mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-18 13:45:27 +00:00
80c80164a5
1312 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Libo Chen
|
39afe5d6fc |
sched/fair: Fix inaccurate tally of ttwu_move_affine
There are scenarios where non-affine wakeups are incorrectly counted as
affine wakeups by schedstats.
When wake_affine_idle() returns prev_cpu which doesn't equal to
nr_cpumask_bits, it will slip through the check: target == nr_cpumask_bits
in wake_affine() and be counted as if target == this_cpu in schedstats.
Replace target == nr_cpumask_bits with target != this_cpu to make sure
affine wakeups are accurately tallied.
Fixes:
|
||
|
Shrikanth Hegde
|
41abdba937 |
sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
CPU cfs bandwidth controller uses hrtimer. Currently there is no initial
value set. Hence all period timers would align at expiry.
This happens when there are multiple CPU cgroup's.
There is a performance gain that can be achieved here if the timers are
interleaved when the utilization of each CPU cgroup is low and total
utilization of all the CPU cgroup's is less than 50%. If the timers are
interleaved, then the unthrottled cgroup can run freely without many
context switches and can also benefit from SMT Folding. This effect will
be further amplified in SPLPAR environment.
This commit adds a random offset after initializing each hrtimer. This
would result in interleaving the timers at expiry, which helps in achieving
the said performance gain.
This was tested on powerpc platform with 8 core SMT=8. Socket power was
measured when the workload. Benchmarked the stress-ng with power
information. Throughput oriented benchmarks show significant gain up to
25% while power consumption increases up to 15%.
Workload: stress-ng --cpu=32 --cpu-ops=50000.
1CG - 1 cgroup is running.
2CG - 2 cgroups are running together.
Time taken to complete stress-ng in seconds and power is in watts.
each cgroup is throttled at 25% with 100ms as the period value.
6.2-rc6 | with patch
8 core 1CG power 2CG power | 1CG power 2 CG power
27.5 80.6 40 90 | 27.3 82 32.3 104
27.5 81 40.2 91 | 27.5 81 38.7 96
27.7 80 40.1 89 | 27.6 80 29.7 106
27.7 80.1 40.3 94 | 27.6 80 31.5 105
Latency might be affected by this change. That could happen if the CPU was
in a deep idle state which is possible if we interleave the timers. Used
schbench for measuring the latency. Each cgroup is throttled at 25% with
period value is set to 100ms. Numbers are when both the cgroups are
running simultaneously. Latency values don't degrade much. Some
improvement is seen in tail latencies.
6.2-rc6 with patch
Groups: 16
50.0th: 39.5 42.5
75.0th: 924.0 922.0
90.0th: 972.0 968.0
95.0th: 1005.5 994.0
99.0th: 4166.0 2287.0
99.5th: 7314.0 7448.0
99.9th: 15024.0 13600.0
Groups: 32
50.0th: 819.0 463.0
75.0th: 1596.0 918.0
90.0th: 5992.0 1281.5
95.0th: 13184.0 2765.0
99.0th: 21792.0 14240.0
99.5th: 25696.0 18920.0
99.9th: 33280.0 35776.0
Groups: 64
50.0th: 4806.0 3440.0
75.0th: 31136.0 33664.0
90.0th: 54144.0 58752.0
95.0th: 66176.0 67200.0
99.0th: 84736.0 91520.0
99.5th: 97408.0 114048.0
99.9th: 136448.0 140032.0
Initial RFC PATCH, discussions and details on the problem:
Link1: https://lore.kernel.org/lkml/5ae3cb09-8c9a-11e8-75a7-cc774d9bc283@linux.vnet.ibm.com/
Link2: https://lore.kernel.org/lkml/9c57c92c-3e0c-b8c5-4be9-8f4df344a347@linux.vnet.ibm.com/
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shrikanth Hegde<sshegde@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230223185153.1499710-1-sshegde@linux.vnet.ibm.com
|
||
|
Hao Jia
|
530bfad1d5 |
sched/core: Avoid selecting the task that is throttled to run when core-sched enable
When {rt, cfs}_rq or dl task is throttled, since cookied tasks
are not dequeued from the core tree, So sched_core_find() and
sched_core_next() may return throttled task, which may
cause throttled task to run on the CPU.
So we add checks in sched_core_find() and sched_core_next()
to make sure that the return is a runnable task that is
not throttled.
Co-developed-by: Cruz Zhao <CruzZhao@linux.alibaba.com>
Signed-off-by: Cruz Zhao <CruzZhao@linux.alibaba.com>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230316081806.69544-1-jiahao.os@bytedance.com
|
||
|
Vincent Guittot
|
a53ce18cac |
sched/fair: Sanitize vruntime of entity being migrated
Commit |
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Zhang Qiao
|
829c1651e9 |
sched/fair: sanitize vruntime of entity being placed
When a scheduling entity is placed onto cfs_rq, its vruntime is pulled to the base level (around cfs_rq->min_vruntime), so that the entity doesn't gain extra boost when placed backwards. However, if the entity being placed wasn't executed for a long time, its vruntime may get too far behind (e.g. while cfs_rq was executing a low-weight hog), which can inverse the vruntime comparison due to s64 overflow. This results in the entity being placed with its original vruntime way forwards, so that it will effectively never get to the cpu. To prevent that, ignore the vruntime of the entity being placed if it didn't execute for much longer than the characteristic sheduler time scale. [rkagan: formatted, adjusted commit log, comments, cutoff value] Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Co-developed-by: Roman Kagan <rkagan@amazon.de> Signed-off-by: Roman Kagan <rkagan@amazon.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20230130122216.3555094-1-rkagan@amazon.de |
||
|
Vincent Guittot
|
a2e90611b9 |
sched/fair: Remove capacity inversion detection
Remove the capacity inversion detection which is now handled by util_fits_cpu() returning -1 when we need to continue to look for a potential CPU with better performance. This ends up almost reverting patches below except for some comments: commit |
||
|
Vincent Guittot
|
e5ed0550c0 |
sched/fair: unlink misfit task from cpu overutilized
By taking into account uclamp_min, the 1:1 relation between task misfit and cpu overutilized is no more true as a task with a small util_avg may not fit a high capacity cpu because of uclamp_min constraint. Add a new state in util_fits_cpu() to reflect the case that task would fit a CPU except for the uclamp_min hint which is a performance requirement. Use -1 to reflect that a CPU doesn't fit only because of uclamp_min so we can use this new value to take additional action to select the best CPU that doesn't match uclamp_min hint. When util_fits_cpu() returns -1, we will continue to look for a possible CPU with better performance, which replaces Capacity Inversion detection with capacity_orig_of() - thermal_load_avg to detect a capacity inversion. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-and-tested-by: Qais Yousef <qyousef@layalina.io> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Link: https://lore.kernel.org/r/20230201143628.270912-2-vincent.guittot@linaro.org |
||
|
Liam R. Howlett
|
214dbc4281 |
sched: convert to vma iterator
Use the vma iterator so that the iterator can be invalidated or updated to avoid each caller doing so. Link: https://lkml.kernel.org/r/20230120162650.984577-23-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ingo Molnar
|
57a30218fa |
Linux 6.2-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh SDc/Y/c= =zpaD -----END PGP SIGNATURE----- Merge tag 'v6.2-rc6' into sched/core, to pick up fixes Pick up fixes before merging another batch of cpuidle updates. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
79ba1e607d |
sched/fair: Limit sched slice duration
In presence of a lot of small weight tasks like sched_idle tasks, normal or high weight tasks can see their ideal runtime (sched_slice) to increase to hundreds ms whereas it normally stays below sysctl_sched_latency. 2 normal tasks running on a CPU will have a max sched_slice of 12ms (half of the sched_period). This means that they will make progress every sysctl_sched_latency period. If we now add 1000 idle tasks on the CPU, the sched_period becomes 3006 ms and the ideal runtime of the normal tasks becomes 609 ms. It will even become 1500ms if the idle tasks belongs to an idle cgroup. This means that the scheduler will look for picking another waiting task after 609ms running time (1500ms respectively). The idle tasks change significantly the way the 2 normal tasks interleave their running time slot whereas they should have a small impact. Such long sched_slice can delay significantly the release of resources as the tasks can wait hundreds of ms before the next running slot just because of idle tasks queued on the rq. Cap the ideal_runtime to sysctl_sched_latency to make sure that tasks will regularly make progress and will not be significantly impacted by idle/background tasks queued on the rq. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20230113133613.257342-1-vincent.guittot@linaro.org |
||
|
Qais Yousef
|
da07d2f9c1 |
sched/fair: Fixes for capacity inversion detection
Traversing the Perf Domains requires rcu_read_lock() to be held and is
conditional on sched_energy_enabled(). Ensure right protections applied.
Also skip capacity inversion detection for our own pd; which was an
error.
Fixes:
|
||
|
Qais Yousef
|
e26fd28db8 |
sched/uclamp: Fix a uninitialized variable warnings
Addresses the following warnings:
> config: riscv-randconfig-m031-20221111
> compiler: riscv64-linux-gcc (GCC) 12.1.0
>
> smatch warnings:
> kernel/sched/fair.c:7263 find_energy_efficient_cpu() error: uninitialized symbol 'util_min'.
> kernel/sched/fair.c:7263 find_energy_efficient_cpu() error: uninitialized symbol 'util_max'.
