mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-12-01 03:56:44 +00:00
6ca0f81c0b
8797 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Gaurav Batra
|
1f7aacc5eb |
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes:
|
||
|
Gaurav Batra
|
096339ab84 |
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
When DMA window is backed by 2MB TCEs, the DMA address for the mapped
page should be the offset of the page relative to the 2MB TCE. The code
was incorrectly setting the DMA address to the beginning of the TCE
range.
Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV
ethernet port, when DMA window is backed by 2MB TCEs.
Fixes:
|
||
|
Jason Gunthorpe
|
ad593827db |
powerpc/iommu: Remove iommu_del_device()
Now that power calls iommu_device_register() and populates its groups
using iommu_ops->device_group it should not be calling
iommu_group_remove_device().
The core code owns the groups and all the other related iommu data, it
will clean it up automatically.
Remove the bus notifiers and explicit calls to
iommu_group_remove_device().
Fixes:
|
||
|
Rob Herring
|
79de36042e |
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
Commit |
||
|
Linus Torvalds
|
70cc1b5307 |
powerpc updates for 6.4
- Add support for building the kernel using PC-relative addressing on Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel Stanley,
Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro Yamada, Michael
Neuling, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin,
Nick Desaulniers, Nysal Jan K.A, Pali Rohár, Paul Gortmaker, Paul Mackerras,
Petr Vaněk, Randy Dunlap, Rob Herring, Sachin Sant, Sean Christopherson, Segher
Boessenkool, Timothy Pearson.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmRLdD8THG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPrED/93Hwi1/8udXYV6OAFBnLLLDX9RZWNx
sj6W7PC/yY7MGUTIGcayrAURt5xFfQZMBdq9nhhH46Wyd8pSUe1IlpXIEgqeH64Y
5uaSe6u4OZ5dDmiYz8bM+Y4Ixkfq1xMO0Rj27FIRJyU4Pp6gyMQ6/8W+iPU2vYIb
jl4frVO8PpmCbW8euOyT/b9YB2h79+5nLgZT4RvmYJblKQwgzRZWaiCAU0wYf+xT
xYsMQcqJlPstizTnXIr+GC08VrMPQR51kJCurnNUMXoAQY6toEXebveWRNZ3sH39
K0BRQ036NNGPS4GlHVbjgLIdoWr4pUEROZ48Jy9WeiDh6OwO2vb2zrm7ZLtKlGXI
LCQ08T9diPbAAJyVJaKjpsNXhTffuLPRhIOr1o2vqGvY+Fqbw96bPQAyFbxpJtrw
rGTTc5e93fEdZV+eaGR8kfdNM75WM6lgiteaIbUnpirYTh/0j6YEO1Ijc4d9e5ux
aoHN2eXQDjMm9foZf1D6vaCTRyN8LwLa9hcydKCn6+qULUQzoZ2r4cRt6eSD7+fx
Wni1Zg7vD6xx294nVmhg5dWuD4qVIAZj3BZPFHHR2SPqy+UbEJLk/NKgznmrhhgQ
HBcZAEFqIBZkA4e0w6LJKh/1j1rxpZUokgjMotOJq4VRivq82W1P7SioFDY3/6w5
UvGtIgGq4Qsa2Q==
=89WH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
|
||
|
Linus Torvalds
|
f20730efbd |
SMP cross-CPU function-call updates for v6.4:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
||
|
Linus Torvalds
|
2aff7c706c |
Objtool changes for v6.4:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
34b62f186d |
pci-v6.4-changes
-----BEGIN PGP SIGNATURE-----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=HPXl
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
|
||
|
Nicholas Piggin
|
0c993300d5 |
powerpc: Fix merge conflict between pcrel and copy_thread changes
Fix a conflict between commit |
||
|
Linus Torvalds
|
e7989789c6 |
Timers and timekeeping updates:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relcations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they fail
to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up
in the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context
of different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource is
installed, i.e. timekeeping is still tick based and the tick period
advances from there.
