This fixes 1 PW.INCLUDE_RECURSION reported by Coverity.
"./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h"
includes itself: dc_types.h -> dal_types.h -> dc_types.h
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns
an array index and they return -1 when not found; however, -1 is not a
valid index number.
[HOW]
When this happens, call ASSERT(), and return a positive number (which is
fewer than callers' array size) instead.
This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
resource_stream_to_stream_idx returns an array index and it return -1
when not found; however, -1 is not a valid array index number.
[HOW]
When this happens, call ASSERT(), and return a zero instead.
This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
&mode_lib->mp.Watermark and &locals->Watermark are
the same address. memcpy may lead to unexpected behavior.
[HOW]
memmove should be used.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are new control registers introduced in gfx10 used to configure
hardware watchpoints triggered by SMEM instructions:
SQ_WATCH{0,1,2,3}_{CNTL_ADDR_HI,ADDR_L}.
Those registers work in a similar way as the TCP_WATCH* registers
currently used for gfx9 and above.
This patch adds support to program the SQ_WATCH registers for gfx10.
The SQ_WATCH?_CNTL.MASK field has one bit more than
TCP_WATCH?_CNTL.MASK, so SQ watchpoints can have a finer granularity
than TCP_WATCH watchpoints. In this patch, we keep the capabilities
advertised to the debugger unchanged
(HSA_DBG_WATCH_ADDR_MASK_*_BIT_GFX10) as this reflects what both TCP and
SQ watchpoints can do and both watchpoints are configured together.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
msg_id is used as an array index and it cannot be a negative value, and
therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1).
[HOW]
Check whether msg_id is valid before reading and setting.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating
about potential truncation of output when using the snprintf function.
The issue was due to the size of the buffer 'ucode_prefix' being too
small to accommodate the maximum possible length of the string being
written into it.
The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin",
where %s is replaced by the value of 'chip_name'. The length of this
string without the %s is 16 characters. The warning message indicated
that 'chip_name' could be up to 29 characters long, resulting in a total
of 45 characters, which exceeds the buffer size of 30 characters.
To resolve this issue, the size of the 'ucode_prefix' buffer has been
reduced from 30 to 15. This ensures that the maximum possible length of
the string being written into the buffer will not exceed its size, thus
preventing potential buffer overflow and truncation issues.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~
......
439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~
......
443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 8630112969 ("drm/amdgpu: split gc v9_4_3 functionality from gc v9_0")
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Check return pointer of kzalloc before using it.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages
will be run many times so that double free err_addr in some special case.
So set the err_addr to NULL to avoid the warnings.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parameter "last_jump_jiffies" should be initialized
before being used in the function atom_op_jump.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if ring is not a mes queue before freeing the wb entry,
because we only allocate a wb entry when it's not a mes queue.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After amdgpu_i2c_get_byte fail, amdgpu_i2c_put_byte shouldn't be
conducted to put wrong value.
So return and check the i2c transfer result.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should
be stop to avoid out-of-bounds read, so directly return -EINVAL.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the interrupt timestamp for some legacy SOCs
to fix the coverity issue "Uninitialized scalar variable"
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new interface to reserve bad page.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
retired_page is page frame and should be expanded
to the full address when querying status.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Queue buffer, though it is in system memory, has to be created using the
correct amdgpu device. Enforce this as the BO needs to mapped to the
GART for MES Hardware scheduler to access it.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Headless dp 2.0 will take longer to update.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add some missing HDMI control registers to DCN3x.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retire bad pages for umc v12_0.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add delay work to retire bad pages.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. umc v12_0 logs ecc errors.
2. Reserve newly detected ecc error pages.
3. Add tag for bad pages, so that they can
be retired later.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add TMDS balancer control to the list of available encoder registers for
DCN 30.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes an unnecessary NULL check in the
`dcn20_set_input_transfer_func` function in the `dcn20_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
The plane_state->in_transfer_func itself cannot be NULL because it's a
structure, not a pointer. When we do tf =
&plane_state->in_transfer_func;, we're getting the address of that
structure, which will always be valid as long as plane_state itself is
not NULL.
we've already checked if plane_state is NULL with the line if (dpp_base
== NULL || plane_state == NULL) return false;. So, if the code execution
gets to the point where tf = &plane_state->in_transfer_func; is called,
plane_state is guaranteed to be not NULL, and therefore tf will also not
be NULL.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c
1094 bool dcn20_set_input_transfer_func(struct dc *dc,
1095 struct pipe_ctx *pipe_ctx,
1096 const struct dc_plane_state *plane_state)
1097 {
1098 struct dce_hwseq *hws = dc->hwseq;
1099 struct dpp *dpp_base = pipe_ctx->plane_res.dpp;
1100 const struct dc_transfer_func *tf = NULL;
^^^^^^^^^ This assignment is not necessary now.
1101 bool result = true;
1102 bool use_degamma_ram = false;
1103
1104 if (dpp_base == NULL || plane_state == NULL)
1105 return false;
1106
1107 hws->funcs.set_shaper_3dlut(pipe_ctx, plane_state);
1108 hws->funcs.set_blend_lut(pipe_ctx, plane_state);
1109
1110 tf = &plane_state->in_transfer_func;
^^^^^
Before there was an if statement but now tf is assigned unconditionally
1111
--> 1112 if (tf == NULL) {
^^^^^^^^^^^^^^^^^
so these conditions are impossible.
1113 dpp_base->funcs->dpp_set_degamma(dpp_base,
1114 IPP_DEGAMMA_MODE_BYPASS);
1115 return true;
1116 }
1117
1118 if (tf->type == TF_TYPE_HWPWL || tf->type == TF_TYPE_DISTRIBUTED_POINTS)
1119 use_degamma_ram = true;
1120
1121 if (use_degamma_ram == true) {
1122 if (tf->type == TF_TYPE_HWPWL)
1123 dpp_base->funcs->dpp_program_degamma_pwl(dpp_base,
Fixes the below Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1112 dcn20_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't use a shared fence location because each transaction
should be considered independently.
Reviewed-by: Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN3.0 supports some specific DWB debug registers that are not exposed
yet. This commit just adds the missing registers.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to [1]:
```
DTN only logs 'pipe_count' instances of MPCC. However in some cases
there are different number of MPCC than DPP (pipe_count).
```
As DTN log still relies on pipe_count to print mpcc state, switch to
mpcc_count in all occurrences.
[1] https://lore.kernel.org/amd-gfx/20240328195047.2843715-39-Roman.Li@amd.com/
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As we use wb slots more dynamically, we need to lock
access to avoid racing on allocation or free.
Reviewed-by: Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the header file dc/dcn301/dcn301_dccg.h, the function dccg301_create
is declared twice, so remove duplication.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Subtract the VRAM pinned memory when checking for available memory
in amdgpu_amdkfd_reserve_mem_limit function since that memory is not
available for use.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg ip version v2.1 and higher supports 16kx16k resolution decode
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When slice_height is 0, the division by slice_height in the calculation
of the number of slices will cause a division by zero driver crash. This
leaves the kernel in a state that requires a reboot. This patch adds a
check to avoid the division by zero.
The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on
a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor
connected via Thunderbolt. The amdgpu driver crashed with this exception
when I rebooted the system with the monitor connected.
kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2))
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu
After applying this patch, the driver no longer crashes when the monitor
is connected and the system is rebooted. I believe this is the same
issue reported for 3113.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jose Fernandez <josef@netflix.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3113
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add some missing debug registers for DPCS and RDPC debug.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ip dump for each ip of the asic in the
devcoredump for all the ips where a callback
is registered for register dump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Invoke the dump_ip_state function for each ip before
the asic resets and save the register values for
debugging via devcoredump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to print ip information to be
used to print registers in devcoredump
buffer.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding gfx10 gc registers to be used for register
dump via devcoredump during a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to reserve bad page.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return 0 to avoid returning an uninitialized variable r
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete fence fallback timer to fix the ramdom
use-after-free issue.
v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d76c0a23b5.
This change must be reverted since it caused soft hangs when changing
the refresh rate to 122 & 144Hz when using a 7000 series GPU.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses buffer overflow in the smu_v14_0_init_microcode
function. The issue was about the snprintf function writing more bytes
into the fw_name buffer than it can hold.
The line of code is:
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
Here, snprintf is used to write a formatted string into fw_name. The
format is "amdgpu/%s.bin", where %s is a placeholder for the string
ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum
number of bytes it can write into fw_name, including the
null-terminating character. In the original code, fw_name is an array of
30 characters.
The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds
the 30 bytes allocated for fw_name. This is because %s could be replaced
by ucode_prefix, which can be up to 29 characters long. Adding the 12
characters from "amdgpu/" and ".bin", the total length could be 41
characters.
