There several transitions to handle in eSR mode:
* SMPS should be disabled when in eSR mode
* indicate to the fw whether the new added link should use the
listen lmac or the main lmac
* RLC is offloaded when in eSR mode; adjust RLC command accordingly
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The max active links that are supported by the FW is hard coded.
This is wrong since this value is HW-dependent. Fix this by
determining according to the actual HW.
Also remove a redundant check that the number of active links
doesn't exceeds the maximum.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.
Fixes: abc599efa6 ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.
Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware technically only needs this when the link is
newly added, but it's much easier for debugging if it's
always available, so include it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When calling iwl_mvm_set_fw_qos_params() we explicitly pass
a pointer to the first array element, but the function will
treat it as an array. Simplify and clarify the code and pass
the array instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the data structure set up to store the parameters
per link, but weren't using them. Fix that and store them
in the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Again, during some (botched) FW restart scenarios we can end
up with a NULL link in the driver but mac80211 thinking all
is still going OK. If we try to TX at the same time, we can
crash there. Fix that by checking for a NULL link during TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've observed that in some botched firmware restart scenarios
when the firmware crashes again while we're reconfiguring, we
can hit NULL pointer crashes here. The underlying issue is the
botched restart which we need to fix separately, but until we
can do that, don't crash hard here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are evidently cases where the firmware completes the
reset but the interrupt isn't received correctly, so check
for the interrupt again after the timeout, and don't dump
the firmware error log if the right bit is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.
Fix that by disabling the softirqs across the TX call.
Fixes: cfbc6c4c5b ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't just dereference the sband->iftype_data pointer,
that's an array so we need to access the right entry. Use
the previously introduced helper functions to do that.
There are also cases, e.g. when loading with disable_11ax=1,
where the pointer might be NULL but we still attempt to use
it, causing a crash.
Fixes: 529281bdf0 ("iwlwifi: mvm: limit TLC according to our HE capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While vif pointers are protected by the corresponding "*active"
fields, static checkers can get confused sometimes. Add an explicit
check.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory blocks (they're only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.
This is a bit more complex since we normally don't enter into
the allocation function, but duplicating the logic didn't seem
enticing either, so rework the allocation a bit to always go
into the individual block allocation, but there clear if it's
already allocated, rather than allocating again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.30b82881cfbf.I39520aff8ac95ee64d39dc5913525a1efd7995fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_pcie_alloc_fw_monitor_block() function has an argument
that's only ever hard-coded to 11, remove it and hard-code the
value into the function itself with a comment.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.737c153e8259.Ibe6250ca812cfa2f00ac47e5e0d1595c6b9b4875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory block (it's only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.73c32255a132.Ibd7101dcd285b01ee879fddfbf52c30d49ced3c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Given the existing code in iwl_dbg_tlv_update_drams(), the
following can happen and cause firmware asserts, and even
the device to become unusable:
* We set the magic so the firmware will use the data;
* we try to fill multiple allocation IDs, with at least
one successful, but - crucially - one failing and thus
not touching the data;
* we don't clear the data since there was one success.
This doesn't seem like much of a problem just yet, however,
what happens now is that the allocation ID(s) that failed
are not initialized.
There are two additional things to know:
* we never free these allocations across FW restart or
interface down/up etc., in fact we never free them until
the driver is unbound from the device (e.g. unloaded)
* the firmware uses the DRAM info structure for real debug
data when it has used it completely
Given that, and the fact that we never initialize the data
on restart, we can be unlucky and end up with an allocation
that looks for the most part valid (valid ID, valid number
of buffers, etc.) but has bad sizes - causing the firmware
to throw an assert we can never recover from.
Fixing the code to have the entire buffers cleared (which
we should do so old debug data isn't sticking around) is a
bit more complex, so as a first step make the actual code
that fills the information more robust by clearing the
structure first, and filling the magic values only if it
actually succeeded for one, rather than doing it the other
way around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.87cf5528f4bc.I26ac907a4162297808b33467fc7f5d8177474a34@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newest firmware don't advertise the version of ADD_STA because it has
been replaced by another command. There are old firmware images
that also don't advertise it. Replace all the checks with a new
inline, and in that check for either MLD API or the ADD_STA
command version.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware only supports a single IGTK, and due to some
changes it really doesn't like to have multiple programmed
in later versions. Since only newer firmware cannot remove
a key that isn't present any more, adjust only the MLD API
code to keep track of the previous IGTK and remove it when
a new one is added.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.3fde1ef09270.I2e12a3b0bba4325c07dc8fcce39b711f158bd621@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_mvm_get_lmac_id() function is currently
defined as a static inline function under fw/api
and receives mvm's fw pointer. It will need the
ability to access other mvm struct members for
future capabilities such as debug. Move the function
out of the fw/api and into mvm proper as a regular
function and have it receive the pointer to mvm.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.507b2f9f64eb.I0ec91310e1911c33faf396b5e17bcb11a164f6ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add prints of ETSI and China bits.
