Make sure that the two basic command interface functions cmd_exec and
cmd_invoke will return well defined return values:
return < 0 : Command execution couldn't be submitted by driver
return > 0 : Command execution couldn't be performed by firmware
return = 0 : Command was executed by FW, Caller must check FW
outbox status.
These statuses are valid for the blocking call of cmd_exec() e.g. when
callback == NULL, in a downstream patch, will refactor the code to
provide the same return value semantics to the callback.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In active-backup mode the backup interface's packets are dropped by the
bond device. In switchdev where TC rules are offloaded to the FDB
this can lead to packets being hit in the FDB where without offload
they would have been dropped before reaching TC rules in the kernel.
Create a drop rule to make sure packets on inactive ports are dropped
before reaching the FDB.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A bond device will drop duplicate packets (received on inactive ports)
by default. A flag (all_slaves_active) can be set to override such
behaviour. This flag is a global flag per bond device (ALB mode isn't
supported by mlx5 driver so it can be ignored)
When NETDEV_CHANGEUPPER / NETDEV_CHANGEINFODATA event is received check if
there is an interface that is inactive.
Downstream patch will use this information in order to decide if a drop
rule is needed.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Instead of using 1 & 2 as the ports numbers use an enum value.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use the local variable for dev0 (and add from dev1) instead of using
the devices stored in the ldev structure. Makes the code easier
to read.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Support inserting an ingress ACL drop rule on the uplink in
switchdev mode. This will be used by downstream patches to offload
active-backup lag mode. The drop rule (if created) is the first rule
in the ACL.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As both uplinks set the same metadata there is no need to merge
the ACL handling of both into a single one.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When in switchdev mode wire traffic will hit the FDB in one of two
scenarios.
- Shared FDB, in that case traffic from both physical ports should be
tagged by the same metadata value so a single FDB rule could catch
traffic from both ports.
- Two E-Switches, traffic from each physical port will hit the native
E-Switch which means traffic from one physical port can't reach the
E-Switch of the other one.
Looking at those two scenarios it means we can always use the same metadata
value to tag wire traffic regardless of the mode.
Reserve a single metadata value to be used to tag wire traffic.
Signed-off-by: Sunil Rani <sunrani@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If the flow table isn't an autogroup the upper driver has to create the
flow groups explicitly. This information can't later be used when
creating rules to insert into a specific flow group. Allow such use case.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 has some unused static inline helpers in include/
while at it also clean static inlines in the driver itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Two patches which fix a few bugs in the unalignment handlers. The fldd
and fstd instructions weren't handled at all on 32-bit kernels, the stw
instruction didn't checked for fault errors and the fldw_l and ldw_m
were handled wrongly as integer vs. floating point instructions.
Both patches are tagged for stable series.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYhZtYAAKCRD3ErUQojoP
X95qAP4umgbso0RkZrxClYVCON6J/Ndo3PHEe3B992/Jv+R7ZAEA2O5ZOs7nUjdv
rN27wpJU/BBhbKBqs3rYCw4UgQ2zTQI=
=H3yW
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc unaligned handler fixes from Helge Deller:
"Two patches which fix a few bugs in the unalignment handlers.
The fldd and fstd instructions weren't handled at all on 32-bit
kernels, the stw instruction didn't check for fault errors and the
fldw_l and ldw_m were handled wrongly as integer vs floating point
instructions.
Both patches are tagged for stable series"
* tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/unaligned: Fix ldw() and stw() unalignment handlers
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
Fix two old bugs and one new bug in hwmon subsystem.