To address this, the size of ucode_prefix has been reduced to 15
characters. This ensures that the maximum length of the string written into
fw_name does not exceed its capacity.
smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fe6cd91524 ("drm/amd/swsmu: add smu14 ip support")
Cc: Li Ma <li.ma@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace tmz flag into buffer flag to make it easier to understand
and extend
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To adapt to different gc versions in gfx_v9_4_3.c file.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=xhbG
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.10
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425153859.3579-1-chunkuang.hu@kernel.org
This failed to build here after the header rework.
Fixes: 33d5ae6cac ("drm/print: drop include debugfs.h and include where needed")
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fails to build with missing seq declerations.
Fixes: 9e2b84fb6c ("drm/print: drop include seq_file.h")
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fails to build with missing seq declerations.
Fixes: 9e2b84fb6c ("drm/print: drop include seq_file.h")
Signed-off-by: Dave Airlie <airlied@redhat.com>
/home/airlied/devel/kernel/dim/src/drivers/gpu/drm/i915/i915_debugfs_params.c:213:9: error: call to undeclared function 'debugfs_create_file_unsafe'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
return debugfs_create_file_unsafe(name, mode, parent, value,
^
/home/airlied/devel/kernel/dim/src/drivers/gpu/drm/i915/i915_debugfs_params.c:213:9: error: incompatible integer to pointer conversion returning 'int' from a function with result type 'struct dentry *' [-Wint-conversion]
return debugfs_create_file_unsafe(name, mode, parent, value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/airlied/devel/kernel/dim/src/drivers/gpu/drm/i915/i915_debugfs_params.c:222:9: error: call to undeclared function 'debugfs_create_file_unsafe'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
return debugfs_create_file_unsafe(name, mode, parent, value,
^
/home/airlied/devel/kernel/dim/src/drivers/gpu/drm/i915/i915_debugfs_params.c:222:9: error: incompatible integer to pointer conversion returning 'int' from a function with result type 'struct dentry *' [-Wint-conversion]
return debugfs_create_file_unsafe(name, mode, parent, value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Building with clang gave me a bunch of similiar fails to the above.
Fixes: 33d5ae6cac ("drm/print: drop include debugfs.h and include where needed")
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-next for v6.10-rc1:
UAPI Changes:
Cross-subsystem Changes:
- Devicetree updates for rockchip (#sound-dai-cells)
- Add dt bindings for new panels.
- Change bridge/tc358775 dt bindings.
Core Changes:
- Fix SIZE_HINTS cursor property doc.
- Parse topology blocks for all DispID < 2.0.
- Implement support for tracking cleared free memory, use it in amdgpu.
- Drop seq_file.h from drm_print.h, and include debugfs.h explicitly
where needed (drivers).
Driver Changes:
- Small fixes to rockchip, panthor, v3d, bridge chaining, xlx.
- Add Khadas TS050 V2, EDO RM69380 OLED, CSOT MNB601LS1-1 panels,
- Add SAM9X7 SoC's LVDS controller.
- More driver conversions to struct drm_edid.
- Support tc358765 in tc358775 bridge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ab99848-8fb8-41a6-8967-c4ce6f3634fd@linux.intel.com
- Drop .owner from platform_driver declaration of each exynos drm module.
- Drop the cleanup code to device_node object in exynos_hdmi.c using
the scope-based resource management feature[1].
[1] https://lwn.net/Articles/934679/?ref=upstract.com
-----BEGIN PGP SIGNATURE-----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=k39J
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- Drop .owner from platform_driver declaration of each exynos drm module.
- Drop the cleanup code to device_node object in exynos_hdmi.c using
the scope-based resource management feature[1].
[1] https://lwn.net/Articles/934679/?ref=upstract.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425034325.33507-1-inki.dae@samsung.com
Legacy DU was broken by the referenced fixes commit because the placement
and the busy_placement no longer pointed to the same object. This was later
fixed indirectly by commit a78a8da51b
("drm/ttm: replace busy placement with flags v6") in v6.9.
Fixes: 39985eea5a ("drm/vmwgfx: Abstract placement selection")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425200700.24403-1-ian.forbes@broadcom.com
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-11-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1dccdba084.
In userspace a different approach was choosen - hwdb. As a result, there
is no need for these values.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
commit 4bce244272 ("drm/etnaviv: disable tx clock gating for GC7000
rev6203") accidentally applied the fix for i.MX8MN errata ERR050226 to
GC2000 instead of GC7000, failing to disable tx clock gating for GC7000
rev 0x6023 as intended.
Additional clean-up further propagated this issue, partially breaking
the clock gating fixes added for GC7000 rev 6202 in commit 432f51e7de
("drm/etnaviv: add clock gating workaround for GC7000 r6202").
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.
v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe
v2: Also fix ivpu and vmwgfx
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When enabling i.MX8MP DWC HDMI driver, it automatically selects
PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy.
This may cause some Kconfig warnings during various build tests.
Fix this by implying the phy instead of selecting the phy.
To prevent this from happening with the DRM_IMX8MP_HDMI_PVI, also
imply it instead of selecting it.
Fixes: 1f36d63467 ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404190103.lLm8LtuP-lkp@intel.com/
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422103352.8886-1-aford173@gmail.com
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to intel_fbdev_setup() after i915 has registered its
DRM device. Just like similar code in other drivers, i915 fbdev
emulation now acts like a regular DRM client. Do the same for xe.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_client_dev_unregister() releases all in-kernel clients
automatically. No further action is required within i915. If the fbdev
framebuffer has been fully set up, struct fb_ops.fb_destroy implements
the release. For partially initialized emulation, the fbdev client
reverts the initial setup. Do the same for xe and remove its call to
intel_fbdev_fini().
v8:
- setup client in intel_display_driver_register (Jouni)
- mention xe in commit message
v7:
- update xe driver
- reword commit message
v6:
- use 'i915' for i915 device (Jouni)
- remove unnecessary code for non-atomic mode setting (Jouni, Ville)
- fix function name in commit message (Jouni)
v3:
- as before, silently ignore devices without displays
v2:
- let drm_client_register() handle initial hotplug
- fix driver name in error message (Jani)
- fix non-fbdev build (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-7-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display.
The DRM core calls both, the old callbacks and the new client
helpers, from the same places. The new functions perform the same
operation as before, so there's no change in functionality.
Fox xe, remove xe_display_last_close(), which restored the fbdev
display. As with i915, the DRM core's drm_lastclose() performs
this operation automatically.
v8:
- mention xe in commit message
v7:
- update xe driver
v6:
- return errors from client callbacks (Jouni)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-6-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unregister all in-kernel clients before unloading the i915 driver. For
other drivers, drm_dev_unregister() does this automatically. As i915 and
xe do not use this helper, they have to perform the call by themselves.
Note that there are currently no in-kernel clients in i915 or xe. The
patch prepares the drivers for a related update of their fbdev support.
v8:
- unregister clients in intel_display_driver_unregister() (Jani)
- mention xe in commit message (Rodrigo, Jani)
v7:
- update xe driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-5-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Initialize i915's fbdev client by giving an instance of struct
drm_client_funcs to drm_client_init(). Also clean up with
drm_client_release().
Doing this in i915 prevents fbdev helpers from initializing and
releasing the client internally (see drm_fb_helper_init()). No
functional change yet; the client callbacks will be filled later.
v6:
- rename client to "intel-fbdev" (Jouni)
v2:
- call drm_fb_helper_unprepare() in error handling (Jani)
- fix typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-4-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move functions within intel_fbdev.c to simplify later updates. Minor
style fixes to make checkpatch happy, but no functional changes.
v5:
- style fixes (checkpatch)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-3-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Export drm_client_dev_unregister() for use by the i915 driver. The
driver does not use drm_dev_unregister(), so it has to clean up the
in-kernel DRM clients by itself.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-2-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pass the dev_priv parameter to the low-level helpers, and move the
implicit dev_priv usage one level higher.
sed -i "s/\(_MMIO_PIPE2(\|_MMIO_TRANS2(\|_MMIO_CURSOR2(\)/\1dev_priv, /" \
$(git ls-files drivers/gpu/drm/i915)
Name the parameter "display", as the generics allow it to be display
already.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a865664898586ff6cb8e74eab3d1f36eafc0557.1713890614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Most users of _MMIO_PIPE3() and _MMIO_PORT3() need to add the MMIO base
to the registers. Convert the macros to _MMIO_BASE_PIPE3() and
_MMIO_BASE_PORT3() to move the base addition until after the register
selection. If the register address depends on DISPLAY_MMIO_BASE(), this
removes the need to figure the base out for each register, and it only
needs to be added once.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b95f125f5021abc00b5fc661b2728f1b583c01e.1713890614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Utilize the __free() cleanup handler within the hdmi_get_phy_io function
to automatically release the device node when it is out of scope.
This eliminates the manual invocation of of_node_put(), reducing the
potential for memory leaks.
