mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-12-17 20:53:56 +00:00
a277654baf
3861 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Masahiro Yamada
|
32e9a0d5ff |
ARM: 9067/1: syscalls: switch to generic syscallhdr.sh
Many architectures duplicate similar shell scripts. This commit converts ARM to use scripts/syscallhdr.sh, and also collects OABI/OEBI syscalls into unistd-eabi.h/unistd-oabi.h, removing unistd-common.h. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Ingo Molnar
|
e2db7592be |
locking: Fix typos in comments
Fix ~16 single-word typos in locking code comments. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Juergen Gross
|
a0e2bf7cb7 |
x86/paravirt: Switch time pvops functions to use static_call()
The time pvops functions are the only ones left which might be used in 32-bit mode and which return a 64-bit value. Switch them to use the static_call() mechanism instead of pvops, as this allows quite some simplification of the pvops implementation. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210311142319.4723-5-jgross@suse.com |
||
|
Joel Stanley
|
08cbcb9702 |
ARM: 9060/1: kexec: Remove unused kexec_reinit callback
The last (only?) user of this was removed in commit
|
||
|
Ard Biesheuvel
|
95731b8ee6 |
ARM: 9059/1: cache-v7: get rid of mini-stack
Now that we have reduced the number of registers that we need to preserve when calling v7_invalidate_l1 from the boot code, we can use scratch registers to preserve the remaining ones, and get rid of the mini stack entirely. This works around any issues regarding cache behavior in relation to the uncached accesses to this memory, which is hard to get right in the general case (i.e., both bare metal and under virtualization) While at it, switch v7_invalidate_l1 to using ip as a scratch register instead of r4. This makes the function AAPCS compliant, and removes the need to stash r4 in ip across the call. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Linus Torvalds
|
6ff6f86bc4 |
ARM updates for 5.12-rc1:
- Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmAzrfYACgkQ9OeQG+St rGTmRQ/+MG9BO1WahlXZ9eVx6n6KmtwlzAy5m4B24GomvcXsa+T2s0Vs43hAsOQ2 f/b6n1mPlwRjAvKW8IfO243HKDE6STGbtVPae6ts586QCODs8i3MQsq4SWmM/DMk TR87hTo1zd4baVT9tkM8/UdUwQjr0yRf4ZDhcCj09tMClnV/8ZAEE9/lLkBpDoer wcuPaDtRfJhN+Pqnm8ES8KPj15nVm/GFWBFoDWZIOCjyDnl8Y/1Bnz3NeqzfwM1o O0NS/9a1tMBn7TNGkkcJCimqOLZS2OgxLND8fie0rC5fmwzVomKXE24OdXpSQCps LiGJr+iQOaX6qNqJY2h1If8F+RPwKfh4Mrk12x0MWB6Ap2iKsQ6bmtUCNatmJ4PG 5iKV5zY0SwKRYXAkXcNosEPUJqZirFHJCzrQ8IBmiSJ1cahZykWFgorDnA97kNLR Wlp2Y/037ug7EGZ0YSaXvbpuMyyjDP4TBKqBiSl7a90QYoXQg2QgcrBO3kVlh/5H Dxq9URvIpDLIGo1EUBU90kB54TUeDhJVHJWDfXNwOp4dP1Xm6b2w+d86GnUQanlC sinRut1ULMyitmIzg9F74MZKaSJ65ffEP3nZKIAlSSISQL+/bXtMDVtakVGsv1k1 w4IdACf3GqbjHig4mOX0oW7IwtyfBY+0q3udY28ASW0ujsH9qHE= =BULT -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l |
||
|
Linus Torvalds
|
99ca0edb41 |
arm64 updates for 5.12
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAmwZcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLA1B/0XMwWUhmJ4ZPK4sr28YWHNGLuCFHDgkMKU
dEmS806OF9d0J7fTczGsKdS4IKtXWko67Z0UGiPIStwfm0itSW2Zgbo9KZeDPqPI
fH0s23nQKxUMyNW7b9p4cTV3YuGVMZSBoMug2jU2DEDpSqeGBk09NPi6inERBCz/
qZxcqXTKxXbtOY56eJmq09UlFZiwfONubzuCrrUH7LU8ZBSInM/6Q4us/oVm4zYI
Pnv996mtL4UxRqq/KoU9+cQ1zsI01kt9/coHwfCYvSpZEVAnTWtfECsJ690tr3mF
TSKQLvOzxbDtU+HcbkNVKW0A38EIO1xXr8yXW9SJx6BJBkyb24xo
=IwMb
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
|
||
|
Linus Torvalds
|
5011bb9fbb |
ARM: SoC changes for v5.12
This is mostly 32-bit code for SoC platforms, and looks smaller
than any such branch I remember from previous kernels, as most
of this is now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=2ehx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"This is mostly 32-bit code for SoC platforms, and looks smaller than
any such branch I remember from previous kernels, as most of this is
now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules"
* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: arm: samsung: include S3C headers in platform entry
MAINTAINERS: Add linux-actions ML for Actions Semi Arch
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
ARM: imx: Remove unused IMX_GPIO_NR() macro
soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
ARM: OMAP2+: fix spellint typo
MAINTAINERS: Update address for OMAP GPMC driver
soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
ARM: tegra: Don't enable unused PLLs on resume from suspend
soc: samsung: pm_domains: Convert to regular platform driver
soc: samsung: exynos-chipid: correct helpers __init annotation
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
soc: samsung: exynos-asv: handle reading revision register error
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
|
||
|
Linus Torvalds
|
584ce3c9b4 |
SoC platform removal
There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use [1], and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 -- added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell -- added in 2011, abandoned after 2012 acquisition - prima2 -- added in 20111, no notable changes since 2015 - tango -- added in 2015, sporadic changes until 2017, but abandoned - u300 -- added in 2009, no notable changes since 2013 - zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x -- added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably. [1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApiR8ACgkQYKtH/8kJ Uifl7A//RZVyxUSlbD/StS6oEOmkZH8j0L7yeYOKkSHGZI+6Dqxo6rooKymbeflk jJvDVQqLcrclT/7rWsKesdN8aW+ilfWrby5nDsWivsROrTw3DdvZgkjh7KYz7tA/ OxygKQu4W9I+ywJltR4ykTUxXohjU+duHPuZJawQk64xE3Q0MWxJlQQ2kHJYVJRu /rWgNDQaI2d8HFhhEVsn4PC0RLWfUuBevKEuRYqZwM/oB/HuYjY+uTUGe2RhlgWb sbcoD93JP2MghSypq33/UtEl4Uk7Wpdv2bshTTv8DL5ToltY7wD8qIIh+aSJk9hP 0FG3NTia7e9dqQQR2bskspGxP73iIuSN1exAbm/Ten5sysy6IsESmzqZRxXv+7Z1 q1Oyc4wYaotJPAxMOE00RMLiRa5domI8V6Y10I5uyOcmpRvwWK2WfCOE7D3WSQ5M i1JiqLnC5JtJ0vyVBeRKo99zZImeXXrmS0n+fcARGtcKwAqKSvKxFcLTmkj3KqHv L4Xgy5f83QrMZWmldX7IiwWjTar2geBM7pFgG/z3R6JqkaxWiDHxyok6j1WUCE7b MViRZ8wT7JC5sIkHuwXZ4jvAXPqHq6J1rmJreU6N/jzmv/PTQoUnQ3C/MbDNhuv8 NDVSRgrPcd/T0BrBkzIWk3t+Oh6ikDgflWsWkqIRFG0vCNx+KdM= =pf3b -----END PGP SIGNATURE----- Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms |
||
|
Linus Torvalds
|
4a7859ea09 |
ARM fixes for 5.11:
- Fix latent bug with DC21285 (Footbridge PCI bridge) configuration accessors that affects GCC >= 4.9.2 - Fix misplaced tegra_uart_config in decompressor - Ensure signal page contents are initialised - Fix kexec oops -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmAdHmUACgkQ9OeQG+St rGTctQ/8Dlwc3G40ziB7WgaSTKsx809e5rLmoT5EvzyCuuHy6wDIbtmmY+hb7HUU h1bys4epWYwbiYHsDDfGWKJy+qHA1sBfZunJdRVE0O/v1x5vMkLruyC8oh0NtplS LRj2HReK6oIuNFA/ywa30xcWvw/BnpM+saoptXQhdsuy26QNirUqQYsq/E2mMkBG Sq9KMtncxw3R1o4ahgJcDAQ7PtvKZIzkEym7gtF/PhaTuiDhmDCOMzVQwikGmgnw ci8Mtzvses6segdCrYGr+4f7G+D7LhEprXLCbpwT5tCoEXXTQ1SIQPIvTjX0qMip UpZ7gP+x7eQZTWv+OnKfgRf4pOC3sqKDth3glrYVJWBzoC7faW1KrY5ugpf4OmQ8 /IKd33PUMmm+a0eHBX/Z/ZZplzIJn81O1gBswG3zfjSCw1xa53QlfZlWEhgttZmN aqTnaP5dcp0mlyOkvju4AcdQ9xBxdBlCQimSRDkCy3FPjgpwlw4zNVPhnYaoK7En sguTGXI8MXAB6MpxGom5oPQw+GtUngyZIrQlk6PbXpmfBUmqAOhRVg6TbyvbgMIy 5i+CVyp3tIzFpY19pSnpNhbzTgnmybBRY0BqFBg8KH0s1r2SyxhhmqSm00bIw4Cf rNuLQtEy4YEVOdcmKlwX9sxUBUo/M27ZXkx7u96+QLapKAFyTb8= =V/Oi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: - Fix latent bug with DC21285 (Footbridge PCI bridge) configuration accessors that affects GCC >= 4.9.2 - Fix misplaced tegra_uart_config in decompressor - Ensure signal page contents are initialised - Fix kexec oops * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: kexec: fix oops after TLB are invalidated ARM: ensure the signal page contains defined contents ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor ARM: footbridge: fix dc21285 PCI configuration accessors |
||
|
Russell King
|
4d62e81b60 |
ARM: kexec: fix oops after TLB are invalidated
Giancarlo Ferrari reports the following oops while trying to use kexec: Unable to handle kernel paging request at virtual address 80112f38 pgd = fd7ef03e [80112f38] *pgd=0001141e(bad) Internal error: Oops: 80d [#1] PREEMPT SMP ARM ... This is caused by machine_kexec() trying to set the kernel text to be read/write, so it can poke values into the relocation code before copying it - and an interrupt occuring which changes the page tables. The subsequent writes then hit read-only sections that trigger a data abort resulting in the above oops. Fix this by copying the relocation code, and then writing the variables into the destination, thereby avoiding the need to make the kernel text read/write. Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Arnd Bergmann
|
f79bf56fb2 |
This pull request contains Broadcom ARM-based SoCs Kconfig/machine entry