Fixes:
|
||
|
Hao Jia
|
8589018acc |
sched/core: Adjusting the order of scanning CPU
When select_idle_capacity() starts scanning for an idle CPU, it starts with target CPU that has already been checked in select_idle_sibling(). So we start checking from the next CPU and try the target CPU at the end. Similarly for task_numa_assign(), we have just checked numa_migrate_on of dst_cpu, so start from the next CPU. This also works for steal_cookie_task(), the first scan must fail and start directly from the next one. Signed-off-by: Hao Jia <jiahao.os@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20221216062406.7812-3-jiahao.os@bytedance.com |
||
|
Hao Jia
|
feaed76376 |
sched/numa: Stop an exhastive search if an idle core is found
In update_numa_stats() we try to find an idle cpu on the NUMA node, preferably an idle core. we can stop looking for the next idle core or idle cpu after finding an idle core. But we can't stop the whole loop of scanning the CPU, because we need to calculate approximate NUMA stats at a point in time. For example, the src and dst nr_running is needed by task_numa_find_cpu(). Signed-off-by: Hao Jia <jiahao.os@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20221216062406.7812-2-jiahao.os@bytedance.com |
||
|
Matthew Wilcox (Oracle)
|
904cbab71d |
sched: Make const-safe
With a modified container_of() that preserves constness, the compiler finds some pointers which should have been marked as const. task_of() also needs to become const-preserving for the !FAIR_GROUP_SCHED case so that cfs_rq_of() can take a const argument. No change to generated code. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221212144946.2657785-1-willy@infradead.org |
||
|
Josh Don
|
8ad075c2eb |
sched: Async unthrottling for cfs bandwidth
CFS bandwidth currently distributes new runtime and unthrottles cfs_rq's inline in an hrtimer callback. Runtime distribution is a per-cpu operation, and unthrottling is a per-cgroup operation, since a tg walk is required. On machines with a large number of cpus and large cgroup hierarchies, this cpus*cgroups work can be too much to do in a single hrtimer callback: since IRQ are disabled, hard lockups may easily occur. Specifically, we've found this scalability issue on configurations with 256 cpus, O(1000) cgroups in the hierarchy being throttled, and high memory bandwidth usage. To fix this, we can instead unthrottle cfs_rq's asynchronously via a CSD. Each cpu is responsible for unthrottling itself, thus sharding the total work more fairly across the system, and avoiding hard lockups. Signed-off-by: Josh Don <joshdon@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221117005418.3499691-1-joshdon@google.com |
||
|
Linus Torvalds
|
8fa37a6835 |
sysctl changes for v6.2-rc1
Only step forward on the sysctl cleanups for this cycle. This has been on linux-next since September and this time it goes with a "Yeah, think so, it just moves stuff around a bit" from Peter Zijlstra. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmOYC3sSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinVEYQAL6/3nRt854jULd3zRwrWDyJZd5yxbnc R8jJBTt3q4CKwtMqd59uQqVYLpSqOCx/GsArfsXkmY4x7KYhlaSKcC4LHmFS8Z/u dofyVKumIFqtXMI+hYuTyqNqfGoK9UKXUftrqYb8pK+K3h73uqYbrDgSex4G9GJo Au0/WeDjTzLlgqt7RPN7n0PL2jMtfWVQkr3001OCQOWW9sdrOjtprn/3bDTUnW5q KukKB5saU0CvUzrTn2DaweQiRCJxQfCQfy3DZfhDRHVuWFYMV9b1okaGEoVmQlQT I9/urfdf3aLCdBBxCQG5W6uRxZwZ2Yb93M+rijZNWNFMC6WHrMCmSiADwz9LJzIK iQV7LoolGe1TFTEVJbsde5xKSF6BeId0IF5mmPQuokAx3TPE9279HNgluaB/38c8 p3P4+mP6qE12mMPyhpwDwNOzEWgUnLsGSIE5n/WPwxCiGNa7UsN2lzMDP1cJejp5 NlRg1hRKmgt30d9+t9sHeKMcWhrjxyPGsyUMwBJTuMCHbjqizGyBsB8DzyK95OoF aN66pyRqwsK0+IUivd8VfLgfriE2gDrQD5VqkJ8lfWBx9pq8RMEq7zQ1eE9IbCff hzbfG+7k9R3o4SPfJYmCBXtp6fcq+ovjbLYSvGGCJk0zfFe6SQE21rZ3hCQPq3v5 xKFh05xUfbRF =M48U -----END PGP SIGNATURE----- Merge tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "Only a small step forward on the sysctl cleanups for this cycle" * tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sched: Move numa_balancing sysctls to its own file |
||
|
Linus Torvalds
|
8702f2c611 |
Non-MM patches for 6.2-rc1.
- A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line. - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files. - A series from Yang Yingliang to address rapido memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t(). - And a whole shower of singleton patches all over the place. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5efRgAKCRDdBJ7gKXxA jgvdAP0al6oFDtaSsshIdNhrzcMwfjt6PfVxxHdLmNhF1hX2dwD/SVluS1bPSP7y 0sZp7Ustu3YTb8aFkMl96Y9m9mY1Nwg= =ga5B -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files - A series from Yang Yingliang to address rapidio memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t() - And a whole shower of singleton patches all over the place * tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits) ipc: fix memory leak in init_mqueue_fs() hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount rapidio: devices: fix missing put_device in mport_cdev_open kcov: fix spelling typos in comments hfs: Fix OOB Write in hfs_asc2mac hfs: fix OOB Read in __hfs_brec_find relay: fix type mismatch when allocating memory in relay_create_buf() ocfs2: always read both high and low parts of dinode link count io-mapping: move some code within the include guarded section kernel: kcsan: kcsan_test: build without structleak plugin mailmap: update email for Iskren Chernev eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD rapidio: fix possible UAF when kfifo_alloc() fails relay: use strscpy() is more robust and safer cpumask: limit visibility of FORCE_NR_CPUS acct: fix potential integer overflow in encode_comp_t() acct: fix accuracy loss for input value of encode_comp_t() linux/init.h: include <linux/build_bug.h> and <linux/stringify.h> rapidio: rio: fix possible name leak in rio_register_mport() rapidio: fix possible name leaks when rio_add_device() fails ... |
||
|
Kefeng Wang
|
0dff89c448 |
sched: Move numa_balancing sysctls to its own file
The sysctl_numa_balancing_promote_rate_limit and sysctl_numa_balancing are part of sched, move them to its own file. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Uros Bizjak
|
8baceabca6 |
sched/fair: use try_cmpxchg in task_numa_work
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in task_numa_work. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). No functional change intended. Link: https://lkml.kernel.org/r/20220822173956.82525-1-ubizjak@gmail.com Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Pierre Gondois
|
ad841e569f |
sched/fair: Check if prev_cpu has highest spare cap in feec()
When evaluating the CPU candidates in the perf domain (pd) containing the previously used CPU (prev_cpu), find_energy_efficient_cpu() evaluates the energy of the pd: - without the task (base_energy) - with the task placed on prev_cpu (if the task fits) - with the task placed on the CPU with the highest spare capacity, prev_cpu being excluded from this set If prev_cpu is already the CPU with the highest spare capacity, max_spare_cap_cpu will be the CPU with the second highest spare capacity. On an Arm64 Juno-r2, with a workload of 10 tasks at a 10% duty cycle, when prev_cpu and max_spare_cap_cpu are both valid candidates, prev_spare_cap > max_spare_cap at ~82%. Thus the energy of the pd when placing the task on max_spare_cap_cpu is computed with no possible positive outcome 82% most of the time. Do not consider max_spare_cap_cpu as a valid candidate if prev_spare_cap > max_spare_cap. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20221006081052.3862167-2-pierre.gondois@arm.com |
||
|
Qais Yousef
|
aa69c36f31 |
sched/fair: Consider capacity inversion in util_fits_cpu()
We do consider thermal pressure in util_fits_cpu() for uclamp_min only. With the exception of the biggest cores which by definition are the max performance point of the system and all tasks by definition should fit. Even under thermal pressure, the capacity of the biggest CPU is the highest in the system and should still fit every task. Except when it reaches capacity inversion point, then this is no longer true. We can handle this by using the inverted capacity as capacity_orig in util_fits_cpu(). Which not only addresses the problem above, but also ensure uclamp_max now considers the inverted capacity. Force fitting a task when a CPU is in this adverse state will contribute to making the thermal throttling last longer. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220804143609.515789-10-qais.yousef@arm.com |
||
|
Qais Yousef
|
44c7b80bff |
sched/fair: Detect capacity inversion
Check each performance domain to see if thermal pressure is causing its capacity to be lower than another performance domain. We assume that each performance domain has CPUs with the same capacities, which is similar to an assumption made in energy_model.c We also assume that thermal pressure impacts all CPUs in a performance domain equally. If there're multiple performance domains with the same capacity_orig, we will trigger a capacity inversion if the domain is under thermal pressure. The new cpu_in_capacity_inversion() should help users to know when information about capacity_orig are not reliable and can opt in to use the inverted capacity as the 'actual' capacity_orig. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220804143609.515789-9-qais.yousef@arm.com |
||
|
Qais Yousef
|
d81304bc61 |
sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition
If the utilization of the woken up task is 0, we skip the energy
calculation because it has no impact.
But if the task is boosted (uclamp_min != 0) will have an impact on task
placement and frequency selection. Only skip if the util is truly
0 after applying uclamp values.
Change uclamp_task_cpu() signature to avoid unnecessary additional calls
to uclamp_eff_get(). feec() is the only user now.
