()) to avoid spurious wakeups.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537
Fixes: 537b0dd472 ("platform/x86: intel-hid: Add support for SW_TABLET_MODE")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com
Some devices send (duplicate) tablet-mode events when moved around even
though the mode has not changed; and they do this even when suspended.
Change the tablet-mode event handling when priv->wakeup_mode is set to
update the switch state in case it changed and then return immediately
(without calling pm_wakeup_hard_event()) to avoid spurious wakeups.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537
Fixes: 537b0dd472 ("platform/x86: intel-hid: Add support for SW_TABLET_MODE")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.
Fixes: 5ef9998c96 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use kobj_to_dev() instead of container_of()
Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
CC: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103171258010.2981@hadrien
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
s/derefence/dereference/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210317084343.3788084-1-unixbhaskar@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.
Fixes: 5ef9998c96 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Few drivers implement remove call-back only for ensuring a delayed
work gets cancelled prior driver removal. Clean-up these by switching
to use devm_delayed_work_autocancel() instead.
This change is compile-tested only. All testing is appreciated.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/aa25a6781ba016772b045cd6e630da8c559a665d.1616506559.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some newer Thinkpads we need to set SAR value based on antenna type.
This patch provides a sysfs interface that userspace can use to get
antenna type and set corresponding SAR value, as is required for FCC
certification.
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Link: https://lore.kernel.org/r/20210317024636.356175-1-njoshi1@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stop reporting SW_DOCK events because this breaks suspend-on-lid-close.
SW_DOCK should only be reported for docking stations, but all the DSDTs in
my DSDT collection which use the intel-vbtn code, always seem to use this
for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem
with setting SW_TABLET_MODE=0).
This causes userspace to think the laptop is docked to a port-replicator
and to disable suspend-on-lid-close, which is undesirable.
Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.
Note this may theoretically cause us to stop reporting SW_DOCK on some
device where the 0xCA and 0xCB intel-vbtn events are actually used for
reporting docking to a classic docking-station / port-replicator but
I'm not aware of any such devices.
Also the most important thing is that we only report SW_DOCK when it
reliably reports being docked to a classic docking-station without any
false positives, which clearly is not the case here. If there is a
chance of reporting false positives then it is better to not report
SW_DOCK at all.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com
Cleanup create_attributes_level_sysfs_files():
1. There is no need to call sysfs_remove_file() on error, sysman_init()
will already call release_attributes_data() on failure which already does
this.
2. There is no need for the pr_debug() calls sysfs_create_file() should
never fail and if it does it will already complain about the problem
itself.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-8-hdegoede@redhat.com
When either the attributes or the password interface is not found, then
unregister the 2 wmi drivers again and return -ENODEV from sysman_init().
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com
Cleanup sysman_init() error-exit handling:
1. There is no need for the fail_reset_bios and fail_authentication_kset
eror-exit cases, these can be handled by release_attributes_data()
2. Rename all the labels from fail_what_failed, to err_what_to_cleanup
this is the usual way to name these and avoids the need to rename
them when extra steps are added.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-6-hdegoede@redhat.com
All calls of init_bios_attributes() will result in a
goto fail_create_group if they fail, which calls
release_attributes_data().
So there is no need to call release_attributes_data() from
init_bios_attributes() on failure itself.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-5-hdegoede@redhat.com
During some of the error-exit paths it is possible that
release_attributes_data() will get called multiple times,
which results in exit_foo_attributes() getting called multiple
times.
Make it safe to call exit_foo_attributes() multiple times,
avoiding double-free()s in this case.
