Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
Register a new limit stateful object type into the stateful object
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a new feature to hashlimit that allows matching on the
current packet/byte rate without rate limiting. This can be enabled
with a new flag --hashlimit-rate-match. The match returns true if the
current rate of packets is above/below the user specified value.
The main difference between the existing algorithm and the new one is
that the existing algorithm rate-limits the flow whereas the new
algorithm does not. Instead it *classifies* the flow based on whether
it is above or below a certain rate. I will demonstrate this with an
example below. Let us assume this rule:
iptables -A INPUT -m hashlimit --hashlimit-above 10/s -j new_chain
If the packet rate is 15/s, the existing algorithm would ACCEPT 10
packets every second and send 5 packets to "new_chain".
But with the new algorithm, as long as the rate of 15/s is sustained,
all packets will continue to match and every packet is sent to new_chain.
This new functionality will let us classify different flows based on
their current rate, so that further decisions can be made on them based on
what the current rate is.
This is how the new algorithm works:
We divide time into intervals of 1 (sec/min/hour) as specified by
the user. We keep track of the number of packets/bytes processed in the
current interval. After each interval we reset the counter to 0.
When we receive a packet for match, we look at the packet rate
during the current interval and the previous interval to make a
decision:
if [ prev_rate < user and cur_rate < user ]
return Below
else
return Above
Where cur_rate is the number of packets/bytes seen in the current
interval, prev is the number of packets/bytes seen in the previous
interval and 'user' is the rate specified by the user.
We also provide flexibility to the user for choosing the time
interval using the option --hashilmit-interval. For example the user can
keep a low rate like x/hour but still keep the interval as small as 1
second.
To preserve backwards compatibility we have to add this feature in a new
revision, so I've created revision 3 for hashlimit. The two new options
we add are:
--hashlimit-rate-match
--hashlimit-rate-interval
I have updated the help text to add these new options. Also added a few
tests for the new options.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. Basically, updates to the conntrack core, enhancements for
nf_tables, conversion of netfilter hooks from linked list to array to
improve memory locality and asorted improvements for the Netfilter
codebase. More specifically, they are:
1) Add expection to hashes after timer initialization to prevent
access from another CPU that walks on the hashes and calls
del_timer(), from Florian Westphal.
2) Don't update nf_tables chain counters from hot path, this is only
used by the x_tables compatibility layer.
3) Get rid of nested rcu_read_lock() calls from netfilter hook path.
Hooks are always guaranteed to run from rcu read side, so remove
nested rcu_read_lock() where possible. Patch from Taehee Yoo.
4) nf_tables new ruleset generation notifications include PID and name
of the process that has updated the ruleset, from Phil Sutter.
5) Use skb_header_pointer() from nft_fib, so we can reuse this code from
the nf_family netdev family. Patch from Pablo M. Bermudo.
6) Add support for nft_fib in nf_tables netdev family, also from Pablo.
7) Use deferrable workqueue for conntrack garbage collection, to reduce
power consumption, from Patch from Subash Abhinov Kasiviswanathan.
8) Add nf_ct_expect_iterate_net() helper and use it. From Florian
Westphal.
9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian.
10) Drop references on conntrack removal path when skbuffs has escaped via
nfqueue, from Florian.
11) Don't queue packets to nfqueue with dying conntrack, from Florian.
12) Constify nf_hook_ops structure, from Florian.
13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter.
14) Add nla_strdup(), from Phil Sutter.
15) Rise nf_tables objects name size up to 255 chars, people want to use
DNS names, so increase this according to what RFC 1035 specifies.
Patch series from Phil Sutter.
16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook
registration on demand, suggested by Eric Dumazet, patch from Florian.
17) Remove unused variables in compat_copy_entry_from_user both in
ip_tables and arp_tables code. Patch from Taehee Yoo.
18) Constify struct nf_conntrack_l4proto, from Julia Lawall.
19) Constify nf_loginfo structure, also from Julia.
20) Use a single rb root in connlimit, from Taehee Yoo.
21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo.
22) Use audit_log() instead of open-coding it, from Geliang Tang.
23) Allow to mangle tcp options via nft_exthdr, from Florian.
24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes
a fix for a miscalculation of the minimal length.
25) Simplify branch logic in h323 helper, from Nick Desaulniers.
26) Calculate netlink attribute size for conntrack tuple at compile
time, from Florian.
27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure.
From Florian.
28) Remove holes in nf_conntrack_l4proto structure, so it becomes
smaller. From Florian.
29) Get rid of print_tuple() indirection for /proc conntrack listing.
Place all the code in net/netfilter/nf_conntrack_standalone.c.
Patch from Florian.
30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is
off. From Florian.
31) Constify most nf_conntrack_{l3,l4}proto helper functions, from
Florian.
32) Fix broken indentation in ebtables extensions, from Colin Ian King.
33) Fix several harmless sparse warning, from Florian.
34) Convert netfilter hook infrastructure to use array for better memory
locality, joint work done by Florian and Aaron Conole. Moreover, add
some instrumentation to debug this.
35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once
per batch, from Florian.
36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian.
37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao.
38) Remove unused code in the generic protocol tracker, from Davide
Caratti.
I think I will have material for a second Netfilter batch in my queue if
time allow to make it fit in this merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=5fxW
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.14 merge window.
I'm sending this early, as my continuing journey into fatherhood is
occurring really soon now, I'm going to be mostly useless for the next
couple of weeks, though I may be able to read email, I doubt I'll be
doing much patch applications or git sending. If anything urgent pops
up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
you.
Outside drm changes:
Some rcar-du updates that touch the V4L tree, all acks should be in
place. It adds one export to the radix tree code for new i915 use
case. There are some minor AGP cleanups (don't see that too often).
Changes to the vbox driver in staging to avoid breaking compilation.
Summary:
core:
- Atomic helper fixes
- Atomic UAPI fixes
- Add YCBCR 4:2:0 support
- Drop set_busid hook
- Refactor fb_helper locking
- Remove a bunch of internal APIs
- Add a bunch of better default handlers
- Format modifier/blob plane property added
- More internal header refactoring
- Make more internal API names consistent
- Enhanced syncobj APIs (wait/signal/reset/create signalled)
bridge:
- Add Synopsys Designware MIPI DSI host bridge driver
tiny:
- Add Pervasive Displays RePaper displays
- Add support for LEGO MINDSTORMS EV3 LCD
i915:
- Lots of GEN10/CNL support patches
- drm syncobj support
- Skylake+ watermark refactoring
- GVT vGPU 48-bit ppgtt support
- GVT performance improvements
- NOA change ioctl
- CCS (color compression) scanout support
- GPU reset improvements
amdgpu:
- Initial hugepage support
- BO migration logic rework
- Vega10 improvements
- Powerplay fixes
- Stop reprogramming the MC
- Fixes for ACP audio on stoney
- SR-IOV fixes/improvements
- Command submission overhead improvements
amdkfd:
- Non-dGPU upstreaming patches
- Scratch VA ioctl
- Image tiling modes
- Update PM4 headers for new firmware
- Drop all BUG_ONs.
nouveau:
- GP108 modesetting support.
