1075 Commits

Author	SHA1	Message	Date
Linus Torvalds	49d5759268	ARM: ... - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place. - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company). - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests. - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM. - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested. - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems. - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor. - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host. - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer This also drags in arm64's 'for-next/sme2' branch, because both it and the PSCI relay changes touch the EL2 initialization code. RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Two patches sorting out confusion between virtual and physical addresses, which currently are the same on s390. - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization. - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O 9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV /WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw== =goe1 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company) - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Sort out confusion between virtual and physical addresses, which currently are the same on s390 - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits) KVM: SVM: hyper-v: placate modpost section mismatch error KVM: x86/mmu: Make tdp_mmu_allowed static KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes KVM: arm64: nv: Filter out unsupported features from ID regs KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2 KVM: arm64: nv: Allow a sysreg to be hidden from userspace only KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2 KVM: arm64: nv: Handle SMCs taken from virtual EL2 KVM: arm64: nv: Handle trapped ERET from virtual EL2 KVM: arm64: nv: Inject HVC exceptions to the virtual EL2 KVM: arm64: nv: Support virtual EL2 exceptions KVM: arm64: nv: Handle HCR_EL2.NV system register traps KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state KVM: arm64: nv: Add EL2 system registers to vcpu context KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set KVM: arm64: nv: Introduce nested virtualization VCPU feature KVM: arm64: Use the S2 MMU context to iterate over S2 table ...	2023-02-25 11:30:21 -08:00
Linus Torvalds	90ddb3f034	pci-v6.3-changes ... -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmP2dbsUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vzBDg//aW2IeJYku5ENXwwnCQjBlyjBGOOZ 456KGpFt/ky0N9Jp0ZS3nQSa5YN7q+L8XY48gu6I7s1hXly8iLZKLrJN++S//k55 BadXu7mDUyVoY74LYvBe0nlXuwJul2qnq9IJLufRucrn1yoyqApAh39IRdCzi4U8 mP+wad7sQA0Si4bpf80uwn6Yq8SrDoO0mtmO/dZSXJooM2t2SnDXEL/fxMwTNDA4 XsVSP9FrbPmcTLo8mkDa8Dy7JKbL6KQJF9yDlmYzuA2spQpTf+YLLfsNnmE+850h WTtfCjVaYtlik7i9qTB+VcN1CsGVepYKK3H5the16Aeql2Fu+Ji5KSt74C220Yi9 ZSDA93d/EfGc5egKyBdUUMFgqhe46srRUAoWcMrx2T4ARGuOm5EYCa9C8C7dFmO0 j6f9MYL3j2Sw3FROEKViRVOFfbIfVW1TXIo3x0fE0ud3xkg73eKp/++X8QeTMjox 2ArY2AWPNQpUI1oMlKxlSEd5XjFf7n/hHDtFqj9bIuJzt0/8wXQf0jCYTjhpGkRB pmO+lColK6lp+bg8aWRRkiwN73xGdQhKaeXLo0Iq4T6xr0Lb3XoskHZvt6NIGe/A ds5/uwtErq6kCf2G9YG1xfh+G1bimbjWwsHCNfSNXzTsWGDFTCb8tvqF90m+7+yl bllxTXA6PO312Tw= =/y4d -----END PGP SIGNATURE----- Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...	2023-02-24 16:51:40 -08:00
Linus Torvalds	17cd4d6f05	TTY/Serial driver updates for 6.3-rc1 ... Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A SEAnnokGCDtA/BNIXeES =luRi -----END PGP SIGNATURE----- Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...	2023-02-24 12:17:14 -08:00
Linus Torvalds	b72b5fecc1	tracing updates for 6.3: ... - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3 dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc= =M82D -----END PGP SIGNATURE----- Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ...	2023-02-23 10:20:49 -08:00
Linus Torvalds	6861eaf791	ATA changes for 6.3-rc1 ... * Small cleanup of the pata_octeon driver to drop a useless platform callback, from Uwe. * Simplify ata_scsi_cmd_error_handler() code using the fact that ap->ops->error_handler is NULL most of the time, from Wenchao. * Several patches improving libata error handling. This is in preparation for supporting the command duration limits (CDL) feature. The changes allow handling corner cases of ATA NCQ errors which do not happen with regular drives but will be triggered with CDL drives. From Niklas. * Simplify the qc_fill_rtf operation, from me. * Improve SCSI command translation for the REPORT_SUPPORTED_OPERATION_CODES command, from me. * Cleanup of libata FUA handling. This falls short of enabling FUA for ATA drives that support it by default as there were concerns that old drives would break. The series howeverfixes several issues with the FUA support to ensure that FUA is reported as being supported only for drives that can handle all possible write cases (NCQ and non-NCQ). A check in the block layer is also added to ensure that we never see read FUA commands (current behavior). From me. * Several patches to move the old PARIDE (parallel port IDE) driver to libata as pata_parport. Given that this driver also needs protocol modules, the driver code resides in its own pata_parport directoy under drivers/ata. From Ondrej. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY/VTnQAKCRDdoc3SxdoY dk77AQCA1frczKhcOFe2PK/FsFAiO9Nlx/snk7V95JdjVG8GlwEAkey7mvbXMfX0 fDbqpaCkWFb6SvwxdMSATlqUvwEpSQ8= =tqQP -----END PGP SIGNATURE----- Merge tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA updates from Damien Le Moal: - Small cleanup of the pata_octeon driver to drop a useless platform callback (Uwe) - Simplify ata_scsi_cmd_error_handler() code using the fact that ap->ops->error_handler is NULL most of the time (Wenchao) - Several patches improving libata error handling. This is in preparation for supporting the command duration limits (CDL) feature. The changes allow handling corner cases of ATA NCQ errors which do not happen with regular drives but will be triggered with CDL drives (Niklas) - Simplify the qc_fill_rtf operation (me) - Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES command (me) - Cleanup of libata FUA handling. This falls short of enabling FUA for ATA drives that support it by default as there were concerns that old drives would break. The series however fixes several issues with the FUA support to ensure that FUA is reported as being supported only for drives that can handle all possible write cases (NCQ and non-NCQ). A check in the block layer is also added to ensure that we never see read FUA commands (current behavior) (me) - Several patches to move the old PARIDE (parallel port IDE) driver to libata as pata_parport. Given that this driver also needs protocol modules, the driver code resides in its own pata_parport directoy under drivers/ata (Ondrej) * tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: Fix ida_alloc return value error check drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport drivers/block: Remove PARIDE core and high-level protocols ata: pata_parport: add driver (PARIDE replacement) ata: libata: exclude FUA support for known buggy drives ata: libata: Fix FUA handling in ata_build_rw_tf() ata: libata: cleanup fua support detection ata: libata: Rename and cleanup ata_rwcmd_protocol() ata: libata: Introduce ata_ncq_supported() block: add a sanity check for non-write flush/fua bios ata: libata-scsi: improve ata_scsiop_maint_in() ata: libata-scsi: do not overwrite SCSI ML and status bytes ata: libata: move NCQ related ATA_DFLAGs ata: libata: respect successfully completed commands during errors ata: libata: read the shared status for successful NCQ commands once ata: libata: simplify qc_fill_rtf port operation interface ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH ata: libata-eh: Cleanup ata_scsi_cmd_error_handler() ata: octeon: Drop empty platform remove function	2023-02-22 13:35:51 -08:00
Linus Torvalds	70756b49be	It has been a moderately calm cycle for documentation; the significant ... changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ...and the usual set of typo fixes and such. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmPzkQUPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YC0QH/09u10xV3N+RuveNE/tArVxKcQi7JZd/xugQ toSXygh64WY10lzwi7Ms1bHZzpPYB0fOrqTGNqNQuhrVTjQzaZB0BBJqm8lwt2w/ S/Z5wj+IicJTmQ7+0C2Hc/dcK5SCPfY3CgwqOUVdr3dEm1oU+4QaBy31fuIJJ0Hx NdbXBco8BZqJX9P67jwp9vbrFrSGBjPI0U4HNHVjrWlcBy8JT0aAnf0fyWFy3orA T86EzmEw8drA1mXsHa5pmVwuHDx2X+D+eRurG9llCBrlIG9EDSmnalY4BeGqR4LS oDrEH6M91I5+9iWoJ0rBheD8rPclXO2HpjXLApXzTjrORgEYZsM= =MCdX -----END PGP SIGNATURE----- Merge tag 'docs-6.3' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...	2023-02-22 12:00:20 -08:00
Linus Torvalds	5b7c4cabbb	Networking changes for 6.3. ... Core ---- - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols --------- - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF --- - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter --------- - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt. races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API ---------- - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers ---------------------- - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers ------- - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - enetc: support XDP_REDIRECT for XDP non-linear buffers - enetc: improve reconfig, avoid link flap and waiting for idle - enetc: support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation. Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ 7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW 9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4 LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1 Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI= =xXhC -----END PGP SIGNATURE----- Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...	2023-02-21 18:24:12 -08:00
Linus Torvalds	877934769e	- Cache the AMD debug registers in per-CPU variables to avoid MSR writes ... where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmP1RDIACgkQEsHwGGHe VUohBw//ZB9ZRqsrKdm6D9YaP2x4Zb+kqKqo6rjYeWaYqyPyCwDujPwh+pb3Oq1t aj62muDv1t/wEJc8mKNkfXkjEEtBVAOcpb5YIpKreoEvNKyevol83Ih0u5iJcTRE E5qf8HDS8b/JZrcazJJLl6WQmQNH5RiKSu5bbCpRhoeOcyo5pRYR5MztK9vNmAQk GMdwHsUSU+jN8uiE4HnpaOb/luhgFindRwZVTpdjJegQWLABS8cl3CKeTv4+PW45 isvv37XnQP248wsptIEVRHeG6g3g/HtvwRx7DikUw06QwUyUK7H9hJssOoSP8TL9 u4psRwfWnJ1OxU6klL+s0Ii+pjQ97wXmK/oqK7QkdUwhWqR/mQAW2e9kWHAngyDn A6mKbzSM6HFAeSXQpB9cMb6uvYRD44SngDFe3WXtEK8jiiQ70ikUm4E28I5KJOPg s+RyioHk0NFRHYSOOBqNG1NKz6ED7L3GbgbbzxkgMh21AAyI3X351t+PtGoLV5ew eqOsM7lbg9Scg1LvPk1JcoALS8USWqgar397rz9qGUs+OkPWBtEBCmTdMz/Eb+2t g/WHdLS5/ajSs5gNhT99W3DeqZMPDEkgBRSeyBBmY3CUD3gBL2wXEktRXv504zBR RC4oyUPX3c9E2ib6GATLE3kBLbcz9hTWbMxF+X3lLJvTVd/Qc2o= =v/ZC -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: - Cache the AMD debug registers in per-CPU variables to avoid MSR writes where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups * tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd: Cache debug register values in percpu variables KVM: x86: Propagate the AMD Automatic IBRS feature to the guest x86/cpu: Support AMD Automatic IBRS x86/cpu, kvm: Add the SMM_CTL MSR not present feature x86/cpu, kvm: Add the Null Selector Clears Base feature x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code x86/cpu, kvm: Add support for CPUID_80000021_EAX x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h> x86/gsseg: Use the LKGS instruction if available for load_gs_index() x86/gsseg: Move load_gs_index() to its own new header file x86/gsseg: Make asm_load_gs_index() take an u16 x86/opcode: Add the LKGS instruction to x86-opcode-map x86/cpufeature: Add the CPU feature bit for LKGS x86/bugs: Reset speculation control settings on init x86/cpu: Remove redundant extern x86_read_arch_cap_msr()	2023-02-21 14:51:40 -08:00
Linus Torvalds	2504ba8b01	Power management updates for 6.3-rc1 ... - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya). - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang). - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney). - Enable thermal cooling for Tegra194 (Yi-Wei Wang). - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss). - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi). - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh). - Make cpufreq_unregister_driver() return void (Uwe Kleine-König). - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski). - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing). - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann). - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh). - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki). - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski). - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald). - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald). - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap). - Fix possible name leak in powercap_register_zone() (Yang Yingliang). - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui). - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada). - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui). - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman). - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio). - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler). - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmPuJfMSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRx/5kQAJNOVImLEPLerLP8xufw30//LuDU5Gi0 STsyDOMql/I2MpkeqeCcgrSbpy6NlEglOvg16gfpQ3qqTCLF9ypENxs9E5BGGvW0 aEdCzvaoqmvi9PCr/jmj0EPP70/U+rIX5m/k0QdjLh9x0aLoAEe3uRJTfR9QVqXf I7JX0N9kjKi7YxpA5DlkHrS7J7GPPiWlesJ3p4wXuHMo3jf+6fgkoPFt8yRrGWeh AHzGT2BLrsy7aAUjGZB65Qx9q3fnSXMmXOjmn0Xh2njQah+zRZDwrNzwoY2HTLL/ KQ6/Ww16USYRZtCS1fmGwAj9I+ddq6AOvhPCMn0vLXXmKVAMUrVVWnQS/0+vpm9y suUMK9Tndkgxd1vjby2246ThJn27uDd/ERFan4ouQo2j22uICY+SDo3osj2hMXka wq4zthXkY8KgjZ+MuXnZxPhcOvo8KRvfxAU0fy5efQnSkbtwY9UlMvjPBMBHm/RA 21/6kjQNtq5vMmI37oC8DH+oPrRQ7sUKuY7HNqwO9P3QNKWVmNe7cF5UtXXxME7Q ULvP1d+u+TNNdHFLryPwCSzBO34wQEccdRZBjalZ8tBe6JiDWUFHC3giSURZSuzZ GDvzVaNX6PkgToyv4inBTB8lTp6pAuUjaWNvNJzVvUXiEKHB0ihzg5vpJW5NdwlH 15Tn8cjH7pp0 =lZLx -----END PGP SIGNATURE----- Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...	2023-02-21 12:13:58 -08:00
Linus Torvalds	8cc01d43f8	RCU pull request for v6.3 ... This pull request contains the following branches: doc.2023.01.05a: Documentation updates. fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably: o Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks. o Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized. o Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have doen this for mnay years.) o Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases.) kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark. This series also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh). srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture. It also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another. srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option. There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window. tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes: o A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang. o A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period. o A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU. torture.2023.01.05a: Torture-test updates and fixes. torturescript.2023.01.03a: Torture-test scripting updates and fixes. stall.2023.01.09a: Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmPq29UTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jAhVEACEAKJY1VJ9IUqz7CwzAYkzgRJfiygh oDUXmlqtm6ew9pr2GdLUVCVsUSldzBc0K7Djb/G1niv4JPs+v7YwupIV33+UbStU Qxt6ztTdxc4lKospLm1+2vF9ZdzVEmiP4wVCc4iDarv5FM3FpWSTNc8+L7qmlC+X myjv+GqMTxkXZBvYJOgJGFjDwN8noTd7Fr3mCCVLFm3PXMDa7tcwD6HRP5AqD2N8 qC5M6LEqepKVGmz0mYMLlSN1GPaqIsEcexIFEazRsPEivPh/iafyQCQ/cqxwhXmV vEt7u+dXGZT/oiDq9cJ+/XRDS2RyKIS6dUE14TiiHolDCn1ONESahfA/gXWKykC2 BaGPfjWXrWv/hwbeZ+8xEdkAvTIV92tGpXir9Fby1Z5PjP3balvrnn6hs5AnQBJb NdhRPLzy/dCnEF+CweAYYm1qvTo8cd5nyiNwBZHn7rEAIu3Axrecag1rhFl3AJ07 cpVMQXZtkQVa2X8aIRTUC+ijX6yIqNaHlu0HqNXgIUTDzL4nv5cMjOMzpNQP9/dZ FwAMZYNiOk9IlMiKJ8ZiVcxeiA8ouIBlkYM3k6vGrmiONZ7a/EV/mSHoJqI8bvqr AxUIJ2Ayhg3bxPboL5oKgCiLql0A7ZVvz6quX6McitWGMgaSvel1fDzT3TnZd41e 4AFBFd/+VedUGg== =bBYK -----END PGP SIGNATURE----- Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ...	2023-02-21 10:45:51 -08:00
Linus Torvalds	560b803067	Updates for timekeeping, timers and clockevent/source drivers: ... Core: - Yet another round of improvements to make the clocksource watchdog more robust: - Relax the clocksource-watchdog skew criteria to match the NTP criteria. - Temporarily skip the watchdog when high memory latencies are detected which can lead to false-positives. - Provide an option to enable TSC skew detection even on systems where TSC is marked as reliable. Sigh! - Initialize the restart block in the nanosleep syscalls to be directed to the no restart function instead of doing a partial setup on entry. This prevents an erroneous restart_syscall() invocation from corrupting user space data. While such a situation is clearly a user space bug, preventing this is a correctness issue and caters to the least suprise principle. - Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout() to align it with the nanosleep semantics. Drivers: - The obligatory new driver bindings for Mediatek, Rockchip and RISC-V variants. - Add support for the C3STOP misfeature to the RISC-V timer to handle the case where the timer stops in deeper idle state. - Set up a static key in the RISC-V timer correctly before first use. - The usual small improvements and fixes all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmPzV+cTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoYlDEACMrjN2F6qeiOW94t4nQ3qP1M9AMSgO OihC04XuM14/3tEviu/cUOd60wYcUQ/kfI5C+IL35ezeP2w9lnuKqeFpG7aDOa33 5F3isDPamJdXZEZs44CW15brR6dqDlEi5acKee/TtFV9mN6xNhzxM64IaFqecPmW P+BTwunB8xwquY8RzsHXor/GOGb6mqWQIPoHEPnywTDe/xQYWt0Exzi7ch6HQr5Z ZzHG6X4h6UTNimjay6L4qsRQWILmPIg4Z5IlycWMQ8qDFM0lbnIJqkG4JwceolI6 aRQyLe3NQFcPYgq3ue+SNm4RckYn4NbAa1zFm0d5VDgKp4xW1sxvtkxOJuxjaOw2 /rLkHkmyuVvCeTMAySfxrwnszAoM505CHC6CEYc1xELbeCkROFUaymtVyNFnnTru V/Jt/T2Gyx6tOrafX7u+djUjv9figddRpNbskVZvEi3Ztq4MQ069nK3oSUqtP5vO INApNg4lq6s8aGqVE+Kp9+CKwGqZqI4MdxQMNMAmCRLPon6apActVawbj18qO/wS qblQ0cbF8a16itlQ3V68qmhcPh6EZOuq8II4etNq6U0ulV9712WfMbat3z53LG94 QNkAmZ3/wui93I+Q2NPxhf5ybJFQZhR0SOtVO6xIdTgOntkODwzzGu9UapfD8mLb k5BpWnH8CoUgiw== =I67j -----END PGP SIGNATURE----- Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for timekeeping, timers and clockevent/source drivers: Core: - Yet another round of improvements to make the clocksource watchdog more robust: - Relax the clocksource-watchdog skew criteria to match the NTP criteria. - Temporarily skip the watchdog when high memory latencies are detected which can lead to false-positives. - Provide an option to enable TSC skew detection even on systems where TSC is marked as reliable. Sigh! - Initialize the restart block in the nanosleep syscalls to be directed to the no restart function instead of doing a partial setup on entry. This prevents an erroneous restart_syscall() invocation from corrupting user space data. While such a situation is clearly a user space bug, preventing this is a correctness issue and caters to the least suprise principle. - Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout() to align it with the nanosleep semantics. Drivers: - The obligatory new driver bindings for Mediatek, Rockchip and RISC-V variants. - Add support for the C3STOP misfeature to the RISC-V timer to handle the case where the timer stops in deeper idle state. - Set up a static key in the RISC-V timer correctly before first use. - The usual small improvements and fixes all over the place" * tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ clocksource/drivers/em_sti: Mark driver as non-removable clocksource/drivers/sh_tmu: Mark driver as non-removable clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use clocksource/drivers/timer-microchip-pit64b: Add delay timer clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx dt-bindings: timer: mediatek,mtk-timer: add MT8365 clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback clocksource/drivers/sh_cmt: Mark driver as non-removable clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST clocksource/drivers/riscv: Increase the clock source rating clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT dt-bindings: timer: Add bindings for the RISC-V timer device RISC-V: time: initialize hrtimer based broadcast clock event device dt-bindings: timer: rk-timer: Add rktimer for rv1126 time/debug: Fix memory leak with using debugfs_lookup() clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime() clocksource: Verify HPET and PMTMR when TSC unverified ...	2023-02-21 09:45:13 -08:00
Jintack Lim	675cabc899	arm64: Add ARM64_HAS_NESTED_VIRT cpufeature ... Add a new ARM64_HAS_NESTED_VIRT feature to indicate that the CPU has the ARMv8.3 nested virtualization capability, together with the 'kvm-arm.mode=nested' command line option. This will be used to support nested virtualization in KVM. Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jintack Lim <jintack.lim@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> [maz: moved the command-line option to kvm-arm.mode] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230209175820.1939006-2-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>	2023-02-11 09:16:11 +00:00
Yafang Shao	b6c1a8af5b	mm: memcontrol: add new kernel parameter cgroup.memory=nobpf ... Add new kernel parameter cgroup.memory=nobpf to allow user disable bpf memory accounting. This is a preparation for the followup patch. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Link: https://lore.kernel.org/r/20230210154734.4416-2-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>	2023-02-10 18:59:56 -08:00
Steven Rostedt (Google)	9c1c251d67	tracing: Allow boot instances to have snapshot buffers ... Add to ftrace_boot_snapshot, "=<instance>" name, where the instance will get a snapshot buffer, and will take a snapshot at the end of boot (which will save the boot traces). Link: https://lkml.kernel.org/r/20230207173026.792774721@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-02-07 12:49:56 -05:00
Steven Rostedt (Google)	c484648083	tracing: Add enabling of events to boot instances ... Add the format of: trace_instance=foo,sched:sched_switch,irq_handler_entry,initcall That will create the "foo" instance and enable the sched_switch event (here were the "sched" system is explicitly specified), the irq_handler_entry event, and all events under the system initcall. Link: https://lkml.kernel.org/r/20230207173026.386114535@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-02-07 12:49:56 -05:00
Steven Rostedt (Google)	cb1f98c5e5	tracing: Add creation of instances at boot command line ... Add kernel command line to add tracing instances. This only creates instances at boot but still does not enable any events to them. Later changes will extend this command line to add enabling of events, filters, and triggers. As well as possibly redirecting trace_printk()! Link: https://lkml.kernel.org/r/20230207173026.186210158@goodmis.org Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-02-07 12:49:56 -05:00
Paul E. McKenney	0051293c53	clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested ... Unconditionally enabling TSC watchdog checking of the HPET and PMTMR clocksources can degrade latency and performance. Therefore, provide a new "watchdog" option to the tsc= boot parameter that opts into such checking. Note that tsc=watchdog is overridden by a tsc=nowatchdog regardless of their relative positions in the list of boot parameters. Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Waiman Long <longman@redhat.com>	2023-02-06 16:38:30 -08:00
Perry Yuan	5014603e40	Documentation: introduce amd pstate active mode kernel command line options ... AMD Pstate driver support another firmware based autonomous mode with "amd_pstate=active" added to the kernel command line. In autonomous mode SMU firmware decides frequencies at runtime based on workload utilization, usage in other IPs, infrastructure limits such as power, thermals and so on. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2023-02-03 21:59:42 +01:00
Paul E. McKenney	bba8d3d17d	Merge branch 'stall.2023.01.09a' into HEAD ... stall.2023.01.09a: RCU CPU stall-warning updates.	2023-02-02 16:40:07 -08:00
Feng Tang	a7ec817d55	x86/tsc: Add option to force frequency recalibration with HW timer ... The kernel assumes that the TSC frequency which is provided by the hardware / firmware via MSRs or CPUID(0x15) is correct after applying a few basic consistency checks. This disables the TSC recalibration against HPET or PM timer. As a result there is no mechanism to validate that frequency in cases where a firmware or hardware defect is suspected. And there was case that some user used atomic clock to measure the TSC frequency and reported an inaccuracy issue, which was later fixed in firmware. Add an option 'recalibrate' for 'tsc' kernel parameter to force the tsc freq recalibration with HPET or PM timer, and warn if the deviation from previous value is more than about 500 PPM, which provides a way to verify the data from hardware / firmware. There is no functional change to existing work flow. Recently there was a real-world case: "The 40ms/s divergence between TSC and HPET was observed on hardware that is quite recent" [1], on that platform the TSC frequence 1896 MHz was got from CPUID(0x15), and the force-reclibration with HPET/PMTIMER both calibrated out value of 1975 MHz, which also matched with check from software 'chronyd', indicating it's a problem of BIOS or firmware. [Thanks tglx for helping improving the commit log] [ paulmck: Wordsmith Kconfig help text. ] [1]. https://lore.kernel.org/lkml/20221117230910.GI4001@paulmck-ThinkPad-P17-Gen-1/ Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: <x86@kernel.org> Cc: <linux-doc@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2023-02-02 14:22:52 -08:00
Bjorn Helgaas	a568375ba1	printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= ... Document the fact that CONFIG_BOOT_PRINTK_DELAY must be enabled for the "boot_delay" kernel parameter to work. Also mention that "lpj=" may be necessary. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230126225420.1320276-1-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2023-02-02 11:31:38 -07:00
Randy Dunlap	dbeb56fe80	Documentation: admin-guide: correct spelling ... Correct spelling problems for Documentation/admin-guide/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: dm-devel@redhat.com Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-media@vger.kernel.org Cc: linux-mm@kvack.org Link: https://lore.kernel.org/r/20230129231053.20863-2-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2023-02-02 11:04:42 -07:00
Ross Zwisler	2abfcd293b	docs: ftrace: always use canonical ftrace path ... The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many parts of Documentation still reference this older debugfs path, so let's update them to avoid confusion. Signed-off-by: Ross Zwisler <zwisler@google.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230125213251.2013791-1-zwisler@google.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2023-01-31 14:02:30 -07:00