changes for 5.12, please pull the following: - Maxime adds a select of the Broadcom STB standard L2 interrupt controller driver which is used in the Raspberry Pi 4 HDMI controller to support I2C and CEC interrupts - Florian adds a debug URT entry for the 72116 STB SoC -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmAXKL4ACgkQh9CWnEQH BwRcahAAhPImzrTkjsZhr1Qa9L26pwBPh2Q55C9vBUuYiAPei7OTdgf1tCPm3cja J70OlYZiFlOWUnTyha4G00gyVRLkAxDNau8iCoJ+2cHpUMHXgYz0Rg5dLXEpAFvH yvxYS+cj78f+thmogH60cu6AMqowU+868mK0ivlwKMt+z4Mce3fIPhJaxWGDNoBy GHHvwv3WBCw8ltlezEJDUrLQ3A1IMMIGk1qRKVpsd6kkH/h/lERuVowgvjztN0Qh QVi3pn3Xu3p9Y4OMQIbDkBiVklrkpcUODLA5ZBieDbmV6DmWMisKaFbYg0BBn/Kt pvKylCHITNDSh1lNcAnxnoiCm0kKf0CE6Y+m8jaVwoC6MNm6Vc0xrX4Uquz2TWjp 5Z9lY0xO3YF2RhtlINkzO/VxndgJIp1f/2gpn3CNvF5pTbHx5ClQsCYk7YfohHYe DV237IeMLSgmLWW9ijujRqsgGB2GV2KMsJH3NVnqYwIYpbURgbZ+oZBfuKkeHyCi y22Kc3RT8EdRFHVbKiIO8npXRl4L6WBcJlwowmasbW150O6X8ckPgRdvXC9O9KVs x2v+0pjZz30kv0JeGy7HaUwJY8y84G7IHCRuXKy+BHZWMX6pFPbQq/sOo8xV45zt Vg/XcZDSBjLQZFBaookKurDlsB5on3sY6rzQrYbzzjkFYmLX1Iw= =aVSR -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux into arm/soc This pull request contains Broadcom ARM-based SoCs Kconfig/machine entry changes for 5.12, please pull the following: - Maxime adds a select of the Broadcom STB standard L2 interrupt controller driver which is used in the Raspberry Pi 4 HDMI controller to support I2C and CEC interrupts - Florian adds a debug URT entry for the 72116 STB SoC * tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 ARM: brcmstb: Add debug UART entry for 72116 Link: https://lore.kernel.org/r/20210131221721.685974-6-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Uwe Kleine-König
|
33d6d2bb7e |
ARM: 9049/1: locomo: make locomo bus's remove callback return void
The driver core ignores the return value of struct bus_type::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct locomo_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Uwe Kleine-König
|
074a6bda18 |
ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct sa1111_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Alain VOLMAT
|
9ca4efec0a |
ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
Update the sti platform LL_UART support to rely on CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT from Kconfig Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Ard Biesheuvel
|
6468e898c6 |
ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
Take the 4 instruction byte swapping sequence from the decompressor's head.S, and turn it into a rev_l GAS macro for general use. While at it, make it use the 'rev' instruction when compiling for v6 or later. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Dmitry Osipenko
|
538eea5362 |
ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
The tegra_uart_config of the DEBUG_LL code is now placed right at the
start of the .text section after commit which enabled debug output in the
decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled
since tegra_uart_config data is executes as a code. Fix the misplaced
tegra_uart_config storage by embedding it into the code.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Florian Fainelli
|
d5d5b7f3e2 |
ARM: brcmstb: Add debug UART entry for 72116
72116 has the same memory map as 7255 and the same physical address for the UART, alias the definition accordingly. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
|
Andre Przywara
|
a37e31fc97 |
firmware: smccc: Introduce SMCCC TRNG framework
The ARM DEN0098 document describe an SMCCC based firmware service to deliver hardware generated random numbers. Its existence is advertised according to the SMCCC v1.1 specification. Add a (dummy) call to probe functions implemented in each architecture (ARM and arm64), to determine the existence of this interface. For now this return false, but this will be overwritten by each architecture's support patch. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Arnd Bergmann
|
f3a732843a |
ARM: remove sirf prima2/atlas platforms
The SiRF Prima2 and Atlas platform code was contributed by Cambridge Silicon Radio (CSR) after aquiring the original SiRF company, and maintained by Barry Song. CSR was subsequently acquired by Qualcomm, who no longer have an interest in maintaining the SoC platform but instead have released more recent SoCs for the same market in the Snapdragon family. As Barry is no longer working for the company, nobody else there wants to maintain it, and there are no third-party users, the best way forward seems to be to completely remove it. Thanks to Barry for maintaining the platform for the past ten years. Cc: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Uwe Kleine-König
|
cc6111375c |
ARM: drop efm32 platform
I didn't touch this code since it served as a platform to introduce ARMv7-M support to Linux. The only known machine that runs Linux has only 4 MiB of RAM (that originally only exists to hold the display's framebuffer). There are no known users and no further use foreseeable, so drop the code. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210115155130.185010-2-u.kleine-koenig@pengutronix.de' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Randy Dunlap
|
87dbc209ea |
local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
4a1106afee |
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
+ followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl/kWCMACgkQEsHwGGHe
VUqVlxAAg3jSS5w5fuaXON2xYZmgKdlRB0fjbklo1ZrWS6sEHrP+gmVmrJSWGZP+
qFleQ6AxaYK57UiBXxS6Xfn7hHRToqdOAGnaSYzIg1aQIofRoLxvm3YHBMKllb+g
x73IBS/Hu9/kiH8EVDrJSkBpVdbPwDnw+FeW4ZWUMF9GVmV8oA6Zx23BVSVsbFda
jat/cEsJQS3GfECJ/Fg5ae+c/2zn5NgbaVtLxVnMnJfAwEpoPz3ogKoANSskdZg3
z6pA1aMFoHr+lnlzcsM5zdboQlwZRKPHvFpsXPexESBy5dPkYhxFnHqgK4hSZglC
c3QoO9Gn+KOJl4KAKJWNzCrd3G9kKY5RXkoei4bH9wGMjW2c68WrbFyXgNsO3vYR
v5CKpq3+jlwGo03GiLJgWQFdgqX0EgTVHHPTcwFpt8qAMi9/JIPSIeTE41p2+AjZ
cW5F0IlikaR+N8vxc2TDvQTuSsroMiLcocvRWR61oV/48pFlEjqiUjV31myDsASg
gGkOxZOOz2iBJfK8lCrKp5p9JwGp0M0/GSHTxlYQFy+p4SrcOiPX4wYYdLsWxioK
AbVhvOClgB3kN7y7TpLvdjND00ciy4nKEC0QZ5p5G59jSLnpSBM/g6av24LsSQwo
S1HJKhQPbzcI1lhaPjo91HQoOOMZHWLes0SqK4FGNIH+0imHliA=
=n7Gc
-----END PGP SIGNATURE-----
Merge tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
||
|
Linus Torvalds
|
c45647f9f5 |
ARM updates for 5.11:
- Rework phys/virt translation - Add KASan support - Move DT out of linear map region - Use more PC-relative addressing in assembly - Remove FP emulation handling while in kernel mode - Link with '-z norelro' - remove old check for GCC <= 4.2 in ARM unwinder code - disable big endian if using clang's linker -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl/ghq0ACgkQ9OeQG+St rGQXsxAAilC+P06NRN3etSFOnJH8GzGNu89wbVW/0lft89o+EpN8oZ9kEYRdb4d1 AJ1z4kGN0akKKNWWeg+1c2YzXh4xGvT1th1TzbBpCf8BxoMHFCSS1IZ98LZ3iiqy bpMRpq2LJG+Va/5lkPnkY7e2sL9Jj5BxFdHAYUUg1Ipc0tfh7hXWLnRMohE1EYmu E69AHTfyWs9ojgspCSg3KoUQ3eXUiaBslf8U4/zFhtmA9lwiOOozZ4ZRRgDWqI75 bp6pGzxpqXIFdD1QyThgSb3gvVBahbsYN7kj1fmD5LokBVWxHawCyzkCzNzKEfDL ES+gc/wTewxwN928cjB5vfmOrAvd1T6amh/gsr39WnOIFngEPAGMBfApXAzhffsc L5TYaDI3DNbQ75FCySfVV2VwQhSW03XQHYtElVxzc2Z1Q1Q9yoscqLzgHDgDy3LM 8s4CRviVtOzP9e/rNx48lUxgdQHmAjQ+dI4Y9NVxyphQzK0LLTv5Uc4zy/nG0F27 QIFtGCDz3PHDPWLzGBudYcu9HAqwXVhZXf9pMeYgwgvmqBdz0BFbXhEbZaup6oDl H5k4iAZh3ADW38+8Vhp/D7CGDhznZm2dFNrgreJm2tHTEwd5xgpsUj1MaAMCcPbr HTxiy0i4p9wN1jl9iWFD4A3/KsBvAIJFB+wqqJOyWku0FikntjU= =fZGX -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux Pull ARM updates from Russell King: - Rework phys/virt translation - Add KASan support - Move DT out of linear map region - Use more PC-relative addressing in assembly - Remove FP emulation handling while in kernel mode - Link with '-z norelro' - remove old check for GCC <= 4.2 in ARM unwinder code - disable big endian if using clang's linker * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits) ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section ARM: 9038/1: Link with '-z norelro' ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro ARM: 9036/1: uncompress: Fix dbgadtb size parameter name ARM: 9035/1: uncompress: Add be32tocpu macro ARM: 9033/1: arm/smp: Drop the macro S(x,s) ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol ARM: 9044/1: vfp: use undef hook for VFP support detection ARM: 9034/1: __div64_32(): straighten up inline asm constraints ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler ARM: 9028/1: disable KASAN in call stack capturing routines ARM: 9026/1: unwind: remove old check for GCC <= 4.2 ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD ARM: 9024/1: Drop useless cast of "u64" to "long long" ARM: 9023/1: Spelling s/mmeory/memory/ ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak ARM: kvm: replace open coded VA->PA calculations with adr_l call ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET ... |
||
|
Russell King
|
ecbbb88727 | Merge branch 'devel-stable' into for-next | ||
|
Russell King
|
8cc9251737 | Merge branches 'fixes' and 'misc' into for-next | ||
|
Anshuman Khandual
|
76460d613d |
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
Macros used as functions can be problematic from the compiler perspective. There was a build failure report caused primarily because of non reference of an argument variable. Hence convert PUD level pgtable helper macros into functions in order to avoid such problems in the future. In the process, it fixes the argument variables sequence in set_pud() which probably remained hidden for being a macro. https://lore.kernel.org/linux-mm/202011020749.5XQ3Hfzc-lkp@intel.com/ https://lore.kernel.org/linux-mm/5fa49698.Vu2O3r+dU20UoEJ+%25lkp@intel.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Linus Torvalds
|
e2ae634014 |
RISC-V Patches for the 5.11 Merge Window, Part 1
We have a handful of new kernel features for 5.11:
* Support for the contiguous memory allocator.