- Disable MSI on big endian.
vmwgfx:
- Add fence fd support.
msm:
- Runtime PM improvements
exynos:
- NV12MT support
- Refactor KMS drivers
imx-drm:
- Lock scanout channel to improve memory bw
- Cleanups
etnaviv:
- GEM object population fixes
tegra:
- Prep work for Tegra186 support
- PRIME mmap support
sunxi:
- HDMI support improvements
- HDMI CEC support
omapdrm:
- HDMI hotplug IRQ support
- Big driver cleanup
- OMAP5 DSI support
rcar-du:
- vblank fixes
- VSP1 updates
arcgpu:
- Minor fixes
stm:
- Add STM32 DSI controller driver
dw_hdmi:
- Add support for Rockchip RK3399
- HDMI CEC support
atmel-hlcdc:
- Add 8-bit color support
vc4:
- Atomic fixes
- New ioctl to attach a label to a buffer object
- HDMI CEC support
- Allow userspace to dictate rendering order on submit ioctl"
* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
drm/syncobj: Add a signal ioctl (v3)
drm/syncobj: Add a reset ioctl (v3)
drm/syncobj: Add a syncobj_array_find helper
drm/syncobj: Allow wait for submit and signal behavior (v5)
drm/syncobj: Add a CREATE_SIGNALED flag
drm/syncobj: Add a callback mechanism for replace_fence (v3)
drm/syncobj: add sync obj wait interface. (v8)
i915: Use drm_syncobj_fence_get
drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
drm/syncobj: Rename fence_get to find_fence
drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
...
Pull misc fixes from Al Viro:
"Loose ends and regressions from the last merge window.
Strictly speaking, only binfmt_flat thing is a build regression per
se - the rest is 'only sparse cares about that' stuff"
[ This came in before the 4.13 release and could have gone there, but it
was late in the release and nothing seemed critical enough to care, so
I'm pulling it in the 4.14 merge window instead - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp()
compat_hdio_ioctl: Fix a declaration
<linux/uaccess.h>: Fix copy_in_user() declaration
annotate RWF_... flags
teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments
Report TCP MD5 (RFC2385) signing keys, addresses and address prefixes to
processes with CAP_NET_ADMIN requesting INET_DIAG_INFO. Currently it is
not possible to retrieve these from the kernel once they have been
configured on sockets.
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FMR_OF_LAST flag is set on the last fsmap record being returned for
the dataset requested, contrary to what the header file says. Fix the
docs to reflect the behavior of all fsmap implementations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Root in a non-initial user ns cannot be trusted to write a traditional
security.capability xattr. If it were allowed to do so, then any
unprivileged user on the host could map his own uid to root in a private
namespace, write the xattr, and execute the file with privilege on the
host.
However supporting file capabilities in a user namespace is very
desirable. Not doing so means that any programs designed to run with
limited privilege must continue to support other methods of gaining and
dropping privilege. For instance a program installer must detect
whether file capabilities can be assigned, and assign them if so but set
setuid-root otherwise. The program in turn must know how to drop
partial capabilities, and do so only if setuid-root.
This patch introduces v3 of the security.capability xattr. It builds a
vfs_ns_cap_data struct by appending a uid_t rootid to struct
vfs_cap_data. This is the absolute uid_t (that is, the uid_t in user
namespace which mounted the filesystem, usually init_user_ns) of the
root id in whose namespaces the file capabilities may take effect.
When a task asks to write a v2 security.capability xattr, if it is
privileged with respect to the userns which mounted the filesystem, then
nothing should change. Otherwise, the kernel will transparently rewrite
the xattr as a v3 with the appropriate rootid. This is done during the
execution of setxattr() to catch user-space-initiated capability writes.
Subsequently, any task executing the file which has the noted kuid as
its root uid, or which is in a descendent user_ns of such a user_ns,
will run the file with capabilities.
Similarly when asking to read file capabilities, a v3 capability will
be presented as v2 if it applies to the caller's namespace.
If a task writes a v3 security.capability, then it can provide a uid for
the xattr so long as the uid is valid in its own user namespace, and it
is privileged with CAP_SETFCAP over its namespace. The kernel will
translate that rootid to an absolute uid, and write that to disk. After
this, a task in the writer's namespace will not be able to use those
capabilities (unless rootid was 0), but a task in a namespace where the
given uid is root will.
Only a single security.capability xattr may exist at a time for a given
file. A task may overwrite an existing xattr so long as it is
privileged over the inode. Note this is a departure from previous
semantics, which required privilege to remove a security.capability
xattr. This check can be re-added if deemed useful.
This allows a simple setxattr to work, allows tar/untar to work, and
allows us to tar in one namespace and untar in another while preserving
the capability, without risking leaking privilege into a parent
namespace.
Example using tar:
$ cp /bin/sleep sleepx
$ mkdir b1 b2
$ lxc-usernsexec -m b:0:100000:1 -m b:1:$(id -u):1 -- chown 0:0 b1
$ lxc-usernsexec -m b:0:100001:1 -m b:1:$(id -u):1 -- chown 0:0 b2
$ lxc-usernsexec -m b:0:100000:1000 -- tar --xattrs-include=security.capability --xattrs -cf b1/sleepx.tar sleepx
$ lxc-usernsexec -m b:0:100001:1000 -- tar --xattrs-include=security.capability --xattrs -C b2 -xf b1/sleepx.tar
$ lxc-usernsexec -m b:0:100001:1000 -- getcap b2/sleepx
b2/sleepx = cap_sys_admin+ep
# /opt/ltp/testcases/bin/getv3xattr b2/sleepx
v3 xattr, rootid is 100001
A patch to linux-test-project adding a new set of tests for this
functionality is in the nsfscaps branch at github.com/hallyn/ltp
Changelog:
Nov 02 2016: fix invalid check at refuse_fcap_overwrite()
Nov 07 2016: convert rootid from and to fs user_ns
(From ebiederm: mar 28 2017)
commoncap.c: fix typos - s/v4/v3
get_vfs_caps_from_disk: clarify the fs_ns root access check
nsfscaps: change the code split for cap_inode_setxattr()
Apr 09 2017:
don't return v3 cap for caps owned by current root.
return a v2 cap for a true v2 cap in non-init ns
Apr 18 2017:
. Change the flow of fscap writing to support s_user_ns writing.
. Remove refuse_fcap_overwrite(). The value of the previous
xattr doesn't matter.
