This was completely bogus before, using maximum DCB device index rather
than maximum AUX ID to size the buffer that stores event refcounts.
*Pretty* unlikely to have been an actual problem on most configurations,
that is, unless you've got one of the rare boards that have off-chip DP.
There, it'll likely crash.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719044051.6975-1-skeggsb@gmail.com
- swiotlb cleanups (Petr Tesarik)
- use kvmalloc_array (gaoxu)
- a small step towards removing is_swiotlb_active (Christoph Hellwig)
- fix a Kconfig typo Sui Jingfeng)
-----BEGIN PGP SIGNATURE-----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=yYCS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- swiotlb cleanups (Petr Tesarik)
- use kvmalloc_array (gaoxu)
- a small step towards removing is_swiotlb_active (Christoph Hellwig)
- fix a Kconfig typo Sui Jingfeng)
* tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping:
drm/nouveau: stop using is_swiotlb_active
swiotlb: use the atomic counter of total used slabs if available
swiotlb: remove unused field "used" from struct io_tlb_mem
dma-remap: use kvmalloc_array/kvfree for larger dma memory remap
dma-mapping: fix a Kconfig typo
We changed the semantics for this in:
commit e761cc2094 ("drm/display/dp_mst: Handle old/new payload states in
drm_dp_remove_payload()")
But I totally forgot to update this properly in nouveau. So, let's do that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613210529.552098-1-lyude@redhat.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSPcdMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWrQH/3KmuvZsWMC4PpJY
VcF9VfF9i+Zv7DoG8sjD5VpNh47e87RsR6WNOFnKol5SUrM6vsBAb5i2rfQahNIv
NSj0fPCE4/Nj9LMecKVC9WD8CitxYdbR+CF9Is21AQj1VihUl9eHXGcAWxuaMyhk
TjPUwmbOOsRVMXXdGJzjX78cvLsxqpSv8A/5OTh16IBimbh7p+YjKJFkbfj/PMWf
aF1quFkIEXgzJcHCpP6KDZHr2KbpY+jIN9hUENnGKJxHYNso5u+KrIW1kAm8meP1
x26ETSquM0T70OAzovOWg+BeVkLDac/3Rh30ztLAI4AtajrlSzycvFsU9UNEJCc2
BnM2IZI=
=ANT5
-----END PGP SIGNATURE-----
Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-fixes maybe in time for v6.4-rc7:
- qaic leak and null deref fix.
- Fix runtime pm in nouveau.
- Fix array overflow in ti-sn65dsi86 pwm chip handling.
- Assorted null check fixes in nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/641eb8a8-fbd7-90ad-0805-310b7fec9344@lankhorst.se
This seems to have existed for ever but is now more apparant after
commit 9bff18d134 ("drm/ttm: use per BO cleanup workers")
My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.
The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.
Thread one goes again and tries to call the callback and causes the
use-after-free.
Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes: 11e451e740 ("drm/nouveau: remove fence wait code from deferred client work handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pointer nv_encoder could be dereferenced at nouveau_connector.c
in case it's equal to NULL by jumping to goto label.
This patch adds a NULL-check to avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3195c5f978 ("drm/nouveau: set encoder for lvds")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Fixed patch title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc ("drm/nouveau/dp: remove broken display depth function, use the improved one")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru
The call site of nouveau_dsm_pci_probe() uses single set of output
variables for all invocations. So, we must not write anything to them
unless it's an NVIDIA device. Otherwise, if we are called with another
device after the NVIDIA device, we'll clober the result of the NVIDIA
device.
For example, if the other device doesn't have _PR3 resources, the
detection later would miss the presence of power resource support, and
the rest of the code will keep using Optimus DSM, breaking power
management for that machine.
Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run
this detection on a non-NVIDIA device anyway. Thus, check at the
beginning of the detection code if this is an NVIDIA card, and just
return if it isn't.
This, together with commit d22915d22d ("drm/nouveau/devinit/tu102-:
wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and
landed earlier, fixes runtime power management of the NVIDIA card in
Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code
will "timeout", sometimes hanging userspace.
As a bonus, we'll also stop preventing _PR3 usage from the bridge for
unrelated devices, which is always nice, I guess.