The modification requires initializing the device node at the beginning
of the function, ensuring that the automatic cleanup is safely executed.
Consequently, this removes the need for error cleanup paths that utilize
goto statements and the jump to out is no longer necessary.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Shivani Gupta <shivani07g@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently intel_gt_reset() kills the GuC and then resets requested
engines. This is problematic because there is a dedicated CSB FIFO
which only GuC can access and if that FIFO fills up, the hardware
will block on the next context switch until there is space that means
the system is effectively hung. If an engine is reset whilst actively
executing a context, a CSB entry will be sent to say that the context
has gone idle. Thus if reset happens on a very busy system then
killing GuC before killing the engines will lead to deadlock because
of filled up CSB FIFO.
To address this issue, the GuC should be killed only after resetting
the requested engines and before calling intel_gt_init_hw().
v2: Improve commit message(John)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-2-nirmoy.das@intel.com
__intel_gt_reset() is really for resetting engines though
the name might suggest something else. So add a helper function
to remove confusions with no functional changes.
v2: Move intel_gt_reset_all_engines() next to
intel_gt_reset_engine() to make diff simple(John)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-1-nirmoy.das@intel.com
By default CT code was passing just payload of the G2H event
message, while Relay code expects full G2H message including
HXG header which contains DATA0 field. Fix that.
Fixes: 26d4481ac2 ("drm/xe/guc: Start handling GuC Relay event messages")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419150351.358-1-michal.wajdeczko@intel.com
(cherry picked from commit 48c64d495f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the
action (free_gsc_pkt) in the event of a failure; therefore, there's no
necessity to call it within the return check.
-v2
Fix commit message. (Lucas)
Fixes: d8b1571312 ("drm/xe/huc: HuC authentication via GSC")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-4-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 22bf0bc04d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the action
(sysfs removal) in the event of a failure; therefore, there's no
necessity to call it within the return check.
Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the
caller to pass errors up the call chain. Should sysfs creation or
drmm_add_action_or_reset fail, error propagation will prompt a driver
load abort.
-v2
Edit commit message (Nikula/Lucas)
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Fixes: f3bc5bb4d5 ("drm/xe: Allow userspace to configure CCS mode")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a99641e387)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Program live video input format according to selected media bus format.
In the bridge mode of operation, DPSUB is connected to FPGA CRTC which
almost certainly supports a single media bus format as its output. Expect
this to be delivered via the new bridge atomic state. Program DPSUB
registers accordingly.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-6-c7f379b7168e@amd.com
Avoid usage of global zynqmp_dpsub.dma_enabled flag in DPSUB layer
context. This flag signals whether the driver runs in DRM CRTC or DRM
bridge mode, assuming that all display layers share the same live or
non-live mode of operation. Using per-layer mode instead of global flag
will simplify future support of the hybrid scenario.
Remove redundant checks in DMA request/release contexts as
zynqmp_disp_layer.info is well-defined for all layer types, including the
correct number of DMA channels required for each particular layer.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-5-c7f379b7168e@amd.com
DPSUB in bridge mode supports multiple input media bus formats.
Announce the list of supported input media bus formats via
drm_bridge.atomic_get_input_bus_fmts callback. Introduce a set of live
input formats supported by DPSUB. Add safeguards to format list functions
to prevent their misuse in the different layer modes contexts.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-4-c7f379b7168e@amd.com
Add a helper function capturing the first connected live display layer
discovery logic.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-3-c7f379b7168e@amd.com
Update live format defines to match DPSUB AV_BUF_LIVE_VID_CONFIG register
layout. These defines were never referenced before, so no other changes
required.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-2-c7f379b7168e@amd.com
Set layer mode of operation (live or dma-based) during layer creation.
Each DPSUB layer mode of operation is defined by corresponding DT node port
connection, so it is possible to assign it during layer object creation.
Previously it was set in layer enable functions, although it is too late
as setting layer format depends on layer mode, and should be done before
given layer enabled.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-1-c7f379b7168e@amd.com
Delete fence fallback timer to fix the ramdom
use-after-free issue.
v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Make SVM BOs more likely to get evicted than other BOs. These BOs
opportunistically use available VRAM, but can fall back relatively
seamlessly to system memory. It also avoids SVM migrations evicting
other, more important BOs as they will evict other SVM allocations
first.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vpe dpm settings should be done before firmware is loaded.
Otherwise, the frequency cannot be successfully raised.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDP Flush request bit can be kept unique per AID, and doesn't need to be
unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When page table BOs were evicted but not validated before
updating page tables, VM is still in evicting state,
amdgpu_vm_update_range returns -EBUSY and
restore_process_worker runs into a dead loop.
v2: Split the BO validation and page table update into two
separate loops in amdgpu_amdkfd_restore_process_bos. (Felix)
1.Validate BOs
2.Validate VM (and DMABuf attachments)
3.Update page tables for the BOs validated above
Fixes: 50661eb1a2 ("drm/amdgpu: Auto-validate DMABuf imports in compute VMs")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Free the sync object if the memory allocation fails for any
reason.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Handle case that dma_fence_get_rcu_safe returns NULL.
If restore work is already scheduled, only update its timer. The same
work item cannot be queued twice, so undo the extra queue eviction.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Gang BA <Gang.Ba@amd.com>
Reviewed-by: Gang BA <Gang.Ba@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.
Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
=HouD
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-04-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
In V3D, the conclusion of a job is indicated by a IRQ. When a job
finishes, then we update the local and the global GPU stats of that
queue. But, while the GPU stats are being updated, a user might be
reading the stats from sysfs or fdinfo.
For example, on `gpu_stats_show()`, we could think about a scenario where
`v3d->queue[queue].start_ns != 0`, then an interrupt happens, we update
the value of `v3d->queue[queue].start_ns` to 0, we come back to
`gpu_stats_show()` to calculate `active_runtime` and now,
`active_runtime = timestamp`.
In this simple example, the user would see a spike in the queue usage,
that didn't match reality.
In order to address this issue properly, use a seqcount to protect read
and write sections of the code.
Fixes: 09a93cc4f7 ("drm/v3d: Implement show_fdinfo() callback for GPU usage stats")
Reported-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-7-mcanal@igalia.com
Create a function to decouple the stats calculation from the printing.
This will be useful in the next step when we add a seqcount to protect
the stats.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-6-mcanal@igalia.com
Given a set of GPU stats, that is, a `struct v3d_stats` related to a
queue in a given context, create a function that can update this set
of GPU stats.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-5-mcanal@igalia.com
This will make it easier to instantiate the GPU stats variables and it
will create a structure where we can store all the variables that refer
to GPU stats.
Note that, when we created the struct `v3d_stats`, we renamed
`jobs_sent` to `jobs_completed`. This better express the semantics of
the variable, as we are only accounting jobs that have been completed.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-4-mcanal@igalia.com
Currently, we manually perform all operations to update the GPU stats
variables. Apart from the code repetition, this is very prone to errors,
as we can see on commit 35f4f8c9fc ("drm/v3d: Don't increment
`enabled_ns` twice").
Therefore, create two functions to manage updating all GPU stats
variables. Now, the jobs only need to call for `v3d_job_update_stats()`
when the job is done and `v3d_job_start_stats()` when starting the job.
Co-developed-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-3-mcanal@igalia.com
Make SVM BOs more likely to get evicted than other BOs. These BOs
opportunistically use available VRAM, but can fall back relatively
seamlessly to system memory. It also avoids SVM migrations evicting
other, more important BOs as they will evict other SVM allocations
first.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c: dcn32/dcn32_clk_mgr.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8789
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid returning an uninitialized value if we never enter the loop.
This case should never be hit in practice, but returning 0 doesn't
hurt.
The same fix is applied to the 4 places using the same pattern.
v2: - fixed typos in commit message (Alex)
- use "return 0;" before the done label instead of initializing
r to 0
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Makes it easier to review the logs when there are MES
errors.
v2: use dbg for emitted, add helpers for fetching strings
v3: fix missing commas (Harish)
v4: drop command prefixes (Felix)
v5: squash in bounds fix (Jun)
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed by Shaoyun.liu <Shaoyun.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vpe dpm settings should be done before firmware is loaded.
Otherwise, the frequency cannot be successfully raised.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDP Flush request bit can be kept unique per AID, and doesn't need to be
unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the od status info if it's not supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to support more test cases, support user
change reset_method at runtime.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not really an error since the devices don't support
the necessary hardware functionality.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3331
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hs_rate and lp_rate may be used by the dsi host for timing
calculations. The tc358775 has a maximum bit rate of 1 Gbps/lane,
tc358765 has maximurate of 800 Mbps per lane.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-11-tony@atomide.com
The tc358775 bridge is pin compatible with earlier tc358765 according to
the tc358774xbg_datasheet_en_20190118.pdf documentation. Compared to the
tc358765, the tc358775 supports a STBY GPIO and higher data rates.