Fixes:
|
||
|
Qais Yousef
|
c56ab1b350 |
sched/uclamp: Make cpu_overutilized() use util_fits_cpu()
So that it is now uclamp aware.
This fixes a major problem of busy tasks capped with UCLAMP_MAX keeping
the system in overutilized state which disables EAS and leads to wasting
energy in the long run.
Without this patch running a busy background activity like JIT
compilation on Pixel 6 causes the system to be in overutilized state
74.5% of the time.
With this patch this goes down to 9.79%.
It also fixes another problem when long running tasks that have their
UCLAMP_MIN changed while running such that they need to upmigrate to
honour the new UCLAMP_MIN value. The upmigration doesn't get triggered
because overutilized state never gets set in this state, hence misfit
migration never happens at tick in this case until the task wakes up
again.
Fixes:
|
||
|
Qais Yousef
|
a2e7f03ed2 |
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
s/asym_fits_capacity/asym_fits_cpu/ to better reflect what it does now.
Fixes:
|
||
|
Qais Yousef
|
b759caa1d9 |
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
Fixes:
|
||
|
Qais Yousef
|
244226035a |
sched/uclamp: Fix fits_capacity() check in feec()
As reported by Yun Hsiang [1], if a task has its uclamp_min >= 0.8 * 1024,
it'll always pick the previous CPU because fits_capacity() will always
return false in this case.
The new util_fits_cpu() logic should handle this correctly for us beside
more corner cases where similar failures could occur, like when using
UCLAMP_MAX.
We open code uclamp_rq_util_with() except for the clamp() part,
util_fits_cpu() needs the 'raw' values to be passed to it.
Also introduce uclamp_rq_{set, get}() shorthand accessors to get uclamp
value for the rq. Makes the code more readable and ensures the right
rules (use READ_ONCE/WRITE_ONCE) are respected transparently.
[1] https://lists.linaro.org/pipermail/eas-dev/2020-July/001488.html
Fixes:
|
||
|
Qais Yousef
|
b48e16a697 |
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
So that the new uclamp rules in regard to migration margin and capacity
pressure are taken into account correctly.
Fixes:
|
||
|
Qais Yousef
|
48d5e9daa8 |
sched/uclamp: Fix relationship between uclamp and migration margin
fits_capacity() verifies that a util is within 20% margin of the
capacity of a CPU, which is an attempt to speed up upmigration.
But when uclamp is used, this 20% margin is problematic because for
example if a task is boosted to 1024, then it will not fit on any CPU
according to fits_capacity() logic.
Or if a task is boosted to capacity_orig_of(medium_cpu). The task will
end up on big instead on the desired medium CPU.
Similar corner cases exist for uclamp and usage of capacity_of().
Slightest irq pressure on biggest CPU for example will make a 1024
boosted task look like it can't fit.
What we really want is for uclamp comparisons to ignore the migration
margin and capacity pressure, yet retain them for when checking the
_actual_ util signal.
For example, task p:
p->util_avg = 300
p->uclamp[UCLAMP_MIN] = 1024
Will fit a big CPU. But
p->util_avg = 900
p->uclamp[UCLAMP_MIN] = 1024
will not, this should trigger overutilized state because the big CPU is
now *actually* being saturated.
Similar reasoning applies to capping tasks with UCLAMP_MAX. For example:
p->util_avg = 1024
p->uclamp[UCLAMP_MAX] = capacity_orig_of(medium_cpu)
Should fit the task on medium cpus without triggering overutilized
state.
Inlined comments expand more on desired behavior in more scenarios.
Introduce new util_fits_cpu() function which encapsulates the new logic.
The new function is not used anywhere yet, but will be used to update
various users of fits_capacity() in later patches.
Fixes:
|
||
|
Linus Torvalds
|
27bc50fc90 |
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam R. Howlett. An overlapping range-based tree for vmas. It it apparently slight more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com). This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU= =xfWx -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ... |
||
|
Matthew Wilcox (Oracle)
|
0cd4d02c32 |
sched: use maple tree iterator to walk VMAs
The linked list is slower than walking the VMAs using the maple tree. We can't use the VMA iterator here because it doesn't support moving to an earlier position. Link: https://lkml.kernel.org/r/20220906194824.2110408-49-Liam.Howlett@oracle.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Aneesh Kumar K.V
|
467b171af8 |
mm/demotion: update node_is_toptier to work with memory tiers
With memory tier support we can have memory only NUMA nodes in the top tier from which we want to avoid promotion tracking NUMA faults. Update node_is_toptier to work with memory tiers. All NUMA nodes are by default top tier nodes. With lower(slower) memory tiers added we consider all memory tiers above a memory tier having CPU NUMA nodes as a top memory tier [sj@kernel.org: include missed header file, memory-tiers.h] Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org [akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h] [aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers] Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Wei Xu <weixugc@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Bharata B Rao <bharata@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hesham Almatary <hesham.almatary@huawei.com> Cc: Jagdish Gediya <jvgediya.oss@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Vincent Guittot
|
7e9518baed |
sched/fair: Move call to list_last_entry() in detach_tasks
Move the call to list_last_entry() in detach_tasks() after testing loop_max and loop_break. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220825122726.20819-4-vincent.guittot@linaro.org |
||
|
Vincent Guittot
|
c59862f826 |
sched/fair: Cleanup loop_max and loop_break
sched_nr_migrate_break is set to a fix value and never changes so we can replace it by a define SCHED_NR_MIGRATE_BREAK. Also, we adjust SCHED_NR_MIGRATE_BREAK to be aligned with the init value of sysctl_sched_nr_migrate which can be init to different values. Then, use SCHED_NR_MIGRATE_BREAK to init sysctl_sched_nr_migrate. The behavior stays unchanged unless you modify sysctl_sched_nr_migrate trough debugfs. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220825122726.20819-3-vincent.guittot@linaro.org |
||
|
Vincent Guittot
|
b0defa7ae0 |
sched/fair: Make sure to try to detach at least one movable task
During load balance, we try at most env->loop_max time to move a task. But it can happen that the loop_max LRU tasks (ie tail of the cfs_tasks list) can't be moved to dst_cpu because of affinity. In this case, loop in the list until we found at least one. The maximum of detached tasks remained the same as before. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220825122726.20819-2-vincent.guittot@linaro.org |
||
|
Huang Ying
|
c959924b0d |
memory tiering: adjust hot threshold automatically
The promotion hot threshold is workload and system configuration dependent. So in this patch, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. If the hint page fault latency of a page is less than the hot threshold, we will try to promote the page, and the page is called the candidate promotion page. If the number of the candidate promotion pages in the statistics interval is much more than the promotion rate limit, the hot threshold will be decreased to reduce the number of the candidate promotion pages. Otherwise, the hot threshold will be increased to increase the number of the candidate promotion pages. To make the above method works, in each statistics interval, the total number of the pages to check (on which the hint page faults occur) and the hot/cold distribution need to be stable. Because the page tables are scanned linearly in NUMA balancing, but the hot/cold distribution isn't uniform along the address usually, the statistics interval should be larger than the NUMA balancing scan period. So in the patch, the max scan period is used as statistics interval and it works well in our tests. Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: osalvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Huang Ying
|
c6833e1000 |
memory tiering: rate limit NUMA migration throughput
In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patch as the page promotion rate limit mechanism. The number of the candidate pages to be promoted to the fast memory node via NUMA balancing is counted, if the count exceeds the limit specified by the users, the NUMA balancing promotion will be stopped until the next second. A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added for the users to specify the limit. Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: osalvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Huang Ying
|
33024536ba |
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Peter Zijlstra
|
0b9d46fc5e |
sched: Rename task_running() to task_on_cpu()
There is some ambiguity about task_running() in that it is unrelated to TASK_RUNNING but instead tests ->on_cpu. As such, rename the thing task_on_cpu(). Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Yxhkhn55uHZx+NGl@hirez.programming.kicks-ass.net |
||
|
Abel Wu
|
96c1c0cfe4 |
sched/fair: Cleanup for SIS_PROP
The sched-domain of this cpu is only used for some heuristics when SIS_PROP is enabled, and it should be irrelevant whether the local sd_llc is valid or not, since all we care about is target sd_llc if !SIS_PROP. Access the local domain only when there is a need. Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20220907112000.1854-6-wuyun.abel@bytedance.com |
||
|
Abel Wu
|
398ba2b0cc |
sched/fair: Default to false in test_idle_cores()
It's uncertain whether idle cores exist or not if shared sched- domains are not ready, so returning "no idle cores" usually makes sense. While __update_idle_core() is an exception, it checks status of this core and set hint to shared sched-domain if necessary. So the whole logic of this function depends on the existence of shared sched-domain, and can certainly bail out early if it is not available. It's somehow a little tricky, and as Josh suggested that it should be transient while the domain isn't ready. So remove the self-defined default value to make things more clearer. Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Don <joshdon@google.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220907112000.1854-5-wuyun.abel@bytedance.com |
||
|
Abel Wu
|
8eeeed9c4a |
sched/fair: Remove useless check in select_idle_core()
The function select_idle_core() only gets called when has_idle_cores is true which can be possible only when sched_smt_present is enabled. This change also aligns select_idle_core() with select_idle_smt() in the way that the caller do the check if necessary. Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220907112000.1854-4-wuyun.abel@bytedance.com |
||
|
Abel Wu
|
b9bae70440 |
sched/fair: Avoid double search on same cpu
The prev cpu is checked at the beginning of SIS, and it's unlikely to be idle before the second check in select_idle_smt(). So we'd better focus on its SMT siblings. Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Don <joshdon@google.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220907112000.1854-3-wuyun.abel@bytedance.com |
||
|
Abel Wu
|
3e6efe87cd |
sched/fair: Remove redundant check in select_idle_smt()
If two cpus share LLC cache, then the two cores they belong to are also in the same LLC domain. Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Don <joshdon@google.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220907112000.1854-2-wuyun.abel@bytedance.com |
||
|
Ingo Molnar
|
53aa930dc4 |
Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit
Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Chengming Zhou
|
e4fe074d6c |
sched/fair: Don't init util/runnable_avg for !fair task
post_init_entity_util_avg() init task util_avg according to the cpu util_avg at the time of fork, which will decay when switched_to_fair() some time later, we'd better to not set them at all in the case of !fair task. Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20220818124805.601-10-zhouchengming@bytedance.com |
||
|
Chengming Zhou
|
d6531ab6e5 |
sched/fair: Move task sched_avg attach to enqueue_task_fair()
When wake_up_new_task(), we use post_init_entity_util_avg() to init
util_avg/runnable_avg based on cpu's util_avg at that time, and
attach task sched_avg to cfs_rq.