Check if need to mask the China bit (when the firmware doesn't
support it) in a separate flow, so it will be easier to follow
the conditions. Add a separate message for the command version.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4ee455ec1ee8.I6f1a4b7dfa5cfd9b4f4a4b5bb5567849e629ae96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Initialize the phy_data.rx_vec for both version-3 and above
where it is 4-byte data size and below version which has
data size of 2-byte.
The data will be sent uninitialized in called function if
notification version is less than three.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.a6bb856f04bc.I9a15075f3dad61dcabdcd1ed0d34cf3e8ec5453f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we only need to support BTM rejection.
However, in the future we might want to support other BTM modes.
Rephrase its naming.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.ad20f10668d1.Icbb3fbae50b2302b97225b183dd336b02a4f37ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support new firmware that can validate the validate bits in
sniffer mode, and advertise that fact and the result of the
checks in the U-SIG radiotap field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.c20480aa1171.Icc0d077dae01d662ccb948823e196aa9c5c87976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware needs to know the esr_transtition_timeout to time the
transition between EMLSR and single radio with the AP.
Add the EMLSR support bit to the wiphy extended capabilities so that
it'll be sent in our association request frame. There are some
limitations in the implementation so we cannot use zero
padding/transition delay; fill the correct values.
Also, feed the medium_synchronization delay to the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.09fa06820d03.Ie9a9fd37d4948f8c5dd91161de254184b1a093c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some versions of the new hardware don't have a functional
version of the new offload method, but still have stricter
checks on the MAC header (MH) length in the offload assist
word. Include that even if checksumming isn't offloaded to
hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.bba713f7495a.Idbc8e3ce313b51af4060326e0191bd338b3163a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The program counter address is read from the TLV and
PC address is printed in debug messages.
Read the value at PC address and print the value
instead of the register address.
Fixes: 5e31b3df86 ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.e5a5f18f1b2c.Ib6117a4e7f66a075913241cc81477c0059953d5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The hardware, depending on which part fails or times out,
returns 0xA5A5A5A. or 0x5A5A5A5. with the lowest 4 bits
encoding some further reason/status. However, mostly we
don't really need to care about the exact reasons, so
unify the checks for this to avoid hardcoding those magic
values all over the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.3e2959741a38.I1c297a53787b87e4e2b8f296c041921338573f4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use flags field from struct ieee80211_tx_info in order to get
LDPC/STBC support. The rate parameter, used originally, is 16
bits only and does not have details of LDPC/STBC support.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.5a8856739b11.I6af4a55b22ed856f484ba77f87723dceec4904f2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.71a7070aecd7.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sta_init function can fail and if it returns an error then
driver should not send the request to fw to add a station.
Fixes: 69aef84805 ("wifi: iwlwifi: mvm: refactor iwl_mvm_add_sta(), iwl_mvm_rm_sta()")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.1ecd293539e8.I5ec6aab387bb2fe743a7402581beaeb9c801d31f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All of the station elements are really elements for the link. Create
them from the correct callback and return the link specific information
rather than always using the default link.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.a8e0c40d325e.I374d9433c3b8694667e1ce550d65f6f1f0d23c05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.4.0-rc5 #1 Not tainted
-----------------------------------------------------
kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7
and this task is already holding:
ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126
which would create a new lock dependency:
(&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&sta->rate_ctrl_lock){+.-.}-{2:2}
etc. etc. etc.
Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not
enough to pacify lockdep, but changing them all on pers.lock has worked.
Fixes: a8938bc881 ("wifi: iwlwifi: mvm: Add locking to the rate read flow")
Signed-off-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/79ffcc22-9775-cb6d-3ffd-1a517c40beef@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit b70813e4a8 ("wifi: iwlwifi: update response
for mcc_update command") since it causes a merge conflict, and it
seems easier to redo the patch later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 1bcbb1208e ("wifi: iwlwifi: mvm: FTM
initiator MLO support") as it causes a merge conflict, and
we can defer and re-do those changes later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When PNVM is obtained from UEFI, there's an additional memory
descriptor TLV that has to be handled. It is the same TLV that
holds data in the reduced power tables. Also, in this TLV, the
actual data is located after address and size, so add the
corresponding offset.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.8c5f5ee8e30b.Id1893c9dec140b5ba4abe8a121c2e1a1d121d2d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the field reduce_power_dram with a struct that holds data about
the reduced-power tables drams regions. Generalize load_payloads_segments()
to work for both pnvm tables and reduction power tables.
Make required adjustments in the data structures.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.6fe66958f049.I85d80682229fc02fe354462cc9da40937558f30c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generalize the parsing, loading, and setting of the power-reduce
tables, in order to support allocation of several DRAM payloads
in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.564f1eead99b.Iaba653b21dc09aafc72b9bbb3928abddce0db50a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take the part that copies the tables into DRAM, out of the method
that sets the prph_scratch to make the code cleaner. Each of the
operations will get more complex in the future when it will also
support larger power-reduce tables images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.7695684dc848.I13626cd318e5d68efec9618b2045f52788bff114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Save the pnvm payloads in several DRAM segments (not only in one as
used to). In addition, allocate a FW structure in DRAM that holds the
segments' addresses and forward its address to the FW. It's done when
FW has the capability to handle pnvm images this way (helps to process
large pnvm images).