The early enablement of sched_clock() broke this alignement as the time
accumulated by sched_clock() is taken into account when timekeeping is
initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
multiple of tick periods, which breaks applications which relied on
that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements
- Cure the concurrent writer race for idle and IO sleeptime statistics
The statitic values which are exposed via /proc/stat are updated from
the CPU local idle exit and remotely by cpufreq, but that happens
without any form of serialization. As a consequence sleeptimes can be
accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
- Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
idle exit updates. As a consequence the readout may result in random
and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing the
remote runqueues nr_iowait counter. The latter is impossible to fix,
so the only way to deal with that is to document it properly and to
remove the assertion in the selftest which triggers occasionally due
to that.
- Restructure struct tick_sched for better cache layout
- Some small cleanups and a better cache layout for struct tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU timers
For unknown reason the introduction of the timer_wait_running() callback
missed to fixup posix CPU timers, which went unnoticed for almost four
years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
out from hard interrupt context to task work, which is handled before
returning to user space or to a VM. The expiry mechanism moves the
expired timers to a stack local list head with sighand lock held. Once
sighand is dropped the task can be preempted and a task which wants to
delete a timer will spin-wait until the expiry task is scheduled back
in. In the worst case this will end up in a livelock when the preempting
task and the expiry task are pinned on the same CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry task
hold it accross the expiry function and let the deleting task which
waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra mutex_lock()/unlock()
pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents the
livelock and cures the problem for RT and !RT systems.
-----BEGIN PGP SIGNATURE-----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=SVnj
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
|
||
|
Michael Ellerman
|
6fee130204 |
powerpc/64: Don't call trace_hardirqs_on() in prep_irq_for_idle()
Since commit
|
||
|
Michael Ellerman
|
7640854d96 |
powerpc/64: Mark prep_irq_for_idle() __cpuidle
Code in the idle path is not allowed to be instrumented because RCU is
disabled, see commit
|
||
|
Michael Ellerman
|
e5b6634aa1 |
powerpc/irq: Mark check_return_regs_valid() notrace
check_return_regs_valid() is called from the middle of the irq exit handling, which is all notrace, so mark it notrace also. Reported-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://lore.kernel.org/all/4C073F6A-C812-4C4A-BB7A-ECD10B75FB88@linux.ibm.com/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230406122118.3760344-1-mpe@ellerman.id.au |
||
|
Nicholas Piggin
|
77e69ee7ce |
powerpc/64: modules support building with PCREL addresing
Build modules using PCREL addressing when CONFIG_PPC_KERNEL_PCREL=y.
- The module loader must handle several new relocation types:
* R_PPC64_REL24_NOTOC is a function call handled like R_PPC_REL24, but
does not restore r2 upon return. The external function call stub is
changed to use pcrel addressing to load the function pointer rather
than based on the module TOC.
* R_PPC64_GOT_PCREL34 is a reference to external data. A GOT table
must be built by hand, because the linker adds this during the final
link (which is not done for kernel modules). The GOT table is built
similarly to the way the external function call stub table is. This
section is called .mygot because .got has a special meaning for the
linker and can become upset.
* R_PPC64_PCREL34 is used for local data addressing, but there is a
special case where the percpu section is moved at load-time to the
percpu area which is out of range of this relocation. This requires
the PCREL34 relocations are converted to use GOT_PCREL34 addressing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Some coding style & formatting fixups]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-7-npiggin@gmail.com
|
||
|
Nicholas Piggin
|
7e3a68be42 |
powerpc/64: vmlinux support building with PCREL addresing
PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com |
||
|
Nicholas Piggin
|
4e991e3c16 |
powerpc: add CFUNC assembly label annotation
This macro is to be used in assembly where C functions are called. pcrel addressing mode requires branches to functions with a localentry value of 1 to have either a trailing nop or @notoc. This macro permits the latter without changing callers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Add dummy definitions to fix selftests build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com |
