console_verbose() increases console loglevel to
CONSOLE_LOGLEVEL_MOTORMOUTH, which provides more information
to debug a panic/oops.
Unfortunately, in Arista we maintain some DUTs (Device Under Test) that
are configured to have 9600 baud rate. While verbose console messages
have their value to post-analyze crashes, on such setup they:
- may prevent panic/oops messages being printed
- take too long to flush on console resulting in watchdog reboot
In all our setups we use kdump which saves dmesg buffer after panic,
so in reality those extra messages on console provide no additional value,
but rather add risk of not getting to __crash_kexec().
Provide printk.console_no_auto_verbose boot parameter, which allows
to switch off printk being verbose on oops/panic/lockdep.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210727130635.675184-3-dima@arista.com
Syslog's SYSLOG_ACTION_READ is supposed to block until the next
syslog record can be read, and then it should read that record.
However, because @syslog_lock is not held between waking up and
reading the record, another reader could read the record first,
thus causing SYSLOG_ACTION_READ to return with a value of 0, never
having read _anything_.
By holding @syslog_lock between waking up and reading, it can be
guaranteed that SYSLOG_ACTION_READ blocks until it successfully
reads a syslog record (or a real error occurs).
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-7-john.ogness@linutronix.de
@syslog_lock was a raw_spin_lock to simplify the transition of
removing @logbuf_lock and the safe buffers. With that transition
complete, and since all uses of @syslog_lock are within sleepable
contexts, @syslog_lock can become a mutex.
Note that until now register_console() would disable interrupts
using irqsave, which implies that it may be called with interrupts
disabled. And indeed, there is one possible call chain on parisc
where this happens:
handle_interruption(code=1) /* High-priority machine check (HPMC) */
pdc_console_restart()
pdc_console_init_force()
register_console()
However, register_console() calls console_lock(), which might sleep.
So it has never been allowed to call register_console() from an
atomic context and the above call chain is a bug.
Note that the removal of read_syslog_seq_irq() is slightly changing
the behavior of SYSLOG_ACTION_READ by testing against a possibly
outdated @seq value. However, the value of @seq could have changed
after the test, so it is not a new window. A follow-up commit closes
this window.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-6-john.ogness@linutronix.de
With @logbuf_lock removed, the high level printk functions for
storing messages are lockless. Messages can be stored from any
context, so there is no need for the NMI and safe buffers anymore.
Remove the NMI and safe buffers.
Although the safe buffers are removed, the NMI and safe context
tracking is still in place. In these contexts, store the message
immediately but still use irq_work to defer the console printing.
Since printk recursion tracking is in place, safe context tracking
for most of printk is not needed. Remove it. Only safe context
tracking relating to the console and console_owner locks is left
in place. This is because the console and console_owner locks are
needed for the actual printing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-4-john.ogness@linutronix.de
Currently the printk safe buffers provide a form of recursion
protection by redirecting to the safe buffers whenever printk() is
recursively called.
In preparation for removal of the safe buffers, provide an alternate
explicit recursion protection. Recursion is limited to 3 levels
per-CPU and per-context.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-3-john.ogness@linutronix.de
Commit 3370155737 ("printk: Userspace format indexing support") turned
printk() into a macro, but left the kerneldoc comment for it with the (now)
_printk() function, resulting in this docs-build warning:
kernel/printk/printk.c:1: warning: 'printk' not found
Move the kerneldoc comment back next to the (now) macro it's meant to
describe and have the docs build find it there.
Fixes: 3370155737 ("printk: Userspace format indexing support")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87o8aqt7qn.fsf@meer.lwn.net
We have a number of systems industry-wide that have a subset of their
functionality that works as follows:
1. Receive a message from local kmsg, serial console, or netconsole;
2. Apply a set of rules to classify the message;
3. Do something based on this classification (like scheduling a
remediation for the machine), rinse, and repeat.
As a couple of examples of places we have this implemented just inside
Facebook, although this isn't a Facebook-specific problem, we have this
inside our netconsole processing (for alarm classification), and as part
of our machine health checking. We use these messages to determine
fairly important metrics around production health, and it's important
that we get them right.
While for some kinds of issues we have counters, tracepoints, or metrics
with a stable interface which can reliably indicate the issue, in order
to react to production issues quickly we need to work with the interface
which most kernel developers naturally use when developing: printk.
Most production issues come from unexpected phenomena, and as such
usually the code in question doesn't have easily usable tracepoints or
other counters available for the specific problem being mitigated. We
have a number of lines of monitoring defence against problems in
production (host metrics, process metrics, service metrics, etc), and
where it's not feasible to reliably monitor at another level, this kind
of pragmatic netconsole monitoring is essential.
As one would expect, monitoring using printk is rather brittle for a
number of reasons -- most notably that the message might disappear
entirely in a new version of the kernel, or that the message may change
in some way that the regex or other classification methods start to
silently fail.
One factor that makes this even harder is that, under normal operation,
many of these messages are never expected to be hit. For example, there
may be a rare hardware bug which one wants to detect if it was to ever
happen again, but its recurrence is not likely or anticipated. This
precludes using something like checking whether the printk in question
was printed somewhere fleetwide recently to determine whether the
message in question is still present or not, since we don't anticipate
that it should be printed anywhere, but still need to monitor for its
future presence in the long-term.