Note that release_attributes_data() really should only be called
once during error-exit paths. This will be fixed in a separate patch
and it is good to have the exit_foo_attributes() functions modified
this way regardless.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-4-hdegoede@redhat.com
It is possible for release_attributes_data() to get called when the
main_dir_kset has not been created yet, move the removal of the bios-reset
sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer
deref.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-3-hdegoede@redhat.com
On some system the WMI GUIDs used by dell-wmi-sysman are present but there
are no enum type attributes, this causes init_bios_attributes() to return
-ENODEV, after which sysman_init() does a "goto fail_create_group" and then
calls release_attributes_data().
release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset);
but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;"
statement; and after calling release_attributes_data() the sysman_init()
error handling does this:
if (wmi_priv.main_dir_kset) {
kset_unregister(wmi_priv.main_dir_kset);
wmi_priv.main_dir_kset = NULL;
}
Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to
a double-free, which causes a crash.
Add the missing "wmi_priv.main_dir_kset = NULL;" statement to
release_attributes_data() to fix this double-free crash.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-2-hdegoede@redhat.com
Testing has shown that setting /sys/firmware/acpi/platform_profile to
"balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode
reports 1, causes dytc_lapmode to get reset to 0 and then it becomes
stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap.
Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get
back to balanced mode and re-enabling it afterwards again, like the
code already does when switching to low-power / performance mode fixes
this.
Fixes: c3bfcd4c67 ("platform/x86: thinkpad_acpi: Add platform profile support")
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com
On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.
With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.
This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.
The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.
Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015
Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stop reporting SW_DOCK events because this breaks suspend-on-lid-close.
SW_DOCK should only be reported for docking stations, but all the DSDTs in
my DSDT collection which use the intel-vbtn code, always seem to use this
for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem
with setting SW_TABLET_MODE=0).
This causes userspace to think the laptop is docked to a port-replicator
and to disable suspend-on-lid-close, which is undesirable.
Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.
Note this may theoretically cause us to stop reporting SW_DOCK on some
device where the 0xCA and 0xCB intel-vbtn events are actually used for
reporting docking to a classic docking-station / port-replicator but
I'm not aware of any such devices.
Also the most important thing is that we only report SW_DOCK when it
reliably reports being docked to a classic docking-station without any
false positives, which clearly is not the case here. If there is a
chance of reporting false positives then it is better to not report
SW_DOCK at all.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com
Cleanup create_attributes_level_sysfs_files():
1. There is no need to call sysfs_remove_file() on error, sysman_init()
will already call release_attributes_data() on failure which already does
this.
2. There is no need for the pr_debug() calls sysfs_create_file() should
never fail and if it does it will already complain about the problem
itself.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-8-hdegoede@redhat.com
When either the attributes or the password interface is not found, then
unregister the 2 wmi drivers again and return -ENODEV from sysman_init().
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com
Cleanup sysman_init() error-exit handling:
1. There is no need for the fail_reset_bios and fail_authentication_kset
eror-exit cases, these can be handled by release_attributes_data()
2. Rename all the labels from fail_what_failed, to err_what_to_cleanup
this is the usual way to name these and avoids the need to rename
them when extra steps are added.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-6-hdegoede@redhat.com
All calls of init_bios_attributes() will result in a
goto fail_create_group if they fail, which calls
release_attributes_data().
So there is no need to call release_attributes_data() from
init_bios_attributes() on failure itself.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-5-hdegoede@redhat.com
During some of the error-exit paths it is possible that
release_attributes_data() will get called multiple times,
which results in exit_foo_attributes() getting called multiple
times.
Make it safe to call exit_foo_attributes() multiple times,
avoiding double-free()s in this case.
Note that release_attributes_data() really should only be called
once during error-exit paths. This will be fixed in a separate patch
and it is good to have the exit_foo_attributes() functions modified
this way regardless.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-4-hdegoede@redhat.com
It is possible for release_attributes_data() to get called when the
main_dir_kset has not been created yet, move the removal of the bios-reset
sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer
deref.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-3-hdegoede@redhat.com
On some system the WMI GUIDs used by dell-wmi-sysman are present but there
are no enum type attributes, this causes init_bios_attributes() to return
-ENODEV, after which sysman_init() does a "goto fail_create_group" and then
calls release_attributes_data().
release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset);
but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;"
statement; and after calling release_attributes_data() the sysman_init()
error handling does this:
if (wmi_priv.main_dir_kset) {
kset_unregister(wmi_priv.main_dir_kset);
wmi_priv.main_dir_kset = NULL;
}
Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to
a double-free, which causes a crash.