The tc358765 has a register bit for video event mode vs video pulse mode.
We must set it to video event mode for the LCD output to work, and on the
tc358775, this bit no longer exists.
Looks like the registers seem to match otherwise based on a quick glance
comparing the defines to the earlier Android kernel tc358765 driver.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-10-tony@atomide.com
Set pre_enable_prev_first to ensure the previous bridge is enabled
first.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-9-tony@atomide.com
Burst and low-power modes are supported both for tc358765 and tc358775.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-8-tony@atomide.com
The current code assumes the data-lanes property is configured on the
DSI host side instead of the bridge side, and assumes DSI host endpoint 1.
Let's standardize on what the other bridge drivers are doing and parse the
data-lanes property for the bridge. Only if data-lanes property is not found,
let's be nice and also check the DSI host for old dtb in use and warn.
And as Dmitry pointed out, the lanes for the host and the bridge may be
different because the lanes may be swapped on the host side.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-7-tony@atomide.com
The stby pin is optional. It is only needed for power-up and down
sequencing. It is not needed, if the power rails cannot by dynamically
enabled.
Because the GPIO is now optional, remove the error message.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-6-tony@atomide.com
The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).
While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.
Tested with a jeida-18 display (Evervision VGG644804).
Fixes: b26975593b ("display/drm/bridge: TC358775 DSI/LVDS driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-5-tony@atomide.com
Stop relying on the dev_priv local variable in the DSI register
macros. Pass struct intel_display pointer to the macros. Move the MIPI
DSI MMIO base selection to a different level, passing it to _MMIO_MIPI()
and doing the addition there.
Start using the local display variable for all intel_de_* usage, and
opportunistically use it for other things than display registers as
well.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6dd52f3fce3527242479aadc276d05de74ceae5d.1713520813.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In dpu_core_irq_callback_handler() callback function pointer is compared to NULL,
but then callback function is unconditionally called by this pointer.
Fix this bug by adding conditional return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c929ac60b3 ("drm/msm/dpu: allow just single IRQ callback")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/588237/
Link: https://lore.kernel.org/r/20240408085523.12231-1-amishin@t-argos.ru
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MDP4 and MDP5 drivers enumerate supported formats each time the plane is
created. In preparation to merger of MDP DPU format databases, define
precise formats list, so that changes to the database do not cause the
driver to add unsupported format to the list.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590421/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-2-9e93226cbffd@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com
By default CT code was passing just payload of the G2H event
message, while Relay code expects full G2H message including
HXG header which contains DATA0 field. Fix that.
Fixes: 26d4481ac2 ("drm/xe/guc: Start handling GuC Relay event messages")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419150351.358-1-michal.wajdeczko@intel.com
This function is using internal helper pf_get_spare_ggtt() that
expects PF's master mutex to be locked. Fix that.
Fixes: ac6598aed1 ("drm/xe/pf: Add support to configure SR-IOV VFs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419141000.314-1-michal.wajdeczko@intel.com
Add a new test case for the drm buddy clear and dirty
allocation.
v2:(Matthew)
- make size as u32
- rename PAGE_SIZE with SZ_4K
- dont fragment the address space for all the order allocation
iterations. we can do it once and just increment and allocate
the size.
- create new mm with non power-of-two size to ensure the multi-root
force_merge during fini.
v3:
- add randomness in size calculation(Matthew)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Add clear page support in vram memory region.
v1(Christian):
- Dont handle clear page as TTM flag since when moving the BO back
in from GTT again we don't need that.
- Make a specialized version of amdgpu_fill_buffer() which only
clears the VRAM areas which are not already cleared
- Drop the TTM_PL_FLAG_WIPE_ON_RELEASE check in
amdgpu_object.c
v2:
- Modify the function name amdgpu_ttm_* (Alex)
- Drop the delayed parameter (Christian)
- handle amdgpu_res_cleared(&cursor) just above the size
calculation (Christian)
- Use AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE for clearing the buffers
in the free path to properly wait for fences etc.. (Christian)
v3(Christian):
- Remove buffer clear code in VRAM manager instead change the
AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE handling to set
the DRM_BUDDY_CLEARED flag.
- Remove ! from amdgpu_res_cleared(&cursor) check.
v4(Christian):
- vres flag setting move to vram manager file
- use dma_fence_get_stub in amdgpu_ttm_clear_buffer function
- make fence a mandatory parameter and drop the if and the get/put dance
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
- Add tracking clear page feature.
- Driver should enable the DRM_BUDDY_CLEARED flag if it
successfully clears the blocks in the free path. On the otherhand,
DRM buddy marks each block as cleared.
- Track the available cleared pages size
- If driver requests cleared memory we prefer cleared memory
but fallback to uncleared if we can't find the cleared blocks.
when driver requests uncleared memory we try to use uncleared but
fallback to cleared memory if necessary.
- When a block gets freed we clear it and mark the freed block as cleared,
when there are buddies which are cleared as well we can merge them.
Otherwise, we prefer to keep the blocks as separated.
- Add a function to support defragmentation.
v1:
- Depends on the flag check DRM_BUDDY_CLEARED, enable the block as
cleared. Else, reset the clear flag for each block in the list(Christian)
- For merging the 2 cleared blocks compare as below,
drm_buddy_is_clear(block) != drm_buddy_is_clear(buddy)(Christian)
- Defragment the memory beginning from min_order
till the required memory space is available.
v2: (Matthew)
- Add a wrapper drm_buddy_free_list_internal for the freeing of blocks
operation within drm buddy.
- Write a macro block_incompatible() to allocate the required blocks.
- Update the xe driver for the drm_buddy_free_list change in arguments.
- add a warning if the two blocks are incompatible on
defragmentation
- call full defragmentation in the fini() function
- place a condition to test if min_order is equal to 0
- replace the list with safe_reverse() variant as we might
remove the block from the list.
v3:
- fix Gitlab user reported lockup issue.
- Keep DRM_BUDDY_HEADER_CLEAR define sorted(Matthew)
- modify to pass the root order instead max_order in fini()
function(Matthew)
- change bool 1 to true(Matthew)
- add check if min_block_size is power of 2(Matthew)
- modify the min_block_size datatype to u64(Matthew)
v4:
- rename the function drm_buddy_defrag with __force_merge.
- Include __force_merge directly in drm buddy file and remove
the defrag use in amdgpu driver.
- Remove list_empty() check(Matthew)
- Remove unnecessary space, headers and placement of new variables(Matthew)
- Add a unit test case(Matthew)
v5:
- remove force merge support to actual range allocation and not to bail
out when contains && split(Matthew)
- add range support to force merge function.
v6:
- modify the alloc_range() function clear page non merged blocks
allocation(Matthew)
- correct the list_insert function name(Matthew).
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The dmc_firmware_path parameter is clearly a display parameter. Move it
there so it's available to both i915 and xe modules. This also cleans up
the ugly member in struct xe_device.
v2:
- New try with the NULL/"" param value issue resolved
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c8223b68fdafbc72bee0bf5afdb2ab15261cf00.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The distinction between the dmc_firmware_path module param being NULL
and the empty string "" is problematic. It's not possible to set the
parameter back to NULL via sysfs or debugfs. Remove the distinction, and
consider NULL and the empty string to be the same thing, and use the
platform default for them.
This removes the possibility to disable DMC (and runtime PM) via
i915.dmc_firmware_path="". Instead, use "/dev/null" as the magic
firmware path to skip DMC firmware loading and disable runtime PM.
v2: Add support for i915.dmc_firmware_path="/dev/null" (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8695aca8a6643e36bb680bc2dcab97c637e70b00.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Return failures from parse_dmc_fw() instead of relying on
intel_dmc_has_payload(). Handle and error report them slightly better,
including a new error message for when the firmware does not contain the
main program.
v2: Print specific error message for payload not found (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18833681978ec3ac779cce943221cc5b532c7c45.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clarify request_firmware() error handling. Don't proceed to trying to
parse non-existent firmware or check for payload when request_firmware()
failed to begin with. There's no reason to release_firmware() either
when request_firmware() failed.
Also move the message about DMC firmware homepage here, as in other
cases the user probably has some firmware, although its parsing fails
for some reason.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0654bb3480f8d2103225d26f665badead5495532.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch correct calculation formula of PHY timing.
The spec define HS-PREPARE should be from 40ns+4*UI(44ns) to
85ns+6*UI(91ns). But current duration is 88ns and is near the boundary.
So this patch make the duration to 64ns so it is near the safe range.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In case there is no DP device attached to the port the
transfer function should return IO error, similar to what
other drivers do.
In case EAGAIN is returned then any read from /dev/drm_dp_aux
device ends up in an infinite loop as the upper layers
constantly repeats the transfer request.