This class of issue has happened on a number of occasions, causing
unhealthy machines with hardware issues to remain in production for
longer than ideal. As a recent example, some monitoring around
blk_update_request fell out of date and caused semi-broken machines to
remain in production for longer than would be desirable.
Searching through the codebase to find the message is also extremely
fragile, because many of the messages are further constructed beyond
their callsite (eg. btrfs_printk and other module-specific wrappers,
each with their own functionality). Even if they aren't, guessing the
format and formulation of the underlying message based on the aesthetics
of the message emitted is not a recipe for success at scale, and our
previous issues with fleetwide machine health checking demonstrate as
much.
This provides a solution to the issue of silently changed or deleted
printks: we record pointers to all printk format strings known at
compile time into a new .printk_index section, both in vmlinux and
modules. At runtime, this can then be iterated by looking at
<debugfs>/printk/index/<module>, which emits the following format, both
readable by humans and able to be parsed by machines:
$ head -1 vmlinux; shuf -n 5 vmlinux
# <level[,flags]> filename:line function "format"
<5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
<4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
<6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
<6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
<6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
This mitigates the majority of cases where we have a highly-specific
printk which we want to match on, as we can now enumerate and check
whether the format changed or the printk callsite disappeared entirely
in userspace. This allows us to catch changes to printks we monitor
earlier and decide what to do about it before it becomes problematic.
There is no additional runtime cost for printk callers or printk itself,
and the assembly generated is exactly the same.
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org> # for module.{c,h}
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/e42070983637ac5e384f17fbdbe86d19c7b212a5.1623775748.git.chris@chrisdown.name
parse_prefix is needed externally by later patches, so move it into a
context where it can be used as such. Also give it the printk_ prefix to
reduce the chance of collisions.
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/b22ba314a860e5c7f887958f1eab2649f9bd1d06.1623775748.git.chris@chrisdown.name
In the past, `enum log_flags` was part of `struct log`, hence the name.
`struct log` has since been reworked and now this struct is stored
inside `struct printk_info`. However, the name was never updated, which
is somewhat confusing -- especially since these flags operate at the
record level rather than at the level of an abstract log.
printk_info_flags also joins its other metadata struct friends in
printk_ringbuffer.h.
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/3dd801982f02603e6e3aa4f8bc4f5ebb830a4949.1623775748.git.chris@chrisdown.name
The standard printk() tries to flush the message to the console
immediately. It tries to take the console lock. If the lock is
already taken then the current owner is responsible for flushing
even the new message.
There is a small race window between checking whether a new message is
available and releasing the console lock. It is solved by re-checking
the state after releasing the console lock. If the check is positive
then console_unlock() tries to take the lock again and process the new
message as well.
The commit 996e966640 ("printk: remove logbuf_lock") causes that
console_seq is not longer read atomically. As a result, the re-check might
be done with an inconsistent 64-bit index.
Solve it by using the last sequence number that has been checked under
the console lock. In the worst case, it will take the lock again only
to realized that the new message has already been proceed. But it
was possible even before.
The variable next_seq is marked as __maybe_unused to call down compiler
warning when CONFIG_PRINTK is not defined.
Fixes: commit 996e966640 ("printk: remove logbuf_lock")
Reported-by: kernel test robot <lkp@intel.com> # unused next_seq warning
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20210702150657.26760-1-pmladek@suse.com
The cpu lock implementation uses a full memory barrier to take
the lock, but no memory barriers when releasing the lock. This
means that changes performed by a lock owner may not be seen by
the next lock owner. This may have been "good enough" for use
by dump_stack() as a serialization mechanism, but it is not
enough to provide proper protection for a critical section.
Correct this problem by using acquire/release memory barriers
for lock/unlock, respectively.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210617095051.4808-3-john.ogness@linutronix.de
dump_stack() implements its own cpu-reentrant spinning lock to
best-effort serialize stack traces in the printk log. However,
there are other functions (such as show_regs()) that can also
benefit from this serialization.
Move the cpu-reentrant spinning lock (cpu lock) into new helper
functions printk_cpu_lock_irqsave()/printk_cpu_unlock_irqrestore()
so that it is available for others as well. For !CONFIG_SMP the
cpu lock is a NOP.
Note that having multiple cpu locks in the system can easily
lead to deadlock. Code needing a cpu lock should use the
printk cpu lock, since the printk cpu lock could be acquired
from any code and any context.
Also note that it is not necessary for a cpu lock to disable
interrupts. However, in upcoming work this cpu lock will be used
for emergency tasks (for example, atomic consoles during kernel
crashes) and any interruptions while holding the cpu lock should
be avoided if possible.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Backported on top of 5.13-rc1.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210617095051.4808-2-john.ogness@linutronix.de
s/sempahore/semaphore/
s/exacly/exactly/
s/unregistred/unregistered/
s/interation/iteration/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Removed 4th hunk. The string has already been removed in the meantime.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210328043932.8310-1-unixbhaskar@gmail.com
The printk code is already hard enough to understand. Remove an
unnecessary indirection by renaming vprintk_func to vprintk (adding
the asmlinkage annotation), and removing the vprintk definition from
printk.c. That way, printk is implemented in terms of vprintk as one
would expect, and there's no "vprintk_func, what's that? Some function
pointer that gets set where?"