Ondrej Zary	7750d8b510	drivers/block: Remove PARIDE core and high-level protocols ... Remove PARIDE core and high level protocols, taking care not to break low-level drivers (used by pata_parport). Also update documentation. Signed-off-by: Ondrej Zary <linux@zary.sk> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>	2023-01-31 10:41:32 +09:00
Kim Phillips	e7862eda30	x86/cpu: Support AMD Automatic IBRS ... The AMD Zen4 core supports a new feature called Automatic IBRS. It is a "set-and-forget" feature that means that, like Intel's Enhanced IBRS, h/w manages its IBRS mitigation resources automatically across CPL transitions. The feature is advertised by CPUID_Fn80000021_EAX bit 8 and is enabled by setting MSR C000_0080 (EFER) bit 21. Enable Automatic IBRS by default if the CPU feature is present. It typically provides greater performance over the incumbent generic retpolines mitigation. Reuse the SPECTRE_V2_EIBRS spectre_v2_mitigation enum. AMD Automatic IBRS and Intel Enhanced IBRS have similar enablement. Add NO_EIBRS_PBRSB to cpu_vuln_whitelist, since AMD Automatic IBRS isn't affected by PBRSB-eIBRS. The kernel command line option spectre_v2=eibrs is used to select AMD Automatic IBRS, if available. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Sean Christopherson <seanjc@google.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/20230124163319.2277355-8-kim.phillips@amd.com	2023-01-25 17:16:01 +01:00
Babu Moger	a76f65c89f	x86/resctrl: Include new features in command line options ... Add the command line options to enable or disable the new resctrl features: smba: Slow Memory Bandwidth Allocation bmec: Bandwidth Monitor Event Configuration. Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20230113152039.770054-6-babu.moger@amd.com	2023-01-23 17:38:38 +01:00
Sohil Mehta	17f0669cff	x86/vsyscall: Fix documentation to reflect the default mode ... The default vsyscall mode has been updated from emulate to xonly for a while. Update the kernel-parameters doc to reflect that. Fixes: 625b7b7f79 ("x86/vsyscall: Change the default vsyscall mode to xonly") Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230111193211.1987047-1-sohil.mehta@intel.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2023-01-19 14:46:50 -07:00
Ricardo Ribalda	374b30f27f	earlycon: Let users set the clock frequency ... Some platforms, namely AMD Picasso, use non standard uart clocks (48M), witch makes it impossible to use with earlycon. Let the user select its own frequency. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221123-serial-clk-v3-1-49c516980ae0@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-01-19 14:56:44 +01:00
Damien Le Moal	4d2e4980a5	ata: libata: cleanup fua support detection ... Move the detection of a device FUA support from ata_scsiop_mode_sense()/ata_dev_supports_fua() to device scan time in ata_dev_configure(). The function ata_dev_config_fua() is introduced to detect if a device supports FUA and this support is indicated using the new device flag ATA_DFLAG_FUA. In order to blacklist known buggy devices, the horkage flag ATA_HORKAGE_NO_FUA is introduced. Similarly to other horkage flags, the libata.force= arguments "fua" and "nofua" are also introduced to allow a user to control this horkage flag through the "force" libata module parameter. The ATA_DFLAG_FUA device flag is set only and only if all the following conditions are met: * libata.fua module parameter is set to 1 * The device supports the WRITE DMA FUA EXT command, * The device is not marked with the ATA_HORKAGE_NO_FUA flag, either from the blacklist or set by the user with libata.force=nofua * The device supports NCQ (while this is not mandated by the standards, this restriction is introduced to avoid problems with older non-NCQ devices). Enabling or diabling libata FUA support for all devices can now also be done using the "force=[no]fua" module parameter when libata.fua is set to 1. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>	2023-01-14 07:32:42 +09:00
Vidya Sagar	bba5065963	PCI/AER: Configure ECRC only if AER is native ... As the ECRC configuration bits are part of AER registers, configure ECRC only if AER is natively owned by the kernel. Link: https://lore.kernel.org/r/20230112072111.20063-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>	2023-01-12 12:24:37 -06:00
Zhen Lei	be42f00b73	rcu: Add RCU stall diagnosis information ... Because RCU CPU stall warnings are driven from the scheduling-clock interrupt handler, a workload consisting of a very large number of short-duration hardware interrupts can result in misleading stall-warning messages. On systems supporting only a single level of interrupts, that is, where interrupts handlers cannot be interrupted, this can produce misleading diagnostics. The stack traces will show the innocent-bystander interrupted task, not the interrupts that are at the very least exacerbating the stall. This situation can be improved by displaying the number of interrupts and the CPU time that they have consumed. Diagnosing other types of stalls can be eased by also providing the count of softirqs and the CPU time that they consumed as well as the number of context switches and the task-level CPU time consumed. Consider the following output given this change: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (1250 ticks this GP) <omitted> rcu: hardirqs softirqs csw/system rcu: number: 624 45 0 rcu: cputime: 69 1 2425 ==> 2500(ms) This output shows that the number of hard and soft interrupts is small, there are no context switches, and the system takes up a lot of time. This indicates that the current task is looping with preemption disabled. The impact on system performance is negligible because snapshot is recorded only once for all continuous RCU stalls. This added debugging information is suppressed by default and can be enabled by building the kernel with CONFIG_RCU_CPU_STALL_CPUTIME=y or by booting with rcupdate.rcu_cpu_stall_cputime=1. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2023-01-05 12:21:11 -08:00
Paul E. McKenney	92987fe8bd	rcu: Allow expedited RCU CPU stall warnings to dump task stacks ... This commit introduces the rcupdate.rcu_exp_stall_task_details kernel boot parameter, which cause expedited RCU CPU stall warnings to dump the stacks of any tasks blocking the current expedited grace period. Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2023-01-03 17:47:44 -08:00
Randy Dunlap	42551b8d3e	Documentation: admin: move OOO entries in kernel-parameters.txt ... Fix the most blatant out-of-order entries in kernel-parameters.txt. No changes other than modifying the order of the entries. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/20221204013050.11496-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2023-01-02 16:18:22 -07:00
Linus Torvalds	b8fd76f418	IOMMU Updates for Linux v6.2 ... Including: - Core code: - map/unmap_pages() cleanup - SVA and IOPF refactoring - Clean up and document return codes from device/domain attachment code - AMD driver: - Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and ivrs_acpihid command line options - Some smaller cleanups - Intel driver: - Blocking domain support - Cleanups - S390 driver: - Fixes and improvements for attach and aperture handling - PAMU driver: - Resource leak fix and cleanup - Rockchip driver: - Page table permission bit fix - Mediatek driver: - Improve safety from invalid dts input - Smaller fixes and improvements - Exynos driver: - Fix driver initialization sequence - Sun50i driver: - Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever - Various other fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmOd1PQACgkQK/BELZcB GuO7NxAAiwJUO99pTwvqnByzcC783AuE/fqKHDb9DZaN6Cr0VXSbKEwm8Lc2PC00 2CTwK/zGhy8BKBQnPiooJ+YOMPjE4yhFIF9jr5ASH5AVWv8EEFpo8zIFKAcF5rh/ c2Y5RIUwsGXuhR7U3lMTw84r39TZG2eHPwTEU6KvEJ1LCOMyD8IBYrZK2rvpGpem 3swXUfF5bQGAT8LlIFN7p+qsVs6ZtuD40qre3kerjrBtCPUMlxIIV5TJ8oQTecsk vKpD51mEVW+rjUKvqui8NDYuPfT76F2FPS37dfA1F36p8dmsMGSrtWngNm73r546 AmY8Gui6wKsv4Qn7Mxv49f/WZIXzdRTXOKx/zhYvvGxu7keqQIRIWYcLSxqfaGku cqJT401Ws1NHmRpx/t90lMH/anY5+kUMRTQG9Iq5ruLhExskd0SJcffa1i7YIGIe lPCTDf7MOXfDudR0Dtp87pGZQBaSkrSzZvb7qZY3Bj83WGZnLPpl6Z3N8KbkGzEO zNNvv1CtxZnIPrdOaKvfxQlAKiWKxkPRHuqk1TE8hkoNOe5ZgdOSJP5SeCrZ5tEf qljPXvDVF9f8CYw7QlfEDnbLnqDMGZpPAGqKPItbaijQLPZx4Jm4dw6+7i9hETIa wJ+1R9iAf+qiR0rlqueALKRaI4DjE8RU8yYSDpn2kn0BUOhWmb8= =ZM/m -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core code: - map/unmap_pages() cleanup - SVA and IOPF refactoring - Clean up and document return codes from device/domain attachment AMD driver: - Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and ivrs_acpihid command line options - Some smaller cleanups Intel driver: - Blocking domain support - Cleanups S390 driver: - Fixes and improvements for attach and aperture handling PAMU driver: - Resource leak fix and cleanup Rockchip driver: - Page table permission bit fix Mediatek driver: - Improve safety from invalid dts input - Smaller fixes and improvements Exynos driver: - Fix driver initialization sequence Sun50i driver: - Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever - Various other fixes" * tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits) iommu/mediatek: Fix forever loop in error handling iommu/mediatek: Fix crash on isr after kexec() iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY iommu/amd: Fix typo in macro parameter name iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data iommu/mediatek: Improve safety for mediatek,smi property in larb nodes iommu/mediatek: Validate number of phandles associated with "mediatek,larbs" iommu/mediatek: Add error path for loop of mm_dts_parse iommu/mediatek: Use component_match_add iommu/mediatek: Add platform_device_put for recovering the device refcnt iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() iommu/vt-d: Use real field for indication of first level iommu/vt-d: Remove unnecessary domain_context_mapped() iommu/vt-d: Rename domain_add_dev_info() iommu/vt-d: Rename iommu_disable_dev_iotlb() iommu/vt-d: Add blocking domain support iommu/vt-d: Add device_block_translation() helper iommu/vt-d: Allocate pasid table in device probe path iommu/amd: Check return value of mmu_notifier_register() iommu/amd: Fix pci device refcount leak in ppr_notifier() ...	2022-12-19 08:34:39 -06:00
Linus Torvalds	5f6e430f93	powerpc updates for 6.2 ... - Add powerpc qspinlock implementation optimised for large system scalability and paravirt. See the merge message for more details. - Enable objtool to be built on powerpc to generate mcount locations. - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is restricted to the patching CPU. - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI. - Sanitise user registers on interrupt entry on 64-bit Book3S. - Many other small features and fixes. Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmOfrj8THG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgIWtD/9mGF/ze2k+qFTo+30fb7bO8WJIDgsR dIASnZjXV7q/45elvymhUdkQv4R7xL3pzC40P1+ZKtWzGTNe+zWUQLoALNwRK85j 8CsxZbqefGNKE5Z6ZHo9s37wsu3+jJu9yEQpGFo1LINyzeclCn5St5oqfRam+Hd/ cPF+VfvREwZ0+YOKGBhJ2EgC+Gc9xsFY7DLQsoYlu71iZZr6Z6rgZW/EY5h3RMGS YKBoVwDsWaU0FpFWrr/rYTI6DqSr3AHr1+ftDg7ncCZMD6vQva6aMCCt94aLB1aE vC+DNdhZlA558bXGa5yA7Wr//7aUBUIwyC60DogOeZ6vw3kD9tdEd1fbH5hmqNKY K5bfqm28XU2959CTE8RDgsYYZvwDcfrjBIML14WZGdCQOTcGKpgOGp22o6yNb1Pq JKpHHnVpvu2PZ/p2XdKSm9+etr2yI6lXZAEVTS7ehdtMukButjSHEVbSCEZ8tlWz KokQt2J23BMHuSrXK6+67wWQBtdsLEk+LBOQmweiwarMocqvL/Zjz/5J7DR2DtH8 wlY3wOtB1+E5j7xZ+RgK3c3jNg5dH39ZwvFsSATWTI3P+iq6OK/bbk4q4LmZt2l9 ZIfH/CXPf9BvGCHzHa3AAd3UBbJLFwj17btMEv1wFVPS0T4LPUzkgTNTNUYeP6zL h1e5QfgUxvKPuQ== =7k3p -----END PGP SIGNATURE----- Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add powerpc qspinlock implementation optimised for large system scalability and paravirt. See the merge message for more details - Enable objtool to be built on powerpc to generate mcount locations - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is restricted to the patching CPU - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI - Sanitise user registers on interrupt entry on 64-bit Book3S - Many other small features and fixes Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, and Wolfram Sang. * tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits) powerpc/code-patching: Fix oops with DEBUG_VM enabled powerpc/qspinlock: Fix 32-bit build powerpc/prom: Fix 32-bit build powerpc/rtas: mandate RTAS syscall filtering powerpc/rtas: define pr_fmt and convert printk call sites powerpc/rtas: clean up includes powerpc/rtas: clean up rtas_error_log_max initialization powerpc/pseries/eeh: use correct API for error log size powerpc/rtas: avoid scheduling in rtas_os_term() powerpc/rtas: avoid device tree lookups in rtas_os_term() powerpc/rtasd: use correct OF API for event scan rate powerpc/rtas: document rtas_call() powerpc/pseries: unregister VPA when hot unplugging a CPU powerpc/pseries: reset the RCU watchdogs after a LPM powerpc: Take in account addition CPU node when building kexec FDT powerpc: export the CPU node count powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state powerpc/dts/fsl: Fix pca954x i2c-mux node names cxl: Remove unnecessary cxl_pci_window_alignment() selftests/powerpc: Fix resource leaks ...	2022-12-19 07:13:33 -06:00
Linus Torvalds	fe36bb8736	Tracing updates for 6.2: ... - Add options to the osnoise tracer o panic_on_stop option that panics the kernel if osnoise is greater than some user defined threshold. o preempt option, to test noise while preemption is disabled o irq option, to test noise when interrupts are disabled - Add .percent and .graph suffix to histograms to give different outputs - Add nohitcount to disable showing hitcount in histogram output - Add new __cpumask() to trace event fields to annotate that a unsigned long array is a cpumask to user space and should be treated as one. - Add trace_trigger kernel command line parameter to enable trace event triggers at boot up. Useful to trace stack traces, disable tracing and take snapshots. - Fix x86/kmmio mmio tracer to work with the updates to lockdep - Unify the panic and die notifiers - Add back ftrace_expect reference that is used to extract more information in the ftrace_bug() code. - Have trigger filter parsing errors show up in the tracing error log. - Updated MAINTAINERS file to add kernel tracing mailing list and patchwork info - Use IDA to keep track of event type numbers. - And minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY5vIcxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qlO7AQCmtZbriadAR6N7Llj092YXmYfzrxyi 1WS35vhpZsBJ8gEA8j68l+LrgNt51N2gXlTXEHgXzdBgL/TKAPSX4D99GQY= =z1pe -----END PGP SIGNATURE----- Merge tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add options to the osnoise tracer: - 'panic_on_stop' option that panics the kernel if osnoise is greater than some user defined threshold. - 'preempt' option, to test noise while preemption is disabled - 'irq' option, to test noise when interrupts are disabled - Add .percent and .graph suffix to histograms to give different outputs - Add nohitcount to disable showing hitcount in histogram output - Add new __cpumask() to trace event fields to annotate that a unsigned long array is a cpumask to user space and should be treated as one. - Add trace_trigger kernel command line parameter to enable trace event triggers at boot up. Useful to trace stack traces, disable tracing and take snapshots. - Fix x86/kmmio mmio tracer to work with the updates to lockdep - Unify the panic and die notifiers - Add back ftrace_expect reference that is used to extract more information in the ftrace_bug() code. - Have trigger filter parsing errors show up in the tracing error log. - Updated MAINTAINERS file to add kernel tracing mailing list and patchwork info - Use IDA to keep track of event type numbers. - And minor fixes and clean ups * tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits) tracing: Fix cpumask() example typo tracing: Improve panic/die notifiers ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY kernels tracing: Do not synchronize freeing of trigger filter on boot up tracing: Remove pointer (asterisk) and brackets from cpumask_t field tracing: Have trigger filter parsing errors show up in error_log x86/mm/kmmio: Remove redundant preempt_disable() tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line Documentation/osnoise: Add osnoise/options documentation tracing/osnoise: Add preempt and/or irq disabled options tracing/osnoise: Add PANIC_ON_STOP option Documentation/osnoise: Escape underscore of NO_ prefix tracing: Fix some checker warnings tracing/osnoise: Make osnoise_options static tracing: remove unnecessary trace_trigger ifdef ring-buffer: Handle resize in early boot up tracing/hist: Fix issue of losting command info in error_log tracing: Fix issue of missing one synthetic field tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' tracing/hist: Fix wrong return value in parse_action_params() ...	2022-12-15 18:01:16 -08:00
Linus Torvalds	a594533df0	drm for 6.2: ... Initial accel subsystem support. There are no drivers yet, just the framework. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmOXxI0ACgkQDHTzWXnE hr4NyBAAojK3N+XJf2b8LWuRKsShCr5FXlteEDxiYGLeB8/g4x3LztSfHgUg0iuS nP1m7Cx4snXcVNS6iyOsoZVq1EGUAWvv+mPWJe1UywjpyqtciTVQ11GEHRvI/w+V GRvkhmt/TsoZA0QIlS2MaOmhn9j17QOcuYTUjYdyRL4tsrHWrTASH5W1Jt2xmDyw 5FUJvfukPWm100DVWbh6hWbCKL22bDDF/nj1H+G6hYSyTjVbk7wZ0vy2m6TnIHNF iyBHBIzFPg3BveiSlKe6aVX7Gq2d8bfqjHsgN5f1qcS4ejWEkHLVxJtBdOB+fOSC 7o8Ms7WHi1AmnkOVCGRIjJ0cJrLZu2HDlyhViguAO1XQ3Jvuo/4WW3mplv+YPOMc c+P/zuPG42d4lrISuB8wspTdOgxmqpZDkg3HE6n1+jiVR0u4hTTYktoPnLsHX6KG l/l2B6aVAxE4b6P0q3ofYoAnk5rNsb1YUS+a8kC6f97TQ3gmOsN75iZXD/ASHg2r ozhh2wcFxIPkJhE7vqLWPIBCWQs93sGyQXoI7Q0TJaIAZTXV0VmO1BIofetpVImE 7FhDC4wvBedXywN8NYUEFbCTOnIcDMteM/i6S1ns78s5UjDa5osPuS5I02VT1lbN tvnJoHNkhCt13lJz63b0HNFm3cPKoRosCQhJeshyUYaFKs+evL0= =pABG -----END PGP SIGNATURE----- Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy" * tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits) drm/amdgpu: fix mmhub register base coding error drm/amdgpu: add tmz support for GC IP v11.0.4 drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4 drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4 drm/amdgpu: enable GFX IP v11.0.4 CG support drm/amdgpu: Make amdgpu_ring_mux functions as static drm/amdgpu: generally allow over-commit during BO allocation drm/amd/display: fix array index out of bound error in DCN32 DML drm/amd/display: 3.2.215 drm/amd/display: set optimized required for comp buf changes drm/amd/display: Add debug option to skip PSR CRTC disable drm/amd/display: correct DML calc error of UrgentLatency drm/amd/display: correct static_screen_event_mask drm/amd/display: Ensure commit_streams returns the DC return code drm/amd/display: read invalid ddc pin status cause engine busy drm/amd/display: Bypass DET swath fill check for max clocks drm/amd/display: Disable uclk pstate for subvp pipes drm/amd/display: Fix DCN2.1 default DSC clocks drm/amd/display: Enable dp_hdmi21_pcon support drm/amd/display: prevent seamless boot on displays that don't have the preferred dig ...	2022-12-13 11:59:58 -08:00
Linus Torvalds	268325bda5	Random number generator updates for Linux 6.2-rc1. ... -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmOU+U8ACgkQSfxwEqXe A67NnQ//Y5DltmvibyPd7r1TFT2gUYv+Rx3sUV9ZE1NYptd/SWhhcL8c5FZ70Fuw bSKCa1uiWjOxosjXT1kGrWq3de7q7oUpAPSOGxgxzoaNURIt58N/ajItCX/4Au8I RlGAScHy5e5t41/26a498kB6qJ441fBEqCYKQpPLINMBAhe8TQ+NVp0rlpUwNHFX WrUGg4oKWxdBIW3HkDirQjJWDkkAiklRTifQh/Al4b6QDbOnRUGGCeckNOhixsvS waHWTld+Td8jRrA4b82tUb2uVZ2/b8dEvj/A8CuTv4yC0lywoyMgBWmJAGOC+UmT ZVNdGW02Jc2T+Iap8ZdsEmeLHNqbli4+IcbY5xNlov+tHJ2oz41H9TZoYKbudlr6 /ReAUPSn7i50PhbQlEruj3eg+M2gjOeh8OF8UKwwRK8PghvyWQ1ScW0l3kUhPIhI PdIG6j4+D2mJc1FIj2rTVB+Bg933x6S+qx4zDxGlNp62AARUFYf6EgyD6aXFQVuX RxcKb6cjRuFkzFiKc8zkqg5edZH+IJcPNuIBmABqTGBOxbZWURXzIQvK/iULqZa4 CdGAFIs6FuOh8pFHLI3R4YoHBopbHup/xKDEeAO9KZGyeVIuOSERDxxo5f/ITzcq APvT77DFOEuyvanr8RMqqh0yUjzcddXqw9+ieufsAyDwjD9DTuE= =QRhK -----END PGP SIGNATURE----- Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ...	2022-12-12 16:22:22 -08:00
Linus Torvalds	47477c84b8	s390 updates for 6.2 merge window ... - Factor out handle_write() function and simplify 3215 console write operation. - When 3170 terminal emulator is connected to the 3215 console driver the boot time could be very long due to limited buffer space or missing operator input. Add con3215_drop command line parameter and con3215_drop sysfs attribute file to instruct the kernel drop console data when such conditions are met. - Fix white space errors in 3215 console driver. - Move enum paiext_mode definition to a header file and rename it to paievt_mode to indicate this is now used for several events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with PAI_MODE_SAMPLING. - Simplify the logic of PMU pai_crypto mapped buffer reference counter and make it consistent with PMU pai_ext. - Rename PMU pai_crypto mapped buffer structure member users to active_events to make it consistent with PMU pai_ext. - Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per 2G hugetlb page (~1.6%). - Use generic serial.h, bugs.h, shmparam.h and vga.h header files and scrap s390-specific versions. - The generic percpu setup code does not expect the s390-like implementation and emits a warning. To get rid of that warning and provide sane CPU-to-node and CPU-to-CPU distance mappings implementat a minimal version of setup_per_cpu_areas(). - Use kstrtobool() instead of strtobool() for re-IPL sysfs device attributes. - Avoid unnecessary lookup of a pointer to MSI descriptor when setting IRQ affinity for a PCI device. - Get rid of "an incompatible function type cast" warning by changing debug_sprintf_format_fn() function prototype so it matches the debug_format_proc_t function type. - Remove unused info_blk_hdr__pcpus() and get_page_state() functions. - Get rid of clang "unused unused insn cache ops function" warning by moving s390_insn definition to a private header. - Get rid of clang "unused function" warning by making function raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is enabled. - Use kstrobool() to parse sclp_con_drop parameter to make it identical to the con3215_drop parameter and allow passing values like "yes" and "true". - Use sysfs_emit() for all SCLP sysfs show functions, which is the current standard way to generate output strings. - Make SCLP con_drop sysfs attribute also writable and allow to change its value during runtime. This makes SCLP console drop handling consistent with the 3215 device driver. - Virtual and physical addresses are indentical on s390. However, there is still a confusion when pointers are directly casted to physical addresses or vice versa. Use correct address converters virt_to_phys() and phys_to_virt() for s390 channel IO drivers. - Support for power managemant has been removed from s390 since quite some time. Remove unused power managemant code from the appldata device driver. - Allow memory tools like KASAN see memory accesses from the checksum code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does. - Add support of ECKD DASDs disks so it could be used as boot and dump devices. - Follow checkpatch recommendations and use octal values instead of S_IRUGO and S_IWUSR for dump device attributes in sysfs. - Changes to vx-insn.h do not cause a recompile of C files that use asm(".include \"asm/vx-insn.h\"\n") magic to access vector instruction macros from inline assemblies. Add wrapper include header file to avoid this problem. - Use vector instruction macros instead of byte patterns to increase register validation routine readability. - The current machine check register validation handling does not take into account various scenarios and might lead to killing a wrong user process or potentially ignore corrupted FPU registers. Simplify logic of the machine check handler and stop the whole machine if the previous context was kerenel mode. If the previous context was user mode, kill the current task. - Introduce sclp_emergency_printk() function which can be used to emit a message in emergency cases. It is supposed to be used in cases where regular console device drivers may not work anymore, e.g. unrecoverable machine checks. Keep the early Service-Call Control Block so it can also be used after initdata has been freed to allow sclp_emergency_printk() implementation. - In case a system will be stopped because of an unrecoverable machine check error print the machine check interruption code to give a hint of what went wrong. - Move storage error checking from the assembly entry code to C in order to simplify machine check handling. Enter the handler with DAT turned on, which simplifies the entry code even more. - The machine check extended save areas are allocated using a private "nmi_save_areas" slab cache which guarantees a required power-of-two alignment. Get rid of that cache in favour of kmalloc(). -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY5ckrhccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8NlrAQD8NCLeEAkhGCRnzdTyngExCrzV Mw//cEnksUkIPqalJgEArbyFjGh05ecNaiDQduH8Gh94/qOhGE4obMdTgMWq7QY= =3aou -----END PGP SIGNATURE----- Merge tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Factor out handle_write() function and simplify 3215 console write operation - When 3170 terminal emulator is connected to the 3215 console driver the boot time could be very long due to limited buffer space or missing operator input. Add con3215_drop command line parameter and con3215_drop sysfs attribute file to instruct the kernel drop console data when such conditions are met - Fix white space errors in 3215 console driver - Move enum paiext_mode definition to a header file and rename it to paievt_mode to indicate this is now used for several events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with PAI_MODE_SAMPLING - Simplify the logic of PMU pai_crypto mapped buffer reference counter and make it consistent with PMU pai_ext - Rename PMU pai_crypto mapped buffer structure member users to active_events to make it consistent with PMU pai_ext - Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per 2G hugetlb page (~1.6%) - Use generic serial.h, bugs.h, shmparam.h and vga.h header files and scrap s390-specific versions - The generic percpu setup code does not expect the s390-like implementation and emits a warning. To get rid of that warning and provide sane CPU-to-node and CPU-to-CPU distance mappings implementat a minimal version of setup_per_cpu_areas() - Use kstrtobool() instead of strtobool() for re-IPL sysfs device attributes - Avoid unnecessary lookup of a pointer to MSI descriptor when setting IRQ affinity for a PCI device - Get rid of "an incompatible function type cast" warning by changing debug_sprintf_format_fn() function prototype so it matches the debug_format_proc_t function type - Remove unused info_blk_hdr__pcpus() and get_page_state() functions - Get rid of clang "unused unused insn cache ops function" warning by moving s390_insn definition to a private header - Get rid of clang "unused function" warning by making function raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is enabled - Use kstrobool() to parse sclp_con_drop parameter to make it identical to the con3215_drop parameter and allow passing values like "yes" and "true" - Use sysfs_emit() for all SCLP sysfs show functions, which is the current standard way to generate output strings - Make SCLP con_drop sysfs attribute also writable and allow to change its value during runtime. This makes SCLP console drop handling consistent with the 3215 device driver - Virtual and physical addresses are indentical on s390. However, there is still a confusion when pointers are directly casted to physical addresses or vice versa. Use correct address converters virt_to_phys() and phys_to_virt() for s390 channel IO drivers - Support for power managemant has been removed from s390 since quite some time. Remove unused power managemant code from the appldata device driver - Allow memory tools like KASAN see memory accesses from the checksum code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does - Add support of ECKD DASDs disks so it could be used as boot and dump devices - Follow checkpatch recommendations and use octal values instead of S_IRUGO and S_IWUSR for dump device attributes in sysfs - Changes to vx-insn.h do not cause a recompile of C files that use asm(".include \"asm/vx-insn.h\"\n") magic to access vector instruction macros from inline assemblies. Add wrapper include header file to avoid this problem - Use vector instruction macros instead of byte patterns to increase register validation routine readability - The current machine check register validation handling does not take into account various scenarios and might lead to killing a wrong user process or potentially ignore corrupted FPU registers. Simplify logic of the machine check handler and stop the whole machine if the previous context was kerenel mode. If the previous context was user mode, kill the current task - Introduce sclp_emergency_printk() function which can be used to emit a message in emergency cases. It is supposed to be used in cases where regular console device drivers may not work anymore, e.g. unrecoverable machine checks Keep the early Service-Call Control Block so it can also be used after initdata has been freed to allow sclp_emergency_printk() implementation - In case a system will be stopped because of an unrecoverable machine check error print the machine check interruption code to give a hint of what went wrong - Move storage error checking from the assembly entry code to C in order to simplify machine check handling. Enter the handler with DAT turned on, which simplifies the entry code even more - The machine check extended save areas are allocated using a private "nmi_save_areas" slab cache which guarantees a required power-of-two alignment. Get rid of that cache in favour of kmalloc() * tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (38 commits) s390/nmi: get rid of private slab cache s390/nmi: move storage error checking back to C, enter with DAT on s390/nmi: print machine check interruption code before stopping system s390/sclp: introduce sclp_emergency_printk() s390/sclp: keep sclp_early_sccb s390/nmi: rework register validation handling s390/nmi: use vector instruction macros instead of byte patterns s390/vx: add vx-insn.h wrapper include file s390/ipl: use octal values instead of S_* macros s390/ipl: add eckd dump support s390/ipl: add eckd support vfio/ccw: identify CCW data addresses as physical vfio/ccw: sort out physical vs virtual pointers usage s390/checksum: support GENERIC_CSUM, enable it for KASAN s390/appldata: remove power management callbacks s390/cio: sort out physical vs virtual pointers usage s390/sclp: allow to change sclp_console_drop during runtime s390/sclp: convert to use sysfs_emit() s390/sclp: use kstrobool() to parse sclp_con_drop parameter s390/3270: make raw3270_state_final() depend on CONFIG_TN3270_CONSOLE ...	2022-12-12 11:04:08 -08:00