* Support for IRQ Time Accounting
* Support for stack tracing
* Support for strict /dev/mem
* Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending along
either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the
.text.init alignment patch. With any luck we'll sort out the issue, but
given how many bugs get fixed all over the place and how unrelated those
features seem my guess is that we're just running into something that's
been lurking for a while and has already been fixed in the newer QEMU
(though I wouldn't be surprised if it's one of these implicit
assumptions we have in the boot flow). If it was hardware I'd be
strongly inclined to look more closely, but given that users can upgrade
their simulators I'm less worried about it.
There are two merge conflicts, both in build files. They're both a bit
clunky: arch/riscv/Kconfig is out of order (I have a script that's
supposed to keep them in order, I'll fix it) and lib/Makefile is out of
order (though GENERIC_LIB here doesn't mean quite what it does above).
-----BEGIN PGP SIGNATURE-----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=GWIH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
|
||
|
Linus Torvalds
|
005b2a9dc8 |
tif-task_work.arch-2020-12-14
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/YJxsQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjpyEACBdW+YjenjTbkUPeEXzQgkBkTZUYw3g007 DPcUT1g8PQZXYXlQvBKCvGhhIr7/KVcjepKoowiNQfBNGcIPJTVopW58nzpqAfTQ goI2WYGn5EKFFKBPvtH04cJD/Wo8muXdxynKtqyZbnGGgZjQxPrE259b8dpHjBSR 6L7HHkk0D1oU/5b6h6Ocpg9mc/0iIUCZylySAYY3eGO0JaVPJaXgZSJZYgHxCHll Lb+/y/fXdtm/0PmQ3ko0ev54g3yEWqZIX0NsZW1asrButIy+KLzQ2Mz1xFLFDMag prtIfwb8tzgc4dFPY090C/azjCh5CPpxqYS6FkRwS0p86n6OhkyXrqfily5Hs4/B NC7CBPBSH/j+NKUK7CYZcpTzTpxPjUr9p0anUdlvMJz8FhTb/3YEEZ1UTeWOeHmk Yo5SxnFghLeZZeZ1ok6rdymnVa7WEX12SCLGQX31BB2mld0tNbKb4b+FsBF6OUMk IUaX6OjwDFVRaysC88BQ4hjcIP1HxsViG4/VZDX15gjAAH2Pvb+7tev+lcDcOhjz TCD4GNFspTFzRhh9nT7oxQ679qCh9G9zHbzuIRewnrS6iqvo5SJQB3dR2yrWZRRH ySkQFiHpYOlnLJYv0jg9COlGwo2FUdcvKhCvkjQKKBz48rzW/IC0LwKdRQWZDFk3 FKGzP/NBig== =cadT -----END PGP SIGNATURE----- Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe: "This sits on top of of the core entry/exit and x86 entry branch from the tip tree, which contains the generic and x86 parts of this work. Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL. With that done, we can get rid of JOBCTL_TASK_WORK from task_work and signal.c, and also remove a deadlock work-around in io_uring around knowing that signal based task_work waking is invoked with the sighand wait queue head lock. The motivation for this work is to decouple signal notify based task_work, of which io_uring is a heavy user of, from sighand. The sighand lock becomes a huge contention point, particularly for threaded workloads where it's shared between threads. Even outside of threaded applications it's slower than it needs to be. Roman Gershman <romger@amazon.com> reported that his networked workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all spent hammering on the sighand lock, showing 57% of the CPU time there [1]. There are further cleanups possible on top of this. One example is TIF_PATCH_PENDING, where a patch already exists to use TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more consolidation, but the work stands on its own as well" [1] https://github.com/axboe/liburing/issues/215 * tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits) io_uring: remove 'twa_signal_ok' deadlock work-around kernel: remove checking for TIF_NOTIFY_SIGNAL signal: kill JOBCTL_TASK_WORK io_uring: JOBCTL_TASK_WORK is no longer used by task_work task_work: remove legacy TWA_SIGNAL path sparc: add support for TIF_NOTIFY_SIGNAL riscv: add support for TIF_NOTIFY_SIGNAL nds32: add support for TIF_NOTIFY_SIGNAL ia64: add support for TIF_NOTIFY_SIGNAL h8300: add support for TIF_NOTIFY_SIGNAL c6x: add support for TIF_NOTIFY_SIGNAL alpha: add support for TIF_NOTIFY_SIGNAL xtensa: add support for TIF_NOTIFY_SIGNAL arm: add support for TIF_NOTIFY_SIGNAL microblaze: add support for TIF_NOTIFY_SIGNAL hexagon: add support for TIF_NOTIFY_SIGNAL csky: add support for TIF_NOTIFY_SIGNAL openrisc: add support for TIF_NOTIFY_SIGNAL sh: add support for TIF_NOTIFY_SIGNAL um: add support for TIF_NOTIFY_SIGNAL ... |
||
|
Linus Torvalds
|
e994cc240a |
seccomp updates for v5.11-rc1
- Improve seccomp performance via constant-action bitmaps (YiFei Zhu & Kees Cook)
- Fix bogus __user annotations (Jann Horn)
- Add missed CONFIG for improved selftest coverage (Mickaël Salaün)
-----BEGIN PGP SIGNATURE-----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=jJwG
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"The major change here is finally gaining seccomp constant-action
bitmaps, which internally reduces the seccomp overhead for many
real-world syscall filters to O(1), as discussed at Plumbers this
year.
- Improve seccomp performance via constant-action bitmaps (YiFei Zhu
& Kees Cook)
- Fix bogus __user annotations (Jann Horn)
- Add missed CONFIG for improved selftest coverage (Mickaël Salaün)"
* tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Update kernel config
seccomp: Remove bogus __user annotations
seccomp/cache: Report cache data through /proc/pid/seccomp_cache
xtensa: Enable seccomp architecture tracking
sh: Enable seccomp architecture tracking
s390: Enable seccomp architecture tracking
riscv: Enable seccomp architecture tracking
powerpc: Enable seccomp architecture tracking
parisc: Enable seccomp architecture tracking
csky: Enable seccomp architecture tracking
arm: Enable seccomp architecture tracking
arm64: Enable seccomp architecture tracking
selftests/seccomp: Compare bitmap vs filter overhead
x86: Enable seccomp architecture tracking
seccomp/cache: Add "emulator" to check if filter is constant allow
seccomp/cache: Lookup syscall allowlist bitmap for fast path
|
||
|
Linus Torvalds
|
7a932e5702 |
asm-generic: cross-architecture timer cleanup
This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1v8ACgkQmmx57+YA GNmCvQ/9EDlgCt92r8SB+LGafDtgB8TUQZeIrs9S2mByzdxwnw0lxObIXFCnhQgh RpG3dR+ONRDnC5eI149B377JOEFMZWe2+BtYHUHkFARtUEWatslQcz7yAGvVRK/l TS/qReb6piKltlzuanF1bMZbjy2OhlaDRcm+OlC3y5mALR33M4emb+rJ6cSdfk3K v1iZhrxtfQT77ztesh/oPkPiyQ6kNcz7SfpyYOb6f5VLlml2BZ7YwBSVyGY7urHk RL3XqOUP4KKlMEAI8w0E2nvft6Fk+luziBhrMYWK0GvbmI1OESENuX/c6tgT2OQ1 DRaVHvcPG/EAY8adOKxxVyHhEJDSoz5GJV/EtjlOegsJk6RomczR1uuiT3Kvm7Ah PktMKv4xQht1E15KPSKbOvNIEP18w2s5z6gw+jVDv8pw42pVEQManm1D+BICqrhl fcpw6T1drf9UxAjwX4+zXtmNs+a+mqiFG8puU4VVgT4GpQ8umHvunXz2WUjZO0jc 3m8ErJHBvtJwW5TOHGyXnjl9SkwPzHOfF6IcXTYWEDU4/gQIK9TwUvCjLc0lE27t FMCV2ds7/K1CXwRgpa5IrefSkb8yOXSbRZ56NqqF7Ekxw4J5bYRSaY7jb+qD/e+3 5O1y+iPxFrpH+16hSahvzrtcdFNbLQvBBuRtEQOYuHLt2UJrNoU= =QpNs -----END PGP SIGNATURE----- Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform |
||
|
Linus Torvalds
|
157807123c |
asm-generic: mmu-context cleanup
This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1LsACgkQmmx57+YA GNm6kBAAq4/n6nuNnh6b9LhjXaZRG75gEyW7JvHl8KE5wmZHwDHqbwiQgU1b3lUs JJGbfKqi5ASKxNg6MpfYodmCOqeTUUYG0FUCb6lMhcxxMdfLTLYBvkNd6Y143M+T boi5b/iz+OUQdNPzlVeSsUEVsD59FIXmP/GhscWZN9VAyf/aLV2MDBIOhrDSJlPo ObexnP0Iw1E1NRQYDQ6L2dKTHa6XmHyUtw40ABPmd/6MSd1S+D+j3FGg+CYmvnzG k9g8FbNby8xtUfc0pZV4W/322WN8cDFF9bc04eTDZiAv1bk9lmfvWJ2bWjs3s2qt RO/suiZEOAta/WUX9vVLgYn2td00ef+AyjNUgffiUfvQfl++fiCDFTGl+MoCLjbh xQUPcRuRdED7bMKNrC0CcDOSwWEBWVXvkU/szBLDeE1sPjXzGQ80q1Y72k9y961I mqg7FrHqjZsxT9luXMAzClHNhXAtvehkJZBIdHlFok83EFoTQp48Da4jaDuOOhlq p/lkPJWOHegIQMWtGwRyGmG1qzil7b/QBNAPLgu9pF4TA+ySRBEB2BOr2jRSkj6N mNTHQbSYxBoktdt+VhtrSsxR+i8lwlegx+RNRFmKK3VH5da2nfiBaOY7zBQQHxCK yxQvXvsljSVpfkFKLc/S2nLQL1zTkRfFKV1Xmd3+3owR+EoqM60= =NpMX -----END PGP SIGNATURE----- Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ... |
||
|
Linus Torvalds
|
37373d9c37 |
Merge branch 'regset.followup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull regset updates from Al Viro: "Dead code removal, mostly. The only exception is a bit of cleanups on itanic (getting rid of redundant stack unwinds - each access_uarea() call does it and we call that 7 times in a row in ptrace_[sg]etregs(), *after* having done it ourselves in the caller; location where the user registers have been spilled won't change under us, and we can bloody well just call access_elf_reg() directly, giving it the unw_frame_info we'd calculated for our own purposes)" * 'regset.followup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: c6x: kill ELF_CORE_COPY_FPREGS whack-a-mole: USE_ELF_CORE_DUMP [ia64] ptrace_[sg]etregs(): use access_elf_reg() instead of access_uarea() [ia64] missed cleanups from switch to regset coredumps arm: kill dump_task_regs() |
||
|
Linus Torvalds
|
2cffa11e2a |
Generic interrupt and irqchips subsystem:
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/YwZgTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoW4CD/90rTi1OQrMe3nb5okVjUZmktz/K3BN
Cl5+evFiXiNoH+yJSMIVP+8eMAtBH6RgoaD0EUtSYmgzb9h/JRRQYwtPxobXcMb2
2xcWyLPJkVJL431JKNM8BBRYjLA2VnQ6Ia+Kx3BxqpgKXn5+cEMh1dwIy27Ll2rj
+2NHAQe1sHL7o/KcCDhYqbVIDjw5K/d7YPwjEuPeEoNv1DOxrOCdCEfgFN0jBtRE
CoaRTBskeAaHIzHNp47Mxyz43g4tA/D8kB68X0OjpEykVkPUbgNK1FHSwaPbIsFT
FTSPU3zg8Q6DZ+RGyjNJykIFgUbirlJxARk2c6Ct8Kc3DN6K1jQt4EsU7CXRCc98
BTBjUNeFeNj3irZ4GHhyMKOQJCA1Z5nCRfBUGiW6gK8183us3BLfH5DM1zEsAYUh
DCp+UKsLuXhbB80EWq7kl82/2mNGZ8En8EerE6XJA7Z3JN8FplOHEuLezYYzwzbb
RIes971Vc50J2u2Wf/M2c3PDz3D/4FzfwUeA4LJfTnmOL09RYZ8CsqSckpx4ku/F
XiBnjwtGEpDXWJ8z13DC7yONrxFGByV19+sqHTBlub5DmIs0gXjhC0dKAPAruUIS
iCC+Vx6xLgOpTDu8shFsjibbi9Hb6vuZrF2Te+WR5Rf7d80C0J4b5K5PS4daUjr6
IuD2tz+3CtPjHw==
=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
|
||
|
Thomas Gleixner
|
3c41e57a1e |
irqchip updates for Linux 5.11
- Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl/Uxq8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDoW0P/0ZMDvFPxrfnJD46exUgUOPuuFF8jZxAlxD8 7UExqar7u6yX7bbq394jPgtOOxldDagfCx/jCXgb9ja7DK5EHKRcrfjaDT8knHi2 Keg5RaRMRi9TVltvWQTxAkXwSv0Atl881qqsndPeZCez0GNZp+HB34s+rNkZwBOu MBrWihMQOSv5QE6milsNc7HXLSHM1eLZ7Y2XgumNtKrIGEX9yZI7qwdMofwP8Za3 ayMOvc1WAWaTJI7Mg5ac1yTCVbqLmRHhCtws6c6DMgaRu6SI0itmbpQzkDuJJIe3 k9h4KQPaKAFcQsoo3GV0MKTMm63eq82XT3CAdv+htYRY1z95D2+nzNK+mJtsGptX gJ2zeJkUb4u+yVtNguL9qjo5ssCXV/6IybJxv6baaEFnSwQMUwqa066NdxmtqfIe 1BOWnc153a7SRbQ34M9/llje+v8YJbueGMS2RFR2LQ6IjjpaHsXh+YCZokfA/kdk zGbOUD5WWFtFD1T3UoaJ4gFt+pzHjNqym4CcEj4S1Vf5y+POUkNmC+GYK+xfm2Fp WJMbdIUxJhHFRD9L1ShtfAVUSbp712VOOdILp9rYAkOdqfb51BVUiMUP++s2dGp1 ZIT78qt7kTKT1CxbDdFAjzsi7RoMqdSGYgKmG4sVprELeZnFwq47nBkBr8XEQ1TT 0ccEUOY8 =7Z24 -----END PGP SIGNATURE----- Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 5.11 from Marc Zyngier: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org |
||
|
Linus Torvalds
|
edd7ab7684 |
The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
+x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
+jlfoJhMbtx5Gg==
=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
|
||
|
Linus Torvalds
|
0ca2ce81eb |
arm64 updates for 5.11:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags (like
SPARC ADI, subject to wiring up the arch code). The user will have to
opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if
available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans the
Device Tree dma-ranges and the ACPI IORT information before deciding
on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override (UAO)
ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl/XcSgACgkQa9axLQDI
XvGkwg//SLknimELD/cphf2UzZm5RFuCU0x1UnIXs9XYo5BrOpgVLLA//+XkCrKN
0GLAdtBDfw1axWJudzgMBiHrv6wSGh4p3YWjLIW06u/PJu3m3U8oiiolvvF8d7Yq
UKDseKGQnQkrl97J0SyA+Da/u8D11GEzp52SWL5iRxzt6vInEC27iTOp9n1yoaoP
f3y7qdp9kv831ryUM3rXFYpc8YuMWXk+JpBSNaxqmjlvjMzipA5PhzBLmNzfc657
XcrRX5qsgjEeJW8UUnWUVNB42j7tVzN77yraoUpoVVCzZZeWOQxqq5EscKPfIhRt
AjtSIQNOs95ZVE0SFCTjXnUUb823coUs4dMCdftqlE62JNRwdR+3bkfa+QjPTg1F
O9ohW1AzX0/JB19QBxMaOgbheB8GFXh3DVJ6pizTgxJgyPvQQtFuEhT1kq8Cst0U
Pe+pEWsg9t41bUXNz+/l9tUWKWpeCfFNMTrBXLmXrNlTLeOvDh/0UiF0+2lYJYgf
YAboibQ5eOv2wGCcSDEbNMJ6B2/6GtubDJxH4du680F6Emb6pCSw0ntPwB7mSGLG
5dXz+9FJxDLjmxw7BXxQgc5MoYIrt5JQtaOQ6UxU8dPy53/+py4Ck6tXNkz0+Ap7
gPPaGGy1GqobQFu3qlHtOK1VleQi/sWcrpmPHrpiiFUf6N7EmcY=
=zXFk
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
|
||
|
Ard Biesheuvel
|
d72c8b0e1c |
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
Ensure that EFI_PHYS_ALIGN is an unsigned type, to prevent spurious warnings from the type checks in the definition of the max() macro. Link: https://lore.kernel.org/linux-efi/20201213151306.73558-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Palmer Dabbelt
|
7d95a88f92
|
Add and use a generic version of devmem_is_allowed()
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() |
||
|
Palmer Dabbelt
|
914ee96654
|
arm: Use the generic devmem_is_allowed()
This is exactly the same as the arm64 version, which I recently copied into lib/ for use by the RISC-V port. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> |
||
|
Ard Biesheuvel
|
54649911f3 |
efi: stub: get rid of efi_get_max_fdt_addr()
Now that ARM started following the example of arm64 and RISC-V, and no longer imposes any restrictions on the placement of the FDT in memory at boot, we no longer need per-arch implementations of efi_get_max_fdt_addr() to factor out the differences. So get rid of it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org |
||
|
Ard Biesheuvel
|
c0249238fe |
efi: arm: reduce minimum alignment of uncompressed kernel
Now that we reduced the minimum relative alignment between PHYS_OFFSET and PAGE_OFFSET to 2 MiB, we can take this into account when allocating memory for the decompressed kernel when booting via EFI. This minimizes the amount of unusable memory we may end up with due to the base of DRAM being occupied by firmware. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
4dbe44fb53 |
efi: capsule: clean scatter-gather entries from the D-cache
Scatter-gather lists passed to UpdateCapsule() should be cleaned from the D-cache to ensure that they are visible to the CPU after a warm reboot before the MMU is enabled. On ARM and arm64 systems, this implies a D-cache clean by virtual address to the point of coherency. However, due to the fact that the firmware itself is not able to map physical addresses back to virtual addresses when running under the OS, this must be done by the caller. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Nicolas Pitre
|
e64ab473dd |
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
The ARM version of __div64_32() encapsulates a call to __do_div64 with non-standard argument passing. In particular, __n is a 64-bit input argument assigned to r0-r1 and __rem is an output argument sharing half of that r0-r1 register pair. With __n being an input argument, the compiler is in its right to presume that r0-r1 would still hold the value of __n past the inline assembly statement. Normally, the compiler would have assigned non overlapping registers to __n and __rem if the value for __n is needed again. However, here we enforce our own register assignment and gcc fails to notice the conflict. In practice this doesn't cause any problem as __n is considered dead after the asm statement and *n is overwritten. However this is not always guaranteed and clang rightfully complains. Let's fix it properly by making __n into an input-output variable. This makes it clear that those registers representing __n have been modified. Then we can extract __rem as the high part of __n with plain C code. This asm constraint "abuse" was likely relied upon back when gcc didn't handle 64-bit values optimally. Turns out that gcc is now able to optimize things and produces the same code with this patch applied. Reported-by: Antony Yu <swpenim@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Arnd Bergmann
|
68061c02bb |
ARM: highmem: Fix cache_is_vivt() reference
The reference to cache_is_vivt() was moved into a header file,
which now causes a build failure in rare randconfig builds:
arch/arm/include/asm/highmem.h:52:43: error: implicit declaration of function 'cache_is_vivt' [-Werror,-Wimplicit-function-declaration]
Add an explicit include to make it build reliably.