Fixes: ccfc2d5cdb ("drm/nouveau: Use generic helper to check _PR3 presence")
Signed-off-by: Ratchanan Srirattanamet <peathot@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/79
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR19MB2780805D4BE1E3F9B3AC96D0BC409@DM6PR19MB2780.namprd19.prod.outlook.com
Drivers have no business looking into dma-mapping internals and check
what backend is used. Unfortunstely the DRM core is still broken and
tries to do plain page allocations instead of using DMA API allocators
by default and uses various bandaids on when to use dma_alloc_coherent.
Switch nouveau to use the same (broken) scheme as amdgpu and radeon
to remove the last driver user of is_swiotlb_active.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
smatch reports
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c:49:1: warning: symbol
'ga102_gsps' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517133112.873856-1-trix@redhat.com
nv50_display_create() is declared in another header, along with
a couple of declarations that are now outdated:
drivers/gpu/drm/nouveau/dispnv50/disp.c:2517:1: error: no previous prototype for 'nv50_display_create'
Fixes: ba801ef068 ("drm/nouveau/kms: display destroy/init/fini hooks can be static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417210329.2469722-1-arnd@kernel.org
More arrays (and arguments) for dcpd were set to 16, when it looks like
DP_RECEIVER_CAP_SIZE (15) should be used. Fix the remaining cases, seen
with GCC 13:
../drivers/gpu/drm/nouveau/nvif/outp.c: In function 'nvif_outp_acquire_dp':
../include/linux/fortify-string.h:57:33: warning: array subscript 'unsigned char[16][0]' is partly outside array bounds of 'u8[15]' {aka 'unsigned char[15]'} [-Warray-bounds=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
...
../drivers/gpu/drm/nouveau/nvif/outp.c:140:9: note: in expansion of macro 'memcpy'
140 | memcpy(args.dp.dpcd, dpcd, sizeof(args.dp.dpcd));
| ^~~~~~
../drivers/gpu/drm/nouveau/nvif/outp.c:130:49: note: object 'dpcd' of size [0, 15]
130 | nvif_outp_acquire_dp(struct nvif_outp *outp, u8 dpcd[DP_RECEIVER_CAP_SIZE],
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 8134437213 ("drm/nouveau/disp: move DP link config into acquire")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <git@karolherbst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230204184307.never.825-kees@kernel.org
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----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=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the functions “nvkm_fanpwm_create” and “nvkm_fantog_create”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the data structure member “fan” behind two null pointer checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d0215dc-74d4-2c42-2eee-7a5fcf62b9f1@web.de
The variable “pbus” was read only once in the implementation of
the function “nvkm_pcie_set_link”.
Thus move the usage of an expression into a parameter for a function call.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/04e2c1f5-26c7-9a23-5861-3d8757556cdd@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvkm_pcie_set_link”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “subdev” behind some condition checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b31019b1-bb73-ed93-3378-e551e17a4f32@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvkm_pstate_new”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “cstate” behind the null pointer check.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6435d829-2c9b-a3f7-c8cd-cf923508a092@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvbios_power_budget_header”.
Thus avoid the risk for undefined behaviour by moving the usage
of an expression into a parameter for a macro call in one if branch.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/529fe82e-59f0-71a2-1e33-b051f833b67c@web.de
Five strings which did not contain a data format specification should
be put into a sequence. Thus use the corresponding function “seq_puts”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bdee7e41-094a-91d1-3f6f-56df402d70b7@web.de
A single character (line break) should be put into a sequence.
Thus use the corresponding function “seq_putc”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6f9b34e-58d9-b1aa-8b12-8d4a55153d1d@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nouveau_debugfs_pstate_get”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “ctrl” behind the null pointer check.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5b7b99f7-1692-74e5-4b1e-cfa14dad7c57@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nouveau_debugfs_pstate_set”.
Thus avoid the risk for undefined behaviour by moving the usage
of an expression into a parameter for a function call at the end.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1903e057-57d3-e12e-da37-008e23afd2e2@web.de
Commit 41d351f295 ("drm/nouveau: stop using ttm_bo_wait")
converted from ttm_bo_wait_ctx() to dma_resv_wait_timeout().