Linus Torvalds	06cff4a58e	arm64 updates for 6.2 ... ACPI: * Enable FPDT support for boot-time profiling * Fix CPU PMU probing to work better with PREEMPT_RT * Update SMMUv3 MSI DeviceID parsing to latest IORT spec * APMT support for probing Arm CoreSight PMU devices CPU features: * Advertise new SVE instructions (v2.1) * Advertise range prefetch instruction * Advertise CSSC ("Common Short Sequence Compression") scalar instructions, adding things like min, max, abs, popcount * Enable DIT (Data Independent Timing) when running in the kernel * More conversion of system register fields over to the generated header CPU misfeatures: * Workaround for Cortex-A715 erratum #2645198 Dynamic SCS: * Support for dynamic shadow call stacks to allow switching at runtime between Clang's SCS implementation and the CPU's pointer authentication feature when it is supported (complete with scary DWARF parser!) Tracing and debug: * Remove static ftrace in favour of, err, dynamic ftrace! * Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace and existing arch code * Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the old FTRACE_WITH_REGS * Extend 'crashkernel=' parameter with default value and fallback to placement above 4G physical if initial (low) allocation fails SVE: * Optimisation to avoid disabling SVE unconditionally on syscall entry and just zeroing the non-shared state on return instead Exceptions: * Rework of undefined instruction handling to avoid serialisation on global lock (this includes emulation of user accesses to the ID registers) Perf and PMU: * Support for TLP filters in Hisilicon's PCIe PMU device * Support for the DDR PMU present in Amlogic Meson G12 SoCs * Support for the terribly-named "CoreSight PMU" architecture from Arm (and Nvidia's implementation of said architecture) Misc: * Tighten up our boot protocol for systems with memory above 52 bits physical * Const-ify static keys to satisty jump label asm constraints * Trivial FFA driver cleanups in preparation for v1.1 support * Export the kernel_neon_* APIs as GPL symbols * Harden our instruction generation routines against instrumentation * A bunch of robustness improvements to our arch-specific selftests * Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...) -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1 =hV+2 -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The highlights this time are support for dynamically enabling and disabling Clang's Shadow Call Stack at boot and a long-awaited optimisation to the way in which we handle the SVE register state on system call entry to avoid taking unnecessary traps from userspace. Summary: ACPI: - Enable FPDT support for boot-time profiling - Fix CPU PMU probing to work better with PREEMPT_RT - Update SMMUv3 MSI DeviceID parsing to latest IORT spec - APMT support for probing Arm CoreSight PMU devices CPU features: - Advertise new SVE instructions (v2.1) - Advertise range prefetch instruction - Advertise CSSC ("Common Short Sequence Compression") scalar instructions, adding things like min, max, abs, popcount - Enable DIT (Data Independent Timing) when running in the kernel - More conversion of system register fields over to the generated header CPU misfeatures: - Workaround for Cortex-A715 erratum #2645198 Dynamic SCS: - Support for dynamic shadow call stacks to allow switching at runtime between Clang's SCS implementation and the CPU's pointer authentication feature when it is supported (complete with scary DWARF parser!) Tracing and debug: - Remove static ftrace in favour of, err, dynamic ftrace! - Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace and existing arch code - Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the old FTRACE_WITH_REGS - Extend 'crashkernel=' parameter with default value and fallback to placement above 4G physical if initial (low) allocation fails SVE: - Optimisation to avoid disabling SVE unconditionally on syscall entry and just zeroing the non-shared state on return instead Exceptions: - Rework of undefined instruction handling to avoid serialisation on global lock (this includes emulation of user accesses to the ID registers) Perf and PMU: - Support for TLP filters in Hisilicon's PCIe PMU device - Support for the DDR PMU present in Amlogic Meson G12 SoCs - Support for the terribly-named "CoreSight PMU" architecture from Arm (and Nvidia's implementation of said architecture) Misc: - Tighten up our boot protocol for systems with memory above 52 bits physical - Const-ify static keys to satisty jump label asm constraints - Trivial FFA driver cleanups in preparation for v1.1 support - Export the kernel_neon_* APIs as GPL symbols - Harden our instruction generation routines against instrumentation - A bunch of robustness improvements to our arch-specific selftests - Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits) arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler arm64: Prohibit instrumentation on arch_stack_walk() arm64:uprobe fix the uprobe SWBP_INSN in big-endian arm64: alternatives: add __init/__initconst to some functions/variables arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init() kselftest/arm64: Allow epoll_wait() to return more than one result kselftest/arm64: Don't drain output while spawning children kselftest/arm64: Hold fp-stress children until they're all spawned arm64/sysreg: Remove duplicate definitions from asm/sysreg.h arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation arm64/sysreg: Convert MVFR2_EL1 to automatic generation arm64/sysreg: Convert MVFR1_EL1 to automatic generation arm64/sysreg: Convert MVFR0_EL1 to automatic generation arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation ...	2022-12-12 09:50:05 -08:00
Joerg Roedel	e3eca2e4f6	Merge branches 'arm/allwinner', 'arm/exynos', 'arm/mediatek', 'arm/rockchip', 'arm/smmu', 'ppc/pamu', 's390', 'x86/vt-d', 'x86/amd' and 'core' into next	2022-12-12 12:50:53 +01:00
Nicholas Piggin	6b34a099fa	powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults ... This option increases the number of hash misses by limiting the number of kernel HPT entries, by keeping a per-CPU record of the last kernel HPTEs installed, and removing that from the hash table on the next hash insertion. A timer round-robins CPUs removing remaining kernel HPTEs and clearing the TLB (in the case of bare metal) to increase and slightly randomise kernel fault activity. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Add comment about NR_CPUS usage, fixup whitespace] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221024030150.852517-1-npiggin@gmail.com	2022-12-02 18:04:25 +11:00
Steven Rostedt (Google)	a01fdc897f	tracing: Add trace_trigger kernel command line option ... Allow triggers to be enabled at kernel boot up. For example: trace_trigger="sched_switch.stacktrace if prev_state == 2" The above will enable the stacktrace trigger on top of the sched_switch event and only trigger if its prev_state is 2 (TASK_UNINTERRUPTIBLE). Then at boot up, a stacktrace will trigger and be recorded in the tracing ring buffer every time the sched_switch happens where the previous state is TASK_INTERRUPTIBLE. Another useful trigger would be "traceoff" which can stop tracing on an event if a field of the event matches a certain value defined by the filter ("if" statement). Link: https://lore.kernel.org/linux-trace-kernel/20221020210056.0d8d0a5b@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2022-11-23 19:08:30 -05:00
Perry Yuan	1056d31470	Documentation: add amd-pstate kernel command line options ... Add a new amd pstate driver command line option to enable driver passive working mode via MSR and shared memory interface to request desired performance within abstract scale and the power management firmware (SMU) convert the perf requests into actual hardware pstates. Also the `disable` parameter can disable the pstate driver loading by adding `amd_pstate=disable` to kernel command line. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2022-11-22 19:57:15 +01:00
Kim Phillips	1198d2316d	iommu/amd: Fix ill-formed ivrs_ioapic, ivrs_hpet and ivrs_acpihid options ... Currently, these options cause the following libkmod error: libkmod: ERROR ../libkmod/libkmod-config.c:489 kcmdline_parse_result: \ Ignoring bad option on kernel command line while parsing module \ name: 'ivrs_xxxx[XX:XX' Fix by introducing a new parameter format for these options and throw a warning for the deprecated format. Users are still allowed to omit the PCI Segment if zero. Adding a Link: to the reason why we're modding the syntax parsing in the driver and not in libkmod. Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-modules/20200310082308.14318-2-lucas.demarchi@intel.com/ Reported-by: Kim Phillips <kim.phillips@amd.com> Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20220919155638.391481-2-kim.phillips@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>	2022-11-19 10:05:28 +01:00
Zhen Lei	a9ae89df73	arm64: kdump: Support crashkernel=X fall back to reserve region above DMA zones ... For crashkernel=X without '@offset', select a region within DMA zones first, and fall back to reserve region above DMA zones. This allows users to use the same configuration on multiple platforms. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20221116121044.1690-3-thunder.leizhen@huawei.com Signed-off-by: Will Deacon <will@kernel.org>	2022-11-18 14:14:35 +00:00
Zhen Lei	a149cf00b1	arm64: kdump: Provide default size when crashkernel=Y,low is not specified ... Try to allocate at least 128 MiB low memory automatically for the case that crashkernel=,high is explicitly specified, while crashkenrel=,low is omitted. This allows users to focus more on the high memory requirements of their business rather than the low memory requirements of the crash kernel booting. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20221116121044.1690-2-thunder.leizhen@huawei.com Signed-off-by: Will Deacon <will@kernel.org>	2022-11-18 14:14:35 +00:00
Jason A. Donenfeld	b9b01a5625	random: use random.trust_{bootloader,cpu} command line option only ... It's very unusual to have both a command line option and a compile time option, and apparently that's confusing to people. Also, basically everybody enables the compile time option now, which means people who want to disable this wind up having to use the command line option to ensure that anyway. So just reduce the number of moving pieces and nix the compile time option in favor of the more versatile command line option. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>	2022-11-18 02:18:10 +01:00
Thomas Zimmermann	9a758d8756	drm: Move nomodeset kernel parameter to drivers/video ... Move the nomodeset kernel parameter to drivers/video to make it available to non-DRM drivers. Adapt the interface, but keep the DRM interface drm_firmware_drivers_only() to avoid churn within DRM. The function should later be inlined into callers. The parameter disables any DRM graphics driver that would replace a driver for firmware-provided scanout buffers. It is an option to easily fallback to basic graphics output if the hardware's native driver is broken. Moving it to a more prominent location wil make it available to fbdev as well. v2: * clarify the meaning of the nomodeset parameter (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de	2022-11-16 13:26:12 +01:00
Thomas Richter	1f3307cf3a	s390/con3215: Drop console data printout when buffer full ... Using z/VM the 3270 terminal emulator also emulates an IBM 3215 console which outputs line by line. When the screen is full, the console enters the MORE... state and waits for the operator to confirm the data on the screen by pressing a clear key. If this does not happen in the default time frame (currently 50 seconds) the console enters the HOLDING state. It then waits another time frame (currently 10 seconds) before the output continues on the next screen. When the operator presses the clear key during these wait times, the output continues immediately. This may lead to a very long boot time when the console has to print many messages, also the system may hang because of the console's limited buffer space and the system waits for the console output to drain and finally to finish. This problem can only occur when a terminal emulator is actually connected to the 3215 console driver. If not z/VM simply drops console output. Remedy this rare situation and add a kernel boot command line parameter con3215_drop. It can be set to 0 (do not drop) or 1 (do drop) which is the default. This instructs the kernel drop console data when the console buffer is full. This speeds up the boot time considerable and also does not hang the system anymore. Add a sysfs attribute file for console IBM 3215 named con_drop. This allows for changing the behavior after the boot, for example when during interactive debugging a panic/crash is expected. Here is a test of the new behavior using the following test program: #/bin/bash declare -i cnt=4 mode=$(cat /sys/bus/ccw/drivers/3215/con_drop) [ $mode = yes ] && cnt=25 echo "cons_drop $(cat /sys/bus/ccw/drivers/3215/con_drop)" echo "vmcp term more 5 2" vmcp term more 5 2 echo "Run $cnt iterations of "'echo t > /proc/sysrq-trigger' for i in $(seq $cnt) do echo "$i. command 'echo t > /proc/sysrq-trigger' at $(date +%F,%T)" echo t > /proc/sysrq-trigger sleep 1 done echo "droptest done" > /dev/kmsg # Output with sysfs attribute con_drop set to 1: # ./droptest.sh cons_drop yes vmcp term more 5 2 Run 25 iterations of echo t > /proc/sysrq-trigger 1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:09 2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:10 3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:11 4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:12 5. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:13 6. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:14 7. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:15 8. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:16 9. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:17 10. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:18 11. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:19 12. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:20 13. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:21 14. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:22 15. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:23 16. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:24 17. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:25 18. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:26 19. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:27 20. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:28 21. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:29 22. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:30 23. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:31 24. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:32 25. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:33 # There are no hangs anymore. Output with sysfs attribute con_drop set to 0 and identical setting for z/VM console 'term more 5 2'. Sometimes hitting the clear key at the x3270 console to progress output. # ./droptest.sh cons_drop no vmcp term more 5 2 Run 4 iterations of echo t > /proc/sysrq-trigger 1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:20:58 2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:24:32 3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:28:04 4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:31:37 # Details: Enable function raw3215_write() to handle tab expansion and newlines and feed it with input not larger than the console buffer of 65536 bytes. Function raw3125_putchar() just forwards its character for output to raw3215_write(). This moves tab to blank conversion to one function raw3215_write() which also does call raw3215_make_room() to wait for enough free buffer space. Function handle_write() loops over all its input and segments input into chunks of console buffer size (should the input be larger). Rework tab expansion handling logic to avoid code duplication. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>	2022-10-26 14:46:51 +02:00
Linus Torvalds	778ce723e9	xen: branch for v6.1-rc1 ... -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY0ZjFAAKCRCAXGG7T9hj vjEsAP4rFMnqc6AXy4Mpvv8cxBtEuQZbwEqgBrMJUvK1jZQrBQD/dOJK2GBCVcfD 2yaVlefFiJGTw5WUlbPeohUlTZ8pJwg= =xsHV -----END PGP SIGNATURE----- Merge tag 'for-linus-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - Some minor typo fixes - A fix of the Xen pcifront driver for supporting the device model to run in a Linux stub domain - A cleanup of the pcifront driver - A series to enable grant-based virtio with Xen on x86 - A cleanup of Xen PV guests to distinguish between safe and faulting MSR accesses - Two fixes of the Xen gntdev driver - Two fixes of the new xen grant DMA driver * tag 'for-linus-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum" xen/pv: support selecting safe/unsafe msr accesses xen/pv: refactor msr access functions to support safe and unsafe accesses xen/pv: fix vendor checks for pmu emulation xen/pv: add fault recovery control to pmu msr accesses xen/virtio: enable grant based virtio on x86 xen/virtio: use dom0 as default backend for CONFIG_XEN_VIRTIO_FORCE_GRANT xen/virtio: restructure xen grant dma setup xen/pcifront: move xenstore config scanning into sub-function xen/gntdev: Accommodate VMA splitting xen/gntdev: Prevent leaking grants xen/virtio: Fix potential deadlock when accessing xen_grant_dma_devices xen/virtio: Fix n_pages calculation in xen_grant_dma_map(unmap)_page() xen/xenbus: Fix spelling mistake "hardward" -> "hardware" xen-pcifront: Handle missed Connected state	2022-10-12 14:39:38 -07:00
Juergen Gross	3fac3734c4	xen/pv: support selecting safe/unsafe msr accesses ... Instead of always doing the safe variants for reading and writing MSRs in Xen PV guests, make the behavior controllable via Kconfig option and a boot parameter. The default will be the current behavior, which is to always use the safe variant. Signed-off-by: Juergen Gross <jgross@suse.com>	2022-10-11 10:51:05 +02:00
Linus Torvalds	27bc50fc90	- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in ... linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam R. Howlett. An overlapping range-based tree for vmas. It it apparently slight more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com). This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU= =xfWx -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...	2022-10-10 17:53:04 -07:00
Linus Torvalds	f23cdfcd04	IOMMU Updates for Linux v6.1: ... Including: - Removal of the bus_set_iommu() interface which became unnecesary because of IOMMU per-device probing - Make the dma-iommu.h header private - Intel VT-d changes from Lu Baolu: - Decouple PASID and PRI from SVA - Add ESRTPS & ESIRTPS capability check - Cleanups - Apple DART support for the M1 Pro/MAX SOCs - Support for AMD IOMMUv2 page-tables for the DMA-API layer. The v2 page-tables are compatible with the x86 CPU page-tables. Using them for DMA-API prepares support for hardware-assisted IOMMU virtualization - Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver - Some smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmNEC5oACgkQK/BELZcB GuNcOQ/6A5SXmcvDRLYZW1ENM5Z6xsZ1LabSZkjhYSpmbJyu8Uny/Z2aRWqxPMLJ hJeHTsWSLhrTq1VfjFhELHB3kgT2DRr7H3LXXaMNC6qz690EcavX1wKX2AxH0m22 8YrktkyAmFQ3BG6rsQLdlMMasLph/x06ix/xO9opQZVFdj/fV0Jx7ekX1JK+U3hx MI96i5W3G5PBVHBypAvjxSlmA4saj9Fhk7l3IZL7py9AOKz7NypuwWRs+86PMBiO EzLt5aF4g8pmKChF/c9BsoIbjBYvTG/s3NbycIng0ACc2SOvf+EvtoVZQclWifbT lwti9PLdsoVUnPOZHLYOTx4xSf/UyoLVzaLxJ52aoXnNYe2qaX5DANXhT2mWIY/Y z1mzOkShmK7WF7a8arRyqJeLJ4SvDx8GrbvLiom3DAzmqVHzzFGadHtt5fvGYN4F Jet/JIN3HjECQbamqtPBpWquBFhLmgusPksIiyMFscRvYdZqkaVkTkElcF3WqAMm QkeecfoTQ9Vdtdz44ZVLRjKpS77yRZmHshp1r/rfSI+9Ok8uRI+xmmcyrAI6ElqH DH14tLHPzw694rTHF+bTCd+pPMGOoFLi0xAfUXAeGWm1uzC1JIRrVu5JeQNOUOSD 5SQDXB7dPrhXngaws5Fx2u3amCO3688mslcGgM7q54kC+LyVo0E= =h0sT -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - remove the bus_set_iommu() interface which became unnecesary because of IOMMU per-device probing - make the dma-iommu.h header private - Intel VT-d changes from Lu Baolu: - Decouple PASID and PRI from SVA - Add ESRTPS & ESIRTPS capability check - Cleanups - Apple DART support for the M1 Pro/MAX SOCs - support for AMD IOMMUv2 page-tables for the DMA-API layer. The v2 page-tables are compatible with the x86 CPU page-tables. Using them for DMA-API prepares support for hardware-assisted IOMMU virtualization - support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver - some smaller fixes and cleanups * tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits) iommu/vt-d: Avoid unnecessary global DMA cache invalidation iommu/vt-d: Avoid unnecessary global IRTE cache invalidation iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support iommu/vt-d: Remove pasid_set_eafe() iommu/vt-d: Decouple PASID & PRI enabling from SVA iommu/vt-d: Remove unnecessary SVA data accesses in page fault path dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names iommu: dart: Support t6000 variant iommu/io-pgtable-dart: Add DART PTE support for t6000 iommu/io-pgtable: Add DART subpage protection support iommu/io-pgtable: Move Apple DART support to its own file iommu/mediatek: Add support for MT6795 Helio X10 M4Us iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173 dt-bindings: mediatek: Add bindings for MT6795 M4U iommu/iova: Fix module config properly iommu/amd: Fix sparse warning iommu/amd: Remove outdated comment iommu/amd: Free domain ID after domain_flush_pages iommu/amd: Free domain id in error path iommu/virtio: Fix compile error with viommu_capable() ...	2022-10-10 13:20:53 -07:00
Linus Torvalds	4899a36f91	powerpc updates for 6.1 ... - Remove our now never-true definitions for pgd_huge() and p4d_leaf(). - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit. - Add support for syscall wrappers. - Add support for KFENCE on 64-bit. - Update 64-bit HV KVM to use the new guest state entry/exit accounting API. - Support execute-only memory when using the Radix MMU (P9 or later). - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests. - Updates to our linker script to move more data into read-only sections. - Allow the VDSO to be randomised on 32-bit. - Many other small features and fixes. Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, Zheng Yongjun. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmNCpBMTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDx3EACCf86iumFF3RyvENtDwoTRgH3H0z2E /ZC4LKrtxgaPFJzKUT4F0kLK85Hw5GzMEKK42NIhAB0o5vFwmEzxOtnlHOyEufAm EDIZDIfxV2J9Qx/cW2DSojPj/o9O6noXwhw9SBqMwiDWd8gXmNgOUEklAO7aR7Vq Ne2N2FLMNthZydCoHR6dAEjfe2ceFXP5cALwzQO+ILDdZQ0UcF2Yq4yw/gEDoCrB FH7mmE7UaQQHvYzo85VTZu7XfUys1P7kUcnhVurOg7/07ITnvnQR+itKZXC+bSft 1K7ULtjd2QiCgxZA/apFc3lO46kqHVFsB3onRQw12/Ku5vfGFfY0L0iK97OgM4s0 0u4r+J7A+MM5YBJVVjwZ6woYO5CWMHYKBZepxOpcvftPxj1LNkiHsryqKILGISEC aIY/lI0hpeNU4QshDMXzSTgeb/VF9O5cGPncTPkOFbXxD4RpVyz8tSngsG1+D8lj S6B2h3k4A14rnblLOxP22jcedBlTYQcRQS4vwr0a7+63QTjfSJ12xT3ucIAKU9f7 65rVSS/igbrfxqHDmrd60WWZBMXeK0Zy7YIG6iYPTxpP31eFpSp9wtDlV7V2+EH2 F2p+TJY8aTA8UW+2L5gigN3RsBeeEB8zxJkB14ivICM7+XzVu11PxPDqjDZYkfzC ueKKvCcHhHAYqQ== =TFBA -----END PGP SIGNATURE----- Merge tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Remove our now never-true definitions for pgd_huge() and p4d_leaf(). - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit. - Add support for syscall wrappers. - Add support for KFENCE on 64-bit. - Update 64-bit HV KVM to use the new guest state entry/exit accounting API. - Support execute-only memory when using the Radix MMU (P9 or later). - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests. - Updates to our linker script to move more data into read-only sections. - Allow the VDSO to be randomised on 32-bit. - Many other small features and fixes. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng Yongjun. * tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) KVM: PPC: Book3S HV: Fix stack frame regs marker powerpc: Don't add __powerpc_ prefix to syscall entry points powerpc/64s/interrupt: Fix stack frame regs marker powerpc/64: Fix msr_check_and_set/clear MSR[EE] race powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN powerpc/pseries: Add firmware details to the hardware description powerpc/powernv: Add opal details to the hardware description powerpc: Add device-tree model to the hardware description powerpc/64: Add logical PVR to the hardware description powerpc: Add PVR & CPU name to hardware description powerpc: Add hardware description string powerpc/configs: Enable PPC_UV in powernv_defconfig powerpc/configs: Update config files for removed/renamed symbols powerpc/mm: Fix UBSAN warning reported on hugetlb powerpc/mm: Always update max/min_low_pfn in mem_topology_setup() powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range powerpc: Drops STABS_DEBUG from linker scripts powerpc/64s: Remove lost/old comment powerpc/64s: Remove old STAB comment powerpc: remove orphan systbl_chk.sh ...	2022-10-09 14:05:15 -07:00
