Add checks for removing a region from available memory in different
scenarios:
- The requested region matches one in the collection of available
memory regions
- The requested region does not exist in memblock.memory
- The region overlaps with one of the entries: from the top (its end
address is bigger than the base of the existing region) or from the
bottom (its base address is smaller than the end address of one of
the regions)
- The region is within an already defined region
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/8e6aa005407bbe1a75b75e85ac04ebb51318a52a.1643796665.git.karolinadrobnik@gmail.com
Add checks for marking a region as reserved in different scenarios:
- The region does not overlap with existing entries
- The region overlaps with one of the previous entries: from the top
(its end address is bigger than the base of the existing region) or
from the bottom (its base address is smaller than the end address of
one of the regions)
- The region is within an already defined region
- The same region is marked as reserved twice
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/cac867d2b6c17e53d9e977b5d6cd88cc4e9453b6.1643796665.git.karolinadrobnik@gmail.com
Add checks for adding a new region in different scenarios:
- The region does not overlap with existing entries
- The region overlaps with one of the previous entries: from the top
(its end address is bigger than the base of the existing region) or
from the bottom (its base address is smaller than the end address of
one of the regions)
- The region is within an already defined region
- The same region is added twice to the collection of available memory
regions
Add checks for memblock initialization to verify it sets memblock data
structures to expected values.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/b6c26525025bccec0bf7419473d4d1293eb82b3b.1643796665.git.karolinadrobnik@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYhDJyQAKCRCRxhvAZXjc
oqDZAP47lp7dQhndp5AuIsoeL/YIqbhFNfJ8hVUAcbFx/wJPFAEAtwXoeVXWT2ms
pU4nafoaQOpgsZJnD0UC5B/Pkr6laQ4=
=N5oo
-----END PGP SIGNATURE-----
Merge tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
There turned out to be a few problems with btfgen selftests.
First, core_btfgen tests are failing in BPF CI due to the use of
full-featured bpftool, which has extra dependencies on libbfd, libcap,
etc, which are present in BPF CI's build environment, but those shared
libraries are missing in QEMU image in which test_progs is running.
To fix this problem, use minimal bootstrap version of bpftool instead.
It only depend on libelf and libz, same as libbpf, so doesn't add any
new requirements (and bootstrap bpftool still implementes entire
`bpftool gen` functionality, which is quite convenient).
Second problem is even more interesting. Both core_btfgen and core_reloc
reuse the same set of struct core_reloc_test_case array of test case
definitions. That in itself is not a problem, but btfgen test replaces
test_case->btf_src_file property with the path to temporary file into
which minimized BTF is output by bpftool. This interferes with original
core_reloc tests, depending on order of tests execution (core_btfgen is
run first in sequential mode and skrews up subsequent core_reloc run by
pointing to already deleted temporary file, instead of the original BTF
files) and whether those two runs share the same process (in parallel
mode the chances are high for them to run in two separate processes and
so not interfere with each other).
To prevent this interference, create and use local copy of a test
definition. Mark original array as constant to catch accidental
modifcations. Note that setup_type_id_case_success() and
setup_type_id_case_success() still modify common test_case->output
memory area, but it is ok as each setup function has to re-initialize it
completely anyways. In sequential mode it leads to deterministic and
correct initialization. In parallel mode they will either each have
their own process, or if core_reloc and core_btfgen happen to be run by
the same worker process, they will still do that sequentially within the
worker process. If they are sharded across multiple processes, they
don't really share anything anyways.
Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just
a "flavor" of core_reloc test, not an independent set of tests. So make
it more obvious.
Last problem that needed solving was that location of bpftool differs
between test_progs and test_progs' flavors (e.g., test_progs-no_alu32).
To keep it simple, create a symlink to bpftool both inside
selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That
way, from inside core_reloc test, location to bpftool is just "./bpftool".
v2->v3:
- fix bpftool location relative the test_progs-no_alu32;
v1->v2:
- fix corruption of core_reloc_test_case.
Fixes: 704c91e59f ("selftests/bpf: Test "bpftool gen min_core_btf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yucong Sun <sunyucong@gmail.com>
Link: https://lore.kernel.org/bpf/20220220042720.3336684-1-andrii@kernel.org
Memblock simulator needs to be able to reset memblock data structures
between different test cases. Add a function that sets all fields to
their default values.
Add a test checking if memblock is being initialized to expected values.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/8c185aa7e0dd68c2c7e937c9a06c90ae413e240f.1643796665.git.karolinadrobnik@gmail.com
Build the kernel and selftest with clang compiler with LLVM=1,
make -j LLVM=1
make -C tools/testing/selftests/bpf -j LLVM=1
I hit the following selftests/bpf compilation error:
In file included from test_cpp.cpp:3:
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:73:8:
error: 'relaxed_core_relocs' is deprecated: libbpf v0.6+: field has no effect [-Werror,-Wdeprecated-declarations]
struct bpf_object_open_opts {
^
test_cpp.cpp:56:2: note: in implicit move constructor for 'bpf_object_open_opts' first required here
LIBBPF_OPTS(bpf_object_open_opts, opts);
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:77:3: note: expanded from macro 'LIBBPF_OPTS'
(struct TYPE) { \
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:90:2: note: 'relaxed_core_relocs' has been explicitly marked deprecated here
LIBBPF_DEPRECATED_SINCE(0, 6, "field has no effect")
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:24:4: note: expanded from macro 'LIBBPF_DEPRECATED_SINCE'
(LIBBPF_DEPRECATED("libbpf v" # major "." # minor "+: " msg))
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:19:47: note: expanded from macro 'LIBBPF_DEPRECATED'
#define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg)))
There are two ways to fix the issue, one is to use GCC diagnostic ignore pragma, and the
other is to open code bpf_object_open_opts instead of using LIBBPF_OPTS.
Since in general LIBBPF_OPTS is preferred, the patch fixed the issue by
adding proper GCC diagnostic ignore pragmas.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217194005.2765348-1-yhs@fb.com
Since commit 2843ff6f36 ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in kernel MPTCP PM implementation can process a single
incoming add address option at any given time. In the
mentioned test the server can surpass such limit. Let the
setup cope with that allowing a faster add_addr retransmission.
Fixes: a88c9e4969 ("mptcp: do not block subflows creation on errors")
Fixes: f7efc7771e ("mptcp: drop argument port from mptcp_pm_announce_addr")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned test has to wait for a subflow creation failure.
The current code looks for TCP sockets in TW state and sometimes
misses the relevant event. Switch to a more stable check, looking
for the associated mib counter.
Fixes: 46e967d187 ("selftests: mptcp: add tests for subflow creation failure")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I managed to get hold of a machine that has SEV but not SEV-ES, and
sev_migrate_tests fails because sev_vm_create(true) returns ENOTTY.
Fix this, and while at it also return KSFT_SKIP on machines that do
not have SEV at all, instead of returning 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES VMs with mirrors to be intra-host migrated they need to be
able to migrate with the mirror. This is due to that fact that all VMSAs
need to be added into the VM with LAUNCH_UPDATE_VMSA before
lAUNCH_FINISH. Allowing migration with mirrors allows users of SEV-ES to
keep the mirror VMs VMSAs during migration.
Adds a list of mirror VMs for the original VM iterate through during its
migration. During the iteration the owner pointers can be updated from
the source to the destination. This fixes the ASID leaking issue which
caused the blocking of migration of VMs with mirrors.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220211193634.3183388-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To allow showing the 'help' menu even if these tools are not available.
While at it, also avoid launching the command then checking $?. Instead,
the check is directly done in the 'if'.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tmp files will only be created when a test will be launched.
This avoid 'dd' output when '-h' is used for example.
While at it, also avoid creating netns that will be removed when
starting the first test.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shellcheck found that these variables were set but never used.
Note that rndh is no longer prefixed with '0-' but it doesn't change
anything.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With an error if it is an unknown option.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch simplified pm_nl_change_endpoint(), using id-based address
lookups only. And dropped the fragile way of parsing 'addr' and 'id'
from the output of pm_nl_show_endpoints().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the increase number of tests, one CI instance, using a debug kernel
config and not recent hardware, takes around 10 minutes to execute the
slowest MPTCP test: mptcp_join.sh.
Even if most CIs don't take that long to execute these tests --
typically max 10 minutes to run all selftests -- it will help some of
them if the timeout is increased.
The timeout could be disabled but it is always good to have an extra
safeguard, just in case.
Please note that on slow public CIs with kernel debug settings, it has
been observed it can easily take up to 45 minutes to execute all tests
in this very slow environment with other jobs running in parallel.
The slowest test, mptcp_join.sh takes ~30 minutes in this case.
In such environments, the selftests timeout set in the 'settings' file
is disabled because this environment is known as being exceptionnally
slow. It has been decided not to take such exceptional environments into
account and set the timeout to 20min.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This Kselftest fixes update for Linux 5.17-rc5 consists of fixes
to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests.
-----BEGIN PGP SIGNATURE-----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=I5xz
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CC can have multiple sub-strings like "ccache gcc". For check_cc.sh,
CC needs to be treated like one argument. Put double quotes around it to
make CC one string and hence one argument.
Fixes: 2adcba79e6 ("selftests/x86: Add a selftest for SGX")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-3-usama.anjum@collabora.com
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace22 ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices,
avoid FW assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Nrzq
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
Add a basic test to make sure ping sockets don't crash
with IPV6_2292* options.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_HOPLIMIT via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case HOPLIMIT ICMP cmsg - packet data returned 1, expected 0
Case HOPLIMIT ICMP diff - packet data returned 1, expected 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_TCLASS via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case TCLASS ICMP cmsg - packet data returned 1, expected 0
Case TCLASS ICMP cmsg - rejection returned 0, expected 1
Case TCLASS ICMP diff - pass returned 1, expected 0
Case TCLASS ICMP diff - packet data returned 1, expected 0
Case TCLASS ICMP diff - rejection returned 0, expected 1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_DONTFRAG via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case DONTFRAG ICMP setsock returned 0, expected 1
Case DONTFRAG ICMP cmsg returned 0, expected 1
Case DONTFRAG ICMP both returned 0, expected 1
Case DONTFRAG ICMP diff returned 0, expected 1
FAIL - 4/24 cases failed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit reuses the core_reloc test to check if the BTF files
generated with "bpftool gen min_core_btf" are correct. This introduces
test_core_btfgen() that runs all the core_reloc tests, but this time
the source BTF files are generated by using "bpftool gen min_core_btf".
The goal of this test is to check that the generated files are usable,
and not to check if the algorithm is creating an optimized BTF file.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-8-mauricio@kinvolk.io
Add WRITE_OPD to check that you can't modify function
descriptors.
Gives the following result when function descriptors are
not protected:
lkdtm: Performing direct entry WRITE_OPD
lkdtm: attempting bad 16 bytes write at c00000000269b358
lkdtm: FAIL: survived bad write
lkdtm: do_nothing was hijacked!
Looks like a standard compiler barrier() is not enough to force
GCC to use the modified function descriptor. Had to add a fake empty
inline assembly to force GCC to reload the function descriptor.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7eeba50d16a35e9d799820e43304150225f20197.1644928018.git.christophe.leroy@csgroup.eu
* Read HW interrupt pending state from the HW
x86:
* Don't truncate the performance event mask on AMD
* Fix Xen runstate updates to be atomic when preempting vCPU
* Fix for AMD AVIC interrupt injection race
* Several other AMD fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIL4G4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkQQf/Z75dnmdRl8sHHnGjwH2IhWHwAg+h
5O+mJphYt4cvVMexP5dj69b7mHtKMeg/0TxPvPfwCLlhzKkW1gQFwwBAq/YuBCKw
cnMuVPeCSWo6znpS+jYUF4FAJgPKkzfFR9UwYAR5UexSWyOwU8rLcvSxj8vJjO/l
sIke+f767Ks2KgcTMIudObg+vDcgnQXI8n8ztI7hF1WJKYHdTKFkYN7BYRxQ9BW6
4fq51218DhRMv6S7so5dhYC473f+D0t8b5S/Mygur/x6mzsdQJKeOmi8aWGoDa/B
Bmse+X0lHoOkdXaxqpBgQCYeyrXohNcXx7cpGRVFnS45Jf7MLG4OfVHWNQ==
=kD2l
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
bpf_msg_push_data may return a non-zero value to indicate an error. The
return value should be checked to prevent undetected errors.