Add the missing "wmi_priv.main_dir_kset = NULL;" statement to
release_attributes_data() to fix this double-free crash.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-2-hdegoede@redhat.com
Testing has shown that setting /sys/firmware/acpi/platform_profile to
"balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode
reports 1, causes dytc_lapmode to get reset to 0 and then it becomes
stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap.
Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get
back to balanced mode and re-enabling it afterwards again, like the
code already does when switching to low-power / performance mode fixes
this.
Fixes: c3bfcd4c67 ("platform/x86: thinkpad_acpi: Add platform profile support")
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com
On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.
With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.
This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.
The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.
Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015
Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lenovo platforms with DYTC versions earlier than version 5 don't set
the lapmode interface correctly, causing issues with thermald on
older platforms.
Add checking to only create the dytc_lapmode interface for version
5 and later.
Fixes: 1ac09656bd ("platform/x86: thinkpad_acpi: Add palm sensor support")
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210311174843.3161-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lenovo platforms with DYTC versions earlier than version 5 don't set
the lapmode interface correctly, causing issues with thermald on
older platforms.
Add checking to only create the dytc_lapmode interface for version
5 and later.
Fixes: 1ac09656bd ("platform/x86: thinkpad_acpi: Add palm sensor support")
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210311174843.3161-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Adds PMT Telemetry aggregator support for the DG1 graphics PCIe card. The
device does not have the DVSEC region in its PCI config space so hard
code the discovery table data in the driver. Also requires a fix for DG1
in the Telemetry driver for how the ACCESS_TYPE field is used.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The old device property API (device_add_properties()) is
going to be removed. Replacing the it with the software node
API equivalent, device_create_managed_software_node().
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210304082023.17689-1-heikki.krogerus@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver core ignores the return value of struct bus_type::remove()
(and so wmi_dev_remove()) because there is only little that can be done.
To simplify the quest to make this function return void, let struct
wmi_driver::remove() return void, too. All implementers of this callback
return 0 already and this way it should be obvious to driver authors
that returning an error code is a bad idea.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210301160404.1677064-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A few x86 platform drivers use ACPI_DEBUG_PRINT() or ACPI_EXCEPTION()
for printing messages, but that is questionable, because those macros
belong to ACPICA and they should not be used elsewhere. In addition,
ACPI_DEBUG_PRINT() requires special enabling to allow it to actually
print the message, which is a nuisance, and the _COMPONENT symbol
generally needed for that is not defined in any of the files in
question.
For this reason, replace the ACPI_DEBUG_PRINT() in lg-laptop.c with
pr_debug() and the one in xo15-ebook.c with acpi_handle_debug()
(with the additional benefit that the source object can be identified
more easily after this change).
Also drop the ACPI_MODULE_NAME() definitions that are only used by
the ACPICA message printing macros from those files and from wmi.c
and surfacepro3_button.c (while at it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2074665.VPHYfYaQb6@kreacher
[hdegoede@redhat.com: Drop acer-wmi.c chunk, a similar patch was already merged]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.
Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement support for cool, balanced and performance thermal profile
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210221221339.12395-1-eliadevito@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
rename "thermal policy" with the more appropriate term "thermal profile"
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210221210256.68198-1-eliadevito@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
uses by -> used by
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/YCw6zavnfeHRGWgr@arkam
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Those events occur when a keyboard cover is attached to a ThinkPad
X1 Tablet series device. Typically, they are used to switch from normal
to tablet mode in userspace; e.g., to offer touch keyboard choices when
focus goes to a text box and no keyboard is attached, or to enable
autorotation of the display according to the builtin orientation sensor.
intel-vtbn already recognizes those events. To avoid sending duplicate
events to userspace, they are simply ignored. Thus, this patch only
avoids warnings about unknown and unhandled HKEYs 0x4012 and 0x4013.