Linus Torvalds	ffb39098bf	linux-kselftest-kunit-6.1-rc1 ... This KUnit update for Linux 6.1-rc1 consists of several documentation fixes, UML related cleanups, and a feature to enable/disable KUnit tests. This update includes the following change to - rename all_test_uml.config, use it for --alltests Note: if anyone was using all_tests_uml.config, this change breaks them. This change simplifies the usage and eliminates the need to type: --kunitconfig=tools/testing/kunit/configs/all_tests_uml.config. A simple workaround to create a symlink to the new name can solve the problem for anyone using all_tests_uml.config. all_tests_uml.config should work across ~all architectures. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmM97okACgkQCwJExA0N Qxwe9BAA4rUh/CdaDpGxSoknamlSlXbcsxyHQK32OoqtIQPJfPcqxZwZhqGzpZAE z7qqnfN7dGWACcJjaZYZtkjJ1tsJ7OADf6m81drM6lmHSDRldAhdXMK9qqJAA2pk OMciu7TcoSezaMw3eKZZ8jeQ2OIEUirQQXFIuMkb9r+E65tyIGCVo9njY19is6bk 7TcrUNlzgTednzkJ7B5BY54vZjvET/kwwBhXUgygMoi0JkKIoksJcxF2y7x1UKUx Kfu/3bqiBAAEiOdMLxnxqwNH/Uhny1IWV6w+p0gtEsVGS47QvRew7gtIuKgCZWpf S/w7QL+zCaXGB3jM8KVk7p4L9qU6EIttqu7kwXSs5OZz8QVrw6oc1l0RDUI5NIWi TLRO4QJHWssKNrSyldtk2J9wFEHOF48Hc6HYqHxJLFYwfutt5hzsKotN6+H60Uth TVAE+oUWknQks1Imv7x3Avq5k6CyfH9dFqqH+IrM2hDbqkZN1hfHvm1RJgcXFaHf f4UpAYwCgkb3Maa7mTBq2/x98UUhh051EQuHDUO6H0tzccxJUbwkeeGK+WH51aZu d6RD4ZnH4BlB+EMbfXgkXdsGqcsQMneoLh5/V0y1L8aSyjJQ8FYlK5lQYwu9VBXQ 6g6AH4nlhvVplXgCDeGnnTa7HfTD87Vx9Dws+uO+J/QbwqTatI4= =Q5W1 -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "Several documentation fixes, UML related cleanups, and a feature to enable/disable KUnit tests This includes the change to rename all_test_uml.config, and use it for '--alltests'. Note: if anyone was using all_tests_uml.config, this change breaks them. This change simplifies the usage and eliminates the need to type: --kunitconfig=tools/testing/kunit/configs/all_tests_uml.config A simple workaround to create a symlink to the new name can solve the problem for anyone using all_tests_uml.config. all_tests_uml.config should work across ~all architectures" * tag 'linux-kselftest-kunit-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: Kunit: Use full path to .kunitconfig kunit: tool: rename all_test_uml.config, use it for --alltests kunit: tool: remove UML specific options from all_tests_uml.config lib: stackinit: update reference to kunit-tool lib: overflow: update reference to kunit-tool Documentation: KUnit: update links in the index page Documentation: KUnit: add intro to the getting-started page Documentation: KUnit: Reword start guide for selecting tests Documentation: KUnit: add note about mrproper in start.rst Documentation: KUnit: avoid repeating "kunit.py run" in start.rst Documentation: KUnit: remove duplicated docs for kunit_tool Documentation: Kunit: Add ref for other kinds of tests Documentation: KUnit: Fix non-uml anchor Documentation: Kunit: Fix inconsistent titles Documentation: kunit: fix trivial typo kunit: no longer call module_info(test, "Y") for kunit modules kunit: add kunit.enable to enable/disable KUnit test kunit: tool: make --raw_output=kunit (aka --raw_output) preserve leading spaces	2022-10-06 12:57:55 -07:00
Linus Torvalds	18fd049731	arm64 updates for 6.1: ... - arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE vector granule register added to the user regs together with SVE perf extensions documentation. - SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation to match the actual kernel behaviour (zeroing the registers on syscall rather than "zeroed or preserved" previously). - More conversions to automatic system registers generation. - vDSO: use self-synchronising virtual counter access in gettimeofday() if the architecture supports it. - arm64 stacktrace cleanups and improvements. - arm64 atomics improvements: always inline assembly, remove LL/SC trampolines. - Improve the reporting of EL1 exceptions: rework BTI and FPAC exception handling, better EL1 undefs reporting. - Cortex-A510 erratum 2658417: remove BF16 support due to incorrect result. - arm64 defconfig updates: build CoreSight as a module, enable options necessary for docker, memory hotplug/hotremove, enable all PMUs provided by Arm. - arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME extensions). - arm64 ftraces updates/fixes: fix module PLTs with mcount, remove unused function. - kselftest updates for arm64: simple HWCAP validation, FP stress test improvements, validation of ZA regs in signal handlers, include larger SVE and SME vector lengths in signal tests, various cleanups. - arm64 alternatives (code patching) improvements to robustness and consistency: replace cpucap static branches with equivalent alternatives, associate callback alternatives with a cpucap. - Miscellaneous updates: optimise kprobe performance of patching single-step slots, simplify uaccess_mask_ptr(), move MTE registers initialisation to C, support huge vmalloc() mappings, run softirqs on the per-CPU IRQ stack, compat (arm32) misalignment fixups for multiword accesses. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmM9W4cACgkQa9axLQDI XvEy3w/+LJ3KCFowWiz5gTAWikjv+UVssHjLMJixn47V7hsEFQ26Xnam/438rTMI kE95u6DHUpw2SMIxKzFRO7oI5cQtP+cWGwTtOUnjVO+U1oN+HqDOIbO9DbylWDcU eeeqMMmawMfTPuZrYklpOhXscsorbrKIvYBg7wHYOcwBYV3EPhWr89lwMvTVRuyJ qpX628KlkGMaBcONNhv3nS3qZcAOs0oHQCAVS4C8czLDL+vtJlumXUS3xr1Mqm72 xtFe7sje8Djr2kZ8mzh0GbFiZEBoBD3F/l7ayq8gVRaVpToUt8sk36Stjs4LojF1 6imuAfji/5TItkScq5KhGqj6MIugwp/eUVbRN74OLNTYx7msF1ZADNFQ+Q0UuY0H SYK13KvmOji0xjS8qAfhqrwNB79sk3fb+zF9LjETbdz4ZJCgg9gcFbSUTY0DvMfS MXZk/jVeB07olA8xYbjh0BRt4UV9xU628FPQzK5k7e4Nzl4jSvgtJZCZanfuVtjy /ZS1vbN8o7tQLBAlVnw+Exi/VedkKxkkMgm8tPKsMgERTFDx0Pc4Gs72hRpDnPWT MRbeCCGleAf3JQ5vF0coBDNOCEVvweQgShHOyHTz0GyhWXLCFx3RJICo5I4EIpps LLUk4JK0fO3LVrf1AEpu5ZP4+Sact0zfsH3gB7qyLPYFDmjDXD8= =jl3Z -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE vector granule register added to the user regs together with SVE perf extensions documentation. - SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation to match the actual kernel behaviour (zeroing the registers on syscall rather than "zeroed or preserved" previously). - More conversions to automatic system registers generation. - vDSO: use self-synchronising virtual counter access in gettimeofday() if the architecture supports it. - arm64 stacktrace cleanups and improvements. - arm64 atomics improvements: always inline assembly, remove LL/SC trampolines. - Improve the reporting of EL1 exceptions: rework BTI and FPAC exception handling, better EL1 undefs reporting. - Cortex-A510 erratum 2658417: remove BF16 support due to incorrect result. - arm64 defconfig updates: build CoreSight as a module, enable options necessary for docker, memory hotplug/hotremove, enable all PMUs provided by Arm. - arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME extensions). - arm64 ftraces updates/fixes: fix module PLTs with mcount, remove unused function. - kselftest updates for arm64: simple HWCAP validation, FP stress test improvements, validation of ZA regs in signal handlers, include larger SVE and SME vector lengths in signal tests, various cleanups. - arm64 alternatives (code patching) improvements to robustness and consistency: replace cpucap static branches with equivalent alternatives, associate callback alternatives with a cpucap. - Miscellaneous updates: optimise kprobe performance of patching single-step slots, simplify uaccess_mask_ptr(), move MTE registers initialisation to C, support huge vmalloc() mappings, run softirqs on the per-CPU IRQ stack, compat (arm32) misalignment fixups for multiword accesses. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits) arm64: alternatives: Use vdso/bits.h instead of linux/bits.h arm64/kprobe: Optimize the performance of patching single-step slot arm64: defconfig: Add Coresight as module kselftest/arm64: Handle EINTR while reading data from children kselftest/arm64: Flag fp-stress as exiting when we begin finishing up kselftest/arm64: Don't repeat termination handler for fp-stress ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs arm64/mm: fold check for KFENCE into can_set_direct_map() arm64: ftrace: fix module PLTs with mcount arm64: module: Remove unused plt_entry_is_initialized() arm64: module: Make plt_equals_entry() static arm64: fix the build with binutils 2.27 kselftest/arm64: Don't enable v8.5 for MTE selftest builds arm64: uaccess: simplify uaccess_mask_ptr() arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header kselftest/arm64: Fix typo in hwcap check arm64: mte: move register initialization to C arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate() arm64: dma: Drop cache invalidation from arch_dma_prep_coherent() arm64/sve: Add Perf extensions documentation ...	2022-10-06 11:51:49 -07:00
Linus Torvalds	0326074ff4	Networking changes for 6.1. ... Core ---- - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF --- - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols --------- - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API ---------- - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers ---------------------- - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers ------- - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmM7vtkACgkQMUZtbf5S Irvotg//dmh53rC+UMKO3OgOqPlSMnaqzbUdDEfN6mj4Mpox7Csb8zERVURHhBHY fvlXWsDgxmvgTebI5fvNC5+f1iW5xcqgJV2TWnNmDOKWwvQwb6qQfgixVmunvkpe IIukMXYt0dAf9bXeeEfbNXcCb85cPwB76stX0tMV6BX7osp3T0TL1fvFk0NJkL0j TeydLad/yAQtPb4TbeWYjNDoxPVDf0cVpUrevLGmWE88UMYmgTqPze+h1W5Wri52 bzjdLklY/4cgcIZClHQ6F9CeRWqEBxvujA5Hj/cwOcn/ptVVJWUGi7sQo3sYkoSs HFu+F8XsTec14kGNC0Ab40eVdqs5l/w8+E+4jvgXeKGOtVns8DwoiUIzqXpyty89 Ib04mffrwWNjFtHvo/kIsNwP05X2PGE9HUHfwsTUfisl/ASvMmQp7D7vUoqQC/4B AMVzT5qpjkmfBHYQQGuw8FxJhMeAOjC6aAo6censhXJyiUhIfleQsN0syHdaNb8q 9RZlhAgQoVb6ZgvBV8r8unQh/WtNZ3AopwifwVJld2unsE/UNfQy2KyqOWBES/zf LP9sfuX0JnmHn8s1BQEUMPU1jF9ZVZCft7nufJDL6JhlAL+bwZeEN4yCiAHOPZqE ymSLHI9s8yWZoNpuMWKrI9kFexVnQFKmA3+quAJUcYHNMSsLkL8= =Gsio -----END PGP SIGNATURE----- Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...	2022-10-04 13:38:03 -07:00
Johannes Weiner	b25806dcd3	mm: memcontrol: deprecate swapaccounting=0 mode ... The swapaccounting= commandline option already does very little today. To close a trivial containment failure case, the swap ownership tracking part of the swap controller has recently become mandatory (see commit 2d1c498072 ("mm: memcontrol: make swap tracking an integral part of memory control") for details), which makes up the majority of the work during swapout, swapin, and the swap slot map. The only thing left under this flag is the page_counter operations and the visibility of the swap control files in the first place, which are rather meager savings. There also aren't many scenarios, if any, where controlling the memory of a cgroup while allowing it unlimited access to a global swap space is a workable resource isolation strategy. On the other hand, there have been several bugs and confusion around the many possible swap controller states (cgroup1 vs cgroup2 behavior, memory accounting without swap accounting, memcg runtime disabled). This puts the maintenance overhead of retaining the toggle above its practical benefits. Deprecate it. Link: https://lkml.kernel.org/r/20220926135704.400818-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-10-03 14:03:36 -07:00
Joe Fradley	d20a6ba5e3	kunit: add kunit.enable to enable/disable KUnit test ... This patch adds the kunit.enable module parameter that will need to be set to true in addition to KUNIT being enabled for KUnit tests to run. The default value is true giving backwards compatibility. However, for the production+testing use case the new config option KUNIT_DEFAULT_ENABLED can be set to N requiring the tester to opt-in by passing kunit.enable=1 to the kernel. Signed-off-by: Joe Fradley <joefradley@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>	2022-09-30 13:17:39 -06:00
Christophe Leroy	404a5e72f4	Documentation: Rename PPC_FSL_BOOK3E to PPC_E500 ... CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Rename it so that CONFIG_PPC_FSL_BOOK3E can be removed later. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d3d42b395c09e66b0705fda1e51779f33e13ac38.1663606876.git.christophe.leroy@csgroup.eu	2022-09-26 23:00:13 +10:00
Kefeng Wang	e92072237e	arm64: support huge vmalloc mappings ... As commit 559089e0a9 ("vmalloc: replace VM_NO_HUGE_VMAP with VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an opt-in strategy, so it is saftly to support huge vmalloc mappings on arm64, for now, it is used in kvmalloc() and alloc_large_system_hash(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/r/20220911044423.139229-1-wangkefeng.wang@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>	2022-09-16 09:51:28 +01:00
Li Zhe	c4f20f1479	page_ext: introduce boot parameter 'early_page_ext' ... In commit 2f1ee0913c ("Revert "mm: use early_pfn_to_nid in page_ext_init""), we call page_ext_init() after page_alloc_init_late() to avoid some panic problem. It seems that we cannot track early page allocations in current kernel even if page structure has been initialized early. This patch introduces a new boot parameter 'early_page_ext' to resolve this problem. If we pass it to the kernel, page_ext_init() will be moved up and the feature 'deferred initialization of struct pages' will be disabled to initialize the page allocator early and prevent the panic problem above. It can help us to catch early page allocations. This is useful especially when we find that the free memory value is not the same right after different kernel booting. [akpm@linux-foundation.org: fix section issue by removing __meminitdata] Link: https://lkml.kernel.org/r/20220825102714.669-1-lizhe.67@bytedance.com Signed-off-by: Li Zhe <lizhe.67@bytedance.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-09-11 20:26:02 -07:00
Liu Song	877ace9eab	arm64: spectre: increase parameters that can be used to turn off bhb mitigation individually ... In our environment, it was found that the mitigation BHB has a great impact on the benchmark performance. For example, in the lmbench test, the "process fork && exit" test performance drops by 20%. So it is necessary to have the ability to turn off the mitigation individually through cmdline, thus avoiding having to compile the kernel by adjusting the config. Signed-off-by: Liu Song <liusong@linux.alibaba.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1661514050-22263-1-git-send-email-liusong@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>	2022-09-09 19:02:22 +01:00
Vasant Hegde	d799a183da	iommu/amd: Add command-line option to enable different page table ... Enhance amd_iommu command line option to specify v1 or v2 page table. By default system will boot in V1 page table mode. Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20220825063939.8360-10-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>	2022-09-07 16:12:37 +02:00
Nicholas Piggin	0e8a631328	powerpc/pseries: Implement CONFIG_PARAVIRT_TIME_ACCOUNTING ... CONFIG_VIRT_CPU_ACCOUNTING_GEN under pseries does not provide stolen time accounting unless CONFIG_PARAVIRT_TIME_ACCOUNTING is enabled. Implement this using the VPA accumulated wait counters. Note this will not work on current KVM hosts because KVM does not implement the VPA dispatch counters (yet). It could be implemented with the dispatch trace log as it is for VIRT_CPU_ACCOUNTING_NATIVE, but that is not necessary for the more limited accounting provided by PARAVIRT_TIME_ACCOUNTING, and it is more expensive, complex, and has downsides like potential log wrap. From Shrikanth: [...] it was tested on Power10 [PowerVM] Shared LPAR. system has two LPAR. we will call first one LPAR1 and second one as LPAR2. Test was carried out in SMT=1. Similar observation was seen in SMT=8 as well. LPAR config header from each LPAR is below. LPAR1 is twice as big as LPAR2. Since Both are sharing the same underlying hardware, work stealing will happen when both the LPAR's are contending for the same resource. LPAR1: type=Shared mode=Uncapped smt=Off lcpu=40 cpus=40 ent=20.00 LPAR2: type=Shared mode=Uncapped smt=Off lcpu=20 cpus=40 ent=10.00 mpstat was used to check for the utilization. stress-ng has been used as the workload. Few cases are tested. when the both LPAR are idle there is no steal time. when LPAR1 starts running at 100% which consumes all of the physical resource, steal time starts to get accounted. With LPAR1 running at 100% and LPAR2 starts running, steal time starts increasing. This is as expected. When the LPAR2 Load is increased further, steal time increases further. Case 1: 0% LPAR1; 0% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 0.00 0.00 0.05 0.00 0.00 0.00 0.00 0.00 0.00 99.95 Case 2: 100% LPAR1; 0% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 97.68 0.00 0.00 0.00 0.00 0.00 2.32 0.00 0.00 0.00 Case 3: 100% LPAR1; 50% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 86.34 0.00 0.10 0.00 0.00 0.03 13.54 0.00 0.00 0.00 Case 4: 100% LPAR1; 100% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 78.54 0.00 0.07 0.00 0.00 0.02 21.36 0.00 0.00 0.00 Case 5: 50% LPAR1; 100% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 49.37 0.00 0.00 0.00 0.00 0.00 1.17 0.00 0.00 49.47 Patch is accounting for the steal time and basic tests are holding good. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> [mpe: Add SPDX tag to new paravirt_api_clock.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902085316.2071519-3-npiggin@gmail.com	2022-09-05 14:14:02 +10:00
Jakub Kicinski	60ad1100d5	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net ... tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2022-09-01 12:58:02 -07:00
Daniel Sneddon	b8d1d16360	x86/apic: Don't disable x2APIC if locked ... The APIC supports two modes, legacy APIC (or xAPIC), and Extended APIC (or x2APIC). X2APIC mode is mostly compatible with legacy APIC, but it disables the memory-mapped APIC interface in favor of one that uses MSRs. The APIC mode is controlled by the EXT bit in the APIC MSR. The MMIO/xAPIC interface has some problems, most notably the APIC LEAK [1]. This bug allows an attacker to use the APIC MMIO interface to extract data from the SGX enclave. Introduce support for a new feature that will allow the BIOS to lock the APIC in x2APIC mode. If the APIC is locked in x2APIC mode and the kernel tries to disable the APIC or revert to legacy APIC mode a GP fault will occur. Introduce support for a new MSR (IA32_XAPIC_DISABLE_STATUS) and handle the new locked mode when the LEGACY_XAPIC_DISABLED bit is set by preventing the kernel from trying to disable the x2APIC. On platforms with the IA32_XAPIC_DISABLE_STATUS MSR, if SGX or TDX are enabled the LEGACY_XAPIC_DISABLED will be set by the BIOS. If legacy APIC is required, then it SGX and TDX need to be disabled in the BIOS. [1]: https://aepicleak.com/aepicleak.pdf Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Link: https://lkml.kernel.org/r/20220816231943.1152579-1-daniel.sneddon@linux.intel.com	2022-08-31 14:34:11 -07:00
Mark Rutland	2e8cff0a0e	arm64: fix rodata=full ... On arm64, "rodata=full" has been suppored (but not documented) since commit: c55191e96c ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") As it's necessary to determine the rodata configuration early during boot, arm64 has an early_param() handler for this, whereas init/main.c has a __setup() handler which is run later. Unfortunately, this split meant that since commit: f9a40b0890 ("init/main.c: return 1 from handled __setup() functions") ... passing "rodata=full" would result in a spurious warning from the __setup() handler (though RO permissions would be configured appropriately). Further, "rodata=full" has been broken since commit: 0d6ea3ac94 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") ... which caused strtobool() to parse "full" as false (in addition to many other values not documented for the "rodata=" kernel parameter. This patch fixes this breakage by: * Moving the core parameter parser to an __early_param(), such that it is available early. * Adding an (optional) arch hook which arm64 can use to parse "full". * Updating the documentation to mention that "full" is valid for arm64. * Having the core parameter parser handle "on" and "off" explicitly, such that any undocumented values (e.g. typos such as "ful") are reported as errors rather than being silently accepted. Note that __setup() and early_param() have opposite conventions for their return values, where __setup() uses 1 to indicate a parameter was handled and early_param() uses 0 to indicate a parameter was handled. Fixes: f9a40b0890 ("init/main.c: return 1 from handled __setup() functions") Fixes: 0d6ea3ac94 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jagdish Gediya <jvgediya@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>	2022-08-23 11:02:02 +01:00
Stephen Hemminger	1202cdd665	Remove DECnet support from kernel ... DECnet is an obsolete network protocol that receives more attention from kernel janitors than users. It belongs in computer protocol history museum not in Linux kernel. It has been "Orphaned" in kernel since 2010. The iproute2 support for DECnet was dropped in 5.0 release. The documentation link on Sourceforge says it is abandoned there as well. Leave the UAPI alone to keep userspace programs compiling. This means that there is still an empty neighbour table for AF_DECNET. The table of /proc/sys/net entries was updated to match current directories and reformatted to be alphabetical. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: David Ahern <dsahern@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>	2022-08-22 14:26:30 +01:00
Linus Torvalds	c5f1e32e32	Fix the "IBPB mitigated RETBleed" mode of operation on AMD CPUs ... (not turned on by default), which also need STIBP enabled (if available) to be '100% safe' on even the shortest speculation windows. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmL3fqcRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gnuw/6AighFp+Gp4qXP1DIVU+acVnZsxbdt7GA WGs/JJfKYsKpWvDGFxnwtF2V1Imq8XVRPVPyFKvLQiBs2h8vNcVkgIvJsdeTFsqQ uUwUaYgDXuhLYaFpnMGouoeA3iw2zf/CY5ZJX79Nl/CwNwT7FxiLbu+JF/I2Yc0V yddiQ8xgT0VJhaBcUTsD2qFl8wjpxer7gNBFR4ujiYWXHag3qKyZuaySmqCz4xhd 4nyhJCp34548MsTVXDys2gnYpgLWweB9zOPvH4+GgtiFF3UJxRMhkB9NzfZq1l5W tCjgGupb3vVoXOVb/xnXyZlPbdFNqSAja7iOXYdmNUSURd7LC0PYHpVxN0rkbFcd V6noyU3JCCp86ceGTC0u3Iu6LLER6RBGB0gatVlzomWLjTEiC806eo23CVE22cnk poy7FO3RWa+q1AqWsEzc3wr14ZgSKCBZwwpn6ispT/kjx9fhAFyKtH2/Sznx26GH yKOF7pPCIXjCpcMnNoUu8cVyzfk0g3kOWQtKjaL9WfeyMtBaHhctngR0s1eCxZNJ rBlTs+YO7fO42unZEExgvYekBzI70aThIkvxahKEWW48owWph+i/sn5gzdVF+ynR R4PGeylfd8ZXr21cG2rG9250JLwqzhsxnAGvNjYg1p/hdyrzLTGWHIc9r9BU9000 mmOP9uY6Cjc= =Ac6x -----END PGP SIGNATURE----- Merge tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not turned on by default), which also need STIBP enabled (if available) to be '100% safe' on even the shortest speculation windows" * tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Enable STIBP for IBPB mitigated RETBleed	2022-08-13 14:24:12 -07:00
Linus Torvalds	b1701d5e29	- hugetlb_vmemmap cleanups from Muchun Song ... - hardware poisoning support for 1GB hugepages, from Naoya Horiguchi - highmem documentation fixups from Fabio De Francesco -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYvMFaQAKCRDdBJ7gKXxA jrM7AQCsaVsrRJgVMNqjDvLAsWFEm48s6/smQT4UZ9n/rPQUsAEA0iRpOfbjcxwK npAml1mp5uP2AkimTVLB6Bokt6N+wAg= =9Wta -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull remaining MM updates from Andrew Morton: "Three patch series - two that perform cleanups and one feature: - hugetlb_vmemmap cleanups from Muchun Song - hardware poisoning support for 1GB hugepages, from Naoya Horiguchi - highmem documentation fixups from Fabio De Francesco" * tag 'mm-stable-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits) Documentation/mm: add details about kmap_local_page() and preemption highmem: delete a sentence from kmap_local_page() kdocs Documentation/mm: rrefer kmap_local_page() and avoid kmap() Documentation/mm: avoid invalid use of addresses from kmap_local_page() Documentation/mm: don't kmap*() pages which can't come from HIGHMEM highmem: specify that kmap_local_page() is callable from interrupts highmem: remove unneeded spaces in kmap_local_page() kdocs mm, hwpoison: enable memory error handling on 1GB hugepage mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage mm, hwpoison: make __page_handle_poison returns int mm, hwpoison: set PG_hwpoison for busy hugetlb pages mm, hwpoison: make unpoison aware of raw error info in hwpoisoned hugepage mm, hwpoison, hugetlb: support saving mechanism of raw error pages mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry mm/hugetlb: check gigantic_page_runtime_supported() in return_unused_surplus_pages() mm: hugetlb_vmemmap: use PTRS_PER_PTE instead of PMD_SIZE / PAGE_SIZE mm: hugetlb_vmemmap: move code comments to vmemmap_dedup.rst mm: hugetlb_vmemmap: improve hugetlb_vmemmap code readability mm: hugetlb_vmemmap: replace early_param() with core_param() mm: hugetlb_vmemmap: move vmemmap code related to HugeTLB to hugetlb_vmemmap.c ...	2022-08-10 11:18:00 -07:00
Muchun Song	dff033818a	mm: hugetlb_vmemmap: introduce the name HVO ... It it inconvenient to mention the feature of optimizing vmemmap pages associated with HugeTLB pages when communicating with others since there is no specific or abbreviated name for it when it is first introduced. Let us give it a name HVO (HugeTLB Vmemmap Optimization) from now. This commit also updates the document about "hugetlb_free_vmemmap" by the way discussed in thread [1]. Link: https://lore.kernel.org/all/21aae898-d54d-cc4b-a11f-1bb7fddcfffa@redhat.com/ [1] Link: https://lkml.kernel.org/r/20220628092235.91270-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-08-08 18:06:42 -07:00