The declaration of vprintk in linux/printk.h already has the
__printf(1,0) attribute, there's no point repeating that with the
definition - it's for diagnostics in callers.
linux/printk.h already contains a static inline {return 0;} definition
of vprintk when !CONFIG_PRINTK.
Since the corresponding stub definition of vprintk_func was not marked
"static inline", any translation unit including internal.h would get a
definition of vprintk_func - it just so happens that for
!CONFIG_PRINTK, there is precisely one such TU, namely printk.c. Had
there been more, it would be a link error; now it's just a silly waste
of a few bytes of .text, which one must assume are rather precious to
anyone disabling PRINTK.
$ objdump -dr kernel/printk/printk.o
00000330 <vprintk_func>:
330: 31 c0 xor %eax,%eax
332: c3 ret
333: 8d b4 26 00 00 00 00 lea 0x0(%esi,%eiz,1),%esi
33a: 8d b6 00 00 00 00 lea 0x0(%esi),%esi
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210323144201.486050-1-linux@rasmusvillemoes.dk
Upon registering a console, safe buffers are activated when setting
up the sequence number to replay the log. However, these are already
protected by @console_sem and @syslog_lock. Remove the unnecessary
safe buffer usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-16-john.ogness@linutronix.de
kmsg_dump_rewind() and kmsg_dump_get_line() are lockless, so there is
no need for _nolock() variants. Remove these functions and switch all
callers of the _nolock() variants.
The functions without _nolock() were chosen because they are already
exported to kernel modules.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-15-john.ogness@linutronix.de
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock.
@console_seq, @exclusive_console_stop_seq, @console_dropped are
protected by @console_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-14-john.ogness@linutronix.de
Rather than storing the iterator information in the registered
kmsg_dumper structure, create a separate iterator structure. The
kmsg_dump_iter structure can reside on the stack of the caller, thus
allowing lockless use of the kmsg_dump functions.
Update code that accesses the kernel logs using the kmsg_dumper
structure to use the new kmsg_dump_iter structure. For kmsg_dumpers,
this also means adding a call to kmsg_dump_rewind() to initialize
the iterator.
All this is in preparation for removal of @logbuf_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org> # pstore
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de
All 6 kmsg_dumpers do not benefit from the @active flag:
(provide their own synchronization)
- arch/powerpc/kernel/nvram_64.c
- arch/um/kernel/kmsg_dump.c
- drivers/mtd/mtdoops.c
- fs/pstore/platform.c
(only dump on KMSG_DUMP_PANIC, which does not require
synchronization)
- arch/powerpc/platforms/powernv/opal-kmsg.c
- drivers/hv/vmbus_drv.c
The other 2 kmsg_dump users also do not rely on @active:
(hard-code @active to always be true)
- arch/powerpc/xmon/xmon.c
- kernel/debug/kdb/kdb_main.c
Therefore, @active can be removed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-12-john.ogness@linutronix.de
The global variables @syslog_seq, @syslog_partial, @syslog_time
and write access to @clear_seq are protected by @logbuf_lock.
Once @logbuf_lock is removed, these variables will need their
own synchronization method. Introduce @syslog_lock for this
purpose.
@syslog_lock is a raw_spin_lock for now. This simplifies the
transition to removing @logbuf_lock. Once @logbuf_lock and the
safe buffers are removed, @syslog_lock can change to spin_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-11-john.ogness@linutronix.de
@user->seq is indirectly protected by @logbuf_lock. Once @logbuf_lock
is removed, @user->seq will be no longer safe from an atomicity point
of view.
In preparation for the removal of @logbuf_lock, change it to
atomic64_t to provide this safety.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-10-john.ogness@linutronix.de
kmsg_dump_rewind_nolock() locklessly reads @clear_seq. However,
this is not done atomically. Since @clear_seq is 64-bit, this
cannot be an atomic operation for all platforms. Therefore, use
a seqcount_latch to allow readers to always read a consistent
value.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-9-john.ogness@linutronix.de
Instead of using "LOG_LINE_MAX + PREFIX_MAX" for temporary buffer
sizes, introduce CONSOLE_LOG_MAX. This represents the maximum size
that is allowed to be printed to the console for a single record.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-8-john.ogness@linutronix.de
The logic for finding records to fit into a buffer is the same for
kmsg_dump_get_buffer() and syslog_print_all(). Introduce a helper
function find_first_fitting_seq() to handle this logic.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-7-john.ogness@linutronix.de
kmsg_dump_get_buffer() requires nearly the same logic as
syslog_print_all(), but uses different variable names and
does not make use of the ringbuffer loop macros. Modify
kmsg_dump_get_buffer() so that the implementation is as similar
to syslog_print_all() as possible.
A follow-up commit will move this common logic into a
separate helper function.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-6-john.ogness@linutronix.de
The second loop of syslog_print_all() subtracts lengths that were
added in the first loop. With commit b031a684bf ("printk: remove
logbuf_lock writer-protection of ringbuffer") it is possible that
records are (over)written during syslog_print_all(). This allows the
possibility of the second loop subtracting lengths that were never
added in the first loop.
