mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2026-01-17 05:05:00 +00:00
4dae8c047a
10221 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Marvin Lin
|
d62d8e7b59 |
media: v4l: Add HEXTILE compressed format
Add HEXTILE compressed format which is defined in Remote Framebuffer Protocol (RFC 6143, chapter 7.7.4 Hextile Encoding) and is used by Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs. Signed-off-by: Marvin Lin <milkfafa@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> |
||
|
Eric Biggers
|
5b11888471 |
fscrypt: support crypto data unit size less than filesystem block size
Until now, fscrypt has always used the filesystem block size as the granularity of file contents encryption. Two scenarios have come up where a sub-block granularity of contents encryption would be useful: 1. Inline crypto hardware that only supports a crypto data unit size that is less than the filesystem block size. 2. Support for direct I/O at a granularity less than the filesystem block size, for example at the block device's logical block size in order to match the traditional direct I/O alignment requirement. (1) first came up with older eMMC inline crypto hardware that only supports a crypto data unit size of 512 bytes. That specific case ultimately went away because all systems with that hardware continued using out of tree code and never actually upgraded to the upstream inline crypto framework. But, now it's coming back in a new way: some current UFS controllers only support a data unit size of 4096 bytes, and there is a proposal to increase the filesystem block size to 16K. (2) was discussed as a "nice to have" feature, though not essential, when support for direct I/O on encrypted files was being upstreamed. Still, the fact that this feature has come up several times does suggest it would be wise to have available. Therefore, this patch implements it by using one of the reserved bytes in fscrypt_policy_v2 to allow users to select a sub-block data unit size. Supported data unit sizes are powers of 2 between 512 and the filesystem block size, inclusively. Support is implemented for both the FS-layer and inline crypto cases. This patch focuses on the basic support for sub-block data units. Some things are out of scope for this patch but may be addressed later: - Supporting sub-block data units in combination with FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64, in most cases. Unfortunately this combination usually causes data unit indices to exceed 32 bits, and thus fscrypt_supported_policy() correctly disallows it. The users who potentially need this combination are using f2fs. To support it, f2fs would need to provide an option to slightly reduce its max file size. - Supporting sub-block data units in combination with FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32. This has the same problem described above, but also it will need special code to make DUN wraparound still happen on a FS block boundary. - Supporting use case (2) mentioned above. The encrypted direct I/O code will need to stop requiring and assuming FS block alignment. This won't be hard, but it belongs in a separate patch. - Supporting this feature on filesystems other than ext4 and f2fs. (Filesystems declare support for it via their fscrypt_operations.) On UBIFS, sub-block data units don't make sense because UBIFS encrypts variable-length blocks as a result of compression. CephFS could support it, but a bit more work would be needed to make the fscrypt_*_block_inplace functions play nicely with sub-block data units. I don't think there's a use case for this on CephFS anyway. Link: https://lore.kernel.org/r/20230925055451.59499-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Jiri Olsa
|
3acf8ace68 |
bpf: Add missed value to kprobe perf link info
Add missed value to kprobe attached through perf link info to hold the stats of missed kprobe handler execution. The kprobe's missed counter gets incremented when kprobe handler is not executed due to another kprobe running on the same cpu. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org |
||
|
Jiri Olsa
|
e2b2cd592a |
bpf: Add missed value to kprobe_multi link info
Add missed value to kprobe_multi link info to hold the stats of missed kprobe_multi probe. The missed counter gets incremented when fprobe fails the recursion check or there's no rethook available for return probe. In either case the attached bpf program is not executed. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Song Liu <song@kernel.org> Reviewed-by: Song Liu <song@kernel.org> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20230920213145.1941596-3-jolsa@kernel.org |
||
|
Vinayak Yadawad
|
5482c0a28b |
wifi: cfg80211: OWE DH IE handling offload
Introduce new feature flags for OWE offload that driver can advertise to indicate kernel/application space to avoid DH IE handling. When this flag is advertised, the driver/device will take care of DH IE inclusion and processing of peer DH IE to generate PMK. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Link: https://lore.kernel.org/r/f891cce4b52c939dfc6b71bb2f73e560e8cad287.1695374530.git.vinayak.yadawad@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Alejandro Colomar
|
ff7a65492c |
elf, uapi: Remove struct tag 'dynamic'
Such a generic struct tag shouldn't have been exposed in a public header. Since it's undocumented, we can assume it's a historical accident. And since no software (at least on Debian) relies on this tag, we can safely remove it. Here are the results of a Debian Code Search[1]: $ # packages that contain 'include [<"]linux/elf\.h[">]' $ curl -s https://codesearch.debian.net/results/e5e7c74dfcdae609/packages.txt > include $ # packages that contain '\bstruct dynamic\b' $ curl -s https://codesearch.debian.net/results/b23577e099048c6a/packages.txt > struct $ cat struct include | sort | uniq -d chromium hurd linux qemu qt6-webengine qtwebengine-opensource-src $ # chromium: Seems to hold a copy of the UAPI header. No uses of the tag. $ # hurd: Same thing as chromium. $ # linux: :) $ # qemu: Same thing as chromium. $ # qt6-webengine: Same thing as all. $ # qtwebengine-opensource-src: Yet another copy. Link: https://codesearch.debian.net/ [1] Link: https://lore.kernel.org/linux-mm/87wmxdokum.fsf@email.froward.int.ebiederm.org/T/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Rolf Eike Beer <eb@emlix.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Alejandro Colomar <alx@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Jonathan Cameron
|
431dffc1df |
Merge branch 'ib-iio-hid-sensors-v6.6-rc1' into togreg
The deta angle and deta velocity channels were added in parallel with color temperature and chromacity so this merge had to assign a consistent order. I put the color related ones second. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Basavaraj Natikar
|
06790d4c69 |
iio: Add channel type for chromaticity
In most cases, ambient color sensors also support the x and y light colors, which represent the coordinates on the CIE 1931 chromaticity diagram. Thus, add channel type for chromaticity. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/r/20230919081054.2050714-7-Basavaraj.Natikar@amd.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Basavaraj Natikar
|
42f3117511 |
iio: Add channel type light color temperature
In most cases, ambient color sensors also support light color temperature, which is measured in kelvin. Thus, add channel type light color temperature. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/r/20230919081054.2050714-3-Basavaraj.Natikar@amd.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Linus Torvalds
|
d90b0276af |
hardening fixes for v6.6-rc3
- Fix UAPI stddef.h to avoid C++-ism (Alexey Dobriyan) - Fix harmless UAPI stddef.h header guard endif (Alexey Dobriyan) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmUNx3UWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJripEACPpzkqlF2ui0orCA/Sfvx1xTbF 7IMKtIavjjSkXXQBRK5wfUUkiWC27pr8m6+JhHum/K7UmLSFoG6eDNeLDI8LW/Wv te+acDjWs2MrAViWcQJvN+iI4VSBrx+YWqHHpzFG1NTXdkw+CYEDdiP7Rx83IJYs 7Xfq9sfCkAVzWd/OKUHQLreYym+U1EzduhRVfXcq+JgpFQ7845rG1Ednx5Zy55So spPK828lKBICOC7gBJEVZFk/VEJBGe3jfR0rWB1sj3SxLwz1xp2mGUvxN9umawb8 8XX0WsR84voodv/E85CFZcKqZ4mvwz0duXz7a2fvSQB6gN4TpZ5WD2bkweNKz86I LcTfz1NX8eZoVqEwMNodXBtirjShPwjG7iteiOJX17ENk6C70+CQorm/5Ahi229e fPe8IEEez8PPvZooCnipu9fE1JX0rrRF8Nhmz+gW+Gc7pa7g3Z2lArsxPsGqZs0A c6Y1AnOkGCuukYUJWd/V1ILu6DZLcZosydPO6VOQ3jOxPsaxMT3e0e3SnZyEMYh0 qG2HiagklTshjxY7FjEH7crkQIL4A9jVYDbVT2HlGU8rb73a1HlNzoEugq98Zmw2 Wx0iPP+VtbDOUGyhAjs2Tck2771UclpJnrIL79+dWhhHzScNUWnLHH4Htr7Bo5tw L1u/wU1NEmCI4+6/8Q== =z2Qi -----END PGP SIGNATURE----- Merge tag 'hardening-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Fix UAPI stddef.h to avoid C++-ism (Alexey Dobriyan) - Fix harmless UAPI stddef.h header guard endif (Alexey Dobriyan) * tag 'hardening-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: uapi: stddef.h: Fix __DECLARE_FLEX_ARRAY for C++ uapi: stddef.h: Fix header guard location |