Linus Torvalds	e74acdf55d	Modules updates for 6.0 ... For the 6.0 merge window the modules code shifts to cleanup and minor fixes effort. This is becomes much easier to do and review now due to the code split to its own directory from effort on the last kernel release. I expect to see more of this with time and as we expand on test coverage in the future. The cleanups and fixes come from usual suspects such as Christophe Leroy and Aaron Tomlin but there are also some other contributors. One particular minor fix worth mentioning is from Helge Deller, where he spotted a *forever* incorrect natural alignment on both ELF section header tables: * .altinstructions * __bug_table sections A lot of back and forth went on in trying to determine the ill effects of this misalignment being present for years and it has been determined there should be no real ill effects unless you have a buggy exception handler. Helge actually hit one of these buggy exception handlers on parisc which is how he ended up spotting this issue. When implemented correctly these paths with incorrect misalignment would just mean a performance penalty, but given that we are dealing with alternatives on modules and with the __bug_table (where info regardign BUG()/WARN() file/line information associated with it is stored) this really shouldn't be a big deal. The only other change with mentioning is the kmap() with kmap_local_page() and my only concern with that was on what is done after preemption, but the virtual addresses are restored after preemption. This is only used on module decompression. This all has sit on linux-next for a while except the kmap stuff which has been there for 3 weeks. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmLxL4gSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoin8AYP/iv/Oh/Zzh4UvZzkkOSzhf1qDgGhjFb0 aFIODZzpEfZ5ix5GcLapB8/QIwQgxiIRa3WkTMc0uyv+mddlbKuILFnI9A1I+TQe N4gmKeYXwWRyxLa6y7/B3lVzuLxf4DpcxfS2c3A65MkYi09XPA9oXCy7JjzsmEiZ z2Lu8lTe6hg8VarBTogHBxiEU7ybfDCnHWj7/Oe6zz8tS/R0i0ndNBu9xmaCqSh7 QC8++eqCaS+zfW0uTmnGDo1/zWLBblCZ5HAHG8bLlPHezUbekNz6G1D4CVwFyNQ8 wy1Gjy8nFWc+rwUl1CTgJ+A7wodGrMCyt5SmcNUVBOWdlSmli5vFJp61ET6UdrV+ +8owATwwIm8hbkIAI4037j7pMgrO27d130GRxFwgG9GNoqew2AM7y/9HrlmW49PE IqJA4Pm3zg26IhLIRcH7jLg3oKGuFf0nkMTDoooI5a9DlcsCXPuGd0FBw2WbR71D Px6dlVoAW0NrP2tm8YzkTKIT+aN+UId4Vdi2oFs1t8Sye/U+LCjvwrXPk13pZKdR VxfM1oVxeRwiAUq0VuIrnj7windF5Mpy2hDLHeWjzQmLcEGAtCYEGyxKTBkNTtPt gm9XBzT6Rbzi+Sc++ZoHYHe1g4T66sjYOp4N90sRRMD3FR97ZyW8eD01gwf6p1Uy aCOrA+sRHK3F =hPvl -----END PGP SIGNATURE----- Merge tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "For the 6.0 merge window the modules code shifts to cleanup and minor fixes effort. This becomes much easier to do and review now due to the code split to its own directory from effort on the last kernel release. I expect to see more of this with time and as we expand on test coverage in the future. The cleanups and fixes come from usual suspects such as Christophe Leroy and Aaron Tomlin but there are also some other contributors. One particular minor fix worth mentioning is from Helge Deller, where he spotted a *forever* incorrect natural alignment on both ELF section header tables: * .altinstructions * __bug_table sections A lot of back and forth went on in trying to determine the ill effects of this misalignment being present for years and it has been determined there should be no real ill effects unless you have a buggy exception handler. Helge actually hit one of these buggy exception handlers on parisc which is how he ended up spotting this issue. When implemented correctly these paths with incorrect misalignment would just mean a performance penalty, but given that we are dealing with alternatives on modules and with the __bug_table (where info regardign BUG()/WARN() file/line information associated with it is stored) this really shouldn't be a big deal. The only other change with mentioning is the kmap() with kmap_local_page() and my only concern with that was on what is done after preemption, but the virtual addresses are restored after preemption. This is only used on module decompression. This all has sit on linux-next for a while except the kmap stuff which has been there for 3 weeks" * tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: Replace kmap() with kmap_local_page() module: Show the last unloaded module's taint flag(s) module: Use strscpy() for last_unloaded_module module: Modify module_flags() to accept show_state argument module: Move module's Kconfig items in kernel/module/ MAINTAINERS: Update file list for module maintainers module: Use vzalloc() instead of vmalloc()/memset(0) modules: Ensure natural alignment for .altinstructions and __bug_table sections module: Increase readability of module_kallsyms_lookup_name() module: Fix ERRORs reported by checkpatch.pl module: Add support for default value for module async_probe	2022-08-08 14:12:19 -07:00
Kim Phillips	e6cfcdda8c	x86/bugs: Enable STIBP for IBPB mitigated RETBleed ... AMD's "Technical Guidance for Mitigating Branch Type Confusion, Rev. 1.0 2022-07-12" whitepaper, under section 6.1.2 "IBPB On Privileged Mode Entry / SMT Safety" says: Similar to the Jmp2Ret mitigation, if the code on the sibling thread cannot be trusted, software should set STIBP to 1 or disable SMT to ensure SMT safety when using this mitigation. So, like already being done for retbleed=unret, and now also for retbleed=ibpb, force STIBP on machines that have it, and report its SMT vulnerability status accordingly. [ bp: Remove the "we" and remove "[AMD]" applicability parameter which doesn't work here. ] Fixes: 3ebc170068 ("x86/bugs: Add retbleed=ibpb") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # 5.10, 5.15, 5.19 Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Link: https://lore.kernel.org/r/20220804192201.439596-1-kim.phillips@amd.com	2022-08-08 19:12:17 +02:00
Linus Torvalds	eb5699ba31	Updates to various subsystems which I help look after. lib, ocfs2, ... fatfs, autofs, squashfs, procfs, etc. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9 kwS/13j38guulSlXRzDLmitbg81zAAI= =Zfum -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...	2022-08-07 10:03:24 -07:00
Linus Torvalds	cae4199f93	powerpc updates for 6.0 ... - Add support for syscall stack randomization. - Add support for atomic operations to the 32 & 64-bit BPF JIT. - Full support for KASAN on 64-bit Book3E. - Add a watchdog driver for the new PowerVM hypervisor watchdog. - Add a number of new selftests for the Power10 PMU support. - Add a driver for the PowerVM Platform KeyStore. - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency. - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment. - Many other small features and fixes. Thanks to: Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, Zhouyi Zhou. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmLuAPgTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgBPpD/9kY/T0qlOXABxlZCgtqeAjPX+2xpnY BF+TlsN1TS1auFcEZL2BapmVacsvOeGEFDVuZHZvZJc69Hx+gSjnjFCnZjp6n+Yz wt6y9w9Pu0t/sjD5vNQ46O15/dXqm6RoVI7um12j/WLMN8Ko5+x3gKAyQONjQd2/ 1kPcxVH6FUosAdnCuvIcqCX4e4IIHl2ZkitHOTXoQUvUy9oAK/mOBnwqZ6zLGUKC E5M+Zyt4RFGxhPs48FkX6Nq6crDGU/P0VJpDKkR/t7GHnE67Bm70gZougAPrzrgP nx8zoTWgDKpqDeuqK7pFcyKgNS3dKbxsN3sAfKHOWu/YnV4wMyy+7fmwagMauki7 lXccKN6F/r+8JcMNx80Jp/dAw3ZdLceP38M3Ryf8IL6lTfkNySumUvrKJn6r1Cu1 wvzhgyEuDawss9KHdEmXcA2i3+XVZvitaipO7JWUC8pblrP1SJMoPfIIe9zh3y3M pyZj0TcGJ8XaK+badvI+PW/K/KeRgXEY8HpC3wDHSoIkli3OE4jDwXn6TiZgvm3n k0sKL8YSmQZ8hP8QAkR+r8NQKYqLlfyPxdslK5omDPxfub5Uzk9ZV2Ep7svkaiQn Wqjq27Dpz8+w0XPjsQ0Tkv+ByTkOhrawOH7x9SpFLHpv9g5otcYmS79NkO/htx8C 6LyPNx1VYn5IRA== =tRkm -----END PGP SIGNATURE----- Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...	2022-08-06 16:38:17 -07:00
Linus Torvalds	c993e07be0	dma-mapping updates ... - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy, Christoph Hellwig) - restructure the PCIe peer to peer mapping support (Logan Gunthorpe) - allow the IOMMU code to communicate an optional DMA mapping length and use that in scsi and libata (John Garry) - split the global swiotlb lock (Tianyu Lan) - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang, Lukas Bulwahn, Robin Murphy) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmLuIYULHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPS5A//Ty1ZNyXExmwZ6J6g7/oIvQlpAHilDr22mCd8tR8Y Ne7TgLa/X+usFvJTxJfkvg/LNMDjD7qx0J/mhDGm4reOFcEL4/PBy0rDSOgnmntV k/fPhgwnpuztiAQ+s+WkJ3pkrmG1HaEId7GGj2JaoYdas6RX2mGX7vL8uvUFepjw lYPAqWMtJHkOfsDK0PqqyQsr7dcC6lyFLqnn/wqvHtTJeKCfGs6W/SIrlWme2SZY 3dNx84ZR1uPjaazAmtf2IWfjh/TBmd0ETRYycgUUKRP9iwsCkBQDBwsBGSIYXiWj BUKQ5oMvjAlUGRF0jYz9e77KuedE6GxWiXNQstitBmid142M37DHA5tvZRf65MPS THHcjTDmmoaO4YfFhhXOcFOrjG4/V8bF7fgHB6XkHDjhVVTcnIx8zuOAXIVBZvIV VAALmamBqEfIZZrCqgr7hzFssK2bip+TIMkdoD46Wcr+D7bAlujhuzWxubn9+ulT 23v/pAvC80ut6LvKj6EA+GpRm/pejfOtEbjXPoO2hguNxvuUKvPQqNh9hy0q+v1e 8n2Y/4lhy5bv02S7wKooNkfCoV753jBY1TIru45UmEYc3EkTQPii6okYe0DvW4QX VCnKgo156wSBfE+9eWdxCROv2SZqJFMV/wL3vw54dpJQMbDy7VkNsh4mGREdUkU1 uek= =Bv19 -----END PGP SIGNATURE----- Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy, Christoph Hellwig) - restructure the PCIe peer to peer mapping support (Logan Gunthorpe) - allow the IOMMU code to communicate an optional DMA mapping length and use that in scsi and libata (John Garry) - split the global swiotlb lock (Tianyu Lan) - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang, Lukas Bulwahn, Robin Murphy) * tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits) swiotlb: fix passing local variable to debugfs_create_ulong() dma-mapping: reformat comment to suppress htmldoc warning PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg() RDMA/rw: drop pci_p2pdma_[un]map_sg() RDMA/core: introduce ib_dma_pci_p2p_dma_supported() nvme-pci: convert to using dma_map_sgtable() nvme-pci: check DMA ops when indicating support for PCI P2PDMA iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg iommu: Explicitly skip bus address marked segments in __iommu_map_sg() dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support dma-direct: support PCI P2PDMA pages in dma-direct map_sg dma-mapping: allow EREMOTEIO return code for P2PDMA transfers PCI/P2PDMA: Introduce helpers for dma_map_sg implementations PCI/P2PDMA: Attempt to set map_type if it has not been set lib/scatterlist: add flag for indicating P2PDMA segments in an SGL swiotlb: clean up some coding style and minor issues dma-mapping: update comment after dmabounce removal scsi: sd: Add a comment about limiting max_sectors to shost optimal limit ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit ...	2022-08-06 10:56:45 -07:00
Linus Torvalds	1d239c1eb8	IOMMU Updates for Linux v5.20/v6.0: ... Including: - Most intrusive patch is small and changes the default allocation policy for DMA addresses. Before the change the allocator tried its best to find an address in the first 4GB. But that lead to performance problems when that space gets exhaused, and since most devices are capable of 64-bit DMA these days, we changed it to search in the full DMA-mask range from the beginning. This change has the potential to uncover bugs elsewhere, in the kernel or the hardware. There is a Kconfig option and a command line option to restore the old behavior, but none of them is enabled by default. - Add Robin Murphy as reviewer of IOMMU code and maintainer for the dma-iommu and iova code - Chaning IOVA magazine size from 1032 to 1024 bytes to save memory - Some core code cleanups and dead-code removal - Support for ACPI IORT RMR node - Support for multiple PCI domains in the AMD-Vi driver - ARM SMMU changes from Will Deacon: - Add even more Qualcomm device-tree compatible strings - Support dumping of IMP DEF Qualcomm registers on TLB sync timeout - Fix reference count leak on device tree node in Qualcomm driver - Intel VT-d driver updates from Lu Baolu: - Make intel-iommu.h private - Optimize the use of two locks - Extend the driver to support large-scale platforms - Cleanup some dead code - MediaTek IOMMU refactoring and support for TTBR up to 35bit - Basic support for Exynos SysMMU v7 - VirtIO IOMMU driver gets a map/unmap_pages() implementation - Other smaller cleanups and fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmLs3DIACgkQK/BELZcB GuMizhAAguAnLLOkOLlR9/MhrTZfNXCUX+bfrEIevjFXMw4iPNfCCr4ydQ7EdVK6 ZA/3Z89huYl0d0x/FELolnQi+HOeqYrfTDe4rB7TgNgwZnWa+fdHcyYkgBGyfPaV ilgjNcx8o//9o4NasyB6kU395jVmFxb735gMTTb+tcO9fr+/qIB6hxrHuCklxrNr C7wK6kkoDPi5n0QuXCSjXEx2Hk245pAWKPLwqxsUYzHGlLfl7ULOxw65BUBGvn/H uCsTfJFu7u+ErwQYf0qPuOwRBnRdsx9g5EAnfab8p074SoKWvbNnftIxgIRp8ZEM YgCbhYa1GOFI4r+XzqRzEbc0/vPSttims4Jqz0KxYs7pr5EoVifrWLJFjJdCdc2h Tio1gTvOq8HbH63kwYNKJhg4iSC6zVd37ihEhvfFO6LcgFl4iCfd2o9zK7oY40J4 XoOxofVnJ2e3tzdhZ/n5quCXiudHixm6WuVa7QYKscF7Ud0tY1wWKuibdlMQTeNM 68MvtlteKcfs1BrWzZyrFMrFeAfIY8LI82y6jdJuoNMU5LE9+5yelXBdJhnVygZ+ Jglv1TIt6W/z1H5JgXtNVZ1wWgBm7rurOqNyfN8XCd8eP1z321CLfX8ujkhKrIWP ApG15cwvpnh1JX630+UFiEikTGU0fb2orMdPwYmwuu8DAsoLVHE= =hI2K -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - The most intrusive patch is small and changes the default allocation policy for DMA addresses. Before the change the allocator tried its best to find an address in the first 4GB. But that lead to performance problems when that space gets exhaused, and since most devices are capable of 64-bit DMA these days, we changed it to search in the full DMA-mask range from the beginning. This change has the potential to uncover bugs elsewhere, in the kernel or the hardware. There is a Kconfig option and a command line option to restore the old behavior, but none of them is enabled by default. - Add Robin Murphy as reviewer of IOMMU code and maintainer for the dma-iommu and iova code - Chaning IOVA magazine size from 1032 to 1024 bytes to save memory - Some core code cleanups and dead-code removal - Support for ACPI IORT RMR node - Support for multiple PCI domains in the AMD-Vi driver - ARM SMMU changes from Will Deacon: - Add even more Qualcomm device-tree compatible strings - Support dumping of IMP DEF Qualcomm registers on TLB sync timeout - Fix reference count leak on device tree node in Qualcomm driver - Intel VT-d driver updates from Lu Baolu: - Make intel-iommu.h private - Optimize the use of two locks - Extend the driver to support large-scale platforms - Cleanup some dead code - MediaTek IOMMU refactoring and support for TTBR up to 35bit - Basic support for Exynos SysMMU v7 - VirtIO IOMMU driver gets a map/unmap_pages() implementation - Other smaller cleanups and fixes * tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits) iommu/amd: Fix compile warning in init code iommu/amd: Add support for AVIC when SNP is enabled iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement ACPI/IORT: Fix build error implicit-function-declaration drivers: iommu: fix clang -wformat warning iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop iommu/arm-smmu-qcom: Add SM6375 SMMU compatible dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375 MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled iommu/amd: Set translation valid bit only when IO page tables are in use iommu/amd: Introduce function to check and enable SNP iommu/amd: Globally detect SNP support iommu/amd: Process all IVHDs before enabling IOMMU features iommu/amd: Introduce global variable for storing common EFR and EFR2 iommu/amd: Introduce Support for Extended Feature 2 Register iommu/amd: Change macro for IOMMU control register bit shift to decimal value iommu/exynos: Enable default VM instance on SysMMU v7 iommu/exynos: Add SysMMU v7 register set ...	2022-08-06 10:42:38 -07:00
Linus Torvalds	6614a3c316	- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe ... Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/ SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE= =w/UH -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...	2022-08-05 16:32:45 -07:00
Linus Torvalds	7c5c3a6177	ARM: ... * Unwinder implementations for both nVHE modes (classic and protected), complete with an overflow stack * Rework of the sysreg access from userspace, with a complete rewrite of the vgic-v3 view to allign with the rest of the infrastructure * Disagregation of the vcpu flags in separate sets to better track their use model. * A fix for the GICv2-on-v3 selftest * A small set of cosmetic fixes RISC-V: * Track ISA extensions used by Guest using bitmap * Added system instruction emulation framework * Added CSR emulation framework * Added gfp_custom flag in struct kvm_mmu_memory_cache * Added G-stage ioremap() and iounmap() functions * Added support for Svpbmt inside Guest s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes x86: * Permit guests to ignore single-bit ECC errors * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Use try_cmpxchg64 instead of cmpxchg64 * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * Allow NX huge page mitigation to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs * Miscellaneous cleanups: ** MCE MSR emulation ** Use separate namespaces for guest PTEs and shadow PTEs bitmasks ** PIO emulation ** Reorganize rmap API, mostly around rmap destruction ** Do not workaround very old KVM bugs for L0 that runs with nesting enabled ** new selftests API for CPUID Generic: * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA== =PM8o -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "Quite a large pull request due to a selftest API overhaul and some patches that had come in too late for 5.19. ARM: - Unwinder implementations for both nVHE modes (classic and protected), complete with an overflow stack - Rework of the sysreg access from userspace, with a complete rewrite of the vgic-v3 view to allign with the rest of the infrastructure - Disagregation of the vcpu flags in separate sets to better track their use model. - A fix for the GICv2-on-v3 selftest - A small set of cosmetic fixes RISC-V: - Track ISA extensions used by Guest using bitmap - Added system instruction emulation framework - Added CSR emulation framework - Added gfp_custom flag in struct kvm_mmu_memory_cache - Added G-stage ioremap() and iounmap() functions - Added support for Svpbmt inside Guest s390: - add an interface to provide a hypervisor dump for secure guests - improve selftests to use TAP interface - enable interpretive execution of zPCI instructions (for PCI passthrough) - First part of deferred teardown - CPU Topology - PV attestation - Minor fixes x86: - Permit guests to ignore single-bit ECC errors - Intel IPI virtualization - Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS - PEBS virtualization - Simplify PMU emulation by just using PERF_TYPE_RAW events - More accurate event reinjection on SVM (avoid retrying instructions) - Allow getting/setting the state of the speaker port data bit - Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent - "Notify" VM exit (detect microarchitectural hangs) for Intel - Use try_cmpxchg64 instead of cmpxchg64 - Ignore benign host accesses to PMU MSRs when PMU is disabled - Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior - Allow NX huge page mitigation to be disabled on a per-vm basis - Port eager page splitting to shadow MMU as well - Enable CMCI capability by default and handle injected UCNA errors - Expose pid of vcpu threads in debugfs - x2AVIC support for AMD - cleanup PIO emulation - Fixes for LLDT/LTR emulation - Don't require refcounted "struct page" to create huge SPTEs - Miscellaneous cleanups: - MCE MSR emulation - Use separate namespaces for guest PTEs and shadow PTEs bitmasks - PIO emulation - Reorganize rmap API, mostly around rmap destruction - Do not workaround very old KVM bugs for L0 that runs with nesting enabled - new selftests API for CPUID Generic: - Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache - new selftests API using struct kvm_vcpu instead of a (vm, id) tuple" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits) selftests: kvm: set rax before vmcall selftests: KVM: Add exponent check for boolean stats selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test selftests: KVM: Check stat name before other fields KVM: x86/mmu: remove unused variable RISC-V: KVM: Add support for Svpbmt inside Guest/VM RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap() RISC-V: KVM: Add G-stage ioremap() and iounmap() functions KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache RISC-V: KVM: Add extensible CSR emulation framework RISC-V: KVM: Add extensible system instruction emulation framework RISC-V: KVM: Factor-out instruction emulation into separate sources RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function RISC-V: KVM: Fix variable spelling mistake RISC-V: KVM: Improve ISA extension by using a bitmap KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs() KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT KVM: x86: Do not block APIC write for non ICR registers ...	2022-08-04 14:59:54 -07:00
Linus Torvalds	aad26f55f4	This was a moderately busy cycle for documentation, but nothing all that ... earth-shaking: - More Chinese translations, and an update to the Italian translations. The Japanese, Korean, and traditional Chinese translations are more-or-less unmaintained at this point, instead. - Some build-system performance improvements. - The removal of the archaic submitting-drivers.rst document, with the movement of what useful material that remained into other docs. - Improvements to sphinx-pre-install to, hopefully, give more useful suggestions. - A number of build-warning fixes Plus the usual collection of typo fixes, updates, and more. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0 +C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0= =83BG -----END PGP SIGNATURE----- Merge tag 'docs-6.0' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "This was a moderately busy cycle for documentation, but nothing all that earth-shaking: - More Chinese translations, and an update to the Italian translations. The Japanese, Korean, and traditional Chinese translations are more-or-less unmaintained at this point, instead. - Some build-system performance improvements. - The removal of the archaic submitting-drivers.rst document, with the movement of what useful material that remained into other docs. - Improvements to sphinx-pre-install to, hopefully, give more useful suggestions. - A number of build-warning fixes Plus the usual collection of typo fixes, updates, and more" * tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits) docs: efi-stub: Fix paths for x86 / arm stubs Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8 Docs/zh_CN: Update the translation of pci to 5.19-rc8 Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8 Docs/zh_CN: Update the translation of usage to 5.19-rc8 Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8 Docs/zh_CN: Update the translation of sparse to 5.19-rc8 Docs/zh_CN: Update the translation of kasan to 5.19-rc8 Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8 doc:it_IT: align Italian documentation docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst Documentation: process: Update email client instructions for Thunderbird docs: ABI: correct QEMU fw_cfg spec path doc/zh_CN: remove submitting-driver reference from docs docs: zh_TW: align to submitting-drivers removal docs: zh_CN: align to submitting-drivers removal docs: ko_KR: howto: remove reference to removed submitting-drivers docs: ja_JP: howto: remove reference to removed submitting-drivers docs: it_IT: align to submitting-drivers removal docs: process: remove outdated submitting-drivers.rst ...	2022-08-02 19:24:24 -07:00
Linus Torvalds	7d9d077c78	RCU pull request for v5.20 (or whatever) ... This pull request contains the following branches: doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms. poll.2022.07.21a: Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods. rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead. torture.2022.06.21a: Torture-test updates. ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r vX60+QNxvUBLwA== =vUNm -----END PGP SIGNATURE----- Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...	2022-08-02 19:12:45 -07:00
Linus Torvalds	a0b09f2d6f	Random number generator updates for Linux 6.0-rc1. ... -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmLnDOwACgkQSfxwEqXe A65Fiw//Z0YaPejSslQIGitQ1b0XzdWBhyJArYDieaaiQRXMqlaSKlIUqHz38xb7 +FykUY51/SJLjHV2riPxq1OK3/MPmk6VlTd0HHihcHVmg77oZcFcv2tPnDpZoqND TsBOujLbXKwxP8tNFedRY/4+K7w+ue9BTfDjuH7aCtz7uWd+4cNJmPg3x9FCfkMA +hbcRluwE9W3Pg4OCKwv+qxL0JF3qQtNKEOp1wpnjGAZZW/I9gFNgFBEkykvcAsj TkIRDc3agPFj6QgDeRIgLdnf9KCsLubKAg5oJneeCvQztJJUCSkn8nQXxpx+4sLo GsRgvCdfL/GyJqfSAzQJVYDHKtKMkJiCiWCC/oOALR8dzHJfSlULDAjbY1m/DAr9 at+vi4678Or7TNx2ZSaUlCXXKZ+UT7yWMlQWax9JuxGk1hGYP5/eT1AH5SGjqUwF w1q8oyzxt1vUcnOzEddFXPFirnqqhAk4dQFtu83+xKM4ZssMVyeB4NZdEhAdW0ng MX+RjrVj4l5gWWuoS0Cx3LUxDCgV6WT0dN+Vl9axAZkoJJbcXLEmXwQ6NbzTLPWg 1/MT7qFTxNcTCeAArMdZvvFbeh7pOBXO42pafrK/7vDRnTMUIw9tqXNLQUfvdFQp F5flPgiVRHDU2vSzKIFtnPTyXU0RBBGvNb4n0ss2ehH2DSsCxYE= =Zy3d -----END PGP SIGNATURE----- Merge tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "Though there's been a decent amount of RNG-related development during this last cycle, not all of it is coming through this tree, as this cycle saw a shift toward tackling early boot time seeding issues, which took place in other trees as well. Here's a summary of the various patches: - The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot option have been removed, as they overlapped with the more widely supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu". This change allowed simplifying a bit of arch code. - x86's RDRAND boot time test has been made a bit more robust, with RDRAND disabled if it's clearly producing bogus results. This would be a tip.git commit, technically, but I took it through random.git to avoid a large merge conflict. - The RNG has long since mixed in a timestamp very early in boot, on the premise that a computer that does the same things, but does so starting at different points in wall time, could be made to still produce a different RNG state. Unfortunately, the clock isn't set early in boot on all systems, so now we mix in that timestamp when the time is actually set. - User Mode Linux now uses the host OS's getrandom() syscall to generate a bootloader RNG seed and later on treats getrandom() as the platform's RDRAND-like faculty. - The arch_get_random_{seed_,}_long() family of functions is now arch_get_random_{seed_,}_longs(), which enables certain platforms, such as s390, to exploit considerable performance advantages from requesting multiple CPU random numbers at once, while at the same time compiling down to the same code as before on platforms like x86. - A small cleanup changing a cmpxchg() into a try_cmpxchg(), from Uros. - A comment spelling fix" More info about other random number changes that come in through various architecture trees in the full commentary in the pull request: https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/ * tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: correct spelling of "overwrites" random: handle archrandom with multiple longs um: seed rng using host OS rng random: use try_cmpxchg in _credit_init_bits timekeeping: contribute wall clock to rng on time change x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu" random: remove CONFIG_ARCH_RANDOM	2022-08-02 17:31:35 -07:00
Linus Torvalds	79802ada87	selinux/stable-6.0 PR 20220801 ... -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmLoEeIUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNSOhAAwWwRcmcHnk+k2agT9QjKrLo26NCO MQLE89o4y2ChEFHxC7F7SKoQRxtfYa323p1vmlGzKrlB+IZ6oqERVp4QNQQbXsfn n9VvVpxjRNHAetcRhCM9ZOchWjUdw6AMaJ8e3fdRNRESadAUUFDxifw1wpjgG9+i LmtDbfZ7vLs2grTf9OZy3JIl1VF3lVRUTI7ZBQggfJncMa+LXNWdVNmEe3yfyboA 1MwpSao7K2si0hBGAQo/UGQz4b19Tm4xMg8bSy7oTsP5Lae5ciPkeI3qazvs9usp WScZYhQ8NugqLbDbjs7dm6QCpj4x3dUs6ei48LKe3GF2mcGesFfOPo9sNHao4kKv C9t0f9qw+EhGvnNL7uQIDDf8OuTjuLWDvZSrMLID/IJKFF5NJ3y+XzaS9aPM3VEY qyOsX+cEzheXGhD6xE1sCo+AyPUDYqNDMIKBj2wlIGCKlzDGa8RT6VsQuvgf3c3K 43CnRCQeWDWOHCq3MnRe/fmYtW+JB7tsXiKAq4OJADacwPP36bsP3bqU8AlWYwDt tnuMa+LKusHnMEQpMPI8FW8qGdxwGSen+mymfLFIMgtwNGkV7WGRJ6Lbyn0SaR6v HyXgZASIOQRnamK3yZCDpxo0K81IVxPWJIjHyg53znqT5TCpXccPyV4HwbJKI/KG 8PtHrXOdPOGCZ2g= =WWq1 -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "A relatively small set of patches for SELinux this time, eight patches in total with really only one significant change. The highlights are: - Add support for proper labeling of memfd_secret anonymous inodes. This will allow LSMs that implement the anonymous inode hooks to apply security policy to memfd_secret() fds. - Various small improvements to memory management: fixed leaks, freed memory when needed, boundary checks. - Hardened the selinux_audit_data struct with __randomize_layout. - A minor documentation tweak to fix a formatting/style issue" * tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: selinux_add_opt() callers free memory selinux: Add boundary check in put_entry() selinux: fix memleak in security_read_state_kernel() docs: selinux: add '=' signs to kernel boot options mm: create security context for memfd_secret inodes selinux: fix typos in comments selinux: drop unnecessary NULL check selinux: add __randomize_layout to selinux_audit_data	2022-08-02 14:51:47 -07:00