This situation can result in syslog_print_all() filling the buffer
starting from a later record, even though there may have been room
to fit the earlier record(s) as well.
Fixes: b031a684bf ("printk: remove logbuf_lock writer-protection of ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-4-john.ogness@linutronix.de
If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.
The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.
For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: J. Avila <elavila@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de
Commit f0e386ee0c ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
Before the commit 896fbe20b4 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
kmsg_dump_get_buffer() uses @syslog to determine if the syslog
prefix should be written to the buffer. However, when calculating
the maximum number of records that can fit into the buffer, it
always counts the bytes from the syslog prefix.
Use @syslog when calculating the maximum number of records that can
fit into the buffer.
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de
-----BEGIN PGP SIGNATURE-----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=1gUa
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Finally allow parallel writes and reads into/from the lockless
ringbuffer. But it is not a complete solution. Readers are still
serialized against each other. And nested writes are still prevented
by printk_safe per-CPU buffers.
- Use ttynull as the ultimate fallback for /dev/console.
- Officially allow disabling console output by using console="" or
console=null
- A few code cleanups
* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: remove logbuf_lock writer-protection of ringbuffer
printk: inline log_output(),log_store() in vprintk_store()
printk: remove obsolete dead assignment
printk/console: Allow to disable console output by using console="" or console=null
init/console: Use ttynull as a fallback when there is no console
printk: ringbuffer: Reference text_data_ring directly in callees.
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock writer-protection of
the ringbuffer. The reader-protection is not removed because some
variables, used by readers, are using @logbuf_lock for synchronization:
@syslog_seq, @syslog_time, @syslog_partial, @console_seq,
struct kmsg_dumper.
For PRINTK_NMI_DIRECT_CONTEXT_MASK, @logbuf_lock usage is not removed
because it may be used for dumper synchronization.
Without @logbuf_lock synchronization of vprintk_store() it is no
longer possible to use the single static buffer for temporarily
sprint'ing the message. Instead, use vsnprintf() to determine the
length and perform the real vscnprintf() using the area reserved from
the ringbuffer. This leads to suboptimal packing of the message data,
but will result in less wasted storage than multiple per-cpu buffers
to support lockless temporary sprint'ing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201209004453.17720-3-john.ogness@linutronix.de
In preparation for removing logbuf_lock, inline log_output()
and log_store() into vprintk_store(). This will simplify dealing
with the various code branches and fallbacks that are possible.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201209004453.17720-2-john.ogness@linutronix.de
Commit 849f3127bb ("switch /dev/kmsg to ->write_iter()") refactored
devkmsg_write() and left over a dead assignment on the variable 'len'.
Hence, make clang-analyzer warns:
kernel/printk/printk.c:744:4: warning: Value stored to 'len' is never read
[clang-analyzer-deadcode.DeadStores]
len -= endp - line;
^
Simply remove this obsolete dead assignment here.
Link: https://lore.kernel.org/r/20201130124915.7573-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Fixes: f5f022e53b ("printk: reimplement log_cont using record extension")
Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The commit 48021f9813 ("printk: handle blank console arguments
passed in.") prevented crash caused by empty console= parameter value.
Unfortunately, this value is widely used on Chromebooks to disable
the console output. The above commit caused performance regression
because the messages were pushed on slow console even though nobody
was watching it.
Use ttynull driver explicitly for console="" and console=null
parameters. It has been created for exactly this purpose.
It causes that preferred_console is set. As a result, ttySX and ttyX
are not used as a fallback. And only ttynull console gets registered by
default.
It still allows to register other consoles either by additional console=
parameters or SPCR. It prevents regression because it worked this way even
before. Also it is a sane semantic. Preventing output on all consoles
should be done another way, for example, by introducing mute_console
parameter.
Link: https://lore.kernel.org/r/20201006025935.GA597@jagdpanzerIV.localdomain
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201111135450.11214-3-pmladek@suse.com
@setup_text_buf only copies the original text messages (without any
prefix or extended text). It only needs to be LOG_LINE_MAX in size.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200930090134.8723-3-john.ogness@linutronix.de
If a reader provides a buffer that is smaller than the message text,
the @text_len field of @info will have a value larger than the buffer
size. If readers blindly read @text_len bytes of data without
checking the size, they will read beyond their buffer.
Add this check to record_print_text() to properly recognize when such
truncation has occurred.
Add a maximum size argument to the ringbuffer function to extend
records so that records can not be created that are larger than the
buffer size of readers.
When extending records (LOG_CONT), do not extend records beyond
LOG_LINE_MAX since that is the maximum size available in the buffers
used by consoles and syslog.
Fixes: f5f022e53b ("printk: reimplement log_cont using record extension")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200930090134.8723-2-john.ogness@linutronix.de
Since there is no code that will ever store anything into the dict
ring, remove it. If any future dictionary properties are to be
added, these should be added to the struct printk_info.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-4-john.ogness@linutronix.de
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
The majority of the size of a descriptor is taken up by meta data,
which is often not of interest to the ringbuffer (for example,
when performing state checks). Since descriptors are often
temporarily stored on the stack, keeping their size minimal will
help reduce stack pressure.
Rather than embedding the printk_info into the descriptor, create
a separate printk_info array. The index of a descriptor in the
descriptor array corresponds to the printk_info with the same
index in the printk_info array. The rules for validity of a
printk_info match the existing rules for the data blocks: the
descriptor must be in a consistent state.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-2-john.ogness@linutronix.de
Use the record extending feature of the ringbuffer to implement
continuous messages. This preserves the existing continuous message
behavior.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-7-john.ogness@linutronix.de
prb_reserve() will set some meta data values and leave others
uninitialized (or rather, containing the values of the previous
wrap). Simplify the API by always clearing out all the fields.
Only the sequence number is filled in. The caller is now
responsible for filling in the rest of the meta data fields.
In particular, for correctly filling in text and dict lengths.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-4-john.ogness@linutronix.de
-----BEGIN PGP SIGNATURE-----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=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
The commit 625d344978 ("Revert "kernel/printk: add kmsg SEEK_CUR
handling"") reverted a change done to the return value in case a SEEK_CUR
operation was performed for kmsg buffer based on the fact that different
userspace apps were handling the new return value (-ESPIPE) in different
ways, breaking them.
At the same time -ESPIPE was the wrong decision because kmsg /does support/
seek() but doesn't follow the "normal" behavior userspace is used to.
Because of that and also considering the time -EINVAL has been used, it was
decided to keep this way to avoid more userspace breakage.
This patch adds an official statement to the kmsg documentation pointing to
the current return value for SEEK_CUR, -EINVAL, thus userspace libraries
and apps can refer to it for a definitive guide on what to expect.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710174423.10480-1-bmeneg@redhat.com
Replace the existing ringbuffer usage and implementation with
lockless ringbuffer usage. Even though the new ringbuffer does not
require locking, all existing locking is left in place. Therefore,
this change is purely replacing the underlining ringbuffer.
Changes that exist due to the ringbuffer replacement:
- The VMCOREINFO has been updated for the new structures.
- Dictionary data is now stored in a separate data buffer from the
human-readable messages. The dictionary data buffer is set to the
same size as the message buffer. Therefore, the total required
memory for both dictionary and message data is
2 * (2 ^ CONFIG_LOG_BUF_SHIFT) for the initial static buffers and
2 * log_buf_len (the kernel parameter) for the dynamic buffers.
- Record meta-data is now stored in a separate array of descriptors.
This is an additional 72 * (2 ^ (CONFIG_LOG_BUF_SHIFT - 5)) bytes
for the static array and 72 * (log_buf_len >> 5) bytes for the
dynamic array.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-5-john.ogness@linutronix.de
This reverts commit 3ac37a93fa.
This optimization will not apply once the transition to a lockless
printk is complete. Rather than porting this optimization through
the transition only to remove it anyway, just revert it now to
simplify the transition.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-4-john.ogness@linutronix.de
I bet the word 'chance' has to be used in 'had a chance to be called',
but, alas, I'm not native speaker...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618164751.56828-7-andriy.shevchenko@linux.intel.com
Since console ->setup() hook returns meaningful error codes,
propagate it to the caller of try_enable_new_console().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618164751.56828-6-andriy.shevchenko@linux.intel.com
This reverts commit 8ece3b3eb5.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=+1iq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
"One more printk change for 5.8: make sure that messages printed from
KDB context are redirected to KDB console handlers. It did not work
when KDB interrupted NMI or printk_safe contexts.
Arm people started hitting this problem more often recently. I forgot
to add the fix into the previous pull request by mistake"
* tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/kdb: Redirect printk messages into kdb in any context
kdb has to get messages on consoles even when the system is stopped.
It uses kdb_printf() internally and calls console drivers on its own.
It uses a hack to reuse an existing code. It sets "kdb_trap_printk"
global variable to redirect even the normal printk() into the
kdb_printf() variant.
The variable "kdb_trap_printk" is checked in printk_default() and
it is ignored when printk is redirected to printk_safe in NMI context.
Solve this by moving the check into printk_func().
It is obvious that it is not fully safe. But it does not make things
worse. The console drivers are already called in this context by
db_printf() direct calls.
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200520102233.GC3464@linux-b0ei
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl7U1TIACgkQUqAMR0iA
lPI0mQ//TcVlRJgts/iwv0M2Simje28t9tziOHgWmEeiyGwE7vwDPDzt8QFiKzBa
IrJ5iTRMtCrEF+eapqeH4g+Ve4Npm5Cobl8/h9JEiVu3SNC48TuaiUzU3+Bfl1zV
vcDfZtN9QD1/CdLGlyKO75xjkCOaJRCFnx5ToXnd3llshMKI2XebUCnEH4TDe6Fz
NGTjJL4kCPwzmae++UhlMfKwkayBtNbqcLkaTb7d67Tw2DcuuIVixUER77oC9QPN
SfxdS07s0UVc4C9bCVe3KtYZR5YU/riOjKNJNutzP3JDtQNugywrrtI0qBwEisqM
puMJ3xLeLssTn10FJxRK9ewRlXy2zT9mmcCuaVU6LtiyGnHOuEwIU+Ewu0itiJGu
JuFovsNqTvOiZqFP7+pkDktOjffF2hsY/a6NxHr6aof8CrdO2w9dmCAgzGvnwV1N
/zlmmPSEigVLz47eeivIIdQrPUejrEV7g1wOYYApnIlNCmGjdkGnXKNaUrLGDehQ
QIlpx1uvmhntjiw1hTSbOV7KOQxLGtuy6DWLYC7uHD3H3aGDQyQO8dZYXSfOY1Qu
cvQ/K8ykW0Kq2JKEHjkwSRHKDpxhvbQg7N5JCHQA49ahdZD3O5bOfeTofw+7nFO0
j9g2Qv6nWFjLbAIAFtqjh6wz0UtGNoTl2cqQswsS10wlDcsq8vs=
=pUBG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
kmsg_dump() allows to dump kmesg buffer for various system events: oops,
panic, reboot, etc. It provides an interface to register a callback
call for clients, and in that callback interface there is a field
"max_reason", but it was getting ignored when set to any "reason"
higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as
kernel parameter.