||
|
Paolo Abeni
|
e9cbc89067 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jens Axboe
|
f31ecf671d |
io_uring: add IORING_OP_WAITID support
This adds support for an async version of waitid(2), in a fully async version. If an event isn't immediately available, wait for a callback to trigger a retry. The format of the sqe is as follows: sqe->len The 'which', the idtype being queried/waited for. sqe->fd The 'pid' (or id) being waited for. sqe->file_index The 'options' being set. sqe->addr2 A pointer to siginfo_t, if any, being filled in. buf_index, add3, and waitid_flags are reserved/unused for now. waitid_flags will be used for options for this request type. One interesting use case may be to add multi-shot support, so that the request stays armed and posts a notification every time a monitored process state change occurs. Note that this does not support rusage, on Arnd's recommendation. See the waitid(2) man page for details on the arguments. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
fc68fcda04 |
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
This behaves like IORING_OP_READ, except: 1) It only supports pollable files (eg pipes, sockets, etc). Note that for sockets, you probably want to use recv/recvmsg with multishot instead. 2) It supports multishot mode, meaning it will repeatedly trigger a read and fill a buffer when data is available. This allows similar use to recv/recvmsg but on non-sockets, where a single request will repeatedly post a CQE whenever data is read from it. 3) Because of #2, it must be used with provided buffers. This is uniformly true across any request type that supports multishot and transfers data, with the reason being that it's obviously not possible to pass in a single buffer for the data, as multiple reads may very well trigger before an application has a chance to process previous CQEs and the data passed from them. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
peterz@infradead.org
|
d6d08d2479 |
futex: Extend the FUTEX2 flags
Add the definition for the missing but always intended extra sizes, and add a NUMA flag for the planned numa extention. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://lore.kernel.org/r/20230921105247.617057368@noisy.programming.kicks-ass.net |
||
|
peterz@infradead.org
|
4923954bbc |
futex: Clarify FUTEX2 flags
sys_futex_waitv() is part of the futex2 series (the first and only so far) of syscalls and has a flags field per futex (as opposed to flags being encoded in the futex op). This new flags field has a new namespace, which unfortunately isn't super explicit. Notably it currently takes FUTEX_32 and FUTEX_PRIVATE_FLAG. Introduce the FUTEX2 namespace to clarify this Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://lore.kernel.org/r/20230921105247.507327749@noisy.programming.kicks-ass.net |
||
|
David Francis
|
5f248462c6 |
drm/amdgpu: Add EXT_COHERENT memory allocation flags
These flags (for GEM and SVM allocations) allocate memory that allows for system-scope atomic semantics. On GFX943 these flags cause caches to be avoided on non-local memory. On all other ASICs they are identical in functionality to the equivalent COHERENT flags. Corresponding Thunk patch is at https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88 Reviewed-by: David Yat Sin <David.YatSin@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Andy Shevchenko
|
2ff477b782 |
serial: 8250_port: Introduce UART_IIR_FIFO_ENABLED_16750
The UART_IIR_64BYTE_FIFO is always being used in conjunction with UART_IIR_FIFO_ENABLED. Introduce a joined UART_IIR_FIFO_ENABLED_16750 definition and use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230911144308.4169752-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Wen Gong
|
ddd7f45c89 |
wifi: cfg80211: save power spectral density(psd) of regulatory rule
6 GHz regulatory domains introduces Power Spectral Density (PSD). The PSD value of the regulatory rule should be taken into effect for the ieee80211_channels falling into that particular regulatory rule. Save the values in the channel which has PSD value and add nl80211 attributes accordingly to handle it. Co-developed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230914082026.3709-1-quic_wgong@quicinc.com [use hole in chan flags, reword docs] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
David S. Miller
|
685c6d5b2c |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 79 files changed, 5275 insertions(+), 600 deletions(-). The main changes are: 1) Basic BTF validation in libbpf, from Andrii Nakryiko. 2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi. 3) next_thread cleanups, from Oleg Nesterov. 4) Add mcpu=v4 support to arm32, from Puranjay Mohan. 5) Add support for __percpu pointers in bpf progs, from Yonghong Song. 6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang. 7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman", Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle), Song Liu, Stanislav Fomichev, Yonghong Song ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jiri Pirko
|
0b7a2721e3 |
devlink: expose peer SF devlink instance
Introduce a new helper devl_port_fn_devlink_set() to be used by driver assigning a devlink instance to the peer devlink port function. Expose this to user over new netlink attribute nested under port function nest to expose devlink handle related to the port function. This is particularly helpful for user to understand the relationship between devlink instances created for SFs and the port functions they belong to. Note that caller of devlink_port_notify() needs to hold devlink instance lock, put the assertion to devl_port_fn_devlink_set() to make this requirement explicit. Also note the limitations that only allow to make this assignment for registered objects. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jiri Pirko
|
5f18426928 |
netdev: expose DPLL pin handle for netdevice
In case netdevice represents a SyncE port, the user needs to understand the connection between netdevice and associated DPLL pin. There might me multiple netdevices pointing to the same pin, in case of VF/SF implementation. Add a IFLA Netlink attribute to nest the DPLL pin handle, similar to how it is implemented for devlink port. Add a struct dpll_pin pointer to netdev and protect access to it by RTNL. Expose netdev_dpll_pin_set() and netdev_dpll_pin_clear() helpers to the drivers so they can set/clear the DPLL pin relationship to netdev. Note that during the lifetime of struct dpll_pin the pin handle does not change. Therefore it is save to access it lockless. It is drivers responsibility to call netdev_dpll_pin_clear() before dpll_pin_put(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vadim Fedorenko
|
3badff3a25 |
dpll: spec: Add Netlink spec in YAML
Add a protocol spec for DPLL. Add code generated from the spec. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Aananth V
|
3868ab0f19 |
tcp: new TCP_INFO stats for RTO events
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
David S. Miller
|
1612cc4b14 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 450 insertions(+), 36 deletions(-). The main changes are: 1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao. 2) Check whether override is allowed in kprobe mult, from Jiri Olsa. 3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick. 4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann, Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor, Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Stanislav Fomichev
|
a9c2a60854 |
bpf: expose information about supported xdp metadata kfunc
Add new xdp-rx-metadata-features member to netdev netlink which exports a bitmask of supported kfuncs. Most of the patch is autogenerated (headers), the only relevant part is netdev.yaml and the changes in netdev-genl.c to marshal into netlink. Example output on veth: $ ip link add veth0 type veth peer name veth1 # ifndex == 12 $ ./tools/net/ynl/samples/netdev 12 Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12 veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0 Cc: netdev@vger.kernel.org Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
Alexey Dobriyan
|
32a4ec211d |
uapi: stddef.h: Fix __DECLARE_FLEX_ARRAY for C++
__DECLARE_FLEX_ARRAY(T, member) macro expands to
struct {
struct {} __empty_member;
T member[];
};
which is subtly wrong in C++ because sizeof(struct{}) is 1 not 0,
changing UAPI structures layouts.