Linus Torvalds	0cec3f24a7	arm64 updates for 5.20 ... - Remove unused generic cpuidle support (replaced by PSCI version) - Fix documentation describing the kernel virtual address space - Handling of some new CPU errata in Arm implementations - Rework of our exception table code in preparation for handling machine checks (i.e. RAS errors) more gracefully - Switch over to the generic implementation of ioremap() - Fix lockdep tracking in NMI context - Instrument our memory barrier macros for KCSAN - Rework of the kPTI G->nG page-table repainting so that the MMU remains enabled and the boot time is no longer slowed to a crawl for systems which require the late remapping - Enable support for direct swapping of 2MiB transparent huge-pages on systems without MTE - Fix handling of MTE tags with allocating new pages with HW KASAN - Expose the SMIDR register to userspace via sysfs - Continued rework of the stack unwinder, particularly improving the behaviour under KASAN - More repainting of our system register definitions to match the architectural terminology - Improvements to the layout of the vDSO objects - Support for allocating additional bits of HWCAP2 and exposing FEAT_EBF16 to userspace on CPUs that support it - Considerable rework and optimisation of our early boot code to reduce the need for cache maintenance and avoid jumping in and out of the kernel when handling relocation under KASLR - Support for disabling SVE and SME support on the kernel command-line - Support for the Hisilicon HNS3 PMU - Miscellanous cleanups, trivial updates and minor fixes -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmLeccUQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNCysB/4ml92RJLhVwRAofbtFfVgVz3JLTSsvob9x Z7FhNDxfM/G32wKtOHU9tHkGJ+PMVWOPajukzxkMhxmilfTyHBbiisNWVRjKQxj4 wrd07DNXPIv3bi8SWzS1y2y8ZqujZWjNJlX8SUCzEoxCVtuNKwrh96kU1jUjrkFZ kBo4E4wBWK/qW29nClGSCgIHRQNJaB/jvITlQhkqIb0pwNf3sAUzW7QoF1iTZWhs UswcLh/zC4q79k9poegdCt8chV5OBDLtLPnMxkyQFvsLYRp3qhyCSQQY/BxvO5JS jT9QR6d+1ewET9BFhqHlIIuOTYBCk3xn/PR9AucUl+ZBQd2tO4B1 =LVH0 -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Highlights include a major rework of our kPTI page-table rewriting code (which makes it both more maintainable and considerably faster in the cases where it is required) as well as significant changes to our early boot code to reduce the need for data cache maintenance and greatly simplify the KASLR relocation dance. Summary: - Remove unused generic cpuidle support (replaced by PSCI version) - Fix documentation describing the kernel virtual address space - Handling of some new CPU errata in Arm implementations - Rework of our exception table code in preparation for handling machine checks (i.e. RAS errors) more gracefully - Switch over to the generic implementation of ioremap() - Fix lockdep tracking in NMI context - Instrument our memory barrier macros for KCSAN - Rework of the kPTI G->nG page-table repainting so that the MMU remains enabled and the boot time is no longer slowed to a crawl for systems which require the late remapping - Enable support for direct swapping of 2MiB transparent huge-pages on systems without MTE - Fix handling of MTE tags with allocating new pages with HW KASAN - Expose the SMIDR register to userspace via sysfs - Continued rework of the stack unwinder, particularly improving the behaviour under KASAN - More repainting of our system register definitions to match the architectural terminology - Improvements to the layout of the vDSO objects - Support for allocating additional bits of HWCAP2 and exposing FEAT_EBF16 to userspace on CPUs that support it - Considerable rework and optimisation of our early boot code to reduce the need for cache maintenance and avoid jumping in and out of the kernel when handling relocation under KASLR - Support for disabling SVE and SME support on the kernel command-line - Support for the Hisilicon HNS3 PMU - Miscellanous cleanups, trivial updates and minor fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits) arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr} arm64: fix KASAN_INLINE arm64/hwcap: Support FEAT_EBF16 arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long arm64/hwcap: Document allocation of upper bits of AT_HWCAP arm64: enable THP_SWAP for arm64 arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52 arm64: errata: Remove AES hwcap for COMPAT tasks arm64: numa: Don't check node against MAX_NUMNODES drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node() docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags" mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON mm: kasan: Skip unpoisoning of user pages mm: kasan: Ensure the tags are visible before the tag in page->flags drivers/perf: hisi: add driver for HNS3 PMU drivers/perf: hisi: Add description for HNS3 PMU driver drivers/perf: riscv_pmu_sbi: perf format perf/arm-cci: Use the bitmap API to allocate bitmaps ...	2022-08-01 10:37:00 -07:00
Paolo Bonzini	63f4b21041	Merge remote-tracking branch 'kvm/next' into kvm-next-5.20 ... KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID	2022-08-01 03:21:00 -04:00
Eiichi Tsukata	ea304a8b89	docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed ... Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt" with the respective retbleed= settings. Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: corbet@lwn.net Link: https://lore.kernel.org/r/20220728043907.165688-1-eiichi.tsukata@nutanix.com	2022-07-29 20:47:07 +02:00
Joerg Roedel	c10100a416	Merge branches 'arm/exynos', 'arm/mediatek', 'arm/msm', 'arm/smmu', 'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next	2022-07-29 12:06:56 +02:00
Will Deacon	f96d67a8af	Merge branch 'for-next/boot' into for-next/core ... * for-next/boot: (34 commits) arm64: fix KASAN_INLINE arm64: Add an override for ID_AA64SMFR0_EL1.FA64 arm64: Add the arm64.nosve command line option arm64: Add the arm64.nosme command line option arm64: Expose a __check_override primitive for oddball features arm64: Allow the idreg override to deal with variable field width arm64: Factor out checking of a feature against the override into a macro arm64: Allow sticky E2H when entering EL1 arm64: Save state of HCR_EL2.E2H before switch to EL1 arm64: Rename the VHE switch to "finalise_el2" arm64: mm: fix booting with 52-bit address space arm64: head: remove __PHYS_OFFSET arm64: lds: use PROVIDE instead of conditional definitions arm64: setup: drop early FDT pointer helpers arm64: head: avoid relocating the kernel twice for KASLR arm64: kaslr: defer initialization to initcall where permitted arm64: head: record CPU boot mode after enabling the MMU arm64: head: populate kernel page tables with MMU and caches on arm64: head: factor out TTBR1 assignment into a macro arm64: idreg-override: use early FDT mapping in ID map ...	2022-07-25 10:59:15 +01:00
Linus Torvalds	4ba1329cbb	Urgent RCU pull request for v5.19 ... This pull request contains a pair of commits that fix 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU"), which was itself a fix to an SRCU expedited grace-period problem that could prevent kernel live patching (KLP) from completing. That SRCU fix for KLP introduced large (as in minutes) boot-time delays to embedded Linux kernels running on qemu/KVM. These delays were due to the emulation of certain MMIO operations controlling memory layout, which were emulated with one expedited grace period per access. Common configurations required thousands of boot-time MMIO accesses, and thus thousands of boot-time expedited SRCU grace periods. In these configurations, the occasional sleeps that allowed KLP to proceed caused excessive boot delays. These commits preserve enough sleeps to permit KLP to proceed, but few enough that the virtual embedded kernels still boot reasonably quickly. This represents a regression introduced in the v5.19 merge window, and the bug is causing significant inconvenience, hence this pull request. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLZ6LoTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jNHgD/4tb8Un6vZlrEaYbyA/ztUITX/2DisS kiqbQz1BH8V3B3PxSo4ldEiw+z3fC3SMyIPymuu9bhwm6SFdjEsarFkIqySxkYnX jnuk0JbWxs4Kk64rIkHHzAxzvM2Iw1EjSzjP1M+DC7iymSJpsgp+0zFJJtcJ8Y87 67hbQRQYk+1T7ZT+vq77NiyAAFEzSd8UydgBVxlsOOdkXQ91NYTyB8D6ldUJAnLU opwCEpgpu74Sp4Te5q6f9uAt8xZmXsyrm8zJgzTz0KSgivcpt4GmIoyEFYUQczj0 Hewr6+qM9AWfvfQxNvRCS25yeox18kbdp1qdp9rl0BZMtYN2Zsk1Ec4c79s7NBLc G3TIvJkGLHuZO1dO4BhLkYczgRYlaPxOR/0GKNn4m69/TbVmseUL1WeZS0pswB0q cH1AKKEg9KdPoaX0hTLoOrlv/vwbgjhKKuoqEv7yEUhJJdACy50rmnhWhSxeuQDb aIITVKkjkwpDtRX5QTdG1f5uIMoGz9BbUDv7VeodB0mrYHluXEfyNTwlqcISKAgm T9kLmsdfvMrQ4fLR5S3i3dwnL3b52OB8h5NyfW3YRkXEnA7//ef/XpPiW2HY8BMT 7QwPqOoUSr/IraAcI8j0QxRpioUk1oaNi+UJ3FSHni8re6rZ0kaxatRCT20h6Djq C9RVLaevw3bGXQ== =ndhB -----END PGP SIGNATURE----- Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This contains a pair of commits that fix 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU"), which was itself a fix to an SRCU expedited grace-period problem that could prevent kernel live patching (KLP) from completing. That SRCU fix for KLP introduced large (as in minutes) boot-time delays to embedded Linux kernels running on qemu/KVM. These delays were due to the emulation of certain MMIO operations controlling memory layout, which were emulated with one expedited grace period per access. Common configurations required thousands of boot-time MMIO accesses, and thus thousands of boot-time expedited SRCU grace periods. In these configurations, the occasional sleeps that allowed KLP to proceed caused excessive boot delays. These commits preserve enough sleeps to permit KLP to proceed, but few enough that the virtual embedded kernels still boot reasonably quickly. This represents a regression introduced in the v5.19 merge window, and the bug is causing significant inconvenience" * tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: srcu: Make expedited RCU grace periods block even less frequently srcu: Block less aggressively for expedited grace periods	2022-07-22 10:01:20 -07:00
Tianyu Lan	7231180903	swiotlb: clean up some coding style and minor issues ... - Fix the used field of struct io_tlb_area wasn't initialized - Set area number to be 0 if input area number parameter is 0 - Use array_size() to calculate io_tlb_area array size - Make parameters of swiotlb_do_find_slots() more reasonable Fixes: 26ffb91fa5e0 ("swiotlb: split up the global swiotlb lock") Signed-off-by: Tianyu Lan <tiala@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>	2022-07-22 17:20:56 +02:00
Paul E. McKenney	d38c8fe483	Merge branches 'doc.2022.06.21a', 'fixes.2022.07.19a', 'nocb.2022.07.19a', 'poll.2022.07.21a', 'rcu-tasks.2022.06.21a' and 'torture.2022.06.21a' into HEAD ... doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates. poll.2022.07.21a: Polled grace-period updates. rcu-tasks.2022.06.21a: Tasks RCU updates. torture.2022.06.21a: Torture-test updates.	2022-07-21 17:43:16 -07:00
Joel Fernandes	b37a667c62	rcu/nocb: Add an option to offload all CPUs on boot ... Systems built with CONFIG_RCU_NOCB_CPU=y but booted without either the rcu_nocbs= or rcu_nohz_full= kernel-boot parameters will not have callback offloading on any of the CPUs, nor can any of the CPUs be switched to enable callback offloading at runtime. Although this is intentional, it would be nice to have a way to offload all the CPUs without having to make random bootloaders specify either the rcu_nocbs= or the rcu_nohz_full= kernel-boot parameters. This commit therefore provides a new CONFIG_RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that switches the default so as to offload callback processing on all of the CPUs. This default can still be overridden using the rcu_nocbs= and rcu_nohz_full= kernel-boot parameters. Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Reviewed-by: Uladzislau Rezki <urezki@gmail.com> (In v4.1, fixed issues with CONFIG maze reported by kernel test robot). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>	2022-07-19 11:43:34 -07:00
Neeraj Upadhyay	4f2bfd9494	srcu: Make expedited RCU grace periods block even less frequently ... The purpose of commit 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU") was to prevent a long series of never-blocking expedited SRCU grace periods from blocking kernel-live-patching (KLP) progress. Although it was successful, it also resulted in excessive boot times on certain embedded workloads running under qemu with the "-bios QEMU_EFI.fd" command line. Here "excessive" means increasing the boot time up into the three-to-four minute range. This increase in boot time was due to the more than 6000 back-to-back invocations of synchronize_rcu_expedited() within the KVM host OS, which in turn resulted from qemu's emulation of a long series of MMIO accesses. Commit 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods") did not significantly help this particular use case. Zhangfei Gao and Shameerali Kolothum Thodi did experiments varying the value of SRCU_MAX_NODELAY_PHASE with HZ=250 and with various values of non-sleeping per phase counts on a system with preemption enabled, and observed the following boot times: +──────────────────────────+────────────────+ | SRCU_MAX_NODELAY_PHASE | Boot time (s) | +──────────────────────────+────────────────+ | 100 | 30.053 | | 150 | 25.151 | | 200 | 20.704 | | 250 | 15.748 | | 500 | 11.401 | | 1000 | 11.443 | | 10000 | 11.258 | | 1000000 | 11.154 | +──────────────────────────+────────────────+ Analysis on the experiment results show additional improvements with CPU-bound delays approaching one jiffy in duration. This improvement was also seen when number of per-phase iterations were scaled to one jiffy. This commit therefore scales per-grace-period phase number of non-sleeping polls so that non-sleeping polls extend for about one jiffy. In addition, the delay-calculation call to srcu_get_delay() in srcu_gp_end() is replaced with a simple check for an expedited grace period. This change schedules callback invocation immediately after expedited grace periods complete, which results in greatly improved boot times. Testing done by Marc and Zhangfei confirms that this change recovers most of the performance degradation in boottime; for CONFIG_HZ_250 configuration, specifically, boot times improve from 3m50s to 41s on Marc's setup; and from 2m40s to ~9.7s on Zhangfei's setup. In addition to the changes to default per phase delays, this change adds 3 new kernel parameters - srcutree.srcu_max_nodelay, srcutree.srcu_max_nodelay_phase, and srcutree.srcu_retry_check_delay. This allows users to configure the srcu grace period scanning delays in order to more quickly react to additional use cases. Fixes: 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods") Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU") Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reported-by: yueluck <yueluck@163.com> Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org> Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/ Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2022-07-19 11:39:59 -07:00
Jason A. Donenfeld	049f9ae93d	x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu" ... The decision of whether or not to trust RDRAND is controlled by the "random.trust_cpu" boot time parameter or the CONFIG_RANDOM_TRUST_CPU compile time default. The "nordrand" flag was added during the early days of RDRAND, when there were worries that merely using its values could compromise the RNG. However, these days, RDRAND values are not used directly but always go through the RNG's hash function, making "nordrand" no longer useful. Rather, the correct switch is "random.trust_cpu", which not only handles the relevant trust issue directly, but also is general to multiple CPU types, not just x86. However, x86 RDRAND does have a history of being occasionally problematic. Prior, when the kernel would notice something strange, it'd warn in dmesg and suggest enabling "nordrand". We can improve on that by making the test a little bit better and then taking the step of automatically disabling RDRAND if we detect it's problematic. Also disable RDSEED if the RDRAND test fails. Cc: x86@kernel.org Cc: Theodore Ts'o <tytso@mit.edu> Suggested-by: H. Peter Anvin <hpa@zytor.com> Suggested-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>	2022-07-18 15:04:04 +02:00
Dan Moulding	5a704629f2	init: add "hostname" kernel parameter ... The gethostname system call returns the hostname for the current machine. However, the kernel has no mechanism to initially set the current machine's name in such a way as to guarantee that the first userspace process to call gethostname will receive a meaningful result. It relies on some unspecified userspace process to first call sethostname before gethostname can produce a meaningful name. Traditionally the machine's hostname is set from userspace by the init system. The init system, in turn, often relies on a configuration file (say, /etc/hostname) to provide the value that it will supply in the call to sethostname. Consequently, the file system containing /etc/hostname usually must be available before the hostname will be set. There may, however, be earlier userspace processes that could call gethostname before the file system containing /etc/hostname is mounted. Such a process will get some other, likely meaningless, name from gethostname (such as "(none)", "localhost", or "darkstar"). A real-world example where this can happen, and lead to undesirable results, is with mdadm. When assembling arrays, mdadm distinguishes between "local" arrays and "foreign" arrays. A local array is one that properly belongs to the current machine, and a foreign array is one that is (possibly temporarily) attached to the current machine, but properly belongs to some other machine. To determine if an array is local or foreign, mdadm may compare the "homehost" recorded on the array with the current hostname. If mdadm is run before the root file system is mounted, perhaps because the root file system itself resides on an md-raid array, then /etc/hostname isn't yet available and the init system will not yet have called sethostname, causing mdadm to incorrectly conclude that all of the local arrays are foreign. Solving this problem *could* be delegated to the init system. It could be left up to the init system (including any init system that starts within an initramfs, if one is in use) to ensure that sethostname is called before any other userspace process could possibly call gethostname. However, it may not always be obvious which processes could call gethostname (for example, udev itself might not call gethostname, but it could via udev rules invoke processes that do). Additionally, the init system has to ensure that the hostname configuration value is stored in some place where it will be readily accessible during early boot. Unfortunately, every init system will attempt to (or has already attempted to) solve this problem in a different, possibly incorrect, way. This makes getting consistently working configurations harder for users. I believe it is better for the kernel to provide the means by which the hostname may be set early, rather than making this a problem for the init system to solve. The option to set the hostname during early startup, via a kernel parameter, provides a simple, reliable way to solve this problem. It also could make system configuration easier for some embedded systems. [dmoulding@me.com: v2] Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.com Signed-off-by: Dan Moulding <dmoulding@me.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-07-17 17:31:37 -07:00
Tianyu Lan	20347fca71	swiotlb: split up the global swiotlb lock ... Traditionally swiotlb was not performance critical because it was only used for slow devices. But in some setups, like TDX/SEV confidential guests, all IO has to go through swiotlb. Currently swiotlb only has a single lock. Under high IO load with multiple CPUs this can lead to significat lock contention on the swiotlb lock. This patch splits the swiotlb bounce buffer pool into individual areas which have their own lock. Each CPU tries to allocate in its own area first. Only if that fails does it search other areas. On freeing the allocation is freed into the area where the memory was originally allocated from. Area number can be set via swiotlb kernel parameter and is default to be possible cpu number. If possible cpu number is not power of 2, area number will be round up to the next power of 2. This idea from Andi Kleen patch(https://github.com/intel/tdx/commit/ 4529b5784c141782c72ec9bd9a92df2b68cb7d45). Based-on-idea-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>	2022-07-13 13:23:10 +02:00
Saravana Kannan	ae39e9ed96	module: Add support for default value for module async_probe ... Add a module.async_probe kernel command line option that allows enabling async probing for all modules. When this command line option is used, there might still be some modules for which we want to explicitly force synchronous probing, so extend <modulename>.async_probe to take an optional bool input so that async probing can be disabled for a specific module. Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>	2022-07-11 10:49:14 -07:00
Mauro Carvalho Chehab	7ac3945d8e	Documentation: KVM: update amd-memory-encryption.rst references ... Changeset daec8d4083 ("Documentation: KVM: add separate directories for architecture-specific documentation") renamed: Documentation/virt/kvm/amd-memory-encryption.rst to: Documentation/virt/kvm/x86/amd-memory-encryption.rst. Update the cross-references accordingly. Fixes: daec8d4083 ("Documentation: KVM: add separate directories for architecture-specific documentation") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/fd80db889e34aae87a4ca88cad94f650723668f4.1656234456.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2022-07-07 13:09:59 -06:00
Suravee Suthikulpanit	bbe3a10658	iommu/amd: Add PCI segment support for ivrs_[ioapic/hpet/acpihid] commands ... By default, PCI segment is zero and can be omitted. To support system with non-zero PCI segment ID, modify the parsing functions to allow PCI segment ID. Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20220706113825.25582-33-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>	2022-07-07 09:37:53 +02:00
Muchun Song	6636109512	mm: memory_hotplug: make hugetlb_optimize_vmemmap compatible with memmap_on_memory ... For now, the feature of hugetlb_free_vmemmap is not compatible with the feature of memory_hotplug.memmap_on_memory, and hugetlb_free_vmemmap takes precedence over memory_hotplug.memmap_on_memory. However, someone wants to make memory_hotplug.memmap_on_memory takes precedence over hugetlb_free_vmemmap since memmap_on_memory makes it more likely to succeed memory hotplug in close-to-OOM situations. So the decision of making hugetlb_free_vmemmap take precedence is not wise and elegant. The proper approach is to have hugetlb_vmemmap.c do the check whether the section which the HugeTLB pages belong to can be optimized. If the section's vmemmap pages are allocated from the added memory block itself, hugetlb_free_vmemmap should refuse to optimize the vmemmap, otherwise, do the optimization. Then both kernel parameters are compatible. So this patch introduces VmemmapSelfHosted to mask any non-optimizable vmemmap pages. The hugetlb_vmemmap can use this flag to detect if a vmemmap page can be optimized. [songmuchun@bytedance.com: walk vmemmap page tables to avoid false-positive] Link: https://lkml.kernel.org/r/20220620110616.12056-3-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220617135650.74901-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Co-developed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-07-03 18:08:49 -07:00
Marc Zyngier	504ee23611	arm64: Add the arm64.nosve command line option ... In order to be able to completely disable SVE even if the HW seems to support it (most likely because the FW is broken), move the SVE setup into the EL2 finalisation block, and use a new idreg override to deal with it. Note that we also nuke id_aa64zfr0_el1 as a byproduct, and that SME also gets disabled, due to the dependency between the two features. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220630160500.1536744-9-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>	2022-07-01 15:22:52 +01:00
Marc Zyngier	b3000e2133	arm64: Add the arm64.nosme command line option ... In order to be able to completely disable SME even if the HW seems to support it (most likely because the FW is broken), move the SME setup into the EL2 finalisation block, and use a new idreg override to deal with it. Note that we also nuke id_aa64smfr0_el1 as a byproduct. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220630160500.1536744-8-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>	2022-07-01 15:22:52 +01:00
Christophe Leroy	56e54b4e6c	powerpc/32: Remove 'noltlbs' kernel parameter ... Mapping without large TLBs has no added value on the 8xx. Mapping without large TLBs is still necessary on 40x when selecting CONFIG_KFENCE or CONFIG_DEBUG_PAGEALLOC or CONFIG_STRICT_KERNEL_RWX, but this is done automatically and doesn't require user selection. Remove 'noltlbs' kernel parameter, the user has no reason to use it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/80ca17bd39cf608a8ebd0764d7064a498e131199.1655202721.git.christophe.leroy@csgroup.eu	2022-06-29 16:59:06 +10:00
Christophe Leroy	1ce844973b	powerpc/32: Remove the 'nobats' kernel parameter ... Mapping without BATs doesn't bring any added value to the user. Remove that option. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6977314c823cfb728bc0273cea634b41807bfb64.1655202721.git.christophe.leroy@csgroup.eu	2022-06-29 16:59:06 +10:00
Liu Song	e92b25731e	arm64: correct the effect of mitigations off on kpti ... If KASLR is enabled, then kpti will be forced to be enabled even if mitigations off, so we need to adjust the description of this parameter. Signed-off-by: Liu Song <liusong@linux.alibaba.com> Link: https://lore.kernel.org/r/1656033648-84181-1-git-send-email-liusong@linux.alibaba.com Signed-off-by: Will Deacon <will@kernel.org>	2022-06-28 15:08:01 +01:00
Mike Rapoport	ee65728e10	docs: rename Documentation/vm to Documentation/mm ... so it will be consistent with code mm directory and with Documentation/admin-guide/mm and won't be confused with virtual machines. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Tested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Wu XiangCheng <bobwxc@email.cn>	2022-06-27 12:52:53 -07:00