Apr 24 2017:
. incorporate Eric's incremental diff
. move cap_convert_nscap to setxattr and simplify its usage
May 8, 2017:
. fix leaking dentry refcount in cap_inode_getsecurity
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The BINDER_GET_NODE_DEBUG_INFO ioctl will return debug info on
a node. Each successive call reusing the previous return value
will return the next node. The data will be used by
libmemunreachable to mark the pointers with kernel references
as reachable.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add socket mark and priority to fields that can be set by
ebpf program when a socket is created.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used by the IPv6 host table which will be introduced in the
following patches. The fields in the header are added per-use. This header
is global and can be reused by many drivers.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a different approach from the first attempt in f2c6df7dbf
("loop: support 4k physical blocksize"). Rather than extending
LOOP_{GET,SET}_STATUS, add a separate ioctl just for setting the block
size.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds information about storage keys to the struct returned by
the KVM_PPC_GET_SMMU_INFO ioctl. The new fields replace a pad field,
which was zeroed by previous kernel versions. Thus userspace that
knows about the new fields will see zeroes when running on an older
kernel, indicating that storage keys are not supported. The size of
the structure has not changed.
The number of keys is hard-coded for the CPUs supported by HV KVM,
which is just POWER7, POWER8 and POWER9.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Define the raw IP type. This is needed for raw IP net devices
like rmnet.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the Qualcomm multiplexing and aggregation (MAP) ether type 0x00F9.
This is needed for receiving data in the MAP protocol like RMNET. This is
not an officially registered ID.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 45f119bf93.
Eric Dumazet says:
We found at Google a significant regression caused by
45f119bf93 tcp: remove header prediction
In typical RPC (TCP_RR), when a TCP socket receives data, we now call
tcp_ack() while we used to not call it.
This touches enough cache lines to cause a slowdown.
so problem does not seem to be HP removal itself but the tcp_ack()
call. Therefore, it might be possible to remove HP after all, provided
one finds a way to elide tcp_ack for most cases.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NSH draft says:
An IEEE EtherType, 0x894F, has been allocated for NSH.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the forces IFE lfb type according to IEEE registered
ethertypes. See http://standards-oui.ieee.org/ethertype/eth.txt for more
information. Since there exists the IFE subsystem it can be used there.
This patch also use the correct word "ForCES" instead of "FoRCES" which
is a spelling error inside the IEEE ethertype specification.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For understanding how the workload maps to memory channels and hardware
behavior, it's very important to collect address maps with physical
addresses. For example, 3D XPoint access can only be found by filtering
the physical address.
Add a new sample type for physical address.
perf already has a facility to collect data virtual address. This patch
introduces a function to convert the virtual address to physical address.
The function is quite generic and can be extended to any architecture as
long as a virtual address is provided.
- For kernel direct mapping addresses, virt_to_phys is used to convert
the virtual addresses to physical address.
- For user virtual addresses, __get_user_pages_fast is used to walk the
pages tables for user physical address.
- This does not work for vmalloc addresses right now. These are not
resolved, but code to do that could be added.
The new sample type requires collecting the virtual address. The
virtual address will not be output unless SAMPLE_ADDR is applied.
For security, the physical address can only be exposed to root or
privileged user.
Tested-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/1503967969-48278-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MediaTek BTIF controller is the serial interface similar to UART but it
works only as the digital device which is mainly used to communicate with
the connectivity module called CONNSYS inside the SoC which could be mostly
found on those MediaTek SoCs with Bluetooth feature such as MT7622 and
MT7623 SoCs.
And the controller is made as being compatible with the 8250 register
layout with extra registers such as DMA enablement so it tends to be
integrated with reusing 8250 OF driver. However, DMA mode is not being
supported yet in the current driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UAPI has a global list of unique numbers for different port types.
The commit
a2d6a987bf ("serial: 8250: Add new port type for TI DA8xx/66AK2x")
introduced a new port type and brought the collision with two other port
types.
Reuse 95 for it instead.
Fixes: a2d6a987bf ("serial: 8250: Add new port type for TI DA8xx/66AK2x")
Cc: David Lechner <david@lechnology.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PORT_MFD is not in use since commit
1bd187de53 ("x86, intel-mid: remove Intel MID specific serial support")
Remove leftover.
Fixes: 1bd187de53 ("x86, intel-mid: remove Intel MID specific serial support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It used to be a gap in port definitions after PORT_MAX_8250. Since the
new drivers are coming the gap become shorter and shorter until the
commit a2d6a987bf ("serial: 8250: Add new port type for TI DA8xx/66AK2x")
completely removed it.
So, while type here is just a formality, make things a little bit more
explicit for this driver and move port types to UAPI header. Note,
it uses two types for now.
Fixes: fddceb8b53 ("tty: 8250: Add 64byte UART support for FSL platforms")
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addition of map_flags BPF_SOCKMAP_STRPARSER flags was to handle a
specific use case where we want to have BPF parse program disabled on
an entry in a sockmap.
However, Alexei found the API a bit cumbersome and I agreed. Lets
remove the STRPARSER flag and support the use case by allowing socks
to be in multiple maps. This allows users to create two maps one with
programs attached and one without. When socks are added to maps they
now inherit any programs attached to the map. This is a nice
generalization and IMO improves the API.
The API rules are less ambiguous and do not need a flag:
- When a sock is added to a sockmap we have two cases,
i. The sock map does not have any attached programs so
we can add sock to map without inheriting bpf programs.
The sock may exist in 0 or more other maps.
ii. The sock map has an attached BPF program. To avoid duplicate
bpf programs we only add the sock entry if it does not have
an existing strparser/verdict attached, returning -EBUSY if
a program is already attached. Otherwise attach the program
and inherit strparser/verdict programs from the sock map.
This allows for socks to be in a multiple maps for redirects and
inherit a BPF program from a single map.
Also this patch simplifies the logic around BPF_{EXIST|NOEXIST|ANY}
flags. In the original patch I tried to be extra clever and only
update map entries when necessary. Now I've decided the complexity
is not worth it. If users constantly update an entry with the same
sock for no reason (i.e. update an entry without actually changing
any parameters on map or sock) we still do an alloc/release. Using
this and allowing multiple entries of a sock to exist in a map the
logic becomes much simpler.
Note: Now that multiple maps are supported the "maps" pointer called
when a socket is closed becomes a list of maps to remove the sock from.
To keep the map up to date when a sock is added to the sockmap we must
add the map/elem in the list. Likewise when it is removed we must
remove it from the list. This results in searching the per psock list
on delete operation. On TCP_CLOSE events we walk the list and remove
the psock from all map/entry locations. I don't see any perf
implications in this because at most I have a psock in two maps. If
a psock were to be in many maps its possibly this might be noticeable
on delete but I can't think of a reason to dup a psock in many maps.
The sk_callback_lock is used to protect read/writes to the list. This
was convenient because in all locations we were taking the lock
anyways just after working on the list. Also the lock is per sock so
in normal cases we shouldn't see any contention.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the command payloads that do not have an associated libnvdimm
ioctl. I.e. remove the payloads that would only ever be carried in the
ND_CMD_CALL envelope. This prevents userspace from growing unnecessary
dependencies on this kernel header when userspace already has everything
it needs to craft and send these commands.