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Wojciech Macek <wmacek@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240417103819.990512-1-wmacek@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Just like the active interface and writeback block in ctl_intf_cfg_v1(),
and later the rest of the blocks in followup active-CTL fixes or
reworks, multiple calls to this function should enable additional DSC
blocks instead of overwriting the blocks that are enabled.
This pattern is observed in an active-CTL scenario since DPU 5.0.0 where
for example bonded-DSI uses a single CTL to drive multiple INTFs, and
each encoder calls this function individually with the INTF (hence the
pre-existing update instead of overwrite of this bitmask) and DSC blocks
it wishes to be enabled, and expects them to be OR'd into the bitmask.
The reverse already exists in reset_intf_cfg_v1() where only specified
DSC blocks are removed out of the CTL_DSC_ACTIVE bitmask (same for all
other blocks and ACTIVE bitmasks), leaving the rest enabled.
Fixes: 77f6da9048 ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589902/
Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-4-78ae3ee9a697@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When dual-DSI (bonded DSI) was added in commit ed9976a09b
("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints
were not updated, leading to print the original mode->clock rather
than the adjusted (typically the mode clock divided by two, though more
recently also adjusted for DSC compression) msm_host->pixel_clk_rate
which is passed to clk_set_rate() just below. Fix that by printing the
actual pixel_clk_rate that is being set.
Fixes: ed9976a09b ("drm/msm/dsi: adjust dsi timing for dual dsi mode")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589896/
Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the MSM DSI driver looks for the next bridge during
msm_dsi_modeset_init(). If the bridge is not registered at that point,
this might result in -EPROBE_DEFER, which can be problematic that late
during the device probe process. Move next bridge acquisition to the
dsi_bind state so that probe deferral is returned as early as possible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/582210/
Link: https://lore.kernel.org/r/20240309-fd-dsi-cleanup-bridges-v1-2-962ebdba82ed@linaro.org
The gen_header.py script is failing for older versions of python3 such
as python 3.5. Two issues observed with python 3.5 are ...
1. Python 3 versions prior to 3.6 do not support the f-string format.
2. Early python 3 versions do not support the 'required' argument for
the argparse add_subparsers().
Fix both of the above so that older versions of python 3 still work.
Fixes: 8f7abf0b86fe ("drm/msm: generate headers on the fly")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589427/
Link: https://lore.kernel.org/r/20240412165407.42163-1-jonathanh@nvidia.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The dp_audio read and write operations uses members in struct dp_catalog
for passing arguments and return values. This adds unnecessary
complexity to the implementation, as it turns out after detangling the
logic that no state is actually held in these variables.
Clean this up by using function arguments and return values for passing
the data.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/585350/
Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-6-a5aed9798d32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dp_catalog_panel_timing_cfg() takes 4 arguments, which are passed from
the calling function through members of struct dp_catalog.
No state is maintained other than across this call, so switch to
function arguments to clean up the code.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/585351/
Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-5-a5aed9798d32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The dp_aux write operations takes the data to be operated on through a
member of struct dp_catalog, rather than as an argument to the function.
No state is maintained other than across the calling of the functions,
so replace this member with a function argument.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/585346/
Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-4-a5aed9798d32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The "desc" member of struct dp_panel is zero-initialized during
allocation and never assigned, resulting in dp_ctrl_use_fixed_nvid()
never returning true. This returned boolean value is passed around but
never acted upon.
Perform constant propagation and remove the traces of "fixed nvid".
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/585344/
Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-2-a5aed9798d32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The members of struct dp_debug are no longer used, so the only purpose
of this struct is as a type of the return value of dp_debug_get(), to
signal success/error.
Drop the struct in favor of signalling the result of initialization
using an int, then merge dp_debug_get() with dp_debug_init() to avoid
the unnecessar boilerplate code.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/585343/
Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-1-a5aed9798d32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Logging u32 pixel formats using %4.4s format string with a pointer to
the u32 is somewhat questionable, as well as dependent on byte
order. There's a kernel extension format specifier %p4cc to format 4cc
codes. Use it across the board in msm for pixel format logging.
This should also fix the reported build warning:
include/drm/drm_print.h:536:35: warning: '%4.4s' directive argument is
null [-Wformat-overflow=]
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/r/2ac758ce-a196-4e89-a397-488ba31014c4@arm.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Patchwork: https://patchwork.freedesktop.org/patch/587758/
Link: https://lore.kernel.org/r/20240405092907.2334007-1-jani.nikula@intel.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Before the introduction of the wait_hpd_asserted() callback in
commit 841d742f09 ("drm/dp: Add wait_hpd_asserted() callback to struct
drm_dp_aux") the API between panel drivers and DP AUX bus drivers was
that it was up to the AUX bus driver to wait for HPD in the transfer()
function.
Now wait_hpd_asserted() has been added. The two panel drivers that are
DP AUX endpoints use it. See commit 2327b13d6c ("drm/panel-edp: Take
advantage of wait_hpd_asserted() in struct drm_dp_aux") and
commit 3b5765df37 ("drm/panel: atna33xc20: Take advantage of
wait_hpd_asserted() in struct drm_dp_aux"). We've implemented
wait_hpd_asserted() in the MSM DP driver as of commit e2969ee302
("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()"). There is
no longer any reason for long wait in the AUX transfer() function.
Remove it.
NOTE: the wait_hpd_asserted() is listed as "optional". That means it's
optional for the DP AUX bus to implement. In the case of the MSM DP
driver we implement it so we can assume it will be called.
ALSO NOTE: the wait wasn't actually _hurting_ anything and wasn't even
causing long timeouts, but it's still nice to get rid of unneeded
code. Specificaly it's not truly needed because to handle other DP
drivers that can't power on as quickly (specifically parade-ps8640) we
already avoid DP AUX transfers for eDP panels that aren't powered
on. See commit 8df1ddb5bf ("drm/dp: Don't attempt AUX transfers when
eDP panels are not powered").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/583130/
Link: https://lore.kernel.org/r/20240315143621.v2.3.I535606f6d4f7e3e5588bb75c55996f61980183cd@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Let's simply convert all the current callers towards direct
xe_pm_runtime access and remove this extra layer of indirection.
No functional change is expected with this patch since
xe_mem_access_get was already using the xe_pm_runtime_get_noresume
at this point.
v2: Convert all the current callers instead of a big refactor
at once.
v3: - Rebased
- Squashed the GSC/HDCP
- Added a new case: sriov_pf_policy
- Improved commit message to highlight that
there's no functional change in this patch.
Reviewed-by: Matthew Auld <matthew.auld@intel.com> #v2
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240418143049.43231-1-rodrigo.vivi@intel.com
DisplayID spec v1.3 revision history notes do claim that
the toplogy block was added in v1.3 so requiring structure
v1.2 would seem correct, but there is at least one EDID in
edid.tv with a topology block and structure v1.0. And
there are also EDIDs with DisplayID structure v1.3 which
seems to be totally incorrect as DisplayID spec v1.3 lists
structure v1.2 as the only legal value.
Unfortunately I couldn't find copies of DisplayID spec
v1.0-v1.2 anywhere (even on vesa.org), so I'll have to
go on empirical evidence alone.
We used to parse the topology block on all v1.x
structures until the check for structure v2.0 was added.
Let's go back to doing that as the evidence does suggest
that there are DisplayIDs in the wild that would miss
out on the topology stuff otherwise.
Also toss out DISPLAY_ID_STRUCTURE_VER_12 entirely as
it doesn't appear we can really use it for anything.
I *think* we could technically skip all the structure
version checks as the block tags shouldn't conflict
between v2.0 and v1.x. But no harm in having a bit of
extra sanity checks I guess.
So far I'm not aware of any user reported regressions
from overly strict check, but I do know that it broke
igt/kms_tiled_display's fake DisplayID as that one
gets generated with structure v1.0.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: c5a486af9d ("drm/edid: parse Tiled Display Topology Data Block for DisplayID 2.0")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410180139.21352-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
These variables should be u32 instead of u64 because they're only
storing u32 values. Also static checkers complain when we do:
suspended_slots &= ~upd_ctx.timedout_mask;
In this code "suspended_slots" is a u64 and "upd_ctx.timedout_mask". The
mask clears out the top 32 bits which would likely be a bug if anything
were stored there.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85356b15-4840-4e64-8c75-922cdd6a5fef@moroto.mountain
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYlapoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJLgH/RFrsXefpxAWACJv
wRmIx/YFjI3Z4nypBZPXysX/JOuf/cf4bR22jMHC1vhQDtxVgB7eUpEYx0C0Y5RD
ll7cunAZCpP+PB725/bOWbaF94eigl8xC4RrKPon4tG1CS9NAvCJFDyNgWpqh48s
sSKKae68a16zMtIX5Za8nvmsBQOeD67ZFBgI4m7wIDDhTXY3XlG84r8Rz/ZwcdE/
rExFkDMUqjpoJVAMBtETQNk4pvKZVMrW2B0f/xZSR+IKXw5l2FO0raXkIG/6TERs
CxJvCuUjKIosqFLIK2O/cU9G+5V2axZ/WD8YRwDr2vlnnOPht+dFQzyPcuSqezbG
ShIhQo8=
=GI5F
-----END PGP SIGNATURE-----
Backmerge tag 'v6.9-rc5' into drm-next
Linux 6.9-rc5
I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-next for v6.10-rc1:
UAPI Changes:
- Add SIZE_HINTS property for cursor planes.