Since enqueue_task_fair() -> enqueue_entity() -> update_load_avg()
loop will do attach, we can move this work to update_load_avg().
wake_up_new_task(p)
post_init_entity_util_avg(p)
attach_entity_cfs_rq() --> (1)
activate_task(rq, p)
enqueue_task() := enqueue_task_fair()
enqueue_entity() loop
update_load_avg(cfs_rq, se, UPDATE_TG | DO_ATTACH)
if (!se->avg.last_update_time && (flags & DO_ATTACH))
attach_entity_load_avg() --> (2)
This patch move attach from (1) to (2), update related comments too.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-9-zhouchengming@bytedance.com
|
||
|
Chengming Zhou
|
df16b71c68 |
sched/fair: Allow changing cgroup of new forked task
commit
|
||
|
Chengming Zhou
|
7e2edaf618 |
sched/fair: Fix another detach on unattached task corner case
commit
|
||
|
Chengming Zhou
|
e1f078f504 |
sched/fair: Combine detach into dequeue when migrating task
When we are migrating task out of the CPU, we can combine detach and
propagation into dequeue_entity() to save the detach_entity_cfs_rq()
in migrate_task_rq_fair().
This optimization is like combining DO_ATTACH in the enqueue_entity()
when migrating task to the CPU. So we don't have to traverse the CFS tree
extra time to do the detach_entity_cfs_rq() -> propagate_entity_cfs_rq(),
which wouldn't be called anymore with this patch's change.
detach_task()
deactivate_task()
dequeue_task_fair()
for_each_sched_entity(se)
dequeue_entity()
update_load_avg() /* (1) */
detach_entity_load_avg()
set_task_cpu()
migrate_task_rq_fair()
detach_entity_cfs_rq() /* (2) */
update_load_avg();
detach_entity_load_avg();
propagate_entity_cfs_rq();
for_each_sched_entity()
update_load_avg()
This patch save the detach_entity_cfs_rq() called in (2) by doing
the detach_entity_load_avg() for a CPU migrating task inside (1)
(the task being the first se in the loop)
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-6-zhouchengming@bytedance.com
|
||
|
Chengming Zhou
|
859f206290 |
sched/fair: Update comments in enqueue/dequeue_entity()
When reading the sched_avg related code, I found the comments in enqueue/dequeue_entity() are not updated with the current code. We don't add/subtract entity's runnable_avg from cfs_rq->runnable_avg during enqueue/dequeue_entity(), those are done only for attach/detach. This patch updates the comments to reflect the current code working. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20220818124805.601-5-zhouchengming@bytedance.com |
||
|
Chengming Zhou
|
5d6da83c44 |
sched/fair: Reset sched_avg last_update_time before set_task_rq()
set_task_rq() -> set_task_rq_fair() will try to synchronize the blocked task's sched_avg when migrate, which is not needed for already detached task. task_change_group_fair() will detached the task sched_avg from prev cfs_rq first, so reset sched_avg last_update_time before set_task_rq() to avoid that. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20220818124805.601-4-zhouchengming@bytedance.com |
||
|
Chengming Zhou
|
39c4261191 |
sched/fair: Remove redundant cpu_cgrp_subsys->fork()
We use cpu_cgrp_subsys->fork() to set task group for the new fair task
in cgroup_post_fork().
Since commit
|
||
|
Chengming Zhou
|
78b6b15770 |
sched/fair: Maintain task se depth in set_task_rq()
Previously we only maintain task se depth in task_move_group_fair(), if a !fair task change task group, its se depth will not be updated, so commit |
||
|
Ingo Molnar
|
09348d75a6 |
sched/all: Change all BUG_ON() instances in the scheduler to WARN_ON_ONCE()
There's no good reason to crash a user's system with a BUG_ON(), chances are high that they'll never even see the crash message on Xorg, and it won't make it into the syslog either. By using a WARN_ON_ONCE() we at least give the user a chance to report any bugs triggered here - instead of getting silent hangs. None of these WARN_ON_ONCE()s are supposed to trigger, ever - so we ignore cases where a NULL check is done via a BUG_ON() and we let a NULL pointer through after a WARN_ON_ONCE(). There's one exception: WARN_ON_ONCE() arguments with side-effects, such as locking - in this case we use the return value of the WARN_ON_ONCE(), such as in: - BUG_ON(!lock_task_sighand(p, &flags)); + if (WARN_ON_ONCE(!lock_task_sighand(p, &flags))) + return; Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/YvSsKcAXISmshtHo@gmail.com |
||
|
Bing Huang
|
18c31c9711 |
sched/fair: Make per-cpu cpumasks static
The load_balance_mask and select_rq_mask percpu variables are only used in kernel/sched/fair.c. Make them static and move their allocation into init_sched_fair_class(). Replace kzalloc_node() with zalloc_cpumask_var_node() to get rid of the CONFIG_CPUMASK_OFFSTACK #ifdef and to align with per-cpu cpumask allocation for RT (local_cpu_mask in init_sched_rt_class()) and DL class (local_cpu_mask_dl in init_sched_dl_class()). [ mingo: Tidied up changelog & touched up the code. ] Signed-off-by: Bing Huang <huangbing@kylinos.cn> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20220722213609.3901-1-huangbing775@126.com |
||
|
Hao Jia
|
d985ee9f44 |
sched/fair: Remove unused parameter idle of _nohz_idle_balance()
After commit
|
||
|
Dietmar Eggemann
|
740cf8a760 |
sched/core: Introduce sched_asym_cpucap_active()
Create an inline helper for conditional code to be only executed on asymmetric CPU capacity systems. This makes these (currently ~10 and future) conditions a lot more readable. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20220729111305.1275158-2-dietmar.eggemann@arm.com |
||
|
Vincent Guittot
|
c82a69629c |
sched/fair: fix case with reduced capacity CPU
The capacity of the CPU available for CFS tasks can be reduced because of other activities running on the latter. In such case, it's worth trying to move CFS tasks on a CPU with more available capacity. The rework of the load balance has filtered the case when the CPU is classified to be fully busy but its capacity is reduced. Check if CPU's capacity is reduced while gathering load balance statistic and classify it group_misfit_task instead of group_fully_busy so we can try to move the load on another CPU. Reported-by: David Chen <david.chen@nutanix.com> Reported-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: David Chen <david.chen@nutanix.com> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Link: https://lkml.kernel.org/r/20220708154401.21411-1-vincent.guittot@linaro.org |
||
|
Vincent Donnefort
|
b812fc9768 |
sched/fair: Remove the energy margin in feec()
find_energy_efficient_cpu() integrates a margin to protect tasks from bouncing back and forth from a CPU to another. This margin is set as being 6% of the total current energy estimated on the system. This however does not work for two reasons: 1. The energy estimation is not a good absolute value: compute_energy() used in feec() is a good estimation for task placement as it allows to compare the energy with and without a task. The computed delta will give a good overview of the cost for a certain task placement. It, however, doesn't work as an absolute estimation for the total energy of the system. First it adds the contribution to idle CPUs into the energy, second it mixes util_avg with util_est values. util_avg contains the near history for a CPU usage, it doesn't tell at all what the current utilization is. A system that has been quite busy in the near past will hold a very high energy and then a high margin preventing any task migration to a lower capacity CPU, wasting energy. It even creates a negative feedback loop: by holding the tasks on a less efficient CPU, the margin contributes in keeping the energy high. 2. The margin handicaps small tasks: On a system where the workload is composed mostly of small tasks (which is often the case on Android), the overall energy will be high enough to create a margin none of those tasks can cross. On a Pixel4, a small utilization of 5% on all the CPUs creates a global estimated energy of 140 joules, as per the Energy Model declaration of that same device. This means, after applying the 6% margin that any migration must save more than 8 joules to happen. No task with a utilization lower than 40 would then be able to migrate away from the biggest CPU of the system. The 6% of the overall system energy was brought by the following patch: ( |
||
|
Vincent Donnefort
|
3e8c6c9aac |
sched/fair: Remove task_util from effective utilization in feec()
The energy estimation in find_energy_efficient_cpu() (feec()) relies on
the computation of the effective utilization for each CPU of a perf domain
(PD). This effective utilization is then used as an estimation of the busy
time for this pd. The function effective_cpu_util() which gives this value,
scales the utilization relative to IRQ pressure on the CPU to take into
account that the IRQ time is hidden from the task clock. The IRQ scaling is
as follow:
effective_cpu_util = irq + (cpu_cap - irq)/cpu_cap * util
Where util is the sum of CFS/RT/DL utilization, cpu_cap the capacity of
the CPU and irq the IRQ avg time.