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Reported-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Increase PPL area to 1MB and use it as circular buffer to store PPL. The
entry with highest generation number is the latest one. If PPL to be
written is larger then space left in a buffer, rewind the buffer to the
start (don't wrap it).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The fe_status variable s is not initialized meaning it can have any
random garbage status. This could be problematic if fe->ops.tune is
false as s is not updated by the call to fe->ops.tune() and a
subsequent check on the change status will using a garbage value.
Fix this by adding FE_NONE to the enum fe_status and initializing
s to this.
Detected by CoverityScan, CID#112887 ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These formats are compressed 12-bit raw bayer formats with four different
pixel orders. They are similar to 10-bit variants. The formats added by
this patch are
V4L2_PIX_FMT_SBGGR12P
V4L2_PIX_FMT_SGBRG12P
V4L2_PIX_FMT_SGRBG12P
V4L2_PIX_FMT_SRGGB12P
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch implements the L2 frame encapsulation mechanism, referred to
as T.Encaps.L2 in the SRv6 specifications [1].
A new type of SRv6 tunnel mode is added (SEG6_IPTUN_MODE_L2ENCAP). It only
accepts packets with an existing MAC header (i.e., it will not work for
locally generated packets). The resulting packet looks like IPv6 -> SRH ->
Ethernet -> original L3 payload. The next header field of the SRH is set to
NEXTHDR_NONE.
[1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Skylake changed the encoding of the PEBS data source field.
Some combinations are not available anymore, but some new cases
e.g. for L4 cache hit are added.
Fix up the conversion table for Skylake, similar as had been done
for Nehalem.
On Skylake server the encoding for L4 actually means persistent
memory. Handle this case too.
To properly describe it in the abstracted perf format I had to add
some new fields. Since a hit can have only one level add a new
field that is an enumeration, not a bit field to describe
the level. It can describe any level. Some numbers are also
used to describe PMEM and LFB.
Also add a new generic remote flag that can be combined with
the generic level to signify a remote cache.
And there is an extension field for the snoop indication to handle
the Forward state.
I didn't add a generic flag for hops because it's not needed
for Skylake.
I changed the existing encodings for older CPUs to also fill in the
new level and remote fields.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/20170816222156.19953-3-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This will be used by the IPv4 host table which will be introduced in the
following patches. This header is global and can be reused by many
drivers.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used by the IPv4 host table which will be introduced in the
following patches. This header is global and can be reused by many
drivers.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add eDPC support. Get and print the RP PIO error information when the
trigger condition is RP PIO error.
For more information on eDPC, please see PCI Express Base Specification
Revision 3.1, section 6.2.10.3, or view the PCI-SIG eDPC ECN here:
https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_DPC_2012-11-19_final.pdf
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 defines the size of the PCIe capability
structure for v1 devices with link, but we also have a need in the vfio
code for sizing the capability for devices without link, such as Root
Complex Integrated Endpoints. Create a separate define for this ending the
structure before the link fields.
Additionally, this reveals that PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 is currently
incorrect, ending the capability length before the v2 link fields. Rename
this to specify an RC Integrated Endpoint (no link) capability length and
move PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to include the link fields as we have
for the v1 version.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
[bhelgaas: add "_" in "PCI_CAP_EXP_RC ENDPOINT_SIZEOF_V2 44"]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Lguest seems to be rather unused these days. It has seen only patches
ensuring it still builds the last two years and its official state is
"Odd Fixes".
Remove it in order to be able to clean up the paravirt code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: boris.ostrovsky@oracle.com
Cc: lguest@lists.ozlabs.org
Cc: rusty@rustcorp.com.au
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's some stuff still up in the air, let's not get stuck with a
subpar ABI. I'll follow up with something better for 4.14.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
binder_fd_array_object starts with a 4-byte header,
followed by a few fields that are 8 bytes when
ANDROID_BINDER_IPC_32BIT=N.
This can cause alignment issues in a 64-bit kernel
with a 32-bit userspace, as on x86_32 an 8-byte primitive
may be aligned to a 4-byte address. Pad with a __u32
to fix this.
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org> # 4.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch adds ERSPAN type II tunnel support. The implementation
is based on the draft at [1]. One of the purposes is for Linux
box to be able to receive ERSPAN monitoring traffic sent from
the Cisco switch, by creating a ERSPAN tunnel device.
In addition, the patch also adds ERSPAN TX, so Linux virtual
switch can redirect monitored traffic to the ERSPAN tunnel device.
The traffic will be encapsulated into ERSPAN and sent out.
The implementation reuses tunnel key as ERSPAN session ID, and
field 'erspan' as ERSPAN Index fields:
./ip link add dev ers11 type erspan seq key 100 erspan 123 \
local 172.16.1.200 remote 172.16.1.100
To use the above device as ERSPAN receiver, configure
Nexus 5000 switch as below:
monitor session 100 type erspan-source
erspan-id 123
vrf default
destination ip 172.16.1.200
source interface Ethernet1/11 both
source interface Ethernet1/12 both
no shut
monitor erspan origin ip-address 172.16.1.100 global
[1] https://tools.ietf.org/html/draft-foschiano-erspan-01
[2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2
[3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Meenakshi Vohra <mvohra@vmware.com>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-08-21
1) Support RX checksum with IPsec crypto offload for esp4/esp6.
From Ilan Tayari.
2) Fixup IPv6 checksums when doing IPsec crypto offload.
From Yossi Kuperman.
3) Auto load the xfrom offload modules if a user installs
a SA that requests IPsec offload. From Ilan Tayari.
4) Clear RX offload informations in xfrm_input to not
confuse the TX path with stale offload informations.
From Ilan Tayari.
5) Allow IPsec GSO for local sockets if the crypto operation
will be offloaded.
6) Support setting of an output mark to the xfrm_state.
This mark can be used to to do the tunnel route lookup.
From Lorenzo Colitti.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The CEC_EVENT_PIN_LOW/HIGH defines and the cec_queue_pin_event() function
did not specify that these were about CEC pin events.
Since in the future there will also be HPD pin events it is wise to rename
the event defines and function to CEC_EVENT_PIN_CEC_LOW/HIGH and
cec_queue_pin_cec_event() now before these become part of the ABI.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current map creation API does not allow to provide the numa-node
preference. The memory usually comes from where the map-creation-process
is running. The performance is not ideal if the bpf_prog is known to
always run in a numa node different from the map-creation-process.
One of the use case is sharding on CPU to different LRU maps (i.e.
an array of LRU maps). Here is the test result of map_perf_test on
the INNER_LRU_HASH_PREALLOC test if we force the lru map used by
CPU0 to be allocated from a remote numa node:
[ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ]
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec
4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec
3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec
6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec
2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec
1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec
7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec
0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<<
After specifying numa node:
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec
3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec
1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec
6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec
2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec
4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec
7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec
0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<<
This patch adds one field, numa_node, to the bpf_attr. Since numa node 0
is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node
field is honored if and only if the BPF_F_NUMA_NODE flag is set.