Cross-subsystem Changes:
Core Changes:
- Document the requirements and expectations of adding new
driver-specific properties.
- Assorted small fixes to ttm.
- More Kconfig fixes.
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- Fixes for drm-panic, and option to test it.
- Assorted small fixes and updates to edid.
- Add drm_crtc_vblank_crtc and use it in vkms, nouveau.
Driver Changes:
- Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi.
- Add drm panic to simpledrm, mgag200, imx, ast.
- Use dev_err_probe in bridge/panel drivers.
- Add Innolux G121X1-L03, LG sw43408 panels.
- Use struct drm_edid in i915 bios parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
Add consistent definitions for the per-lane PHY TX registers
on bxt/glk. The current situation is a slight mess with some
registers having a LN0 define, while others have a parametrized
per-lane definition.
v2: Adjust gvt accordingly
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417151211.32135-1-ville.syrjala@linux.intel.com
Old and new state parameters are swapped, so the old state was cleared
instead of the new duplicated state.
Fixes: 903674588a ("drm/atomic-helper: Add format-conversion state to shadow-plane state")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404081756.2714424-1-l.stach@pengutronix.de
Rather than trying to identify exactly which engines are available on
each platform in the IP descriptor, just include the list of all media
engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS).
We still rely on the media fuse registers to tell us which specific
engine instances are actually present on a given platform, so there
shouldn't be any functional change. This will help prevent mistakes
with engine numbering (for example ambiguity about whether the 2nd VCS
engine on a platform with exactly two engines is numbered "VCS1" or
"VCS2") and will also future-proof the code a bit more in case new SKUs
or platform refreshes extend the engine list in the future.
Note that the media fuse register technically has an 8-bit field for
VECS engine presence starting on Xe2. However there's still no MMIO
register range reserved for VE engines above VECS3, so VE0-VE3 is still
consider the "maximum" VE engine mask that the driver can support for
now.
Bspec: 52614, 52615, 62567
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA
monitor results in a blank screen, at least on MTL platforms on UHBR
link rates with some (<30) uncompressed bpp values. Enabling compression
fixes the problem, so do that for now. Windows enables DSC always if the
sink supports it and forcing it to enable the mode without compression
leads to the same problem above (which suggests a panel issue with
uncompressed mode).
The same 5k mode on non-UHBR link rates is not affected and lower
resolution modes are not affected either. The problem is similar to the
one fixed by the HBLANK expansion quirk on Synaptics hubs, with the
difference that the problematic mode has a longer HBLANK duration. Also
the monitor doesn't report supporting HBLANK expansion; either its
internal MST hub does the expansion internally - similarly to the
Synaptics hub - or the issue has another root cause, but still related
to the mode's short HBLANK duration. Enable the quirk for the monitor
adjusting the detection for the above differences.
v2: Rebase on drm_dp_128132b_supported() change.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the
AUX device is used to enable DSC - is all 0. To detect if the HBLANK
expansion quirk is required for this monitor use the OUI of the port's
parent instead.
Since in the above case the DPCD of both the logical port and the parent
port reports being a sink device (vs. branch device) type, read the
proper sink/branch OUI based on the DPCD device type.
This is required by a follow-up patch enabling the quirk for the above
Dell monitor.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-11-imre.deak@intel.com
Add a function to get the AUX device of the parent of an MST port, used
by a follow-up i915 patch in the patchset.
v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch
(Ankit)
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
Factor out a function to check if an MST port is logical, used by a
follow-up i915 patch in the patchset.
v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next
patch. (Ankit)
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
Factor out a function to check for 128b/132b channel coding support used
by a follow-up patch in the patchset.
v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported()
(Jani)
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
Instead of checking each compressed bpp value against the maximum
DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and
limiting the range of bpps looped over using this maximum.
While at it add a comment about the origin of the DSC/DPT bpp limit.
Bspec: 49259, 68912
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-7-imre.deak@intel.com
The DSC DPT interface BW limit check should take into account the link
clock's (aka DDI clock in bspec) channel coding efficiency overhead.
Bspec suggests that the FEC overhead needs to be applied, however HW
people claim this isn't the case, nor is any overhead applicable.
However based on testing various 5k/6k modes both on the DELL U3224KBA
monitor and the Unigraf UCD-500 CTS test device, both the channel coding
efficiency (which includes the FEC overhead) and an additional 3%
overhead must be accounted for to get these modes working.
Bspec: 49259
v2:
- Apply an additional 3% overhead, add a commit log and code comment
about these overheads and the relation to the Bspec BW limit formula.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-5-imre.deak@intel.com
The expected link symbol clock unit when calculating the DSC DPT bpp
limit is kSymbols/sec, aligning with the dotclock's kPixels/sec unit
based on the crtc clock. As opposed to this port_clock is used - which
has a 10 kbits/sec unit - with the resulting symbol clock in 10
kSymbols/sec units (disregarding the rounding error for the 13.5Gbps
rate). Fix the calculation using the expected 10x factor.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-3-imre.deak@intel.com
Fix the calculation of the DSC line buffer depth. This is limited both
by the source's and sink's maximum line buffer depth, but the former one
was not taken into account. On all Intel platform's the source's maximum
buffer depth is 13, so the overall limit is simply the minimum of the
source/sink's limit, regardless of the DSC version.
This leaves the DSI DSC line buffer depth calculation as-is, trusting
VBT.
On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16
the line buffer depth was incorrectly programmed as 0, leading to a
corruption in color gradients / lines on the decompressed screen image.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
The current intel_bw_atomic_check do not check the possbility
of a sagv configuration change after the hw state readout.
Hence cannot update the sagv configuration until some other
relevant changes like data rates, number of planes etc. happen.
Introduce a flag to force qgv check in such cases.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-7-vinod.govindapillai@intel.com
There could be multiple qgv and psf gv points with similar values.
Apparently pcode's handling of psf and qgv points are different. For
qgv case, pcode sets whatever is asked by the driver. But in case
of psf gv points, it compares the bw from points before setting the
mask. This can cause problems in scenarios where we have to disable
sagv by setting the highest bw point and there could be multiple
points with highest bw. So to set the maximum psf gv point, find
out all the points with the highest bw and set all together.
v1: - use the same treatment to qgv points as well (Vinod)
v2: - pcode confirms that for qgv points, it sets whatever the
driver sets (Vinod)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-6-vinod.govindapillai@intel.com
Problem is that on some platforms, we do get QGV point mask in wrong
state on boot. However driver assumes it is set to 0
(i.e all points allowed), however in reality we might get them all
restricted, causing issues.
Lets disable SAGV initially to force proper QGV point state.
If more QGV points are available, driver will recalculate and update
those then after next commit.
v2: - Added trace to see which QGV/PSF GV point is used when SAGV is
disabled.
v3: - Move force disable function to intel_bw_init in order to initialize
bw state as well, so that hw/sw are immediately in sync after init.
v4: - Don't try sending PCode request, seems like it is not possible at
intel_bw_init, however assigning bw->state to be restricted as if
SAGV is off, still forces driveer to send PCode request anyway on
next modeset, so the solution still works.
However we still need to address the case, when no display is
connected, which anyway requires much more changes.
v5: - Put PCode request back and apply temporary hack to make the
request succeed(in case if there 2 PSF GV points with same BW, PCode
accepts only if both points are restricted/unrestricted same time)
- Fix argument sequence for adl_qgv_bw(Ville Syrjälä)
v6: - Fix wrong platform checks, not to break everything else.
v7: - Split the handling of quplicate QGV/PSF GV points (Vinod)
Restrict force disable to display version below 14 (Vinod)
v8: - Simplify icl_force_disable_sagv (Vinod)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
We need that in order to force disable SAGV in next patch.
Also it is beneficial to separate that code, as in majority cases,
when SAGV is enabled, we don't even need those calculations.