If now we take as an example a task placement which doesn't raise the OPP
on the candidate CPU, we can write the energy delta as:
delta = OPPcost/cpu_cap * (effective_cpu_util(cpu_util + task_util) -
effective_cpu_util(cpu_util))
= OPPcost/cpu_cap * (cpu_cap - irq)/cpu_cap * task_util
We end-up with an energy delta depending on the IRQ avg time, which is a
problem: first the time spent on IRQs by a CPU has no effect on the
additional energy that would be consumed by a task. Second, we don't want
to favour a CPU with a higher IRQ avg time value.
Nonetheless, we need to take the IRQ avg time into account. If a task
placement raises the PD's frequency, it will increase the energy cost for
the entire time where the CPU is busy. A solution is to only use
effective_cpu_util() with the CPU contribution part. The task contribution
is added separately and scaled according to prev_cpu's IRQ time.
No change for the FREQUENCY_UTIL component of the energy estimation. We
still want to get the actual frequency that would be selected after the
task placement.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-7-vdonnefort@google.com
|
||
|
Dietmar Eggemann
|
9b340131a4 |
sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
The Perf Domain (PD) cpumask (struct em_perf_domain.cpus) stays invariant after Energy Model creation, i.e. it is not updated after CPU hotplug operations. That's why the PD mask is used in conjunction with the cpu_online_mask (or Sched Domain cpumask). Thereby the cpu_online_mask is fetched multiple times (in compute_energy()) during a run-queue selection for a task. cpu_online_mask may change during this time which can lead to wrong energy calculations. To be able to avoid this, use the select_rq_mask per-cpu cpumask to create a cpumask out of PD cpumask and cpu_online_mask and pass it through the function calls of the EAS run-queue selection path. The PD cpumask for max_spare_cap_cpu/compute_prev_delta selection (find_energy_efficient_cpu()) is now ANDed not only with the SD mask but also with the cpu_online_mask. This is fine since this cpumask has to be in syc with the one used for energy computation (compute_energy()). An exclusive cpuset setup with at least one asymmetric CPU capacity island (hence the additional AND with the SD cpumask) is the obvious exception here. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-6-vdonnefort@google.com |
||
|
Dietmar Eggemann
|
ec4fc801a0 |
sched/fair: Rename select_idle_mask to select_rq_mask
On 21/06/2022 11:04, Vincent Donnefort wrote:
> From: Dietmar Eggemann <dietmar.eggemann@arm.com>
https://lkml.kernel.org/r/202206221253.ZVyGQvPX-lkp@intel.com discovered
that this patch doesn't build anymore (on tip sched/core or linux-next)
because of commit
|
||
|
Dietmar Eggemann
|
bb44799949 |
sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
effective_cpu_util() already has a `int cpu' parameter which allows to retrieve the CPU capacity scale factor (or maximum CPU capacity) inside this function via an arch_scale_cpu_capacity(cpu). A lot of code calling effective_cpu_util() (or the shim sched_cpu_util()) needs the maximum CPU capacity, i.e. it will call arch_scale_cpu_capacity() already. But not having to pass it into effective_cpu_util() will make the EAS wake-up code easier, especially when the maximum CPU capacity reduced by the thermal pressure is passed through the EAS wake-up functions. Due to the asymmetric CPU capacity support of arm/arm64 architectures, arch_scale_cpu_capacity(int cpu) is a per-CPU variable read access via per_cpu(cpu_scale, cpu) on such a system. On all other architectures it is a a compile-time constant (SCHED_CAPACITY_SCALE). Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-4-vdonnefort@google.com |
||
|
Vincent Donnefort
|
e2f3e35f1f |
sched/fair: Decay task PELT values during wakeup migration
Before being migrated to a new CPU, a task sees its PELT values synchronized with rq last_update_time. Once done, that same task will also have its sched_avg last_update_time reset. This means the time between the migration and the last clock update will not be accounted for in util_avg and a discontinuity will appear. This issue is amplified by the PELT clock scaling. It takes currently one tick after the CPU being idle to let clock_pelt catching up clock_task. This is especially problematic for asymmetric CPU capacity systems which need stable util_avg signals for task placement and energy estimation. Ideally, this problem would be solved by updating the runqueue clocks before the migration. But that would require taking the runqueue lock which is quite expensive [1]. Instead estimate the missing time and update the task util_avg with that value. To that end, we need sched_clock_cpu() but it is a costly function. Limit the usage to the case where the source CPU is idle as we know this is when the clock is having the biggest risk of being outdated. See comment in migrate_se_pelt_lag() for more details about how the PELT value is estimated. Notice though this estimation doesn't take into account IRQ and Paravirt time. [1] https://lkml.kernel.org/r/20190709115759.10451-1-chris.redpath@arm.com Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-3-vdonnefort@google.com |
||
|
Vincent Donnefort
|
d05b43059d |
sched/fair: Provide u64 read for 32-bits arch helper
Introducing macro helpers u64_u32_{store,load}() to factorize lockless
accesses to u64 variables for 32-bits architectures.
Users are for now cfs_rq.min_vruntime and sched_avg.last_update_time. To
accommodate the later where the copy lies outside of the structure
(cfs_rq.last_udpate_time_copy instead of sched_avg.last_update_time_copy),
use the _copy() version of those helpers.
Those new helpers encapsulate smp_rmb() and smp_wmb() synchronization and
therefore, have a small penalty for 32-bits machines in set_task_rq_fair()
and init_cfs_rq().
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-2-vdonnefort@google.com
|
||
|
Chen Yu
|
70fb5ccf2e |
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
[Problem Statement]
select_idle_cpu() might spend too much time searching for an idle CPU,
when the system is overloaded.
The following histogram is the time spent in select_idle_cpu(),
when running 224 instances of netperf on a system with 112 CPUs
per LLC domain:
@usecs:
[0] 533 | |
[1] 5495 | |
[2, 4) 12008 | |
[4, 8) 239252 | |
[8, 16) 4041924 |@@@@@@@@@@@@@@ |
[16, 32) 12357398 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32, 64) 14820255 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[64, 128) 13047682 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[128, 256) 8235013 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[256, 512) 4507667 |@@@@@@@@@@@@@@@ |
[512, 1K) 2600472 |@@@@@@@@@ |
[1K, 2K) 927912 |@@@ |
[2K, 4K) 218720 | |
[4K, 8K) 98161 | |
[8K, 16K) 37722 | |
[16K, 32K) 6715 | |
[32K, 64K) 477 | |
[64K, 128K) 7 | |
netperf latency usecs:
=======
case load Lat_99th std%
TCP_RR thread-224 257.39 ( 0.21)
The time spent in select_idle_cpu() is visible to netperf and might have a negative
impact.
[Symptom analysis]
The patch [1] from Mel Gorman has been applied to track the efficiency
of select_idle_sibling. Copy the indicators here:
SIS Search Efficiency(se_eff%):
A ratio expressed as a percentage of runqueues scanned versus
idle CPUs found. A 100% efficiency indicates that the target,
prev or recent CPU of a task was idle at wakeup. The lower the
efficiency, the more runqueues were scanned before an idle CPU
was found.
SIS Domain Search Efficiency(dom_eff%):
Similar, except only for the slower SIS
patch.
SIS Fast Success Rate(fast_rate%):
Percentage of SIS that used target, prev or
recent CPUs.
SIS Success rate(success_rate%):
Percentage of scans that found an idle CPU.
The test is based on Aubrey's schedtests tool, including netperf, hackbench,
schbench and tbench.