However, dma_resv_wait_timeout() returns greater than zero on
success as opposed to ttm_bo_wait_ctx(). As a result, relocs
will fail and log errors even when it was a success.
Change the return code handling to match that of
nouveau_gem_ioctl_cpu_prep(), which was already using
dma_resv_wait_timeout() correctly.
Fixes: 41d351f295 ("drm/nouveau: stop using ttm_bo_wait")
Reported-by: Tanmay Bhushan <007047221b@gmail.com>
Link: https://lore.kernel.org/lkml/20230119225351.71657-1-007047221b@gmail.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87edolaomt.fsf@jogness.linutronix.de
The symbol is not used outside of the file, so mark it static.
Fixes the following warning:
./drivers/gpu/drm/nouveau/nvkm/engine/disp/gv100.c:591:1: warning:
symbol 'gv100_disp_core_mthd_base' was not declared. Should it be static?
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220924073957.4140388-1-ruanjinjie@huawei.com
Make ga100_mc_device static as it isn't exported, to
fix the following sparse warning:
drivers/gpu/drm/nouveau/nvkm/subdev/mc/ga100.c:51:1: warning: symbol 'ga100_mc_device' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221229155249.669436-1-ben-linux@fluff.org
The nouveau code used to call drm_fb_helper_initial_config() from
nouveau_fbcon_init() before calling drm_dev_register(). This would
probe all connectors so that drm_connector->status could be used during
backlight registration which runs from nouveau_connector_late_register().
After commit 4a16dd9d18 ("drm/nouveau/kms: switch to drm fbdev helpers")
the fbdev emulation code, which now is a drm-client, can only run after
drm_dev_register(). So during backlight registration the connectors are
not probed yet and the drm_connector->status == connected check in
nv50_backlight_init() would now always fail.
Replace the drm_connector->status == connected check with
a drm_helper_probe_detect() == connected check to fix nv_backlight
no longer getting registered because of this.
Fixes: 4a16dd9d18 ("drm/nouveau/kms: switch to drm fbdev helpers")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/202
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181941
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230326205433.36485-1-hdegoede@redhat.com
drm-misc-next for v6.4-rc1:
Cross-subsystem Changes:
- Add drm_bridge.h to drm_bridge maintainers.
Core Changes:
- Assorted fixes to TTM, tests, format-helper, accel.
- Assorted Makefile fixes to drivers and accel.
- Implement fbdev emulation for GEM DMA drivers, and convert a lot of
drivers to use it.
- Use tgid instead of pid for tracking clients.
Driver Changes:
- Assorted fixes in rockchip, vmwgfx, nouveau, cirrus.
- Add imx25 driver.
- Add Elida KD50T048A, Sony TD4353, Novatek NT36523, STARRY 2081101QFH032011-53G panels.
- Add 4K mode support to rockchip.
- Convert cirrus to use regular atomic helpers, and more cirrus
improvements.
- Add damage clipping to cirrus, virtio.
[airlied: add drm_bridge.h include to imx]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7b765c7-d49d-edb5-2a6a-4f7a7be16a59@linux.intel.com
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/nvfw/acr.c:49:1: error: no previous
prototype for ‘wpr_generic_header_dump’ [-Werror=missing-prototypes]
49 | wpr_generic_header_dump(struct nvkm_subdev *subdev,
| ^~~~~~~~~~~~~~~~~~~~~~~
wpr_generic_header_dump is only used in acr.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302124819.686469-1-trix@redhat.com
smatch reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18:
warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static?
nvkm_engn_cgrp_get is only used in runl.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228221533.3240520-1-trix@redhat.com
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error:
no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes]
451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
gf100_fifo_nonstall_block is only used in gf100.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303132731.1919329-1-trix@redhat.com
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
According to Documentation/filesystems/sysfs.rst, the show() callback
function of kobject attributes should strictly use sysfs_emit() instead
of sprintf() family functions. So, make this change.
Issue identified using the coccinelle device_attr_show.cocci script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/+pDaHOgG1x8Py2@ubun2204.myguest.virtualbox.org