Also we probably need to determine max PSF GV point as well, however
currently we don't do that when we disable SAGV, which might be
actually causing some issues in that case.
v2: - Introduce helper adl_qgv_bw(counterpart to adl_psf_bw)
(Ville Syrjälä)
- Don't restrict psf gv points for SAGV disable case
(Ville Syrjälä)
v3: - Update icl_max_bw_qgv_point_mask to return max qgv point
mask (Vinod)
v4: - Minor changes in icl_find_qgv_points (Vinod)
v5: - use max_bw_point instead of max_bw_point_mask (stan)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-3-vinod.govindapillai@intel.com
For debug purposes we need those - error path won't flood the log,
however there has been already numerous cases, when due to lack
of debugs, we couldn't immediately tell what was the problem on
customer machine, which slowed down the investigation, requiring
to get access to target device and adding those traces manually.
v2: - Make the debug more generic and move it to intel_dram_detect
(Gustavo Sousa)
v3: - Use %u for unsigned variable in debug prints (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-2-vinod.govindapillai@intel.com
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330202754.83907-1-krzysztof.kozlowski@linaro.org
For the cbcr format, gt2 and gt4 are computed again after src_h has been
divided by vsub.
As src_h as already been divided by 2 before, introduce cbcr_src_h and
cbcr_src_w to keep a copy of those values to be used for cbcr gt2 and
gt4 computation.
This fixes yuv planes being unaligned vertically when down scaling to
1080 pixels from 2160.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240414182706.655270-1-detlev.casanova@collabora.com
In the past, the noresume function was used by the GEM code to ensure
wakelocks were held and bump its usage. This is no longer the case
and this function was totally unused until it started to be used again
by display with commit 77e619a82f ("drm/i915/display: convert inner
wakeref get towards get_if_in_use")
However, on the display code, most of the callers are using the
raw wakeref, rather then the wakelock version. What caused a
major regression caught by CI.
Another option to this patch is to go with the original plan and
use the get_if_in_use variant in the display code, what is enough
to fulfil our needs. Then, an extra patch to delete the unused
_noresume variant.
v2: Keep grabbing wakelock but only assert for wakeref. (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 77e619a82f ("drm/i915/display: convert inner wakeref get towards get_if_in_use")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10875
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240418223756.68427-1-rodrigo.vivi@intel.com
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
=JvZN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-04-17-1' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes (DRM):
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
# E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
# bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
# 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
# 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
# ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
# 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
# =JvZN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
When page table BOs were evicted but not validated before
updating page tables, VM is still in evicting state,
amdgpu_vm_update_range returns -EBUSY and
restore_process_worker runs into a dead loop.
v2: Split the BO validation and page table update into two
separate loops in amdgpu_amdkfd_restore_process_bos. (Felix)
1.Validate BOs
2.Validate VM (and DMABuf attachments)
3.Update page tables for the BOs validated above
Fixes: 50661eb1a2 ("drm/amdgpu: Auto-validate DMABuf imports in compute VMs")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free the sync object if the memory allocation fails for any
reason.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle case that dma_fence_get_rcu_safe returns NULL.
If restore work is already scheduled, only update its timer. The same
work item cannot be queued twice, so undo the extra queue eviction.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Gang BA <Gang.Ba@amd.com>
Reviewed-by: Gang BA <Gang.Ba@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host will initiate an FLR for all poison consumption.
Guest should wait for FLR message to re-init data exchange.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX 9.4.3 SOCs, only 2 SDMA instances need to be available to be
considered as a valid AID.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.
Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable redirection of irq for pagefaults for specific
clients to avoid overflow without dropping interrupts.
So here we redirect the interrupts to another IH ring
i.e ring1 where only these interrupts are processed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In passthrough environment, the driver triggers the mode-1 reset on
reload. The reset causes the core dump collection which is delayed task
and prevents driver from unloading until it is completed. Since we do
not need to collect data on "reset on reload" case, we can skip core
dump collection.
v2: Use the same flag to avoid calling amdgpu_reset_reg_dumps as well.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable redirection of irq for pagefaults for specific
clients to avoid overflow without dropping interrupts.
So here we redirect the interrupts to another IH ring
i.e ring1 where only these interrupts are processed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add offsets, mask and shift macros for IH v6.0
which are needed to configure ring1 client irq
redirection.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mode-2 reset is the only reliable method that can get
GC/SDMA back when poison is consumed. mmhub requires
mode-1 reset.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need IH ring1 for handling the pagefault
interrupts which over flow in default
ring for specific usecases.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need IH ring1 for handling the pagefault
interrupts which are overflowing the default
ring for specific usecases.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LG SW43408 is 1080x2160@60Hz, 4-lane MIPI-DSI panel, used in some
Google Pixel-3 phones.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[vinod: Add DSC support]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[caleb: cleanup and support turning off the panel]
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[DB: partially rewrote the driver and fixed DSC programming]
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-4-4e092da22991@linaro.org
The functions mipi_dsi_compression_mode() and
mipi_dsi_picture_parameter_set() return 0-or-error rather than a buffer
size. Follow example of other similar MIPI DSI functions and use int
return type instead of size_t.
Fixes: f4dea1aaa9 ("drm/dsi: add helpers for DSI compression mode and PPS packets")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-2-4e092da22991@linaro.org
When both hwmon and hwmon drvdata (on which hwmon depends) are device
managed resources, the expectation, on device unbind, is that hwmon will be
released before drvdata. However, in i915 there are two separate code
paths, which both release either drvdata or hwmon and either can be
released before the other. These code paths (for device unbind) are as
follows (see also the bug referenced below):
Call Trace:
release_nodes+0x11/0x70
devres_release_group+0xb2/0x110
component_unbind_all+0x8d/0xa0
component_del+0xa5/0x140
intel_pxp_tee_component_fini+0x29/0x40 [i915]
intel_pxp_fini+0x33/0x80 [i915]
i915_driver_remove+0x4c/0x120 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x32/0xa0
device_release_driver_internal+0x19c/0x200
unbind_store+0x9c/0xb0
and
Call Trace:
release_nodes+0x11/0x70
devres_release_all+0x8a/0xc0
device_unbind_cleanup+0x9/0x70
device_release_driver_internal+0x1c1/0x200
unbind_store+0x9c/0xb0
This means that in i915, if use devm, we cannot gurantee that hwmon will
always be released before drvdata. Which means that we have a uaf if hwmon
sysfs is accessed when drvdata has been released but hwmon hasn't.
The only way out of this seems to be do get rid of devm_ and release/free
everything explicitly during device unbind.
v2: Change commit message and other minor code changes
v3: Cleanup from i915_hwmon_register on error (Armin Wolf)
v4: Eliminate potential static analyzer warning (Rodrigo)
Eliminate fetch_and_zero (Jani)
v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10366
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417145646.793223-1-ashutosh.dixit@intel.com
- Fix use-after-free due to order vm is put and destroyed
-----BEGIN PGP SIGNATURE-----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=x39h
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-04-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix bo leak on error path during fb init
- Fix use-after-free due to order vm is put and destroyed
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/xjguifyantaibyrnymuiotxws6akiexi6r7tqyieqxgquovubc@kkrtbe24hjjr
xe_pm_init may encounter failures for various reasons, such as a failure
in initializing drmm_mutex, or when dealing with a d3cold-capable device
for vram_threshold sysfs creation and setting default threshold.
Presently, all these potential failures are disregarded.
Move d3cold.lock initialization to xe_pm_init_early and cause driver
abort if mutex initialization has failed.
For xe_pm_init failures cleanup the driver and return error code
-v2
Make mutex init cleaner (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-8-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Ensure that the status of all tile associated sysfs entries creation is
relayed to xe_tile_init_noalloc, leading to a driver load abort if any
sysfs creation failures occur.
-v2
Avoid unnecessary warn/error messages. (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-7-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of allowing the driver to load with incomplete sysfs entries in
case of sysfs creation failure, we should terminate the driver loading.
This change ensures that the status of all gt associated sysfs entries
creation is relayed to xe_gt_init, leading to a driver load abort if any
sysfs creation failures occur.
-v2
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-6-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In case of drmm_add_action_or_reset failure return NULL and no need
to print warning messages as they will be printed implictly.
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-5-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the
action (free_gsc_pkt) in the event of a failure; therefore, there's no
necessity to call it within the return check.
-v2
Fix commit message. (Lucas)
Fixes: d8b1571312 ("drm/xe/huc: HuC authentication via GSC")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-4-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the action
(sysfs removal) in the event of a failure; therefore, there's no
necessity to call it within the return check.
Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the
caller to pass errors up the call chain. Should sysfs creation or
drmm_add_action_or_reset fail, error propagation will prompt a driver
load abort.
-v2
Edit commit message (Nikula/Lucas)
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Fixes: f3bc5bb4d5 ("drm/xe: Allow userspace to configure CCS mode")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of assigning the value of drmm_add_action_or_reset() to err and
returning err in case of failure and 0 in case of success, simply return
the result of drmm_add_action_or_reset().