For more information about the background and potential improvements for
different types of attachment options, such as the Pico cartridge dock
module, see
https://lore.kernel.org/platform-driver-x86/38cb8265-1e30-d547-9e12-b4ae290be737@a-kobel.de/
Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/83a0e45f-590d-0c7d-0afd-00a5a6322bd0@a-kobel.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.
Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add
"balanced-performance" to the list of supported platform profiles
and fix up some file references in a comment (Maximilian Luz).
- Add support for parsing the ACPI Firmware Performance Data Table
(FPDT) and exposing the data from there via sysfs (Zhang Rui).
-----BEGIN PGP SIGNATURE-----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=uIpI
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These make additional changes to the platform profile interface merged
recently and add support for the FPDT ACPI table.
Specifics:
- Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add
"balanced-performance" to the list of supported platform profiles
and fix up some file references in a comment (Maximilian Luz).
- Add support for parsing the ACPI Firmware Performance Data Table
(FPDT) and exposing the data from there via sysfs (Zhang Rui)"
* tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: platform: Add balanced-performance platform profile
ACPI: platform: Fix file references in comment
ACPI: platform: Hide ACPI_PLATFORM_PROFILE option
ACPI: tables: introduce support for FPDT table
Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=jlPz
-----END PGP SIGNATURE-----
Merge tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
The ACPI_PLATFORM_PROFILE option essentially provides a library and not
really an independent module. Thus it seems to be more user-friendly to
hide this option and simply make drivers depending on it select it.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this
macro (Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing
them again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system
shutdown on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power
allocator governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom
platforms. Please note those changes rely on an immutable branch:
iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP
6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI
bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8
WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j
MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp
7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2
jtWVYHQxZbY166IZP2yeXFjPzd6elw==
=Jmz4
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
(Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them
again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown
on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator
governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
thermal: qcom: Fix comparison with uninitialized variable channels_available
thermal: qcom: add support for adc-tm5 PMIC thermal monitor
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: ti-soc-thermal: Use non-inverted define for omap4
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal/drivers/zx: Remove zx driver
thermal/drivers/tango: Remove tango driver
thermal: power allocator: fail binding for non-power actor devices
thermal/core: Make cooling device state change private
thermal: intel: pch: Fix unexpected shutdown at critical temperature
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Remove ms based delay fields
thermal/core: Use precomputed jiffies for the polling
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Remove THERMAL_TRIPS_NONE test
...
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support
- Base / userspace API parts merged from Rafael's acpi-platform branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through merging
of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc. other fixes / new hw support / quirks
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: Fix possible deadlock in platform_profile_remove()
- platform-profile: Introduce object pointers to callbacks
- platform-profile: Drop const qualifier for cur_profile
- platform: Add platform profile support
Documentation:
- Add documentation for new platform_profile sysfs attribute
Documentation/ABI:
- sysfs-platform-ideapad-laptop: conservation_mode attribute
- sysfs-platform-ideapad-laptop: update device attribute paths
Kconfig:
- add missing selects for ideapad-laptop
MAINTAINERS:
- update email address for Henrique de Moraes Holschuh
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
- Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