||
|
Nicholas Piggin
|
dc5dac748a |
powerpc/64: Add support to build with prefixed instructions
Add an option to build kernel and module with prefixed instructions if the CPU and toolchain support it. This is not related to kernel support for userspace execution of prefixed instructions. Building with prefixed instructions breaks some extended inline asm memory addressing, for example it will provide immediates that exceed the range of simple load/store displacement. Whether this is a toolchain or a kernel asm problem remains to be seen. For now, these are replaced with simpler and less efficient direct register addressing when compiling with prefixed. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-4-npiggin@gmail.com |
||
|
Nicholas Piggin
|
b270bebd34 |
powerpc/64s: Run at the kernel virtual address earlier in boot
This mostly consolidates the Book3E and Book3S behaviour in boot WRT executing from the physical or virtual address. Book3E sets up kernel virtual linear map in start_initialization_book3e and runs from the virtual linear alias after that. This change makes Book3S begin to execute from the virtual alias at the same point. Book3S can not use its MMU for that at this point, but when the MMU is disabled, the virtual linear address correctly aliases to physical memory because the top bits of the address are ignored with MMU disabled. Secondaries execute from the virtual address similarly early. This reduces the differences between subarchs, but the main motivation was to enable the PC-relative addressing ABI for Book3S, where pointer calculations must execute from the virtual address or the top bits of the pointer will be lost. This is similar to the requirement the TOC relative addressing already has that the TOC pointer use its virtual address. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-3-npiggin@gmail.com |
||
|
Nicholas Piggin
|
4f18b9e6ca |
powerpc/64: Move initial base and TOC pointer calculation
A later change moves the non-prom case to run at the virtual address earlier, which calls for virtual TOC and kernel base. Split these two calculations for prom and non-prom to make that change simpler. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Retain relative_toc call for start_initialization_book3e] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-2-npiggin@gmail.com |
||
|
Josh Poimboeuf
|
7412a60dec |
cpu: Mark panic_smp_self_stop() __noreturn
In preparation for improving objtool's handling of weak noreturn functions, mark panic_smp_self_stop() __noreturn. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/92d76ab5c8bf660f04fdcd3da1084519212de248.1681342859.git.jpoimboe@kernel.org |
||
|
Nathan Chancellor
|
8002725b9e |
powerpc/32: Include thread_info.h in head_booke.h
When building with W=1 after commit
|
||
|
Nicholas Piggin
|
89fb39134a |
powerpc: copy_thread don't set PPR in user interrupt frame regs
syscalls do not set the PPR field in their interrupt frame and return from syscall always sets the default PPR for userspace, so setting the value in the ret_from_fork frame is not necessary and mildly inconsistent. Remove it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-9-npiggin@gmail.com |
||
|
Nicholas Piggin
|
d195ce4695 |
powerpc: copy_thread don't set _TIF_RESTOREALL
In the kernel user thread path, don't set _TIF_RESTOREALL because the thread is required to call kernel_execve() before it returns, which will set _TIF_RESTOREALL if necessary via start_thread(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-8-npiggin@gmail.com |
||
|
Nicholas Piggin
|
b504b6aade |
powerpc: differentiate kthread from user kernel thread start
Kernel created user threads start similarly to kernel threads in that they call a kernel function after first returning from _switch, so they share ret_from_kernel_thread for this. Kernel threads never return from that function though, whereas user threads often do (although some don't, e.g., IO threads). Split these startup functions in two, and catch kernel threads that improperly return from their function. This is intended to make the complicated code a little bit easier to understand. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-7-npiggin@gmail.com |
||
|
Nicholas Piggin
|
eed7c420aa |
powerpc: copy_thread differentiate kthreads and user mode threads