To indicate an error, the BPF programs now perform a different action
than their intended one to make the userspace test program notice the
error, i.e., the programs supposed to pass/redirect drop, the program
supposed to drop passes.
Fixes: 84fbfe026a ("bpf: test_sockmap add options to use msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com
Add an example of how to build C++ template-based BPF skeleton wrapper.
It's an actually runnable valid use of skeleton through more C++-like
interface. Note that skeleton destuction happens implicitly through
Skeleton<T>'s destructor.
Also make test_cpp runnable as it would have crashed on invalid btf
passed into btf_dump__new().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220212055733.539056-3-andrii@kernel.org
When compiling selftests in -O2 mode with GCC1, we get three new
compilations warnings about potentially uninitialized variables.
Compiler is wrong 2 out of 3 times, but this patch makes GCC11 happy
anyways, as it doesn't cost us anything and makes optimized selftests
build less annoying.
The amazing one is tc_redirect case of token that is malloc()'ed before
ASSERT_OK_PTR() check is done on it. Seems like GCC pessimistically
assumes that libbpf_get_error() will dereference the contents of the
pointer (no it won't), so the only way I found to shut GCC up was to do
zero-initializaing calloc(). This one was new to me.
For linfo case, GCC didn't realize that linfo_size will be initialized
by the function that is returning linfo_size as out parameter.
core_reloc.c case was a real bug, we can goto cleanup before initializing
obj. But we don't need to do any clean up, so just continue iteration
intstead.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211190927.1434329-1-andrii@kernel.org
Instead of hard coding a small amount of tests, generate a wider
range of tests to try catch any corner cases that could show up.
These new tests test different MTE tag lengths and offsets, which
previously would have caused infinite loops in the kernel. This was
fixed by 295cf15623 ("arm64: Avoid premature usercopy failure"),
so these are regressions tests for that corner case.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-7-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To expand the test coverage for MTE tags in userspace memory,
also perform the test with `write`, `readv` and `writev` syscalls.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-6-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The test is currently hardcoded to use the `read` syscall, this commit adds
a test_type enum to support expanding the test coverage to other syscalls.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-5-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To check there are no assumptions in the kernel about buffer sizes or alignments of
user space pointers, expand the test to cover different sizes and offsets.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-4-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Future commits will have multiple iterations of tests in this function,
so make the error handling assume it will pass and then bail out if there
is an error.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-3-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
These can be used to place an MTE tag at an address that is not at a
page size boundary.
The kernel prior to 295cf15623 ("arm64: Avoid premature usercopy failure"),
would infinite loop if an MTE tag was placed not at a PAGE_SIZE boundary.
This is because the kernel checked if the pages were readable by checking the
first byte of each page, but would then fault in the middle of the page due
to the MTE tag.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The GCR EL1 test unconditionally includes local definitions of the prctls
it tests. Since not only will the kselftest build infrastructure ensure
that the in tree uapi headers are available but the toolchain being used to
build kselftest may ensure that system uapi headers with MTE support are
available this causes the compiler to warn about duplicate definitions.
Remove these duplicate definitions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220126174421.1712795-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
An ARRAY_SIZE() has been added to kselftest.h so remove the local versions
in some of the arm64 selftests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220124171748.2195875-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 2c212e1bae ("KVM: s390: Return error on SIDA memop on normal
guest") fixed the behavior of the SIDA memops for normal guests. It
would be nice to have a way to test whether the current kernel has
the fix applied or not. Thus add a check to the KVM selftests for
these two memops.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220215074824.188440-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The PREEMPT_RT patchset does not use do_softirq() function thus trying
to filter for do_softirq fails for such kernel:
echo do_softirq
ftracetest: 81: echo: echo: I/O error
Choose some other visible function for the test. The function does not
have to be actually executed during the test, because it is only testing
filter API interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test the emulation of TEST PROTECTION in the presence of storage keys.
Emulation only occurs under certain conditions, one of which is the host
page being protected.
Trigger this by protecting the test pages via mprotect.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-5-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.
Improve the accuracy of MTU policing as follows:
- account for mac_len for non-GSO packets at TC ingress.
- compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While debugging an issue, we wanted to check whether the arch specific
kernel memmove implementation is correct.
This selftest could help test that.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57242c1fe7aba6b7f0fcd0490303bfd5f222ee00.1631512686.git.riteshh@linux.ibm.com
Just before the 2.35 release of glibc, the __rseq_offset userspace ABI
was changed from int to ptrdiff_t.
Adapt to this change in the kernel selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://sourceware.org/pipermail/libc-alpha/2022-February/136024.html
The TH_LOG() macro is an optional debug logging function made
available by kselftest itself. When TH_LOG_ENABLED is set it
prints the provided message with additional information and
formatting that already includes a newline.
Providing a newline to the message printed by TH_LOG() results
in a double newline that produces irregular test output.
Remove the unnecessary newlines from the text provided to
TH_LOG().
Fixes: 1b35eb7195 ("selftests/sgx: Encpsulate the test enclave creation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/6fd171ba622aed172a7c5b129d34d50bd0482f24.1644355600.git.reinette.chatre@intel.com
In support of debugging the SGX tests print details from
the enclave and its memory mappings if any failure is encountered
during enclave loading.
When a failure is encountered no data is printed because the
printing of the data is preceded by cleanup of the data.
Move the data cleanup after the data print.
Fixes: 1471721489 ("selftests/sgx: Dump segments and /proc/self/maps only on failure")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/dab672f771e9b99e50c17ae2a75dc0b020cb0ce9.1644355600.git.reinette.chatre@intel.com
It is not possible to build an enclave if it was not possible to load
the binary from which it should be constructed. Do not attempt
to make further progress but instead return with failure. A
"return false" from setup_test_encl() is expected to trip an
ASSERT_TRUE() and abort the rest of the test.
Fixes: 1b35eb7195 ("selftests/sgx: Encpsulate the test enclave creation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/e3778c77f95e6dca348c732b12f155051d2899b4.1644355600.git.reinette.chatre@intel.com
== Background ==
The SGX selftests track parts of the enclave binaries in an array:
encl->segment_tbl[]. That array is dynamically allocated early
(but not first) in the test's lifetime. The array is referenced
at the end of the test in encl_delete().
== Problem ==
encl->segment_tbl[] can be NULL if the test fails before its
allocation. That leads to a NULL-pointer-dereference in encl_delete().
This is triggered during early failures of the selftest like if the
enclave binary ("test_encl.elf") is deleted.
== Solution ==
Ensure encl->segment_tbl[] is valid before attempting to access
its members. The offset with which it is accessed, encl->nr_segments,
is initialized before encl->segment_tbl[] and thus considered valid
to use after the encl->segment_tbl[] check succeeds.
Fixes: 3200505d4d ("selftests/sgx: Create a heap for the test enclave")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/90a31dfd640ea756fa324712e7cbab4a90fa7518.1644355600.git.reinette.chatre@intel.com
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
There is no vmx_pi_mmio_test file. Remove it to get rid of error while
creation of selftest archive:
rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 6a58150859 ("selftest: KVM: Add intra host migration tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
non-regular file needs to be compiled and then copied to the output
directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This
removes error thrown by rsync when non-regular object isn't found:
rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 0f71241a8e ("selftests/exec: add file type errno tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add selftest for nft_synproxy, from Florian Westphal.
2) xt_socket destroy path incorrectly disables IPv4 defrag for
IPv6 traffic (typo), from Eric Dumazet.
3) Fix exit value selftest nft_concat_range.sh, from Hangbin Liu.
4) nft_synproxy disables the IPv4 hooks if the IPv6 hooks fail
to be registered.
5) disable rp_filter on router in selftest nft_fib.sh, also
from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->rtm_tos option is normally used to route packets based on both
the destination address and the DS field. However it's ignored for
IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route
is going to work only on the destination address anyway, so it won't
behave as specified.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test treated zero as a successful run when it really should treat
non-zero as a successful run. A mount's idmapping can't change once it
has been attached to the filesystem.
Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org
Fixes: 01eadc8dd9 ("tests: add mount_setattr() selftests")
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Tests to ensure validator boundary cases are working correctly within
close and far bounds. Ensures __data_loc and __rel_loc strings are
null terminated and within range. Ensures min size checks work as
expected.
Link: https://lkml.kernel.org/r/20220118204326.2169-11-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tests perf can be attached to and written out correctly. Ensures attach
updates status bits in user programs.
Link: https://lkml.kernel.org/r/20220118204326.2169-10-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tests matching deletes, creation of basic and complex types. Ensures
common patterns work correctly when interacting with dynamic_events
file.
Link: https://lkml.kernel.org/r/20220118204326.2169-9-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tests basic functionality of registering/deregistering, status and
writing data out via ftrace mechanisms within user_events.
Link: https://lkml.kernel.org/r/20220118204326.2169-8-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF,
avoid overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jlhJ
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
This Kselftest fixes updated for Linux 5.17-rc4 consists of build and
run-time fixes to pidfd, clone3, and ir tests.
-----BEGIN PGP SIGNATURE-----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=UT3I
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-time fixes to pidfd, clone3, and ir tests"
* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ir: fix build with ancient kernel headers
selftests: fixup build warnings in pidfd / clone3 tests
pidfd: fix test failure due to stack overflow on some arches
This KUnit fixes update for Linux 5.17-rc4 consists of bug fixes
to the test and usage documentation.
-----BEGIN PGP SIGNATURE-----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=EqMn
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fixes to the test and usage documentation"
* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Fix usage bug
kunit: fix missing f in f-string in run_checks.py
Some distros may enable rp_filter by default. After ns1 change addr to
10.0.2.99 and set default router to 10.0.2.1, while the connected router
address is still 10.0.1.1. The router will not reply the arp request
from ns1. Fix it by setting the router's veth0 rp_filter to 0.
Before the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1
table inet filter {
chain prerouting {
type filter hook prerouting priority filter; policy accept;
ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop
ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop
}
}
After the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
PASS: fib expression did drop packets for 1.1.1.1
PASS: fib expression did drop packets for 1c3::c01d
Fixes: 8294442124 ("selftests: netfilter: add fib test case")
Signed-off-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Introduce a new test for Hyper-V nSVM extensions (Hyper-V on KVM) and add
a test for enlightened MSR-Bitmap feature:
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from clean fields mask, KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from clean fields mask and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_svm_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of clean fields. The behavior is correct as enlightened
MSR-Bitmap feature is just an optimization, KVM is not obliged to ignore
updates when the corresponding bit in clean fields stays clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's a copy of 'struct vmcb_control_area' definition in KVM selftests,
update it to allow testing of the newly introduced features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to VMX, allocate memory for MSR-Bitmap and fill in 'msrpm_base_pa'
in VMCB. To use it, tests will need to set INTERCEPT_MSR_PROT interception
along with the required bits in the MSR-Bitmap.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a test for enlightened MSR-Bitmap feature (Hyper-V on KVM):
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from 'hv_clean_fields', KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from 'hv_clean_fields' and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_vmx_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of 'hv_clean_fields'. The behavior is correct as
enlightened MSR-Bitmap feature is just an optimization, KVM is not obliged
to ignore updates when the corresponding bit in 'hv_clean_fields' stays
clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of just resetting 'hv_clean_fields' to 0 on every enlightened
vmresume, do the expected cleaning of the corresponding bit on enlightened
vmwrite. Avoid direct access to 'current_evmcs' from evmcs_test to support
the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID 0x40000000.EAX is now always present as it has Enlightened
MSR-Bitmap feature bit set. Adapt the test accordingly. Opportunistically
add a check for the supported eVMCS version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to dirty_log_perf_test.c to disable
KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE and KVM_DIRTY_LOG_INITIALLY_SET so
the legacy dirty logging code path can be tested.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-19-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, this test does not find the sysctl entry in place:
sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory
iperf3: error - unable to send control message: Bad file descriptor
FAIL: iperf3 returned an error
Fixes: 7152303cbe ("selftests: netfilter: add synproxy test")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Test TIMESTAMPING and TXTIME across UDP / ICMP and IP versions.