-v2:
cleanup in xe_display too.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
It would be too much noise to convert the intel_de_* functions from
using struct drm_i915_private to struct intel_display all at once. Add
generic wrappers using __to_intel_display() to accept both.
v2: Take the intel_dmc_wl_* changes into account
Cc: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1b0e8e7c732535e18c8498a2e18fe1e4c123e2f5.1713358679.git.jani.nikula@intel.com
Add generic __to_intel_display() macro that accepts either struct
drm_i915_private * or struct intel_display *. This is to be used for
transitional stuff that eventually needs to be converted to use struct
intel_display *, and therefore is not part of to_intel_display().
Add new intel_display_conversion.h to host the helper to avoid
duplication between xe and i915 drivers.
v2: put it in the new header (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a999ff8183659a4df68d439ebd31c19b5c56852a.1713358679.git.jani.nikula@intel.com
Convert various pointers to struct intel_display * using _Generic().
Add some macro magic to make adding new conversions easier, and somewhat
abstract the need to cast each generic association. The cast is required
because all associations needs to compile, regardless of the type and
the generic selection.
The use of *p in the generic selection assignment expression removes the
need to add separate associations for const pointers.
Note: This intentionally does *not* cover struct drm_i915_private or
struct xe_device. They are not to be used in the long run, so avoid
using this macro for them.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/02cf407961200db4379370856c779ea62b3eaa90.1713358679.git.jani.nikula@intel.com
Any kunit doing any memory access should get their own runtime_pm
outer references since they don't use the standard driver API
entries. In special this dma_buf from the same driver.
Found by pre-merge CI on adding WARN calls for unprotected
inner callers:
<6> [318.639739] # xe_dma_buf_kunit: running xe_test_dmabuf_import_same_driver
<4> [318.639957] ------------[ cut here ]------------
<4> [318.639967] xe 0000:4d:00.0: Missing outer runtime PM protection
<4> [318.640049] WARNING: CPU: 117 PID: 3832 at drivers/gpu/drm/xe/xe_pm.c:533 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-10-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At this point mem_access references should be only used as inner
points of the execution and a get with synchronous resume previously
called at an outer point.
So, before killing mem_acces in favor of direct accsess, let's
ensure that we first convert them towards the new _noresume
variant that will WARN us if no inner caller happened.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-9-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that assert_mem_access is relying directly on the pm_runtime state
instead of the counters, there's no reason why we cannot use
the pm_runtime functions directly.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-8-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The gem page fault is one of the outer bound protections where
we want to ensure that the hardware is in D0 before proceeding
with memory access. Let's convert it towards the xe_pm_runtime
functions directly so we can then convert the mem_access to be
inner protection only and then Kill it for good.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-6-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_pm_init is the very last thing during the xe_pci_probe(),
hence these protections are useless from the point of view
of ensuring that the device is awake.
Let's remove it so we continue towards the goal of killing
xe_device_mem_access.
v2: Adding more cases
v3: Provide a separate fix for xe_tile_init_noalloc return (Matt)
Adding a new case where display HDCP init calls which
are also called at display probe time.
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The mem_access itself is not holding any lock, but attempting
to train lockdep with possible scarring locks happening during
runtime pm. We are going soon to kill the mem_access get and put
helpers in favor of direct xe_pm_runtime calls, so let's just
move this lock around to where it now belongs.
v2: s/lockdep_training/lockdep_prime (Matt Auld)
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch brings no functional change. Since at this point of
the code we are already asserting a wakeref was held, it means
that we are with runtime_pm 'in_use' and in practical terms we
are only bumping the pm_runtime usage counter and moving on.
However, xe driver has a lockdep annotation that warned us that
if a sync resume was actually called at this point, we could have
a deadlock because we are inside the power_domains->lock locked
area and the resume would call the irq_reset, which would also
try to get the power_domains->lock.
For this reason, let's convert this call to a safer option and
calm lockdep on.
v2: use _noresume variant instead of get_in_use (Ville, Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's ensure that we have an option for inner callers that will
raise WARN if device is not active and not protected by outer callers.
Make this also a void function forcing every caller to unconditionally
put the reference back afterwards.
This will be very important for cases where we want to hold the
reference before scheduling a work in a queue. Then the work job
will be responsible for putting it back.
While at this, already convert a case from mem_access_get_ongoing where
it is not checking for the reference and put it back, what would
cause the underflow.
v2: Fix identation.
v3: Convert equivalent missing put from mem_access towards pm_runtime.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The pipes that can be used for eDP MSO are limited to pipe A (and
sometimes also pipe B) only for display version 20 and below.
Modify the function that returns the pipe mask for eDP MSO so that
these limitations only apply to version 20 and below, enabling all
pipes otherwise.
Bspec: 68923
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404091646.165309-1-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Replace the open coded drm_crtc_vblank_crtc() with the real
thing.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: "Maíra Canal" <mairacanal@riseup.net>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-5-ville.syrjala@linux.intel.com
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Make life easier by providing a function that hands
out the correct drm_vblank_crtc for a given a drm_crtc.
Also abstract the lower level internals of the vblank
code in a similar fashion.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-1-ville.syrjala@linux.intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Due to a change in the order of initialization, the lid timer got
started before proper setup was made. This resulted in a crash during
boot.
The lid switch is handled by gma500 through a timer that periodically
polls the opregion for changes. These types of ACPI events shouldn't be
handled by the graphics driver so let's get rid of the lid code. This
fixes the crash during boot.
Reported-by: Enrico Bartky <enrico.bartky@gmail.com>
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Tested-by: Enrico Bartky <enrico.bartky@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415112731.31841-1-patrik.r.jakobsson@gmail.com
Enable WA for a bug that could cause the C6 state machine to hang
during RC6 exit.
v2: Add comment clarifying the WA (John H)
v3: Add more details to the comment (John H)
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417054802.1766359-1-vinay.belgaumkar@intel.com
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.
Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit panel, the current configuration uses
18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.
Support for the 24bit mode would require another entry in panel-simple
with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
is out of scope of this fix.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Fixes: f8fa17ba81 ("drm/panel: simple: Add support for Innolux G121X1-L03")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de
Convert a variable sized array from [1] to [].
v2: fix up a few more.
v3: integrate comments from Kees.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2)
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: keescook@chromium.org
The driver parses a union where the layout up through the first
array is the same, however, the array has different sizes
depending on the elements in the union. Be explicit to
fix the UBSAN checker.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kees Cook <keescook@chromium.org>
When we removed the hacky start code check we actually didn't took into
account that *all* VRAM pages needs to be CPU accessible.
Clean up the code and unify the handling into a single helper which
checks if the whole resource is CPU accessible.
The only place where a partial check would make sense is during
eviction, but that is neglitible.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a6804 ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.
Fixes: dc54d3d174 ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2")
Cc: stable@vger.kernel.org
Reported-by: Vlad Stolyarov <hexed@google.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b5abd7f983.
This change breaks DSC on 4k monitors at 144Hz over USB-C.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.
Fixes: 0ab2d7532b ("drm/amdkfd: prepare per-process debug enable and disable")
CC: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The majority of those where removed in the commit aed01a6804
("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
But this one was missed because it's working on the resource and not the
BO. Since we also no longer use a fake start address for visible BOs
this will now trigger invalid mapping errors.
v2: also remove the unused variable
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a6804 ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
CC: stable@vger.kernel.org
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some reason the snps/cx0 PLL states were added into
a union alongside dpll_hw_state. Just suck them into
dpll_hw_state so that we don't have so many levels of
unions/etc.
TODO: Get rid of 'clock' from the snps/cx0 PLL states
as it is not a register values and thus doesn't
belong there
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_dpll_hw_state contains space for all possible PLL
register values across all platforms. That is rather wasteful
as each machine only needs to store the registers values
that are appropriate for the platform.
Turn intel_dpll_hw_state into a union so that we don't
waste memory for the register values of other platforms.
And let's use an anonymous union so that we don't have
to do tons of s/struct/union/ all over the place.
pahole:
struct intel_dpll_hw_state {
- struct i9xx_dpll_hw_state i9xx; /* 0 16 */
- struct hsw_dpll_hw_state hsw; /* 16 8 */
- struct skl_dpll_hw_state skl; /* 24 12 */
- struct bxt_dpll_hw_state bxt; /* 36 44 */
- /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
- struct icl_dpll_hw_state icl; /* 80 60 */
+ union {
+ struct i9xx_dpll_hw_state i9xx; /* 0 16 */
+ struct hsw_dpll_hw_state hsw; /* 0 8 */
+ struct skl_dpll_hw_state skl; /* 0 12 */
+ struct bxt_dpll_hw_state bxt; /* 0 44 */
+ struct icl_dpll_hw_state icl; /* 0 60 */
+ }; /* 0 60 */
- /* size: 140, cachelines: 3, members: 5 */
- /* last cacheline: 12 bytes */
+ /* size: 60, cachelines: 1, members: 1 */
+ /* last cacheline: 60 bytes */
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
