With the upcoming multitile support each tile will have its own
local memory. Mark the current LMEM with the suffix '0' to
emphasise that it belongs to the root tile.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-2-andi.shyti@linux.intel.com
On integrated it looks like the GGTT base should always 1:1 maps to
somewhere within DSM. On discrete the base seems to be pre-programmed with
a normal lmem address, and is not 1:1 mapped with the base address. On
such devices probe the lmem address directly from the PTE.
v2(Ville):
- The base is actually the pre-programmed GGTT address, which is then
meant to 1:1 map to somewhere inside dsm. In the case of dgpu the
base looks to just be some offset within lmem, but this also happens
to be the exact dsm start, on dg1. Therefore we should only need to
fudge the physical address, before allocating from stolen.
- Bail if it's not located in dsm.
v3:
- Scratch that. There doesn't seem to be any relationship with the
base and PTE address, on at least DG1. Let's instead just grab the
lmem address from the PTE itself.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-7-matthew.auld@intel.com
When system does not have mappable aperture, ggtt->mappable_end=0. In
this case if we pass PIN_MAPPABLE when pinning vma, the pinning code
will return -ENOSPC. So conditionally set PIN_MAPPABLE if HAS_GMCH().
Suggested-by: Chris P Wilson <chris.p.wilson@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Ap Kamal <kamal.ap@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-6-matthew.auld@intel.com
Add a generic interface for allocating an object at some specific
offset, and convert stolen over. Later we will want to hook this up to
different backends.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-4-matthew.auld@intel.com
Since we are actually mapping the object and not the vma, when dealing
with LMEM, we should be careful and use the backing store size here,
since the vma->node.size could have all kinds of funny padding
constraints, which could result in us writing to OOB address.
v2(Chris):
- Prefer vma->size here, which should be the backing store size. Some
more rework is needed here to stop using node.size in some other
places.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304095934.925036-1-matthew.auld@intel.com
vms are not getting properly closed. Rather than fixing that,
Remove the vm open count and instead rely on the vm refcount.
The vm open count existed solely to break the strong references the
vmas had on the vms. Now instead make those references weak and
ensure vmas are destroyed when the vm is destroyed.
Unfortunately if the vm destructor and the object destructor both
wants to destroy a vma, that may lead to a race in that the vm
destructor just unbinds the vma and leaves the actual vma destruction
to the object destructor. However in order for the object destructor
to ensure the vma is unbound it needs to grab the vm mutex. In order
to keep the vm mutex alive until the object destructor is done with
it, somewhat hackishly grab a vm_resv refcount that is released late
in the vma destruction process, when the vm mutex is no longer needed.
v2: Address review-comments from Niranjana
- Clarify that the struct i915_address_space::skip_pte_rewrite is a hack
and should ideally be replaced in an upcoming patch.
- Remove an unneeded continue in clear_vm_list and update comment.
v3:
- Documentation update
- Commit message formatting
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-2-thomas.hellstrom@linux.intel.com
With small LMEM-BAR we need to be able to differentiate between the
total size of LMEM, and how much of it is CPU mappable. The end goal is
to be able to utilize the entire range, even if part of is it not CPU
accessible.
v2: also update intelfb_create
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-1-matthew.auld@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
In the past we had a need to differentiate TGL U and TGL Y, there
was a different voltage swing table for each subplatform and some PCI
ids of this subplatforms are shared but it turned out that it was a
specification mistake and the voltage swing table was indeed the same
but we went ahead with that patch because we needed to differentiate
TGL U and Y from TGL H and by that time TGL H was embargoed so that
was the perfect way to land it upstream.
Now the embargo for TGL H is long past and now we even have
INTEL_TGL_12_GT1_IDS with all TGL H ids, so we can drop this PCI root
check and only rely in the PCI ids to differentiate TGL U and Y from
TGL H that actually has code differences.
Besides the simplification this will fix issues in virtualization
environments where the PCI root is virtualized and don't have the same
id as actual hardware.
v2:
- add and set INTEL_SUBPLATFORM_UY
Cc: Fred Gao <fred.gao@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222141424.35165-1-jose.souza@intel.com
Currently we just leave the old gunk lying around in the crtc
state when userspace asks us to fully disable the crtc. That
doesn't match what the state would be had we never even enabled
the crtc in the first place. So let's make this consistent and
call intel_crtc_prepare_cleared_state() for disabled crtcs as well
(excluding bigjoiner slaves of course which have had their state
copied from the master).
I actually already did this once in commit fff13e63a1 ("drm/i915:
Clear most of crtc state when disabling the crtc") but then
commit 19f65a3dbf ("drm/i915: Try to make bigjoiner work in atomic
check") undid it all :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215202601.22943-1-manasi.d.navare@intel.com
Add display workaround # 1309179469 , which fixes a PHY hang when
switching from TBT mode to DP-alt/legacy mode. The workaround also
requires an IFWI/PHY firmware change, before that this change has no
effect (the DKL_PCS_DW5/SOFTRESET flag is always cleared).
HSDES: 18018237866
HSDES: 16014473319
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218122611.767974-1-imre.deak@intel.com
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated
usage. Split the register macros to separated files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
The VBT DSI video transfer mode field values have been defined in terms
of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that
to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though
the shift is different.