Move all dell drivers to their own subdirectory:
- Move all dell drivers to their own subdirectory
Platform:
- OLPC: Constify static struct regulator_ops
- OLPC: Specify the enable time
- OLPC: Remove dcon_rdev from olpc_ec_priv
- OLPC: Fix probe error handling
Revert "platform/x86:
- ideapad-laptop: Switch touchpad attribute to be RO"
acer-wmi:
- Don't use ACPI_EXCEPTION()
amd-pmc:
- put device on error paths
- Fix CONFIG_DEBUG_FS check
dell-wmi-sysman:
- fix a NULL pointer dereference
docs:
- driver-api: Add Surface Aggregator subsystem documentation
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
hp-wmi:
- Disable tablet-mode reporting by default
- Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
i2c-multi-instantiate:
- Don't create platform device for INT3515 ACPI nodes
ideapad-laptop:
- add "always on USB charging" control support
- add keyboard backlight control support
- send notification about touchpad state change to sysfs
- fix checkpatch warnings, more consistent style
- change 'cfg' debugfs file format
- change 'status' debugfs file format
- check for touchpad support in _CFG
- check for Fn-lock support in HALS
- rework is_visible() logic
- rework and create new ACPI helpers
- group and separate (un)related constants into enums
- misc. device attribute changes
- always propagate error codes from device attributes' show() callback
- convert ACPI helpers to return -EIO in case of failure
- use dev_{err,warn} or appropriate variant to display log messages
- use msecs_to_jiffies() helper instead of hand-crafted formula
- use for_each_set_bit() helper to simplify event processing
- use kobj_to_dev()
- use device_{add,remove}_group
- use sysfs_emit()
- add missing call to submodule destructor
- sort includes lexicographically
- use appropriately typed variable to store the return value of ACPI methods
- remove unnecessary NULL checks
- remove unnecessary dev_set_drvdata() call
- DYTC Platform profile support
- Disable touchpad_switch for ELAN0634
intel-vbtn:
- Eval VBDL after registering our notifier
- Add alternative method to enable switches
- Create 2 separate input-devs for buttons and switches
- Rework wakeup handling in notify_handler()
- Drop HP Stream x360 Convertible PC 11 from allow-list
- Support for tablet mode on Dell Inspiron 7352
intel_mid_powerbtn:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_pmt:
- Make INTEL_PMT_CLASS non-user-selectable
intel_pmt_crashlog:
- Add dependency on MFD_INTEL_PMT
intel_pmt_telemetry:
- Add dependency on MFD_INTEL_PMT
intel_scu_ipc:
- Increase virtual timeout from 3 to 5 seconds
intel_scu_wdt:
- Drop mistakenly added const
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
msi-wmi:
- Fix variable 'status' set but not used compiler warning
platform/surface:
- aggregator: Fix access of unaligned value
- Add Surface Hot-Plug driver
- surface3-wmi: Fix variable 'status' set but not used compiler warning
- aggregator: Fix braces in if condition with unlikely() macro
- aggregator: Fix kernel-doc references
- aggregator: fix a kernel-doc markup
- aggregator_cdev: Add comments regarding unchecked allocation size
- aggregator_cdev: Fix access of uninitialized variables
- fix potential integer overflow on shift of a int
- Add Surface ACPI Notify driver
- Add Surface Aggregator user-space interface
- aggregator: Add dedicated bus and device type
- aggregator: Add error injection capabilities
- aggregator: Add trace points
- aggregator: Add event item allocation caching
- aggregator: Add control packet allocation caching
- Add Surface Aggregator subsystem
- SURFACE_PLATFORMS should depend on ACPI
- surface_gpe: Fix non-PM_SLEEP build warnings
platform/x86/intel-uncore-freq:
- Add Sapphire Rapids server support
rtc:
- mrst: Remove driver for deprecated platform
sony-laptop:
- Remove unneeded semicolon
thinkpad_acpi:
- Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
- Fix 'warning: no previous prototype for' warnings
- Add platform profile support
- fixed warning and incorporated review comments
- rectify length of title underline
- Don't register keyboard_lang unnecessarily
- set keyboard language
- Add P53/73 firmware to fan_quirk_table for dual fan control
- correct palmsensor error checking
tools/power/x86/intel-speed-select:
- Update version to 1.8
- Add new command to get/set TRL
- Add new command turbo-mode
- Set higher of cpuinfo_max_freq or base_frequency
- Set scaling_max_freq to base_frequency
touchscreen_dmi:
- Add info for the Jumper EZpad 7 tablet
- Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
=B+Fz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
SFI-based platforms are gone. So does this framework.
This removes mention of SFI through the drivers and other code as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