Test on vanilla kernel:
schedstat_parse.py -f netperf_vanilla.log
case load se_eff% dom_eff% fast_rate% success_rate%
TCP_RR 28 threads 99.978 18.535 99.995 100.000
TCP_RR 56 threads 99.397 5.671 99.964 100.000
TCP_RR 84 threads 21.721 6.818 73.632 100.000
TCP_RR 112 threads 12.500 5.533 59.000 100.000
TCP_RR 140 threads 8.524 4.535 49.020 100.000
TCP_RR 168 threads 6.438 3.945 40.309 99.999
TCP_RR 196 threads 5.397 3.718 32.320 99.982
TCP_RR 224 threads 4.874 3.661 25.775 99.767
UDP_RR 28 threads 99.988 17.704 99.997 100.000
UDP_RR 56 threads 99.528 5.977 99.970 100.000
UDP_RR 84 threads 24.219 6.992 76.479 100.000
UDP_RR 112 threads 13.907 5.706 62.538 100.000
UDP_RR 140 threads 9.408 4.699 52.519 100.000
UDP_RR 168 threads 7.095 4.077 44.352 100.000
UDP_RR 196 threads 5.757 3.775 35.764 99.991
UDP_RR 224 threads 5.124 3.704 28.748 99.860
schedstat_parse.py -f schbench_vanilla.log
(each group has 28 tasks)
case load se_eff% dom_eff% fast_rate% success_rate%
normal 1 mthread 99.152 6.400 99.941 100.000
normal 2 mthreads 97.844 4.003 99.908 100.000
normal 3 mthreads 96.395 2.118 99.917 99.998
normal 4 mthreads 55.288 1.451 98.615 99.804
normal 5 mthreads 7.004 1.870 45.597 61.036
normal 6 mthreads 3.354 1.346 20.777 34.230
normal 7 mthreads 2.183 1.028 11.257 21.055
normal 8 mthreads 1.653 0.825 7.849 15.549
schedstat_parse.py -f hackbench_vanilla.log
(each group has 28 tasks)
case load se_eff% dom_eff% fast_rate% success_rate%
process-pipe 1 group 99.991 7.692 99.999 100.000
process-pipe 2 groups 99.934 4.615 99.997 100.000
process-pipe 3 groups 99.597 3.198 99.987 100.000
process-pipe 4 groups 98.378 2.464 99.958 100.000
process-pipe 5 groups 27.474 3.653 89.811 99.800
process-pipe 6 groups 20.201 4.098 82.763 99.570
process-pipe 7 groups 16.423 4.156 77.398 99.316
process-pipe 8 groups 13.165 3.920 72.232 98.828
process-sockets 1 group 99.977 5.882 99.999 100.000
process-sockets 2 groups 99.927 5.505 99.996 100.000
process-sockets 3 groups 99.397 3.250 99.980 100.000
process-sockets 4 groups 79.680 4.258 98.864 99.998
process-sockets 5 groups 7.673 2.503 63.659 92.115
process-sockets 6 groups 4.642 1.584 58.946 88.048
process-sockets 7 groups 3.493 1.379 49.816 81.164
process-sockets 8 groups 3.015 1.407 40.845 75.500
threads-pipe 1 group 99.997 0.000 100.000 100.000
threads-pipe 2 groups 99.894 2.932 99.997 100.000
threads-pipe 3 groups 99.611 4.117 99.983 100.000
threads-pipe 4 groups 97.703 2.624 99.937 100.000
threads-pipe 5 groups 22.919 3.623 87.150 99.764
threads-pipe 6 groups 18.016 4.038 80.491 99.557
threads-pipe 7 groups 14.663 3.991 75.239 99.247
threads-pipe 8 groups 12.242 3.808 70.651 98.644
threads-sockets 1 group 99.990 6.667 99.999 100.000
threads-sockets 2 groups 99.940 5.114 99.997 100.000
threads-sockets 3 groups 99.469 4.115 99.977 100.000
threads-sockets 4 groups 87.528 4.038 99.400 100.000
threads-sockets 5 groups 6.942 2.398 59.244 88.337
threads-sockets 6 groups 4.359 1.954 49.448 87.860
threads-sockets 7 groups 2.845 1.345 41.198 77.102
threads-sockets 8 groups 2.871 1.404 38.512 74.312
schedstat_parse.py -f tbench_vanilla.log
case load se_eff% dom_eff% fast_rate% success_rate%
loopback 28 threads 99.976 18.369 99.995 100.000
loopback 56 threads 99.222 7.799 99.934 100.000
loopback 84 threads 19.723 6.819 70.215 100.000
loopback 112 threads 11.283 5.371 55.371 99.999
loopback 140 threads 0.000 0.000 0.000 0.000
loopback 168 threads 0.000 0.000 0.000 0.000
loopback 196 threads 0.000 0.000 0.000 0.000
loopback 224 threads 0.000 0.000 0.000 0.000
According to the test above, if the system becomes busy, the
SIS Search Efficiency(se_eff%) drops significantly. Although some
benchmarks would finally find an idle CPU(success_rate% = 100%), it is
doubtful whether it is worth it to search the whole LLC domain.
[Proposal]
It would be ideal to have a crystal ball to answer this question:
How many CPUs must a wakeup path walk down, before it can find an idle
CPU? Many potential metrics could be used to predict the number.
One candidate is the sum of util_avg in this LLC domain. The benefit
of choosing util_avg is that it is a metric of accumulated historic
activity, which seems to be smoother than instantaneous metrics
(such as rq->nr_running). Besides, choosing the sum of util_avg
would help predict the load of the LLC domain more precisely, because
SIS_PROP uses one CPU's idle time to estimate the total LLC domain idle
time.
In summary, the lower the util_avg is, the more select_idle_cpu()
should scan for idle CPU, and vice versa. When the sum of util_avg
in this LLC domain hits 85% or above, the scan stops. The reason to
choose 85% as the threshold is that this is the imbalance_pct(117)
when a LLC sched group is overloaded.
Introduce the quadratic function:
y = SCHED_CAPACITY_SCALE - p * x^2
and y'= y / SCHED_CAPACITY_SCALE
x is the ratio of sum_util compared to the CPU capacity:
x = sum_util / (llc_weight * SCHED_CAPACITY_SCALE)
y' is the ratio of CPUs to be scanned in the LLC domain,
and the number of CPUs to scan is calculated by:
nr_scan = llc_weight * y'
Choosing quadratic function is because:
[1] Compared to the linear function, it scans more aggressively when the
sum_util is low.
[2] Compared to the exponential function, it is easier to calculate.
[3] It seems that there is no accurate mapping between the sum of util_avg
and the number of CPUs to be scanned. Use heuristic scan for now.
For a platform with 112 CPUs per LLC, the number of CPUs to scan is:
sum_util% 0 5 15 25 35 45 55 65 75 85 86 ...
scan_nr 112 111 108 102 93 81 65 47 25 1 0 ...
For a platform with 16 CPUs per LLC, the number of CPUs to scan is:
sum_util% 0 5 15 25 35 45 55 65 75 85 86 ...
scan_nr 16 15 15 14 13 11 9 6 3 0 0 ...
Furthermore, to minimize the overhead of calculating the metrics in
select_idle_cpu(), borrow the statistics from periodic load balance.
As mentioned by Abel, on a platform with 112 CPUs per LLC, the
sum_util calculated by periodic load balance after 112 ms would
decay to about 0.5 * 0.5 * 0.5 * 0.7 = 8.75%, thus bringing a delay
in reflecting the latest utilization. But it is a trade-off.
Checking the util_avg in newidle load balance would be more frequent,
but it brings overhead - multiple CPUs write/read the per-LLC shared
variable and introduces cache contention. Tim also mentioned that,
it is allowed to be non-optimal in terms of scheduling for the
short-term variations, but if there is a long-term trend in the load
behavior, the scheduler can adjust for that.
When SIS_UTIL is enabled, the select_idle_cpu() uses the nr_scan
calculated by SIS_UTIL instead of the one from SIS_PROP. As Peter and
Mel suggested, SIS_UTIL should be enabled by default.
This patch is based on the util_avg, which is very sensitive to the
CPU frequency invariance. There is an issue that, when the max frequency
has been clamp, the util_avg would decay insanely fast when
the CPU is idle. Commit
|
||
|
Zhang Qiao
|
fb95a5a04d |
sched/fair: Remove redundant word " *"
" *" is redundant. so remove it. Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220617181151.29980-2-zhangqiao22@huawei.com |
||
|
Josh Don
|
792b9f65a5 |
sched: Allow newidle balancing to bail out of load_balance
While doing newidle load balancing, it is possible for new tasks to arrive, such as with pending wakeups. newidle_balance() already accounts for this by exiting the sched_domain load_balance() iteration if it detects these cases. This is very important for minimizing wakeup latency. However, if we are already in load_balance(), we may stay there for a while before returning back to newidle_balance(). This is most exacerbated if we enter a 'goto redo' loop in the LBF_ALL_PINNED case. A very straightforward workaround to this is to adjust should_we_balance() to bail out if we're doing a CPU_NEWLY_IDLE balance and new tasks are detected. This was tested with the following reproduction: - two threads that take turns sleeping and waking each other up are affined to two cores - a large number of threads with 100% utilization are pinned to all other cores Without this patch, wakeup latency was ~120us for the pair of threads, almost entirely spent in load_balance(). With this patch, wakeup latency is ~6us. Signed-off-by: Josh Don <joshdon@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220609025515.2086253-1-joshdon@google.com |
||
|
Chengming Zhou
|
51bf903b64 |
sched/fair: Optimize and simplify rq leaf_cfs_rq_list
We notice the rq leaf_cfs_rq_list has two problems when do bugfix backports and some test profiling. 1. cfs_rqs under throttled subtree could be added to the list, and make their fully decayed ancestors on the list, even though not needed. 2. #1 also make the leaf_cfs_rq_list management complex and error prone, this is the list of related bugfix so far: commit |
||
|
K Prateek Nayak
|
f5b2eeb499 |
sched/fair: Consider CPU affinity when allowing NUMA imbalance in find_idlest_group()
In the case of systems containing multiple LLCs per socket, like AMD Zen systems, users want to spread bandwidth hungry applications across multiple LLCs. Stream is one such representative workload where the best performance is obtained by limiting one stream thread per LLC. To ensure this, users are known to pin the tasks to a specify a subset of the CPUs consisting of one CPU per LLC while running such bandwidth hungry tasks. Suppose we kickstart a multi-threaded task like stream with 8 threads using taskset or numactl to run on a subset of CPUs on a 2 socket Zen3 server where each socket contains 128 CPUs (0-63,128-191 in one socket, 64-127,192-255 in another socket) Eg: numactl -C 0,16,32,48,64,80,96,112 ./stream8 Here each CPU in the list is from a different LLC and 4 of those LLCs are on one socket, while the other 4 are on another socket. Ideally we would prefer that each stream thread runs on a different CPU from the allowed list of CPUs. However, the current heuristics in find_idlest_group() do not allow this during the initial placement. Suppose the first socket (0-63,128-191) is our local group from which we are kickstarting the stream tasks. The first four stream threads will be placed in this socket. When it comes to placing the 5th thread, all the allowed CPUs are from the local group (0,16,32,48) would have been taken. However, the current scheduler code simply checks if the number of tasks in the local group is fewer than the allowed numa-imbalance threshold. This threshold was previously 25% of the NUMA domain span (in this case threshold = 32) but after the v6 of Mel's patchset "Adjust NUMA imbalance for multiple LLCs", got merged in sched-tip, Commit: |
||
|
Mel Gorman
|
cb29a5c19d |
sched/numa: Apply imbalance limitations consistently
The imbalance limitations are applied inconsistently at fork time and at runtime. At fork, a new task can remain local until there are too many running tasks even if the degree of imbalance is larger than NUMA_IMBALANCE_MIN which is different to runtime. Secondly, the imbalance figure used during load balancing is different to the one used at NUMA placement. Load balancing uses the number of tasks that must move to restore imbalance where as NUMA balancing uses the total imbalance. In combination, it is possible for a parallel workload that uses a small number of CPUs without applying scheduler policies to have very variable run-to-run performance. [lkp@intel.com: Fix build breakage for arc-allyesconfig] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-4-mgorman@techsingularity.net |
||
|
Mel Gorman
|
13ede33150 |
sched/numa: Do not swap tasks between nodes when spare capacity is available
If a destination node has spare capacity but there is an imbalance then two tasks are selected for swapping. If the tasks have no numa group or are within the same NUMA group, it's simply shuffling tasks around without having any impact on the compute imbalance. Instead, it's just punishing one task to help another. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-3-mgorman@techsingularity.net |
||
|
Mel Gorman
|
70ce3ea9aa |
sched/numa: Initialise numa_migrate_retry
On clone, numa_migrate_retry is inherited from the parent which means that the first NUMA placement of a task is non-deterministic. This affects when load balancing recognises numa tasks and whether to migrate "regular", "remote" or "all" tasks between NUMA scheduler domains. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-2-mgorman@techsingularity.net |
||
|
Linus Torvalds
|
1ec6574a3c |
This set of changes updates init and user mode helper tasks to be
ordinary user mode tasks. In commit |
||
|
Linus Torvalds
|
44d35720c9 |
sysctl changes for v5.19-rc1
For two kernel releases now kernel/sysctl.c has been being cleaned up slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and all this caused merge conflicts with one susbystem or another. This tree was put together to help try to avoid conflicts with these cleanups going on different trees at time. So nothing exciting on this pull request, just cleanups. I actually had this sysctl-next tree up since v5.18 but I missed sending a pull request for it on time during the last merge window. And so these changes have been being soaking up on sysctl-next and so linux-next for a while. The last change was merged May 4th. Most of the compile issues were reported by 0day and fixed. To help avoid a conflict with bpf folks at Daniel Borkmann's request I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which moves the BPF sysctls from kernel/sysctl.c to BPF core. Possible merge conflicts and known resolutions as per linux-next: bfp: https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au rcu: https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au powerpc: https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOq8ASHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinDAkQAJVo5YVM9f74UwYp4PQhTpjxJBCjRoZD z1u9bp5rMj2ujTC8Fr7VmzKaHrb8+r1C1WvCvZtIzemYNB4lZUrHpVDYfXuXiPRB ihPmEjhlPO5PFBx6cVCpI3cu9bEhG00rLc1QXnABx/pXwNPcOTJAGZJVamZvqubk chjgZrb7N+adHPfvS55v1+zpwdeKfpp5U3zuu5qlT/nn0GS0HCVzOj5fj4oC4wtJ IqfUubo+FX50Ga58yQABWNrjaPD9Crykz5ohVazy3ElQl0hJ4VsK65ct3blqc2vz 1Bb8kPpWuv6aZ5nr1lCVE8qvF4ZIL33ySvpg5BSdWLQEDrBbSpzvJe9Yn7wgR+eq y7fhpO24+zRM82EoDMEvyxX9u1n1RsvoXRtf3ds9BGf63MUxk8a1cgjlU6vuyO2U JhDmfM1xzdKvPoY4COOnHzcAiIqzItTqKd09N5y0cahmYstROU8lvp9huhTAHqk1 SjQMbLIZG7OnX8ZeQcR1EB8sq/IOPZT48ejj0iJmQ8FyMaep71MOQLYyLPAq4lgh JHXm8P6QdB57jfJbqAeNSyZoK0qdxOUR/83Zcah7Jjns6vkju1DNatEsaEEI2y2M 4n7/rkHeZ3TyFHBUX4e9FomKvGLsAalDBRiqsuxLSOPMU8rGrNLAslOAtKwvp90X 4ht3M2VP098l =btwh -----END PGP SIGNATURE----- Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "For two kernel releases now kernel/sysctl.c has been being cleaned up slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and all this caused merge conflicts with one susbystem or another. This tree was put together to help try to avoid conflicts with these cleanups going on different trees at time. So nothing exciting on this pull request, just cleanups. Thanks a lot to the Uniontech and Huawei folks for doing some of this nasty work" * tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits) sched: Fix build warning without CONFIG_SYSCTL reboot: Fix build warning without CONFIG_SYSCTL kernel/kexec_core: move kexec_core sysctls into its own file sysctl: minor cleanup in new_dir() ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n fs/proc: Introduce list_for_each_table_entry for proc sysctl mm: fix unused variable kernel warning when SYSCTL=n latencytop: move sysctl to its own file ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y ftrace: Fix build warning ftrace: move sysctl_ftrace_enabled to ftrace.c kernel/do_mount_initrd: move real_root_dev sysctls to its own file kernel/delayacct: move delayacct sysctls to its own file kernel/acct: move acct sysctls to its own file kernel/panic: move panic sysctls to its own file kernel/lockdep: move lockdep sysctls to its own file mm: move page-writeback sysctls to their own file mm: move oom_kill sysctls to their own file kernel/reboot: move reboot sysctls to its own file sched: Move energy_aware sysctls to topology.c ... |
||
|
Eric W. Biederman
|
b3f9916d81 |
sched: Update task_tick_numa to ignore tasks without an mm
Qian Cai <quic_qiancai@quicinc.com> wrote: > Reverting the last 3 commits of the series fixed a boot crash. > > |
||
|
Ingo Molnar
|
d70522fc54 |
Linux 5.18-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q 4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3 odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB J3+wdek= =39Ca -----END PGP SIGNATURE----- Merge tag 'v5.18-rc5' into sched/core to pull in fixes & to resolve a conflict - sched/core is on a pretty old -rc1 base - refresh it to include recent fixes. - this also allows up to resolve a (trivial) .mailmap conflict Conflicts: .mailmap Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Thomas Gleixner
|
d664e39912 |
sched: Fix missing prototype warnings
A W=1 build emits more than a dozen missing prototype warnings related to scheduler and scheduler specific includes. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220413133024.249118058@linutronix.de |
||
|
Dietmar Eggemann
|
97956dd278 |
sched/fair: Remove cfs_rq_tg_path()
cfs_rq_tg_path() is used by a tracepoint-to traceevent (tp-2-te) converter to format the path of a taskgroup or autogroup respectively. It doesn't have any in-kernel users after the removal of the sched_trace_cfs_rq_path() helper function. cfs_rq_tg_path() can be coded in a tp-2-te converter. Remove it from kernel/sched/fair.c. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220428144338.479094-3-qais.yousef@arm.com |
||
|
Dietmar Eggemann
|
50e7b416d2 |
sched/fair: Remove sched_trace_*() helper functions
We no longer need them as we can use DWARF debug info or BTF + pahole to re-generate the required structs to compile against them for a given kernel. This moves the burden of maintaining these helper functions to the module. https://github.com/qais-yousef/sched_tp Note that pahole v1.15 is required at least for using DWARF. And for BTF v1.23 which is not yet released will be required. There's alignment problem that will lead to crashes in earlier versions when used with BTF. We should have enough infrastructure to make these helper functions now obsolete, so remove them. [Rewrote commit message to reflect the new alternative] Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220428144338.479094-2-qais.yousef@arm.com |
||
|
Dietmar Eggemann
|
4e3c7d338a |
sched/fair: Refactor cpu_util_without()
Except the 'task has no contribution or is new' condition at the
beginning of cpu_util_without(), which it shares with the load and
runnable counterpart functions, a cpu_util_next(..., dst_cpu = -1)
call can replace the rest of it.
The UTIL_EST specific check that task util_est has to be subtracted
from the CPU one in case of an enqueued (or current (to cater for the
wakeup - lb race)) task has to be moved to cpu_util_next().
This was initially introduced by commit
|
||
|
Tao Zhou
|
a658353167 |
sched/fair: Revise comment about lb decision matrix
If busiest group type is group_misfit_task, the local
group type must be group_has_spare according to below
code in update_sd_pick_busiest():
if (sgs->group_type == group_misfit_task &&
(!capacity_greater(capacity_of(env->dst_cpu), sg->sgc->max_capacity) ||
sds->local_stat.group_type != group_has_spare))
return false;
group type imbalanced and overloaded and fully_busy are filtered in here.
misfit and asym are filtered before in update_sg_lb_stats().