Allow clients to actually control their "max_reason", and keep the
current behavior when "max_reason" is not set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
If uboot passes a blank string to console_setup then it results in
a trashed memory. Ultimately, the kernel crashes during freeing up
the memory.
This fix checks if there is a blank parameter being
passed to console_setup from uboot. In case it detects that
the console parameter is blank then it doesn't setup the serial
device and it gracefully exits.
Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation
over any file descriptor requested to make sure the current position isn't
pointing to junk due to previous manipulation of that same fd. And whenever
that fd doesn't have support for such operation, the userspace code expects
-ESPIPE to be returned.
However, when the fd in question references the /dev/kmsg interface, the
current kernel code state returns -EINVAL instead, causing an unexpected
behavior in userspace: in the case of glibc, when -ESPIPE is returned it
gets ignored and the call completes successfully, while returning -EINVAL
forces dprintf to fail without performing any action over that fd:
if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) ==
_IO_pos_BAD && errno != ESPIPE)
return NULL;
With this patch we make sure to return the correct value when SEEK_CUR is
requested over kmsg and also add some kernel doc information to formalize
this behavior.
Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org,
Cc: David.Laight@ACULAB.COM
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is a typo in comment, fix it.
Signed-off-by: Ethon Paul <ethp@qq.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit 1b710b1b10 ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.
The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).
Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.
Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/
Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CON_CONSDEV flag was historically used to put/keep the preferred console
first in console_drivers list. Where the preferred console is the last
on the command line.
The ordering is important only when opening /dev/console:
+ tty_kopen()
+ tty_lookup_driver()
+ console_device()
The flag was originally an implementation detail. But it was later
made accessible from userspace via /proc/consoles. It was used,
for example, by the tool "showconsole" to show the real tty
accessible via /dev/console, see
https://github.com/bitstreamout/showconsole
Now, the current code sets CON_CONSDEV only for the preferred
console or when a fallback console is added. The flag is not
set when the preferred console is defined on the command line
but it is not registered from some reasons.
Simple solution is to set CON_CONSDEV flag for the first
registered console. It will work most of the time because:
+ Most real consoles have console->device defined.
+ Boot consoles are removed in printk_late_init().
+ unregister_console() moves CON_CONSDEV flag to the next
console.
Clean solution would require checking con->device when the
preferred console is registered and in unregister_console().
Conclusion:
Use the simple solution for now. It is better than the current
state and good enough.
The clean solution is not worth it. It would complicate the already
complicated code without too much gain. Instead the code would deserve
a complete rewrite.
Link: https://lore.kernel.org/r/20200213095133.23176-4-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[pmladek@suse.com: Correct reasoning in the commit message, comment update.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
In the following circumstances, the rule of selecting the console
corresponding to the last "console=" entry on the command line as
the preferred console (CON_CONSDEV, ie, /dev/console) fails. This
is a specific example, but it could happen with different consoles
that have a similar name aliasing mechanism.
- The kernel command line has both console=tty0 and console=ttyS0
in that order (the latter with speed etc... arguments).
This is common with some cloud setups such as Amazon Linux.
- add_preferred_console is called early to register "uart0". In
our case that happens from acpi_parse_spcr() on arm64 since the
"enable_console" argument is true on that architecture. This causes
"uart0" to become entry 0 of the console_cmdline array.
Now, because of the above, what happens is:
- add_preferred_console is called by the cmdline parsing for tty0
and ttyS0 respectively, thus occupying entries 1 and 2 of the
console_cmdline array (since this happens after ACPI SPCR parsing).
At that point preferred_console is set to 2 as expected.
- When the tty layer kicks in, it will call register_console for tty0.
This will match entry 1 in console_cmdline array. It isn't our
preferred console but because it's our only console at this point,
it will end up "first" in the consoles list.
- When 8250 probes the actual serial port later on, it calls
register_console for ttyS0. At that point the loop in register_console
tries to match it with the entries in the console_cmdline array.
Ideally this should match ttyS0 in entry 2, which is preferred, causing
it to be inserted first and to replace tty0 as CONSDEV. However, 8250
provides a "match" hook in its struct console, and that hook will match
"uart" as an alias to "ttyS". So we match uart0 at entry 0 in the array
which is not the preferred console and will not match entry 2 which is
since we break out of the loop on the first match. As a result,
we don't set CONSDEV and don't insert it first, but second in
the console list.
