Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.
@@
expression panel;
expression device;
identifier ops;
@@
drm_panel_init(&panel
+ , device, &ops
);
...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
If the panel is wrapped in a panel_bridge it gets prepar()ed before the
upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks
are not enabled yet). To avoid this move the panel's first DSI access to
enable() so the upstream bridge can prepare the DSI host controller in
it's pre_enable().
This is also in line with other panel drivers.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/12c3495b234952aafe11980a9e06cfd246134660.1564146727.git.agx@sigxcpu.org
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115717.GB26335@kroah.com
Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI
DSI video mode panel.
The panel seems to use a Sitronix ST7703 look alike (most of the
commands look similar to the ST7703's data sheet but use a different
number of parameters). The initial version of the DSI init sequence
(including sleeps) were provided by the vendor. Sleeps were reduced
considerably though to speed up initialization.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a9ce687be283c66dfb26d1dfb52a7bf695090fa.1554114302.git.agx@sigxcpu.org