When copy_thread is given a kernel function to run in arg->fn, this does not necessarily mean it is a kernel thread. User threads can be created this way (e.g., kernel_init, see also x86's copy_thread()). These threads run a kernel function which may call kernel_execve() and return, which returns like a userspace exec(2) syscall. Kernel threads are to be differentiated with PF_KTHREAD, will always have arg->fn set, and should never return from that function, instead calling kthread_exit() to exit. Create separate paths for the kthread and user kernel thread creation logic. The kthread path will never exit and does not require a user interrupt frame, so it gets a minimal stack frame. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-6-npiggin@gmail.com |
||
|
Nicholas Piggin
|
5088a6246b |
powerpc/64: ret_from_fork avoid restoring regs twice
If the system call return path always restores NVGPRs then there is no need for ret_from_fork to do it. The HANDLER_RESTORE_NVGPRS does the right thing for this. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-5-npiggin@gmail.com |
||
|
Nicholas Piggin
|
af5ca9d5c8 |
powerpc: use switch frame for ret_from_kernel_thread parameters
The kernel thread path in copy_thread creates a user interrupt frame on stack and stores the function and arg parameters there, and ret_from_kernel_thread loads them. This is a slightly confusing way to overload that frame. Non-volatile registers are loaded from the switch frame, so the parameters can be stored there. The user interrupt frame is now only used by user threads when they return to user. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-4-npiggin@gmail.com |
||
|
Nicholas Piggin
|
959791e45f |
powerpc: copy_thread make ret_from_fork register setup consistent
The ret_from_fork code for 64e and 32-bit set r3 for syscall_exit_prepare the same way that 64s does, so there should be no need to special-case them in copy_thread. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-3-npiggin@gmail.com |
||
|
Nicholas Piggin
|
c013e9f2bb |
powerpc: copy_thread remove unused pkey code
The pkey registers (AMR, IAMR) do not get loaded from the switch frame so it is pointless to save anything there. Remove the dead code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230325122904.2375060-2-npiggin@gmail.com |
||
|
Mika Westerberg
|
09cc900632 |
PCI: Introduce pci_dev_for_each_resource()
Instead of open-coding it everywhere introduce a tiny helper that can be used to iterate over each resource of a PCI device, and convert the most obvious users into it. While at it drop doubled empty line before pdev_sort_resources(). No functional changes intended. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> |
||
|
Rob Herring
|
e4ab08be5b |
powerpc/isa-bridge: Remove open coded "ranges" parsing
"ranges" is a standard property with common parsing functions. Users shouldn't be implementing their own parsing of it. Reimplement the ISA brige "ranges" parsing using the common ranges iterator functions. The common routines are flexible enough to work on PCI and non-PCI to ISA bridges, so refactor pci_process_ISA_OF_ranges() and isa_bridge_init_non_pci() into a single implementation. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Unsplit some strings and use pr_xxx()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230327223045.819852-1-robh@kernel.org |
||
|
Greg Kroah-Hartman
|
cd8fe5b6db |
Merge 6.3-rc5 into driver-core-next
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
95d0b9d89d |
powerpc fixes for 6.3 #4
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y). - Fix oops when a PF_IO_WORKER thread tries to core dump. - Don't try to reconfigure VAS when it's disabled. Thanks to: Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, Russell Currey. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmQpT20THG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgBHsD/kB7wxwe+h/Xddx2l9le15HfSTlVOiU 7CO3jDYs//jt7E4ZEeHE0ppPRWcW5ICEttCrqWyT8WDfwMv7f+iBU80enZ5Rg/a7 tX5jOel1TmsStj2bfh/myI7CX/+mEwRZ1o3J6/UgaZDlI2OLzLP/gKet3rfSh3zJ ilqIZxoj+ARsaYIrxnopFHmSmD5oCAsvVM6COPd3epRnIWmfd7NxtKbZU3V4WdLy qL9Q9Dk+RmGDSzJe1j4cRR1fA6jRIFU1WYDFz38HIVX1grFKdsm2Eeta6OXwXWGz TZDp82IBka6SvFkPx2RE2bGqaWbjZbA8b1mK59s5hB9trU3qFgZjoRBJoR1hp/zc MjfKLTxW7qC/TQAwxBKzFgTm1njRY5H5aMDnV9+6fBBC6esTgBy/la8ZygPmqWJj fFulUobDul9xjMg7l0CS+cjyO31Bb68fmFJOH9fmXR3fYlkP9VgJh89demD4xbMQ UdtAdpI8xhV98e6pX+vSlfbaeUNqzJQ7UWtr6J08nY17dhcoPxJ9RaAZdsJkZIk3 IM/jwdhvpG++VM5CbiX+4yQHUJkekIXpfnxZIXqOl+rqv5Z0A8gRQkY469FjqZy7 EJoYIOBGiZEgiU4oqJRkp0ifMSPMt0I0gMmRq5NxS/64mxFHlwCsJvaiHQ/fd2m8 3DTDKQd6KOT31A== =1Sli -----END PGP SIGNATURE----- Merge tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y) - Fix oops when a PF_IO_WORKER thread tries to core dump - Don't try to reconfigure VAS when it's disabled Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and Russell Currey. * tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc/64s: Fix __pte_needs_flush() false positive warning |
||
|
Rob Herring
|
4d57e3515e |
powerpc: Use of_property_read_bool() for boolean properties
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230310144659.1541127-1-robh@kernel.org |
||
|
Rob Herring
|
857d423c74 |
