Hyper-V can run VMs at different privilege "levels" known as Virtual
Trust Levels (VTL). Sometimes, it chooses to run two different VMs
at different levels but they share some of their address space. In
such setups VTL2 (higher level VM) has visibility of all of the
VTL0 (level 0) memory space.
When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel
performs a search within the low memory to locate MP tables. However,
in systems where VTL0 manages the low memory and may contain valid
tables, this scanning can result in incorrect MP table information
being provided to the VTL2 kernel, mistakenly considering VTL0's MP
table as its own
Add noop functions to avoid MP parse scan by VTL2.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1690001476-98594-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Several places in code for Hyper-V reference the
per-CPU variable hyperv_pcpu_input_arg. Older code uses a multi-line
sequence to reference the variable, and usually includes a cast.
Newer code does a much simpler direct assignment. The latter is
preferable as the complexity of the older code is unnecessary.
Update older code to use the simpler direct assignment.
Signed-off-by: Nischala Yelchuri <niyelchu@linux.microsoft.com>
Link: https://lore.kernel.org/r/1687286438-9421-1-git-send-email-niyelchu@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
the usage patterns are becoming apparent
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSa9CoACgkQEsHwGGHe
VUr1NhAAjmOq/T41u3FCSU6fZ8gXo5UkIUT13a6cx+6Omx9waJn5G0xdf/380vQN
RPRTcc4cfQHCdnIeHgiz1YtCh1ljxXswOSbexHgWHjEcqadgxkZTlKaBEbqyEwLI
lnRRsowfk7J/8RsYqtzuBvGaWNliiszWE8iayruI1IL+FoEDLlLx1GNYqusP5WIs
0KYm919Zozl8FEZjP47nH4bab1RcE+HGmLG7UEBmR0zHl4cc7iN3wpv2o/vDxVzR
/KP8a2G7J/xjllGW+OP81dFCS7iklHpNuaxQS73fDIL7ll2VDqNemh4ivykCrplo
93twODBwKboKmZhnKc0M2axm5JGGx7IC3KTqEUHzb2Wo4bZCYnrj+9Utzxsa3FxB
m0BSUcmBqzZCsHCbu62N66l1NlB32EnMO80/45NrgGi62YiGP8qQNhy3TiceUNle
NHFkQmRZwLyW5YC1ntSK8fwSu4GrMG1MG/eRfMPDmmsYogiZUm2KIj7XKy3dKXR6
maqifh/raPk3rL+7cl9BQleCDLjnkHNxFxFa329P9K4wrtqn7Ley4izWYAUYhNrl
VOjLs+thTwEmPPgpo/K1wAbR/PjLdmSQ/fQR6w7eUrzNVnm5ndXzhTUcIawycG3T
haVry+xPMIRlLCIg+dkrwwNcTW1y/X3K4SmgnjLLF57lZFn9UJc=
=Aj6p
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Some SEV and CC platform helpers cleanup and simplifications now that
the usage patterns are becoming apparent
[ I'm sure I'm the only one that has gets confused by all the TLAs, but
in case there are others: here SEV is AMD's "Secure Encrypted
Virtualization" and CC is generic "Confidential Computing".
There's also Intel SGX (Software Guard Extensions) and TDX (Trust
Domain Extensions), along with all the vendor memory encryption
extensions (SME, TSME, TME, and WTF).
And then we have arm64 with RMA and CCA, and I probably forgot another
dozen or so related acronyms - Linus ]
* tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Get rid of accessor functions
x86/sev: Get rid of special sev_es_enable_key
x86/coco: Mark cc_platform_has() and descendants noinstr
mechanism in order to look up the memory type of a region easily. Also
address memory range lookup issues like returning an invalid memory
type. Furthermore, this handles the decoupling of PAT from MTRR more
naturally. All work by Juergen Gross
-----BEGIN PGP SIGNATURE-----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=Dmx5
-----END PGP SIGNATURE-----
Merge tag 'x86_mtrr_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mtrr updates from Borislav Petkov:
"A serious scrubbing of the MTRR code including adding a new map
mechanism in order to look up the memory type of a region easily.
Also address memory range lookup issues like returning an invalid
memory type. Furthermore, this handles the decoupling of PAT from MTRR
more naturally.
All work by Juergen Gross"
* tag 'x86_mtrr_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Set default memory type for PV guests to WB
x86/mtrr: Unify debugging printing
x86/mtrr: Remove unused code
x86/mm: Only check uniform after calling mtrr_type_lookup()
x86/mtrr: Don't let mtrr_type_lookup() return MTRR_TYPE_INVALID
x86/mtrr: Use new cache_map in mtrr_type_lookup()
x86/mtrr: Add mtrr=debug command line option
x86/mtrr: Construct a memory map with cache modes
x86/mtrr: Add get_effective_type() service function
x86/mtrr: Allocate mtrr_value array dynamically
x86/mtrr: Move 32-bit code from mtrr.c to legacy.c
x86/mtrr: Have only one set_mtrr() variant
x86/mtrr: Replace vendor tests in MTRR code
x86/xen: Set MTRR state when running as Xen PV initial domain
x86/hyperv: Set MTRR state when running as SEV-SNP Hyper-V guest
x86/mtrr: Support setting MTRR state for software defined MTRRs
x86/mtrr: Replace size_or_mask and size_and_mask with a much easier concept
x86/mtrr: Remove physical address size calculation
These commits
a494aef23d ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba42168 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")
update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.
When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.
When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.
Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.
Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In order to avoid mappings using the UC- cache attribute, set the
MTRR state to use WB caching as the default.
This is needed in order to cope with the fact that PAT is enabled,
while MTRRs are not supported by the hypervisor.
Fixes: 90b926e68f ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-5-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
Virtual Trust Levels (VTL) helps enable Hyper-V Virtual Secure Mode (VSM)
feature. VSM is a set of hypervisor capabilities and enlightenments
offered to host and guest partitions which enable the creation and
management of new security boundaries within operating system software.
VSM achieves and maintains isolation through VTLs.
Add early initialization for Virtual Trust Levels (VTL). This includes
initializing the x86 platform for VTL and enabling boot support for
secondary CPUs to start in targeted VTL context. For now, only enable
the code for targeted VTL level as 2.
When starting an AP at a VTL other than VTL0, the AP must start directly
in 64-bit mode, bypassing the usual 16-bit -> 32-bit -> 64-bit mode
transition sequence that occurs after waking up an AP with SIPI whose
vector points to the 16-bit AP startup trampoline code.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Link: https://lore.kernel.org/r/1681192532-15460-6-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In the case where page tables are not freed, native_flush_tlb_multi()
does not do a remote TLB flush on CPUs in lazy TLB mode because the
CPU will flush itself at the next context switch. By comparison, the
Hyper-V enlightened TLB flush does not exclude CPUs in lazy TLB mode
and so performs unnecessary flushes.