Peter Zijlstra	3ebc170068	x86/bugs: Add retbleed=ibpb ... jmp2ret mitigates the easy-to-attack case at relatively low overhead. It mitigates the long speculation windows after a mispredicted RET, but it does not mitigate the short speculation window from arbitrary instruction boundaries. On Zen2, there is a chicken bit which needs setting, which mitigates "arbitrary instruction boundaries" down to just "basic block boundaries". But there is no fix for the short speculation window on basic block boundaries, other than to flush the entire BTB to evict all attacker predictions. On the spectrum of "fast & blurry" -> "safe", there is (on top of STIBP or no-SMT): 1) Nothing System wide open 2) jmp2ret May stop a script kiddy 3) jmp2ret+chickenbit Raises the bar rather further 4) IBPB Only thing which can count as "safe". Tentative numbers put IBPB-on-entry at a 2.5x hit on Zen2, and a 10x hit on Zen1 according to lmbench. [ bp: Fixup feature bit comments, document option, 32-bit build fix. ] Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>	2022-06-27 10:34:00 +02:00
Pawan Gupta	7c693f54c8	x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS ... Extend spectre_v2= boot option with Kernel IBRS. [jpoimboe: no STIBP with IBRS] Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>	2022-06-27 10:33:59 +02:00
Kim Phillips	e8ec1b6e08	x86/bugs: Enable STIBP for JMP2RET ... For untrained return thunks to be fully effective, STIBP must be enabled or SMT disabled. Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de>	2022-06-27 10:33:59 +02:00
Alexandre Chartre	7fbf47c7ce	x86/bugs: Add AMD retbleed= boot parameter ... Add the "retbleed=<value>" boot parameter to select a mitigation for RETBleed. Possible values are "off", "auto" and "unret" (JMP2RET mitigation). The default value is "auto". Currently, "retbleed=auto" will select the unret mitigation on AMD and Hygon and no mitigation on Intel (JMP2RET is not effective on Intel). [peterz: rebase; add hygon] [jpoimboe: cleanups] Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>	2022-06-27 10:33:59 +02:00
David Matlack	ada51a9de7	KVM: x86/mmu: Extend Eager Page Splitting to nested MMUs ... Add support for Eager Page Splitting pages that are mapped by nested MMUs. Walk through the rmap first splitting all 1GiB pages to 2MiB pages, and then splitting all 2MiB pages to 4KiB pages. Note, Eager Page Splitting is limited to nested MMUs as a policy rather than due to any technical reason (the sp->role.guest_mode check could just be deleted and Eager Page Splitting would work correctly for all shadow MMU pages). There is really no reason to support Eager Page Splitting for tdp_mmu=N, since such support will eventually be phased out, and there is no current use case supporting Eager Page Splitting on hosts where TDP is either disabled or unavailable in hardware. Furthermore, future improvements to nested MMU scalability may diverge the code from the legacy shadow paging implementation. These improvements will be simpler to make if Eager Page Splitting does not have to worry about legacy shadow paging. Splitting huge pages mapped by nested MMUs requires dealing with some extra complexity beyond that of the TDP MMU: (1) The shadow MMU has a limit on the number of shadow pages that are allowed to be allocated. So, as a policy, Eager Page Splitting refuses to split if there are KVM_MIN_FREE_MMU_PAGES or fewer pages available. (2) Splitting a huge page may end up re-using an existing lower level shadow page tables. This is unlike the TDP MMU which always allocates new shadow page tables when splitting. (3) When installing the lower level SPTEs, they must be added to the rmap which may require allocating additional pte_list_desc structs. Case (2) is especially interesting since it may require a TLB flush, unlike the TDP MMU which can fully split huge pages without any TLB flushes. Specifically, an existing lower level page table may point to even lower level page tables that are not fully populated, effectively unmapping a portion of the huge page, which requires a flush. As of this commit, a flush is always done always after dropping the huge page and before installing the lower level page table. This TLB flush could instead be delayed until the MMU lock is about to be dropped, which would batch flushes for multiple splits. However these flushes should be rare in practice (a huge page must be aliased in multiple SPTEs and have been split for NX Huge Pages in only some of them). Flushing immediately is simpler to plumb and also reduces the chances of tripping over a CPU bug (e.g. see iTLB multihit). [ This commit is based off of the original implementation of Eager Page Splitting from Peter in Google's kernel from 2016. ] Suggested-by: Peter Feiner <pfeiner@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-23-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2022-06-24 04:52:00 -04:00
Paul E. McKenney	89f7f29140	doc: Document rcutree.nocb_nobypass_lim_per_jiffy kernel parameter ... This commit provides documentation for the kernel parameter controlling RCU's handling of callback floods on offloaded (rcu_nocbs) CPUs. This parameter might be obscure, but it is always there when you need it. Reported-by: Frederic Weisbecker <frederic@kernel.org> Reported-by: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>	2022-06-21 11:57:53 -07:00
Paul E. McKenney	71de1e34f1	doc: Document the rcutree.rcu_divisor kernel boot parameter ... This commit adds kernel-parameters.txt documentation for the rcutree.rcu_divisor kernel boot parameter, which controls the softirq callback-invocation batch limit. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>	2022-06-21 11:57:09 -07:00
Linus Torvalds	24625f7d91	ARM64: ... * Properly reset the SVE/SME flags on vcpu load * Fix a vgic-v2 regression regarding accessing the pending state of a HW interrupt from userspace (and make the code common with vgic-v3) * Fix access to the idreg range for protected guests * Ignore 'kvm-arm.mode=protected' when using VHE * Return an error from kvm_arch_init_vm() on allocation failure * A bunch of small cleanups (comments, annotations, indentation) RISC-V: * Typo fix in arch/riscv/kvm/vmid.c * Remove broken reference pattern from MAINTAINERS entry x86-64: * Fix error in page tables with MKTME enabled * Dirty page tracking performance test extended to running a nested guest * Disable APICv/AVIC in cases that it cannot implement correctly -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA== =h81Q -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "While last week's pull request contained miscellaneous fixes for x86, this one covers other architectures, selftests changes, and a bigger series for APIC virtualization bugs that were discovered during 5.20 development. The idea is to base 5.20 development for KVM on top of this tag. ARM64: - Properly reset the SVE/SME flags on vcpu load - Fix a vgic-v2 regression regarding accessing the pending state of a HW interrupt from userspace (and make the code common with vgic-v3) - Fix access to the idreg range for protected guests - Ignore 'kvm-arm.mode=protected' when using VHE - Return an error from kvm_arch_init_vm() on allocation failure - A bunch of small cleanups (comments, annotations, indentation) RISC-V: - Typo fix in arch/riscv/kvm/vmid.c - Remove broken reference pattern from MAINTAINERS entry x86-64: - Fix error in page tables with MKTME enabled - Dirty page tracking performance test extended to running a nested guest - Disable APICv/AVIC in cases that it cannot implement correctly" [ This merge also fixes a misplaced end parenthesis bug introduced in commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base") pointed out by Sean Christopherson ] Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/ * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits) KVM: selftests: Restrict test region to 48-bit physical addresses when using nested KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2 KVM: selftests: Clean up LIBKVM files in Makefile KVM: selftests: Link selftests directly with lib object files KVM: selftests: Drop unnecessary rule for STATIC_LIBS KVM: selftests: Add a helper to check EPT/VPID capabilities KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h KVM: selftests: Refactor nested_map() to specify target level KVM: selftests: Drop stale function parameter comment for nested_map() KVM: selftests: Add option to create 2M and 1G EPT mappings KVM: selftests: Replace x86_page_size with PG_LEVEL_XX KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking KVM: x86: disable preemption while updating apicv inhibition KVM: x86: SVM: fix avic_kick_target_vcpus_fast KVM: x86: SVM: remove avic's broken code that updated APIC ID KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base KVM: x86: document AVIC/APICv inhibit reasons KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs ...	2022-06-14 07:57:18 -07:00
Linus Torvalds	8e8afafb0b	Yet another hw vulnerability with a software mitigation: Processor MMIO ... Stale Data. They are a class of MMIO-related weaknesses which can expose stale data by propagating it into core fill buffers. Data which can then be leaked using the usual speculative execution methods. Mitigations include this set along with microcode updates and are similar to MDS and TAA vulnerabilities: VERW now clears those buffers too. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKXMkMTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoWGPD/idalLIhhV5F2+hZIKm0WSnsBxAOh9K 7y8xBxpQQ5FUfW3vm7Pg3ro6VJp7w2CzKoD4lGXzGHriusn3qst3vkza9Ay8xu8g RDwKe6hI+p+Il9BV9op3f8FiRLP9bcPMMReW/mRyYsOnJe59hVNwRAL8OG40PY4k hZgg4Psfvfx8bwiye5efjMSe4fXV7BUCkr601+8kVJoiaoszkux9mqP+cnnB5P3H zW1d1jx7d6eV1Y063h7WgiNqQRYv0bROZP5BJkufIoOHUXDpd65IRF3bDnCIvSEz KkMYJNXb3qh7EQeHS53NL+gz2EBQt+Tq1VH256qn6i3mcHs85HvC68gVrAkfVHJE QLJE3MoXWOqw+mhwzCRrEXN9O1lT/PqDWw8I4M/5KtGG/KnJs+bygmfKBbKjIVg4 2yQWfMmOgQsw3GWCRjgEli7aYbDJQjany0K/qZTq54I41gu+TV8YMccaWcXgDKrm cXFGUfOg4gBm4IRjJ/RJn+mUv6u+/3sLVqsaFTs9aiib1dpBSSUuMGBh548Ft7g2 5VbFVSDaLjB2BdlcG7enlsmtzw0ltNssmqg7jTK/L7XNVnvxwUoXw+zP7RmCLEYt UV4FHXraMKNt2ZketlomC8ui2hg73ylUp4pPdMXCp7PIXp9sVamRTbpz12h689VJ /s55bWxHkR6S =LBxT -----END PGP SIGNATURE----- Merge tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MMIO stale data fixes from Thomas Gleixner: "Yet another hw vulnerability with a software mitigation: Processor MMIO Stale Data. They are a class of MMIO-related weaknesses which can expose stale data by propagating it into core fill buffers. Data which can then be leaked using the usual speculative execution methods. Mitigations include this set along with microcode updates and are similar to MDS and TAA vulnerabilities: VERW now clears those buffers too" * tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mmio: Print SMT warning KVM: x86/speculation: Disable Fill buffer clear within guests x86/speculation/mmio: Reuse SRBDS mitigation for SBDS x86/speculation/srbds: Update SRBDS mitigation selection x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data x86/speculation/mmio: Enable CPU Fill buffer clearing on idle x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data x86/speculation: Add a common function for MD_CLEAR mitigation update x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug Documentation: Add documentation for Processor MMIO Stale Data	2022-06-14 07:43:15 -07:00
Randy Dunlap	8d6d51edcb	docs: selinux: add '=' signs to kernel boot options ... Provide the full kernel boot option string (with ending '=' sign). They won't work without that and that is how other boot options are listed. If used without an '=' sign (as listed here), they cause an "Unknown parameters" message and are added to init's argument strings, polluting them. Unknown kernel command line parameters "enforcing checkreqprot BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init enforcing checkreqprot with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Paris <eparis@parisplace.org> Cc: selinux@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> [PM: removed bogus 'Fixes' line] Signed-off-by: Paul Moore <paul@paul-moore.com>	2022-06-13 14:59:53 -04:00
Will Deacon	cde5042adf	KVM: arm64: Ignore 'kvm-arm.mode=protected' when using VHE ... Ignore 'kvm-arm.mode=protected' when using VHE so that kvm_get_mode() only returns KVM_MODE_PROTECTED on systems where the feature is available. Cc: David Brazdil <dbrazdil@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-4-will@kernel.org	2022-06-09 13:24:02 +01:00
Linus Torvalds	500a434fc5	Driver core changes for 5.19-rc1 ... Here is the set of driver core changes for 5.19-rc1. Note, I'm not really happy with this pull request as-is, see below for details, but overall this is all good for everything but a small set of systems, which we have a fix for already. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things were: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes included: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request if you want to take them directly, _OR_ I can just revert the probe timeout changes and they can wait for the next -rc1 merge cycle. Given that the fixes are tested, and pretty simple, I'm leaning toward that choice. Sorry this all came at the end of the merge window, I should have resolved this all 2 weeks ago, that's my fault as it was in the middle of some travel for me. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time outs. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai GkjLXBGNWOPBa5cU52qf =yEi/ -----END PGP SIGNATURE----- Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...	2022-06-03 11:48:47 -07:00
Linus Torvalds	3cc30140db	pci-v5.19-changes ... -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmKP/tQUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vzH0xAAojQowrSWzZ5FKTqI+L/L9ZXoAb+e 9IvQljKc9taJldmXp+EB9wkS/5B+VtQcC2qUQuWEQXUoECF8qHlcB4l+XQyd1tWO O0vZxETH22xjLLrjG2F3l5rrfkJZAf2nEugwbDk97YEgiimeOiRcv3bx6AUCtj6I rPJ13Fop3Jke7sQMcXYJe3gQLT1o1AKiQGghiCFNi/gzx2lXI6mmHBgLxFoiqcby WpfXbvbJti95HRaahUR3HaDFfHj4HVkQNLlTtIykJ3Tl2/rOhWEJjI8JOIQpAA+M WBrWw9rfgbScTiGV+dZ3h7hKiPnHKl9YETIX7L0oA2sj0jZcIs0d6mSBZx0kYuI9 eAlx+qSK9xpbQQr/fdYaUdF1q4QdtU0BYOvOWOzWsqYCECMRJ1PUHFSMbmR/+PNB P5lHnAbggRSoxdAtwFYv1HTr+VpGH9S+5oxHCz3ohpMjYy6mkCZwHpZn3doaU3ci KG6yIoVKftm3fZdtFvL03qHl/I8+X24ZhT/T/278PRGjkhSyr56hZo8hg0gqqTct ngip8qNABmSbqpr73/W6Vl42zAbYtNk1BykYahbKupgW8FbT7hqaZTB05V87pVu+ Ko1aJM6VoOP9rMlKHI9ba8eYCzDrZbLZUFn7ljNPDpzutf0tAwtgwzvZBXN3za6+ Z9+D5dxmvrZEIbA= =hEti -----END PGP SIGNATURE----- Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas) - Log E820 clipping better (Bjorn Helgaas) - Add kernel cmdline options to enable/disable E820 clipping (Hans de Goede) - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no usable address space for touchpads, Thunderbolt devices, etc (Hans de Goede) - Disable E820 clipping by default starting in 2023 (Hans de Goede) PCI device hotplug: - Include files to remove implicit dependencies (Christophe Leroy) - Only put Root Ports in D3 if they can signal and wake from D3 so AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello) Power management: - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since it's unused otherwise (Krzysztof Kozlowski) - Power up devices completely, including anything platform firmware needs to do, during runtime resume (Rafael J. Wysocki) - Move pci_resume_bus() to PM callbacks so we observe the required bridge power-up delays (Rafael J. Wysocki) - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki) - Split pci_raw_set_power_state() between pci_power_up() and a new pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if config read returns ~0, indicating the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() so BARs and ASPM config are restored correctly (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split pci_power_up() to pci_set_full_power_state() to avoid some redundant operations (Rafael J. Wysocki) - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki) - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki) - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J. Wysocki) Virtualization: - Acquire device lock before config space access lock to avoid AB/BA deadlock with sriov_numvfs_store() (Yicong Yang) Error handling: - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously leave permanently set (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Whitelist Intel Skylake-E Root Ports regardless of which devfn they are (Shlomo Pongratz) ASPM: - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1 can be enabled (Mika Westerberg) Cadence PCIe controller driver: - Set up device-specific register to allow PTM Responder to be enabled by the normal architected bit (Christian Gmeiner) - Override advertised FLR support since the controller doesn't implement FLR correctly (Parshuram Thombare) Cadence PCIe endpoint driver: - Correct bitmap size for the ob_region_map of outbound window usage (Dan Carpenter) Freescale i.MX6 PCIe controller driver: - Fix PERST# assertion/deassertion so we observe the required delays before accessing device (Francesco Dolcini) Freescale Layerscape PCIe controller driver: - Add "big-endian" DT property (Hou Zhiqiang) - Update SCFG DT property (Hou Zhiqiang) - Add "aer", "pme", "intr" DT properties (Li Yang) - Add DT compatible strings for ls1028a (Xiaowei Bao) Intel VMD host bridge driver: - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) Marvell MVEBU PCIe controller driver: - Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) MediaTek PCIe controller driver: - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) MediaTek PCIe Gen3 controller driver: - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) NVIDIA Tegra194 PCIe controller driver: - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) Qualcomm PCIe controller driver: - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) Rockchip PCIe controller driver: - Fix bitmap size when searching for free outbound region (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) Synopsys DesignWare PCIe controller driver: - Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) Miscellaneous: - Change pci_set_dma_mask() documentation references to dma_set_mask() (Alex Williamson)" * tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits) dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC x86/PCI: Disable E820 reserved region clipping starting in 2023 x86/PCI: Disable E820 reserved region clipping via quirks x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions PCI: microchip: Fix potential race in interrupt handling PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: vmd: Revert 2565e5b69c ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() PCI: rockchip-dwc: Add legacy interrupt support ...	2022-05-27 15:25:10 -07:00
Linus Torvalds	98931dd95f	Yang Shi has improved the behaviour of khugepaged collapsing of readonly ... file-backed transparent hugepages. Johannes Weiner has arranged for zswap memory use to be tracked and managed on a per-cgroup basis. Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime enablement of the recent huge page vmemmap optimization feature. Baolin Wang contributes a series to fix some issues around hugetlb pagetable invalidation. Zhenwei Pi has fixed some interactions between hwpoisoned pages and virtualization. Tong Tiangen has enabled the use of the presently x86-only page_table_check debugging feature on arm64 and riscv. David Vernet has done some fixup work on the memcg selftests. Peter Xu has taught userfaultfd to handle write protection faults against shmem- and hugetlbfs-backed files. More DAMON development from SeongJae Park - adding online tuning of the feature and support for monitoring of fixed virtual address ranges. Also easier discovery of which monitoring operations are available. Nadav Amit has done some optimization of TLB flushing during mprotect(). Neil Brown continues to labor away at improving our swap-over-NFS support. David Hildenbrand has some fixes to anon page COWing versus get_user_pages(). Peng Liu fixed some errors in the core hugetlb code. Joao Martins has reduced the amount of memory consumed by device-dax's compound devmaps. Some cleanups of the arch-specific pagemap code from Anshuman Khandual. Muchun Song has found and fixed some errors in the TLB flushing of transparent hugepages. Roman Gushchin has done more work on the memcg selftests. And, of course, many smaller fixes and cleanups. Notably, the customary million cleanup serieses from Miaohe Lin. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8= =nFe6 -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Almost all of MM here. A few things are still getting finished off, reviewed, etc. - Yang Shi has improved the behaviour of khugepaged collapsing of readonly file-backed transparent hugepages. - Johannes Weiner has arranged for zswap memory use to be tracked and managed on a per-cgroup basis. - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime enablement of the recent huge page vmemmap optimization feature. - Baolin Wang contributes a series to fix some issues around hugetlb pagetable invalidation. - Zhenwei Pi has fixed some interactions between hwpoisoned pages and virtualization. - Tong Tiangen has enabled the use of the presently x86-only page_table_check debugging feature on arm64 and riscv. - David Vernet has done some fixup work on the memcg selftests. - Peter Xu has taught userfaultfd to handle write protection faults against shmem- and hugetlbfs-backed files. - More DAMON development from SeongJae Park - adding online tuning of the feature and support for monitoring of fixed virtual address ranges. Also easier discovery of which monitoring operations are available. - Nadav Amit has done some optimization of TLB flushing during mprotect(). - Neil Brown continues to labor away at improving our swap-over-NFS support. - David Hildenbrand has some fixes to anon page COWing versus get_user_pages(). - Peng Liu fixed some errors in the core hugetlb code. - Joao Martins has reduced the amount of memory consumed by device-dax's compound devmaps. - Some cleanups of the arch-specific pagemap code from Anshuman Khandual. - Muchun Song has found and fixed some errors in the TLB flushing of transparent hugepages. - Roman Gushchin has done more work on the memcg selftests. ... and, of course, many smaller fixes and cleanups. Notably, the customary million cleanup serieses from Miaohe Lin" * tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits) mm: kfence: use PAGE_ALIGNED helper selftests: vm: add the "settings" file with timeout variable selftests: vm: add "test_hmm.sh" to TEST_FILES selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests selftests: vm: add migration to the .gitignore selftests/vm/pkeys: fix typo in comment ksm: fix typo in comment selftests: vm: add process_mrelease tests Revert "mm/vmscan: never demote for memcg reclaim" mm/kfence: print disabling or re-enabling message include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace" include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion" mm: fix a potential infinite loop in start_isolate_page_range() MAINTAINERS: add Muchun as co-maintainer for HugeTLB zram: fix Kconfig dependency warning mm/shmem: fix shmem folio swapoff hang cgroup: fix an error handling path in alloc_pagecache_max_30M() mm: damon: use HPAGE_PMD_SIZE tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate nodemask.h: fix compilation error with GCC12 ...	2022-05-26 12:32:41 -07:00
Linus Torvalds	88a618920e	It was a moderately busy cycle for documentation; highlights include: ... - After a long period of inactivity, the Japanese translations are seeing some much-needed maintenance and updating. - Reworked IOMMU documentation - Some new documentation for static-analysis tools - A new overall structure for the memory-management documentation. This is an LSFMM outcome that, it is hoped, will help encourage developers to fill in the many gaps. Optimism is eternal...but hopefully it will work. - More Chinese translations. Plus the usual typo fixes, updates, etc. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmKLqZQPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YdgQH/2/9+EgQDes93f/+iKtbO23EV67392dwrmXS kYg8lR4948/Q3jzgMloUo6hNOoxXeV/sqmdHu0LjUhFN+BGsp9fFjd/jp0XhWcqA nnc9foGbpmeFPxHeAg2aqV84eeasLoO5lUUm2rNoPBLd6HFV+IYC5R4VZ+w42StB 5bYEOYwHXMvQZXkivZDse82YmvQK3/2rRGTUoFhME/Aap6rFgWJJ+XQcSKA7WmwW OpJqq+FOsjsxHe6IFVy6onzlqgGJM8zM2bLtqedid6yaE3uACcHMb/OyAjp0rdKF BQvaG+d3f7DugABqM6Y1oU75iBtJWWYgGeAm36JtX+3mz2uR/f0= =3UoR -----END PGP SIGNATURE----- Merge tag 'docs-5.19' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "It was a moderately busy cycle for documentation; highlights include: - After a long period of inactivity, the Japanese translations are seeing some much-needed maintenance and updating. - Reworked IOMMU documentation - Some new documentation for static-analysis tools - A new overall structure for the memory-management documentation. This is an LSFMM outcome that, it is hoped, will help encourage developers to fill in the many gaps. Optimism is eternal...but hopefully it will work. - More Chinese translations. Plus the usual typo fixes, updates, etc" * tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits) docs: pdfdocs: Add space for chapter counts >= 100 in TOC docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation input: Docs: correct ntrig.rst typo input: Docs: correct atarikbd.rst typos MAINTAINERS: Become the docs/zh_CN maintainer docs/zh_CN: fix devicetree usage-model translation mm,doc: Add new documentation structure Documentation: drop more IDE boot options and ide-cd.rst Documentation/process: use scripts/get_maintainer.pl on patches MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE docs/trans/ja_JP/howto: Don't mention specific kernel versions docs/ja_JP/SubmittingPatches: Request summaries for commit references docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature docs/ja_JP/SubmittingPatches: Randy has moved docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl docs/ja_JP/SubmittingPatches: Update GregKH links Documentation/sysctl: document max_rcu_stall_to_panic Documentation: add missing angle bracket in cgroup-v2 doc Documentation: dev-tools: use literal block instead of code-block docs/zh_CN: add vm numa translation ...	2022-05-25 11:17:41 -07:00
Linus Torvalds	0350785b0a	integrity-v5.19 ... -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYo0tOhQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5QJfAP47Ym9vacLc1m8/MUaRA/QjbJ/8t3TX h/4McK8kiRudxgD/RiPHII6gJ8q+qpBrYWJZ4ZZaHE8v0oA1viuZfbuN2wc= =KQYi -----END PGP SIGNATURE----- Merge tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA updates from Mimi Zohar: "New is IMA support for including fs-verity file digests and signatures in the IMA measurement list as well as verifying the fs-verity file digest based signatures, both based on policy. In addition, are two bug fixes: - avoid reading UEFI variables, which cause a page fault, on Apple Macs with T2 chips. - remove the original "ima" template Kconfig option to address a boot command line ordering issue. The rest is a mixture of code/documentation cleanup" * tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: Fix sparse warnings in keyring_handler evm: Clean up some variables evm: Return INTEGRITY_PASS for enum integrity_status value '0' efi: Do not import certificates from UEFI Secure Boot for T2 Macs fsverity: update the documentation ima: support fs-verity file digest based version 3 signatures ima: permit fsverity's file digests in the IMA measurement list ima: define a new template field named 'd-ngv2' and templates fs-verity: define a function to return the integrity protected file digest ima: use IMA default hash algorithm for integrity violations ima: fix 'd-ng' comments and documentation ima: remove the IMA_TEMPLATE Kconfig option ima: remove redundant initialization of pointer 'file'.	2022-05-24 13:50:39 -07:00