Before ICMPv6 support:
# ./tools/testing/selftests/net/cmsg_time.sh
Case ICMPv6 - ts cnt returned '0', expected '2'
Case ICMPv6 - ts0 SCHED returned '', expected 'OK'
Case ICMPv6 - ts0 SND returned '', expected 'OK'
Case ICMPv6 - TXTIME abs returned '', expected 'OK'
Case ICMPv6 - TXTIME rel returned '', expected 'OK'
FAIL - 5/36 cases failed
After:
# ./tools/testing/selftests/net/cmsg_time.sh
OK
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support requesting Tx timestamps:
$ ./cmsg_sender -p i -t -4 $tgt 123 -d 1000
SCHED ts0 61us
SND ts0 1071us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test if setting SO_MARK with setsockopt works and if cmsg
takes precedence over it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use new capabilities of cmsg_sender to test ICMP and RAW sockets,
previously only UDP was tested.
Before SO_MARK support was added to ICMPv6:
# ./cmsg_so_mark.sh
Case ICMP rejection returned 0, expected 1
FAIL - 1/12 cases failed
After:
# ./cmsg_so_mark.sh
OK
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support sending fake ICMP(v6) messages and UDP via RAW sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parametrize the code so that it can support UDP and ICMP
sockets in the future, and more cmsg types.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 33c563ad28 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the context access tests for sk_lookup prog to cover the surprising
case of a 4-byte load from the remote_port field, where the expected value
is actually shifted by 16 bits.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220209184333.654927-3-jakub@cloudflare.com
When the nft_concat_range test failed, it exit 1 in the code
specifically.
But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simple test for synproxy feature, iperf3 should be intercepted
by synproxy netns, but connection should still succeed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At this point the subsystem can enumerate all CXL ports (CXL.mem decode
resources in upstream switch ports and host bridges) in a system. The
last mile is connecting those ports to endpoints.
The cxl_mem driver connects an endpoint device to the platform CXL.mem
protoctol decode-topology. At ->probe() time it walks its
device-topology-ancestry and adds a CXL Port object at every Upstream
Port hop until it gets to CXL root. The CXL root object is only present
after a platform firmware driver registers platform CXL resources. For
ACPI based platform this is managed by the ACPI0017 device and the
cxl_acpi driver.
The ports are registered such that disabling a given port automatically
unregisters all descendant ports, and the chain can only be registered
after the root is established.
Given ACPI device scanning may run asynchronously compared to PCI device
scanning the root driver is tasked with rescanning the bus after the
root successfully probes.
Conversely if any ports in a chain between the root and an endpoint
becomes disconnected it subsequently triggers the endpoint to
unregister. Given lock depenedencies the endpoint unregistration happens
in a workqueue asynchronously. If userspace cares about synchronizing
delayed work after port events the /sys/bus/cxl/flush attribute is
available for that purpose.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: clarify changelog, rework hotplug support]
Link: https://lore.kernel.org/r/164398782997.903003.9725273241627693186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Per the CXL specification (8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities) the Device Serial Number capability is mandatory.
Emit it for user tooling to identify devices.
It is reasonable to ask whether the attribute should be added to the
list of PCI sysfs device attributes. The PCI layer can optionally emit
it too, but the CXL subsystem is aiming to preserve its independence and
the possibility of CXL topologies with non-PCI devices in it. To date
that has only proven useful for the 'cxl_test' model, but as can be seen
with seen with ACPI0016 devices, sometimes all that is needed is a
platform firmware table to point to CXL Component Registers in MMIO
space to define a "CXL" device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164366608838.196598.16856227191534267098.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL 2.0 8.1.3.8.2 states:
Memory_Active: When set, indicates that the CXL Range 1 memory is
fully initialized and available for software use. Must be set within
Range 1. Memory_Active_Timeout of deassertion of reset to CXL device
if CXL.mem HwInit Mode=1
Unfortunately, Memory_Active can take quite a long time depending on
media size (up to 256s per 2.0 spec). Provide a callback for the
eventual establishment of CXL.mem operations via the 'cxl_mem' driver
the 'struct cxl_memdev'. The implementation waits for 60s by default for
now and can be overridden by the mbox_ready_time module parameter.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: switch to sleeping wait]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164298427373.3018233.9309741847039301834.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that dport and decoder enumeration is centralized in the port
driver, the @host argument for these helpers can be made implicit. For
the root port the host is the port's uport device (ACPI0017 for
cxl_acpi), and for all other descendant ports the devm context is the
parent of @port.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164375043390.484143.17617734732003230076.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The need for a CXL port driver and a dedicated cxl_bus_type is driven by
a need to simultaneously support 2 independent physical memory decode
domains (cache coherent CXL.mem and uncached PCI.mmio) that also
intersect at a single PCIe device node. A CXL Port is a device that
advertises a CXL Component Register block with an "HDM Decoder
Capability Structure".
>From Documentation/driver-api/cxl/memory-devices.rst:
Similar to how a RAID driver takes disk objects and assembles them into
a new logical device, the CXL subsystem is tasked to take PCIe and ACPI
objects and assemble them into a CXL.mem decode topology. The need for
runtime configuration of the CXL.mem topology is also similar to RAID in
that different environments with the same hardware configuration may
decide to assemble the topology in contrasting ways. One may choose
performance (RAID0) striping memory across multiple Host Bridges and
endpoints while another may opt for fault tolerance and disable any
striping in the CXL.mem topology.
The port driver identifies whether an endpoint Memory Expander is
connected to a CXL topology. If an active (bound to the 'cxl_port'
driver) CXL Port is not found at every PCIe Switch Upstream port and an
active "root" CXL Port then the device is just a plain PCIe endpoint
only capable of participating in PCI.mmio and DMA cycles, not CXL.mem
coherent interleave sets.
The 'cxl_port' driver lets the CXL subsystem leverage driver-core
infrastructure for setup and teardown of register resources and
communicating device activation status to userspace. The cxl_bus_type
can rendezvous the async arrival of platform level CXL resources (via
the 'cxl_acpi' driver) with the asynchronous enumeration of Memory
Expander endpoints, while also implementing a hierarchical locking model
independent of the associated 'struct pci_dev' locking model. The
locking for dport and decoder enumeration is now handled in the core
rather than callers.
For now the port driver only enumerates and registers CXL resources
(downstream port metadata and decoder resources) later it will be used
to take action on its decoders in response to CXL.mem region
provisioning requests.
Note1: cxlpci.h has long depended on pci.h, but port.c was the first to
not include pci.h. Carry that dependency in cxlpci.h.
Note2: cxl port enumeration and probing complicates CXL subsystem init
to the point that it helps to have centralized debug logging of probe
events in cxl_bus_probe().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unlike the decoder enumeration for "root decoders" described by platform
firmware, standard decoders can be enumerated from the component
registers space once the base address has been identified (via PCI,
ACPI, or another mechanism).
Add common infrastructure for HDM (Host-managed-Device-Memory) Decoder
enumeration and share it between host-bridge, upstream switch port, and
cxl_test defined decoders.
The locking model for switch level decoders is to hold the port lock
over the enumeration. This facilitates moving the dport and decoder
enumeration to a 'port' driver. For now, the only enumerator of decoder
resources is the cxl_acpi root driver.
Co-developed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164374688404.395335.9239248252443123526.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The core houses infrastructure for decoder resources. A CXL port's
dports are more closely related to decoder infrastructure than topology
enumeration. Implement generic PCI based dport enumeration in the core,
i.e. arrange for existing root port enumeration from cxl_acpi to share
code with switch port enumeration which just amounts to a small
difference in a pci_walk_bus() invocation once the appropriate 'struct
pci_bus' has been retrieved.
Set the convention that decoder objects are registered after all dports
are enumerated. This enables userspace to know when the CXL core is
finished establishing 'dportX' links underneath the 'portX' object.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164368114191.354031.5270501846455462665.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for switch port enumeration while also preserving the
potential for multi-domain / multi-root CXL topologies. Introduce a
'struct device' generic mechanism for retrieving a root CXL port, if one
is registered. Note that the only known multi-domain CXL configurations
are running the cxl_test unit test on a system that also publishes an
ACPI0017 device.
With this in hand the nvdimm-bridge lookup can be with
device_find_child() instead of bus_find_device() + custom mocked lookup
infrastructure in cxl_test.
The mechanism looks for a 2nd level port since the root level topology
is platform-firmware specific and the 2nd level down follows standard
PCIe topology expectations. The cxl_acpi 2nd level is associated with a
PCIe Root Port.
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164367562182.225521.9488555616768096049.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These architectures can provide access to the first syscall argument
only through PT_REGS_PARM1_CORE_SYSCALL().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-8-iii@linux.ibm.com
bpf_syscall_macro reads a long argument into an int variable, which
produces a wrong value on big-endian systems. Fix by reading the
argument into an intermediate long variable first.
Fixes: 77fc0330df ("selftests/bpf: Add a test to confirm PT_REGS_PARM4_SYSCALL")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-2-iii@linux.ibm.com
Two subtests in ksyms_module.c are not qualified as static, so these
subtests are exported as standalone tests in tests.h and lead to
confusion for the output of "./test_progs -t ksyms_module".
By using the following command ...
grep "^void \(serial_\)\?test_[a-zA-Z0-9_]\+(\(void\)\?)" \
tools/testing/selftests/bpf/prog_tests/*.c | \
awk -F : '{print $1}' | sort | uniq -c | awk '$1 != 1'
... one finds out that other tests also have a similar problem, so
fix these tests by marking subtests in these tests as static.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220208065444.648778-1-houtao1@huawei.com
This commit adjusts RUDE01 to 3 CPUs and TRACE01 to 5 CPUs in order to
test Tasks RCU's ability to handle non-power-of-two numbers of CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Thie commit adds kernel boot parameters to the SRCU-N and SRCU-P
rcutorture scenarios to cause SRCU-N to test contention-based resizing
and SRCU-P to test init_srcu_struct()-time resizing. Note that this
also tests never-resizing because the contention-based resizing normally
takes some minutes to make the shift.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit fixes a couple of typos: s/--doall/--do-all/ and
s/--doallmodconfig/--do-allmodconfig/.
[ paulmck: Add Fixes: supplied by Paul Menzel. ]
Fixes: a115a775a8 ("torture: Add "make allmodconfig" to torture.sh")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
* kvm-arm64/selftest/vgic-5.18:
: .
: A bunch of selftest fixes, courtesy of Ricardo Koller
: .
kvm: selftests: aarch64: use a tighter assert in vgic_poke_irq()
kvm: selftests: aarch64: fix some vgic related comments
kvm: selftests: aarch64: fix the failure check in kvm_set_gsi_routing_irqchip_check
kvm: selftests: aarch64: pass vgic_irq guest args as a pointer
kvm: selftests: aarch64: fix assert in gicv3_access_reg
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_poke_irq() checks that the attr argument passed to the vgic device
ioctl is sane. Make this check tighter by moving it to after the last
attr update.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-6-ricarkol@google.com
Fix the formatting of some comments and the wording of one of them (in
gicv3_access_reg).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-5-ricarkol@google.com
kvm_set_gsi_routing_irqchip_check(expect_failure=true) is used to check
the error code returned by the kernel when trying to setup an invalid
gsi routing table. The ioctl fails if "pin >= KVM_IRQCHIP_NUM_PINS", so
kvm_set_gsi_routing_irqchip_check() should test the error only when
"intid >= KVM_IRQCHIP_NUM_PINS+32". The issue is that the test check is
"intid >= KVM_IRQCHIP_NUM_PINS", so for a case like "intid =
KVM_IRQCHIP_NUM_PINS" the test wrongly assumes that the kernel will
return an error. Fix this by using the right check.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-4-ricarkol@google.com
The guest in vgic_irq gets its arguments in a struct. This struct used
to fit nicely in a single register so vcpu_args_set() was able to pass
it by value by setting x0 with it. Unfortunately, this args struct grew
after some commits and some guest args became random (specically
kvm_supports_irqfd).