As a result, we end up with tty0 remaining first in the array, and thus
/dev/console going there instead of the last user specified one which
is ttyS0.
This tentative fix register_console() to scan first for consoles
specified on the command line, and only if none is found, to then
scan for consoles specified by the architecture.
Link: https://lore.kernel.org/r/20200213095133.23176-3-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This moves the loop that tries to match a newly registered console
with the command line or add_preferred_console list into a separate
helper, in order to be able to call it multiple times in subsequent
patches.
Link: https://lore.kernel.org/r/20200213095133.23176-2-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
When CONFIG_PRINTK is disabled (e.g. when building allnoconfig), clang
warns:
../kernel/printk/printk.c:2416:10: warning: 'sprintf' will always
overflow; destination buffer has size 0, but format string expands to at
least 33 [-Wfortify-source]
len = sprintf(text,
^
1 warning generated.
It is not wrong; text has a zero size when CONFIG_PRINTK is disabled
because LOG_LINE_MAX and PREFIX_MAX are both zero. Change to snprintf so
that this case is explicitly handled without any risk of overflow.
Link: https://github.com/ClangBuiltLinux/linux/issues/846
Link: 6d485ff455
Link: http://lkml.kernel.org/r/20200130221644.2273-1-natechancellor@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Some consoles might require special operations on unregistering.
For instance, serial console, when registered in the kernel,
keeps power on for entire time, until it gets unregistered.
Example of use:
->setup(console):
pm_runtime_get(...);
->exit(console):
pm_runtime_put(...);
For such cases to have a balance we would provide ->exit() callback.
Link: http://lkml.kernel.org/r/20200203133130.11591-7-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
If console is not on the list then there is nothing for us to do
and sysfs notify is pointless.
Note, that nr_ext_console_drivers is being changed only for listed
consoles.
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20200203133130.11591-6-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There are only two callers that use the returned code from
unregister_console():
- unregister_early_console() in arch/m68k/kernel/early_printk.c
- kgdb_unregister_nmi_console() in drivers/tty/serial/kgdb_nmi.c
They both expect to get "0" on success and a non-zero value on error.
But the current behavior is confusing and buggy:
- _braille_unregister_console() returns "1" on success
- unregister_console() returns "1" on error
Fix and clean up the behavior:
- Return success when _braille_unregister_console() succeeded
- Return a meaningful error code when the console was
not registered before
Link: http://lkml.kernel.org/r/20200203133130.11591-5-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
/* find the last or real console */
This comment is misleading. The purpose of the loop is to check
if we are trying to register boot console after a real one has
already been registered. This is already mentioned in a comment
above.
Link: http://lkml.kernel.org/r/20200203133130.11591-4-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[pmladek@suse.com: Updated commit message.]
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
We have rather open coded single linked list manipulations where we may
simple use for_each_console() helper with properly set exit conditions.
Replace open coded single-linked list handling with for_each_console()
helper in use.
Link: http://lkml.kernel.org/r/20200203133130.11591-3-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is no need to explicitly check for console_drivers to be non-NULL
since for_each_console() does this.
Link: http://lkml.kernel.org/r/20200203133130.11591-2-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Commit f92b070f2d ("printk: Do not miss new messages when replaying
the log") introduced a new variable @exclusive_console_stop_seq to
store when an exclusive console should stop printing. It should be
set to the @console_seq value at registration. However, @console_seq
is previously set to @syslog_seq so that the exclusive console knows
where to begin. This results in the exclusive console immediately
reactivating all the other consoles and thus repeating the messages
for those consoles.
Set @console_seq after @exclusive_console_stop_seq has stored the
current @console_seq value.
Fixes: f92b070f2d ("printk: Do not miss new messages when replaying the log")
Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull irq updates from Ingo Molnar:
"Most of the IRQ subsystem changes in this cycle were irq-chip driver
updates:
- Qualcomm PDC wakeup interrupt support
- Layerscape external IRQ support
- Broadcom bcm7038 PM and wakeup support
- Ingenic driver cleanup and modernization
- GICv3 ITS preparation for GICv4.1 updates
- GICv4 fixes
There's also the series from Frederic Weisbecker that fixes memory
ordering bugs for the irq-work logic, whose primary fix is to turn
work->irq_work.flags into an atomic variable and then convert the
complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
much simpler atomic_fetch_or() call.
There are also various smaller cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
pinctrl/msm: Setup GPIO chip in hierarchy
irqchip/qcom-pdc: Add irqchip set/get state calls
irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
irqchip/qcom-pdc: Update max PDC interrupts
of/irq: Document properties for wakeup interrupt parent
genirq: Introduce irq_chip_get/set_parent_state calls
irqdomain: Add bus token DOMAIN_BUS_WAKEUP
genirq: Fix function documentation of __irq_alloc_descs()
irq_work: Fix IRQ_WORK_BUSY bit clearing
irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
irq_work: Slightly simplify IRQ_WORK_PENDING clearing
irq_work: Fix irq_work_claim() memory ordering
irq_work: Convert flags to atomic_t
irqchip: Ingenic: Add process for more than one irq at the same time.
irqchip: ingenic: Alloc generic chips from IRQ domain
irqchip: ingenic: Get virq number from IRQ domain
irqchip: ingenic: Error out if IRQ domain creation failed
irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
...