Fixes:
|
||
|
Linus Torvalds
|
c84e1efae0 |
asm-generic: add correct MAX_POSSIBLE_PHYSMEM_BITS setting
This is a single bugfix for a bug that Stefan Agner found on 32-bit Arm, but that exists on several other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/BZx4ACgkQmmx57+YA GNnSPA/9HK0dwaGuXHRxKpt2ShHt5kOmixlmRJszYmuSIJde945EJNTP/+2l2Qs2 TDXmOU8pdZSAZX2EHLLEksNsnhUoTBWzsn4WxHRTNVc2cYuHHA6PKMdAPV136ag/ U0gnC7eCYKCDM3A1A/G4437PDI3vfm0Wzo6Biikxwhi861bshxjVs3DapDQw5+Zn bOS8CCNpmwpDC26ZAfIY8es32Hg063GhdJXQ01uqkaZLJdRn7ui6bkv18vi+b3gM QLeaubDT4+oH+HpJJpFZ01iugBFah5iJtg/JtWyap/LJSkelyjU9Gr7qrrpI7M3t hfDzk7fRjHO1XPn2bDc4InWJEoekE9vde5M0QKn3ID8dFO1M5tNqov2uH40m4fQD UM7irWe0BmP9Nms5LV7dMWChPn8FUEr34ZYAwF9B+YPL1Ec6GGn8mA/E0Iz8pre0 MUgv5LZ8LYdeYvSSpXrgBkgv2pwni5rTc7/K9KtvGdkLQ3rOuihPBbPyR0YTYa8f UkboIky80lcx/uyhhu+OxWxe0q+Ug8WF87UkPIDDhsaF9W2DoErIwiCQhqS+AKs4 9DiCBzLgF6mZ11ijK73DtLNBmQnKdssV9Bs5lnOO0XqYdoqiQ5gRJWrixvI0OWSa WGt66UV481rV/Oxlt1A/1lynYkZU0b121fFFB/EPbuFuUwZu9So= =xgYa -----END PGP SIGNATURE----- Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic. This is a single bugfix for a bug that Stefan Agner found on 32-bit Arm, but that exists on several other architectures" * tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed |
||
|
Peter Collingbourne
|
23acdc76f1 |
signal: clear non-uapi flag bits when passing/returning sa_flags
Previously we were not clearing non-uapi flag bits in sigaction.sa_flags when storing the userspace-provided sa_flags or when returning them via oldact. Start doing so. This allows userspace to detect missing support for flag bits and allows the kernel to use non-uapi bits internally, as we are already doing in arch/x86 for two flag bits. Now that this change is in place, we no longer need the code in arch/x86 that was hiding these bits from userspace, so remove it. This is technically a userspace-visible behavior change for sigaction, as the unknown bits returned via oldact.sa_flags are no longer set. However, we are free to define the behavior for unknown bits exactly because their behavior is currently undefined, so for now we can define the meaning of each of them to be "clear the bit in oldact.sa_flags unless the bit becomes known in the future". Furthermore, this behavior is consistent with OpenBSD [1], illumos [2] and XNU [3] (FreeBSD [4] and NetBSD [5] fail the syscall if unknown bits are set). So there is some precedent for this behavior in other kernels, and in particular in XNU, which is probably the most popular kernel among those that I looked at, which means that this change is less likely to be a compatibility issue. Link: [1] |
||
|
Peter Collingbourne
|
1d82b7898f |
arch: move SA_* definitions to generic headers
Most architectures with the exception of alpha, mips, parisc and sparc use the same values for these flags. Move their definitions into asm-generic/signal-defs.h and allow the architectures with non-standard values to override them. Also, document the non-standard flag values in order to make it easier to add new generic flags in the future. A consequence of this change is that on powerpc and x86, the constants' values aside from SA_RESETHAND change signedness from unsigned to signed. This is not expected to impact realistic use of these constants. In particular the typical use of the constants where they are or'ed together and assigned to sa_flags (or another int variable) would not be affected. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528 Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> |
||
|
Thomas Gleixner
|
7fd70c65fa |
ARM: irqstat: Get rid of duplicated declaration
irq_cpustat_t is exactly the same as the asm-generic one. Define ack_bad_irq so the generic header does not emit the generic version of it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20201113141733.276505871@linutronix.de |
||
|
Kees Cook
|
424c9102fa |
arm: Enable seccomp architecture tracking
To enable seccomp constant action bitmaps, we need to have a static mapping to the audit architecture and system call table size. Add these for arm. Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Arnd Bergmann
|
cef3970381 |
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: |
||
|
Jens Axboe
|
32d59773da |
arm: add support for TIF_NOTIFY_SIGNAL
Wire up TIF_NOTIFY_SIGNAL handling for arm. Cc: linux-arm-kernel@lists.infradead.org Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Thomas Gleixner
|
2a15ba82fa |
ARM: highmem: Switch to generic kmap atomic
No reason having the same code in every architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095857.582196476@linutronix.de |
||
|
Arnd Bergmann
|
6239da2972 |
ARM: rpc: use legacy_timer_tick
rpc is the only user of the timer_tick() function now, and can just call the newly added generic version instead. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
450abd38fe |
ARM: kernel: use relative references for UP/SMP alternatives
Currently, the .alt.smp.init section contains the virtual addresses of the patch sites. Since patching may occur both before and after switching into virtual mode, this requires some manual handling of the address when applying the UP alternative. Let's simplify this by using relative offsets in the table entries: this allows us to simply add each entry's address to its contents, regardless of whether we are running in virtual mode or not. Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
9443076e43 |
ARM: p2v: reduce p2v alignment requirement to 2 MiB
The ARM kernel's linear map starts at PAGE_OFFSET, which maps to a physical address (PHYS_OFFSET) that is platform specific, and is discovered at boot. Since we don't want to slow down translations between physical and virtual addresses by keeping the offset in a variable in memory, we implement this by patching the code performing the translation, and putting the offset between PAGE_OFFSET and the start of physical RAM directly into the instruction opcodes. As we only patch up to 8 bits of offset, yielding 4 GiB >> 8 == 16 MiB of granularity, we have to round up PHYS_OFFSET to the next multiple if the start of physical RAM is not a multiple of 16 MiB. This wastes some physical RAM, since the memory that was skipped will now live below PAGE_OFFSET, making it inaccessible to the kernel. We can improve this by changing the patchable sequences and the patching logic to carry more bits of offset: 11 bits gives us 4 GiB >> 11 == 2 MiB of granularity, and so we will never waste more than that amount by rounding up the physical start of DRAM to the next multiple of 2 MiB. (Note that 2 MiB granularity guarantees that the linear mapping can be created efficiently, whereas less than 2 MiB may result in the linear mapping needing another level of page tables) This helps Zhen Lei's scenario, where the start of DRAM is known to be occupied. It also helps EFI boot, which relies on the firmware's page allocator to allocate space for the decompressed kernel as low as possible. And if the KASLR patches ever land for 32-bit, it will give us 3 more bits of randomization of the placement of the kernel inside the linear region. For the ARM code path, it simply comes down to using two add/sub instructions instead of one for the carryless version, and patching each of them with the correct immediate depending on the rotation field. For the LPAE calculation, which has to deal with a carry, it patches the MOVW instruction with up to 12 bits of offset (but we only need 11 bits anyway) For the Thumb2 code path, patching more than 11 bits of displacement would be somewhat cumbersome, but the 11 bits we need fit nicely into the second word of the u16[2] opcode, so we simply update the immediate assignment and the left shift to create an addend of the right magnitude. Suggested-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
e8e00f5afb |
ARM: p2v: switch to MOVW for Thumb2 and ARM/LPAE
In preparation for reducing the phys-to-virt minimum relative alignment from 16 MiB to 2 MiB, switch to patchable sequences involving MOVW instructions that can more easily be manipulated to carry a 12-bit immediate. Note that the non-LPAE ARM sequence is not updated: MOVW may not be supported on non-LPAE platforms, and the sequence itself can be updated more easily to apply the 12 bits of displacement. For Thumb2, which has many more versions of opcodes, switch to a sequence that can be patched by the same patching code for both versions. Note that the Thumb2 opcodes for MOVW and MVN are unambiguous, and have no rotation bits in their immediate fields, so there is no need to use placeholder constants in the asm blocks. While at it, drop the 'volatile' qualifiers from the asm blocks: the code does not have any side effects that are invisible to the compiler, so it is free to omit these sequences if the outputs are not used. Suggested-by: Russell King <linux@armlinux.org.uk> Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
2730e8eaa4 |
ARM: p2v: use relative references in patch site arrays
Free up a register in the p2v patching code by switching to relative references, which don't require keeping the phys-to-virt displacement live in a register. Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
0869f3b9da |
ARM: p2v: drop redundant 'type' argument from __pv_stub
We always pass the same value for 'type' so pull it into the __pv_stub macro itself. Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
22f2d23098 |
ARM: module: add support for place relative relocations
When using the new adr_l/ldr_l/str_l macros to refer to external symbols from modules, the linker may emit place relative ELF relocations that need to be fixed up by the module loader. So add support for these. Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
0b1674638a |
ARM: assembler: introduce adr_l, ldr_l and str_l macros
Like arm64, ARM supports position independent code sequences that
produce symbol references with a greater reach than the ordinary
adr/ldr instructions. Since on ARM, the adrl pseudo-instruction is
only supported in ARM mode (and not at all when using Clang), having
a adr_l macro like we do on arm64 is useful, and increases symmetry
as well.
Currently, we use open coded instruction sequences involving literals
and arithmetic operations. Instead, we can use movw/movt pairs on v7
CPUs, circumventing the D-cache entirely.
E.g., on v7+ CPUs, we can emit a PC-relative reference as follows:
movw <reg>, #:lower16:<sym> - (1f + 8)
movt <reg>, #:upper16:<sym> - (1f + 8)
1: add <reg>, <reg>, pc
For older CPUs, we can emit the literal into a subsection, allowing it
to be emitted out of line while retaining the ability to perform
arithmetic on label offsets.
