This reverts commit a85857633b.
We're still factoring ctime into our change attribute even in the
IS_I_VERSION case. If someone sets the system time backwards, a client
could see the change attribute go backwards. Maybe we can just say
"well, don't do that", but there's some question whether that's good
enough, or whether we need a better guarantee.
Also, the client still isn't actually using the attribute.
While we're still figuring this out, let's just stop returning this
attribute.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It doesn't make sense to carry all these extra fields around. Just
make everything into change attribute from the start.
This is just cleanup, there should be no change in behavior.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
inode_query_iversion() can modify i_version. Depending on the exported
filesystem, that may not be safe. For example, if you're re-exporting
NFS, NFS stores the server's change attribute in i_version and does not
expect it to be modified locally. This has been observed causing
unnecessary cache invalidations.
The way a filesystem indicates that it's OK to call
inode_query_iverson() is by setting SB_I_VERSION.
So, move the I_VERSION check out of encode_change(), where it's used
only in GETATTR responses, to nfsd4_change_attribute(), which is
also called for pre- and post- operation attributes.
(Note we could also pull the NFSEXP_V4ROOT case into
nfsd4_change_attribute() as well. That would actually be a no-op,
since pre/post attrs are only used for metadata-modifying operations,
and V4ROOT exports are read-only. But we might make the change in
the future just for simplicity.)
Reported-by: Daire Byrne <daire@dneg.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all the NFSv4 decoder functions have been converted to
make direct calls to the xdr helpers, remove the unused C macros.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
And clean-up: Now that we have removed the DECODE_TAIL macro from
nfsd4_decode_compound(), we observe that there's no benefit for
nfsd4_decode_compound() to return nfs_ok or nfserr_bad_xdr only to
have its sole caller convert those values to one or zero,
respectively. Have nfsd4_decode_compound() return 1/0 instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor for clarity.
Also, remove a stale comment. Commit ed94164398 ("nfsd: implement
machine credential support for some operations") added support for
SP4_MACH_CRED, so state_protect_a is no longer completely ignored.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A dedicated sessionid4 decoder is introduced that will be used by
other operation decoders in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor for clarity.
Note that op_fname is the only instance of an NFSv4 filename stored
in a struct xdr_netobj. Convert it to a u32/char * pair so that the
new nfsd4_decode_filename() helper can be used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Enable nfsd4_decode_opaque() to be used in more decoders, and
replace the READ* macros in nfsd4_decode_opaque().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A dedicated decoder for component4 is introduced here, which will be
used by other operation decoders in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Let's be more careful to avoid overrunning the memory that backs
the bitmap array. This requires updating the synopsis of
nfsd4_decode_fattr().
Bruce points out that a server needs to be careful to return nfs_ok
when a client presents bitmap bits the server doesn't support. This
includes bits in bitmap words the server might not yet support.
The current READ* based implementation is good about that, but that
requirement hasn't been documented.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Because the fattr4 is now managed in an xdr_stream, all that is
needed is to store the initial position of the stream before
decoding the attribute list. Then the actual length of the list
is computed using the final stream position, after decoding is
complete.
No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Convert the READ_BUF macro in nfs4xdr.c from open code to instead
use the new xdr_stream-style decoders already in use by the encode
side (and by the in-kernel NFS client implementation). Once this
conversion is done, each individual NFSv4 argument decoder can be
independently cleaned up to replace these macros with C code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For troubleshooting purposes, record failures to decode NFSv4
operation arguments and encode operation results.
trace_nfsd_compound_decode_err() replaces the dprintk() call sites
that are embedded in READ_* macros that are about to be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Start off the conversion to xdr_stream by de-duplicating the functions
that decode void arguments and encode void results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Have the NFSD encoders annotate the boundaries of every
direct-data-placement eligible result data payload. Then change
svcrdma to use that annotation instead of the xdr->page_len
when handling Write chunks.
For NFSv4 on RDMA, that enables the ability to recognize multiple
result payloads per compound. This is a pre-requisite for supporting
multiple Write chunks per RPC transaction.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: "result payload" is a less confusing name for these
payloads. "READ payload" reflects only the NFS usage.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reply to the client with multiple hole and data segments. I use the
result of the first vfs_llseek() call for encoding as an optimization so
we don't have to immediately repeat the call. This also lets us encode
any remaining reply as data if we get an unexpected result while trying
to calculate a hole.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
But only one of each right now. We'll expand on this in the next patch.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
However, we still only reply to the READ_PLUS call with a single segment
at this time.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch adds READ_PLUS support for returning a single
NFS4_CONTENT_DATA segment to the client. This is basically the same as
the READ operation, only with the extra information about data segments.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The original intent was presumably to reduce code duplication. The
trade-off was:
- No support for an NFSD proc function returning a non-success
RPC accept_stat value.
- No support for void NFS replies to non-NULL procedures.
- Everyone pays for the deduplication with a few extra conditional
branches in a hot path.
In addition, nfsd_dispatch() leaves *statp uninitialized in the
success path, unlike svc_generic_dispatch().
Address all of these problems by moving the logic for encoding
the NFS status code into the NFS XDR encoders themselves. Then
update the NFS .pc_func methods to return an RPC accept_stat
value.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd_dispatch() is a hot path. Let's optimize the XDR method calls
for the by-far common case, which is that the XDR methods are indeed
present.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Squelch some sparse warnings:
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:1860:16: warning: incorrect type in assignment (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:1860:16: expected int status
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:1860:16: got restricted __be32
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:1862:24: warning: incorrect type in return expression (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:1862:24: expected restricted __be32
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:1862:24: got int status
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Squelch some sparse warnings:
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4692:24: warning: incorrect type in return expression (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4692:24: expected int
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4692:24: got restricted __be32 [usertype]
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4702:32: warning: incorrect type in return expression (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4702:32: expected int
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4702:32: got restricted __be32 [usertype]
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4739:13: warning: incorrect type in assignment (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4739:13: expected restricted __be32 [usertype] err
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4739:13: got int
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4891:15: warning: incorrect type in assignment (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4891:15: expected unsigned int [assigned] [usertype] count
/home/cel/src/linux/linux/fs/nfsd/nfs4xdr.c:4891:15: got restricted __be32 [usertype]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reserving space for a large READ payload requires special handling when
reserving space in the xdr buffer pages. One problem we can have is use
of the scratch buffer, which is used to get a pointer to a contiguous
region of data up to PAGE_SIZE. When using the scratch buffer, calls to
xdr_commit_encode() shift the data to it's proper alignment in the xdr
buffer. If we've reserved several pages in a vector, then this could
potentially invalidate earlier pointers and result in incorrect READ
data being sent to the client.
I get around this by looking at the amount of space left in the current
page, and never reserve more than that for each entry in the read
vector. This lets us place data directly where it needs to go in the
buffer pages.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In nfsd4_encode_listxattrs(), the variable p is assigned to at one point
but this value is never used before p is reassigned. Fix this.
Addresses-Coverity: ("Unused value")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Check if user extended attributes are supported for an inode,
and return the answer when being queried for file attributes.
An exported filesystem can now signal its RFC8276 user extended
attributes capability.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