Make a clean break and disassociate the values from each other. Assume
the values can be different, and translate the VBT value to VLV and ICL
register values as needed. Use the existing macros from intel_bios.h.
This will be useful in splitting the DSI register macros to files by DSI
implementation.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-1-jani.nikula@intel.com
DG2 supports a 5th display output which the hardware refers to as "TC1,"
even though it isn't a Type-C output. This behaves similarly to the TC1
on past platforms with just a couple minor differences:
* DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
ICP/TGP/ADP.
* DG2 doesn't need the hpd inversion setting that we had to use on DG1
v2:
intel_ddi_init(dev_priv, PORT_TC1); [Matt]
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
Our early understanding of DG2 was incorrect; since the 5th display
isn't actually a Type-C output, 38.4 MHz input clocks are never used on
this platform and we can drop the corresponding MPLLB tables.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-2-lucas.demarchi@intel.com
Currently ICL_PHY_MISC macro is returning offset 0x64C10 for PHY_E.
The PORT_TC1 port is not yet enabled properly in the driver, but
intel_phy_snps.c is relying on intel_phy_is_snps() to filter out
unavailable phys. That function was already considering the last phy as
available. Just correct the offset of the last phy to 0x64C14 as the
rest of the support for it is coming on next commits.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-1-lucas.demarchi@intel.com
If the only thing that is changing is SAGV vs. no SAGV but
the number of active planes and the total data rates end up
unchanged we currently bail out of intel_bw_atomic_check()
early and forget to actually compute the new WGV point
mask and thus won't actually enable/disable SAGV as requested.
This ends up poorly if we end up running with SAGV enabled
when we shouldn't. Usually ends up in underruns.
To fix this let's go through the QGV point mask computation
if either the data rates/number of planes, or the state
of SAGV is changing.
v2: Check more carefully if things are changing to avoid
the extra calculations/debugs from introducing unwanted
overhead
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Fixes: 20f505f225 ("drm/i915: Restrict qgv points which don't have enough bandwidth.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com
Reading the PIPECONF enable bit out from the hardware
in i9xx_set_pipeconf() on i830 is pointless as the bit should
always be set since we keep both pipes constantly running on
i830. Drop the pointless read and just always keep the bit set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
The CHV CGM CSC registers are single buffered and so we
may have to write them from the vblank worker, which
imposes very tight dealines. Drop the pointless locking
for the register accessess to reduce the overhead.
All the other registers we bash from the vblank worker
(LUTs) were already made lockless earlier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
The pipe/output CSC register writes don't need to be locked
since all the registers are suitably isolated to their own
cachelines. So eliminate the locks to reduce the overhead
during the vblank evade critical section.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
We don't want any RMWs in the part of the commit that happens
under vblank evasion. Eventually we want to use the DSB to
handle that and it can't read registers at all. Also reads
are just slowing us down needlessly.
Let's move the whole PIPE_CHICKEN stuff out from the critical
section since we don't have anything there that needs to be
syncrhonized with other plane/pipe registers. If we ever need
to add such things then we have to move it back, but without
doing any reads.
TODO: should look into eliminating the RMW anyway...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Grouping inside of the same if all the programing sequences and
workarounds of PSR2.
The order of programing changed in intel_psr_enable_source() but
it will not affect PSR2 as at this point PSR2_ENABLE is still disabled.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210185223.95399-1-jose.souza@intel.com
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
BIOS may leave a TypeC PHY in a connected state even though the
corresponding port is disabled. This will prevent any hotplug events
from being signalled (after the monitor deasserts and then reasserts its
HPD) until the PHY is disconnected and so the driver will not detect a
connected sink. Rebooting with the PHY in the connected state also
results in a system hang.
Fix the above by disconnecting TypeC PHYs on disabled ports.
Before commit 64851a32c4 the PHY connected state was read out even
for disabled ports and later the PHY got disconnected as a side effect
of a tc_port_lock/unlock() sequence (during connector probing), hence
recovering the port's hotplug functionality.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014
Fixes: 64851a32c4 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state")
Cc: <stable@vger.kernel.org> # v5.16+
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
v2: Change the naming convention a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-2-ville.syrjala@linux.intel.com
Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.
For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):
* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000
v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.
Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com
adlp+ adds some extra bits to the QGV point mask. The code attempts
to handle that but forgot to actually make sure we can store those
bits in the bw state. Fix it.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb767 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Exfiltrate intel_plane_atomic_calc_changes() and its friends from
intel_display.c to intel_atomic_plane.c since that is a much better
fit.
While at it also nuke the official looking kernel docs for
intel_wm_need_update() and flag it for eventual destruction so
that people don't get any wrong ideas about using it in new code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.
It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.
Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Often using pipes is more convenient than crtc indices.
Convert the current for_each_intel_crtc_mask() to take a
pipe mask instead of a crtc index mask, and rename it to
for_each_intel_crtc_in_pipe_mask() to make it clear what
it does.
The current users of for_each_intel_crtc_mask() don't really
care which kind of mask we use, but for other uses a pipe
mask if better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