- In pmbus core, clear pmbus fault/warning status bits after read
to follow PMBus standard
- In hwmon core, handle failure to register sensor with thermal
zone correctly
- In ntc_thermal driver, use valid thermistor names for Samsung
thermistors
-----BEGIN PGP SIGNATURE-----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=hqZA
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two old bugs and one new bug in the hwmon subsystem:
- In pmbus core, clear pmbus fault/warning status bits after read to
follow PMBus standard
- In hwmon core, handle failure to register sensor with thermal zone
correctly
- In ntc_thermal driver, use valid thermistor names for Samsung
thermistors"
* tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) Clear pmbus fault/warning bits after read
hwmon: Handle failure to register sensor with thermal zone correctly
hwmon: (ntc_thermistor) Underscore Samsung thermistor
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmIV/fQACgkQ4CHKc/GJ
qRBhaAgAoz81fjhlkcCaHdgxVTEx6L93iJQJiZWoE3gTKk2jruun3sIYmPSOiY+b
bWR1datDnvaS/Xv04rZ6pm6XPjCT+LmrOQCOlZMjptc6HKoKuDZTvcQ0u5CYOfQS
I9ZRtPaHjSmhntS8BErxGes5+PF1hz/q2rGuODt4/DQCNPZNdHXMdym9w4Z4xHXm
TuH2VXzv5JXhYlUEDz2HP8LXmbvxA9rGaMgngpX92pCL8uTLqANoZCT+zHEj3cKw
db6/A8S7Y4PsfF0JphNup+wcsWj+yfIrfAQwnTgNXR4hlhbUxOHTJqXlQGK/NW7C
tg2nXxQQn14MwPlkatdxFYzg1TbMYg==
=U6Fu
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
There are enough VBIOS escapes without the proper workaround that some
users still hit this. Microsoft never productized ATS on Windows so OEM
platforms that were Windows-only didn't always validate ATS.
The advantages of ATS are not worth it compared to the potential
instabilities on harvested boards. Disable ATS on all Navi10 and Navi14
boards.
Symptoms include:
amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000]
[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049
amdgpu 0000:07:00.0: amdgpu: GPU reset begin!
amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume
amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110
amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed
Related commits:
e8946a53e2 ("PCI: Mark AMD Navi14 GPU ATS as broken")
a2da5d8cc0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3a ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
d28ca864c4 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
9b44b0b09d ("PCI: Mark AMD Stoney GPU ATS as broken")
[bhelgaas: add symptoms and related commits]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760
Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Remove non-inclusive language from the driver.
Additionally correct the duplication "from from"
reported by checkpatch after the changes above.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
I missed the obvious case where netif_ix() is invoked from hard-IRQ
context.
Disabling bottom halves is only needed in process context. This ensures
that the code remains on the current CPU and that the soft-interrupts
are processed at local_bh_enable() time.
In hard- and soft-interrupt context this is already the case and the
soft-interrupts will be processed once the context is left (at irq-exit
time).
Disable bottom halves if neither hard-interrupts nor soft-interrupts are
disabled. Update the kernel-doc, mention that interrupts must be enabled
if invoked from process context.
Fixes: baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/Yg05duINKBqvnxUc@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3)
Maximum Host to Controller Data length (MAXH2CDATA): Specifies the
maximum number of PDU-Data bytes per H2CData PDU in bytes. This value
is a multiple of dwords and should be no less than 4,096.
Current code sets H2CData PDU data_length to r2t_length,
it does not check MAXH2CDATA value. Fix this by setting H2CData PDU
data_length to min(req->h2cdata_left, queue->maxh2cdata).
Also validate MAXH2CDATA value returned by target in ICResp PDU,
if it is not a multiple of dword or if it is less than 4096 return
-EINVAL from nvme_tcp_init_connection().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses
to check if a path can be used or not. We also need to set this flag
for devices that fail the ZNS feature validation and which are available
through passthrough devices only to that they can be used in multipathing
setups.
Fixes: e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
Reported-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
When a fabrics controller claims to support an invalidate metadata
configuration we already warn and disable metadata support. No need to
also return an error during revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Hans Schultz says:
====================
Add support for locked bridge ports (for 802.1X)
This series starts by adding support for SA filtering to the bridge,
which is then allowed to be offloaded to switchdev devices. Furthermore
an offloading implementation is supplied for the mv88e6xxx driver.
Public Local Area Networks are often deployed such that there is a
risk of unauthorized or unattended clients getting access to the LAN.
To prevent such access we introduce SA filtering, such that ports
designated as secure ports are set in locked mode, so that only
authorized source MAC addresses are given access by adding them to
the bridges forwarding database. Incoming packets with source MAC
addresses that are not in the forwarding database of the bridge are
discarded. It is then the task of user space daemons to populate the
bridge's forwarding database with static entries of authorized entities.