We need to convert flags to atomic_t in order to later fix an ordering
issue on atomic_cmpxchg() failure. This will allow us to use atomic_fetch_or().
Also clarify the nature of those flags.
[ mingo: Converted two more usage site the original patch missed. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
strncmp(str, const, len) is error-prone because len is easy to have typo.
An example is the hard-coded len has counting error or sizeof(const)
forgets - 1.
So we prefer using newly introduced str_has_prefix() to substitute
such strncmp() to make code better.
Link: http://lkml.kernel.org/r/20190809071034.17279-1-hslester96@gmail.com
Cc: "Steven Rostedt" <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Slightly updated and reformatted the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
kmsg_dump_get_buffer() is supposed to select all the youngest log
messages which fit into the provided buffer. It determines the correct
start index by using msg_print_text() with a NULL buffer to calculate
the size of each entry. However, when performing the actual writes,
msg_print_text() only writes the entry to the buffer if the written len
is lesser than the size of the buffer. So if the lengths of the
selected youngest log messages happen to precisely fill up the provided
buffer, the last log message is not included.
We don't want to modify msg_print_text() to fill up the buffer and start
returning a length which is equal to the size of the buffer, since
callers of its other users, such as kmsg_dump_get_line(), depend upon
the current behaviour.
Instead, fix kmsg_dump_get_buffer() to compensate for this.
For example, with the following two final prints:
[ 6.427502] AAAAAAAAAAAAA
[ 6.427769] BBBBBBBB12345
A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this
patch:
00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37 <0>[ 6.522197
00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a ] AAAAAAAAAAAAA.
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
After this patch:
00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38 <0>[ 6.456678
00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a ] BBBBBBBB12345.
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Link: http://lkml.kernel.org/r/20190711142937.4083-1-vincent.whitchurch@axis.com
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
To: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.5+
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().
Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .
[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:
[ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[ 35.749975] ------------[ cut here ]------------
The above message are very useful for debugging.
But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:
WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
Call Trace:
<IRQ>
try_to_wake_up
default_wake_function
autoremove_wake_function
__wake_up_common
__wake_up_common_lock
__wake_up
wake_up_klogd_work_func
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
smp_apic_timer_interrupt
apic_timer_interrupt
For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.
Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.
Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.
To verify this, make sure kernel is not configured to reboot on panic and
in console
# echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.
Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJci4YTAAoJEH4ztj+gR8IL8jkP/0BkuxHS1ZCP/JAbah/yM838
yuULNSxsO5FqmoH7n7AqDZ8j0NttMEQirzxN7vv5QkZi6QxWVHIFMaxqQSB4DfMg
lLF9LFAL/tzKBc5f3dVnD2YzJpNpg715ncfY55Jz0o/as2RE9OLlmwxYGF1VRLIG
EsBjYm4b0iVCOSu2YxecNCfPoy2LhwdqM8dxXdVgyuDRqxwoD2giC5pNDQVUMvQ3
037S256DblvedGNdj7g0QmmdvOmsd8jjhE/hJmjrvIp43pHDuFSH9mRZufKTVF3l
kXIlrJahH35w/Fv2rdWM4PlmuAKBIm49NVaZFfCodjCLIBidPSWNctKQnhY71Skf
oJSqftgiApVIGweKXYQnFpw964LVe5q85xeVRj3zLr9LCuo4EhiP8ue58eFnwWud
FTLEgiWSlomrd98t2C6HEnEUMv6XlulI2mAMmqBTZmmV/Vm1hiwHkL6sMFLfuB1A
Ee1m6LIqMombGsUwkUmRRGqWNeunX1TETVDCXuPb9EyyigSaA1PDtANF9UzXWMNf
ZKU9Vz0Lq3TFuhr5PolLjiAvXgxf9YLk36VgCu9CoGh/GFpMqRGoDPQkGOxy81E9
FpXTk7A7XmtUiwX4Tfxy6RrRBBtZWwvuBP79/yyEpl+IVbES/nS6R8TekQp5jbZj
r/1Z8shbwO4hltu6z14X
=+ZFI
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v5.1' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Just a couple of small fixes and cleanups:
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)"
* tag 'fbdev-v5.1' of git://github.com/bzolnier/linux:
fbdev: mbx: fix a misspelled variable name
fbdev: omap2: fix warnings in dss core
video: fbdev: Fix potential NULL pointer dereference
fbcon: Silence fbcon logo on 'quiet' boots
printk: Export console_printk
ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity
video: ssd1307fb: Do not hard code active-low reset sequence
dt-bindings: display: ssd1307fb: Remove reset-active-low from examples
fbdev: fbmem: fix memory access if logo is bigger than the screen
video/fbdev: refactor video= cmdline parsing
fbdev: mbx: fix up debugfs file creation
fbdev: omap2: no need to check return value of debugfs_create functions
video: fbdev: geode: remove ifdef OLPC noise
video: offb: annotate implicit fall throughs
omapfb: fix typo
fbdev: Use of_node_name_eq for node name comparisons
fbcon: use kvmalloc() for scrollback buffer
fbdev: chipsfb: remove set but not used variable 'size'
fbdev/via: fix spelling mistake "Expandsion" -> "Expansion"
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.
Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com> [printk]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