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.dbdad8995ce1.I986213527982637042532de3851a1bd8a11be87a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change the field pnvm_dram to an array that describes many regions
and add a counter to the number of pnvm regions that were allocated
in DRAM.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.bb206d71bf45.I627640701757bb2f234f8e18a3afbd6af1206658@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change iwl_pnvm_parse so it will only save the information into the
iwl_pnvm_image struct. This enables to use the parsing code for the
power reduce tables in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.504b42fc1611.I4ddf6ad76d922d118fcbcc4f0e9ec003753d0b75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take the part that is copying the pnvm image into DRAM, out of the
the method that sets the prph_scratch. Makes the code cleaner since
those 2 operations don't always happen together (loading should happen
only once while setting can happen more than once).
In addition, each operation will get more complex in the future when
it will support also larger pnvm images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.4c0728239fd6.Ibc30a9fbdb6123dadbe2dbb89318dbd5ec01080a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generalize iwl_pnvm_parse(). This saves us from copying each payload
twice (first in the parsing and later when copying it to the dram).
Moreover, its more compatible for handling larger pnvm tables in
the future (in which payloads won't be concatenated).
The main changes are:
1. Take out the concatenating of the payloads from the parsing level
2. Start using iwl_pnvm_image structure that will hold pointers to
payloads that should be delivered to fw, their sizes and number.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.06c02f380b6f.I03a3030fca194aa0c4bc2ecd18531f8914e98cfd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Indicate to the firmware for each station whether or not MFP
is used with this station. Note that we indicate MFP for it
before authorized since we don't know yet, and that will make
the firmware not handle should-be-protected management frames
without being able to check them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601095201.b1052f39af4c.I1b46b751d5808e65ea3d0e7b8b38209c5aecf042@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's no peer configured then there's no point in sending
the command down to the firmware with an invalid peer address.
Fixes: cf85123a21 ("wifi: iwlwifi: mvm: support enabling and disabling HW timestamping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194630.0fb9f81f1852.Idcc41b67d1fbb421e5ed9bac2177b948b7b4d1c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This warning is sometimes happening if we force a FW error
while disconnecting, which is annoying but harmless.
However, it's also pointless to throw a warning here, since
the stack and driver state doesn't really help, so just
remove that so the driver will ignore the error if any.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194630.29fe6990d372.I00ff5dc7bfb4025a609f380a0a3911d842b72449@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are mainly two types of BTM (BSS Transition Management)
requests, recommendations and notifications. For the first type,
a response is needed otherwise, most probably the STA will be
disconnected.
Since we don't want to wake up the host on it, set the BTM to reject
offload flag (if the device supports it) and rely on the FW to take
care of it. The FW will reject the BTM request and in case the AP
sends DEAUTH the FW can wake up the host to let it decide on the
next steps.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.d95ae6f2804c.I9457acc55bc23ce715c714b5088058f52540c224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
DRAM buffers that are not defined in the TLVs (or are unused in the
preset) would cause a log message. To avoid confusion, skip processing
buffers with an invalid (i.e. uninitialized) DRAM path.
This further reduces the noise of the message in cases where it is
unlikely to be helpful. Also update a related debug log string to better
describe what is happening.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.ecae60cf2d7f.Ib44a94d4aeb55dbb2e52edea8b69a09bc0f722c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The feature is still disabled (depends on BROKEN), but
the code had a compilation error after one of the merges.
Fix that.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531085033.216028-1-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.fd9016f8f994.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Setting the station to -EBUSY was originally done under
this lock, and the comment still refers to it. But this
no longer happens because that was removed when DQA was
removed. Remove the leftover code as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.30048b1cd0fd.Ie2c2ff6fd7c6e3ebf5b736de350dc15515970792@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the following notifications and commands mac_id was replaced
with link_id:
* CANCEL_CHANNEL_SWITCH_CMD
* CHANNEL_SWITCH_START_NOTIF
* CHANNEL_SWITCH_ERROR_NOTIF
The logic around was not changed, so only adjust handling
mac/link id.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.6aa6e394f5fe.Ie9e78918511ca901f9f3966d774fa74a71a186e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware added new fields to be able to pass the link_id as the AP
knows it and the esr_transition_timeout.
For now, pass only the link_id since we don't have access to the
esr_transition_timeout yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.bf80ce717458.Icd4174911227c00cd12783fe1f517ae8097809b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the driver doesn't implement suspend or resume operations
on the transport layer, notify the driver's upper layer.
Otherwise, we might access d3_status uninitialized.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.0c55e0ca92f1.I6870fe1683215e65d3d036f9b576b03b7b7257be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When adding a PASN station, the non MLD API was used. This results
in assert when operating as MLD. Fix it to use the MLD API when
operating as MLD. For now, the default link is used for the added
station.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.7c35dccc8a12.I7bc78cd16d7c750f42fdd60e07e839a860d279d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