This can be fixed by expanding to
T member[];
Now g++ doesn't like "T member[]" either, throwing errors on
the following code:
struct S {
union {
T1 member1[];
T2 member2[];
};
};
or
struct S {
T member[];
};
Use "T member[0];" which seems to work and does the right thing wrt
structure layout.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes:
|
||
|
Alexey Dobriyan
|
531108ec5b |
uapi: stddef.h: Fix header guard location
The #endif for the header guard wasn't at the end of the header. This
was harmless since the define that escaped was already testing for its
own redefinition. Regardless, move the #endif to the correct place.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes:
|
||
|
Aloka Dixit
|
0cfaec2599 |
wifi: nl80211: fixes to FILS discovery updates
Add a new flag 'update' which is set to true during start_ap() if (and only if) one of the following two conditions are met: - Userspace passed an empty nested attribute which indicates that the feature should be disabled and templates deleted. - Userspace passed all the parameters for the nested attribute. Existing configuration will not be changed while the flag remains false. Add similar changes for unsolicited broadcast probe response transmission. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230727174100.11721-2-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Johannes Berg
|
5add321c32 |
wifi: cfg80211: remove scan_width support
There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Ramona Bolboaca
|
94a39f2c44 |
iio: Add IIO_DELTA_VELOCITY channel type
The delta velocity is defined as a piece-wise integration of acceleration data. The delta velocity represents the linear velocity change between two consecutive measurements and it is measured in m / s (meters per second). In order to track the total linear velocity change during a desired period of time, simply sum-up the delta velocity samples acquired during that time. IIO currently does not offer a suitable channel type for this type of measurements hence this patch adds it. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230808075059.645525-3-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Ramona Bolboaca
|
744f4990ee |
iio: Add IIO_DELTA_ANGL channel type
The delta angle is defined as a piece-wise integration of angular velocity data. The delta angle represents the amount of angular displacement between two consecutive measurements and it is measured in radians. In order to track the total angular displacement during a desired period of time, simply sum-up the delta angle samples acquired during that time. IIO currently does not offer a suitable channel type for this type of measurements hence this patch adds it. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230808075059.645525-2-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Stanislav Fomichev
|
7cb779a686 |
bpf: Clarify error expectations from bpf_clone_redirect
Commit
|
||
|
Linus Torvalds
|
1b37a0a2d4 |
RISC-V Patches for the 6.6 Merge Window, Part 2 (try 2)
* The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. * Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. * Support for the V extension in ptrace(), again. * Support for KASLR. * Support for the BPF prog pack allocator in RISC-V. * A handful of bug fixes and cleanups. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmT8eV0THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiQYTD/9V6asKMDdWUV+gti/gRvJsiYUjIrrK h4MB8hL3fHfCLBpTD4rU6K1Gx6hzPjGsxIuQyAq/hf752KB/9XUiIVziRBv2ZEBb GuTFCXfg0QXBUlxBZzFw5SKUuKXgRaMAQ14qjy3tfLk31YMQmBtAlEPdDM8mZOCQ zNI3bbdn6zASeaSMh7hwBoOJWP2ACoOEW7RcD44EDT8jb3YW5rEF86x0XtYLgJb6 xhaR4ieIdaOLxz2RbjXj0GcPIBfhTxZbwN3fLlD8PxuGqCKn5kN03bPPwP9tMTAc z02EgVcSDvJWpYikuuTkPMxpSi18OZPJ6eriwOv5ccP5NXQScO09iGo7IZEM7OzO j1IrIXyncU4BhxlpWombU454Va+ezUlfh9uh+MrJ+Bnve3T3S9ax7AV4S8vkJZlT bnmJVS/g7L/7nxTQdJ3zoAo2WzFQXL0C8SR5tGo/3aRk0uYoliHy/W419f55F9GZ rFcc+LMqai8N4bLN3whaK0NnuodNWHoNlpcd/5ncJwecswuDkah3LWcd4rwBrWhu 8RIkIfpdr/vTQjUVXVLeMHdKB+lST3iF1feMqJj0PfTyvTZi5yfSppjAfkAdVq+9 lHqAjsaGdiCrOtLxb0oBR2PTDQPAm2gN2meuSMommDQR6Vul8K5WcQml9Zx9QEWA eDXWYDZISKYJbA== =s89m -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. - Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. - Support for the V extension in ptrace(), again. - Support for KASLR. - Support for the BPF prog pack allocator in RISC-V. - A handful of bug fixes and cleanups. * tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits) soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled bpf, riscv: use prog pack allocator in the BPF JIT riscv: implement a memset like function for text riscv: extend patch_text_nosync() for multiple pages bpf: make bpf_prog_pack allocator portable riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR RISC-V: Add ptrace support for vectors soc: renesas: Kconfig: Select the required configs for RZ/Five SoC cache: Add L2 cache management for Andes AX45MP RISC-V core dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller riscv: mm: dma-noncoherent: nonstandard cache operations support riscv: errata: Add Andes alternative ports riscv: asm: vendorid_list: Add Andes Technology to the vendors list ... |
||
|
Palmer Dabbelt
|
f093636354
|
Merge patch "RISC-V: Add ptrace support for vectors"
This resurrects the vector ptrace() support that was removed for 6.5 due to some bugs cropping up as part of the GDB review process. * b4-shazam-merge: RISC-V: Add ptrace support for vectors Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Yonghong Song
|
9bc95a95ab |
bpf: Mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr' can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated. Also make changes in selftests/bpf/test_bpftool_synctypes.py and selftest libbpf_str to fix otherwise test errors. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
73be7fb14e |
Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
|
||
|
Phil Sutter
|
fdc04cc2d5 |
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
Add a brief description to the enum's comment.
Fixes:
|
||
|
Linus Torvalds
|
9e310ea5c8 |
fuse update for 6.6
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZPYlzAAKCRDh3BK/laaZ PEcxAP4suFAlonGntKJ5ltR+7ZN+WYdiraQ+5c6ISBFc+pFXgQD7B0xhztV4umSF III+pbD6lE5gP5u7+Kw/pOnTI42yTQ8= =aPjn -----END PGP SIGNATURE----- Merge tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Revert non-waiting FLUSH due to a regression - Fix a lookup counter leak in readdirplus - Add an option to allow shared mmaps in no-cache mode - Add btime support and statx intrastructure to the protocol - Invalidate positive/negative dentry on failed create/delete * tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: conditionally fill kstat in fuse_do_statx() fuse: invalidate dentry on EEXIST creates or ENOENT deletes fuse: cache btime fuse: implement statx fuse: add ATTR_TIMEOUT macro fuse: add STATX request fuse: handle empty request_mask in statx fuse: write back dirty pages before direct write in direct_io_relax mode fuse: add a new fuse init flag to relax restrictions in no cache mode fuse: invalidate page cache pages before direct write fuse: nlookup missing decrement in fuse_direntplus_link Revert "fuse: in fuse_flush only wait if someone wants the return code" |
||
|
Linus Torvalds
|
3d904704c8 |
rpmsg updates for v6.6
Add support for the GLINK flow control signals, and expose this to the user through the rpmsg_char interface. Add missing kstrdup() failure handling during allocation of GLINK channel objects. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmT1/ygVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FGZIQAKT+VxWzqLDqUxqjgbvvHOloGwfy NfINvbS//OTC7wVInf8PbjXRUflwxK8j5gcOhnZgfohJM2jOdzO1+hh+A0JPTplj VKxNs1U+vbV/bviRDQoJ5RvBDPzfghMFA18L6QmGiRDeTjc7bAW/ZcEu6qTvvBAF wYr1zi/F7Dg1me6JkZWbjFg8P9dhYM9MsnAHB6sBsWvvOA9LRsfkheu/ihC4hZwg S6elviM/rIJ0D35LBdnSDqCULzXdz/kBgI1lpYlJLeuBJTzOEn51efkbyuRN9xfW llEMBZqelAEl+qy8qCTA523HxFRzg6FtLvBbOhbgxnm2Z6J9NEs+elJ4Oe+oDieQ 5elfISrCJ2gSwV/QmaRr/HTXbh9nNAvEpyn2Z1szRGny1kZJGXx0eQj27SlGJSrX GJkbJlzjmOrQUrSl3MOOr2NJCgIMIIDRQQuiz6fg10oMlcYDp7k+vH0wfR90aypO 187Ze1mSGPsdm19kVObbcGCYlXjVYnqGSpNu/0BSwrdib6skT8qVrzAzRrjC4f1I XsOLe56/VTvRmGWVn1GCbkgA39k7KwVIzUqETbty7mKZHHeJH1mzkzP+XkMQQrTc 3ImGT9gOTSz5ht4XA6+KMicoS5HWxhi7XLGdlYxlzKTcVo6sTElcVpMdtdimCjyB MsiKKNa+ns1NUtO+ =liDV -----END PGP SIGNATURE----- Merge tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: "Add support for the GLINK flow control signals, and expose this to the user through the rpmsg_char interface. Add missing kstrdup() failure handling during allocation of GLINK channel objects" * tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: glink: Avoid dereferencing NULL channel rpmsg: glink: Add check for kstrdup rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support rpmsg: glink: Add support to handle signals command rpmsg: core: Add signal API support |
||
|
Linus Torvalds
|
e4f1b8202f |
virtio: features
a small pull request this time around, mostly because the vduse network got postponed to next relase so we can be sure we got the security store right. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmT1BMAPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpYJUH+QHNhfn0JC/yE1IySwDwpmdgr73aaGik1LgV ObHi48ucRMtxB+QpXLjPWAlQhVVzZv1wBK+Up9QxW8e9USJrSeI/MWfoHtXOFnGe 1JdmNr+XQM/uDngZ+mjI4ZUwRkA61iOcTR7gEDdfBUOr+Yl6R7Na/+kKtTDiDMfy O8bOCLYVyJNiny2eSMmXH0mb4oPplkne4PzW4i/+ssKNoHlBmUIcx0jqj/qUVpSR ozr0SpyhlXKSEQGAtNxwR4PONeMDOOdkRBhxHW5N5QgnP9P7HQ57Ar39Vz7+Kc0i 6vO2g1gpYV1naQr9BCg8hIF9r68rjgi4IOSghmfpWWUL0yNURtU= =z/Df -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "A small pull request this time around, mostly because the vduse network got postponed to next relase so we can be sure we got the security store right" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: fix avail_wrap_counter in virtqueue_add_packed virtio_vdpa: build affinity masks conditionally virtio_net: merge dma operations when filling mergeable buffers virtio_ring: introduce dma sync api for virtqueue virtio_ring: introduce dma map api for virtqueue virtio_ring: introduce virtqueue_reset() virtio_ring: separate the logic of reset/enable from virtqueue_resize virtio_ring: correct the expression of the description of virtqueue_resize() virtio_ring: skip unmap for premapped virtio_ring: introduce virtqueue_dma_dev() virtio_ring: support add premapped buf virtio_ring: introduce virtqueue_set_dma_premapped() virtio_ring: put mapping error check in vring_map_one_sg virtio_ring: check use_dma_api before unmap desc for indirect vdpa_sim: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK vdpa: add get_backend_features vdpa operation vdpa: accept VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature vdpa: add VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK flag vdpa/mlx5: Remove unused function declarations |
||
|
Eugenio Pérez
|
8b59b4da9b |
vdpa: add VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK flag
This feature flag allows the driver enabling virtqueues both before and after DRIVER_OK. This is needed for software assisted live migration, so userland can restore the device status in devices with control virtqueue before the dataplane is enabled. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230609092127.170673-2-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Linus Torvalds
|
7716f383a5 |
cgroup: Changes for v6.6
* Per-cpu cpu usage stats are now tracked. This currently isn't printed out
in the cgroupfs interface and can only be accessed through e.g. BPF.