Numa node selection is not supported for percpu map.
This patch does not change all the kmalloc. F.e.
'htab = kzalloc()' is not changed since the object
is small enough to stay in the cache.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
to be used in combination with tcp option set support to mimic
iptables TCPMSS --clamp-mss-to-pmtu.
v2: Eric Dumazet points out dst must be initialized.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This allows setting 2 and 4 byte quantities in the tcp option space.
Main purpose is to allow native replacement for xt_TCPMSS to
work around pmtu blackholes.
Writes to kind and len are now allowed at the moment, it does not seem
useful to do this as it causes corruption of the tcp option space.
We can always lift this restriction later if a use-case appears.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is useful for directly looking up a task based on class id rather than
having to scan through all open file descriptors.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement MEMBARRIER_CMD_PRIVATE_EXPEDITED with IPIs using cpumask built
from all runqueues for which current thread's mm is the same as the
thread calling sys_membarrier. It executes faster than the non-expedited
variant (no blocking). It also works on NOHZ_FULL configurations.
Scheduler-wise, it requires a memory barrier before and after context
switching between processes (which have different mm). The memory
barrier before context switch is already present. For the barrier after
context switch:
* Our TSO archs can do RELEASE without being a full barrier. Look at
x86 spin_unlock() being a regular STORE for example. But for those
archs, all atomics imply smp_mb and all of them have atomic ops in
switch_mm() for mm_cpumask(), and on x86 the CR3 load acts as a full
barrier.
* From all weakly ordered machines, only ARM64 and PPC can do RELEASE,
the rest does indeed do smp_mb(), so there the spin_unlock() is a full
barrier and we're good.
* ARM64 has a very heavy barrier in switch_to(), which suffices.
* PPC just removed its barrier from switch_to(), but appears to be
talking about adding something to switch_mm(). So add a
smp_mb__after_unlock_lock() for now, until this is settled on the PPC
side.
Changes since v3:
- Properly document the memory barriers provided by each architecture.
Changes since v2:
- Address comments from Peter Zijlstra,
- Add smp_mb__after_unlock_lock() after finish_lock_switch() in
finish_task_switch() to add the memory barrier we need after storing
to rq->curr. This is much simpler than the previous approach relying
on atomic_dec_and_test() in mmdrop(), which actually added a memory
barrier in the common case of switching between userspace processes.
- Return -EINVAL when MEMBARRIER_CMD_SHARED is used on a nohz_full
kernel, rather than having the whole membarrier system call returning
-ENOSYS. Indeed, CMD_PRIVATE_EXPEDITED is compatible with nohz_full.
Adapt the CMD_QUERY mask accordingly.
Changes since v1:
- move membarrier code under kernel/sched/ because it uses the
scheduler runqueue,
- only add the barrier when we switch from a kernel thread. The case
where we switch from a user-space thread is already handled by
the atomic_dec_and_test() in mmdrop().
- add a comment to mmdrop() documenting the requirement on the implicit
memory barrier.
CC: Peter Zijlstra <peterz@infradead.org>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: Andrew Hunter <ahh@google.com>
CC: Maged Michael <maged.michael@gmail.com>
CC: gromer@google.com
CC: Avi Kivity <avi@scylladb.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Dave Watson <davejwatson@fb.com>
Recently we added a new map type called dev map used to forward XDP
packets between ports (6093ec2dc3). This patches introduces a
similar notion for sockets.
A sockmap allows users to add participating sockets to a map. When
sockets are added to the map enough context is stored with the
map entry to use the entry with a new helper
bpf_sk_redirect_map(map, key, flags)
This helper (analogous to bpf_redirect_map in XDP) is given the map
and an entry in the map. When called from a sockmap program, discussed
below, the skb will be sent on the socket using skb_send_sock().
With the above we need a bpf program to call the helper from that will
then implement the send logic. The initial site implemented in this
series is the recv_sock hook. For this to work we implemented a map
attach command to add attributes to a map. In sockmap we add two
programs a parse program and a verdict program. The parse program
uses strparser to build messages and pass them to the verdict program.
The parse programs use the normal strparser semantics. The verdict
program is of type SK_SKB.
The verdict program returns a verdict SK_DROP, or SK_REDIRECT for
now. Additional actions may be added later. When SK_REDIRECT is
returned, expected when bpf program uses bpf_sk_redirect_map(), the
sockmap logic will consult per cpu variables set by the helper routine
and pull the sock entry out of the sock map. This pattern follows the
existing redirect logic in cls and xdp programs.
This gives the flow,
recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock
\
-> kfree_skb
As an example use case a message based load balancer may use specific
logic in the verdict program to select the sock to send on.
Sample programs are provided in future patches that hopefully illustrate
the user interfaces. Also selftests are in follow-on patches.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A class of programs, run from strparser and soon from a new map type
called sock map, are used with skb as the context but on established
sockets. By creating a specific program type for these we can use
bpf helpers that expect full sockets and get the verifier to ensure
these helpers are not used out of context.
The new type is BPF_PROG_TYPE_SK_SKB. This patch introduces the
infrastructure and type.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
v2:
* Renamed ALLOC_MEMORY_OF_SCRATCH to SET_SCRATCH_BACKING_VA
* Removed size parameter from the ioctl, it was unused
* Removed hole in ioctl number space
* No more call to write_config_static_mem
* Return correct error code from ioctl
Signed-off-by: Moses Reuben <moses.reuben@amd.com>
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
IPv6 routes currently lack nexthop flags as in IPv4. This has several
implications.
In the forwarding path, it requires us to check the carrier state of the
nexthop device and potentially ignore a linkdown route, instead of
checking for RTNH_F_LINKDOWN.
It also requires capable drivers to use the user facing IPv6-specific
route flags to provide offload indication, instead of using the nexthop
flags as in IPv4.
Add nexthop flags to IPv6 routes in the 40 bytes hole and use it to
provide offload indication instead of the RTF_OFFLOAD flag, which is
removed while it's still not part of any official kernel release.
In the near future we would like to use the field for the
RTNH_F_{LINKDOWN,DEAD} flags, but this change is more involved and might
not be ready in time for the current cycle.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.
I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.
The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.
| Method | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None | 0.99 | 504 | 686 |
| lzo | 1.66 | 398 | 442 |
| zlib | 2.58 | 65 | 241 |
| zstd 1 | 2.57 | 260 | 383 |
| zstd 3 | 2.71 | 174 | 408 |
| zstd 6 | 2.87 | 70 | 398 |
| zstd 9 | 2.92 | 43 | 406 |
| zstd 12 | 2.93 | 21 | 408 |
| zstd 15 | 3.01 | 11 | 354 |
The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.
| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 |
| lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 |
| zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 |
| zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 |
[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introducing USB charger type and state definition can help
to support USB charging which will be added in USB phy core.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
linux/errno.h is very sensitive to coordination with libc headers.