The most common approach is to use the IEEE 802.1X protocol to take
care of the authorization of allowed users to gain access by opening
for the source address of the authorized host.
With the current use of the bridge parameter in hostapd, there is
a limitation in using this for IEEE 802.1X port authentication. It
depends on hostapd attaching the port on which it has a successful
authentication to the bridge, but that only allows for a single
authentication per port. This patch set allows for the use of
IEEE 802.1X port authentication in a more general network context with
multiple 802.1X aware hosts behind a single port as depicted, which is
a commonly used commercial use-case, as it is only the number of
available entries in the forwarding database that limits the number of
authenticated clients.
+--------------------------------+
| |
| Bridge/Authenticator |
| |
+-------------+------------------+
802.1X port |
|
|
+------+-------+
| |
| Hub/Switch |
| |
+-+----------+-+
| |
+--+--+ +--+--+
| | | |
Hosts | a | | b | . . .
| | | |
+-----+ +-----+
The 802.1X standard involves three different components, a Supplicant
(Host), an Authenticator (Network Access Point) and an Authentication
Server which is typically a Radius server. This patch set thus enables
the bridge module together with an authenticator application to serve
as an Authenticator on designated ports.
For the bridge to become an IEEE 802.1X Authenticator, a solution using
hostapd with the bridge driver can be found at
https://github.com/westermo/hostapd/tree/bridge_driver .
The relevant components work transparently in relation to if it is the
bridge module or the offloaded switchcore case that is in use.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These tests check that the basic locked port feature works, so that
no 'host' can communicate (ping) through a locked port unless the
MAC address of the 'host' interface is in the forwarding database of
the bridge.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Acked-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Supporting bridge ports in locked mode using the drop on lock
feature in Marvell mv88e6xxx switchcores is described in the
'88E6096/88E6097/88E6097F Datasheet', sections 4.4.6, 4.4.7 and
5.1.2.1 (Drop on Lock).
This feature is implemented here facilitated by the locked port flag.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensures that the DSA switch driver gets notified of changes to the
BR_PORT_LOCKED flag as well, for the case when a DSA port joins or
leaves a LAG that is a bridge port.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Various switchcores support setting ports in locked mode, so that
clients behind locked ports cannot send traffic through the port
unless a fdb entry is added with the clients MAC address.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a 802.1X scenario, clients connected to a bridge port shall not
be allowed to have traffic forwarded until fully authenticated.
A static fdb entry of the clients MAC address for the bridge port
unlocks the client and allows bidirectional communication.
This scenario is facilitated with setting the bridge port in locked
mode, which is also supported by various switchcore chipsets.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heyi Guo says:
====================
drivers/net/ftgmac100: fix occasional DHCP failure
This patch set is to fix the issues discussed in the mail thread:
https://lore.kernel.org/netdev/51f5b7a7-330f-6b3c-253d-10e45cdb6805@linux.alibaba.com/
and follows the advice from Andrew Lunn.
The first 2 patches refactors the code to enable adjust_link calling reset
function directly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DHCP failures were observed with systemd 247.6. The issue could be
reproduced by rebooting Aspeed 2600 and then running ifconfig ethX
down/up.
It is caused by below procedures in the driver:
1. ftgmac100_open() enables net interface and call phy_start()
2. When PHY is link up, it calls netif_carrier_on() and then
adjust_link callback
3. ftgmac100_adjust_link() will schedule the reset task
4. ftgmac100_reset_task() will then reset the MAC in another schedule
After step 2, systemd will be notified to send DHCP discover packet,
while the packet might be corrupted by MAC reset operation in step 4.
Call ftgmac100_reset() directly instead of scheduling task to fix the
issue.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to prepare for ftgmac100_adjust_link() to call
ftgmac100_reset() directly. Only code places are changed.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to prepare for ftgmac100_adjust_link() to call reset function
directly, instead of task schedule.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following coccicheck warning:
./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message
in NL_SET_ERR_MSG_MOD
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drop_monitor is using an unique list on which all netdevices in
the host have an element, regardless of their netns.
This scales poorly, not only at device unregister time (what I
caught during my netns dismantle stress tests), but also at packet
processing time whenever trace_napi_poll_hit() is called.