Should decide on a not-too-ugly way to show per-cpu stats in cgroupfs.
* cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be created
below non-partition parents, which should ease the management of partition
cpusets.
* A lot of code and documentation cleanup patches.
* tools/testing/selftests/cgroup/test_cpuset.c is added. This causes trivial
conflicts in .gitignore and Makefile under the directory against
|
||
|
Andy Chiu
|
9300f00439
|
RISC-V: Add ptrace support for vectors
This patch add back the ptrace support with the following fix:
- Define NT_RISCV_CSR and re-number NT_RISCV_VECTOR to prevent
conflicting with gdb's NT_RISCV_CSR.
- Use struct __riscv_v_regset_state to handle ptrace requests
Since gdb does not directly include the note description header in
Linux and has already defined NT_RISCV_CSR as 0x900, we decide to
sync with gdb and renumber NT_RISCV_VECTOR to solve and prevent future
conflicts.
Fixes:
|
||
|
Linus Torvalds
|
307d59039f |
media updates for v6.6-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmTxzmEACgkQCF8+vY7k 4RWP6A/+Ljbwdoq92qOcaKAG2h2HzJa/H+xKMQwqIYjpbXnjNuFD2S9FCRfhNa9b Pt4K2g4lH2IJvYiJ3qhBbMxV8GPmovnHFX5LvyTFpRmrtZBAKp+TPXpbPt+a2/WL IPfQ0I52/c/JNqhm3fnmKgpXorp0wHYNbfY/LXztslimZj95+t0qjW62BoBmsJ3s hR+j/Xlgnd+9gld1OqX6OndH3mpeqDzBl4KZatQzw6yuIo8SK0ASEpu/vzgZoVy+ WiBtbzMuta2ZghnEHbnCkurwBSU/oLXhBmXsgp+Zdy0gglSk1RBdxM+3O65OVQt3 CCWSXMS0vGOk6JiogMpcPzO5piaUePcHEIjgAaaepTOzbKaf6PbEd9dj73LT9qcx 4TYFtGaDDhyDU4nzKTngfNiwmYrL1h+NuG119ZLHfrdH3MT7itIaydwFJRqLC+6D 7K6/1H2LKq25i+hRp5ZK2pgv0dAJw/nSdwFGFVgWM3Tuyt5dGdL/4SlZO4nIFKF2 pPWJUTJJP/0t9GUtwWmCh1fdgDr0A6Zg5M2OduyhC/YkqyLuD/02Bb4aR8hzloPj pym+94/PFaT5S7zvKywpvyIc8U+87/M2tw+mAPN2r3i4c0RFJa7CkyKqlKTKFw13 jw7NLLlrRbZ3a3zlhpJVqGLKgF2FlWudLUo4Y4kddWvxTMbwYXs= =yuz5 -----END PGP SIGNATURE----- Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913 - new Intel IVSC MEI drivers - some Mediatek platform drivers were moved to a common location - Intel atomisp2 driver is now working with the main ov2680 driver. Due to that, the atomisp2 ov2680 staging one was removed - the bttv driver was finally converted to videobuf2 framework. This was the last one upstream using videobuf version 1 core. We'll likely remove the old videobuf framework on 6.7 - lots of improvements at atomisp driver: it now works with normal I2C sensors. Several compile-mode dependecies to select between ISP2400 and ISP2401 are now solved in runtime - a new ipu-bridge logic was added to work with IVSC MEI drivers - venus driver gained better support for new VPU versions - the v4l core async framework has gained lots of improvements and cleanups - lots of other cleanups, improvements and driver fixes * tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits) media: ivsc: Add ACPI dependency media: bttv: convert to vb2 media: bttv: use audio defaults for winfast2000 media: bttv: refactor bttv_set_dma() media: bttv: move vbi_skip/vbi_count out of buffer media: bttv: remove crop info from bttv_buffer media: bttv: remove tvnorm field from bttv_buffer media: bttv: remove format field from bttv_buffer media: bttv: move do_crop flag out of bttv_fh media: bttv: copy vbi_fmt from bttv_fh media: bttv: copy vid fmt/width/height from fh media: bttv: radio use v4l2_fh instead of bttv_fh media: bttv: replace BUG with WARN_ON media: bttv: use video_drvdata to get bttv media: i2c: rdacm21: Fix uninitialized value media: coda: Remove duplicated include media: vivid: fix the racy dev->radio_tx_rds_owner media: i2c: ccs: Check rules is non-NULL media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate media: i2c: ds90ub953: Fix use of uninitialized variables ... |
||
|
Linus Torvalds
|
1c9f8dff62 |
Char/Misc driver changes for 6.6-rc1
Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+ t9KG0iMDXRuTsOqeEQbd =tVnk -----END PGP SIGNATURE----- Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ... |
||
|
Linus Torvalds
|
8e1e49550d |
TTY/Serial driver changes for 6.6-rc1
Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
|
||
|
Linus Torvalds
|
51e7accbe8 |
USB / Thunderbolt / PHY driver update for 6.6-rc1
Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPIAOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn80gCgybzMp0YnSildFetSC8lUJTnzjQcAn3KWzb75
Zt72jxGl4ZOXHEpozG4O
=FLrK
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
|
||
|
Linus Torvalds
|
e0152e7481 |
RISC-V Patches for the 6.6 Merge Window, Part 1
* Support for the new "riscv,isa-extensions" and "riscv,isa-base" device tree interfaces for probing extensions. * Support for userspace access to the performance counters. * Support for more instructions in kprobes. * Crash kernels can be allocated above 4GiB. * Support for KCFI. * Support for ELFs in !MMU configurations. * ARCH_KMALLOC_MINALIGN has been reduced to 8. * mmap() defaults to sv48-sized addresses, with longer addresses hidden behind a hint (similar to Arm and Intel). * Also various fixes and cleanups. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmTx96kTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiVjRD/9DYVLlkQ/OEDJjPaEcYCP49xgIVUUU lhs3XbSs2VNHBaiG114f6Q0AaT/uNi+uqSej3CeTmEot2kZkBk/f2yu+UNIriPZ9 GQiZsdyXhu921C+5VFtiI47KDWOVZ+Jpy3M1ll61IWt3yPSQHr1xOP0AOiyHHqe3 cmqpNnzjajlfVDoXPc2mGGzUJt/7ar4thcwnMNi98raXR5Qh7SP6rrHjoQhE1oFk LMP3CHqEAcHE2tE4CxZVpc6HOQ5m0LpQIOK7ypufGMyoIYESm5dt/JOT4MlhTtDw 6JzyVKtiM7lartUnUaW3ZoX4trQYT5gbXxWrJ2gCnUGy3VulikoXr1Rpz0qfdeOR XN8OLkVAqHfTGFI7oKk24f9Adw96R5NPZcdCay90h4J/kMfCiC7ZyUUI1XIa5iy1 np5pZCkf8HNcdywML7qcFd5n2O0wchyFnRLFZo6kJP9Ls5cEi6kBx/1jSdTcNgx/ fUKXyoEcriGoQiiwn29+4RZnU69gJV3zqQNLPpuwDQ5F/Q1zHTlrr+dqzezKkzcO dRTV2d2Q4A5vIDXPptzNNLlRQdrc8qxPJ1lxQVkPIU4/mtqczmZBwlyY2u9zwPyS sehJgJZnoAf+jm71NgQAKLck4MUBsMnMogOWunhXkVRCoZlbbkUWX4ECZYwPKsVk W7zVPmLvSM0l5g== =/tXb -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the new "riscv,isa-extensions" and "riscv,isa-base" device tree interfaces for probing extensions - Support for userspace access to the performance counters - Support for more instructions in kprobes - Crash kernels can be allocated above 4GiB - Support for KCFI - Support for ELFs in !MMU configurations - ARCH_KMALLOC_MINALIGN has been reduced to 8 - mmap() defaults to sv48-sized addresses, with longer addresses hidden behind a hint (similar to Arm and Intel) - Also various fixes and cleanups * tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V riscv: support PREEMPT_DYNAMIC with static keys riscv: Move create_tmp_mapping() to init sections riscv: Mark KASAN tmp* page tables variables as static riscv: mm: use bitmap_zero() API riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B riscv: remove redundant mv instructions RISC-V: mm: Document mmap changes RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Restrict address space for sv39,sv48,sv57 riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent riscv: allow kmalloc() caches aligned to the smallest value riscv: support the elf-fdpic binfmt loader binfmt_elf_fdpic: support 64-bit systems riscv: Allow CONFIG_CFI_CLANG to be selected riscv/purgatory: Disable CFI riscv: Add CFI error handling riscv: Add ftrace_stub_graph riscv: Add types to indirectly called assembly functions ... |
||
|
Linus Torvalds
|
659b3613fc |
dlm for 6.6
Changes include: - Allow blocking posix lock requests to be interrupted while waiting. This requires a cancel request to be sent to the userspace daemon where posix lock requests are processed across the cluster. - Fix a posix lock patch from the previous cycle in which lock requests from different file systems could be mixed up. - Fix some long standing problems with nfs posix lock cancelation. - Add a new debugfs file for printing queued callbacks. - Stop modifying buffers that have been used to receive a message. - Misc cleanups and some refactoring. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJk8KCgAAoJEDgbc8f8gGmqfk4P/jB4L2qwaamq2mNRxFPXSzpp y5UiNoMG8Mw4OT9vytu2xzmmrYT7d1TvZ4lNcLYjkNYmcyuTZzu8o/kvGwt9gnXC 94DPmGQb0RQY/pZOdTMcIBplXiCSFpooweFOQjiWo7wlwVlYGVcfEIv9xQTNIT2/ m0niBFEWDDbVudbWXXaa4lnvo07RTmSxiHjtxqbkea2jLUgxw9mYOR8C6De3rlJf Uh450Kitktak9tywBZa3yj8Cgy8SbiWNHlNvcV1DI3QE7LKOM5+6qVuwERYYx9lw JbdtEoRr97QFf4w40YrJpAxFBiHCLXAquz3D3cJI8mW0RDqDuGUFU6SfsCfQEza6 Dau6XrtfuumArMn/zViBIase9xkSb36RNFopr2Si6mUoLpPalUPuLr+42qmxZY3c KOvWis4UFq4OiOqZY5gBBS6IKoJ+X4pVnNJswScvKFA2VBLCf9fucKRoEVOAUTbg BoJEwOjBQCoaATbGBHjwdjZ4yX/x/tLN0LsPW202QOMGdfSdeD6Wr+COyS916eVK 8Nk3lcBcU21Nhulf2Ci3Zr6B9nG09UqDRHYfH0LJJX0dq++SBRvQvjI2lcdJ0Dvj We7nVqhcW/r486oS/r8kTXOtctYYMxecoQFYPcVufQAIU8+6YZUD53wui8EyVL/2 3GmejZgMomvGn8D4kNPC =BBCe -----END PGP SIGNATURE----- Merge tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Allow blocking posix lock requests to be interrupted while waiting. This requires a cancel request to be sent to the userspace daemon where posix lock requests are processed across the cluster. - Fix a posix lock patch from the previous cycle in which lock requests from different file systems could be mixed up. - Fix some long standing problems with nfs posix lock cancelation. - Add a new debugfs file for printing queued callbacks. - Stop modifying buffers that have been used to receive a message. - Misc cleanups and some refactoring. * tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix plock lookup when using multiple lockspaces fs: dlm: don't use RCOM_NAMES for version detection fs: dlm: create midcomms nodes when configure fs: dlm: constify receive buffer fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy fs: dlm: drop rxbuf manipulation in dlm_copy_master_names fs: dlm: get recovery sequence number as parameter fs: dlm: cleanup lock order fs: dlm: remove clear_members_cb fs: dlm: add plock dev tracepoints fs: dlm: check on plock ops when exit dlm fs: dlm: debugfs for queued callbacks fs: dlm: remove unused processed_nodes fs: dlm: add missing spin_unlock fs: dlm: fix F_CANCELLK to cancel pending request fs: dlm: allow to F_SETLKW getting interrupted fs: dlm: remove twice newline |
||
|
Linus Torvalds
|
df57721f9a |
Add x86 shadow stack support
Convert IBT selftest to asm to fix objtool warning -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTv1QQACgkQaDWVMHDJ krAUwhAAn6TOwHJK8BSkHeiQhON1nrlP3c5cv0AyZ2NP8RYDrZrSZvhpYBJ6wgKC Cx5CGq5nn9twYsYS3KsktLKDfR3lRdsQ7K9qtyFtYiaeaVKo+7gEKl/K+klwai8/ gninQWHk0zmSCja8Vi77q52WOMkQKapT8+vaON9EVDO8dVEi+CvhAIfPwMafuiwO Rk4X86SzoZu9FP79LcCg9XyGC/XbM2OG9eNUTSCKT40qTTKm5y4gix687NvAlaHR ko5MTsdl0Wfp6Qk0ohT74LnoA2c1g/FluvZIM33ci/2rFpkf9Hw7ip3lUXqn6CPx rKiZ+pVRc0xikVWkraMfIGMJfUd2rhelp8OyoozD7DB7UZw40Q4RW4N5tgq9Fhe9 MQs3p1v9N8xHdRKl365UcOczUxNAmv4u0nV5gY/4FMC6VjldCl2V9fmqYXyzFS4/ Ogg4FSd7c2JyGFKPs+5uXyi+RY2qOX4+nzHOoKD7SY616IYqtgKoz5usxETLwZ6s VtJOmJL0h//z0A7tBliB0zd+SQ5UQQBDC2XouQH2fNX2isJMn0UDmWJGjaHgK6Hh 8jVp6LNqf+CEQS387UxckOyj7fu438hDky1Ggaw4YqowEOhQeqLVO4++x+HITrbp AupXfbJw9h9cMN63Yc0gVxXQ9IMZ+M7UxLtZ3Cd8/PVztNy/clA= =3UUm -----END PGP SIGNATURE----- Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 shadow stack support from Dave Hansen: "This is the long awaited x86 shadow stack support, part of Intel's Control-flow Enforcement Technology (CET). CET consists of two related security features: shadow stacks and indirect branch tracking. This series implements just the shadow stack part of this feature, and just for userspace. The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permission shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more information, refer to the links below for the earlier versions of this patch set" Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/ Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/ * tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/shstk: Change order of __user in type x86/ibt: Convert IBT selftest to asm x86/shstk: Don't retry vm_munmap() on -EINTR x86/kbuild: Fix Documentation/ reference x86/shstk: Move arch detail comment out of core mm x86/shstk: Add ARCH_SHSTK_STATUS x86/shstk: Add ARCH_SHSTK_UNLOCK x86: Add PTRACE interface for shadow stack selftests/x86: Add shadow stack test x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/shstk: Wire in shadow stack interface x86: Expose thread features in /proc/$PID/status x86/shstk: Support WRSS for userspace x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Check that signal frame is shadow stack mem x86/shstk: Check that SSP is aligned on sigreturn x86/shstk: Handle signals for shadow stack x86/shstk: Introduce routines modifying shstk x86/shstk: Handle thread shadow stack x86/shstk: Add user-mode shadow stack support ... |
||
|
Linus Torvalds
|
4debf77169 |
iommufd for 6.6
This includes a shared branch with VFIO:
- Enhance VFIO_DEVICE_GET_PCI_HOT_RESET_INFO so it can work with iommufd
FDs, not just group FDs. This removes the last place in the uAPI that
required the group fd.
- Give VFIO a new device node /dev/vfio/devices/vfioX (the so called cdev
node) which is very similar to the FD from VFIO_GROUP_GET_DEVICE_FD.
The cdev is associated with the struct device that the VFIO driver is
bound to and shows up in sysfs in the normal way.
- Add a cdev IOCTL VFIO_DEVICE_BIND_IOMMUFD which allows a newly opened
/dev/vfio/devices/vfioX to be associated with an IOMMUFD, this replaces
the VFIO_GROUP_SET_CONTAINER flow.
- Add cdev IOCTLs VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT to allow the IOMMU
translation the vfio_device is associated with to be changed. This is a
significant new feature for VFIO as previously each vfio_device was
fixed to a single translation.
The translation is under the control of iommufd, so it can be any of
the different translation modes that iommufd is learning to create.
At this point VFIO has compilation options to remove the legacy interfaces
and in modern mode it behaves like a normal driver subsystem. The
/dev/vfio/iommu and /dev/vfio/groupX nodes are not present and each
vfio_device only has a /dev/vfio/devices/vfioX cdev node that represents
the device.
On top of this is built some of the new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that hold
the translation mapping. This is the basic functionality for the
normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors when
emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW that
owns a VFIO device. This includes support for the Intel iommu, and
patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kapis iommufd_ctx_has_group(), iommufd_device_to_ictx(),
iommufd_device_to_id(), iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some per-group
data
- Reorganize how the internal hwpt allocation flows to have more robust
locking
- Improve the access interfaces to support detach and replace of an IOAS
from an access
- New selftests and a rework of how the selftests creates a mock iommu
driver to be more like a real iommu driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZO/QDQAKCRCFwuHvBreF
YZ2iAP4hNEF6MJLRI2A28V3I/80f3x9Ed3Cirp/Q8ZdVEE+HYQD8DFaafJ0y3iPQ
5mxD4ZrZ9KfUns/gUqCT5oPHjrcvSAM=
=EQCw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
|
||
|
Linus Torvalds
|
ec0e2dc810 |
VFIO updates for v6.6-rc1
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----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=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
|
||
|
Linus Torvalds
|
3d3dfeb3ae |
for-6.6/block-2023-08-28
-----BEGIN PGP SIGNATURE-----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=p1bd
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
|
||
|
Linus Torvalds
|
c1b7fcf3f6 |
for-6.6/io_uring-2023-08-28
-----BEGIN PGP SIGNATURE-----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=XS+G
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
|
||
|
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
||
|
Linus Torvalds
|
b96a3e9142 |
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
||
|
Linus Torvalds
|
bd6c11bc43 |
Networking changes for 6.6.
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
||
|
Linus Torvalds
|
68cf01760b |
This update includes the following changes:
API: - Move crypto engine callback from tfm ctx into algorithm object. - Fix atomic sleep bug in crypto_destroy_instance. - Move lib/mpi into lib/crypto. Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10. Drivers: - Add AES skcipher and aead support to starfive. - Add Dynamic Boost Control support to ccp. - Add support for STM32P13 platform to stm32. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmTsZkMACgkQxycdCkmx i6furw//e6kYK1CTOqidPM6nI0KK1Ok204VXu56H0wM4THZ09ZwcbDNKpvI6vjMi XZkKthiayl/1okmpRVP0rPqMWDtxajeu6IUAQqqFGUFU8R7AqCDrOd+te+zlSFWG 16ySNQO47RND0OzNqZ4ojgCC0n9RpP+zOfndmderZ4EnfXSbodwGUwkcuE7Z96cP jNoainO2iwlyMZPlVynrw61O3RxGu/s/ch+uY1mV+TyvAAWoOlzt57gYUs3eGduz 4Ky+0Ubctg3sfBaqA2Hg6GjtAqG/QUssRyj8YgsFMrgXPHDTbLh6abej39wWo4gz ZdC7Bm47hV/yfVdWe2iq3/5iqdILEdPBh3fDh6NNsZ1Jlm3aEZpH9rEXm0k4X2MJ A9NDAFVj8dAYVZza7+Y8jPc8FNe+HqN9HYip/2K7g68WAJGWnMc9lq9qGwGmg1Gl dn6yM27AgH8B+UljWYM9FS1ZFsc8KCudJavRZqA2d0W3rbXVWAoBBp83ii0yX1Nm ZPAblAYMZCDeCtrVrDYKLtGn566rfpCrv3R5cppwHLksGJsDxgWrjG47l9uy5HXI u05jiXT11R+pjIU2Wv5qsiUIhyvli6AaiFYHIdZ8fWaovPAOdhrCrN3IryvUVHj/ LqMcnmW1rWGNYN9pqHn0sQZ730ZJIma0klhTZOn8HPJNbiK68X0= =LbcA -----END PGP SIGNATURE----- Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Move crypto engine callback from tfm ctx into algorithm object - Fix atomic sleep bug in crypto_destroy_instance - Move lib/mpi into lib/crypto Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10 Drivers: - Add AES skcipher and aead support to starfive - Add Dynamic Boost Control support to ccp - Add support for STM32P13 platform to stm32" * tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits) Revert "dt-bindings: crypto: qcom,prng: Add SM8450" crypto: chelsio - Remove unused declarations X.509: if signature is unsupported skip validation crypto: qat - fix crypto capability detection for 4xxx crypto: drivers - Explicitly include correct DT includes crypto: engine - Remove crypto_engine_ctx crypto: zynqmp - Use new crypto_engine_op interface crypto: virtio - Use new crypto_engine_op interface crypto: stm32 - Use new crypto_engine_op interface crypto: jh7110 - Use new crypto_engine_op interface crypto: rk3288 - Use new crypto_engine_op interface crypto: omap - Use new crypto_engine_op interface crypto: keembay - Use new crypto_engine_op interface crypto: sl3516 - Use new crypto_engine_op interface crypto: caam - Use new crypto_engine_op interface crypto: aspeed - Remove non-standard sha512 algorithms crypto: aspeed - Use new crypto_engine_op interface crypto: amlogic - Use new crypto_engine_op interface crypto: sun8i-ss - Use new crypto_engine_op interface crypto: sun8i-ce - Use new crypto_engine_op interface ... |
||
|
Linus Torvalds
|
1a7c611546 |
Perf events changes for v6.6:
- AMD IBS improvements - Intel PMU driver updates - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events - Micro-optimize software events and the ring-buffer code - Misc cleanups & fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmTtBscRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hHoQ/+IBQ8Xi/rcdd40n8OqEB/VBWVuSjNT3uN 3pHHcTl2Pio9CxBeat42NekNijlRILCKJrZ3Lt3JWBmWyWv5l3KFabelj+lDF2xa TVCjTnQNe1+HvrODYnF4ECIs5vaoMVjcJ9jg8+VDgAcOQr1nZs4m5TVAd6TLqPpV urBEQVULkkzk7ZRhfrugKhw+wrpWFefgGCx0RV8ijZB7TLMHc2wE+Q/sTxKdKceL wNaJaDgV33pZh0aImwR9pKUE532hF1FiBdLuehkh61PZa1L82jzAX1xjw2s1hSa4 eIWemPHJIYfivRlENbJsDWc4N8gk6ijVHwrxGcr4Axu+NN+zPtQ3ddhaGMAyKdTo qUKXH3MZSMIl++jI5Fkc6xM+XLvY1rML62epSzMwu/cc7Z5MeyWdQcri0N9YFuO7 wUUNnFpU00lwQBLbyyUQ3Zi8E0QV7NuPW4axTkmntiIjMpLagaEvVSf6nf8qLpbE WTT16s707t19hUZNazNZ7ONmhly4ALbHFQEH65J2KoYn99fYqy9z68Hwk+xnmykw bc3qvfhpw0MImQQ+DqHiBwb4n4UuvY2WlkkZI3FfNeSG63DaM2mZikfpElpXYjn6 9iOIXvx21Wiq/n0cbLhidI2q/ZzFCzYLCk6ikZ320wb+rhvd7EoSlZil6QSzn3pH Qdk+NEZgWQY= =ZT6+ -----END PGP SIGNATURE----- Merge tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event updates from Ingo Molnar: - AMD IBS improvements - Intel PMU driver updates - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events - Micro-optimize software events and the ring-buffer code - Misc cleanups & fixes * tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call perf/x86/intel: Add Crestmont PMU x86/cpu: Update Hybrids x86/cpu: Fix Crestmont uarch x86/cpu: Fix Gracemont uarch perf: Remove unused extern declaration arch_perf_get_page_size() perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA perf/mem: Introduce PERF_MEM_LVLNUM_UNC perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin locking/arch: Avoid variable shadowing in local_try_cmpxchg() perf/core: Use local64_try_cmpxchg in perf_swevent_set_period perf/x86: Use local64_try_cmpxchg perf/amd: Prevent grouping of IBS events |
||
|
Linus Torvalds
|
727dbda16b |
hardening updates for v6.6-rc1
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver).
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song).
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn).
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva).
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt).
- Convert nsproxy.count to refcount_t (Elena Reshetova).
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test.
- Fix build failure with gcc-plugins on GCC 14+.
- Fix selftests to respect SKIP for signal-delivery tests.
- Fix CFI warning for paravirt callback prototype.
- Clarify documentation for seq_show_option_n() usage.
-----BEGIN PGP SIGNATURE-----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=9ZWP
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
|
||
|
Linus Torvalds
|
b03a434214 |
seccomp updates for v6.6-rc1
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter Oskolkov). This touches the scheduler and perf but has been Acked by Peter Zijlstra. - Fix regression in syscall skipping and restart tracing on arm32. This touches arch/arm/ but has been Acked by Arnd Bergmann. -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmTs418WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohpD/4tEfRdnb/KDgwQ7uvqBonUJXcx wqw17LZCGTpBV3/Tp3+aEseD1NezOxiMJL88VyUHSy7nfDJShbL6QtyoenwEOeXJ HmBUfcIH3cqRutHEJ3drYBzBetpeeK2G+gTYVj+JoEfPWyPf+Egj+1JE2n1xLi92 WC1miBAyBZ59kN+D1hcDzJu24CkAwbcUYlEzGejN5lBOwxYV3/fjARBVRvefOO5m jljSCIVJOFgCiybKhJ7Zw1+lkFc3cIlcOgr4/ZegSc8PxFVebnuImTHHp/gvoo6F 7d1xe5Hk+PSfNvVq41MAeRB2vK2tY5efwjXRarThUaydPTO43KiQm0dzP0EYWK9a LcOg8zAXZnpvuWU5O2SqUKADcxe2TjS1WuQ/Q4ixxgKz2kJKDwrNU8Frf327eLSR acfZgMMiUfEXyXDV9B3LzNAtwdvwyxYrzEzxgKywhThIhZmQDat0rI2IaTV5QIc5 pkxiFEe0TPwpzyUVO9dSzE+ughTmNQOKk5uAM9e2NwRwVdhEmlZAxo0kStJ1NoaA yDjYIKfaNBElchL4v2931KJFJseI+uRaWdW10JEV+1M69+gEAEs6wbmAxtcYS776 xWsYp3slXzlmeVyvQp/ah8p0y55r+qTbcnhkvIdiwLYei4Bh3KOoJUlVmW0V5dKq b+7qspIvBA0kKRAqPw== =DI8R -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter Oskolkov). This touches the scheduler and perf but has been Acked by Peter Zijlstra. - Fix regression in syscall skipping and restart tracing on arm32. This touches arch/arm/ but has been Acked by Arnd Bergmann. * tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Add missing kerndoc notations ARM: ptrace: Restore syscall skipping for tracers ARM: ptrace: Restore syscall restart tracing selftests/seccomp: Handle arm32 corner cases better perf/benchmark: add a new benchmark for seccom_unotify selftest/seccomp: add a new test for the sync mode of seccomp_user_notify seccomp: add the synchronous mode for seccomp_unotify sched: add a few helpers to wake up tasks on the current cpu sched: add WF_CURRENT_CPU and externise ttwu seccomp: don't use semaphore and wait_queue together |
||
|
Linus Torvalds
|
547635c6ac |
for-6.6-tag
-----BEGIN PGP SIGNATURE-----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=N7Yn
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"No new features, the bulk of the changes are fixes, refactoring and
cleanups. The notable fix is the scrub performance restoration after
rewrite in 6.4, though still only partial.
Fixes:
- scrub performance drop due to rewrite in 6.4 partially restored:
- do IO grouping by blg_plug/blk_unplug again
- avoid unnecessary tree searches when processing stripes, in
extent and checksum trees
- the drop is noticeable on fast PCIe devices, -66% and restored
to -33% of the original
- backports to 6.4 planned
- handle more corner cases of transaction commit during orphan
cleanup or delayed ref processing
- use correct fsid/metadata_uuid when validating super block
- copy directory permissions and time when creating a stub subvolume
Core:
- debugging feature integrity checker deprecated, to be removed in
6.7
- in zoned mode, zones are activated just before the write, making
error handling easier, now the overcommit mechanism can be enabled
again which improves performance by avoiding more frequent flushing
- v0 extent handling completely removed, deprecated long time ago
- error handling improvements
- tests:
- extent buffer bitmap tests
- pinned extent splitting tests
- cleanups and refactoring:
- compression writeback
- extent buffer bitmap
- space flushing, ENOSPC handling"
* tag 'for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
btrfs: tests: test invalid splitting when skipping pinned drop extent_map
btrfs: tests: add a test for btrfs_add_extent_mapping
btrfs: tests: add extent_map tests for dropping with odd layouts
btrfs: scrub: move write back of repaired sectors to scrub_stripe_read_repair_worker()
btrfs: scrub: don't go ordered workqueue for dev-replace
btrfs: scrub: fix grouping of read IO
btrfs: scrub: avoid unnecessary csum tree search preparing stripes
btrfs: scrub: avoid unnecessary extent tree search preparing stripes
btrfs: copy dir permission and time when creating a stub subvolume
btrfs: remove pointless empty list check when reading delayed dir indexes
btrfs: drop redundant check to use fs_devices::metadata_uuid
btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super
btrfs: use the correct superblock to compare fsid in btrfs_validate_super
btrfs: simplify memcpy either of metadata_uuid or fsid
btrfs: add a helper to read the superblock metadata_uuid
btrfs: remove v0 extent handling
btrfs: output extra debug info if we failed to find an inline backref
btrfs: move the !zoned assert into run_delalloc_cow
btrfs: consolidate the error handling in run_delalloc_nocow
...
|
||
|
Linus Torvalds
|
ecd7db2047 |
v6.6-vfs.tmpfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTkgAKCRCRxhvAZXjc
ouZsAPwNBHB2aPKtzWURuKx5RX02vXTzHX+A/LpuDz5WBFe8zQD+NlaBa4j0MBtS
rVYM+CjOXnjnsLc8W0euMnfYNvViKgQ=
=L2+2
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull libfs and tmpfs updates from Christian Brauner:
"This cycle saw a lot of work for tmpfs that required changes to the
vfs layer. Andrew, Hugh, and I decided to take tmpfs through vfs this
cycle. Things will go back to mm next cycle.
Features
========
- By far the biggest work is the quota support for tmpfs. New tmpfs
quota infrastructure is added to support it and a new QFMT_SHMEM
uapi option is exposed.