Nothing in linux/quota.h needs it, so this change allows using
this header in more contexts.
Signed-off-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.
Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.
This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:
1. The xfrm mark is used to match xfrm policies and states, while
the xfrm output mark is used to set the mark (and influence
the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
the originating socket or transformed packet, but the output
mark is arbitrary and depends only on the state.
The use of a separate mark provides additional flexibility. For
example:
- A packet subject to two transforms (e.g., transport mode inside
tunnel mode) can have two different output marks applied to it,
one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
emitted by an IPsec tunnel can be routed based on a mark that
is determined by the tunnel, not by the marks of the
unencrypted packets.
- Support for setting the output marks can be introduced without
breaking any existing setups that employ both mark-based
routing and xfrm tunnel mode. Simply changing the code to use
the xfrm mark for routing output packets could xfrm mark could
change behaviour in a way that breaks these setups.
If the output mark is unspecified or set to zero, the mark is not
set or changed.
Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=),
BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that
particularly *JLT/*JLE counterparts involving immediates need
to be rewritten from e.g. X < [IMM] by swapping arguments into
[IMM] > X, meaning the immediate first is required to be loaded
into a register Y := [IMM], such that then we can compare with
Y > X. Note that the destination operand is always required to
be a register.
This has the downside of having unnecessarily increased register
pressure, meaning complex program would need to spill other
registers temporarily to stack in order to obtain an unused
register for the [IMM]. Loading to registers will thus also
affect state pruning since we need to account for that register
use and potentially those registers that had to be spilled/filled
again. As a consequence slightly more stack space might have
been used due to spilling, and BPF programs are a bit longer
due to extra code involving the register load and potentially
required spill/fills.
Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=)
counterparts to the eBPF instruction set. Modifying LLVM to
remove the NegateCC() workaround in a PoC patch at [1] and
allowing it to also emit the new instructions resulted in
cilium's BPF programs that are injected into the fast-path to
have a reduced program length in the range of 2-3% (e.g.
accumulated main and tail call sections from one of the object
file reduced from 4864 to 4729 insns), reduced complexity in
the range of 10-30% (e.g. accumulated sections reduced in one
of the cases from 116432 to 88428 insns), and reduced stack
usage in the range of 1-5% (e.g. accumulated sections from one
of the object files reduced from 824 to 784b).
The modification for LLVM will be incorporated in a backwards
compatible way. Plan is for LLVM to have i) a target specific
option to offer a possibility to explicitly enable the extension
by the user (as we have with -m target specific extensions today
for various CPU insns), and ii) have the kernel checked for
presence of the extensions and enable them transparently when
the user is selecting more aggressive options such as -march=native
in a bpf target context. (Other frontends generating BPF byte
code, e.g. ply can probe the kernel directly for its code
generation.)
[1] https://github.com/borkmann/llvm/tree/bpf-insns
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc can get confused by this code and it thinks dev_features can be
returned uninitialized. So initialize to NULL at the beginning to shut up
the warning.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Set media_version to LINUX_VERSION_CODE, just as we did for
driver_version.
Nobody ever rememebers to update the version number, but
LINUX_VERSION_CODE will always be updated.
Move the MEDIA_API_VERSION define to the ifndef __KERNEL__ section of the
media.h header. That way kernelspace can't accidentally start to use
it again.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch implements a new type of lightweight tunnel named seg6local.
A seg6local lwt is defined by a type of action and a set of parameters.
The action represents the operation to perform on the packets matching the
lwt's route, and is not necessarily an encapsulation. The set of parameters
are arguments for the processing function.
Each action is defined in a struct seg6_action_desc within
seg6_action_table[]. This structure contains the action, mandatory
attributes, the processing function, and a static headroom size required by
the action. The mandatory attributes are encoded as a bitmask field. The
static headroom is set to a non-zero value when the processing function
always add a constant number of bytes to the skb (e.g. the header size for
encapsulations).
To facilitate rtnetlink-related operations such as parsing, fill_encap,
and cmp_encap, each type of action parameter is associated to three
function pointers, in seg6_action_params[].
All actions defined in seg6_local.h are detailed in [1].
[1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation error:
error: ‘DLM_RESNAME_MAXLEN’ undeclared here (not in a function)
char resource_name[DLM_RESNAME_MAXLEN];
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David Teigland <teigland@redhat.com>
Mirrors the TEE_DESC_PRIVILEGED bit of struct tee_desc:flags into struct
tee_ioctl_version_data:gen_caps as TEE_GEN_CAP_PRIVILEGED in
tee_ioctl_version()
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The kernel supports zerocopy sendmsg in virtio and tap. Expand the
infrastructure to support other socket types. Introduce a completion
notification channel over the socket error queue. Notifications are
returned with ee_origin SO_EE_ORIGIN_ZEROCOPY. ee_errno is 0 to avoid
blocking the send/recv path on receiving notifications.
Add reference counting, to support the skb split, merge, resize and
clone operations possible with SOCK_STREAM and other socket types.
The patch does not yet modify any datapaths.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow user space applications to see which routes are offloaded and
which aren't by setting the RTNH_F_OFFLOAD flag when dumping them.
To be consistent with IPv4, offload indication is provided on a
per-nexthop basis.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following stats into SCM_TIMESTAMPING_OPT_STATS control msg:
TCP_NLA_PACING_RATE
TCP_NLA_DELIVERY_RATE
TCP_NLA_SND_CWND
TCP_NLA_REORDERING
TCP_NLA_MIN_RTT
TCP_NLA_RECUR_RETRANS
TCP_NLA_DELIVERY_RATE_APP_LMT
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
was used by tcp prequeue and header prediction.
TCPFORWARDRETRANS use was removed in january.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same conversion as for table names, use NFT_NAME_MAXLEN as upper
boundary as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same conversion as for table names, use NFT_NAME_MAXLEN as upper
boundary as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same conversion as for table names, use NFT_NAME_MAXLEN as upper
boundary as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allocate all table names dynamically to allow for arbitrary lengths but
introduce NFT_NAME_MAXLEN as an upper sanity boundary. It's value was
chosen to allow using a domain name as per RFC 1035.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds support for filtering based on time since last used.
When we are dumping a large number of actions it is useful to
have the option of filtering based on when the action was last
used to reduce the amount of data crossing to user space.
With this patch the user space app sets the TCA_ROOT_TIME_DELTA
attribute with the value in milliseconds with "time of interest
since now". The kernel converts this to jiffies and does the
filtering comparison matching entries that have seen activity
since then and returns them to user space.
Old kernels and old tc continue to work in legacy mode since
they dont specify this attribute.
Some example (we have 400 actions bound to 400 filters); at
installation time. Using updated when tc setting the time of
interest to 120 seconds earlier (we see 400 actions):
prompt$ hackedtc actions ls action gact since 120000| grep index | wc -l
400
go get some coffee and wait for > 120 seconds and try again:
prompt$ hackedtc actions ls action gact since 120000 | grep index | wc -l
0
Lets see a filter bound to one of these actions:
....
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2 success 1)
match 7f000002/ffffffff at 12 (success 1 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1145 sec used 802 sec
Action statistics:
Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
that coffee took long, no? It was good.
Now lets ping -c 1 127.0.0.2, then run the actions again:
prompt$ hackedtc actions ls action gact since 120 | grep index | wc -l
1
More details please:
prompt$ hackedtc -s actions ls action gact since 120000
action order 0: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1270 sec used 30 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
And the filter?
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 4 success 2)
match 7f000002/ffffffff at 12 (success 2 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1324 sec used 84 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When you dump hundreds of thousands of actions, getting only 32 per
dump batch even when the socket buffer and memory allocations allow
is inefficient.
With this change, the user will get as many as possibly fitting
within the given constraints available to the kernel.
The top level action TLV space is extended. An attribute
TCA_ROOT_FLAGS is used to carry flags; flag TCA_FLAG_LARGE_DUMP_ON
is set by the user indicating the user is capable of processing
these large dumps. Older user space which doesnt set this flag
doesnt get the large (than 32) batches.
The kernel uses the TCA_ROOT_COUNT attribute to tell the user how many
actions are put in a single batch. As such user space app knows how long
to iterate (independent of the type of action being dumped)
instead of hardcoded maximum of 32 thus maintaining backward compat.
Some results dumping 1.5M actions below:
first an unpatched tc which doesnt understand these features...
prompt$ time -p tc actions ls action gact | grep index | wc -l
1500000
real 1388.43
user 2.07
sys 1386.79
Now lets see a patched tc which sets the correct flags when requesting
a dump:
prompt$ time -p updatedtc actions ls action gact | grep index | wc -l
1500000
real 178.13
user 2.02
sys 176.96
That is about 8x performance improvement for tc app which sets its
receive buffer to about 32K.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generic bitflags attribute content sent to the kernel by user.
With this netlink attr type the user can either set or unset a
flag in the kernel.
The value is a bitmap that defines the bit values being set
The selector is a bitmask that defines which value bit is to be
considered.
A check is made to ensure the rules that a kernel subsystem always
conforms to bitflags the kernel already knows about. i.e
if the user tries to set a bit flag that is not understood then
the _it will be rejected_.
In the most basic form, the user specifies the attribute policy as:
[ATTR_GOO] = { .type = NLA_BITFIELD32, .validation_data = &myvalidflags },
where myvalidflags is the bit mask of the flags the kernel understands.
If the user _does not_ provide myvalidflags then the attribute will
also be rejected.
Examples:
value = 0x0, and selector = 0x1
implies we are selecting bit 1 and we want to set its value to 0.
value = 0x2, and selector = 0x2
implies we are selecting bit 2 and we want to set its value to 1.
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forward Error Correction (FEC) modes i.e Base-R
and Reed-Solomon modes are introduced in 25G/40G/100G standards
for providing good BER at high speeds. Various networking devices
which support 25G/40G/100G provides ability to manage supported FEC
modes and the lack of FEC encoding control and reporting today is a
source for interoperability issues for many vendors.
FEC capability as well as specific FEC mode i.e. Base-R
or RS modes can be requested or advertised through bits D44:47 of
base link codeword.
This patch set intends to provide option under ethtool to manage
and report FEC encoding settings for networking devices as per
IEEE 802.3 bj, bm and by specs.
set-fec/show-fec option(s) are designed to provide control and
report the FEC encoding on the link.
SET FEC option:
root@tor: ethtool --set-fec swp1 encoding [off | RS | BaseR | auto]
Encoding: Types of encoding
Off : Turning off any encoding
RS : enforcing RS-FEC encoding on supported speeds
BaseR : enforcing Base R encoding on supported speeds
Auto : IEEE defaults for the speed/medium combination
Here are a few examples of what we would expect if encoding=auto:
- if autoneg is on, we are expecting FEC to be negotiated as on or off
as long as protocol supports it
- if the hardware is capable of detecting the FEC encoding on it's
receiver it will reconfigure its encoder to match
- in absence of the above, the configuration would be set to IEEE
defaults.
>From our understanding , this is essentially what most hardware/driver
combinations are doing today in the absence of a way for users to
control the behavior.
SHOW FEC option:
root@tor: ethtool --show-fec swp1
FEC parameters for swp1:
Active FEC encodings: RS
Configured FEC encodings: RS | BaseR
ETHTOOL DEVNAME output modification:
ethtool devname output:
root@tor:~# ethtool swp1
Settings for swp1:
root@hpe-7712-03:~# ethtool swp18
Settings for swp18:
Supported ports: [ FIBRE ]
Supported link modes: 40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: [RS | BaseR | None | Not reported]
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: [RS | BaseR | None | Not reported]
<<<< One or more FEC modes
Speed: 100000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 106
Transceiver: internal
Auto-negotiation: off
Link detected: yes
This patch includes following changes
a) New ETHTOOL_SFECPARAM/SFECPARAM API, handled by
the new get_fecparam/set_fecparam callbacks, provides support
for configuration of forward error correction modes.
b) Link mode bits for FEC modes i.e. None (No FEC mode), RS, BaseR/FC
are defined so that users can configure these fec modes for supported
and advertising fields as part of link autonegotiation.
Signed-off-by: Vidya Sagar Ravipati <vidya.chowdary@gmail.com>
Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently blktrace isn't cgroup aware. blktrace prints out task name of
current context, but the task of current context isn't always in the
cgroup where the BIO comes from. We can't use task name to find out IO
cgroup. For example, Writeback BIOs always comes from flusher thread but
the BIOs are for different blk cgroups. Request could be requeued and
dispatched from completely different tasks. MD/DM are another examples.
This patch tries to fix the gap. We print out cgroup fhandle info in
blktrace. Userspace can use open_by_handle_at() syscall to find the
cgroup by fhandle. Or userspace can use name_to_handle_at() syscall to
find fhandle for a cgroup and use a BPF program to filter out blktrace
for a specific cgroup.
We add a new 'blk_cgroup' trace option for blk tracer. It's default off.
Application which doesn't know the new option isn't affected. When it's
on, we output fhandle info right after blk_io_trace with an extra bit
set in event action. So from application point of view, blktrace with
the option will output new actions.
I didn't change blk trace event yet, since I'm not sure if changing the
trace event output is an ABI issue. If not, I'll do it later.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is helpful for 'nft monitor' to track which process caused a given
change to the ruleset.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move the protocol description header file into net/rxrpc/ and rename it to
protocol.h. It's no longer necessary to expose it as packets are no longer
exposed to kernel services (such as AFS) that use the facility.