powerpc: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org |
||
|
Nathan Lynch
|
af8bc68263 |
powerpc/rtas: lockdep annotations
Add lockdep annotations for the following properties that must hold: * Any error log retrieval must be atomically coupled with the prior RTAS call, without a window for another RTAS call to occur before the error log can be retrieved. * All users of the core rtas_args parameter block must hold rtas_lock. Move the definitions of rtas_lock and rtas_args up in the file so that __do_enter_rtas_trace() can refer to them. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-6-010e4416f13f@linux.ibm.com |
||
|
Nathan Lynch
|
32740fce09 |
powerpc/rtas: fix miswording in rtas_function kerneldoc
The 'filter' member is a pointer, not a bool; fix the wording accordingly. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-4-010e4416f13f@linux.ibm.com |
||
|
Nathan Lynch
|
1792e46ed0 |
powerpc/rtas: rtas_call_unlocked() kerneldoc
Add documentation for rtas_call_unlocked(), including details on how it differs from rtas_call(). Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-3-010e4416f13f@linux.ibm.com |
||
|
Nathan Lynch
|
271208ee5e |
powerpc/rtas: use memmove for potentially overlapping buffer copy
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
|
||
|
Nicholas Piggin
|
aa464ba9a1 |
lazy tlb: introduce lazy tlb mm refcount helper functions
Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting. This makes the lazy tlb mm references more obvious, and allows the refcounting scheme to be modified in later changes. There is no functional change with this patch. Link: https://lkml.kernel.org/r/20230203071837.1136453-3-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jens Axboe
|
fd72761894 |
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
Fixes:
|
||
|
Valentin Schneider
|
4c8c3c7f70 |
treewide: Trace IPIs sent via smp_send_reschedule()
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
|
||
|
Marco Elver
|
90db9dbedd |
kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
With appropriate compiler support [1], KASAN builds use __asan prefixed meminstrinsics, and KASAN no longer overrides memcpy/memset/memmove. If compiler support is detected (CC_HAS_KASAN_MEMINTRINSIC_PREFIX), define memintrinsics normally (do not prefix '__'). On powerpc, KASAN is the only user of __mem functions, which are used to define instrumented memintrinsics. Alias the normal versions for KASAN to use in its implementation. Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1] Link: https://lore.kernel.org/oe-kbuild-all/202302271348.U5lvmo0S-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Daniel Axtens <dja@axtens.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Fangrui Song
|
aff69273af |
vdso: Improve cmd_vdso_check to check all dynamic relocations
The actual intention is that no dynamic relocation exists in the VDSO. For this the VDSO build validates that the resulting .so file does not have any relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture, which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative relocations too. However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If a port fails to determine the exact .rel[a].dyn size, the trailing zeros become R_*_NONE relocations. E.g. ld's powerpc port recently fixed https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are generally a no-op in the dynamic loaders. So just ignore them. Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting .so file does not contain any R_* relocation entries except R_*_NONE. Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64 Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64 Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com |
||
|
Greg Kroah-Hartman
|
1b40189691 |
powerpc/sysfs: move to use bus_get_dev_root()
Direct access to the struct bus_type dev_root pointer is going away soon so replace that with a call to bus_get_dev_root() instead, which is what it is there for. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230313182918.1312597-12-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Luis Chamberlain
|
bfedee5dc4 |
powerpc: Simplify sysctl registration for powersave_nap_ctl_table
There is no need to declare an extra tables to just create directory, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230310232850.3960676-2-mcgrof@kernel.org |
||
|
Christophe Leroy
|
0aafbdf35c |
powerpc: Make generic_calibrate_decr() the default
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never checked so it must be non null on all platforms. Most platforms define generic_calibrate_decr() as their ppc_md.calibrate_decr(). Have time_init() call generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL, and remove default assignment from all machines. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu |