Just like what we did for write/recovery, also extract the read bio
assembly code into a helper for scrub.
The difference between the three are:
- rmw_assemble_read_bios() only submit reads for missing sectors
Thus it will skip cached sectors, but will also read sectors which
is not covered by any full stripe. (For cache usage)
- recover_assemble_read_bios() reads every sector which has not failed
- scrub_assemble_read_bios() has extra check for vertical stripes
It's mostly the same as rmw_assemble_read_bios(), but will skip
sectors which is not covered by a vertical stripe.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This includes the following changes:
- Implement new raid_unplug() functions
Now we don't need a workqueue to run the plug, as all our
work is just queue rmw_rbio_work() call, which can be executed
without sleep.
- Implement a rmw_rbio_work_locked() helper
This is for unlock_stripe(), which is already holding the full stripe
lock.
- Remove all the old functions
This should already shows how complex the old functions are, as we
ended up removing the following functions:
* rmw_work()
* validate_rbio_for_rmw()
* raid56_rmw_end_io_work()
* raid56_rmw_stripe()
* full_stripe_write()
* partial_stripe_write()
* __raid56_parity_write()
* run_plug()
* unplug_work()
* btrfs_raid_unplug()
* rmw_work()
* __raid56_parity_recover()
* raid_recover_end_io_work()
- Unexport rmw_rbio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new entrance will be called rmw_rbio(), it will have a streamlined
workflow by using submit-and-wait method.
Thus there will be no weird jumps between tons of functions, thus way
more reader friendly, and will make later expansion easier, as it's now
a straight workflow, the timing is way more clear.
Unfortunately we can not yet migrate the RMW path to use this new
entrance as we still need extra work to address the plug and
unlock_stripe() function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs uses end_io functions to jump between different stages
of recovery.
For example, we go the following different functions:
- raid56_bio_end_io()
This handles the read for all the sectors (except the missing device).
- __raid_recover_end_io()
This does the real work, it's called inside the delayed work function
raid_recover_end_io_work().
This one recovery path involves at least 3 different functions, which is
a big burden for readers.
This patch will change the behavior by:
- Introduce a unified recovery entrance, recover_rbio()
- Use submit-and-wait method
So the workflow is not interrupted by the endio function jump.
This doesn't bring performance change, but reduce the burden for
reviewers.
- Run the main function in the rmw_workers workqueue
Now raid56_parity_recover() only needs to setup the work, and
queue the work using start_async_work().
Now readers only need to do one function jump (start_async_work()) to
find out the main entrance of recovery path.
Furthermore, recover_rbio() function can easily be reused by other paths.
The old recovery path is still utilized by degraded write path.
It will be cleaned up when we have migrated the write path.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This includes extra changes:
- The allocation for unmap_array[] and pointers[]
Now we allocate them in one go, and free them together.
- Remove @err
Use errno_to_blk_status(ret) instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new helper will be also utilized in the incoming refactor of
recovery path.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently finish_rmw() will update the P/Q stripes before submitting
the writes.
It's done behind a for(;;) loop, it's a little congested indent-wise, so
extract the code into a helper called generate_pq_vertical().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This refactor includes the following behavior change first:
- Don't error out if only P/Q is corrupted
The old code will directly error out if only P/Q is corrupted.
Although it is an logical error if we go into rebuild path with
only P/Q corrupted, there is no need to error out.
Just skip the rebuild and return the already good data.
Then comes the following refactor which shouldn't cause behavior
changes:
- Introduce a helper to do vertical stripe recovery
This not only reduce one indent level, but also paves the road for
later data checksum verification in RMW cycles.
- Sort rbio->faila/b before recovery
So we don't need to do the same swap every vertical stripe
- Replace a BUG_ON() with ASSERT()
Or checkpatch won't let me pass.
- Mark recovered sectors uptodate after the recover loop
- Do the cleanup for pointers unconditionally
We only need to initialize @pointers and @unmap_array to NULL, so
we can safely free them unconditionally.
- Mark the repaired sector uptodate in recover_vertical()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The two structures appear on the same call paths, btrfs_bio_ctrl is
embedded in extent_page_data and we pass bio_ctrl to some functions.
After merging there are fewer indirections and we have only one control
structure. The packing remains same.
The btrfs_bio_ctrl was selected as the target structure as the operation
is closer to bio processing.
Structure layout:
struct btrfs_bio_ctrl {
struct bio * bio; /* 0 8 */
int mirror_num; /* 8 4 */
enum btrfs_compression_type compress_type; /* 12 4 */
u32 len_to_stripe_boundary; /* 16 4 */
u32 len_to_oe_boundary; /* 20 4 */
btrfs_bio_end_io_t end_io_func; /* 24 8 */
bool extent_locked; /* 32 1 */
bool sync_io; /* 33 1 */
/* size: 40, cachelines: 1, members: 8 */
/* padding: 6 */
/* last cacheline: 40 bytes */
};
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of the two members is a boolean, so change the type
accordingly. We have space in extent_page_data due to alignment there's
no change in size.
Signed-off-by: David Sterba <dsterba@suse.com>
The div_factor* helpers calculate fraction or percentage fraction. The
name is a bit confusing, we use it only for percentage calculations and
there are two helpers.
There's a helper mult_frac that's for general fractions, that tries to
be accurate but we multiply and divide by small numbers so we can use
the div_u64 helper.
Rename the div_factor* helpers and use 1..100 percentage range, also drop
the case checking for percentage == 100, it's never hit.
The conversions:
* div_factor calculates tenths and the numbers need to be adjusted
* div_factor_fine is direct replacement
Signed-off-by: David Sterba <dsterba@suse.com>
If when doing a direct IO write we need to fallback to buffered IO, we
this comment at btrfs_direct_write() that says we can't directly fallback
to buffered IO if we have a NOWAIT iocb, because we have no support for
NOWAIT buffered writes. That is not true anymore, as support for NOWAIT
buffered writes was added recently in commit 926078b21d ("btrfs: enable
nowait async buffered writes").
However we still can't fallback to a buffered write in case we have a
NOWAIT iocb, because we'll need to flush delalloc and wait for it to
complete after doing the buffered write, and that can block for several
reasons, the main reason being waiting for IO to complete.
So update the comment to mention all that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The header files should use the /* */ comment style, introduced in
commit f3a84ccd28 ("btrfs: move the tree mod log code into its own
file").
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have inline extent read code behind two levels of
indentation, factor them them out into a new function,
read_inline_extent(), to make it a little easier to read.
Since we're here, also remove @extent_offset and @pg_offset arguments
from uncompress_inline() function, as it's not possible to have inline
extents at non-inline file offset.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The argument @new_inline changes the following members of extent_map:
- em->compress_type
- EXTENT_FLAG_COMPRESSED of em->flags
However neither members makes a difference for inline extents:
- Inline extent read never use above em members
As inside btrfs_get_extent() we directly use the file extent item to
do the read.
- Inline extents are never to be split
Thus code really needs em->compress_type or that flag will never be
executed on inlined extents.
(btrfs_drop_extent_cache() would be one example)
- Fiemap no longer relies on extent maps
Recent fiemap optimization makes fiemap to search subvolume tree
directly, without using any extent map at all.
Thus those members make no difference for inline extents any more.
Furthermore such exception without much explanation is really a source
of confusion.
Thus this patch will completely remove the argument, and always set the
involved members, unifying the behavior.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently for inline extents read inside btrfs_get_extent(), we will
reset several extent map members:
- em->start
Reset to extent_start, which is completely unnecessary.
The extent_start and em->start should have already be zero, ensured by
tree-checker already.
- em->len
Reset the round_up(copy_size, fs_info->sectorsize), which is again
unnecessary.
- em->orig_block_len
Reset to em->len (sectorsize), while it is originally unset from
btrfs_extent_item_to_extent_map().
This makes no difference, as all extent map handling paths will
ignore the orig_block_len if they found it's an inlined extent.
Such inline extent orig_block_len ignoring examples can be found in
btrfs_drop_extent_cache().
- em->orig_start
Reset to em->start (0), while it is originally set to EXTENT_MAP_HOLE.
This makes no difference either, as all extent map handling paths will
ignore the em->orig_start if they found it's an inline extent.
Thus all these em members resetting are unnecessary.
Replace them with ASSERT()s checking the only two members (block_start
and length) that make sense.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we calculate inline extent read in a way that inline extent
can start at non-zero offset.
This is consistent with the inode selftests, which puts an inline extent
at file offset 5.
Meanwhile the inline extent creation code will only create inline extent
at file offset 0.
Furthermore with the introduction of tree-checker on file extents, we are
actively rejecting inline extent which starts at non-zero file offset.
And so far we haven't yet seen any report of rejected inline extents at
non-zero file offset.
This all means, the extra calculation to support inline extents at
non-zero file offset is mostly paper weight, and damaging the
readability of the code.
Thus this patch will:
- Add extra ASSERT()s to make sure involved file offset are all 0
- Remove @extent_offset calculation
- Simplify the involved code
As several variables are now single-use, no need to declare them as
a variable anymore.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In our inode-tests.c, we create an inline offset at file offset 5, which
is no longer possible since the introduction of tree-checker.
Thus I don't think we should spend time maintaining some corner cases
which are already ruled out by tree-checker.
So this patch will:
- Change the inline extent to start at file offset 0
Also change its length to 6 to cover the original length
- Add an extra ASSERT() for btrfs_add_extent_mapping()
This is to make sure tree-checker is working correctly.
- Update the inode selftest
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into orphan.h to cut down on code in ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will make syncing fs.h to user space a little easier if we can pull
the super block specific helpers out of fs.h and put them in super.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into super.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have a few of these in fs.h, move the remaining checks out of
ctree.h into fs.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into verity.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have a dev-replace.h, simply move these prototypes and
helpers into dev-replace.h where they belong.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into scrub.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into relocation.h to cut down on code in
ctree.h
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into acl.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These belong in extent-tree.h, they were missed because they were not
grouped with the other extent-tree.c prototypes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code for these functions are in messages.c, move the defines and
prototypes to messages.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into file.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into ioctl.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into uuid-tree.h to cut down on the code in
ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these prototypes out of ctree.h and into file-item.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these prototypes out of ctree.h and into their own header file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the defrag code is all in one file, create a defrag.h and move
all the defrag related prototypes and helper out of ctree.h and into
defrag.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the other big portion of defrag code that has existed in
ioctl.c. Move it to its new home in defrag.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This currently exists in file.c, move it to the more natural location in
defrag.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ reformat comments ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This currently has only one helper in it, and it's for tree based
defrag. We have the various defrag code in 3 different places, so
rename this to defrag.c. Followup patches will move the code into this
new file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I initially wanted to make a new header file for this, but these
prototypes do naturally fit into btrfs_inode.h. If we want to extract
vfs from pure btrfs code in the future we may need to split this up, but
btrfs_inode embeds the vfs_inode, so it makes sense to put the
prototypes in this header for now.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These helpers are core to btrfs, and in order to more easily sync
various parts of the btrfs kernel code into btrfs-progs we need to be
able to carry these helpers with us. However we want to have our own
implementation for the helpers themselves, currently they're implemented
in different files that we want to sync inside of btrfs-progs itself.
Move these into their own C file, this will allow us to contain our
overrides in btrfs-progs in it's own file without messing with the rest
of the codebase.
In copying things over I fixed up a few whitespace errors that already
existed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When moving the printk messages into their own file I got a compiler
error because the includes grabbed compression.h, but nothing pulled in
the blk_types.h dependency that compression.h has because it uses
blkstatus_t. Add blk_types.h to compression.h so that this sort of
thing doesn't happen in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's several structures that are embedded inside of fs_info.h, so if
we don't have all the proper includes when we include fs.h we'll get a
variety of compile errors. I fixed this by adding a temporary c file
that just had #include "fs.h" and then added include files until the
compiler stopped complaining.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used by the volumes code and the tree checker code. We want to
maintain inline however, so simply move it to volumes.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Do away with the defines and use an enum as it's cleaner.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update, reformat or reword function comments. This also removes the kdoc
marker so we don't get reports when the function name is missing.
Changes made:
- remove kdoc markers
- reformat the brief description to be a proper sentence
- reword to imperative voice
- align parameter list
- fix typos
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of this was removed in 7f9fe61440 ("btrfs: improve
global reserve stealing logic"), drop this code as it's no longer called
by anybody.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I wrote the following coccinelle script to find function declarations
that didn't have the corresponding code for them
@funcproto@
identifier func;
type T;
position p0;
@@
T func@p0(...);
@funccode@
identifier funcproto.func;
position p1;
@@
func@p1(...) { ... }
@script:python depends on !funccode@
p0 << funcproto.p0;
@@
print("Proto with no function at %s:%s" % (p0[0].file, p0[0].line))
and ran it against btrfs, which identified the 4 function prototypes
I've removed in this patch.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move all the root-tree.c prototypes to root-tree.h, and then update all
the necessary files to include the new header.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This batch of prototypes no longer have code associated with them, so
remove them.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These exist in delalloc-space.c, move them from ctree.h into
delalloc-space.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move all the extent tree related prototypes to extent-tree.h out of
ctree.h, and then go include it everywhere needed so everything
compiles.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was prototyped in ctree.h and the code existed in extent-tree.c,
but it's space-info related so move it into space-info.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are defined already in space-info.h, remove them from ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've accumulated some whitespace problems in ctree.h, clean these up.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These more naturally fit in with the locking related code, and they're
all defines so they can easily go anywhere, move them out of ctree.h
into locking.h
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a lot of the fs_info related helpers and stuff
isolated, copy these over to fs.h out of ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
For directories with encrypted files/filenames, we need to store a flag
indicating this fact. There's no room in other fields, so we'll need to
borrow a bit from dir_type. Since it's now a combination of type and
flags, we rename it to dir_flags to reflect its new usage.
The new flag, FT_ENCRYPTED, indicates a directory containing encrypted
data, which is orthogonal to file type; therefore, add the new
flag, and make conversion from directory type to file type strip the
flag.
As the file types almost never change we can afford to use the bits.
Actual usage will be guarded behind an incompat bit, this patch only
adds the support for later use by fscrypt.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While struct qstr is more natural without fscrypt, since it's provided
by dentries, struct fscrypt_str is provided by the fscrypt handlers
processing dentries, and is thus more natural in the fscrypt world.
Replace all of the struct qstr uses with struct fscrypt_str.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most places where we get a struct qstr, we are doing so from a dentry.
With fscrypt, the dentry's name may be encrypted on-disk, so fscrypt
provides a helper to convert a dentry name to the appropriate disk name
if necessary. Convert each of the dentry name accesses to use
fscrypt_setup_filename(), then convert the resulting fscrypt_name back
to an unencrypted qstr. This does not work for nokey names, but the
specific locations that could spawn nokey names are noted.
At present, since there are no encrypted directories, nothing goes down
the filename encryption paths.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many functions throughout btrfs take name buffer and name length
arguments. Most of these functions at the highest level are usually
called with these arguments extracted from a supplied dentry's name.
But the entire name can be passed instead, making each function a little
more elegant.
Each function whose arguments are currently the name and length
extracted from a dentry is herein converted to instead take a pointer to
the name in the dentry. The couple of calls to these calls without a
struct dentry are converted to create an appropriate qstr to pass in.
Additionally, every function which is only called with a name/len
extracted directly from a qstr is also converted.
This change has positive effect on stack consumption, frame of many
functions is reduced but this will be used in the future for fscrypt
related structures.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The module exit function exit_btrfs_fs() is duplicating a section of code
in init_btrfs_fs(). Add a helper to remove the duplicated code. Due
to the init/exit section requirements the function must be inline and
not a plain static as it could cause section mismatch.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pas GFP_KERNEL as parameter so we can use it directly in
alloc_scrub_sector.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one caller that calls scrub_setup_recheck_block in the
memalloc_nofs_save/_restore protection so it's effectively already
GFP_NOFS and it's safe to use GFP_KERNEL.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass GFP_NOFS, we can drop the parameter and use it
directly.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one caller that passes GFP_NOFS, we can drop the parameter
an use the flags directly.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was added while I was moving this code to its new home, it can be
removed now.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a large patch, but because they're all macros it's impossible to
split up. Simply copy all of the item accessors in ctree.h and paste
them in accessors.h, and then update any files to include the header so
everything compiles.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments, style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is specific to the item-accessor code, move it out of ctree.h into
accessor.h/.c and then update the users to include the new header file.
This un-inlines btrfs_init_map_token, however this is only called once
per function so it's not critical to be inlined. This also saves 904
bytes of code on a release build.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename struct-funcs.c to accessors.c so we can move the item accessors
out of ctree.h. accessors.c is a better description of the code that is
contained in these files.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is fs wide information, move it out of ctree.h into fs.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not using this code anywhere we can remove it as well as
the member from fs_info.
We don't have any mount options or on/off features that would utilize
the pending infrastructure, the last one was inode_cache.
There was a patchset [1] to enable some features from sysfs that would
break things if it would be set immediately. In case we'll need that
kind of logic again the patch can be reverted, but for the current use
it can be replaced by the single state bit to do the commit.
[1] https://lore.kernel.org/linux-btrfs/1422609654-19519-1-git-send-email-quwenruo@cn.fujitsu.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we are only using fs_info->pending_changes to indicate that we
need a transaction commit. The original users for this were removed
years ago and we don't have more usage in sight, so this is the only
remaining reason to have this field. Add a flag so we can remove this
code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These definitions are fs wide, take them out of ctree.h and put them in
fs.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are fs wide definitions and helpers, move them out of ctree.h and
into fs.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These helpers use functions not defined in fs.h, they're simply
accessors of the super block in fs_info, convert them to macros so
that we don't have a weird dependency between fs.h and accessors.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to use fs.h to hold fs wide related helpers and definitions,
move the FS_STATE enum and related helpers to fs.h, and then update all
files that need these definitions to include fs.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The printk index work can be pushed into the printk helpers themselves,
this allows us to further sanitize messages.h, removing the last
include in the header itself.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These call functions that aren't defined in, or will be moved out of,
ctree.h Move them to super.c where the other assert/error message code
is defined. Drop the __noreturn attribute for btrfs_assertfail as
objtool does not like it and fails with warnings like
fs/btrfs/dir-item.o: warning: objtool: .text.unlikely: unexpected end of section
fs/btrfs/xattr.o: warning: objtool: btrfs_setxattr() falls through to next function btrfs_setxattr_trans.cold()
fs/btrfs/xattr.o: warning: objtool: .text.unlikely: unexpected end of section
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several fs wide related helpers in ctree.h. The bulk of these
are the incompat flag test helpers, but there are things such as
btrfs_fs_closing() and the read only helpers that also aren't directly
related to the ctree code. Move these into a fs.h header, which will
serve as the location for file system wide related helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a define for the data buffer size (though the maximum size is not
limited by it) BTRFS_SEND_BUF_SIZE_V2 so it's more visible.
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Callers that pass non-zero generation always want to perform the
generation check, we can simply encode that in one parameter and drop
check_generation. Add function documentation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a request to automatically enable async discard for capable
devices. We can do that, the async mode is designed to wait for larger
freed extents and is not intrusive, with limits to iops, kbps or latency.
The status and tunables will be exported in /sys/fs/btrfs/FSID/discard .
The automatic selection is done if there's at least one discard capable
device in the filesystem (not capable devices are skipped). Mounting
with any other discard option will honor that option, notably mounting
with nodiscard will keep it disabled.
Link: https://lore.kernel.org/linux-btrfs/CAEg-Je_b1YtdsCR0zS5XZ_SbvJgN70ezwvRwLiCZgDGLbeMB=w@mail.gmail.com/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The sysfs_emit is the safe API for writing to the sysfs files,
previously converted from scnprintf, there's one left to do in
btrfs_read_policy_show.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We sometimes have to allocate new extent states when clearing or setting
new bits in an extent io tree. Generally we preallocate this before
taking the tree spin lock, but we can use this preallocated extent state
sometimes and then need to try to do a GFP_ATOMIC allocation under the
lock.
Unfortunately sometimes this fails, and then we hit the BUG_ON() and
bring the box down. This happens roughly 20 times a week in our fleet.
However the vast majority of callers use GFP_NOFS, which means that if
this GFP_ATOMIC allocation fails, we could simply drop the spin lock, go
back and allocate a new extent state with our given gfp mask, and begin
again from where we left off.
For the remaining callers that do not use GFP_NOFS, they are generally
using GFP_NOWAIT, which still allows for some reclaim. So allow these
allocations to attempt to happen outside of the spin lock so we don't
need to rely on GFP_ATOMIC allocations.
This in essence creates an infinite loop for anything that isn't
GFP_NOFS. To address this we may want to migrate to using mempools for
extent states so that we will always have emergency reserves in order to
make our allocations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As of "btrfs: do not use GFP_ATOMIC in the read endio" we no longer have
any users of unlock_extent_atomic, remove it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have done read endio in an async thread for a very, very long time,
which makes the use of GFP_ATOMIC and unlock_extent_atomic() unneeded in
our read endio path. We've noticed under heavy memory pressure in our
fleet that we can fail these allocations, and then often trip a
BUG_ON(!allocation), which isn't an ideal outcome. Begin to address
this by simply not using GFP_ATOMIC, which will allow us to do things
like actually allocate a extent state when doing
set_extent_bits(UPTODATE) in the endio handler.
End io handlers are not called in atomic context, besides we have been
allocating failrec with GFP_NOFS so we'd notice there's a problem.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BACKGROUND]
When committing a transaction, we will update block group items for all
dirty block groups.
But in fact, dirty block groups don't always need to update their block
group items.
It's pretty common to have a metadata block group which experienced
several COW operations, but still have the same amount of used bytes.
In that case, we may unnecessarily COW a tree block doing nothing.
[ENHANCEMENT]
This patch will introduce btrfs_block_group::commit_used member to
remember the last used bytes, and use that new member to skip
unnecessary block group item update.
This would be more common for large filesystems, where metadata block
group can be as large as 1GiB, containing at most 64K metadata items.
In that case, if COW added and then deleted one metadata item near the
end of the block group, then it's completely possible we don't need to
touch the block group item at all.
[BENCHMARK]
The change itself can have quite a high chance (20~80%) to skip block
group item updates in lot of workloads.
As a result, it would result shorter time spent on
btrfs_write_dirty_block_groups(), and overall reduce the execution time
of the critical section of btrfs_commit_transaction().
Here comes a fio command, which will do random writes in 4K block size,
causing a very heavy metadata updates.
fio --filename=$mnt/file --size=512M --rw=randwrite --direct=1 --bs=4k \
--ioengine=libaio --iodepth=64 --runtime=300 --numjobs=4 \
--name=random_write --fallocate=none --time_based --fsync_on_close=1
The file size (512M) and number of threads (4) means 2GiB file size in
total, but during the full 300s run time, my dedicated SATA SSD is able
to write around 20~25GiB, which is over 10 times the file size.
Thus after we fill the initial 2G, we should not cause much block group
item updates.
Please note, the fio numbers by themselves don't have much change, but
if we look deeper, there is some reduced execution time, especially for
the critical section of btrfs_commit_transaction().
I added extra trace_printk() to measure the following per-transaction
execution time:
- Critical section of btrfs_commit_transaction()
By re-using the existing update_commit_stats() function, which
has already calculated the interval correctly.
- The while() loop for btrfs_write_dirty_block_groups()
Although this includes the execution time of btrfs_run_delayed_refs(),
it should still be representative overall.
Both result involves transid 7~30, the same amount of transaction
committed.
The result looks like this:
| Before | After | Diff
----------------------+-------------------+----------------+--------
Transaction interval | 229247198.5 | 215016933.6 | -6.2%
Block group interval | 23133.33333 | 18970.83333 | -18.0%
The change in block group item updates is more obvious, as skipped block
group item updates also mean less delayed refs.
And the overall execution time for that block group update loop is
pretty small, thus we can assume the extent tree is already mostly
cached. If we can skip an uncached tree block, it would cause more
obvious change.
Unfortunately the overall reduction in commit transaction critical
section is much smaller, as the block group item updates loop is not
really the major part, at least not for the above fio script.
But still we have a observable reduction in the critical section.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The base transaction bits can be defined as bits in a contiguous
sequence, although right now there's a hole from bit 1 to 8.
The bits are used for btrfs_trans_handle::type, and there's another set
of TRANS_STATE_* defines that are for btrfs_transaction::state. They are
mutually exclusive though the hole in the sequence looks like was made
for the states.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The defines/enums are used only for tracepoints and are not part of the
on-disk format.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Define helper macro that can be used in enum {} to utilize the automatic
increment to define all bits without directly defining the values or
using additional linear bits.
1. capture the sequence value, N
2. use the value to define the given enum with N-th bit set
3. reset the sequence back to N
Use for enums that do not require fixed values for symbolic names (like
for on-disk structures):
enum {
ENUM_BIT(FIRST),
ENUM_BIT(SECOND),
ENUM_BIT(THIRD)
};
Where the values would be 0x1, 0x2 and 0x4.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BACKGROUND]
In theory init_btrfs_fs() and exit_btrfs_fs() should match their
sequence, thus normally they should look like this:
init_btrfs_fs() | exit_btrfs_fs()
----------------------+------------------------
init_A(); |
init_B(); |
init_C(); |
| exit_C();
| exit_B();
| exit_A();
So is for the error path of init_btrfs_fs().
But it's not the case, some exit functions don't match their init
functions sequence in init_btrfs_fs().
Furthermore in init_btrfs_fs(), we need to have a new error label for
each new init function we added. This is not really expandable,
especially recently we may add several new functions to init_btrfs_fs().
[ENHANCEMENT]
The patch will introduce the following things to enhance the situation:
- struct init_sequence
Just a wrapper of init and exit function pointers.
The init function must use int type as return value, thus some init
functions need to be updated to return 0.
The exit function can be NULL, as there are some init sequence just
outputting a message.
- struct mod_init_seq[] array
This is a const array, recording all the initialization we need to do
in init_btrfs_fs(), and the order follows the old init_btrfs_fs().
- bool mod_init_result[] array
This is a bool array, recording if we have initialized one entry in
mod_init_seq[].
The reason to split mod_init_seq[] and mod_init_result[] is to avoid
section mismatch in reference.
All init function are in .init.text, but if mod_init_seq[] records
the @initialized member it can no longer be const, thus will be put
into .data section, and cause modpost warning.
For init_btrfs_fs() we just call all init functions in their order in
mod_init_seq[] array, and after each call, setting corresponding
mod_init_result[] to true.
For exit_btrfs_fs() and error handling path of init_btrfs_fs(), we just
iterate mod_init_seq[] in reverse order, and skip all uninitialized
entry.
With this patch, init_btrfs_fs()/exit_btrfs_fs() will be much easier to
expand and will always follow the strict order.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of btrfs_tree_mod_log_insert_key() are now passing a GFP_NOFS
flag to it, so remove the flag from it and from alloc_tree_mod_elem() and
use it directly within alloc_tree_mod_elem().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When fixing up the first key of each node above the current level, at
fixup_low_keys(), we are doing a GFP_ATOMIC allocation for inserting an
operation record for the tree mod log. However we can do just fine with
GFP_NOFS nowadays. The need for GFP_ATOMIC was for the old days when we
had custom locks with spinning behaviour for extent buffers and we were
in spinning mode while at fixup_low_keys(). Now we use rw semaphores for
extent buffer locks, so we can safely use GFP_NOFS.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I have observed the following case play out and lead to unnecessary
relocations:
1. write a file across multiple block groups
2. delete the file
3. several block groups fall below the reclaim threshold
4. reclaim the first, moving extents into the others
5. reclaim the others which are now actually very full, leading to poor
reclaim behavior with lots of writing, allocating new block groups,
etc.
I believe the risk of missing some reasonable reclaims is worth it
when traded off against the savings of avoiding overfull reclaims.
Going forward, it could be interesting to make the check more advanced
(zoned aware, fragmentation aware, etc...) so that it can be a really
strong signal both at extent delete and reclaim time.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
As we delete extents from a block group, at some deletion we cross below
the reclaim threshold. It is possible we are still in the middle of
deleting more extents and might soon hit 0. If the block group is empty
by the time the reclaim worker runs, we will still relocate it.
This works just fine, as relocating an empty block group ultimately
results in properly deleting it. However, we have more direct ways of
removing empty block groups in the cleaner thread. Those are either
async discard or the unused_bgs list. In fact, when we decide whether to
relocate a block group during extent deletion, we do check for emptiness
and prefer the discard/unused_bgs mechanisms when possible.
Not using relocation for this case reduces some modest overhead from
empty bg relocation:
- extra transactions
- extra metadata use/churn for creating relocation metadata
- trying to read the extent tree to look for extents (and in this case
finding none)
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During fiemap, when determining if a data extent is shared or not, if we
don't find the extent is directly shared, then we need to determine if
it's shared through subtrees. For that we need to resolve the indirect
reference we found in order to figure out the path in the inode's fs tree,
which is a path starting at the fs tree's root node and going down to the
leaf that contains the file extent item that points to the data extent.
We then proceed to determine if any extent buffer in that path is shared
with other trees or not.
However when the generation of the data extent is more recent than the
last generation used to snapshot the root, we don't need to determine
the path, since the data extent can not be shared through snapshots.
For this case we currently still determine the leaf of that path (at
find_parent_nodes(), but then stop determining the other nodes in the
path (at btrfs_is_data_extent_shared()) as it's pointless.
So do the check of the data extent's generation earlier, at
find_parent_nodes(), before trying to resolve the indirect reference to
determine the leaf in the path. This saves us from doing one expensive
b+tree search in the fs tree of our target inode, as well as other minor
work.
The following test was run on a non-debug kernel (Debian's default kernel
config):
$ cat test-fiemap.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
# Use compression to quickly create files with a lot of extents
# (each with a size of 128K).
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 extents, each with a size of 128K.
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
# Add some more files to increase the size of the fs and extent
# trees (in the real world there's a lot of files and extents
# from other files).
xfs_io -f -c "pwrite -S 0xcd -b 1M 0 20G" $MNT/file1
xfs_io -f -c "pwrite -S 0xef -b 1M 0 20G" $MNT/file2
xfs_io -f -c "pwrite -S 0x73 -b 1M 0 20G" $MNT/file3
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
echo
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1285 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 742 milliseconds (metadata cached)
After applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 689 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 393 milliseconds (metadata cached)
That's a -46.4% total reduction for the metadata not cached case, and
a -47.0% reduction for the cached metadata case.
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During fiemap, when determining if a data extent is shared or not, if we
don't find the extent is directly shared, then we need to determine if
it's shared through subtrees. For that we need to resolve the indirect
reference we found in order to figure out the path in the inode's fs tree,
which is a path starting at the fs tree's root node and going down to the
leaf that contains the file extent item that points to the data extent.
We then proceed to determine if any extent buffer in that path is shared
with other trees or not.
Currently whenever we find the data extent that a file extent item points
to is not directly shared, we always resolve the path in the fs tree, and
then check if any extent buffer in the path is shared. This is a lot of
work and when we have file extent items that belong to the same leaf, we
have the same path, so we only need to calculate it once.
This change does that, it keeps track of the current and previous leaf,
and when we find that a data extent is not directly shared, we try to
compute the fs tree path only once and then use it for every other file
extent item in the same leaf, using the existing cached path result for
the leaf as long as the cache results are valid.
This saves us from doing expensive b+tree searches in the fs tree of our
target inode, as well as other minor work.
The following test was run on a non-debug kernel (Debian's default kernel
config):
$ cat test-with-snapshots.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
# Use compression to quickly create files with a lot of extents
# (each with a size of 128K).
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 extents, each with a size of 128K.
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
# Add some more files to increase the size of the fs and extent
# trees (in the real world there's a lot of files and extents
# from other files).
xfs_io -f -c "pwrite -S 0xcd -b 1M 0 20G" $MNT/file1
xfs_io -f -c "pwrite -S 0xef -b 1M 0 20G" $MNT/file2
xfs_io -f -c "pwrite -S 0x73 -b 1M 0 20G" $MNT/file3
# Create a snapshot so all the extents become indirectly shared
# through subtrees, with a generation less than or equals to the
# generation used to create the snapshot.
btrfs subvolume snapshot -r $MNT $MNT/snap1
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
echo
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Result before applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1204 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 729 milliseconds (metadata cached)
Result after applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 732 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 421 milliseconds (metadata cached)
That's a -46.1% total reduction for the metadata not cached case, and
a -42.2% reduction for the cached metadata case.
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the static functions to lookup and store sharedness check of an
extent buffer to a location above find_all_parents(), because in the
next patch the lookup function will be used by find_all_parents().
The store function is also moved just because it's the counter part
to the lookup function and it's best to have their definitions close
together.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During fiemap we process all the file extent items of an inode, by their
file offset order (left to right b+tree order), and then check if the data
extent they point at is shared or not. Until now we didn't cache those
results, we only did it for b+tree nodes/leaves since for each unique
b+tree path we have access to hundreds of file extent items. However, it
is also common to repeat checking the sharedness of a particular data
extent in a very short time window, and the cases that lead to that are
the following:
1) COW writes.
If have a file extent item like this:
[ bytenr X, offset = 0, num_bytes = 512K ]
file offset 0 512K
Then a 4K write into file offset 64K happens, we end up with the
following file extent item layout:
[ bytenr X, offset = 0, num_bytes = 64K ]
file offset 0 64K
[ bytenr Y, offset = 0, num_bytes = 4K ]
file offset 64K 68K
[ bytenr X, offset = 68K, num_bytes = 444K ]
file offset 68K 512K
So during fiemap we well check for the sharedness of the data extent
with bytenr X twice. Typically for COW writes and for at least
moderately updated files, we end up with many file extent items that
point to different sections of the same data extent.
2) Writing into a NOCOW file after a snapshot is taken.
This happens if the target extent was created in a generation older
than the generation where the last snapshot for the root (the tree the
inode belongs to) was made.
This leads to a scenario like the previous one.
3) Writing into sections of a preallocated extent.
For example if a file has the following layout:
[ bytenr X, offset = 0, num_bytes = 1M, type = prealloc ]
0 1M
After doing a 4K write into file offset 0 and another 4K write into
offset 512K, we get the following layout:
[ bytenr X, offset = 0, num_bytes = 4K, type = regular ]
0 4K
[ bytenr X, offset = 4K, num_bytes = 508K, type = prealloc ]
4K 512K
[ bytenr X, offset = 512K, num_bytes = 4K, type = regular ]
512K 516K
[ bytenr X, offset = 516K, num_bytes = 508K, type = prealloc ]
516K 1M
So we end up with 4 consecutive file extent items pointing to the data
extent at bytenr X.
4) Hole punching in the middle of an extent.
For example if a file has the following file extent item:
[ bytenr X, offset = 0, num_bytes = 8M ]
0 8M
And then hole is punched for the file range [4M, 6M[, we our file
extent item split into two:
[ bytenr X, offset = 0, num_bytes = 4M ]
0 4M
[ 2M hole, implicit or explicit depending on NO_HOLES feature ]
4M 6M
[ bytenr X, offset = 6M, num_bytes = 2M ]
6M 8M
Again, we end up with two file extent items pointing to the same
data extent.
5) When reflinking (clone and deduplication) within the same file.
This is probably the least common case of all.
In cases 1, 2, 4 and 4, when we have multiple file extent items that point
to the same data extent, their distance is usually short, typically
separated by a few slots in a b+tree leaf (or across sibling leaves). For
case 5, the distance can vary a lot, but it's typically the less common
case.
This change caches the result of the sharedness checks for data extents,
but only for the last 8 extents that we notice that our inode refers to
with multiple file extent items. Whenever we want to check if a data
extent is shared, we lookup the cache which consists of doing a linear
scan of an 8 elements array, and if we find the data extent there, we
return the result and don't check the extent tree and delayed refs.
The array/cache is small so that doing the search has no noticeable
negative impact on the performance in case we don't have file extent items
within a distance of 8 slots that point to the same data extent.
Slots in the cache/array are overwritten in a simple round robin fashion,
as that approach fits very well.
Using this simple approach with only the last 8 data extents seen is
effective as usually when multiple file extents items point to the same
data extent, their distance is within 8 slots. It also uses very little
memory and the time to cache a result or lookup the cache is negligible.
The following test was run on non-debug kernel (Debian's default kernel
config) to measure the impact in the case of COW writes (first example
given above), where we run fiemap after overwriting 33% of the blocks of
a file:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
FILE_SIZE=$((1 * 1024 * 1024 * 1024))
# Create the file full of 1M extents.
xfs_io -f -s -c "pwrite -b 1M -S 0xab 0 $FILE_SIZE" $MNT/foobar
block_count=$((FILE_SIZE / 4096))
# Overwrite about 33% of the file blocks.
overwrite_count=$((block_count / 3))
echo -e "\nOverwriting $overwrite_count 4K blocks (out of $block_count)..."
RANDOM=123
for ((i = 1; i <= $overwrite_count; i++)); do
off=$(((RANDOM % block_count) * 4096))
xfs_io -c "pwrite -S 0xcd $off 4K" $MNT/foobar > /dev/null
echo -ne "\r$i blocks overwritten..."
done
echo -e "\n"
# Unmount and mount to clear all cached metadata.
umount $MNT
mount $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds"
umount $MNT
Result before applying this patch:
fiemap took 128 milliseconds
Result after applying this patch:
fiemap took 92 milliseconds (-28.1%)
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At find_parent_nodes(), at its last step, when iterating over all direct
references, we are checking if we have a share context and if we have
a reference with a different root from the one in the share context.
However that logic is pointless because of two reasons:
1) After the previous patch in the series (subject "btrfs: remove roots
ulist when checking data extent sharedness"), the roots argument is
always NULL when using a share check context (struct share_check), so
this code is never triggered;
2) Even before that previous patch, we could not hit this code because
if we had a reference with a root different from the one in our share
context, then we would have exited earlier when doing either of the
following:
- Adding a second direct ref to the direct refs red black tree
resulted in extent_is_shared() returning true when called from
add_direct_ref() -> add_prelim_ref(), after processing delayed
references or while processing references in the extent tree;
- When adding a second reference to the indirect refs red black
tree (same as above, extent_is_shared() returns true);
- If we only have one indirect reference and no direct references,
then when resolving it at resolve_indirect_refs() we immediately
return that the target extent is shared, therefore never reaching
that loop that iterates over all direct references at
find_parent_nodes();
- If we have 1 indirect reference and 1 direct reference, then we
also exit early because extent_is_shared() ends up returning true
when called through add_prelim_ref() (by add_direct_ref() or
add_indirect_ref()) or add_delayed_refs(). Same applies as when
having a combination of direct, indirect and indirect with missing
key references.
This logic had been obsoleted since commit 3ec4d3238a ("btrfs:
allow backref search checks for shared extents"), which introduced the
early exits in case an extent is shared.
So just remove that logic, and assert at find_parent_nodes() that when we
have a share context we don't have a roots ulist and that we haven't found
the extent to be directly shared after processing delayed references and
all references from the extent tree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_is_data_extent_shared() is passing a ulist for the roots
argument of find_parent_nodes(), however it does not use that ulist for
anything and for this context that list always ends up with at most one
element.
Since find_parent_nodes() is able to deal with a NULL ulist for its roots
argument, make btrfs_is_data_extent_shared() pass it NULL and avoid the
burden of allocating memory for the unnused roots ulist, initializing it,
releasing it and allocating one struct ulist_node for it during the call
to find_parent_nodes().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When calling btrfs_is_data_extent_shared() we pass two ulists that were
allocated by the caller. This is because the single caller, fiemap, calls
btrfs_is_data_extent_shared() multiple times and the ulists can be reused,
instead of allocating new ones before each call and freeing them after
each call.
Now that we have a context structure/object that we pass to
btrfs_is_data_extent_shared(), we can move those ulists to it, and hide
their allocation and the context's allocation in a helper function, as
well as the freeing of the ulists and the context object. This allows to
reduce the number of parameters passed to btrfs_is_data_extent_shared(),
the need to pass the ulists from extent_fiemap() to fiemap_process_hole()
and having the caller deal with allocating and releasing the ulists.
Also rename one of the ulists from 'tmp' / 'tmp_ulist' to 'refs', since
that's a much better name as it reflects what the list is used for (and
matching the argument name for find_parent_nodes()).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Right now we are using a struct btrfs_backref_shared_cache to pass state
across multiple btrfs_is_data_extent_shared() calls. The structure's name
closely follows its current purpose, which is to cache previous checks
for the sharedness of metadata extents. However we will start using the
structure for more things other than caching sharedness checks, so rename
it to struct btrfs_backref_share_check_ctx.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we pass a root and an inode number as arguments for
btrfs_is_data_extent_shared() and the inode number is always from an
inode that belongs to that root (it wouldn't make sense otherwise).
In every context that we call btrfs_is_data_extent_shared() (fiemap only),
we have an inode available, so directly pass the inode to the function
instead of a root and inode number. This reduces the number of parameters
and it makes the function's signature conform to most other functions we
have.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing backref walking to determine if an extent is shared, we are
testing if the inode number, stored in the 'inum' field of struct
share_check, is 0. However that can never be case, since the all instances
of the structure are created at btrfs_is_data_extent_shared(), which
always initializes it with the inode number from a fs tree (and the number
for any inode from any tree can never be 0). So remove the checks.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing backref walking to determine if an extent is shared, we are
testing the root_objectid of the given share_check struct is 0, but that
is an impossible case, since btrfs_is_data_extent_shared() always
initializes the root_objectid field with the id of the given root, and
no root can have an objectid of 0. So remove those checks.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When allocating an extent buffer, at __alloc_extent_buffer(), there's no
point in explicitly assigning zero to the bflags field of the new extent
buffer because we allocated it with kmem_cache_zalloc().
So just remove the redundant initialization, it saves one mov instruction
in the generated assembly code for x86_64 ("movq $0x0,0x10(%rax)").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_clone_extent_buffer(), before allocating the pages array for the
new extent buffer we are calling memset() to zero out the pages array of
the extent buffer. This is pointless however, because the extent buffer
already has every element in its pages array pointing to NULL, as it was
allocated with kmem_cache_zalloc(). The memset() was introduced with
commit dd137dd1f2 ("btrfs: factor out allocating an array of pages"),
but even before that commit we already depended on the pages array being
initialized to NULL for the error paths that need to call
btrfs_release_extent_buffer().
So remove the memset(), it's useless and slightly increases the object
text size.
Before this change:
$ size fs/btrfs/extent_io.o
text data bss dec hex filename
70580 5469 40 76089 12939 fs/btrfs/extent_io.o
After this change:
$ size fs/btrfs/extent_io.o
text data bss dec hex filename
70564 5469 40 76073 12929 fs/btrfs/extent_io.o
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During fiemap and lseek (hole and data seeking), there's no point in
iterating the inode's io tree to count delalloc bits if the inode's
delalloc bytes counter has a value of zero, as that counter is updated
whenever we set a range for delalloc or clear a range from delalloc.
So skip the counting and io tree iteration if the inode's delalloc bytes
counter has a value of zero. This helps save time when processing a file
range corresponding to a hole or prealloc (unwritten) extent.
This patch is part of a series comprised of the following patches:
btrfs: get the next extent map during fiemap/lseek more efficiently
btrfs: skip unnecessary extent map searches during fiemap and lseek
btrfs: skip unnecessary delalloc search during fiemap and lseek
The following test was performed on a release kernel (Debian's default
kernel config) before and after applying those 3 patches.
# Wrapper to call fiemap in extent count only mode.
# (struct fiemap::fm_extent_count set to 0)
$ cat fiemap.c
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <sys/ioctl.h>
#include <linux/fs.h>
#include <linux/fiemap.h>
int main(int argc, char **argv)
{
struct fiemap fiemap = { 0 };
int fd;
if (argc != 2) {
printf("usage: %s <path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_RDONLY);
if (fd < 0) {
fprintf(stderr, "error opening file: %s\n",
strerror(errno));
return 1;
}
/* fiemap.fm_extent_count set to 0, to count extents only. */
fiemap.fm_length = FIEMAP_MAX_OFFSET;
if (ioctl(fd, FS_IOC_FIEMAP, &fiemap) < 0) {
fprintf(stderr, "fiemap error: %s\n",
strerror(errno));
return 1;
}
close(fd);
printf("fm_mapped_extents = %d\n", fiemap.fm_mapped_extents);
return 0;
}
$ gcc -o fiemap fiemap.c
And the wrapper shell script that creates a file with many holes and runs
fiemap against it:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
FILE_SIZE=$((1 * 1024 * 1024 * 1024))
echo -n > $MNT/foobar
for ((off = 0; off < $FILE_SIZE; off += 8192)); do
xfs_io -c "pwrite -S 0xab $off 4K" $MNT/foobar > /dev/null
done
# flush all delalloc
sync
start=$(date +%s%N)
./fiemap $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds"
umount $MNT
Result before applying patchset:
fm_mapped_extents = 131072
fiemap took 63 milliseconds
Result after applying patchset:
fm_mapped_extents = 131072
fiemap took 39 milliseconds (-38.1%)
Running the same test for a 512M file instead of a 1G file, gave the
following results.
Result before applying patchset:
fm_mapped_extents = 65536
fiemap took 29 milliseconds
Result after applying patchset:
fm_mapped_extents = 65536
fiemap took 20 milliseconds (-31.0%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have no outstanding extents it means we don't have any extent maps
corresponding to delalloc that is flushing, as when an ordered extent is
created we increment the number of outstanding extents to 1 and when we
remove the ordered extent we decrement them by 1. So skip extent map tree
searches if the number of outstanding ordered extents is 0, saving time as
the tree is not empty if we have previously made some reads or flushed
delalloc, as in those cases it can have a very large number of extent maps
for files with many extents.
This helps save time when processing a file range corresponding to a hole
or prealloc (unwritten) extent.
The next patch in the series has a performance test in its changelog and
its subject is:
"btrfs: skip unnecessary delalloc search during fiemap and lseek"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At find_delalloc_subrange(), when we need to get the next extent map, we
do a full search on the extent map tree (a red black tree). This is fine
but it's a lot more efficient to simply use rb_next(), which typically
requires iterating over less nodes of the tree and never needs to compare
the ranges of nodes with the one we are looking for.
So add a public helper to extent_map.{h,c} to get the extent map that
immediately follows another extent map, using rb_next(), and use that
helper at find_delalloc_subrange().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For Btrfs RAID56, we have a caching system for btrfs raid bios (rbio).
We call cache_rbio_pages() to mark a qualified rbio ready for cache.
The timing happens at:
- finish_rmw()
At this timing, we have already read all necessary sectors, along with
the rbio sectors, we have covered all data stripes.
- __raid_recover_end_io()
At this timing, we have rebuild the rbio, thus all data sectors
involved (either from stripe or bio list) are uptodate now.
Thus at the timing of cache_rbio_pages(), we should have all data
sectors uptodate.
This patch will make it explicit that all data sectors are uptodate at
cache_rbio_pages() timing, mostly to prepare for the incoming
verification at RMW time.
This patch will add:
- Extra ASSERT()s in cache_rbio_pages()
This is to make sure all data sectors, which are not covered by bio,
are already uptodate.
- Extra ASSERT()s in steal_rbio()
Since only cached rbio can be stolen, thus every data sector should
already be uptodate in the source rbio.
- Update __raid_recover_end_io() to update recovered sector->uptodate
Previously __raid_recover_end_io() will only mark failed sectors
uptodate if it's doing an RMW.
But this can trigger new ASSERT()s, as for recovery case, a recovered
failed sector will not be marked uptodate, and trigger ASSERT() in
later cache_rbio_pages() call.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently inside alloc_rbio(), we allocate a larger memory to contain
the following members:
- struct btrfs_raid_rbio itself
- stripe_pages array
- bio_sectors array
- stripe_sectors array
- finish_pointers array
Then update rbio pointers to point the extra space after the rbio
structure itself.
Thus it introduced a complex CONSUME_ALLOC() macro to help the thing.
This is too hacky, and is going to make later pointers expansion harder.
This patch will change it to use regular kcalloc() for each pointer
inside btrfs_raid_bio, making the later expansion much easier.
And introduce a helper free_raid_bio_pointers() to free up all the
pointer members in btrfs_raid_bio, which will be used in both
free_raid_bio() and error path of alloc_rbio().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The cleanup involves two things:
- Remove the "__" prefix
There is no naming confliction.
- Remove the forward declaration
There is no special function call involved.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside of FB, as well as some user reports, we've had a consistent
problem of occasional ENOSPC transaction aborts. Inside FB we were
seeing ~100-200 ENOSPC aborts per day in the fleet, which is a really
low occurrence rate given the size of our fleet, but it's not nothing.
There are two causes of this particular problem.
First is delayed allocation. The reservation system for delalloc
assumes that contiguous dirty ranges will result in 1 file extent item.
However if there is memory pressure that results in fragmented writeout,
or there is fragmentation in the block groups, this won't necessarily be
true. Consider the case where we do a single 256MiB write to a file and
then close it. We will have 1 reservation for the inode update, the
reservations for the checksum updates, and 1 reservation for the file
extent item. At some point later we decide to write this entire range
out, but we're so fragmented that we break this into 100 different file
extents. Since we've already closed the file and are no longer writing
to it there's nothing to trigger a refill of the delalloc block rsv to
satisfy the 99 new file extent reservations we need. At this point we
exhaust our delalloc reservation, and we begin to steal from the global
reserve. If you have enough of these cases going in parallel you can
easily exhaust the global reserve, get an ENOSPC at
btrfs_alloc_tree_block() time, and then abort the transaction.
The other case is the delayed refs reserve. The delayed refs reserve
updates its size based on outstanding delayed refs and dirty block
groups. However we only refill this block reserve when returning
excess reservations and when we call btrfs_start_transaction(root, X).
We will reserve 2*X credits at transaction start time, and fill in X
into the delayed refs reserve to make sure it stays topped off.
Generally this works well, but clearly has downsides. If we do a
particularly delayed ref heavy operation we may never catch up in our
reservations. Additionally running delayed refs generates more delayed
refs, and at that point we may be committing the transaction and have no
way to trigger a refill of our delayed refs rsv. Then a similar thing
occurs with the delalloc reserve.
Generally speaking we well over-reserve in all of our block rsvs. If we
reserve 1 credit we're usually reserving around 264k of space, but we'll
often not use any of that reservation, or use a few blocks of that
reservation. We can be reasonably sure that as long as you were able to
reserve space up front for your operation you'll be able to find space
on disk for that reservation.
So introduce a new flushing state, BTRFS_RESERVE_FLUSH_EMERGENCY. This
gets used in the case that we've exhausted our reserve and the global
reserve. It simply forces a reservation if we have enough actual space
on disk to make the reservation, which is almost always the case. This
keeps us from hitting ENOSPC aborts in these odd occurrences where we've
not kept up with the delayed work.
Fixing this in a complete way is going to be relatively complicated and
time consuming. This patch is what I discussed with Filipe earlier this
year, and what I put into our kernels inside FB. With this patch we're
down to 1-2 ENOSPC aborts per week, which is a significant reduction.
This is a decent stop gap until we can work out a more wholistic
solution to these two corner cases.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are wrapped in CONFIG_FS_VERITY, but we can have the definitions
without verity enabled. Move these definitions up with the other
accessor helpers.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This uses btrfs_header_nritems, which I will be moving out of ctree.h.
In order to avoid needing to include the relevant header in ctree.h,
simply move this helper function into ctree.c.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename parameters ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is local to the free-space-cache.c code, remove it from ctree.h and
inode.c, create new init/exit functions for the cachep, and move it
locally to free-space-cache.c.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is local to the ctree code, remove it from ctree.h and inode.c,
create new init/exit functions for the cachep, and move it locally to
ctree.c.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is local to the transaction code, remove it from ctree.h and
inode.c, create new helpers in the transaction to handle the init work
and move the cachep locally to transaction.c.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This isn't used outside of inode.c, there's no reason to define it in
btrfs_inode.h. Drop the inline and add __cold as it's for errors that
are not in any hot path.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code is used in space-info.c, move the definitions to space-info.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function uses functions that are not defined in block-group.h, move
it into block-group.c in order to keep the header clean.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These definitions are used for discard statistics, move them out of
ctree.h and put them in free-space-cache.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is only used locally in scrub.c, move it out of ctree.h into
scrub.c.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have maximum link and name length limits, move these to btrfs_tree.h
as they're on disk limitations.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
This inline helper calls btrfs_fs_compat_ro(), which is defined in
another header. To avoid weird header dependency problems move this
helper into disk-io.c with the rest of the global root helpers.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bulk of our on-disk definitions exist in btrfs_tree.h, which user
space can use. Keep things consistent and move the rest of the on disk
definitions out of ctree.h into btrfs_tree.h. Note I did have to update
all u8's to __u8, but otherwise this is a strict copy and paste.
Most of the definitions are mainly for internal use and are not
guaranteed stable public API and may change as we need. Compilation
failures by user applications can happen.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments, style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of this definition was removed in patch f26c923860
("btrfs: remove reada infrastructure") so we can remove this definition.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This hasn't been used since 138a12d865 ("btrfs: rip out
btrfs_space_info::total_bytes_pinned") so it is safe to remove.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last users of these helpers were removed in 5297199a8b ("btrfs:
remove inode number cache feature") so delete these helpers.
The point was for mount options that were applicable after transaction
commit so they could not be applied immediately. We don't have such
options anymore and if we do the patch can be reverted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since leaf is already NULL, and no other branch will go to fail_unlock,
the fail_unlock label is useless and can be removed
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't use a cached state here at all, which generally makes sense as
async reads are going to unlock at endio time. However for blocking
reads we will call wait_extent_bit() for our range. Since the
lock_extent() stuff will return the cached_state for the start of the
range this is a helpful optimization to have for this case, we'll have
the exact state we want to wait on. Add a cached state here and simply
throw it away if we're a non-blocking read, otherwise we'll get a small
improvement by eliminating some tree searches.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we fail to lock a range we'll return the start of the range
that we failed to lock. We'll then search down to this range and wait
on any extent states in this range.
However we can avoid this search altogether if we simply cache the
extent_state that had the contention. We can pass this into
wait_extent_bit() and start from that extent_state without doing the
search. In the most optimistic case we can avoid all searches, more
likely we'll avoid the initial search and have to perform the search
after we wait on the failed state, or worst case we must search both
times which is what currently happens.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of the relocation code avoids using the cached state, despite
everywhere using the normal
lock_extent()
// do something
unlock_extent()
pattern. Fix this by plumbing a cached state throughout all of these
functions in order to allow for less tree searches.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that try_lock_extent() takes a cached_state, plumb the cached_state
through btrfs_try_lock_ordered_range() and then use a cached_state in
btrfs_check_nocow_lock everywhere to avoid extra tree searches on the
extent_io_tree.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With nowait becoming more pervasive throughout our codebase go ahead and
add a cached_state to try_lock_extent(). This allows us to be faster
about clearing the locked area if we have contention, and then gives us
the same optimization for unlock if we are able to lock the range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
address post-6.0 issues, which is hopefully a sign that things are
converging.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4pQpQAKCRDdBJ7gKXxA
jquxAP9Lqif7CGDgdq8uWY2hHS/Ujc3k7Ohgyzs37olnCuU8KwEA6/J7SpjsBgtY
OfzvnwxpCTh8Kfzu/oNckIHo/EEiIA8=
=o6qT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes, 11 marked cc:stable.
Only three or four of the latter address post-6.0 issues, which is
hopefully a sign that things are converging"
* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: take the right locks for page table retraction
mm: migrate: fix THP's mapcount on isolation
mm: introduce arch_has_hw_nonleaf_pmd_young()
mm: add dummy pmd_young() for architectures not having it
mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
madvise: use zap_page_range_single for madvise dontneed
mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
Syzbot reported a null-ptr-deref bug:
NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP
frequency < 30 seconds
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 3603 Comm: segctord Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google
10/11/2022
RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0
fs/nilfs2/alloc.c:608
Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00
00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7
RSP: 0018:ffffc90003dff830 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d
RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010
RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f
R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158
R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0
Call Trace:
<TASK>
nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline]
nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193
nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236
nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940
nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline]
nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline]
nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088
nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568
nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018
nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline]
nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045
nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline]
nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
...
If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().
If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.
Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().
This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.
Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com
Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The atomic_read was accidentally replaced with atomic_inc_return,
which prevents the server from getting cleaned up and causes rmmod
to hang with a warning:
Can't purge s=00000001
Fixes: 2757a4dc18 ("afs: Fix access after dec in put functions")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20221130174053.2665818-1-marc.dionne@auristor.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The fileserver probing code attempts to work out the best fileserver to
use for a volume by retrieving the RTT calculated by AF_RXRPC for the
probe call sent to each server and comparing them. Sometimes, however,
no RTT estimate is available and rxrpc_kernel_get_srtt() returns false,
leading good fileservers to be given an RTT of UINT_MAX and thus causing
the rotation algorithm to ignore them.
Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return
value and just take the estimated RTT it provides - which will be capped
at 1 second.
Fixes: 1d4adfaf65 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY4SQxQAKCRDh3BK/laaZ
PAWSAP9WHL4ejQtVu2NMaEhZyIxs3weXLrFMPcQqOJ5JZhrgGAD/d6JufR/4jKWK
Sf/VLPsDlXsvPyCMJOSZAsQ5Bt1reA4=
=57DJ
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression introduced in -rc4"
* tag 'fuse-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: lock inode unconditionally in fuse_fallocate()
-----BEGIN PGP SIGNATURE-----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=89M+
-----END PGP SIGNATURE-----
Merge tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two small cifs/smb3 client fixes:
- an unlock missing in an error path in copychunk_range found by
xfstest 476
- a fix for a use after free in a debug code path"
* tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix missing unlock in cifs_file_copychunk_range()
cifs: Use after free in debug code