The abort codes are transferred to the UAPI header instead as we pass these
back to userspace and also to kernel services.
Signed-off-by: David Howells <dhowells@redhat.com>
Move UAPI definitions from the internal header and place them in a UAPI
header file so that userspace can make use of them.
Signed-off-by: David Howells <dhowells@redhat.com>
It is often useful to know the branch types while analyzing branch data.
For example, a call is very different from a conditional branch.
Currently we have to look it up in binary while the binary may later not
be available and even the binary is available but user has to take some
time. It is very useful for user to check it directly in perf report.
Perf already has support for disassembling the branch instruction to get
the x86 branch type.
To keep consistent on kernel and userspace and make the classification
more common, the patch adds the common branch type classification
in perf_event.h.
The patch only defines a minimum but most common set of branch types.
PERF_BR_UNKNOWN : unknown
PERF_BR_COND ：conditional
PERF_BR_UNCOND : unconditional
PERF_BR_IND : indirect
PERF_BR_CALL : function call
PERF_BR_IND_CALL : indirect function call
PERF_BR_RET : function return
PERF_BR_SYSCALL : syscall
PERF_BR_SYSRET : syscall return
PERF_BR_COND_CALL : conditional function call
PERF_BR_COND_RET : conditional function return
The patch also adds a new field type (4 bits) in perf_branch_entry
to record the branch type.
Since the disassembling of branch instruction needs some overhead,
a new PERF_SAMPLE_BRANCH_TYPE_SAVE is introduced to indicate if it
needs to disassemble the branch instruction and record the branch
type.
Change log:
v10: Not changed.
v9: Not changed.
v8: Change PERF_BR_NONE to PERF_BR_UNKNOWN.
No other change.
v7: Just keep the most common branch types.
Others are removed.
v6: Not changed.
v5: Not changed. The v5 patch series just change the userspace.
v4: Comparing to previous version, the major changes are:
1. Remove the PERF_BR_JCC_FWD/PERF_BR_JCC_BWD, they will be
computed later in userspace.
2. Remove the "cross" field in perf_branch_entry. The cross page
computing will be done later in userspace.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1500379995-6449-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event handling was always fairly simplistic since there were only
two events. With the addition of pin events this needed to be redesigned.
The state_change and lost_msgs events are now core events with the
guarantee that the last state is always available. The new pin events
are a queue of events (up to 64 for each event) and the oldest event
will be dropped if the application cannot keep up. Lost events are
marked with a new event flag.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for low-level CEC pin monitoring. This adds a new monitor
mode, a new capability and two new events.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Implement serial console driver to complement earlycon.
Based on LeMaker linux-actions tree.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB spec says that multiple byte fields are stored in
little-endian order (see chapter 8.1 of USB2.0 spec and
chapter 7.1 of USB3.0 spec), thus mark such fields as LE
for UAC1 and UAC2 headers
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
BPF programs can use the devmap with a bpf_redirect_map() helper
routine to forward packets to netdevice in map.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device map (devmap) is a BPF map, primarily useful for networking
applications, that uses a key to lookup a reference to a netdevice.
The map provides a clean way for BPF programs to build virtual port
to physical port maps. Additionally, it provides a scoping function
for the redirect action itself allowing multiple optimizations. Future
patches will leverage the map to provide batching at the XDP layer.
Another optimization/feature, that is not yet implemented, would be
to support multiple netdevices per key to support efficient multicast
and broadcast support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for a bpf_redirect helper function to the XDP
infrastructure. For now this only supports redirecting to the egress
path of a port.
In order to support drivers handling a xdp_buff natively this patches
uses a new ndo operation ndo_xdp_xmit() that takes pushes a xdp_buff
to the specified device.
If the program specifies either (a) an unknown device or (b) a device
that does not support the operation a BPF warning is thrown and the
XDP_ABORTED error code is returned.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Common:
- add uevents for VM creation/destruction
- annotate and properly access RCU-protected objects
s390:
- rename IOCTL added in the first v4.13 merge
x86:
- emulate VMLOAD VMSAVE feature in SVM
- support paravirtual asynchronous page fault while nested
- add Hyper-V userspace interfaces for better migration
- improve master clock corner cases
- extend internal error reporting after EPT misconfig
- correct single-stepping of emulated instructions in SVM
- handle MCE during VM entry
- fix nVMX VM entry checks and nVMX VMCS shadowing
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJZaOm6AAoJEED/6hsPKofoqO8H/3breVIyVv9mwg7A5+o+6LTq
GzV/YXHSC8NtfxZn8ViS/TCziYiBSFv7XiPSodkXbOgYSz8Yya5x9D+dbEH+xgG7
l+LsZEqdSFbHCkvKrMiwSsoXtsT5WygA56+KZiBmu8cvlwqSyXWHFn3ZJ1wKzGq/
zivlkfCoh2m6bGdNmrG9pHUSgxvDh94pXesaVBKy4hgeovY1qjzby3Lo+HuIUzai
exuEU1EKRlUIfLK1B2Anp5IIv5Q1lFnMSvD6YSiWYywZb95dN/adsX1bv+MKeOdt
TIAgotsWjaAuT9JolAJjfVPHG0+uMBMsWg4Zh9Ra/gPPaSh3KEC2h1++zEYKjvw=
=1zII
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Radim Krčmář:
"Second batch of KVM updates for v4.13
Common:
- add uevents for VM creation/destruction
- annotate and properly access RCU-protected objects
s390:
- rename IOCTL added in the first v4.13 merge
x86:
- emulate VMLOAD VMSAVE feature in SVM
- support paravirtual asynchronous page fault while nested
- add Hyper-V userspace interfaces for better migration
- improve master clock corner cases
- extend internal error reporting after EPT misconfig
- correct single-stepping of emulated instructions in SVM
- handle MCE during VM entry
- fix nVMX VM entry checks and nVMX VMCS shadowing"
* tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
kvm: x86: hyperv: make VP_INDEX managed by userspace
KVM: async_pf: Let guest support delivery of async_pf from guest mode
KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf
KVM: async_pf: Add L1 guest async_pf #PF vmexit handler
KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list
kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2
KVM: x86: make backwards_tsc_observed a per-VM variable
KVM: trigger uevents when creating or destroying a VM
KVM: SVM: Enable Virtual VMLOAD VMSAVE feature
KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition
KVM: SVM: Rename lbr_ctl field in the vmcb control area
KVM: SVM: Prepare for new bit definition in lbr_ctl
KVM: SVM: handle singlestep exception when skipping emulated instructions
KVM: x86: take slots_lock in kvm_free_pit
KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition
kvm: vmx: Properly handle machine check during VM-entry
KVM: x86: update master clock before computing kvmclock_offset
kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields
kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls
kvm: nVMX: Validate the I/O bitmaps on nested VM-entry
...