E.g., on pre-v7 CPUs, we can emit a PC-relative reference as follows:
ldr <reg>, 2f
1: add <reg>, <reg>, pc
.subsection 1
2: .long <sym> - (1b + 8)
.previous
This is allowed by the assembler because, unlike ordinary sections,
subsections are combined into a single section in the object file, and
so the label references are not true cross-section references that are
visible as relocations. (Subsections have been available in binutils
since 2004 at least, so they should not cause any issues with older
toolchains.)
So use the above to implement the macros mov_l, adr_l, ldr_l and str_l,
all of which will use movw/movt pairs on v7 and later CPUs, and use
PC-relative literals otherwise.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
||
|
Ard Biesheuvel
|
fc2933c133 |
ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
Commit
149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")
created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Andrew Jeffery
|
9fa2e7af3d |
ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template
Setting both CONFIG_KPROBES=y and CONFIG_FORTIFY_SOURCE=y on ARM leads to a panic in memcpy() when injecting a kprobe despite the fixes found in commit |
||
|
Linus Walleij
|
5615f69bc2 |
ARM: 9016/2: Initialize the mapping of KASan shadow memory
This patch initializes KASan shadow region's page table and memory.
There are two stage for KASan initializing:
1. At early boot stage the whole shadow region is mapped to just
one physical page (kasan_zero_page). It is finished by the function
kasan_early_init which is called by __mmap_switched(arch/arm/kernel/
head-common.S)
2. After the calling of paging_init, we use kasan_zero_page as zero
shadow for some memory that KASan does not need to track, and we
allocate a new shadow space for the other memory that KASan need to
track. These issues are finished by the function kasan_init which is
call by setup_arch.
When using KASan we also need to increase the THREAD_SIZE_ORDER
from 1 to 2 as the extra calls for shadow memory uses quite a bit
of stack.
As we need to make a temporary copy of the PGD when setting up
shadow memory we create a helpful PGD_SIZE definition for both
LPAE and non-LPAE setups.
The KASan core code unconditionally calls pud_populate() so this
needs to be changed from BUG() to do {} while (0) when building
with KASan enabled.
After the initial development by Andre Ryabinin several modifications
have been made to this code:
Abbott Liu <liuwenliang@huawei.com>
- Add support ARM LPAE: If LPAE is enabled, KASan shadow region's
mapping table need be copied in the pgd_alloc() function.
- Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate,
kasan_pgd_populate from .meminit.text section to .init.text section.
Reported by Florian Fainelli <f.fainelli@gmail.com>
Linus Walleij <linus.walleij@linaro.org>:
- Drop the custom mainpulation of TTBR0 and just use
cpu_switch_mm() to switch the pgd table.
- Adopt to handle 4th level page tabel folding.
- Rewrite the entire page directory and page entry initialization
sequence to be recursive based on ARM64:s kasan_init.c.
Ard Biesheuvel <ardb@kernel.org>:
- Necessary underlying fixes.
- Crucial bug fixes to the memory set-up code.
Co-developed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Co-developed-by: Abbott Liu <liuwenliang@huawei.com>
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Linus Walleij
|
c12366ba44 |
ARM: 9015/2: Define the virtual space of KASan's shadow region
Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for
the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB
addressable by a 32bit architecture) out of the virtual address
space to use as shadow memory for KASan as follows:
+----+ 0xffffffff
| |
| | |-> Static kernel image (vmlinux) BSS and page table
| |/
+----+ PAGE_OFFSET
| |
| | |-> Loadable kernel modules virtual address space area
| |/
+----+ MODULES_VADDR = KASAN_SHADOW_END
| |
| | |-> The shadow area of kernel virtual address.
| |/
+----+-> TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the
| | shadow address of MODULES_VADDR
| | |
| | |
| | |-> The user space area in lowmem. The kernel address
| | | sanitizer do not use this space, nor does it map it.
| | |
| | |
| | |
| | |
| |/
------ 0
0 .. TASK_SIZE is the memory that can be used by shared
userspace/kernelspace. It us used for userspace processes and for
passing parameters and memory buffers in system calls etc. We do not
need to shadow this area.
KASAN_SHADOW_START:
This value begins with the MODULE_VADDR's shadow address. It is the
start of kernel virtual space. Since we have modules to load, we need
to cover also that area with shadow memory so we can find memory
bugs in modules.
KASAN_SHADOW_END
This value is the 0x100000000's shadow address: the mapping that would
be after the end of the kernel memory at 0xffffffff. It is the end of
kernel address sanitizer shadow area. It is also the start of the
module area.
KASAN_SHADOW_OFFSET:
This value is used to map an address to the corresponding shadow
address by the following formula:
shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
As you would expect, >> 3 is equal to dividing by 8, meaning each
byte in the shadow memory covers 8 bytes of kernel memory, so one
bit shadow memory per byte of kernel memory is used.
The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending
on the VMSPLIT layout of the system: the kernel and userspace can
split up lowmem in different ways according to needs, so we calculate
the shadow offset depending on this.
When kasan is enabled, the definition of TASK_SIZE is not an 8-bit
rotated constant, so we need to modify the TASK_SIZE access code in the
*.s file.
The kernel and modules may use different amounts of memory,
according to the VMSPLIT configuration, which in turn
determines the PAGE_OFFSET.
We use the following KASAN_SHADOW_OFFSETs depending on how the
virtual memory is split up:
- 0x1f000000 if we have 1G userspace / 3G kernelspace split:
- The kernel address space is 3G (0xc0000000)
- PAGE_OFFSET is then set to 0x40000000 so the kernel static
image (vmlinux) uses addresses 0x40000000 .. 0xffffffff
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0x3f000000
so the modules use addresses 0x3f000000 .. 0x3fffffff
- So the addresses 0x3f000000 .. 0xffffffff need to be
covered with shadow memory. That is 0xc1000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x18200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0x26e00000, to
KASAN_SHADOW_END at 0x3effffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0x3f000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0x26e00000 = (0x3f000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0x26e00000 - (0x3f000000 >> 3)
KASAN_SHADOW_OFFSET = 0x26e00000 - 0x07e00000
KASAN_SHADOW_OFFSET = 0x1f000000
- 0x5f000000 if we have 2G userspace / 2G kernelspace split:
- The kernel space is 2G (0x80000000)
- PAGE_OFFSET is set to 0x80000000 so the kernel static
image uses 0x80000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0x7f000000
so the modules use addresses 0x7f000000 .. 0x7fffffff
- So the addresses 0x7f000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x81000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x10200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0x6ee00000, to
KASAN_SHADOW_END at 0x7effffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0x7f000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0x6ee00000 = (0x7f000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0x6ee00000 - (0x7f000000 >> 3)
KASAN_SHADOW_OFFSET = 0x6ee00000 - 0x0fe00000
KASAN_SHADOW_OFFSET = 0x5f000000
- 0x9f000000 if we have 3G userspace / 1G kernelspace split,
and this is the default split for ARM:
- The kernel address space is 1GB (0x40000000)
- PAGE_OFFSET is set to 0xc0000000 so the kernel static
image uses 0xc0000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0xbf000000
so the modules use addresses 0xbf000000 .. 0xbfffffff
- So the addresses 0xbf000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x41000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x08200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0xb6e00000, to
KASAN_SHADOW_END at 0xbfffffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0xbf000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0xb6e00000 = (0xbf000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0xb6e00000 - (0xbf000000 >> 3)
KASAN_SHADOW_OFFSET = 0xb6e00000 - 0x17e00000
KASAN_SHADOW_OFFSET = 0x9f000000
- 0x8f000000 if we have 3G userspace / 1G kernelspace with
full 1 GB low memory (VMSPLIT_3G_OPT):
- The kernel address space is 1GB (0x40000000)
- PAGE_OFFSET is set to 0xb0000000 so the kernel static
image uses 0xb0000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0xaf000000
so the modules use addresses 0xaf000000 .. 0xaffffff
- So the addresses 0xaf000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x51000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x0a200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0xa4e00000, to
KASAN_SHADOW_END at 0xaeffffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0xaf000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0xa4e00000 = (0xaf000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0xa4e00000 - (0xaf000000 >> 3)
KASAN_SHADOW_OFFSET = 0xa4e00000 - 0x15e00000
KASAN_SHADOW_OFFSET = 0x8f000000
- The default value of 0xffffffff for KASAN_SHADOW_OFFSET
is an error value. We should always match one of the
above shadow offsets.
When we do this, TASK_SIZE will sometimes get a bit odd values
that will not fit into immediate mov assembly instructions.
To account for this, we need to rewrite some assembly using
TASK_SIZE like this:
- mov r1, #TASK_SIZE
+ ldr r1, =TASK_SIZE
or
- cmp r4, #TASK_SIZE
+ ldr r0, =TASK_SIZE
+ cmp r4, r0
this is done to avoid the immediate #TASK_SIZE that need to
fit into a limited number of bits.
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Linus Walleij
|
d6d51a96c7 |
ARM: 9014/2: Replace string mem* functions for KASan
Functions like memset()/memmove()/memcpy() do a lot of memory accesses. If a bad pointer is passed to one of these functions it is important to catch this. Compiler instrumentation cannot do this since these functions are written in assembly. KASan replaces these memory functions with instrumented variants. The original functions are declared as weak symbols so that the strong definitions in mm/kasan/kasan.c can replace them. The original functions have aliases with a '__' prefix in their name, so we can call the non-instrumented variant if needed. We must use __memcpy()/__memset() in place of memcpy()/memset() when we copy .data to RAM and when we clear .bss, because kasan_early_init cannot be called before the initialization of .data and .bss. For the kernel compression and EFI libstub's custom string libraries we need a special quirk: even if these are built without KASan enabled, they rely on the global headers for their custom string libraries, which means that e.g. memcpy() will be defined to __memcpy() and we get link failures. Since these implementations are written i C rather than assembly we use e.g. __alias(memcpy) to redirected any users back to the local implementation. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Ard Biesheuvel
|
7a1be318f5 |
ARM: 9012/1: move device tree mapping out of linear region
On ARM, setting up the linear region is tricky, given the constraints around placement and alignment of the memblocks, and how the kernel itself as well as the DT are placed in physical memory. Let's simplify matters a bit, by moving the device tree mapping to the top of the address space, right between the end of the vmalloc region and the start of the the fixmap region, and create a read-only mapping for it that is independent of the size of the linear region, and how it is organized. Since this region was formerly used as a guard region, which will now be populated fully on LPAE builds by this read-only mapping (which will still be able to function as a guard region for stray writes), bump the start of the [underutilized] fixmap region by 512 KB as well, to ensure that there is always a proper guard region here. Doing so still leaves ample room for the fixmap space, even with NR_CPUS set to its maximum value of 32. Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Ard Biesheuvel
|
e9a2f8b599 |
ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
Before moving the DT mapping out of the linear region, let's prepare for this change by removing all the phys-to-virt translations of the __atags_pointer variable, and perform this translation only once at setup time. Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Nicholas Piggin
|
292f70d7cd |
arm: use asm-generic/mmu_context.h for no-op implementations
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Al Viro
|
1510723087 |
arm: kill dump_task_regs()
the last user had been fdpic Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
e731f3146f |
ARM: SoC platform updates
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
||
|
Linus Torvalds
|
746b25b1aa |
Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
|
||
|
Linus Torvalds
|
00937f36b0 |
pci-v5.10-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl+QUFkUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vw6SQ/9FHiAlHIa48/l5ZweqAuN3XnU8hoO
sqMoJE8eqTkIYIT0aQdW6b1sDB0YE6b4UVxzg+UL/E0qYeJqgIUakig7QkyyF1qU
aT5hq2ic+lk88G7AAxK3kgQGPk+JvP1EFIyOu6HBWzzDDzgLme1Iuh/5ulc2/lo+
E4biy0WOnI8vMfCieXGK4bSpc17Rn0+3N4cuVwZXBlntsvicE90VqeWBzqti1sk5
R6gkZuW+EIUNHHL7TLlkCeYZq6QNbXWzhfKCiaGW2wW4eJ4Ek1/ncQjyTbCFytKU
7OIYvrH20XO3L5GEfJ5fdbWErI1dRpoHO4NmhWljyBcVh44VYnM2ixhA7TuJ+TOk
OtMbtoJAlP+QDlVdAW6rmRYmMPLFK/AQl5Aq7ftY22b2rYXqP20BobPy2MpDT71T
sGC8z0ABl/ijo23g3I+3/2VzP/RzGhZJ0ZqagrXj8jHtg8SVy2fLcR5nr/dlrgFk
TG83zML6ui1KViyx5nzElaEtw18aTqP61CNQxijQtNoYwKBTtRKNTrdRr4Qo7Hi6
6S+No3+4z8Kf8d90y0LkJQqr7JRkG6nI3AhXHO3rxXpXJOD2+QzlpwBZTQnASqq7
3kC1doUPmN97rFUYPQWWyOs6xSMcGbGIz8Uus3shH6yDtNxgpnIVoctH55hTEh6w
nSY/4ssIfzJxZCE=
=RCFo
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
||
|
Linus Torvalds
|
709ebe6dff |
ARM development for 5.10-rc1:
- handle inexact watchpoint addresses from Douglas Anderson. - decompressor serial debug cleanups from Linus Walleij. - update L2 cache prefetch bits from Guillaume Tucker. - add text offset and malloc size to the decompressor kexec data. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl+MwEcACgkQ9OeQG+St rGSfEw//QywY4JWkK/4Qi35jiihr4b6ANUDbai2QbeOMCu00aUfpRXTmm/J6/+LU ACFLW456L405PmdPx6GirpRvkUOoGnfs/SMwO3GCxiK02vtnh7Ewy4wQi5ZbeIXQ 0scYBadzdpt3WVI/Lxq9grN476X2xZetwpZq05H4WHip6xwTH/JNeMPNhNuP1HgQ GoTFl+xTA8SirNobzzrhpLfBja3xdN6lVjmB6b+DdBBtbgh/k/4oFjLT1eHAJ511 SBQWuN3GjXMXhDfX93g+17qJNZE40593DSMzgdnK5KrxEC2YzsbGNI0eulID6Zlf lhB9kktvEZ5NfnItBUFqB+To+8Jr0eRu1Dj2Bu9qJ6c4pNo6bDt++D45Aj/jADKx wrLiuOl4g9wJ376DJCp6+LkDAcwaAjg4QTdt8GfAEifbnPCTq74vaKo2xGTeBI1E sbxaXcSSan+uP6NA7/cq/SwEhgA9knyCICgFNXb68hEyR4X9CCMPav+3tNOz6V8E u62DQkKJU2v7wnwR7lDJxKu08xlf2XBX3P+OSA0FlMYbTsBmKveTywIqEzKNQWvm e0gdgWIfCKfQmxVmpuS+3zsSTR1ZSmLkSwTV22juoJ9jQn2p6n5LJnnzT/Pl3ldS WG0DVGQYQSkgSkrbsiudZ70HfrK6UAm4VkJR5ay98HyS3XT537k= =0hdr -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - handle inexact watchpoint addresses (Douglas Anderson) - decompressor serial debug cleanups (Linus Walleij) - update L2 cache prefetch bits (Guillaume Tucker) - add text offset and malloc size to the decompressor kexec data * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add malloc size to decompressor kexec size structure ARM: add TEXT_OFFSET to decompressor kexec image structure ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values ARM: 9010/1: uncompress: Print the location of appended DTB ARM: 9009/1: uncompress: Enable debug in head.S ARM: 9008/1: uncompress: Drop excess whitespace print ARM: 9006/1: uncompress: Wait for ready and busy in debug prints ARM: 9005/1: debug: Select flow control for all debug UARTs ARM: 9004/1: debug: Split waituart to CTS and TXRDY ARM: 9003/1: uncompress: Delete unused debug macros ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses |
||
|
Linus Torvalds
|
5a32c3413d |
dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
7fM=
=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
||
|
Linus Torvalds
|
0b8417c141 |
Power management updates for 5.10-rc1
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
||
|
Linus Torvalds
|
a09b1d7850 |
xen: branch for v5.10-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX4aNVgAKCRCAXGG7T9hj vlrDAQDQ2qelTKKMEV9atKr0RTkHAKrhUidzlTINjFx7BIrTfQEA7TmDr3j0weQU 521+bxE803OEWElp2Qta30boXgGGXQo= =jKt7 -----END PGP SIGNATURE----- Merge tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - two small cleanup patches - avoid error messages when initializing MCA banks in a Xen dom0 - a small series for converting the Xen gntdev driver to use pin_user_pages*() instead of get_user_pages*() - intermediate fix for running as a Xen guest on Arm with KPTI enabled (the final solution will need new Xen functionality) * tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Fix typo in xen_pagetable_p2m_free() x86/xen: disable Firmware First mode for correctable memory errors xen/arm: do not setup the runstate info page if kpti is enabled xen: remove redundant initialization of variable ret xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*() xen/gntdev.c: Mark pages as dirty |
||
|
Matthew Wilcox
|
b2b29d6d01 |
mm: account PMD tables like PTE tables
We account the PTE level of the page tables to the process in order to make smarter OOM decisions and help diagnose why memory is fragmented. For these same reasons, we should account pages allocated for PMDs. With larger process address spaces and ASLR, the number of PMDs in use is higher than it used to be so the inaccuracy is starting to matter. [rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor] Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
c90578360c |
Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
|
||
|
Linus Torvalds
|
34eb62d868 |
Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU w/6GpzAa+7g= =fXAw -----END PGP SIGNATURE----- Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull orphan section checking from Ingo Molnar: "Orphan link sections were a long-standing source of obscure bugs, because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms" * tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/boot/compressed: Warn on orphan section placement x86/build: Warn on orphan section placement arm/boot: Warn on orphan section placement arm/build: Warn on orphan section placement arm64/build: Warn on orphan section placement x86/boot/compressed: Add missing debugging sections to output x86/boot/compressed: Remove, discard, or assert for unwanted sections x86/boot/compressed: Reorganize zero-size section asserts x86/build: Add asserts for unwanted sections x86/build: Enforce an empty .got.plt section x86/asm: Avoid generating unused kprobe sections arm/boot: Handle all sections explicitly arm/build: Assert for unwanted sections arm/build: Add missing sections arm/build: Explicitly keep .ARM.attributes sections arm/build: Refactor linker script headers arm64/build: Assert for unwanted sections arm64/build: Add missing DWARF sections arm64/build: Use common DISCARDS in linker script arm64/build: Remove .eh_frame* sections due to unwind tables ... |
||
|
Linus Torvalds
|
e6412f9833 |
EFI changes for v5.10:
- Preliminary RISC-V enablement - the bulk of it will arrive via the RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config table
rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot#### variable
contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we can
identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available but
returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Ec9QRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1inTQ//TYj3kJq/7sWfUAxmAsWnUEC005YCNf0T
x3kJQv3zYX4Rl4eEwkff8S1PrqqvwUP5yUZYApp8HD9s9CYvzz5iG5xtf/jX+QaV
06JnTMnkoycx2NaOlbr1cmcIn4/cAhQVYbVCeVrlf7QL8enNTBr5IIQmo4mgP8Lc
mauSsO1XU8ZuMQM+JcZSxAkAPxlhz3dbR5GteP4o2K4ShQKpiTCOfOG1J3FvUYba
s1HGnhHFlkQr6m3pC+iG8dnAG0YtwHMH1eJVP7mbeKUsMXz944U8OVXDWxtn81pH
/Xt/aFZXnoqwlSXythAr6vFTuEEn40n+qoOK6jhtcGPUeiAFPJgiaeAXw3gO0YBe
Y8nEgdGfdNOMih94McRd4M6gB/N3vdqAGt+vjiZSCtzE+nTWRyIXSGCXuDVpkvL4
VpEXpPINnt1FZZ3T/7dPro4X7pXALhODE+pl36RCbfHVBZKRfLV1Mc1prAUGXPxW
E0MfaM9TxDnVhs3VPWlHmRgavee2MT1Tl/ES4CrRHEoz8ZCcu4MfROQyao8+Gobr
VR+jVk+xbyDrykEc6jdAK4sDFXpTambuV624LiKkh6Mc4yfHRhPGrmP5c5l7SnCd
aLp+scQ4T7sqkLuYlXpausXE3h4sm5uur5hNIRpdlvnwZBXpDEpkzI8x0C9OYr0Q
kvFrreQWPLQ=
=ZNI8
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
|
||
|
Ionela Voinescu
|
6699e91c07 |
arm: disable frequency invariance for CONFIG_BL_SWITCHER
big.LITTLE switching complicates the setting of a correct cpufreq-based frequency invariance scale factor due to (as observed in drivers/cpufreq/vexpress-spc-cpufreq.c): - Incorrect current and maximum frequencies as a result of the exposure of a virtual frequency table to the cpufreq core, - Missed updates as a result of asynchronous frequency adjustments caused by frequency changes in other CPU pairs. Given that its functionality is atypical in regards to frequency invariance and this is an old technology, disable frequency invariance for when big.LITTLE switching is configured in to prevent incorrect scale setting. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ionela Voinescu
|
a20b7053b5 |
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
Compared to other arch_* functions, arch_set_freq_scale() has an atypical weak definition that can be replaced by a strong architecture specific implementation. The more typical support for architectural functions involves defining an empty stub in a header file if the symbol is not already defined in architecture code. Some examples involve: - #define arch_scale_freq_capacity topology_get_freq_scale - #define arch_scale_freq_invariant topology_scale_freq_invariant - #define arch_scale_cpu_capacity topology_get_cpu_scale - #define arch_update_cpu_topology topology_update_cpu_topology - #define arch_scale_thermal_pressure topology_get_thermal_pressure - #define arch_set_thermal_pressure topology_set_thermal_pressure Bring arch_set_freq_scale() in line with these functions by renaming it to topology_set_freq_scale() in the arch topology driver, and by defining the arch_set_freq_scale symbol to point to the new function for arm and arm64. While there are other users of the arch_topology driver, this patch defines arch_set_freq_scale for arm and arm64 only, due to their existing definitions of arch_scale_freq_capacity. This is the getter function of the frequency invariance scale factor and without a getter function, the setter function - arch_set_freq_scale() has not purpose. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> (BL_SWITCHER and topology parts) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Christoph Hellwig
|
a1fd09e8e6 |
dma-mapping: move dma-debug.h to kernel/dma/
Most of dma-debug.h is not required by anything outside of kernel/dma. Move the four declarations needed by dma-mappin.h or dma-ops providers into dma-mapping.h and dma-map-ops.h, and move the remainder of the file to kernel/dma/debug.h. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
5db5d93089 |
dma-mapping: remove <asm/dma-contiguous.h>
Just provide a weak default definition of dma_contiguous_early_fixup and let arm override it. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Stefano Stabellini
|
f88af7229f |
xen/arm: do not setup the runstate info page if kpti is enabled
The VCPUOP_register_runstate_memory_area hypercall takes a virtual address of a buffer as a parameter. The semantics of the hypercall are such that the virtual address should always be valid. When KPTI is enabled and we are running userspace code, the virtual address is not valid, thus, Linux is violating the semantics of VCPUOP_register_runstate_memory_area. Do not call VCPUOP_register_runstate_memory_area when KPTI is enabled. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> CC: Bertrand Marquis <Bertrand.Marquis@arm.com> CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Link: https://lore.kernel.org/r/20200924234955.15455-1-sstabellini@kernel.org Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
|
Christoph Hellwig
|
38225f2ef2 |
ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets
Switch the omap1510 platform ohci device to use dma_direct_set_offset to set the DMA offset instead of using direct hooks into the DMA mapping code and remove the now unused hooks. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> |
||
|
Masahiro Yamada
|
596b0474d3 |
kbuild: preprocess module linker script
There was a request to preprocess the module linker script like we do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512) The difference between vmlinux.lds and module.lds is that the latter is needed for external module builds, thus must be cleaned up by 'make mrproper' instead of 'make clean'. Also, it must be created by 'make modules_prepare'. You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by 'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to arch/$(SRCARCH)/include/asm/module.lds.h, which is included from scripts/module.lds.S. scripts/module.lds is fine because 'make clean' keeps all the build artifacts under scripts/. You can add arch-specific sections in <asm/module.lds.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org> |
||
|
Lorenzo Pieralisi
|
fc177304d1 |
ARM/PCI: Remove unused fields from struct hw_pci
The msi_ctrl, io_optional and align_resource fields in struct hw_pci are currently unused by arm/mach PCI host controller drivers and we won't be adding any new users. Remove them and related code. Link: https://lore.kernel.org/r/20200904141607.4066-1-lorenzo.pieralisi@arm.com Link: https://lore.kernel.org/r/20200916103045.28651-1-lorenzo.pieralisi@arm.com Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> |
||
|
Valentin Schneider
|
15e5d5b45b |
arch_topology, arm, arm64: define arch_scale_freq_invariant()
arch_scale_freq_invariant() is used by schedutil to determine whether
the scheduler's load-tracking signals are frequency invariant. Its
definition is overridable, though by default it is hardcoded to 'true'
if arch_scale_freq_capacity() is defined ('false' otherwise).
This behaviour is not overridden on arm, arm64 and other users of the
generic arch topology driver, which is somewhat precarious:
arch_scale_freq_capacity() will always be defined, yet not all cpufreq
drivers are guaranteed to drive the frequency invariance scale factor
setting. In other words, the load-tracking signals may very well *not*
be frequency invariant.
Now that cpufreq can be queried on whether the current driver is driving
the Frequency Invariance (FI) scale setting, the current situation can
be improved. This combines the query of whether cpufreq supports the
setting of the frequency scale factor, with whether all online CPUs are
counter-based FI enabled.
While cpufreq FI enablement applies at system level, for all CPUs,
counter-based FI support could also be used for only a subset of CPUs to
set the invariance scale factor. Therefore, if cpufreq-based FI support
is present, we consider the system to be invariant. If missing, we
require all online CPUs to be counter-based FI enabled in order for the
full system to be considered invariant.
If the system ends up not being invariant, a new condition is needed in
the counter initialization code that disables all scale factor setting
based on counters.
Precedence of counters over cpufreq use is not important here. The
invariant status is only given to the system if all CPUs have at least
one method of setting the frequency scale factor.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Jim Quinlan
|
e0d072782c |
dma-mapping: introduce DMA range map, supplanting dma_pfn_offset
The new field 'dma_range_map' in struct device is used to facilitate the use of single or multiple offsets between mapping regions of cpu addrs and dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only capable of holding a single uniform offset and had no region bounds checking. The function of_dma_get_range() has been modified so that it takes a single argument -- the device node -- and returns a map, NULL, or an error code. The map is an array that holds the information regarding the DMA regions. Each range entry contains the address offset, the cpu_start address, the dma_start address, and the size of the region. of_dma_configure() is the typical manner to set range offsets but there are a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel driver code. These cases now invoke the function dma_direct_set_offset(dev, cpu_addr, dma_addr, size). Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [hch: various interface cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com> |
||
|
Christoph Hellwig
|
3799e402a4 |
ARM/dma-mapping: move various helpers from dma-mapping.h to dma-direct.h
Move the helpers to translate to and from direct mapping DMA addresses to dma-direct.h. This not only is the most logical place, but the new placement also avoids dependency loops with pending commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> |
||
|
Christoph Hellwig
|
002a26fb55 |
ARM/dma-mapping: remove dma_to_virt
dma_to_virt is entirely unused, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
f982438e82 |
ARM/dma-mapping: remove a __arch_page_to_dma #error
The __arch_page_to_dma hook is long gone. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Marc Zyngier
|
5ebf353af2 |
ARM: Remove custom IRQ stat accounting
Let's switch the arm code to the core accounting, which already does everything we need. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
8aa837cb7a |
ARM: Kill __smp_cross_call and co
The old IPI registration interface is now unused on arm, so let's get rid of it. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Ard Biesheuvel
|
6208857b8f |
efi/libstub: arm32: Base FDT and initrd placement on image address
The way we use the base of DRAM in the EFI stub is problematic as it is ill defined what the base of DRAM actually means. There are some restrictions on the placement of FDT and initrd which are defined in terms of dram_base, but given that the placement of the kernel in memory is what defines these boundaries (as on ARM, this is where the linear region starts), it is better to use the image address in these cases, and disregard dram_base altogether. Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org> Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Linus Walleij
|
4df24fef09 |
ARM: 9005/1: debug: Select flow control for all debug UARTs
Instead of a flow control selection mechanism specifically for 8250, make this available for all debug UARTs. If the debug UART supports waiting for CTS to be asserted, then this code can be activated for terminals that need it. We keep the defaults for EBSA110, Footbridge, Gemini and RPC so that this still works as expected for these older platforms: they assume that flow control shall be enabled for debug prints. I switch the location of the check for ifdef CONFIG_DEBUG_UART_FLOW_CONTROL from the actual debug UART drivers: the code would get compiled-out for 8250 and Tegra unless their custom config (or passing -DFLOW_CONTROL in the Tegra case) was not set. Instead this is conditional at the three places where we print debug messages. The idea is that debug UARTs can be implemented without this ifdef boilerplate so they look cleaner, alas the ifdef has to be somewhere. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Linus Walleij
|
2c50a570e9 |
ARM: 9004/1: debug: Split waituart to CTS and TXRDY
This patch was triggered by a remark from Russell that
introducing a call to the waituart (needed to fix debug prints
on the Qualcomm platforms) was dangerous because in some cases
this will involve waiting for a modem CTS (clear to send)
signal, and debug messages would maybe not work on platforms
with no modem connected to the UART port: they will just
hang waiting for the modem to assert CTS and this might never
happen.
Looking through all UART debug drivers implementing the waituart
macro I discovered that all users except two actually use this
macro to check if the UART is ready for TX, let's call this
TXRDY.
Only two debug UART drivers actually check for CTS:
- arch/arm/include/debug/8250.S
- arch/arm/include/debug/tegra.S
The former is very significant since the 8250 is possibly
the most common UART on the planet.
We have the following problem: the semantics of waituart are
ambiguous making it dangerous to introduce the macro to debug
code fixing debug prints for Qualcomm. To start to pry this
problem apart, this patch does the following:
- Convert all debug UART drivers to define two macros:
- waituartcts with the clear semantic to wait for CTS
to be asserted
- waituarttxrdy with the clear semantic to wait for the TX
capability of the UART to be ready
- When doing this take care to assign the right function to
each drivers macro, so they now do exactly the above.
- Update the three sites in the kernel invoking the waituart
macro to call waituartcts/waituarttxrdy in sequence, so that
the functional impact on the kernel should be zero.
After this we can start to change the code sites using this
code to do the right thing.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|