Fix this by passing the guest args as a pointer (after allocating some
guest memory for it).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-3-ricarkol@google.com
The val argument in gicv3_access_reg can have any value when used for a
read, not necessarily 0. Fix the assert by checking val only for
writes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-2-ricarkol@google.com
* kvm-arm64/mmu-rwlock:
: .
: MMU locking optimisations from Jing Zhang, allowing permission
: relaxations to occur in parallel.
: .
KVM: selftests: Add vgic initialization for dirty log perf test for ARM
KVM: arm64: Add fast path to handle permission relaxation during dirty logging
KVM: arm64: Use read/write spin lock for MMU protection
Signed-off-by: Marc Zyngier <maz@kernel.org>
For ARM64, if no vgic is setup before the dirty log perf test, the
userspace irqchip would be used, which would affect the dirty log perf
test result.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-4-jingzhangos@google.com
KVM now correctly handles the OS Lock for its guests. When set, KVM
blocks all debug exceptions originating from the guest. Add test cases
to the debug-exceptions test to assert that software breakpoint,
hardware breakpoint, watchpoint, and single-step exceptions are in fact
blocked.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-7-oupton@google.com
OSLSR_EL1 is now part of the visible system register state. Add it to
the get-reg-list selftest to ensure we keep it that way.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-6-oupton@google.com
There are some spelling mistakes in some ksft messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220207092235.240284-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new dscp_t type to replace the fc_tos field of fib_config, to
ensure IPv4 routes aren't influenced by ECN bits when configured with
non-zero rtm_tos.
Before this patch, IPv4 routes specifying an rtm_tos with some of the
ECN bits set were accepted. However they wouldn't work (never match) as
IPv4 normally clears the ECN bits with IPTOS_RT_MASK before doing a FIB
lookup (although a few buggy code paths don't).
After this patch, IPv4 routes specifying an rtm_tos with any ECN bit
set is rejected.
Note: IPv6 routes ignore rtm_tos altogether, any rtm_tos is accepted,
but treated as if it were 0.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new dscp_t type to replace the tos field of struct fib4_rule,
so that fib4-rules consistently ignore ECN bits.
Before this patch, fib4-rules did accept rules with the high order ECN
bit set (but not the low order one). Also, it relied on its callers
masking the ECN bits of ->flowi4_tos to prevent those from influencing
the result. This was brittle and a few call paths still do the lookup
without masking the ECN bits first.
After this patch fib4-rules only compare the DSCP bits. ECN can't
influence the result anymore, even if the caller didn't mask these
bits. Also, fib4-rules now must have both ECN bits cleared or they will
be rejected.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a dscp_t type and its appropriate helpers that ensure ECN bits
are not taken into account when handling DSCP.
Use this new type to replace the tclass field of struct fib6_rule, so
that fib6-rules don't get influenced by ECN bits anymore.
Before this patch, fib6-rules didn't make any distinction between the
DSCP and ECN bits. Therefore, rules specifying a DSCP (tos or dsfield
options in iproute2) stopped working as soon a packets had at least one
of its ECN bits set (as a work around one could create four rules for
each DSCP value to match, one for each possible ECN value).
After this patch fib6-rules only compare the DSCP bits. ECN doesn't
influence the result anymore. Also, fib6-rules now must have the ECN
bits cleared or they will be rejected.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-4-mauricio@kinvolk.io
Some of the tests are using x86_64 ABI-specific syscall entry points
(such as __x64_sys_nanosleep and __x64_sys_getpgid). Update them to use
architecture-dependent syscall entry names.
Also update fexit_sleep test to not use BPF_PROG() so that it is clear
that the syscall parameters aren't being accessed in the bpf prog.
Note that none of the bpf progs in these tests are actually accessing
any of the syscall parameters. The only exception is perfbuf_bench, which
passes on the bpf prog context into bpf_perf_event_output() as a pointer
to pt_regs, but that looks to be mostly ignored.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e35f7051f03e269b623a68b139d8ed131325f7b7.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
On architectures that don't use a syscall wrapper, sys_* function names
are set as an alias of __se_sys_* functions. Due to this, there is no
BTF associated with sys_* function names. This results in some of the
test progs failing to load. Set the SYS_PREFIX to "__se_" to fix this
issue.
Fixes: 38261f369f ("selftests/bpf: Fix probe_user test failure with clang build kernel")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/013d632aacd3e41290445c0025db6a7055ec6e18.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
Add a test that checks that pedit adjusts source and destination
addresses of IPv4 and IPv6 packets.
Output example:
$ ./pedit_ip.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: dev swp2 ingress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp2 ingress pedit ip6 dst set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 dst set 2001:db8:2::1 [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
(Peter Zijlstra)
-----BEGIN PGP SIGNATURE-----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=0tH5
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
This patch added a command line option '-i' for mptcp_join.sh to use
'ip mptcp' commands instead of using 'pm_nl_ctl' commands to deal with
PM netlink.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the setting flags test cases, using both addr-based and
id-based lookups for the setting address.
The output looks like this:
set flags (backup) [ OK ]
(nobackup) [ OK ]
(fullmesh) [ OK ]
(nofullmesh) [ OK ]
(backup,fullmesh) [ OK ]
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the id argument for setting the address flags in
pm_nl_ctl.
Usage:
pm_nl_ctl set id 1 flags backup
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implemented a new function named pm_nl_set_endpoint(), wrapped
the PM netlink commands 'ip mptcp endpoint change flags' and 'pm_nl_ctl
set flags' in it, and used a new argument 'ip_mptcp' to choose which one
to use to set the flags of the PM endpoint.
'ip mptcp' used the ID number argument to find out the address to change
flags, while 'pm_nl_ctl' used the address and port number arguments. So
we need to parse the address ID from the PM dump output as well as the
address and port number.
Used this wrapper in do_transfer() instead of using the pm_nl_ctl command
directly.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implemented a new function named pm_nl_show_endpoints(), wrapped
the PM netlink commands 'ip mptcp endpoint show' and 'pm_nl_ctl dump' in
it, used a new argument 'ip_mptcp' to choose which one to use to show all
the PM endpoints.
Used this wrapper in do_transfer() instead of using the pm_nl_ctl commands
directly.
The original 'pos+=5' in the remoing tests only works for the output of
'pm_nl_ctl show':
id 1 flags subflow 10.0.1.1
It doesn't work for the output of 'ip mptcp endpoint show':
10.0.1.1 id 1 subflow
So implemented a more flexible approach to get the address ID from the PM
dump output to fit for both commands.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added four basic 'ip mptcp' wrappers:
pm_nl_set_limits()
pm_nl_add_endpoint()
pm_nl_del_endpoint()
pm_nl_flush_endpoint().
Wrapped the PM netlink commands 'ip mptcp' and 'pm_nl_ctl' in them, and
used a new argument 'ip_mptcp' to choose which one to use for setting the
PM limits, adding or deleting the PM endpoint.
Used the wrappers in all the selftests in mptcp_join.sh instead of using
the pm_nl_ctl commands directly.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the backup testcase using an address with a port number.
The original backup tests only work for the output of 'pm_nl_ctl dump'
without the port number. It chooses the last item in the dump to parse
the address in it, and in this case, the address is showed at the end
of the item.
But it doesn't work for the dump with the port number, in this case, the
port number is showed at the end of the item, not the address.
So implemented a more flexible approach to get the address and the port
number from the dump to fit for the port number case.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the port argument for setting the address flags in
pm_nl_ctl.
Usage:
pm_nl_ctl set 10.0.2.1 flags backup port 10100
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit e2bcbd7769 ("tools headers UAPI: remove stale lirc.h"),
the build of the selftests fails on rhel 8 since its version of
/usr/include/linux/lirc.h has no definition of RC_PROTO_RCMM32, etc [1].
[1] https://lkml.org/lkml/2022/1/28/275
Fixes: e2bcbd7769 ("tools headers UAPI: remove stale lirc.h")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These are some trivial fixups, which were needed to build the tests with
clang and -Werror. The following issues are fixed:
- Remove various unused variables.
- In child_poll_leader_exit_test, clang isn't smart enough to realize
syscall(SYS_exit, 0) won't return, so it complains we never return
from a non-void function. Add an extra exit(0) to appease it.
- In test_pidfd_poll_leader_exit, ret may be branched on despite being
uninitialized, if we have !use_waitpid. Initialize it to zero to get
the right behavior in that case.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When running the pidfd_fdinfo_test on arm64, it fails for me. After some
digging, the reason is that the child exits due to SIGBUS, because it
overflows the 1024 byte stack we've reserved for it.
To fix the issue, increase the stack size to 8192 bytes (this number is
somewhat arbitrary, and was arrived at through experimentation -- I kept
doubling until the failure no longer occurred).
Also, let's make the issue easier to debug. wait_for_pid() returns an
ambiguous value: it may return -1 in all of these cases:
1. waitpid() itself returned -1
2. waitpid() returned success, but we found !WIFEXITED(status).
3. The child process exited, but it did so with a -1 exit code.
There's no way for the caller to tell the difference. So, at least log
which occurred, so the test runner can debug things.
While debugging this, I found that we had !WIFEXITED(), because the
child exited due to a signal. This seems like a reasonably common case,
so also print out whether or not we have WIFSIGNALED(), and the
associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing
clearly when it occurs.
Finally, I'm suspicious of allocating the child's stack on our stack.
man clone(2) suggests that the correct way to do this is with mmap(),
and in particular by setting MAP_STACK. So, switch to doing it that way
instead.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add several tests to check bpf_core_types_are_compat() functionality:
- candidate type name exists and types match
- candidate type name exists but types don't match
- nested func protos at kernel recursion limit
- nested func protos above kernel recursion limit. Such bpf prog
is rejected during the load.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204005519.60361-3-mcroce@linux.microsoft.com
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: ipc, MAINTAINERS, and mm
(vmscan, debug, pagemap, kmemleak, and selftests)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kselftest/vm: revert "tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner"
MAINTAINERS: update rppt's email
mm/kmemleak: avoid scanning potential huge holes
ipc/sem: do not sleep with a spin lock held
mm/pgtable: define pte_index so that preprocessor could recognize it
mm/page_table_check: check entries at pmd levels
mm/khugepaged: unify collapse pmd clear, flush and free
mm/page_table_check: use unsigned long for page counters and cleanup
mm/debug_vm_pgtable: remove pte entry from the page table
Revert "mm/page_isolation: unset migratetype directly for non Buddy page"
With this change, userfaultfd fails to build with undefined reference
swap() error:
userfaultfd.c: In function `userfaultfd_stress':
userfaultfd.c:1530:17: warning: implicit declaration of function `swap'; did you mean `swab'? [-Wimplicit-function-declaration]
1530 | swap(area_src, area_dst);
| ^~~~
| swab
/usr/bin/ld: /tmp/ccDGOAdV.o: in function `userfaultfd_stress':
userfaultfd.c:(.text+0x549e): undefined reference to `swap'
/usr/bin/ld: userfaultfd.c:(.text+0x54bc): undefined reference to `swap'
collect2: error: ld returned 1 exit status
Revert the commit to fix the problem.
Link: https://lkml.kernel.org/r/20220202003340.87195-1-skhan@linuxfoundation.org
Fixes: 2c769ed713 ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This program has only one file so most functions can be static.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220202150902.19563-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add some coverage of event generation to mixer-test. Rather than doing a
separate set of writes designed to trigger events we add a step to the
existing write_and_verify() which checks to see if the value we read back
from non-volatile controls matches the value before writing and that an
event is or isn't generated as appropriate. The "tests" for events then
simply check that no spurious or missing events were detected. This avoids
needing further logic to generate appropriate values for each control type
and maximises coverage.
When checking for events we use a timeout of 0. This relies on the kernel
generating any event prior to returning to userspace when setting a control.
That is currently the case and it is difficult to see it changing, if it
does the test will need to be updated. Using a delay of 0 means that we
don't slow things down unduly when checking for no event or when events
fail to be generated.
We don't check behaviour for volatile controls since we can't tell what
the behaviour is supposed to be for any given control.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220202150902.19563-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using tos 0x1 with 'ip route get <IPv4 address> ...' doesn't test much
of the tos option handling: 0x1 just sets an ECN bit, which is cleared
by inet_rtm_getroute() before doing the fib lookup. Let's use 0x10
instead, which is actually taken into account in the route lookup (and
is less surprising for the reader).
For consistency, use 0x10 for the IPv6 route lookup too (IPv6 currently
doesn't clear ECN bits, but might do so in the future).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/d61119e68d01ba7ef3ba50c1345a5123a11de123.1643815297.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although both iproute2 and the kernel accept 1 and 2 as tos values for
new routes, those are invalid. These values only set ECN bits, which
are ignored during IPv4 fib lookups. Therefore, no packet can actually
match such routes. This selftest therefore only succeeds because it
doesn't verify that the new routes do actually work in practice (it
just checks if the routes are offloaded or not).
It makes more sense to use tos values that don't conflict with ECN.
This way, the selftest won't be affected if we later decide to warn or
even reject invalid tos configurations for new routes.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/5e43b343720360a1c0e4f5947d9e917b26f30fbf.1643826556.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support",
fix uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qKvf
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
This Kselftest fixes update for Linux 5.17-rc3 consists of important
fixes to several tests and documentation clarification on running
mainline kselftest on stable releases. A few notable fixes:
- fix kselftest run hang due to child processes that haven't been
terminated. Fix signals all child processes
- fix false pass/fail results from vdso_test_abi, openat2, mincore
- build failures when using -j (multiple jobs) option
- exec test build failure due to incorrect build rule for a run-time
created "pipe"
- zram test fixes related to interaction with zram-generator to
make sure zram test to coordinate deleted with zram-generator
- zram test compression ratio calculation fix and skipping
max_comp_streams.
- increasing rtc test timeout
- cpufreq test to write test results to stdout which will necessary on
automated test systems
-----BEGIN PGP SIGNATURE-----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=rH2m
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Important fixes to several tests and documentation clarification on
running mainline kselftest on stable releases. A few notable fixes:
- fix kselftest run hang due to child processes that haven't been
terminated. Fix signals all child processes
- fix false pass/fail results from vdso_test_abi, openat2, mincore
- build failures when using -j (multiple jobs) option
- exec test build failure due to incorrect build rule for a run-time
created "pipe"
- zram test fixes related to interaction with zram-generator to make
sure zram test to coordinate deleted with zram-generator
- zram test compression ratio calculation fix and skipping
max_comp_streams.
- increasing rtc test timeout
- cpufreq test to write test results to stdout which will necessary
on automated test systems"
* tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix vdso_test_abi return status
selftests: skip mincore.check_file_mmap when fs lacks needed support
selftests: openat2: Skip testcases that fail with EOPNOTSUPP
selftests: openat2: Add missing dependency in Makefile
selftests: openat2: Print also errno in failure messages
selftests: futex: Use variable MAKE instead of make
selftests/exec: Remove pipe from TEST_GEN_FILES
selftests/zram: Adapt the situation that /dev/zram0 is being used
selftests/zram01.sh: Fix compression ratio calculation
selftests/zram: Skip max_comp_streams interface on newer kernel
docs/kselftest: clarify running mainline tests on stables
kselftest: signal all child processes
selftests: cpufreq: Write test output to stdout as well
selftests: rtc: Increase test timeout so that all tests run
Daniel Borkmann says:
====================
pull-request: bpf 2022-02-03
We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).
The main changes are:
1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
flag which otherwise trips over KASAN, from Hou Tao.
2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
rename, from Alexei Starovoitov.
3) Fix a possible race in inc_misses_counter() when IRQ would trigger
during counter update, from He Fengqing.
4) Fix tooling infra for cross-building with clang upon probing whether
gcc provides the standard libraries, from Jean-Philippe Brucker.
5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.
6) Drop unneeded and outdated lirc.h header copy from tooling infra as
BPF does not require it anymore, from Sean Young.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
tools: Ignore errors from `which' when searching a GCC toolchain
tools headers UAPI: remove stale lirc.h
bpf: Fix possible race in inc_misses_counter
bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================
Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to using new bpf_xdp_*() APIs across all selftests. Take
advantage of a more straightforward and user-friendly semantics of
old_prog_fd (0 means "don't care") in few places.
This is a redo of 544356524d ("selftests/bpf: switch to new libbpf XDP
APIs"), which was previously reverted to minimize conflicts during bpf
and bpf-next tree merge.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-6-andrii@kernel.org
Allow the ageing timeout that is set on bridges to be customized from
forwarding.config. This allows the tests to be run on hardware which
does not support a 10s timeout (e.g. mv88e6xxx).
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the fullmesh setting and clearing selftests in
mptcp_join.sh.
Now we can set both backup and fullmesh flags, so avoid using the
words 'backup' and 'bkup'.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the fullmesh flag setting and clearing support in
pm_nl_ctl:
# pm_nl_ctl set ip flags fullmesh
# pm_nl_ctl set ip flags nofullmesh
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_prog_test_run_xattr is being deprecated in favor of the OPTS-based
bpf_prog_test_run_opts.
We end up unable to use CHECK_ATTR so replace usages with ASSERT_* calls.
Also, prog_run_xattr is now prog_run_opts.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202235423.1097270-3-delyank@fb.com
bpf_prog_test_run is being deprecated in favor of the OPTS-based
bpf_prog_test_run_opts.
We end up unable to use CHECK in most cases, so replace usages with
ASSERT_* calls.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202235423.1097270-2-delyank@fb.com
We're missing the `f` prefix to have python do string interpolation, so
we'd never end up printing what the actual "unexpected" error is.
Fixes: ee92ed3836 ("kunit: add run_checks.py script to validate kunit changes")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kunit update for Linux 5.17-rc3 consists of a single fix to an error
seen on qemu due to a missing import.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmH5reYACgkQCwJExA0N
QxyTlRAA7CYxkE9UjeReUDHWllwI+/hMLqk06Xe+T/uUNlXJTnr7NBLbUI9896Ur
2LB7k+yP1h1tlimQFMH1SfzAQrSUdpwhX+IXN1/3oLgcXYCNeoEUhF7DfGXST1BX
mOd1Qr+GU/yIru7WfpRDxEZgjech9BnDlmuEi10ZF7uYyte49ZbyBIrR4VQjuSvb
SK2iHpdQk8/7TVoE2r6fTJW2n6LcFzlXCOi48jzBdBfSfeo8WFd9EK2DD9Y7PJSM
UjXQBEXGqae2Occu6+qqBZCRMR3sxxo3T7Ak01pAhzgEDDQjuKNFLhQHPti6bgYJ
VbMSaP7onuwIRBVSvoXeOnzjT6ozXXb+C0q406gE4vu71UAxD5E0k6wZuoh5q4xr
MKkACZbsEmylkTq+cQhe8LmdwEN3yhcjZ0cRsqvhSpwnpXVBb4yUSyIyGJesSQkS
JvCxKaCm+wnCyr3xZL+PXK0tfEqTt53wMeVRG0PlMd+zBdxoZo4KbNlX1I2klV9H
Mi5J2mUsyoGFaJp3MOqFNTn3WQ3jFNOFFKlFhlUHzsm72Nth4GnBC1W95QxKNAOG
Peut78LWVdlCcgnN7IPXL1/MZLUVC0WMf7Q6UbMQCZy+dK6RPIzliN5Fipmah2Re
BpH5E0UycoL7NJo8aFhavSm+LbzYa+cFrEVCeXRLDxjjuqRwTso=
=maDS
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"A single fix to an error seen on qemu due to a missing import"
* tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Import missing importlib.abc
Test that PERF_EVENT_IOC_MODIFY_ATTRIBUTES correctly modifies
perf_event_attr::sig_data as well.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-2-elver@google.com
Rather than use rseq_get_abi() and pass its result through a register to
the inline assembler, directly access the per-thread rseq area through a
memory reference combining the %gs segment selector, the constant offset
of the field in struct rseq, and the rseq_offset value (in a register).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-16-mathieu.desnoyers@efficios.com
Rather than use rseq_get_abi() and pass its result through a register to
the inline assembler, directly access the per-thread rseq area through a
memory reference combining the %fs segment selector, the constant offset
of the field in struct rseq, and the rseq_offset value (in a register).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-15-mathieu.desnoyers@efficios.com
The arm and mips work-around for asm goto size guess issues are not
properly documented, and lack reference to specific compiler versions,
upstream compiler bug tracker entry, and reproducer.
I can only find a loosely documented patch in my original LKML rseq post
refering to gcc < 7 on ARM, but it does not appear to be sufficient to
track the exact issue. Also, I am not sure MIPS really has the same
limitation.
Therefore, remove the work-around until we can properly document this.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20171121141900.18471-17-mathieu.desnoyers@efficios.com/
The semantic of off_t is for file offsets. We mean to use it as an
offset from a pointer. We really expect it to fit in a single register,
and not use a 64-bit type on 32-bit architectures.
Fix runtime issues on ppc32 where the offset is always 0 due to
inconsistency between the argument type (off_t -> 64-bit) and type
expected by the inline assembler (32-bit).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-11-mathieu.desnoyers@efficios.com
Building the rseq basic test with
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)
Target: powerpc-linux-gnu
leads to these errors:
/tmp/ccieEWxU.s: Assembler messages:
/tmp/ccieEWxU.s:118: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:118: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:121: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:121: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:626: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:626: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:629: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:629: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:735: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:735: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:738: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:738: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:741: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:741: Error: junk at end of line: `,8'
Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed
Based on discussion with Linux powerpc maintainers and review of
the use of the "m" operand in powerpc kernel code, add the missing
%Un%Xn (where n is operand number) to the lwz, stw, ld, and std
instructions when used with "m" operands.
Using "WORD" to mean either a 32-bit or 64-bit type depending on
the architecture is misleading. The term "WORD" really means a
32-bit type in both 32-bit and 64-bit powerpc assembler. The intent
here is to wrap load/store to intptr_t into common macros for both
32-bit and 64-bit.
Rename the macros with a RSEQ_ prefix, and use the terms "INT"
for always 32-bit type, and "LONG" for architecture bitness-sized
type.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-10-mathieu.desnoyers@efficios.com
ppc32 incorrectly uses padding as rseq_cs pointer field. Fix this by
using the rseq_cs.arch.ptr field.
Use this field across all architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-9-mathieu.desnoyers@efficios.com
glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread
data in the TCB, accessible at an offset from the thread pointer, rather
than through an actual Thread-Local Storage (TLS) variable, as the
Linux kernel selftests initially expected.
The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot
actively coexist in a process, because the kernel supports only a single
rseq registration per thread.
Here is the scheme introduced to ensure selftests can work both with an
older glibc and with glibc-2.35+:
- librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI.
- librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size,
__rseq_flags) using dlsym() in a librseq library constructor. If those
are found, copy their values into rseq_offset, rseq_size, and
rseq_flags.
- Else, if those glibc symbols are not found, handle rseq registration
from librseq and use its own IE-model TLS to implement the rseq ABI
per-thread storage.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-8-mathieu.desnoyers@efficios.com
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer.
The toolchains do not implement accessing the thread pointer on all
architectures. Provide thread pointer getters for ppc and x86 which
lack (or lacked until recently) toolchain support.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-7-mathieu.desnoyers@efficios.com
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer, rather than through an actual
Thread-Local Storage (TLS) variable, as the kernel selftests initially
expected.
Introduce a rseq_get_abi() helper, initially using the __rseq_abi
TLS variable, in preparation for changing this userspace ABI for one
which is compatible with glibc-2.35.
Note that the __rseq_abi TLS and glibc-2.35's ABI for per-thread data
cannot actively coexist in a process, because the kernel supports only
a single rseq registration per thread.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-6-mathieu.desnoyers@efficios.com
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
All accesses to the __rseq_abi fields are volatile, but remove the
volatile from the TLS variable declaration, otherwise we are stuck with
volatile for the upcoming rseq_get_abi() helper.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-5-mathieu.desnoyers@efficios.com
The Linux kernel rseq uapi header has a broken layout for the
rseq_cs.ptr field on 32-bit little endian architectures. The entire
rseq_cs.ptr field is planned for removal, leaving only the 64-bit
rseq_cs.ptr64 field available.
Both glibc and librseq use their own copy of the Linux kernel uapi
header, where they introduce proper union fields to access to the 32-bit
low order bits of the rseq_cs pointer on 32-bit architectures.
Introduce a copy of the Linux kernel uapi headers in the Linux kernel
selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-2-mathieu.desnoyers@efficios.com
The torture-test scripting's long-standing use of KVM as the environment
variable tracking the pathname of the rcutorture directory now conflicts
with allmodconfig builds due to the virt/kvm/Makefile.kvm file's use
of this as a makefile variable. This commit therefore changes the
torture-test scripting from KVM to RCUTORTURE, avoiding the name conflict.
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, an obtuse compiler diagnostic can fool kvm-find-errors.sh
into believing that the build was successful. This commit therefore
adds a check for a missing vmlinux file. Note that in the case of
repeated torture-test scenarios ("--configs '2*TREE01'"), the vmlinux
file will only be present in the first directory, that is, in TREE01
but not TREE01.2.
Link: https://lore.kernel.org/lkml/36bd91e4-8eda-5677-7fde-40295932a640@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture.sh scripts currently duplicates the summary lines, getting
one during the run phase and one during the summary phase of each run.
This commit therefore removes the run phase from consideration so as to
get only one summary line per run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit ups the retries for downloading the build-product tarball
to a given remote system from once to five times, the better to handle
transient network failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Compressing KASAN vmlinux files reduces torture.sh res file size from
about 100G to about 50G, which is good, but the KCSAN vmlinux files
are also large. Compressing them reduces their size from about 700M to
about 100M (but of course your mileage may vary). This commit therefore
compresses both KASAN and KCSAN vmlinux files.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further improves torture.sh run summaries by indicating
which runs' "Bugs:" counts are all KCSAN reports, and further printing
an additional end-of-run summary line when all errors reported in all
runs were KCSAN reports.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Runs having only KCSAN reports will normally print a summary line
containing only a "Bugs:" entry. However, these bugs might or might
not be KCSAN reports. This commit therefore flags runs in which all the
"Bugs:" entries are KCSAN reports.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh lists the failed runs, but it is up to the user
to work out what failed. This is especially annoying for KCSAN runs,
where RCU's tighter definitions result in failures being reported for
other parts of the kernel. This commit therefore outputs "Summary:"
lines for each failed run, allowing the user to more quickly identify
which failed runs need focused attention.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In a clear-cut case of "not thinking big enough", kvm.sh limits the
multipliers for torture-test scenarios to three digits. Although this is
large enough for any single system that I have ever run rcutorture on,
it does become a problem when you want to use kvm-remote.sh to run as
many instances of TREE09 as fit on a set of 20 systems with 80 CPUs each.
Yes, one could simply say "--configs '800*TREE09 800*TREE09'", but this
commit removes the need for that sort of hacky workaround by permitting
four-digit repetition numbers, thus allowing "--configs '1600*TREE09'".
Five-digit repetition numbers remain off the menu. Should they ever
really be needed, they can easily be added!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Console logs can sometimes have trailing control-M characters, which the
forward-progress evaluation code in kvm-recheck-rcu.sh passes through
to the user output. Which does not cause a technical problem, but which
can look ugly. This commit therefore strips the control-M characters.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Run sysctl in quiet mode. Echoing the modified sysctl doesn't bring any
useful information.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers of fib_rule6_test_match_n_redirect() and
fib_rule4_test_match_n_redirect() pass a third argument containing a
description of the test being run. Instead of ignoring this argument,
let's use it for logging instead of printing a truncated version of the
command.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fib_rule6_del_by_pref() and fib_rule4_del_by_pref() functions use
an uninitialised $TABLE variable. They should use $RTABLE instead.
This doesn't alter the result of the test, as it just makes the grep
command less specific (but since the script always uses the same table
number, that doesn't really matter).
Let's fix it anyway and, while there, specify the filtering parameters
directly in 'ip -X rule show' to avoid the extra grep command entirely.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's restrict the scope of these variables to avoid possible
interferences.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add coverage to the verifier tests and tests for reading bpf_sock fields to
ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed
only at intended offsets and produce expected values.
While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit
wide loads need be allowed and produce a zero-padded 16-bit value for
backward compatibility.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This field is only used to pass along the parsed Test object from
parse_tests().
Everywhere else the `result` field is ignored.
Instead make parse_tests() explicitly return a KunitResult and Test so
we can retire the `result` field.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
vdso_test_abi contains a batch of tests that verify the validity of the
vDSO ABI.
When a vDSO symbol is not found the relevant test is skipped reporting
KSFT_SKIP. All the tests return values are then added in a single
variable which is checked to verify failures. This approach can have
side effects which result in reporting the wrong kselftest exit status.
Fix vdso_test_abi verifying the return code of each test separately.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
timestamping checks socket options during initialisation. For the field
bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if
PHC is not bound. Actually the value of bind_phc is 0 if PHC is not
bound. This results in the following output:
SIOCSHWTSTAMP: tx_type 0 requested, got 0; rx_filter 0 requested, got 0
SO_TIMESTAMP 0
SO_TIMESTAMPNS 0
SO_TIMESTAMPING flags 0, bind phc 0
not expected, flags 0, bind phc -1
This is fixed by setting default value and expected value of bind_phc to
0.
Fixes: 2214d70324 ("selftests/net: timestamping: support binding PHC")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited commits replaced preemptible with pagefault_disabled and
flush_kernel_dcache_page with flush_dcache_page respectively, hence need
to update the corresponding defines in the test.
scatterlist.c: In function ‘sg_miter_stop’:
scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration]
flush_dcache_page(miter->page);
^~~~~~~~~~~~~~~~~
In file included from linux/scatterlist.h:8:0,
from scatterlist.c:9:
scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration]
WARN_ON_ONCE(!pagefault_disabled());
^
linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’
int __ret_warn_on = !!(condition); \
^~~~~~~~~
Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com
Fixes: 723aca2085 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()")
Fixes: 0e84f5dbf8 ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Errata workarounds for Cortex-A510: broken hardware dirty bit
management, detection code for the TRBE (tracing) bugs with the actual
fixes going in via the CoreSight tree.
- Cortex-X2 errata handling for TRBE (inheriting the workarounds from
Cortex-A710).
- Fix ex_handler_load_unaligned_zeropad() to use the correct struct
members.
- A couple of kselftest fixes for FPSIMD.
- Silence the vdso "no previous prototype" warning.
- Mark start_backtrace() notrace and NOKPROBE_SYMBOL.
-----BEGIN PGP SIGNATURE-----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=D11O
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Errata workarounds for Cortex-A510: broken hardware dirty bit
management, detection code for the TRBE (tracing) bugs with the
actual fixes going in via the CoreSight tree.
- Cortex-X2 errata handling for TRBE (inheriting the workarounds from
Cortex-A710).
- Fix ex_handler_load_unaligned_zeropad() to use the correct struct
members.
- A couple of kselftest fixes for FPSIMD.
- Silence the vdso "no previous prototype" warning.
- Mark start_backtrace() notrace and NOKPROBE_SYMBOL.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: List early Cortex-A510 parts as having broken dbm
kselftest/arm64: Correct logging of FPSIMD register read via ptrace
kselftest/arm64: Skip VL_INHERIT tests for unsupported vector types
arm64: errata: Add detection for TRBE trace data corruption
arm64: errata: Add detection for TRBE invalid prohibited states
arm64: errata: Add detection for TRBE ignored system register writes
arm64: Add Cortex-A510 CPU part definition
arm64: extable: fix load_unaligned_zeropad() reg indices
arm64: Mark start_backtrace() notrace and NOKPROBE_SYMBOL
arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges
arm64: Add Cortex-X2 CPU part definition
arm64: vdso: Fix "no previous prototype" warning
* Redo incorrect fix for SEV/SMAP erratum
* Windows 11 Hyper-V workaround
Other x86 changes:
* Various x86 cleanups
* Re-enable access_tracking_perf_test
* Fix for #GP handling on SVM
* Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
* Fix for ICEBP in interrupt shadow
* Avoid false-positive RCU splat
* Enable Enlightened MSR-Bitmap support for real
ARM:
* Correctly update the shadow register on exception injection when
running in nVHE mode
* Correctly use the mm_ops indirection when performing cache invalidation
from the page-table walker
* Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
* Dead code cleanup
There will be another pull request for ARM fixes next week, but
those patches need a bit more soak time.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHz5eIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv4wgAopj0Zlutrrtw3KT4/XnmSdMPgN0j
jQNzysSLTO5wGQCEogycjYXkGUDFu1Gdi+K91QAyjeKja20pIhPLeS2CBDRJyOc5
73K7sxqz51JnQiVFzkTuA+qzn+lXaJ9LUXtdg8BnQMSKyt2AJOqE8uT10kcYOD5q
mW4V3QUA0QpVKN0cYHv/G/zvBwQGGSLZetFbuAzwH2EDTpIi1aio5ZN1r0AoH18L
2x5kYPpqmnoBvo2cB4b7SNmxv3ZPQ5K+wta0uwZ4pO+UuYiRd84RPr5lErywJC3w
nci0eC0DoXrC6h+35UItqM8RqAGv6LADbDnr1RGojmfogSD0OtbX8y3hjw==
=iKnI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
There's a cut'n'paste error in the logging for our test for reading register
state back via ptrace, correctly say that we did a read instead of a write.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220124175527.3260234-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we unconditionally test the ability to set the vector length
inheritance flag via ptrace meaning that we generate false failures on
systems that don't support SVE when we attempt to set the vector length
there. Check the hwcap and mark the tests as skipped when it's not present.
Fixes: 0ba1ce1e86 ("selftests: arm64: Add coverage of ptrace flags for SVE VL inheritance")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220124175527.3260234-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use temp netns instead of hard code name for testing in case the
netns already exists.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20220125081717.1260849-8-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use temp netns instead of hard code name for testing in case the
netns already exists.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/r/20220125081717.1260849-6-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use temp netns instead of hard code name for testing in case the netns
already exists.
Remove the hard code interface index when creating the veth interfaces.
Because when the system loads some virtual interface modules, e.g. tunnels.
the ifindex of 2 will be used and the cmd will fail.
As the netns has not created if checking environment failed. Trap the
clean up function after checking env.
Fixes: 8955c1a329 ("selftests/bpf/xdp_redirect_multi: Limit the tests in netns")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20220125081717.1260849-2-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Remove leftovers from flowtable modules, from Geert Uytterhoeven.
2) Missing refcount increment of conntrack template in nft_ct,
from Florian Westphal.
3) Reduce nft_zone selftest time, also from Florian.
4) Add selftest to cover stateless NAT on fragments, from Florian Westphal.
5) Do not set net_device when for reject packets from the bridge path,
from Phil Sutter.
6) Cancel register tracking info on nft_byteorder operations.
7) Extend nft_concat_range selftest to cover set reload with no elements,
from Florian Westphal.
8) Remove useless update of pointer in chain blob builder, reported
by kbuild test robot.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nf_tables: remove assignment with no effect in chain blob builder
selftests: nft_concat_range: add test for reload with no element add/del
netfilter: nft_byteorder: track register operations
netfilter: nft_reject_bridge: Fix for missing reply from prerouting
selftests: netfilter: check stateless nat udp checksum fixup
selftests: netfilter: reduce zone stress test running time
netfilter: nft_ct: fix use after free when attaching zone template
netfilter: Remove flowtable relics
====================
Link: https://lore.kernel.org/r/20220127235235.656931-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying
filesystem lacks support of O_TMPFILE or fallocate since such failures
are not really related to mincore functionality.
Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Skip testcases that fail since the requested valid flags combination is not
supported by the underlying filesystem.
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a dependency on header helpers.h to the main target; while at that add
to helpers.h also a missing include for bool types.
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In E_func() macro, on error, print also errno in order to aid debugging.
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:
make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The uapi btf.h contains the following declaration:
struct btf_decl_tag {
__s32 component_idx;
};
The skeleton will also generate a struct with name
"btf_decl_tag" for bpf program btf_decl_tag.c.
Rename btf_decl_tag.c to test_btf_decl_tag.c so
the corresponding skeleton struct name becomes
"test_btf_decl_tag". This way, we could include
uapi btf.h in prog_tests/btf_tag.c.
There is no functionality change for this patch.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220127154611.656699-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - new code bugs:
- tcp: add a missing sk_defer_free_flush() in tcp_splice_read()
- tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n
- nf_tables: set last expression in register tracking area
- nft_connlimit: fix memleak if nf_ct_netns_get() fails
- mptcp: fix removing ids bitmap setting
- bonding: use rcu_dereference_rtnl when getting active slave
- fix three cases of sleep in atomic context in drivers: lan966x, gve
- handful of build fixes for esoteric drivers after netdev->dev_addr
was made const
Previous releases - regressions:
- revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke
Linux compatibility with USGv6 tests
- procfs: show net device bound packet types
- ipv4: fix ip option filtering for locally generated fragments
- phy: broadcom: hook up soft_reset for BCM54616S
Previous releases - always broken:
- ipv4: raw: lock the socket in raw_bind()
- ipv4: decrease the use of shared IPID generator to decrease the
chance of attackers guessing the values
- procfs: fix cross-netns information leakage in /proc/net/ptype
- ethtool: fix link extended state for big endian
- bridge: vlan: fix single net device option dumping
- ping: fix the sk_bound_dev_if match in ping_lookup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mwR3
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- tcp: add a missing sk_defer_free_flush() in tcp_splice_read()
- tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n
- nf_tables: set last expression in register tracking area
- nft_connlimit: fix memleak if nf_ct_netns_get() fails
- mptcp: fix removing ids bitmap setting
- bonding: use rcu_dereference_rtnl when getting active slave
- fix three cases of sleep in atomic context in drivers: lan966x, gve
- handful of build fixes for esoteric drivers after netdev->dev_addr
was made const
Previous releases - regressions:
- revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke
Linux compatibility with USGv6 tests
- procfs: show net device bound packet types
- ipv4: fix ip option filtering for locally generated fragments
- phy: broadcom: hook up soft_reset for BCM54616S
Previous releases - always broken:
- ipv4: raw: lock the socket in raw_bind()
- ipv4: decrease the use of shared IPID generator to decrease the
chance of attackers guessing the values
- procfs: fix cross-netns information leakage in /proc/net/ptype
- ethtool: fix link extended state for big endian
- bridge: vlan: fix single net device option dumping
- ping: fix the sk_bound_dev_if match in ping_lookup"
* tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
net: bridge: vlan: fix memory leak in __allowed_ingress
net: socket: rename SKB_DROP_REASON_SOCKET_FILTER
ipv4: remove sparse error in ip_neigh_gw4()
ipv4: avoid using shared IP generator for connected sockets
ipv4: tcp: send zero IPID in SYNACK messages
ipv4: raw: lock the socket in raw_bind()
MAINTAINERS: add missing IPv4/IPv6 header paths
MAINTAINERS: add more files to eth PHY
net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()
net: bridge: vlan: fix single net device option dumping
net: stmmac: skip only stmmac_ptp_register when resume from suspend
net: stmmac: configure PTP clock source prior to PTP initialization
Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values"
connector/cn_proc: Use task_is_in_init_pid_ns()
pid: Introduce helper task_is_in_init_pid_ns()
gve: Fix GFP flags when allocing pages
net: lan966x: Fix sleep in atomic context when updating MAC table
net: lan966x: Fix sleep in atomic context when injecting frames
ethernet: seeq/ether3: don't write directly to netdev->dev_addr
ethernet: 8390/etherh: don't write directly to netdev->dev_addr
...
pipe named FIFO special file is being created in execveat.c to perform
some tests. Makefile doesn't need to do anything with the pipe. When it
isn't found, Makefile generates the following build error:
make: *** No rule to make target
'../tools/testing/selftests/exec/pipe', needed by 'all'. Stop.
pipe is created and removed during test run-time.
Amended change log to add pipe remove info:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 61016db15b ("selftests/exec: Verify execve of non-regular files fail")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.
The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.
We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.
orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk
Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since commit 43209ea2d1 ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.
The code that comparing kernel version is from xfstests testsuite ext4/053.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building selftests/bpf with clang
make -j LLVM=1
make -C tools/testing/selftests/bpf -j LLVM=1
I hit the following compilation error:
trace_helpers.c:152:9: error: variable 'found' is used uninitialized whenever 'while' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized]
while (fscanf(f, "%zx-%zx %s %zx %*[^\n]\n", &start, &end, buf, &base) == 4) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
trace_helpers.c:161:7: note: uninitialized use occurs here
if (!found)
^~~~~
trace_helpers.c:152:9: note: remove the condition if it is always true
while (fscanf(f, "%zx-%zx %s %zx %*[^\n]\n", &start, &end, buf, &base) == 4) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1
trace_helpers.c:145:12: note: initialize the variable 'found' to silence this warning
bool found;
^
= false
It is possible that for sane /proc/self/maps we may never hit the above issue
in practice. But let us initialize variable 'found' properly to silence the
compilation error.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220127163726.1442032-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 710ad98c36 ("veth: Do not record rx queue hint in veth_xmit"),
veth no longer receives traffic on the same queue as it was sent on. This
breaks the bpf_res test for the AF_XDP selftests as the socket tied to
queue 1 will not receive traffic anymore.
Modify the test so that two sockets are tied to queue id 0 using a shared
umem instead. When killing the first socket enter the second socket into
the xskmap so that traffic will flow to it. This will still test that the
resources are not cleaned up until after the second socket dies, without
having to rely on veth supporting rx_queue hints.
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220125082945.26179-1-magnus.karlsson@gmail.com
Fix how selftests determine relative offset of a function that is
uprobed. Previously, there was an assumption that uprobed function is
always in the first executable region, which is not always the case
(libbpf CI hits this case now). So get_base_addr() approach in isolation
doesn't work anymore. So teach get_uprobe_offset() to determine correct
memory mapping and calculate uprobe offset correctly.
While at it, I merged together two implementations of
get_uprobe_offset() helper, moving powerpc64-specific logic inside (had
to add extra {} block to avoid unused variable error for insn).
Also ensured that uprobed functions are never inlined, but are still
static (and thus local to each selftest), by using a no-op asm volatile
block internally. I didn't want to keep them global __weak, because some
tests use uprobe's ref counter offset (to test USDT-like logic) which is
not compatible with non-refcounted uprobe. So it's nicer to have each
test uprobe target local to the file and guaranteed to not be inlined or
skipped by the compiler (which can happen with static functions,
especially if compiling selftests with -O2).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220126193058.3390292-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a specific test for the reload issue fixed with
commit 23c54263ef ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").
Add to set, then flush set content + restore without other add/remove in
the transaction.
On kernels before the fix, this test case fails:
net,mac with reload [FAIL]
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.
On kernels without
commit 4e1860a386 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:
cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)
On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This selftests needs almost 3 minutes to complete, reduce the
insertes zones to 1000. Test now completes in about 20 seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Compiling kernel and selftests/bpf with latest llvm like blow:
make -j LLVM=1
make -C tools/testing/selftests/bpf -j LLVM=1
I hit the following compilation error:
/.../prog_tests/log_buf.c:215:6: error: variable 'log_buf' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!ASSERT_OK_PTR(raw_btf_data, "raw_btf_data_good"))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/.../prog_tests/log_buf.c:264:7: note: uninitialized use occurs here
free(log_buf);
^~~~~~~
/.../prog_tests/log_buf.c:215:2: note: remove the 'if' if its condition is always false
if (!ASSERT_OK_PTR(raw_btf_data, "raw_btf_data_good"))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/.../prog_tests/log_buf.c:205:15: note: initialize the variable 'log_buf' to silence this warning
char *log_buf;
^
= NULL
1 error generated.
Compiler rightfully detected that log_buf is uninitialized in one of failure path as indicated
in the above.
Proper initialization of 'log_buf' variable fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220126181940.4105997-1-yhs@fb.com
There is no need for tests other than amx_test to enable dynamic xsave
states. Remove the call to vm_xsave_req_perm from generic code,
and move it inside the test. While at it, allow customizing the bit
that is requested, so that future tests can use it differently.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't skip the vmcall() in l2_guest_code() prior to re-entering L2, doing
so will result in L2 running to completion, popping '0' off the stack for
RET, jumping to address '0', and ultimately dying with a triple fault
shutdown.
It's not at all obvious why the test re-enters L2 and re-executes VMCALL,
but presumably it serves a purpose. The VMX path doesn't skip vmcall(),
and the test can't possibly have passed on SVM, so just do what VMX does.
Fixes: d951b2210c ("KVM: selftests: smm_test: Test SMM enter from L2")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220125221725.2101126-1-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attempt to write various invalid values for control types we know about and
check that something sensible happens. The ABI isn't quite as clearly
defined as one might like, rather than generating an error when an invalid
value is written many devices will silently rewrite the value into one that
is valid for the control. The exact value chosen is not predictable so in
the case the write succeeds we just check that the value we read back is
one that is valid for the control.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220125162824.3816659-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Originally, the kernel strictly checked the size of the optval in
getsockopt(TCP_ZEROCOPY_RECEIVE) to be equal to sizeof(struct
tcp_zerocopy_receive). With c8856c0514, this was changed to allow
optvals of different sizes.
The bpf code in the sockopt_sk test was still performing the strict size
check. This fix adapts the kernel behavior from c8856c0514 in the
selftest, i.e., just check if the required fields are there.
Fixes: 9cacf81f81 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/6f569cca2e45473f9a724d54d03fdfb45f29e35f.1643129402.git.fmaurer@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The lirc.h file is an old copy of lirc.h from the kernel sources. It is
out of date, and the bpf lirc tests don't need a new copy anyway. As
long as /usr/include/linux/lirc.h is from kernel v5.2 or newer, the tests
will compile fine.
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220124153028.394409-1-sean@mess.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.
Here we group all its child processes so that kill() can signal all of
them in timeout.
Fixed change log: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use 'tee' to send the test output to stdout in addition to the current
output file. This makes the output easier to handle in automated test
systems and is superior to only later dumping the output file contents
to stdout, since this way the test output can be interleaved with other
log messages, like from the kernel, so that chronology is preserved,
making it easier to detect issues.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.
However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.
In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.
Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:
./run_kselftest.sh -c rtc
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Python 3.10.0 contains:
9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)")
It causes importlib.util to no longer import importlib.abs, which leads
to the following error when trying to use kunit with qemu:
AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'?
Add the missing import.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This selftest was accidentally removed by commit 6a58150859
("selftest: KVM: Add intra host migration tests"). Add it back.
Fixes: 6a58150859 ("selftest: KVM: Add intra host migration tests")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220120003826.2805036-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the helper to set up SYS_PREFIX for fentry and kprobe selftests
that use __x86_sys_* attach functions.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220124141622.4378-2-Kenta.Tada@sony.com
This adds a test for bpf iterator programs to make use of sleepable
bpf helpers.
Signed-off-by: Kenny Yu <kennyyu@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124185403.468466-5-kennyyu@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-01-24
We've added 80 non-merge commits during the last 14 day(s) which contain
a total of 128 files changed, 4990 insertions(+), 895 deletions(-).
The main changes are:
1) Add XDP multi-buffer support and implement it for the mvneta driver,
from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen.
2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc
infra, from Kumar Kartikeya Dwivedi.
3) Extend BPF cgroup programs to export custom ret value to userspace via
two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu.
4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima.
5) Complete missing UAPI BPF helper description and change bpf_doc.py script
to enforce consistent & complete helper documentation, from Usama Arif.
6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to
follow tc-based APIs, from Andrii Nakryiko.
7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu.
8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters
and setters, from Christy Lee.
9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to
reduce overhead, from Kui-Feng Lee.
10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new()
utility function, from Mauricio Vásquez.
11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau.
12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits)
selftests, bpf: Do not yet switch to new libbpf XDP APIs
selftests, xsk: Fix rx_full stats test
bpf: Fix flexible_array.cocci warnings
xdp: disable XDP_REDIRECT for xdp frags
bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags
bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest
net: xdp: introduce bpf_xdp_pointer utility routine
bpf: generalise tail call map compatibility check
libbpf: Add SEC name for xdp frags programs
bpf: selftests: update xdp_adjust_tail selftest to include xdp frags
bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature
bpf: introduce frags support to bpf_prog_test_run_xdp()
bpf: move user_size out of bpf_test_init
bpf: add frags support to xdp copy helpers
bpf: add frags support to the bpf_xdp_adjust_tail() API
bpf: introduce bpf_xdp_get_buff_len helper
net: mvneta: enable jumbo frames if the loaded XDP program support frags
bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program
net: mvneta: add frags support to XDP_TX
xdp: add frags support to xdp_return_{buff/frame}
...
====================
Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert commit 544356524d ("selftests/bpf: switch to new libbpf XDP APIs")
for now given this will heavily conflict with 4b27480dca ("bpf/selftests:
convert xdp_link test to ASSERT_* macros") upon merge. Andrii agreed to redo
the conversion cleanly after trees merged.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Fix the rx_full stats test so that it correctly reports pass even when
the fill ring is not full of buffers.
Fixes: 872a1184db ("selftests: xsk: Put the same buffer only once in the fill ring")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20220121123508.12759-1-magnus.karlsson@gmail.com
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
The IOAM queue-depth data field was added a few weeks ago,
but the test unit was not updated accordingly.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: b63c5478e9 ("ipv6: ioam: Support for Queue depth data field")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://lore.kernel.org/r/20220121173449.26918-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change adds test cases for the xdp frags scenarios when shrinking
and growing.
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/d2e6a0ebc52db6f89e62b9befe045032e5e0a5fe.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds support for frags for the following helpers:
- bpf_xdp_output()
- bpf_perf_event_output()
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/340b4a99cdc24337b40eaf8bb597f9f9e7b0373e.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test for querying progs attached to sockmap. we use an existing
libbpf query interface to query prog cnt before and after progs
attaching to sockmap and check whether the queried prog id is right.
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220119014005.1209-2-zhudi2@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch to using new bpf_xdp_*() APIs across all selftests. Take
advantage of a more straightforward and user-friendly semantics of
old_prog_fd (0 means "don't care") in few places.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120061422.2710637-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enact deprecation of legacy BPF map definition in SEC("maps") ([0]). For
the definitions themselves introduce LIBBPF_STRICT_MAP_DEFINITIONS flag
for libbpf strict mode. If it is set, error out on any struct
bpf_map_def-based map definition. If not set, libbpf will print out
a warning for each legacy BPF map to raise awareness that it goes away.
For any use of BPF_ANNOTATE_KV_PAIR() macro providing a legacy way to
associate BTF key/value type information with legacy BPF map definition,
warn through libbpf's pr_warn() error message (but don't fail BPF object
open).
BPF-side struct bpf_map_def is marked as deprecated. User-space struct
bpf_map_def has to be used internally in libbpf, so it is left
untouched. It should be enough for bpf_map__def() to be marked
deprecated to raise awareness that it goes away.
bpftool is an interesting case that utilizes libbpf to open BPF ELF
object to generate skeleton. As such, even though bpftool itself uses
full on strict libbpf mode (LIBBPF_STRICT_ALL), it has to relax it a bit
for BPF map definition handling to minimize unnecessary disruptions. So
opt-out of LIBBPF_STRICT_MAP_DEFINITIONS for bpftool. User's code that
will later use generated skeleton will make its own decision whether to
enforce LIBBPF_STRICT_MAP_DEFINITIONS or not.
There are few tests in selftests/bpf that are consciously using legacy
BPF map definitions to test libbpf functionality. For those, temporary
opt out of LIBBPF_STRICT_MAP_DEFINITIONS mode for the duration of those
tests.
[0] Closes: https://github.com/libbpf/libbpf/issues/272
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120060529.1890907-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Converted few remaining legacy BPF map definition to BTF-defined ones.
For the remaining two bpf_map_def-based legacy definitions that we want
to keep for testing purposes until libbpf 1.0 release, guard them in
pragma to suppres deprecation warnings which will be added in libbpf in
the next commit.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120060529.1890907-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's very easy to miss compilation warnings without -Werror, which is
not set for selftests. libbpf and bpftool are already strict about this,
so make selftests/bpf also treat compilation warnings as errors to catch
such regressions early.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120060529.1890907-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
MPJ ipv6 selftests currently lack per link route to the server
net. Additionally, ipv6 subflows endpoints are created without any
interface specified. The end-result is that in ipv6 self-tests
subflows are created all on the same link, leading to expected delays
and sporadic self-tests failures.
Fix the issue by adding the missing setup bits.
Fixes: 523514ed0a ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Reported-and-tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some users have complained that selftests fail to build when
CONFIG_NF_CONNTRACK=m. It would be useful to allow building as long as
it is set to module or built-in, even though in case of building as
module, user would need to load it before running the selftest. Note
that this also allows building selftest when CONFIG_NF_CONNTRACK is
disabled.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220120164932.2798544-1-memxor@gmail.com
The bind_perm BPF selftest failed when port 111/tcp was already in use
during the test. To fix this, the test now runs in its own network name
space.
To use unshare, it is necessary to reorder the includes. The style of
the includes is adapted to be consistent with the other prog_tests.
v2: Replace deprecated CHECK macro with ASSERT_OK
Fixes: 8259fdeb30 ("selftests/bpf: Verify that rebinding to port < 1024 from BPF works")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/551ee65533bb987a43f93d88eaf2368b416ccd32.1642518457.git.fmaurer@redhat.com
The following warning appears when executing
make -C tools/testing/selftests/kvm
include/x86_64/processor.h:290:2: warning: 'ecx' may be used uninitialized in this
function [-Wmaybe-uninitialized]
asm volatile("cpuid"
^~~
lib/x86_64/processor.c:1523:21: note: 'ecx' was declared here
uint32_t eax, ebx, ecx, edx, max_ext_leaf;
Just initialize ecx to remove this warning.
Fixes: c8cc43c1ea ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119140325.59369-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following warning appears when executing
make -C tools/testing/selftests/kvm
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_intel_br_retired':
x86_64/pmu_event_filter_test.c:241:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
241 | struct kvm_cpuid2 *cpuid;
| ^~~~~
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_amd_zen_br_retired':
x86_64/pmu_event_filter_test.c:258:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
258 | struct kvm_cpuid2 *cpuid;
| ^~~~~
Just delete the unused variables to stay away from warnings.
Fixes: dc7e75b3b3ee ("selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTER")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119133910.56285-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
As the sched:sched_switch tracepoint args are derived from the kernel,
we'd better make it same with the kernel. So the macro TASK_COMM_LEN is
converted to type enum, then all the BPF programs can get it through
BTF.
The BPF program which wants to use TASK_COMM_LEN should include the
header vmlinux.h. Regarding the test_stacktrace_map and
test_tracepoint, as the type defined in linux/bpf.h are also defined in
vmlinux.h, so we don't need to include linux/bpf.h again.
Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The tests would break without this patch, because at one point it calls
getsockopt(fd, SOL_TCP, TCP_ZEROCOPY_RECEIVE, &buf, &optlen)
This getsockopt receives the kernel-set -EINVAL. Prior to this patch
series, the eBPF getsockopt hook's -EPERM would override kernel's
-EINVAL, however, after this patch series, return 0's automatic
-EPERM will not; the eBPF prog has to explicitly bpf_set_retval(-EPERM)
if that is wanted.
I also removed the explicit mentions of EPERM in the comments in the
prog.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/4f20b77cb46812dbc2bdcd7e3fa87c7573bde55e.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tests checks how different ways of interacting with the helpers
(getting retval, setting EUNATCH, EISCONN, and legacy reject
returning 0 without setting retval), produce different results in
both the setsockopt syscall and the retval returned by the helper.
A few more tests verify the interaction between the retval of the
helper and the retval in getsockopt context.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/43ec60d679ae3f4f6fd2460559c28b63cb93cd12.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
amx_test's binary should be present in the .gitignore file for the git
to ignore it.
Fixes: bf70636d94 ("selftest: kvm: Add amx selftest")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220118122053.1941915-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VMX specific test to verify that KVM doesn't explode if userspace
attempts KVM_RUN when emulation is required with a pending exception.
KVM VMX's emulation support for !unrestricted_guest punts exceptions to
userspace instead of attempting to synthesize the exception with all the
correct state (and stack switching, etc...).
Punting is acceptable as there's never been a request to support
injecting exceptions when emulating due to invalid state, but KVM has
historically assumed that userspace will do the right thing and either
clear the exception or kill the guest. Deliberately do the opposite and
attempt to re-enter the guest with a pending exception and emulation
required to verify KVM continues to punt the combination to userspace,
e.g. doesn't explode, WARN, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211228232437.1875318-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Verify that the PMU event filter works as expected.
Note that the virtual PMU doesn't work as expected on AMD Zen CPUs (an
intercepted rdmsr is counted as a retired branch instruction), but the
PMU event filter does work.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the x86 model number from CPUID.01H:EAX.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move this static inline function to processor.h, so that it can be
used in individual tests, as needed.
Opportunistically replace the bare 'unsigned' with 'unsigned int.'
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the one ad hoc "AuthenticAMD" CPUID vendor string comparison
with a new function, is_amd_cpu().
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor is_intel_cpu() to make it easier to reuse the bulk of the
code for other vendors in the future.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-3-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_xsave_req_perm() is currently defined and used by x86_64 only.
Make it compiled into vm_create_with_vcpus() only when on x86_64
machines. Otherwise, it would cause linkage errors, e.g. on s390x.
Fixes: 415a3c33e8 ("kvm: selftests: Add support for KVM_CAP_XSAVE2")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2022-01-19
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 262 insertions(+), 64 deletions(-).
The main changes are:
1) Various verifier fixes mainly around register offset handling when
passed to helper functions, from Daniel Borkmann.
2) Fix XDP BPF link handling to assert program type,
from Toke Høiland-Jørgensen.
3) Fix regression in mount parameter handling for BPF fs,
from Yafang Shao.
4) Fix incorrect integer literal when marking scratched stack slots
in verifier, from Christy Lee.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add ringbuf memory type confusion test
bpf, selftests: Add various ringbuf tests with invalid offset
bpf: Fix ringbuf memory type confusion when passing to helpers
bpf: Fix out of bounds access for ringbuf helpers
bpf: Generally fix helper register offset check
bpf: Mark PTR_TO_FUNC register initially with zero offset
bpf: Generalize check_ctx_reg for reuse with other types
bpf: Fix incorrect integer literal used for marking scratched stack.
bpf/selftests: Add check for updating XDP bpf_link with wrong program type
bpf/selftests: convert xdp_link test to ASSERT_* macros
xdp: check prog type before updating BPF link
bpf: Fix mount source show for bpffs
====================
Link: https://lore.kernel.org/r/20220119011825.9082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two tests, one which asserts that ring buffer memory can be passed to
other helpers for populating its entry area, and another one where verifier
rejects different type of memory passed to bpf_ringbuf_submit().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Assert that the verifier is rejecting invalid offsets on the ringbuf entries:
# ./test_verifier | grep ring
#947/u ringbuf: invalid reservation offset 1 OK
#947/p ringbuf: invalid reservation offset 1 OK
#948/u ringbuf: invalid reservation offset 2 OK
#948/p ringbuf: invalid reservation offset 2 OK
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
The commit b8a58aa6fc ("af_unix: Cut unix_validate_addr() out of
unix_mkname().") moved the bound test part into unix_validate_addr().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20220113002849.4384-6-kuniyu@amazon.co.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a test for the batching and bpf_(get|set)sockopt in bpf
unix iter.
It does the following.
1. Creates an abstract UNIX domain socket
2. Call bpf_setsockopt()
3. Call bpf_getsockopt() and save the value
4. Call setsockopt()
5. Call getsockopt() and save the value
6. Compare the saved values
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20220113002849.4384-5-kuniyu@amazon.co.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