Linus Torvalds	7cf6a8a17f	tpmdd updates for v5.19-rc1 ... - Strictened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> -----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYoux6xIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9LTQgEA4zRrlmLPjhZ1iZpPZiyBBv5eOx20/c+y R7tCfJFB2+ABAOT1E885vt+GgKTY4mYloHJ+ZtnTIf1QRMP6EoSX+TwP =oBOO -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: - Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. * tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: MAINTAINERS: add KEYS-TRUSTED-CAAM doc: trusted-encrypted: describe new CAAM trust source KEYS: trusted: Introduce support for NXP CAAM-based trusted keys crypto: caam - add in-kernel interface for blob generator crypto: caam - determine whether CAAM supports blob encap/decap KEYS: trusted: allow use of kernel RNG for key material KEYS: trusted: allow use of TEE as backend without TCG_TPM support tpm: Add field upgrade mode support for Infineon TPM2 modules tpm: Fix buffer access in tpm2_get_tpm_pt() char: tpm: cr50_i2c: Suppress duplicated error message in .remove() tpm: cr50: Add new device/vendor ID 0x504a6666 tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe() tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions certs: Explain the rationale to call panic() certs: Allow root user to append signed hashes to the blacklist keyring certs: Check that builtin blacklist hashes are valid certs: Make blacklist_vet_description() more strict certs: Factor out the blacklist hash creation tools/certs: Add print-cert-tbs-hash.sh	2022-05-24 13:16:50 -07:00
Linus Torvalds	143a6252e1	arm64 updates for 5.19: ... - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmKH19IACgkQa9axLQDI XvEFWg//bf0p6zjeNaOJmBbyVFsXsVyYiEaLUpFPUs3oB+81s2YZ+9i1rgMrNCft EIDQ9+/HgScKxJxnzWf68heMdcBDbk76VJtLALExbge6owFsjByQDyfb/b3v/bLd ezAcGzc6G5/FlI1IP7ct4Z9MnQry4v5AG8lMNAHjnf6GlBS/tYNAqpmj8HpQfgRQ ZbhfZ8Ayu3TRSLWL39NHVevpmxQm/bGcpP3Q9TtjUqg0r1FQ5sK/LCqOksueIAzT UOgUVYWSFwTpLEqbYitVqgERQp9LiLoK5RmNYCIEydfGM7+qmgoxofSq5e2hQtH2 SZM1XilzsZctRbBbhMit1qDBqMlr/XAy/R5FO0GauETVKTaBhgtj6mZGyeC9nU/+ RGDljaArbrOzRwMtSuXF+Fp6uVo5spyRn1m8UT/k19lUTdrV9z6EX5Fzuc4Mnhed oz4iokbl/n8pDObXKauQspPA46QpxUYhrAs10B/ELc3yyp/Qj3jOfzYHKDNFCUOq HC9mU+YiO9g2TbYgCrrFM6Dah2E8fU6/cR0ZPMeMgWK4tKa+6JMEINYEwak9e7M+ 8lZnvu3ntxiJLN+PrPkiPyG+XBh2sux1UfvNQ+nw4Oi9xaydeX7PCbQVWmzTFmHD q7UPQ8220e2JNCha9pULS8cxDLxiSksce06DQrGXwnHc1Ir7T04= =0DjE -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits) arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Move sve_free() into SVE code section arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: kdump: Do not allocate crash low memory if not needed arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR ...	2022-05-23 21:06:11 -07:00
Linus Torvalds	a13dc4d409	- Serious sanitization and cleanup of the whole APERF/MPERF and ... frequency invariance code along with removing the need for unnecessary IPIs - Finally remove a.out support - The usual trivial cleanups and fixes all over x86 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLn48ACgkQEsHwGGHe VUpbkg/+PELrc0y/qxLM/+dyftKYY16Rhk6ZVAXfwqlh5ldyVQcLMUgKwDqYyTn2 XmgdI3cTcFlH2K7j6ANWLu0I9NPaviimUcEdMVcXt7aY5mGWk/q4hIyCYM8d41sV qKx4OjNSdyoofG6MtwFLJDuoeVg99Bqgvm4nP9BuxL0dZJ2hfcUZ7MTxYCx9ZYjK /3trx0NV287Yg/wm91EU0nLQzy9xbGS7WCmMnse6uxiUdm2vXbBt8oNFF4f747Dj 0cArfNrMgYq4Cv5bgt/Ki0NU/n4EOGDpJUSyQwlnjDKeN81ESPy7IWtTQ6cE/rJK BZeUIPiGiYHwtqXv0UTAPGLG8cAqKeab8u0xAOyrFVDkTc0+WlPJRsUAOmRRGIGE M8ZjoxrLeuFgxw6vKpVjaA+mDRj3qEpSH+IrTcekS98PN7gmVzvq03GobgGbT7YB xmtbThJa+514FfUVckkyC0+A56BknUIgVxwFPqrthE2atzYTbH67hW4U0yVWXXr7 2VI7ttozBrYVgHCWhD9eoT0uhyD74Vl6pqHnqzY9ShIfKVUGvMgKHHg04nLLtF7W hm87xV3Q5UEmXhTmDzT1rUZ99mBUxGbWxk227I9raMugIh7pp9wIr57+7O0LRYfX TdnE2+tL8RMi7+XzRH5iLhnwkrvahBESeHSQ7GVI1Y2zMmmFN+0= =Dks/ -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: - Serious sanitization and cleanup of the whole APERF/MPERF and frequency invariance code along with removing the need for unnecessary IPIs - Finally remove a.out support - The usual trivial cleanups and fixes all over x86 * tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86: Remove empty files x86/speculation: Add missing srbds=off to the mitigations= help text x86/prctl: Remove pointless task argument x86/aperfperf: Make it correct on 32bit and UP kernels x86/aperfmperf: Integrate the fallback code from show_cpuinfo() x86/aperfmperf: Replace arch_freq_get_on_cpu() x86/aperfmperf: Replace aperfmperf_get_khz() x86/aperfmperf: Store aperf/mperf data for cpu frequency reads x86/aperfmperf: Make parts of the frequency invariance code unconditional x86/aperfmperf: Restructure arch_scale_freq_tick() x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct x86/aperfmperf: Untangle Intel and AMD frequency invariance init x86/aperfmperf: Separate AP/BP frequency invariance init x86/smp: Move APERF/MPERF code where it belongs x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu() x86/process: Fix kernel-doc warning due to a changed function name x86: Remove a.out support x86/mm: Replace nodes_weight() with nodes_empty() where appropriate x86: Replace cpumask_weight() with cpumask_empty() where appropriate x86/pkeys: Remove __arch_set_user_pkey_access() declaration ...	2022-05-23 18:17:09 -07:00
Linus Torvalds	c5a3d3c01e	- Remove a bunch of chicken bit options to turn off CPU features which ... are not really needed anymore - Misc fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLdfgACgkQEsHwGGHe VUpB5Q//TIGVgmnSd0YYxY2cIe047lfcd34D+3oEGk0d2FidtirP/tjgBqIXRuY5 UncoveqBuI/6/7bodP/ANg9DNVXv2489eFYyZtEOLSGnfzV2AU10aw95cuQQG+BW YIc6bGSsgfiNo8Vtj4L3xkVqxOrqaCYnh74GTSNNANht3i8KH8Qq9n3qZTuMiF6R fH9xWak3TZB2nMzHdYrXh0sSR6eBHN3KYSiT0DsdlU9PUlavlSPFYQRiAlr6FL6J BuYQdlUaCQbINvaviGW4SG7fhX32RfF/GUNaBajB40TO6H98KZLpBBvstWQ841xd /o44o5wbghoGP1ne8OKwP+SaAV2bE6twd5eO1lpwcpXnQfATvjQ2imxvOiRhy5LY pFPt/hko9gKWJ6SI0SQ4tiKJALFPLWD6561scHU6PoriFhv0SRIaPmJyEsDYynMz bCXaPPsoovRwwwBfAxxQjljIlhQSBVt3gWZ8NWD1tYbNaqM+WK7xKBaONGh3OCw3 iK7lsbbljtM0zmANImYyeo7+Hr1NVOmMiK2WZYbxhxgzH3l8v/6EbDt3I70WU57V 9apCU3/nk/HFpX65SdW5qmuiWLVdH9NXrEqbvaUB4ApT18MdUUugewBhcGnf3Umu wEtltzziqcIkxzDoXXpBGWpX31S7PsM2XVDqYC7dwuNttgEw2Fc= =7AUX -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CPU feature updates from Borislav Petkov: - Remove a bunch of chicken bit options to turn off CPU features which are not really needed anymore - Misc fixes and cleanups * tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Add missing prototype for unpriv_ebpf_notify() x86/pm: Fix false positive kmemleak report in msr_build_context() x86/speculation/srbds: Do not try to turn mitigation off when not supported x86/cpu: Remove "noclflush" x86/cpu: Remove "noexec" x86/cpu: Remove "nosmep" x86/cpu: Remove CONFIG_X86_SMAP and "nosmap" x86/cpu: Remove "nosep" x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=	2022-05-23 18:01:31 -07:00
Linus Torvalds	eb39e37d5c	AMD SEV-SNP support ... Add to confidential guests the necessary memory integrity protection against malicious hypervisor-based attacks like data replay, memory remapping and others, thus achieving a stronger isolation from the hypervisor. At the core of the functionality is a new structure called a reverse map table (RMP) with which the guest has a say in which pages get assigned to it and gets notified when a page which it owns, gets accessed/modified under the covers so that the guest can take an appropriate action. In addition, add support for the whole machinery needed to launch a SNP guest, details of which is properly explained in each patch. And last but not least, the series refactors and improves parts of the previous SEV support so that the new code is accomodated properly and not just bolted on. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLU2AACgkQEsHwGGHe VUpb/Q//f4LGiJf4nw1flzpe90uIsHNwAafng3NOjeXmhI/EcOlqPf23WHPCgg3Z 2umfa4sRZyj4aZubDd7tYAoq4qWrQ7pO7viWCNTh0InxBAILOoMPMuq2jSAbq0zV ASUJXeQ2bqjYxX4JV4N5f3HT2l+k68M0mpGLN0H+O+LV9pFS7dz7Jnsg+gW4ZP25 PMPLf6FNzO/1tU1aoYu80YDP1ne4eReLrNzA7Y/rx+S2NAetNwPn21AALVgoD4Nu vFdKh4MHgtVbwaQuh0csb/+4vD+tDXAhc8lbIl+Abl9ZxJaDWtAJW5D9e2CnsHk1 NOkHwnrzizzhtGK1g56YPUVRFAWhZYMOI1hR0zGPLQaVqBnN4b+iahPeRiV0XnGE PSbIHSfJdeiCkvLMCdIAmpE5mRshhRSUfl1CXTCdetMn8xV/qz/vG6bXssf8yhTV cfLGPHU7gfVmsbR9nk5a8KZ78PaytxOxfIDXvCy8JfQwlIWtieaCcjncrj+sdMJy 0fdOuwvi4jma0cyYuPolKiS1Hn4ldeibvxXT7CZQlIx6jZShMbpfpTTJs11XdtHm PdDAc1TY3AqI33mpy9DhDQmx/+EhOGxY3HNLT7evRhv4CfdQeK3cPVUWgo4bGNVv ZnFz7nvmwpyufltW9K8mhEZV267174jXGl6/idxybnlVE7ESr2Y= =Y8kW -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull AMD SEV-SNP support from Borislav Petkov: "The third AMD confidential computing feature called Secure Nested Paging. Add to confidential guests the necessary memory integrity protection against malicious hypervisor-based attacks like data replay, memory remapping and others, thus achieving a stronger isolation from the hypervisor. At the core of the functionality is a new structure called a reverse map table (RMP) with which the guest has a say in which pages get assigned to it and gets notified when a page which it owns, gets accessed/modified under the covers so that the guest can take an appropriate action. In addition, add support for the whole machinery needed to launch a SNP guest, details of which is properly explained in each patch. And last but not least, the series refactors and improves parts of the previous SEV support so that the new code is accomodated properly and not just bolted on" * tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/entry: Fixup objtool/ibt validation x86/sev: Mark the code returning to user space as syscall gap x86/sev: Annotate stack change in the #VC handler x86/sev: Remove duplicated assignment to variable info x86/sev: Fix address space sparse warning x86/sev: Get the AP jump table address from secrets page x86/sev: Add missing __init annotations to SEV init routines virt: sevguest: Rename the sevguest dir and files to sev-guest virt: sevguest: Change driver name to reflect generic SEV support x86/boot: Put globals that are accessed early into the .data section x86/boot: Add an efi.h header for the decompressor virt: sevguest: Fix bool function returning negative value virt: sevguest: Fix return value check in alloc_shared_pages() x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate() virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement virt: sevguest: Add support to get extended report virt: sevguest: Add support to derive key virt: Add SEV-SNP guest driver x86/sev: Register SEV-SNP guest request platform device x86/sev: Provide support for SNP guest request NAEs ...	2022-05-23 17:38:01 -07:00
Linus Torvalds	8a32f81a89	ata changes for 5.19-rc1 ... For this cycle, the libata.force kernel parameter changes stand out. Beside that, some small cleanups in various drivers. In more details: * Changes to the pata_mpc52xx driver in preparation for powerpc's asm/prom.h cleanup, from Christophe. * Improved ATA command allocation, from John. * Various small cleanups to the pata_via, pata_sil680, pata_ftide010, sata_gemini, ahci_brcm drivers and to libata-core, from Sergey, Diego, Ruyi, Mighao and Jiabing. * Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad. * AHCI RAID ID cleanup, from Dan. * Improvement to the libata.force kernel parameter to allow most horkage flags to be manually forced for debugging drive issues in the field without needing recompiling a kernel, from me. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYosMtQAKCRDdoc3SxdoY dhi6APsGXkkiaTheBeshjhPZiet80iEh4gJknp5QwgJ6QovjDwEAzjApUC0S1sq2 atD4Y7T6HnKQBp66lJHvvgbFuHlxMgg= =YuEq -----END PGP SIGNATURE----- Merge tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: "For this cycle, the libata.force kernel parameter changes stand out. Beside that, some small cleanups in various drivers. In more detail: - Changes to the pata_mpc52xx driver in preparation for powerpc's asm/prom.h cleanup, from Christophe. - Improved ATA command allocation, from John. - Various small cleanups to the pata_via, pata_sil680, pata_ftide010, sata_gemini, ahci_brcm drivers and to libata-core, from Sergey, Diego, Ruyi, Mighao and Jiabing. - Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad. - AHCI RAID ID cleanup, from Dan. - Improvement to the libata.force kernel parameter to allow most horkage flags to be manually forced for debugging drive issues in the field without needing recompiling a kernel, from me" * tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepare doc: admin-guide: Update libata kernel parameters ata: libata-core: Allow forcing most horkage flags ata: libata-core: Improve link flags forced settings ata: libata-core: Refactor force_tbl definition ata: libata-core: cleanup ata_device_blacklist ata: simplify the return expression of brcm_ahci_remove ata: Make use of the helper function devm_platform_ioremap_resource() ata: libata-core: replace "its" with "it is" ahci: Add a generic 'controller2' RAID id dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support ata: pata_via: fix sloppy typing in via_do_set_mode() ata: pata_sil680: fix result type of sil680_sel{dev|reg}() ata: libata-core: fix parameter type in ata_xfer_mode2shift() libata: Improve ATA queued command allocation ata: pata_mpc52xx: Prepare cleanup of powerpc's asm/prom.h	2022-05-23 14:14:50 -07:00
Ahmad Fatoum	e9c5048c2d	KEYS: trusted: Introduce support for NXP CAAM-based trusted keys ... The Cryptographic Acceleration and Assurance Module (CAAM) is an IP core built into many newer i.MX and QorIQ SoCs by NXP. The CAAM does crypto acceleration, hardware number generation and has a blob mechanism for encapsulation/decapsulation of sensitive material. This blob mechanism depends on a device specific random 256-bit One Time Programmable Master Key that is fused in each SoC at manufacturing time. This key is unreadable and can only be used by the CAAM for AES encryption/decryption of user data. This makes it a suitable backend (source) for kernel trusted keys. Previous commits generalized trusted keys to support multiple backends and added an API to access the CAAM blob mechanism. Based on these, provide the necessary glue to use the CAAM for trusted keys. Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>	2022-05-23 18:47:50 +03:00
Ahmad Fatoum	fcd7c26901	KEYS: trusted: allow use of kernel RNG for key material ... The two existing trusted key sources don't make use of the kernel RNG, but instead let the hardware doing the sealing/unsealing also generate the random key material. However, both users and future backends may want to place less trust into the quality of the trust source's random number generator and instead reuse the kernel entropy pool, which can be seeded from multiple entropy sources. Make this possible by adding a new trusted.rng parameter, that will force use of the kernel RNG. In its absence, it's up to the trust source to decide, which random numbers to use, maintaining the existing behavior. Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>	2022-05-23 18:47:50 +03:00
Pawan Gupta	8cb861e9e3	x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data ... Processor MMIO Stale Data is a class of vulnerabilities that may expose data after an MMIO operation. For details please refer to Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst. These vulnerabilities are broadly categorized as: Device Register Partial Write (DRPW): Some endpoint MMIO registers incorrectly handle writes that are smaller than the register size. Instead of aborting the write or only copying the correct subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than specified by the write transaction may be written to the register. On some processors, this may expose stale data from the fill buffers of the core that created the write transaction. Shared Buffers Data Sampling (SBDS): After propagators may have moved data around the uncore and copied stale data into client core fill buffers, processors affected by MFBDS can leak data from the fill buffer. Shared Buffers Data Read (SBDR): It is similar to Shared Buffer Data Sampling (SBDS) except that the data is directly read into the architectural software-visible state. An attacker can use these vulnerabilities to extract data from CPU fill buffers using MDS and TAA methods. Mitigate it by clearing the CPU fill buffers using the VERW instruction before returning to a user or a guest. On CPUs not affected by MDS and TAA, user application cannot sample data from CPU fill buffers using MDS or TAA. A guest with MMIO access can still use DRPW or SBDR to extract data architecturally. Mitigate it with VERW instruction to clear fill buffers before VMENTER for MMIO capable guests. Add a kernel parameter mmio_stale_data={off|full|full,nosmt} to control the mitigation. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>	2022-05-21 12:14:52 +02:00
Hans de Goede	fa6dae5d82	x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions ... Some firmware supplies PCI host bridge _CRS that includes address space unusable by PCI devices, e.g., space occupied by host bridge registers or used by hidden PCI devices. To avoid this unusable space, Linux currently excludes E820 reserved regions from _CRS windows; see 4dc2287c18 ("x86: avoid E820 regions when allocating address space"). However, this use of E820 reserved regions to clip things out of _CRS is not supported by ACPI, UEFI, or PCI Firmware specs, and some systems have E820 reserved regions that cover the entire memory window from _CRS. 4dc2287c18 clips the entire window, leaving no space for hot-added or uninitialized PCI devices. For example, from a Lenovo IdeaPad 3 15IIL 81WE: BIOS-e820: [mem 0x4bc50000-0xcfffffff] reserved pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] pci 0000:00:15.0: BAR 0: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.0: BAR 0: no space for [mem size 0x00001000 64bit] Future patches will add quirks to enable/disable E820 clipping automatically. Add a "pci=no_e820" kernel command line option to disable clipping with E820 reserved regions. Also add a matching "pci=use_e820" option to enable clipping with E820 reserved regions if that has been disabled by default by further patches in this patch-set. Both options taint the kernel because they are intended for debugging and workaround purposes until a quirk can set them automatically. [bhelgaas: commit log, add printk] Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Lenovo IdeaPad 3 Link: https://lore.kernel.org/r/20220519152150.6135-2-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Benoit Grégoire <benoitg@coeus.ca> Cc: Hui Wang <hui.wang@canonical.com>	2022-05-19 14:26:55 -05:00
Saravana Kannan	2b28a1a84a	driver core: Extend deferred probe timeout on driver registration ... The deferred probe timer that's used for this currently starts at late_initcall and runs for driver_deferred_probe_timeout seconds. The assumption being that all available drivers would be loaded and registered before the timer expires. This means, the driver_deferred_probe_timeout has to be pretty large for it to cover the worst case. But if we set the default value for it to cover the worst case, it would significantly slow down the average case. For this reason, the default value is set to 0. Also, with CONFIG_MODULES=y and the current default values of driver_deferred_probe_timeout=0 and fw_devlink=on, devices with missing drivers will cause their consumer devices to always defer their probes. This is because device links created by fw_devlink defer the probe even before the consumer driver's probe() is called. Instead of a fixed timeout, if we extend an unexpired deferred probe timer on every successful driver registration, with the expectation more modules would be loaded in the near future, then the default value of driver_deferred_probe_timeout only needs to be as long as the worst case time difference between two consecutive module loads. So let's implement that and set the default value to 10 seconds when CONFIG_MODULES=y. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: linux-gpio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220429220933.1350374-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2022-05-19 19:32:33 +02:00
Saravana Kannan	f79f662e4c	driver core: Add "*" wildcard support to driver_async_probe cmdline param ... There's currently no way to use driver_async_probe kernel cmdline param to enable default async probe for all drivers. So, add support for "*" to match with all driver names. When "*" is used, all other drivers listed in driver_async_probe are drivers that will NOT match the "*". For example: * driver_async_probe=drvA,drvB,drvC drvA, drvB and drvC do asynchronous probing. * driver_async_probe=* All drivers do asynchronous probing except those that have set PROBE_FORCE_SYNCHRONOUS flag. * driver_async_probe=*,drvA,drvB,drvC All drivers do asynchronous probing except drvA, drvB, drvC and those that have set PROBE_FORCE_SYNCHRONOUS flag. Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220504005344.117803-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2022-05-19 19:28:24 +02:00
Zhen Lei	8f0f104e2a	arm64: kdump: Do not allocate crash low memory if not needed ... When "crashkernel=X,high" is specified, the specified "crashkernel=Y,low" memory is not required in the following corner cases: 1. If both CONFIG_ZONE_DMA and CONFIG_ZONE_DMA32 are disabled, it means that the devices can access any memory. 2. If the system memory is small, the crash high memory may be allocated from the DMA zones. If that happens, there's no need to allocate another crash low memory because there's already one. Add condition '(crash_base >= CRASH_ADDR_LOW_MAX)' to determine whether the 'high' memory is allocated above DMA zones. Note: when both CONFIG_ZONE_DMA and CONFIG_ZONE_DMA32 are disabled, the entire physical memory is DMA accessible, CRASH_ADDR_LOW_MAX equals 'PHYS_MASK + 1'. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220511032033.426-1-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>	2022-05-16 20:01:38 +01:00
Muchun Song	9c54c522bb	mm: hugetlb_vmemmap: use kstrtobool for hugetlb_vmemmap param parsing ... Use kstrtobool rather than open coding "on" and "off" parsing in mm/hugetlb_vmemmap.c, which is more powerful to handle all kinds of parameters like 'Yy1Nn0' or [oO][NnFf] for "on" and "off". Link: https://lkml.kernel.org/r/20220512041142.39501-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-05-13 16:48:56 -07:00
Xiao Yang	553b0cb30b	x86/speculation: Add missing srbds=off to the mitigations= help text ... The mitigations= cmdline option help text misses the srbds=off option. Add it. [ bp: Add a commit message. ] Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220513101637.216487-1-yangx.jy@fujitsu.com	2022-05-13 14:48:50 +02:00
Paul E. McKenney	ce13389053	Merge branch 'exp.2022.05.11a' into HEAD ... exp.2022.05.11a: Expedited-grace-period latency-reduction updates.	2022-05-11 11:49:35 -07:00
Uladzislau Rezki	28b3ae4265	rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT ... Currently both expedited and regular grace period stall warnings use a single timeout value that with units of seconds. However, recent Android use cases problem require a sub-100-millisecond expedited RCU CPU stall warning. Given that expedited RCU grace periods normally complete in far less than a single millisecond, especially for small systems, this is not unreasonable. Therefore introduce the CONFIG_RCU_EXP_CPU_STALL_TIMEOUT kernel configuration that defaults to 20 msec on Android and remains the same as that of the non-expedited stall warnings otherwise. It also can be changed in run-time via: /sys/.../parameters/rcu_exp_cpu_stall_timeout. [ paulmck: Default of zero to use CONFIG_RCU_STALL_TIMEOUT. ] Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2022-05-11 11:38:50 -07:00
Randy Dunlap	4a840d5fdc	Documentation: drop more IDE boot options and ide-cd.rst ... Drop ide-* command line options. Drop cdrom/ide-cd.rst documentation. Fixes: 898ee22c32 ("Drop Documentation/ide/") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20220424033701.7988-1-rdunlap@infradead.org [jc: also deleted reference from cdrom/index.rst] Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2022-05-09 16:20:07 -06:00
Damien Le Moal	fa82cabb88	doc: admin-guide: Update libata kernel parameters ... Cleanup the text text describing the libata.force boot parameter and update the list of the values to include all supported horkage and link flag that can be forced. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de>	2022-05-09 20:42:36 +09:00
Zhen Lei	5832f1ae50	docs: kdump: Update the crashkernel description for arm64 ... Now arm64 has added support for "crashkernel=X,high" and "crashkernel=Y,low". Unlike x86, crash low memory is not allocated if "crashkernel=Y,low" is not specified. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220506114402.365-7-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>	2022-05-07 20:00:39 +01:00
Mimi Zohar	989dc72511	ima: define a new template field named 'd-ngv2' and templates ... In preparation to differentiate between unsigned regular IMA file hashes and fs-verity's file digests in the IMA measurement list, define a new template field named 'd-ngv2'. Also define two new templates named 'ima-ngv2' and 'ima-sigv2', which include the new 'd-ngv2' field. Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>	2022-05-05 11:49:13 -04:00
Paul E. McKenney	be05ee5437	Merge branches 'docs.2022.04.20a', 'fixes.2022.04.20a', 'nocb.2022.04.11b', 'rcu-tasks.2022.04.11b', 'srcu.2022.05.03a', 'torture.2022.04.11b', 'torture-tasks.2022.04.20a' and 'torturescript.2022.04.20a' into HEAD ... docs.2022.04.20a: Documentation updates. fixes.2022.04.20a: Miscellaneous fixes. nocb.2022.04.11b: Callback-offloading updates. rcu-tasks.2022.04.11b: RCU-tasks updates. srcu.2022.05.03a: Put SRCU on a memory diet. torture.2022.04.11b: Torture-test updates. torture-tasks.2022.04.20a: Avoid torture testing changing RCU configuration. torturescript.2022.04.20a: Torture-test scripting updates.	2022-05-03 10:21:40 -07:00
Paul E. McKenney	a57ffb3c6b	srcu: Automatically determine size-transition strategy at boot ... This commit adds a srcutree.convert_to_big option of zero that causes SRCU to decide at boot whether to wait for contention (small systems) or immediately expand to large (large systems). A new srcutree.big_cpu_lim (defaulting to 128) defines how many CPUs constitute a large system. Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2022-05-03 10:19:39 -07:00
Muchun Song	47010c040d	mm: hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP* ... The word of "free" is not expressive enough to express the feature of optimizing vmemmap pages associated with each HugeTLB, rename this keywork to "optimize". In this patch , cheanup configs to make code more expressive. Link: https://lkml.kernel.org/r/20220404074652.68024-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>	2022-04-28 23:16:15 -07:00
Paul E. McKenney	3791a22374	kernel/smp: Provide boot-time timeout for CSD lock diagnostics ... Debugging of problems involving insanely long-running SMI handlers proceeds better if the CSD-lock timeout can be adjusted. This commit therefore provides a new smp.csd_lock_timeout kernel boot parameter that specifies the timeout in milliseconds. The default remains at the previously hard-coded value of five seconds. [ paulmck: Apply feedback from Juergen Gross. ] Cc: Rik van Riel <riel@surriel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2022-04-20 16:50:30 -07:00
Randy Dunlap	389cfd9670	docs/admin: alphabetize parts of kernel-parameters.txt (part 2) ... Alphabetize several of the kernel boot parameters in kernel-parameters.txt. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>	2022-04-16 02:49:05 -06:00