If we're not freeing page tables, add logic to test for lazy TLB
mode when adding CPUs to the input argument to the Hyper-V TLB
flush hypercall. Exclude lazy TLB mode CPUs so the behavior
matches native_flush_tlb_multi() and the unnecessary flushes are
avoided. Handle both the <=64 vCPU case and the _ex case for >64
vCPUs.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679922967-26582-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When copying CPUs from a Linux cpumask to a Hyper-V VPset,
cpumask_to_vpset() currently has a "_noself" variant that doesn't copy
the current CPU to the VPset. Generalize this variant by replacing it
with a "_skip" variant having a callback function that is invoked for
each CPU to decide if that CPU should be copied. Update the one caller
of cpumask_to_vpset_noself() to use the new "_skip" variant instead.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679922967-26582-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With the vTOM bit now treated as a protection flag and not part of
the physical address, avoid remapping physical addresses with vTOM set
since technically such addresses aren't valid. Use ioremap_cache()
instead of memremap() to ensure that the mapping provides decrypted
access, which will correctly set the vTOM bit as a protection flag.
While this change is not required for correctness with the current
implementation of memremap(), for general code hygiene it's better to
not depend on the mapping functions doing something reasonable with
a physical address that is out-of-range.
While here, fix typos in two error messages.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-12-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove the code to create and manage the second
mapping for the pre-allocated send and recv buffers. This mapping
is the last user of hv_map_memory()/hv_unmap_memory(), so delete
these functions as well. Finally, hv_map_memory() is the last
user of vmap_pfn() in Hyper-V guest code, so remove the Kconfig
selection of VMAP_PFN.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Annotate the function prototype and definition as noreturn to prevent
objtool warnings like:
vmlinux.o: warning: objtool: hyperv_init+0x55c: unreachable instruction
Also, as per Josh's suggestion, add it to the global_noreturns list.
As a comparison, an objdump output without the annotation:
[...]
1b63: mov $0x1,%esi
1b68: xor %edi,%edi
1b6a: callq ffffffff8102f680 <hv_ghcb_terminate>
1b6f: jmpq ffffffff82f217ec <hyperv_init+0x9c> # unreachable
1b74: cmpq $0xffffffffffffffff,-0x702a24(%rip)
[...]
Now, after adding the __noreturn to the function prototype:
[...]
17df: callq ffffffff8102f6d0 <hv_ghcb_negotiate_protocol>
17e4: test %al,%al
17e6: je ffffffff82f21bb9 <hyperv_init+0x469>
[...] <many insns>
1bb9: mov $0x1,%esi
1bbe: xor %edi,%edi
1bc0: callq ffffffff8102f680 <hv_ghcb_terminate>
1bc5: nopw %cs:0x0(%rax,%rax,1) # end of function
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/32453a703dfcf0d007b473c9acbf70718222b74b.1681342859.git.jpoimboe@kernel.org
Hyper-V guests on AMD SEV-SNP hardware have the option of using the
"virtual Top Of Memory" (vTOM) feature specified by the SEV-SNP
architecture. With vTOM, shared vs. private memory accesses are
controlled by splitting the guest physical address space into two
halves.
vTOM is the dividing line where the uppermost bit of the physical
address space is set; e.g., with 47 bits of guest physical address
space, vTOM is 0x400000000000 (bit 46 is set). Guest physical memory is
accessible at two parallel physical addresses -- one below vTOM and one
above vTOM. Accesses below vTOM are private (encrypted) while accesses
above vTOM are shared (decrypted). In this sense, vTOM is like the
GPA.SHARED bit in Intel TDX.
Support for Hyper-V guests using vTOM was added to the Linux kernel in
two patch sets[1][2]. This support treats the vTOM bit as part of
the physical address. For accessing shared (decrypted) memory, these
patch sets create a second kernel virtual mapping that maps to physical
addresses above vTOM.
A better approach is to treat the vTOM bit as a protection flag, not
as part of the physical address. This new approach is like the approach
for the GPA.SHARED bit in Intel TDX. Rather than creating a second kernel
virtual mapping, the existing mapping is updated using recently added
coco mechanisms.
When memory is changed between private and shared using
set_memory_decrypted() and set_memory_encrypted(), the PTEs for the
existing kernel mapping are changed to add or remove the vTOM bit in the
guest physical address, just as with TDX. The hypercalls to change the
memory status on the host side are made using the existing callback
mechanism. Everything just works, with a minor tweak to map the IO-APIC
to use private accesses.
To accomplish the switch in approach, the following must be done:
* Update Hyper-V initialization to set the cc_mask based on vTOM
and do other coco initialization.
* Update physical_mask so the vTOM bit is no longer treated as part
of the physical address
* Remove CC_VENDOR_HYPERV and merge the associated vTOM functionality
under CC_VENDOR_AMD. Update cc_mkenc() and cc_mkdec() to set/clear
the vTOM bit as a protection flag.
* Code already exists to make hypercalls to inform Hyper-V about pages
changing between shared and private. Update this code to run as a
callback from __set_memory_enc_pgtable().
* Remove the Hyper-V special case from __set_memory_enc_dec()
* Remove the Hyper-V specific call to swiotlb_update_mem_attributes()
since mem_encrypt_init() will now do it.
* Add a Hyper-V specific implementation of the is_private_mmio()
callback that returns true for the IO-APIC and vTPM MMIO addresses
[1] https://lore.kernel.org/all/20211025122116.264793-1-ltykernel@gmail.com/
[2] https://lore.kernel.org/all/20211213071407.314309-1-ltykernel@gmail.com/
[ bp: Touchups. ]
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-7-git-send-email-mikelley@microsoft.com
Update vmap_pfn() calls to explicitly request that the mapping
be for decrypted access to the memory. There's no change in
functionality since the PFNs passed to vmap_pfn() are above the
shared_gpa_boundary, implicitly producing a decrypted mapping.
But explicitly requesting "decrypted" allows the code to work
before and after changes that cause vmap_pfn() to mask the
PFNs to being below the shared_gpa_boundary.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-4-git-send-email-mikelley@microsoft.com
Hyper-V cleanup code comes under panic path where preemption and irq
is already disabled. So calling of unregister_syscore_ops might schedule
out the thread even for the case where mutex lock is free.
hyperv_cleanup
unregister_syscore_ops
mutex_lock(&syscore_ops_lock)
might_sleep
Here might_sleep might schedule out this thread, where voluntary preemption
config is on and this thread will never comes back. And also this was added
earlier to maintain the symmetry which is not required as this can comes
during crash shutdown path only.
To prevent the same, removing unregister_syscore_ops function call.
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1669443291-2575-1-git-send-email-gauravkohli@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Commit e5d9b714fe ("x86/hyperv: fix root partition faults when writing
to VP assist page MSR") moved 'wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE)' under
'if (*hvp)' condition. This works for root partition as hv_cpu_die()
does memunmap() and sets 'hv_vp_assist_page[cpu]' to NULL but breaks
non-root partitions as hv_cpu_die() doesn't free 'hv_vp_assist_page[cpu]'
for them. This causes VP assist page to remain unset after CPU
offline/online cycle:
$ rdmsr -p 24 0x40000073
10212f001
$ echo 0 > /sys/devices/system/cpu/cpu24/online
$ echo 1 > /sys/devices/system/cpu/cpu24/online
$ rdmsr -p 24 0x40000073
0
Fix the issue by always writing to HV_X64_MSR_VP_ASSIST_PAGE in
hv_cpu_init(). Note, checking 'if (!*hvp)', for root partition is
pointless as hv_cpu_die() always sets 'hv_vp_assist_page[cpu]' to
NULL (and it's also NULL initially).