So, change the decision matrix to:
busiest \ local has_spare fully_busy misfit asym imbalanced overloaded
has_spare nr_idle balanced N/A N/A balanced balanced
fully_busy nr_idle nr_idle N/A N/A balanced balanced
misfit_task force N/A N/A N/A *N/A* *N/A*
asym_packing force force N/A N/A force force
imbalanced force force N/A N/A force force
overloaded force force N/A N/A force avg_load
Fixes:
|
||
|
Chengming Zhou
|
0a00a35464 |
sched/fair: Delete useless condition in tg_unthrottle_up()
We have tested cfs_rq->load.weight in cfs_rq_is_decayed(), the first condition "!cfs_rq_is_decayed(cfs_rq)" is enough to cover the second condition "cfs_rq->nr_running". Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20220408115309.81603-2-zhouchengming@bytedance.com |
||
|
Chengming Zhou
|
64eaf50731 |
sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
Since commit |
||
|
zgpeng
|
0635490078 |
sched/fair: Move calculate of avg_load to a better location
In calculate_imbalance function, when the value of local->avg_load is greater than or equal to busiest->avg_load, the calculated sds->avg_load is not used. So this calculation can be placed in a more appropriate position. Signed-off-by: zgpeng <zgpeng@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Samuel Liao <samuelliao@tencent.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/1649239025-10010-1-git-send-email-zgpeng@tencent.com |
||
|
kuyo chang
|
40f5aa4c5e |
sched/pelt: Fix attach_entity_load_avg() corner case
The warning in cfs_rq_is_decayed() triggered:
SCHED_WARN_ON(cfs_rq->avg.load_avg ||
cfs_rq->avg.util_avg ||
cfs_rq->avg.runnable_avg)
There exists a corner case in attach_entity_load_avg() which will
cause load_sum to be zero while load_avg will not be.
Consider se_weight is 88761 as per the sched_prio_to_weight[] table.
Further assume the get_pelt_divider() is 47742, this gives:
se->avg.load_avg is 1.
However, calculating load_sum:
se->avg.load_sum = div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se));
se->avg.load_sum = 1*47742/88761 = 0.
Then enqueue_load_avg() adds this to the cfs_rq totals:
cfs_rq->avg.load_avg += se->avg.load_avg;
cfs_rq->avg.load_sum += se_weight(se) * se->avg.load_sum;
Resulting in load_avg being 1 with load_sum is 0, which will trigger
the WARN.
Fixes:
|
||
|
Zhen Ni
|
d4ae80ffa6 |
sched: Move cfs_bandwidth_slice sysctls to fair.c
move cfs_bandwidth_slice sysctls to fair.c and use the new register_sysctl_init() to register the sysctl interface. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Zhen Ni
|
a60707d74b |
sched: Move child_runs_first sysctls to fair.c
move child_runs_first sysctls to fair.c and use the new register_sysctl_init() to register the sysctl interface. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
1930a6e739 |
ptrace: Cleanups for v5.18
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
||
|
Huang, Ying
|
ab31c7fd2d |
sched/numa: Fix boot crash on arm64 systems
Qian Cai reported a boot crash on arm64 systems, caused by: |
||
|
Ingo Molnar
|
c4ad6fcb67 |
sched/headers: Reorganize, clean up and optimize kernel/sched/fair.c dependencies
Use all generic headers from kernel/sched/sched.h that are required for it to build. Sort the sections alphabetically. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org> |
||
|
Ingo Molnar
|
b9e9c6ca6e |
sched/headers: Standardize kernel/sched/sched.h header dependencies
kernel/sched/sched.h is a weird mix of ad-hoc headers included in the middle of the header. Two of them rely on being included in the middle of kernel/sched/sched.h, due to definitions they require: - "stat.h" needs the rq definitions. - "autogroup.h" needs the task_group definition. Move the inclusion of these two files out of kernel/sched/sched.h, and include them in all files that require them. Move of the rest of the header dependencies to the top of the kernel/sched/sched.h file. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org> |
||
|
Ingo Molnar
|
6255b48aeb |
Linux 5.17-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmISrYgeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg20IAKDZr7rfSHBopjQV Cocw744tom0XuxpvSZpp2GGOOXF+tkswcNNaRIrbGOl1mkyxA7eBZCTMpDeDS9aQ wB0D0Gxx8QBAJp4KgB1W7TB+hIGes/rs8Ve+6iO4ulLLdCVWX/q2boI0aZ7QX9O9 qNi8OsoZQtk6falRvciZFHwV5Av1p2Sy1AW57udQ7DvJ4H98AfKf1u8/z208WWW8 1ixC+qJxQcUcM9vI+7P9Tt7NbFSKv8SvAmqjFY7P+DxQAsVw6KXoqVXykDzeOv0t fUNOE/t0oFZafwtn8h7KBQnwS9lH03+3KkslVZs+iMFyUj/Bar+NVVyKoDhWXtVg /PuMhEg= =eU1o -----END PGP SIGNATURE----- Merge tag 'v5.17-rc5' into sched/core, to resolve conflicts New conflicts in sched/core due to the following upstream fixes: |
||
|
Frederic Weisbecker
|
04d4e665a6 |
sched/isolation: Use single feature type while referring to housekeeping cpumask
Refer to housekeeping APIs using single feature types instead of flags. This prevents from passing multiple isolation features at once to housekeeping interfaces, which soon won't be possible anymore as each isolation features will have their own cpumask. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org |
||
|
Huang Ying
|
5c7b1aaf13 |
sched/numa: Avoid migrating task to CPU-less node
In a typical memory tiering system, there's no CPU in slow (PMEM) NUMA nodes. But if the number of the hint page faults on a PMEM node is the max for a task, The current NUMA balancing policy may try to place the task on the PMEM node instead of DRAM node. This is unreasonable, because there's no CPU in PMEM NUMA nodes. To fix this, CPU-less nodes are ignored when searching the migration target node for a task in this patch. To test the patch, we run a workload that accesses more memory in PMEM node than memory in DRAM node. Without the patch, the PMEM node will be chosen as preferred node in task_numa_placement(). While the DRAM node will be chosen instead with the patch. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220214121553.582248-2-ying.huang@intel.com |
||
|
Huang Ying
|
0fb3978b0a |
sched/numa: Fix NUMA topology for systems with CPU-less nodes
The NUMA topology parameters (sched_numa_topology_type, sched_domains_numa_levels, and sched_max_numa_distance, etc.) identified by scheduler may be wrong for systems with CPU-less nodes. For example, the ACPI SLIT of a system with CPU-less persistent memory (Intel Optane DCPMM) nodes is as follows, [000h 0000 4] Signature : "SLIT" [System Locality Information Table] [004h 0004 4] Table Length : 0000042C [008h 0008 1] Revision : 01 [009h 0009 1] Checksum : 59 [00Ah 0010 6] Oem ID : "XXXX" [010h 0016 8] Oem Table ID : "XXXXXXX" [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "INTL" [020h 0032 4] Asl Compiler Revision : 20091013 [024h 0036 8] Localities : 0000000000000004 [02Ch 0044 4] Locality 0 : 0A 15 11 1C [030h 0048 4] Locality 1 : 15 0A 1C 11 [034h 0052 4] Locality 2 : 11 1C 0A 1C [038h 0056 4] Locality 3 : 1C 11 1C 0A While the `numactl -H` output is as follows, available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 0 size: 64136 MB node 0 free: 5981 MB node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 node 1 size: 64466 MB node 1 free: 10415 MB node 2 cpus: node 2 size: 253952 MB node 2 free: 253920 MB node 3 cpus: node 3 size: 253952 MB node 3 free: 253951 MB node distances: node 0 1 2 3 0: 10 21 17 28 1: 21 10 28 17 2: 17 28 10 28 3: 28 17 28 10 In this system, there are only 2 sockets. In each memory controller, both DRAM and PMEM DIMMs are installed. Although the physical NUMA topology is simple, the logical NUMA topology becomes a little complex. Because both the distance(0, 1) and distance (1, 3) are less than the distance (0, 3), it appears that node 1 sits between node 0 and node 3. And the whole system appears to be a glueless mesh NUMA topology type. But it's definitely not, there is even no CPU in node 3. This isn't a practical problem now yet. Because the PMEM nodes (node 2 and node 3 in example system) are offlined by default during system boot. So init_numa_topology_type() called during system boot will ignore them and set sched_numa_topology_type to NUMA_DIRECT. And init_numa_topology_type() is only called at runtime when a CPU of a never-onlined-before node gets plugged in. And there's no CPU in the PMEM nodes. But it appears better to fix this to make the code more robust. To test the potential problem. We have used a debug patch to call init_numa_topology_type() when the PMEM node is onlined (in __set_migration_target_nodes()). With that, the NUMA parameters identified by scheduler is as follows, sched_numa_topology_type: NUMA_GLUELESS_MESH sched_domains_numa_levels: 4 sched_max_numa_distance: 28 To fix the issue, the CPU-less nodes are ignored when the NUMA topology parameters are identified. Because a node may become CPU-less or not at run time because of CPU hotplug, the NUMA topology parameters need to be re-initialized at runtime for CPU hotplug too. With the patch, the NUMA parameters identified for the example system above is as follows, sched_numa_topology_type: NUMA_DIRECT sched_domains_numa_levels: 2 sched_max_numa_distance: 21 Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220214121553.582248-1-ying.huang@intel.com |
||
|
Mel Gorman
|
e496132ebe |
sched/fair: Adjust the allowed NUMA imbalance when SD_NUMA spans multiple LLCs
Commit
|