If the intent was to avoid adding one pointer in 'struct net_device'
then surely we prefer O(1) behavior.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Various updates
This patchset contains miscellaneous updates to mlxsw gathered over
time.
Patches #1-#2 fix recent regressions present in net-next.
Patches #3-#11 are small cleanups performed while adding line card
support in mlxsw.
Patch #12 adds the SFF-8024 Identifier Value of OSFP transceiver in
order to be able to dump their EEPROM contents over the ethtool IOCTL
interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can already dump the EEPROM contents of QSFP-DD transceiver
modules via its ethtool_ops::get_module_info() and
ethtool_ops::get_module_eeprom() callbacks.
Add support for OSFP transceiver modules by adding their SFF-8024
Identifier Value (0x19).
This is required for future NVIDIA Spectrum-4 based systems that will be
equipped with OSFP transceivers.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since SwitchX-2 support was removed in commit b0d80c013b ("mlxsw:
Remove Mellanox SwitchX-2 ASIC support"), all the ASICs supported by
mlxsw support the resource query command.
Therefore, remove the resource query check and always query resources
from the device.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there are several different features defined in 'mlxsw_driver'
for trap support validation. There is no reason to have dedicated
features for specific traps. Perform validation of all of them by
testing feature 'MLXSW_BUS_F_TXRX'.
Remove trap capability validation from 'core_env.c' which is redundant
after validation has been added to mlxsw_core_trap_register().
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FW minor and subminor versions are the same for all generations of
Spectrum ASICs. Unify them into a single set of defines.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary asserts for module index validation. Leave only one
that is actually necessary in mlxsw_env_pmpe_listener_func() where the
module index is directly read from the firmware event.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do the same as for other registers and have "mgpir_" prefix for the
MGPIR fields.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove obsolete API mlxsw_core_res_query_enabled(), which is only
relevant for end-of-life SwitchX-2 ASICs. Support for these ASICs was
removed in commit b0d80c013b ("mlxsw: Remove Mellanox SwitchX-2 ASIC
support").
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename labels for error flow handling in order to align with naming
convention used in rest of 'mlxsw' code.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace all local variables 'mlwsw_hwmon_attr' by 'mlxsw_hwmon_attr'.
All variable prefixes should start with 'mlxsw' according to the naming
convention, so 'mlwsw' is changed to 'mlxsw'.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver registers with both the hwmon and thermal subsystems.
Therefore, there is no need for the thermal subsystem to automatically
create hwmon entries upon registration of a thermal zone, as this
results in duplicate information.
Avoid creation of virtual hwmon objects by thermal subsystem by
registering a thermal zone with 'no_hwmon' set to 'true'.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only VLAN entries installed on the bridge device itself should be
considered when checking whether a packet with a specific VLAN can be
mirrored via a bridge device. VLAN entries only used to keep context
(i.e., entries with 'BRIDGE_VLAN_INFO_BRENTRY' unset) should be ignored.
Fix this by preventing mirroring when the VLAN entry does not have the
'BRIDGE_VLAN_INFO_BRENTRY' flag set.
Fixes: ddaff50470 ("mlxsw: spectrum: remove guards against !BRIDGE_VLAN_INFO_BRENTRY")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid trap group setting if driver is not capable of EMAD support.
For example, "mlxsw_minimal" driver works over I2C bus, overs which
EMADs cannot be sent.
Validation is performed by testing feature 'MLXSW_BUS_F_TXRX'.
Fixes: 74e0494d35 ("mlxsw: core: Move basic_trap_groups_set() call out of EMAD init code")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding myself (Alvin Šipraga) as another maintainer for the Realtek DSA
switch drivers. I intend to help Linus out with reviewing and testing
changes to these drivers, particularly the rtl8365mb driver which I
authored and have hardware access to.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These tests are supposed to check if the loop exited via a break or not.
However the tests are wrong because if we did not exit via a break then
"p" is not a valid pointer. In that case, it's the equivalent of
"if (*(u32 *)sr == *last_key) {". That's going to work most of the time,
but there is a potential for those to be equal.
Fixes: 1593123a6a ("tipc: add name table dump to new netlink api")
Fixes: 1a1a143daf ("tipc: add publication dump to new netlink api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