Note: the fact that 'hv_vp_assist_page[cpu]' is reset to NULL may
present a (potential) issue for KVM. While Hyper-V uses
CPUHP_AP_ONLINE_DYN stage in CPU hotplug, KVM uses CPUHP_AP_KVM_STARTING
which comes earlier in CPU teardown sequence. It is theoretically
possible that Enlightened VMCS is still in use. It is unclear if the
issue is real and if using KVM with Hyper-V root partition is even
possible.
While on it, drop the unneeded smp_processor_id() call from hv_cpu_init().
Fixes: e5d9b714fe ("x86/hyperv: fix root partition faults when writing to VP assist page MSR")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221103190601.399343-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hyperv_cleanup resets the hypercall page by setting the MSR to 0. However,
the root partition is not allowed to write to the GPA bits of the MSR.
Instead, it uses the hypercall page provided by the MSR. Similar is the
case with the reference TSC MSR.
Clear only the enable bit instead of zeroing the entire MSR to make
the code valid for root partition too.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-3-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The commit 154fb14df7 ("x86/hyperv: Replace kmap() with
kmap_local_page()") keeps the BUG_ON() to check if kmap_local_page()
fails.
But in fact, kmap_local_page() always returns a valid kernel address
and won't return NULL here. It will BUG on its own if it fails. [1]
So directly use memcpy_to_page() which creates local mapping to copy.
[1]: https://lore.kernel.org/lkml/YztFEyUA48et0yTt@iweiny-mobl/
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20221020083820.2341088-1-zhao1.liu@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
kmap() is being deprecated in favor of kmap_local_page()[1].
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
In the fuction hyperv_init() of hyperv/hv_init.c, the mapping is used in a
single thread and is short live. So, in this case, it's safe to simply use
kmap_local_page() to create mapping, and this avoids the wasted cost of
kmap() for global synchronization.
In addtion, the fuction hyperv_init() checks if kmap() fails by BUG_ON().
From the original discussion[2], the BUG_ON() here is just used to
explicitly panic NULL pointer. So still keep the BUG_ON() in place to check
if kmap_local_page() fails. Based on this consideration, memcpy_to_page()
is not selected here but only kmap_local_page() is used.
Therefore, replace kmap() with kmap_local_page() in hyperv/hv_init.c.
[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com
[2]: https://lore.kernel.org/lkml/20200915103710.cqmdvzh5lys4wsqo@liuwe-devbox-debian-v2/
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20220928095640.626350-1-zhao1.liu@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The generate_guest_id function is more suitable for use after the
following modifications.
1. The return value of the function is modified to u64.
2. Remove the d_info1 and d_info2 parameters from the function, keep the
u64 type kernel_version parameter.
3. Rename the function to make it clearly a Hyper-V related function,
and modify it to hv_generate_guest_id.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220928064046.3545-1-kunyu@nfschina.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
Now that the irq_data_update_affinity helper exists, enforce its use
by returning a a const cpumask from irq_data_get_affinity_mask.
Since the previous commit already updated places that needed to call
irq_data_update_affinity, this commit updates the remaining code that
either did not modify the cpumask or immediately passed the modified
mask to irq_set_affinity.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-8-samuel@sholland.org
Hyper-V Isolation VM current code uses sev_es_ghcb_hv_call()
to read/write MSR via GHCB page and depends on the sev code.
This may cause regression when sev code changes interface
design.
The latest SEV-ES code requires to negotiate GHCB version before
reading/writing MSR via GHCB page and sev_es_ghcb_hv_call() doesn't
work for Hyper-V Isolation VM. Add Hyper-V ghcb related implementation
to decouple SEV and Hyper-V code. Negotiate GHCB version in the
hyperv_init() and use the version to communicate with Hyper-V
in the ghcb hv call function.
Fixes: 2ea29c5abb ("x86/sev: Save the negotiated GHCB version")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmHhw7oTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXrjSB/979LV4Dn1PMcFYsSdlFEMeHcjzJdw/
kFnLPXMaPJyfg6QPuf83jxzw9uxw8fcePMdVq/FFBtmVV9fJMAv62B8jaGS1p58c
WnAg+7zsTN+xEoJn+tskSSon8BNMWVrl41zP3K4Ged+5j8UEBk62GB8Orz1qkpwL
fTh3/+xAvczJeD4zZb1dAm4WnmcQJ4vhg45p07jX6owvnwQAikMFl45aSW54I5o8
vAxGzFgdsZ2NtExnRNKh3b3DozA8JUE89KckBSZnDtq4rH8Fyy6Wij56Hc6v6Cml
SUohiNbHX7hsNwit/lxL8wuF97IiA0pQSABobEg3rxfTghTUep51LlaN
=/m4A
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- More patches for Hyper-V isolation VM support (Tianyu Lan)
- Bug fixes and clean-up patches from various people
* tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
scsi: storvsc: Fix storvsc_queuecommand() memory leak
x86/hyperv: Properly deal with empty cpumasks in hyperv_flush_tlb_multi()
Drivers: hv: vmbus: Initialize request offers message for Isolation VM
scsi: storvsc: Fix unsigned comparison to zero
swiotlb: Add CONFIG_HAS_IOMEM check around swiotlb_mem_remap()
x86/hyperv: Fix definition of hv_ghcb_pg variable
Drivers: hv: Fix definition of hypercall input & output arg variables
net: netvsc: Add Isolation VM support for netvsc driver
scsi: storvsc: Add Isolation VM support for storvsc driver
hyper-v: Enable swiotlb bounce buffer for Isolation VM
x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
swiotlb: Add swiotlb bounce buffer remap function for HV IVM
KASAN detected the following issue:
BUG: KASAN: slab-out-of-bounds in hyperv_flush_tlb_multi+0xf88/0x1060
Read of size 4 at addr ffff8880011ccbc0 by task kcompactd0/33
CPU: 1 PID: 33 Comm: kcompactd0 Not tainted 5.14.0-39.el9.x86_64+debug #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine,
BIOS Hyper-V UEFI Release v4.0 12/17/2019
Call Trace:
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x140
? hyperv_flush_tlb_multi+0xf88/0x1060
__kasan_report.cold+0x7f/0x11e
? hyperv_flush_tlb_multi+0xf88/0x1060
kasan_report+0x38/0x50
hyperv_flush_tlb_multi+0xf88/0x1060
flush_tlb_mm_range+0x1b1/0x200
ptep_clear_flush+0x10e/0x150
...
Allocated by task 0:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
hv_common_init+0xae/0x115
hyperv_init+0x97/0x501
apic_intr_mode_init+0xb3/0x1e0
x86_late_time_init+0x92/0xa2
start_kernel+0x338/0x3eb
secondary_startup_64_no_verify+0xc2/0xcb
The buggy address belongs to the object at ffff8880011cc800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 960 bytes inside of
1024-byte region [ffff8880011cc800, ffff8880011ccc00)
'hyperv_flush_tlb_multi+0xf88/0x1060' points to
hv_cpu_number_to_vp_number() and '960 bytes' means we're trying to get
VP_INDEX for CPU#240. 'nr_cpus' here is exactly 240 so we're trying to
access past hv_vp_index's last element. This can (and will) happen
when 'cpus' mask is empty and cpumask_last() will return '>=nr_cpus'.
Commit ad0a6bad44 ("x86/hyperv: check cpu mask after interrupt has
been disabled") tried to deal with empty cpumask situation but
apparently didn't fully fix the issue.
'cpus' cpumask which is passed to hyperv_flush_tlb_multi() is
'mm_cpumask(mm)' (which is '&mm->cpu_bitmap'). This mask changes every
time the particular mm is scheduled/unscheduled on some CPU (see
switch_mm_irqs_off()), disabling IRQs on the CPU which is performing remote
TLB flush has zero influence on whether the particular process can get
scheduled/unscheduled on _other_ CPUs so e.g. in the case where the mm was
scheduled on one other CPU and got unscheduled during
hyperv_flush_tlb_multi()'s execution will lead to cpumask becoming empty.
It doesn't seem that there's a good way to protect 'mm_cpumask(mm)'
from changing during hyperv_flush_tlb_multi()'s execution. It would be
possible to copy it in the very beginning of the function but this is a
waste. It seems we can deal with changing cpumask just fine.
When 'cpus' cpumask changes during hyperv_flush_tlb_multi()'s
execution, there are two possible issues:
- 'Under-flushing': we will not flush TLB on a CPU which got added to
the mask while hyperv_flush_tlb_multi() was already running. This is
not a problem as this is equal to mm getting scheduled on that CPU
right after TLB flush.
- 'Over-flushing': we may flush TLB on a CPU which is already cleared
from the mask. First, extra TLB flush preserves correctness. Second,
Hyper-V's TLB flush hypercall takes 'mm->pgd' argument so Hyper-V may
avoid the flush if CR3 doesn't match.
Fix the immediate issue with cpumask_last()/hv_cpu_number_to_vp_number()
and remove the pointless cpumask_empty() check from the beginning of the
function as it really doesn't protect anything. Also, avoid the hypercall
altogether when 'flush->processor_mask' ends up being empty.
Fixes: ad0a6bad44 ("x86/hyperv: check cpu mask after interrupt has been disabled")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220106094611.1404218-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The percpu variable hv_ghcb_pg is incorrectly defined. The __percpu
qualifier should be associated with the union hv_ghcb * (i.e.,
a pointer), not with the target of the pointer. This distinction
makes no difference to gcc and the generated code, but sparse
correctly complains. Fix the definition in the interest of
general correctness in addition to making sparse happy.
No functional change.
Fixes: 0cc4f6d9f0 ("x86/hyperv: Initialize GHCB page in Isolation VM")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1640662315-22260-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In Isolation VM, all shared memory with host needs to mark visible
to host via hvcall. vmbus_establish_gpadl() has already done it for
netvsc rx/tx ring buffer. The page buffer used by vmbus_sendpacket_
pagebuffer() stills need to be handled. Use DMA API to map/umap
these memory during sending/receiving packet and Hyper-V swiotlb
bounce buffer dma address will be returned. The swiotlb bounce buffer
has been masked to be visible to host during boot up.
rx/tx ring buffer is allocated via vzalloc() and they need to be
mapped into unencrypted address space(above vTOM) before sharing
with host and accessing. Add hv_map/unmap_memory() to map/umap rx
/tx ring buffer.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-6-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hyperv Isolation VM requires bounce buffer support to copy
data from/to encrypted memory and so enable swiotlb force
mode to use swiotlb bounce buffer for DMA transaction.
In Isolation VM with AMD SEV, the bounce buffer needs to be
accessed via extra address space which is above shared_gpa_boundary
(E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
The access physical address will be original physical address +
shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
spec is called virtual top of memory(vTOM). Memory addresses below
vTOM are automatically treated as private while memory above
vTOM is treated as shared.
Swiotlb bounce buffer code calls set_memory_decrypted()
to mark bounce buffer visible to host and map it in extra
address space via memremap. Populate the shared_gpa_boundary
(vTOM) via swiotlb_unencrypted_base variable.
The map function memremap() can't work in the early place
(e.g ms_hyperv_init_platform()) and so call swiotlb_update_mem_
attributes() in the hyperv_init().
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-4-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
No point in looking up things over and over. Just look up the associated
irq data and work from there.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20211206210224.429625690@linutronix.de
Explicitly check for MSR_HYPERCALL and MSR_VP_INDEX support when probing
for running as a Hyper-V guest instead of waiting until hyperv_init() to
detect the bogus configuration. Add messages to give the admin a heads
up that they are likely running on a broken virtual machine setup.
At best, silently disabling Hyper-V is confusing and difficult to debug,
e.g. the kernel _says_ it's using all these fancy Hyper-V features, but
always falls back to the native versions. At worst, the half baked setup
will crash/hang the kernel.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20211104182239.1302956-3-seanjc@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The following issue is observed with CONFIG_DEBUG_PREEMPT when KVM loads:
KVM: vmx: using Hyper-V Enlightened VMCS
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/488
caller is set_hv_tscchange_cb+0x16/0x80
CPU: 1 PID: 488 Comm: systemd-udevd Not tainted 5.15.0-rc5+ #396
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
Call Trace:
dump_stack_lvl+0x6a/0x9a
check_preemption_disabled+0xde/0xe0
? kvm_gen_update_masterclock+0xd0/0xd0 [kvm]
set_hv_tscchange_cb+0x16/0x80
kvm_arch_init+0x23f/0x290 [kvm]
kvm_init+0x30/0x310 [kvm]
vmx_init+0xaf/0x134 [kvm_intel]
...
set_hv_tscchange_cb() can get preempted in between acquiring
smp_processor_id() and writing to HV_X64_MSR_REENLIGHTENMENT_CONTROL. This
is not an issue by itself: HV_X64_MSR_REENLIGHTENMENT_CONTROL is a
partition-wide MSR and it doesn't matter which particular CPU will be
used to receive reenlightenment notifications. The only real problem can
(in theory) be observed if the CPU whose id was acquired with
smp_processor_id() goes offline before we manage to write to the MSR,
the logic in hv_cpu_die() won't be able to reassign it correctly.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211012155005.1613352-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Clean up the following includecheck warning:
./arch/x86/hyperv/ivm.c: linux/bitfield.h is included more than once.
./arch/x86/hyperv/ivm.c: linux/types.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1635325022-99889-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Fix following checkinclude.pl warning:
./arch/x86/hyperv/hv_init.c: linux/io.h is included more than once.
The include is in line 13. Remove the duplicated here.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211026113249.30481-1-wanjiabing@vivo.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hyperv provides ghcb hvcall to handle VMBus
HVCALL_SIGNAL_EVENT and HVCALL_POST_MESSAGE
msg in SNP Isolation VM. Add such support.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-8-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyperv provides GHCB protocol to write Synthetic Interrupt
Controller MSR registers in Isolation VM with AMD SEV SNP
and these registers are emulated by hypervisor directly.
Hyperv requires to write SINTx MSR registers twice. First
writes MSR via GHCB page to communicate with hypervisor
and then writes wrmsr instruction to talk with paravisor
which runs in VMPL0. Guest OS ID MSR also needs to be set
via GHCB page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-7-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Add new hvcall guest address host visibility support to mark
memory visible to host. Call it inside set_memory_decrypted
/encrypted(). Add HYPERVISOR feature check in the
hv_is_isolation_supported() to optimize in non-virtualization
environment.
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-4-ltykernel@gmail.com
[ wei: fix conflicts with tip ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyperv exposes GHCB page via SEV ES GHCB MSR for SNP guest
to communicate with hypervisor. Map GHCB page for all
cpus to read/write MSR register and submit hvcall request
via ghcb page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-2-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmFeykwTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhRLCADXOOSGKk4L1vWssRRhLmMXI45ElocY
EbZ/mXcQhxKnlVhdMNnupGjz+lU5FQGkCCWlhmt9Ml2O6R+lDx+zIUS8BK3Nkom9
twWjueMtum6yFwDMGYALhptVLjDqVFG71QcW0incghpnAx4s2FVE8h38md5MuUFY
Kqqf/dRkppSePldHFrRG/e4c6r0WyTsJ6Z9LTU0UYp5GqJcmUJlx7TxxqzGk5Fti
GpQ5cFS7JX8xHAkRROk/dvwJte1RRnBAW6lIWxwAaDJ6Gbg7mNfOQe7n+/KRO7ZG
gC5hbkP9tMv2nthLxaFbpu791U4lMZ2WiTLZvbgCseO3FCmToXWZ6TDd
=1mdq
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Replace uuid.h with types.h in a header (Andy Shevchenko)
- Avoid sleeping in atomic context in PCI driver (Long Li)
- Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov)
* tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Avoid erroneously sending IPI to 'self'
hyper-v: Replace uuid.h with types.h
PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
__send_ipi_mask_ex() uses an optimization: when the target CPU mask is
equal to 'cpu_present_mask' it uses 'HV_GENERIC_SET_ALL' format to avoid
converting the specified cpumask to VP_SET. This case was overlooked when
'exclude_self' parameter was added. As the result, a spurious IPI to
'self' can be send.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: dfb5c1e12c ("x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211006125016.941616-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
It is not a good practice to allocate a cpumask on stack, given it may
consume up to 1 kilobytes of stack space if the kernel is configured to
have 8192 cpus.
The internal helper functions __send_ipi_mask{,_ex} need to loop over
the provided mask anyway, so it is not too difficult to skip `self'
there. We can thus do away with the on-stack cpumask in
hv_send_ipi_mask_allbutself.
Adjust call sites of __send_ipi_mask as needed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 68bb7bfb79 ("X86/Hyper-V: Enable IPI enlightenments")
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210910185714.299411-3-wei.liu@kernel.org
For root partition the VP assist pages are pre-determined by the
hypervisor. The root kernel is not allowed to change them to
different locations. And thus, we are getting below stack as in
current implementation root is trying to perform write to specific
MSR.
[ 2.778197] unchecked MSR access error: WRMSR to 0x40000073 (tried to write 0x0000000145ac5001) at rIP: 0xffffffff810c1084 (native_write_msr+0x4/0x30)
[ 2.784867] Call Trace:
[ 2.791507] hv_cpu_init+0xf1/0x1c0
[ 2.798144] ? hyperv_report_panic+0xd0/0xd0
[ 2.804806] cpuhp_invoke_callback+0x11a/0x440
[ 2.811465] ? hv_resume+0x90/0x90
[ 2.818137] cpuhp_issue_call+0x126/0x130
[ 2.824782] __cpuhp_setup_state_cpuslocked+0x102/0x2b0
[ 2.831427] ? hyperv_report_panic+0xd0/0xd0
[ 2.838075] ? hyperv_report_panic+0xd0/0xd0
[ 2.844723] ? hv_resume+0x90/0x90
[ 2.851375] __cpuhp_setup_state+0x3d/0x90
[ 2.858030] hyperv_init+0x14e/0x410
[ 2.864689] ? enable_IR_x2apic+0x190/0x1a0
[ 2.871349] apic_intr_mode_init+0x8b/0x100
[ 2.878017] x86_late_time_init+0x20/0x30
[ 2.884675] start_kernel+0x459/0x4fb
[ 2.891329] secondary_startup_64_no_verify+0xb0/0xbb
Since the hypervisor already provides the VP assist pages for root
partition, we need to memremap the memory from hypervisor for root
kernel to use. The mapping is done in hv_cpu_init during bringup and is
unmapped in hv_cpu_die during teardown.
Signed-off-by: Praveen Kumar <kumarpraveen@linux.microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Link: https://lore.kernel.org/r/20210731120519.17154-1-kumarpraveen@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The check for whether hibernation is possible, and the enabling of
Hyper-V panic notification during kexec, are both architecture neutral.
Move the code from under arch/x86 and into drivers/hv/hv_common.c where
it can also be used for ARM64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-4-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Architecture independent Hyper-V code calls various arch-specific handlers
when needed. To aid in supporting multiple architectures, provide weak
defaults that can be overridden by arch-specific implementations where
appropriate. But when arch-specific overrides aren't needed or haven't
been implemented yet for a particular architecture, these stubs reduce
the amount of clutter under arch/.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The code to allocate and initialize the hv_vp_index array is
architecture neutral. Similarly, the code to allocate and
populate the hypercall input and output arg pages is architecture
neutral. Move both sets of code out from arch/x86 and into
utility functions in drivers/hv/hv_common.c that can be shared
by Hyper-V initialization on ARM64.
No functional changes. However, the allocation of the hypercall
input and output arg pages is done differently so that the
size is always the Hyper-V page size, even if not the same as
the guest page size (such as with ARM64's 64K page size).
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The extended capability query code is currently under arch/x86, but it
is architecture neutral, and is used by arch neutral code in the Hyper-V
balloon driver. Hence the balloon driver fails to build on other
architectures.
Fix by moving the ext cap code out from arch/x86. Because it is also
called from built-in architecture specific code, it can't be in a module,
so the Makefile treats as built-in even when CONFIG_HYPERV is "m". Also
drivers/Makefile is tweaked because this is the first occurrence of a
Hyper-V file that is built-in even when CONFIG_HYPERV is "m".
While here, update the hypercall status check to use the new helper
function instead of open coding. No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Link: https://lore.kernel.org/r/1622669804-2016-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Implement concurrent TLB flushes, which overlaps the local TLB flush with the
remote TLB flush. In testing this improved sysbench performance measurably by
a couple of percentage points, especially if TLB-heavy security mitigations
are active.
- Further micro-optimizations to improve the performance of TLB flushes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3Cyp
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tlb updates from Ingo Molnar:
"The x86 MM changes in this cycle were:
- Implement concurrent TLB flushes, which overlaps the local TLB
flush with the remote TLB flush.
In testing this improved sysbench performance measurably by a
couple of percentage points, especially if TLB-heavy security
mitigations are active.
- Further micro-optimizations to improve the performance of TLB
flushes"
* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Micro-optimize smp_call_function_many_cond()
smp: Inline on_each_cpu_cond() and on_each_cpu()
x86/mm/tlb: Remove unnecessary uses of the inline keyword
cpumask: Mark functions as pure
x86/mm/tlb: Do not make is_lazy dirty for no reason
x86/mm/tlb: Privatize cpu_tlbstate
x86/mm/tlb: Flush remote and local TLBs concurrently
x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
smp: Run functions concurrently in smp_call_function_many_cond()
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Linux has support for free page reporting now (36e66c554b) for
virtualized environment. On Hyper-V when virtually backed VMs are
configured, Hyper-V will advertise cold memory discard capability,
when supported. This patch adds the support to hook into the free
page reporting infrastructure and leverage the Hyper-V cold memory
discard hint hypercall to report/free these pages back to the host.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Tested-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/SN4PR2101MB0880121FA4E2FEC67F35C1DCC0649@SN4PR2101MB0880.namprd21.prod.outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Fixes the following W=1 kernel build warning(s):
arch/x86/hyperv/hv_apic.c:58:15: warning: variable ‘hi’ set but not used [-Wunused-but-set-variable]
Compiled with CONFIG_HYPERV enabled:
make allmodconfig ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-
make W=1 arch/x86/hyperv/hv_apic.o ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-
HV_X64_MSR_EOI occupies bit 31:0 and HV_X64_MSR_TPR occupies bit 7:0,
which means the higher 32 bits are not really used. Cast the variable hi
to void to silence this warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Yihang <xuyihang@huawei.com>
Link: https://lore.kernel.org/r/20210323025013.191533-1-xuyihang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Fixes the following W=1 kernel build warning(s):
arch/x86/hyperv/hv_spinlock.c:28:16: warning: variable ‘msr_val’ set but not used [-Wunused-but-set-variable]
unsigned long msr_val;
As Hypervisor Top-Level Functional Specification states in chapter 7.5
Virtual Processor Idle Sleep State, "A partition which possesses the
AccessGuestIdleMsr privilege (refer to section 4.2.2) may trigger entry
into the virtual processor idle sleep state through a read to the
hypervisor-defined MSR HV_X64_MSR_GUEST_IDLE".
That means only a read of the MSR is necessary. The returned value
msr_val is not used. Cast it to void to silence this warning.
Reference:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Yihang <xuyihang@huawei.com>
Link: https://lore.kernel.org/r/20210323024302.174434-1-xuyihang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
STIMER0 interrupts are most naturally modeled as per-cpu IRQs. But
because x86/x64 doesn't have per-cpu IRQs, the core STIMER0 interrupt
handling machinery is done in code under arch/x86 and Linux IRQs are
not used. Adding support for ARM64 means adding equivalent code
using per-cpu IRQs under arch/arm64.
A better model is to treat per-cpu IRQs as the normal path (which it is
for modern architectures), and the x86/x64 path as the exception. Do this
by incorporating standard Linux per-cpu IRQ allocation into the main
SITMER0 driver code, and bypass it in the x86/x64 exception case. For
x86/x64, special case code is retained under arch/x86, but no STIMER0
interrupt handling code is needed under arch/arm64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1614721102-2241-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With the new Hyper-V MSR set function, hyperv_report_panic_msg() can be
architecture neutral, so move it out from under arch/x86 and merge into
hv_kmsg_dump(). This move also avoids needing a separate implementation
under arch/arm64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-5-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Current code defines a separate get and set macro for each Hyper-V
synthetic MSR used by the VMbus driver. Furthermore, the get macro
can't be converted to a standard function because the second argument
is modified in place, which is somewhat bad form.
Redo this by providing a single get and a single set function that
take a parameter specifying the MSR to be operated on. Fixup usage
of the get function. Calling locations are no more complex than before,
but the code under arch/x86 and the upcoming code under arch/arm64
is significantly simplified.
Also standardize the names of Hyper-V synthetic MSRs that are
architecture neutral. But keep the old x86-specific names as aliases
that can be removed later when all references (particularly in KVM
code) have been cleaned up in a separate patch series.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-4-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The Hyper-V page allocator functions are implemented in an architecture
neutral way. Move them into the architecture neutral VMbus module so
a separate implementation for ARM64 is not needed.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
To improve TLB shootdown performance, flush the remote and local TLBs
concurrently. Introduce flush_tlb_multi() that does so. Introduce
paravirtual versions of flush_tlb_multi() for KVM, Xen and hyper-v (Xen
and hyper-v are only compile-tested).
While the updated smp infrastructure is capable of running a function on
a single local core, it is not optimized for this case. The multiple
function calls and the indirect branch introduce some overhead, and
might make local TLB flushes slower than they were before the recent
changes.
Before calling the SMP infrastructure, check if only a local TLB flush
is needed to restore the lost performance in this common case. This
requires to check mm_cpumask() one more time, but unless this mask is
updated very frequently, this should impact performance negatively.
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com> # Hyper-v parts
Reviewed-by: Juergen Gross <jgross@suse.com> # Xen and paravirt parts
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20210220231712.2475218-5-namit@vmware.com
Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
Hypervisor when Linux runs as the root partition. Implement an IRQ
domain to handle mapping and unmapping of IO-APIC interrupts.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-17-wei.liu@kernel.org
When Linux runs as the root partition on Microsoft Hypervisor, its
interrupts are remapped. Linux will need to explicitly map and unmap
interrupts for hardware.
Implement an MSI domain to issue the correct hypercalls. And initialize
this irq domain as the default MSI irq domain.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-16-wei.liu@kernel.org
They are used to deposit pages into Microsoft Hypervisor and bring up
logical and virtual processors.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-10-wei.liu@kernel.org
When Linux is running as the root partition, the hypercall page will
have already been setup by Hyper-V. Copy the content over to the
allocated page.
Add checks to hv_suspend & co to bail early because they are not
supported in this setup yet.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-8-wei.liu@kernel.org
We will need the partition ID for executing some hypercalls later.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-7-wei.liu@kernel.org
When Linux runs as the root partition, it will need to make hypercalls
which return data from the hypervisor.
Allocate pages for storing results when Linux runs as the root
partition.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-6-wei.liu@kernel.org
If bit 22 of Group B Features is set, the guest has access to the
Isolation Configuration CPUID leaf. On x86, the first four bits
of EAX in this leaf provide the isolation type of the partition;
we entail three isolation types: 'SNP' (hardware-based isolation),
'VBS' (software-based isolation), and 'NONE' (no isolation).
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: x86@kernel.org
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20210201144814.2701-2-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With commit 4df4cb9e99, the Hyper-V direct-mode STIMER is actually
initialized before LAPIC is initialized: see
apic_intr_mode_init()
x86_platform.apic_post_init()
hyperv_init()
hv_stimer_alloc()
apic_bsp_setup()
setup_local_APIC()
setup_local_APIC() temporarily disables LAPIC, initializes it and
re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's
registered, it can be programmed immediately and the timer can fire
very soon:
hv_stimer_init
clockevents_config_and_register
clockevents_register_device
tick_check_new_device
tick_setup_device
tick_setup_periodic(), tick_setup_oneshot()
clockevents_program_event
When the timer fires in the hypervisor, if the LAPIC is in the
disabled state, new versions of Hyper-V ignore the event and don't inject
the timer interrupt into the VM, and hence the VM hangs when it boots.
Note: when the VM starts/reboots, the LAPIC is pre-enabled by the
firmware, so the window of LAPIC being temporarily disabled is pretty
small, and the issue can only happen once out of 100~200 reboots for
a 40-vCPU VM on one dev host, and on another host the issue doesn't
reproduce after 2000 reboots.
The issue is more noticeable for kdump/kexec, because the LAPIC is
disabled by the first kernel, and stays disabled until the kdump/kexec
kernel enables it. This is especially an issue to a Generation-2 VM
(for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000
(rather than CONFIG_HZ=250) is used.
Fix the issue by moving hv_stimer_alloc() to a later place where the
LAPIC timer is initialized.
Fixes: 4df4cb9e99 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210116223136.13892-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
We've observed crashes due to an empty cpu mask in
hyperv_flush_tlb_others. Obviously the cpu mask in question is changed
between the cpumask_empty call at the beginning of the function and when
it is actually used later.
One theory is that an interrupt comes in between and a code path ends up
changing the mask. Move the check after interrupt has been disabled to
see if it fixes the issue.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210105175043.28325-1-wei.liu@kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Currently the kexec kernel can panic or hang due to 2 causes:
1) hv_cpu_die() is not called upon kexec, so the hypervisor corrupts the
old VP Assist Pages when the kexec kernel runs. The same issue is fixed
for hibernation in commit 421f090c81 ("x86/hyperv: Suspend/resume the
VP assist page for hibernation"). Now fix it for kexec.
2) hyperv_cleanup() is called too early. In the kexec path, the other CPUs
are stopped in hv_machine_shutdown() -> native_machine_shutdown(), so
between hv_kexec_handler() and native_machine_shutdown(), the other CPUs
can still try to access the hypercall page and cause panic. The workaround
"hv_hypercall_pg = NULL;" in hyperv_cleanup() is unreliabe. Move
hyperv_cleanup() to a better place.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201222065541.24312-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The comment about Hyper-V accessors is unclear regarding their
potential use in x2apic mode, as is the associated commit message
in e211288b72. Clarify that while the architectural and
synthetic MSRs are equivalent in x2apic mode, the full set of xapic
accessors cannot be used because of register layout differences.
Fixes: e211288b72 ("x86/hyperv: Make vapic support x2apic mode")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1603723972-81303-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
Fix the recently added new __vmalloc_node_range callers to pass the
correct values as the owner for display in /proc/vmallocinfo.
Fixes: 800e26b813 ("x86/hyperv: allocate the hypercall page with only read and execute bits")
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Fixes: 7a0e27b2a0 ("mm: remove vmalloc_exec")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200627075649.2455097-1-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "fix a hyperv W^X violation and remove vmalloc_exec"
Dexuan reported a W^X violation due to the fact that the hyper hypercall
page due switching it to be allocated using vmalloc_exec.
The problem is that PAGE_KERNEL_EXEC as used by vmalloc_exec actually
sets writable permissions in the pte. This series fixes the issue by
switching to the low-level __vmalloc_node_range interface that allows
specifing more detailed permissions instead. It then also open codes
the other two callers and removes the somewhat confusing vmalloc_exec
interface.
Peter noted that the hyper hypercall page allocation also has another
long standing issue in that it shouldn't use the full vmalloc but just
the module space. This issue is so far theoretical as the allocation is
done early in the boot process. I plan to fix it with another bigger
series for 5.9.
This patch (of 3):
Avoid a W^X violation cause by the fact that PAGE_KERNEL_EXEC includes
the writable bit.
For this resurrect the removed PAGE_KERNEL_RX definition, but as
PAGE_KERNEL_ROX to match arm64 and powerpc.
Link: http://lkml.kernel.org/r/20200618064307.32739-2-hch@lst.de
Fixes: 78bb17f76e ("x86/hyperv: use vmalloc_exec for the hypercall page")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert various hypervisor vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
Patch series "decruft the vmalloc API", v2.
Peter noticed that with some dumb luck you can toast the kernel address
space with exported vmalloc symbols.
I used this as an opportunity to decruft the vmalloc.c API and make it
much more systematic. This also removes any chance to create vmalloc
mappings outside the designated areas or using executable permissions
from modules. Besides that it removes more than 300 lines of code.
This patch (of 29):
Use the designated helper for allocating executable kernel memory, and
remove the now unused PAGE_KERNEL_RX define.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lkml.kernel.org/r/20200414131348.444715-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200414131348.444715-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Errors during hibernation with reenlightenment notifications enabled were
reported:
[ 51.730435] PM: hibernation entry
[ 51.737435] PM: Syncing filesystems ...
...
[ 54.102216] Disabling non-boot CPUs ...
[ 54.106633] smpboot: CPU 1 is now offline
[ 54.110006] unchecked MSR access error: WRMSR to 0x40000106 (tried to
write 0x47c72780000100ee) at rIP: 0xffffffff90062f24
native_write_msr+0x4/0x20)
[ 54.110006] Call Trace:
[ 54.110006] hv_cpu_die+0xd9/0xf0
...
Normally, hv_cpu_die() just reassigns reenlightenment notifications to some
other CPU when the CPU receiving them goes offline. Upon hibernation, there
is no other CPU which is still online so cpumask_any_but(cpu_online_mask)
returns >= nr_cpu_ids and using it as hv_vp_index index is incorrect.
Disable the feature when cpumask_any_but() fails.
Also, as we now disable reenlightenment notifications upon hibernation we
need to restore them on resume. Check if hv_reenlightenment_cb was
previously set and restore from hv_resume().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200512160153.134467-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the
resume path, the "new" kernel's VP assist page is not suspended (i.e. not
disabled), and later when we jump to the "old" kernel, the page is not
properly re-enabled for CPU0 with the allocated page from the old kernel.
So far, the VP assist page is used by hv_apic_eoi_write(), and is also
used in the case of nested virtualization (running KVM atop Hyper-V).
For hv_apic_eoi_write(), when the page is not properly re-enabled,
hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written.
This is not ideal with respect to performance, but Hyper-V can still
correctly handle this according to the Hyper-V spec; nevertheless, Linux
still must update the Hyper-V hypervisor with the correct VP assist page
to prevent Hyper-V from writing to the stale page, which causes guest
memory corruption and consequently may have caused the hangs and triple
faults seen during non-boot CPUs resume.
Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops.
Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500.
With the fix, hibernation can pass a long-haul test of 2000 runs.
In the case of nested virtualization, disabling/reenabling the assist
page upon hibernation may be unsafe if there are active L2 guests.
It looks KVM should be enhanced to abort the hibernation request if
there is any active L2 guest.
Fixes: 05bd330a7f ("x86/hyperv: Suspend/resume the hypercall page for hibernation")
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.
Fixes: 7ed4325a44 ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
For hibernation the hypercall page must be disabled before the hibernation
image is created so that subsequent hypercall operations fail safely. On
resume the hypercall page has to be restored and reenabled to ensure proper
operation of the resumed kernel.
Implement the necessary suspend/resume callbacks.
[ tglx: Decrypted changelog ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1578350559-130275-1-git-send-email-decui@microsoft.com
- Hibernation support (Dexuan Cui).
- Latency testing framework (Branden Bonaby).
- Decoupling Hyper-V page size from guest page size (Himadri Pandya).
-----BEGIN PGP SIGNATURE-----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=oJGE
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
The API will be used by the hv_balloon and hv_vmbus drivers.
Balloon up/down and hot-add of memory must not be active if the user
wants the Linux VM to support hibernation, because they are incompatible
with hibernation according to Hyper-V team, e.g. upon suspend the
balloon VSP doesn't save any info about the ballooned-out pages (if any);
so, after Linux resumes, Linux balloon VSC expects that the VSP will
return the pages if Linux is under memory pressure, but the VSP will
never do that, since the VSP thinks it never stole the pages from the VM.
So, if the user wants Linux VM to support hibernation, Linux must forbid
balloon up/down and hot-add, and the only functionality of the balloon VSC
driver is reporting the VM's memory pressure to the host.
Ideally, when Linux detects that the user wants it to support hibernation,
the balloon VSC should tell the VSP that it does not support ballooning
and hot-add. However, the current version of the VSP requires the VSC
should support these capabilities, otherwise the capability negotiation
fails and the VSC can not load at all, so with the later changes to the
VSC driver, Linux VM still reports to the VSP that the VSC supports these
capabilities, but the VSC ignores the VSP's requests of balloon up/down
and hot add, and reports an error to the VSP, when applicable. BTW, in
the future the balloon VSP driver will allow the VSC to not support the
capabilities of balloon up/down and hot add.
The ACPI S4 state is not a must for hibernation to work, because Linux is
able to hibernate as long as the system can shut down. However in practice
we decide to artificially use the presence of the virtual ACPI S4 state as
an indicator of the user's intent of using hibernation, because Linux VM
must find a way to know if the user wants to use the hibernation feature
or not.
By default, Hyper-V does not enable the virtual ACPI S4 state; on recent
Hyper-V hosts (e.g. RS5, 19H1), the administrator is able to enable the
state for a VM by WMI commands.
Once all the vmbus and VSC patches for the hibernation feature are
accepted, an extra patch will be submitted to forbid hibernation if the
virtual ACPI S4 state is absent, i.e. hv_is_hibernation_supported() is
false.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V assumes page size to be 4K. While this assumption holds true on
x86 architecture, it might not be true for ARM64 architecture. Hence
define hyper-v specific function to allocate a zeroed page which can
have a different implementation on ARM64 architecture to handle the
conflict between hyper-v's assumed page size and actual guest page size.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V has historically initialized stimer-based clockevents late in the
process of onlining a CPU because clockevents depend on stimer
interrupts. In the original Hyper-V design, stimer interrupts generate a
VMbus message, so the VMbus machinery must be running first, and VMbus
can't be initialized until relatively late. On x86/64, LAPIC timer based
clockevents are used during early initialization before VMbus and
stimer-based clockevents are ready, and again during CPU offlining after
the stimer clockevents have been shut down.
Unfortunately, this design creates problems when offlining CPUs for
hibernation or other purposes. stimer-based clockevents are shut down
relatively early in the offlining process, so clockevents_unbind_device()
must be used to fallback to the LAPIC-based clockevents for the remainder
of the offlining process. Furthermore, the late initialization and early
shutdown of stimer-based clockevents doesn't work well on ARM64 since there
is no other timer like the LAPIC to fallback to. So CPU onlining and
offlining doesn't work properly.
Fix this by recognizing that stimer Direct Mode is the normal path for
newer versions of Hyper-V on x86/64, and the only path on other
architectures. With stimer Direct Mode, stimer interrupts don't require any
VMbus machinery. stimer clockevents can be initialized and shut down
consistent with how it is done for other clockevent devices. While the old
VMbus-based stimer interrupts must still be supported for backward
compatibility on x86, that mode of operation can be treated as legacy.
So add a new Hyper-V stimer entry in the CPU hotplug state list, and use
that new state when in Direct Mode. Update the Hyper-V clocksource driver
to allocate and initialize stimer clockevents earlier during boot. Update
Hyper-V initialization and the VMbus driver to use this new design. As a
result, the LAPIC timer is no longer used during boot or CPU
onlining/offlining and clockevents_unbind_device() is not called. But
retain the old design as a legacy implementation for older versions of
Hyper-V that don't support Direct Mode.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
When sending an IPI to a single CPU there is no need to deal with cpumasks.
With 2 CPU guest on WS2019 a minor (like 3%, 8043 -> 7761 CPU cycles)
improvement with smp_call_function_single() loop benchmark can be seeb. The
optimization, however, is tiny and straitforward. Also, send_ipi_one() is
important for PV spinlock kick.
Switching to the regular APIC IPI send for CPU > 64 case does not make
sense as it is twice as expesive (12650 CPU cycles for __send_ipi_mask_ex()
call, 26000 for orig_apic.send_IPI(cpu, vector)).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Link: https://lkml.kernel.org/r/20191027151938.7296-1-vkuznets@redhat.com
Now that there's Hyper-V IOMMU driver, Linux can switch to x2apic mode
when supported by the vcpus.
However, the apic access functions for Hyper-V enlightened apic assume
xapic mode only.
As a result, Linux fails to bring up secondary cpus when run as a guest
in QEMU/KVM with both hv_apic and x2apic enabled.
According to Michael Kelley, when in x2apic mode, the Hyper-V synthetic
apic MSRs behave exactly the same as the corresponding architectural
x2apic MSRs, so there's no need to override the apic accessors. The
only exception is hv_apic_eoi_write, which benefits from lazy EOI when
available; however, its implementation works for both xapic and x2apic
modes.
Fixes: 29217a4746 ("iommu/hyper-v: Add Hyper-V stub IOMMU driver")
Fixes: 6b48cb5f83 ("X86/Hyper-V: Enlighten APIC access")
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191010123258.16919-1-rkagan@virtuozzo.com
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
Pull x86 hyperv updates from Ingo Molnar:
"Misc updates related to page size abstractions within the HyperV code,
in preparation for future features"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drivers: hv: vmbus: Replace page definition with Hyper-V specific one
x86/hyperv: Add functions to allocate/deallocate page for Hyper-V
x86/hyperv: Create and use Hyper-V page definitions
When the 'start' parameter is >= 0xFF000000 on 32-bit
systems, or >= 0xFFFFFFFF'FF000000 on 64-bit systems,
fill_gva_list() gets into an infinite loop.
With such inputs, 'cur' overflows after adding HV_TLB_FLUSH_UNIT
and always compares as less than end. Memory is filled with
guest virtual addresses until the system crashes.
Fix this by never incrementing 'cur' to be larger than 'end'.
Reported-by: Jong Hyun Park <park.jonghyun@yonsei.ac.kr>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2ffd9e33ce ("x86/hyper-v: Use hypercall for remote TLB flush")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