This offers user and group quotas to tmpfs (project quotas will be
added later). Similar to other filesystems tmpfs quota are not
supported within user namespaces yet.
- Add support for user xattrs. While tmpfs already supports security
xattrs (security.*) and POSIX ACLs for a long time it lacked
support for user xattrs (user.*). With this pull request tmpfs will
be able to support a limited number of user xattrs.
This is accompanied by a fix (see below) to limit persistent simple
xattr allocations.
- Add support for stable directory offsets. Currently tmpfs relies on
the libfs provided cursor-based mechanism for readdir. This causes
issues when a tmpfs filesystem is exported via NFS.
NFS clients do not open directories. Instead, each server-side
readdir operation opens the directory, reads it, and then closes
it. Since the cursor state for that directory is associated with
the opened file it is discarded after each readdir operation. Such
directory offsets are not just cached by NFS clients but also
various userspace libraries based on these clients.
As it stands there is no way to invalidate the caches when
directory offsets have changed and the whole application depends on
unchanging directory offsets.
At LSFMM we discussed how to solve this problem and decided to
support stable directory offsets. libfs now allows filesystems like
tmpfs to use an xarrary to map a directory offset to a dentry. This
mechanism is currently only used by tmpfs but can be supported by
others as well.
Fixes
=====
- Change persistent simple xattrs allocations in libfs from
GFP_KERNEL to GPF_KERNEL_ACCOUNT so they're subject to memory
cgroup limits. Since this is a change to libfs it affects both
tmpfs and kernfs.
- Correctly verify {g,u}id mount options.
A new filesystem context is created via fsopen() which records the
namespace that becomes the owning namespace of the superblock when
fsconfig(FSCONFIG_CMD_CREATE) is called for filesystems that are
mountable in namespaces. However, fsconfig() calls can occur in a
namespace different from the namespace where fsopen() has been
called.
Currently, when fsconfig() is called to set {g,u}id mount options
the requested {g,u}id is mapped into a k{g,u}id according to the
namespace where fsconfig() was called from. The resulting k{g,u}id
is not guaranteed to be resolvable in the namespace of the
filesystem (the one that fsopen() was called in).
This means it's possible for an unprivileged user to create files
owned by any group in a tmpfs mount since it's possible to set the
setid bits on the tmpfs directory.
The contract for {g,u}id mount options and {g,u}id values in
general set from userspace has always been that they are translated
according to the caller's idmapping. In so far, tmpfs has been
doing the correct thing. But since tmpfs is mountable in
unprivileged contexts it is also necessary to verify that the
resulting {k,g}uid is representable in the namespace of the
superblock to avoid such bugs.
The new mount api's cross-namespace delegation abilities are
already widely used. Having talked to a bunch of userspace this is
the most faithful solution with minimal regression risks"
* tag 'v6.6-vfs.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tmpfs,xattr: GFP_KERNEL_ACCOUNT for simple xattrs
mm: invalidation check mapping before folio_contains
tmpfs: trivial support for direct IO
tmpfs,xattr: enable limited user extended attributes
tmpfs: track free_ispace instead of free_inodes
xattr: simple_xattr_set() return old_xattr to be freed
tmpfs: verify {g,u}id mount options correctly
shmem: move spinlock into shmem_recalc_inode() to fix quota support
libfs: Remove parent dentry locking in offset_iterate_dir()
libfs: Add a lock class for the offset map's xa_lock
shmem: stable directory offsets
shmem: Refactor shmem_symlink()
libfs: Add directory operations for stable offsets
shmem: fix quota lock nesting in huge hole handling
shmem: Add default quota limit mount options
shmem: quota support
shmem: prepare shmem quota infrastructure
quota: Check presence of quota operation structures instead of ->quota_read and ->quota_write callbacks
shmem: make shmem_get_inode() return ERR_PTR instead of NULL
shmem: make shmem_inode_acct_block() return error
|
||
|
Linus Torvalds
|
84ab1277ce |
v6.6-vfs.fs_context
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXUHQAKCRCRxhvAZXjc
opWuAQC5wYyKWMwpxc3GaGcHiC7nq0uyYCcVgzeebsw1eGzFvgD9FoYRphC2pqi1
p8qUexEK2aOZmPquFWmRDTRMcZ23YAk=
=UKnx
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mount API updates from Christian Brauner:
"This introduces FSCONFIG_CMD_CREATE_EXCL which allows userspace to
implement something like
$ mount -t ext4 --exclusive /dev/sda /B
which fails if a superblock for the requested filesystem does already
exist instead of silently reusing an existing superblock.
Without it, in the sequence
$ move-mount -f xfs -o source=/dev/sda4 /A
$ move-mount -f xfs -o noacl,source=/dev/sda4 /B
the initial mounter will create a superblock. The second mounter will
reuse the existing superblock, creating a bind-mount (see [1] for the
source of the move-mount binary).
The problem is that reusing an existing superblock means all mount
options other than read-only and read-write will be silently ignored
even if they are incompatible requests. For example, the second mount
has requested no POSIX ACL support but since the existing superblock
is reused POSIX ACL support will remain enabled.
Such silent superblock reuse can easily become a security issue.
After adding support for FSCONFIG_CMD_CREATE_EXCL to mount(8) in
util-linux this can be fixed:
$ move-mount -f xfs --exclusive -o source=/dev/sda4 /A
$ move-mount -f xfs --exclusive -o noacl,source=/dev/sda4 /B
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api"
Link: https://github.com/brauner/move-mount-beneath [1]
Link: https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Link: https://lore.kernel.org/lkml/20230824-anzog-allheilmittel-e8c63e429a79@brauner/
* tag 'v6.6-vfs.fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add FSCONFIG_CMD_CREATE_EXCL
fs: add vfs_cmd_reconfigure()
fs: add vfs_cmd_create()
super: remove get_tree_single_reconf()
|
||
|
Dima Chumak
|
390a24cbc3 |
devlink: Expose port function commands to control IPsec packet offloads
Expose port function commands to enable / disable IPsec packet offloads,
this is used to control the port IPsec capabilities.
When IPsec packet is disabled for a function of the port (default),
function cannot offload IPsec packet operations (encapsulation and XFRM
policy offload). When enabled, IPsec packet operations can be offloaded
by the function of the port, which includes crypto operation
(Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy
offload.
Example of a PCI VF port which supports IPsec packet offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Dima Chumak
|
62b6442c58 |
devlink: Expose port function commands to control IPsec crypto offloads
Expose port function commands to enable / disable IPsec crypto offloads,
this is used to control the port IPsec capabilities.
When IPsec crypto is disabled for a function of the port (default),
function cannot offload any IPsec crypto operations (Encrypt/Decrypt and
XFRM state offloading). When enabled, IPsec crypto operations can be
offloaded by the function of the port.
Example of a PCI VF port which supports IPsec crypto offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
bebfbf07c7 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZOjkTAAKCRDbK58LschI gx32AP9gaaHFBtOYBfoenKTJfMgv1WhtQHIBas+WN9ItmBx9MAEA4gm/VyQ6oD7O EBjJKJQ2CZ/QKw7cNacXw+l5jF7/+Q0= =8P7g -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-08-25 We've added 87 non-merge commits during the last 8 day(s) which contain a total of 104 files changed, 3719 insertions(+), 4212 deletions(-). The main changes are: 1) Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds, from Jiri Olsa. 2) Add support BPF cpu v4 instructions for arm64 JIT compiler, from Xu Kuohai. 3) Add support BPF cpu v4 instructions for riscv64 JIT compiler, from Pu Lehui. 4) Fix LWT BPF xmit hooks wrt their return values where propagating the result from skb_do_redirect() would trigger a use-after-free, from Yan Zhai. 5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr where the map's value kptr type and locally allocated obj type mismatch, from Yonghong Song. 6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph root/node which bypassed reg->off == 0 enforcement, from Kumar Kartikeya Dwivedi. 7) Lift BPF verifier restriction in networking BPF programs to treat comparison of packet pointers not as a pointer leak, from Yafang Shao. 8) Remove unmaintained XDP BPF samples as they are maintained in xdp-tools repository out of tree, from Toke Høiland-Jørgensen. 9) Batch of fixes for the tracing programs from BPF samples in order to make them more libbpf-aware, from Daniel T. Lee. 10) Fix a libbpf signedness determination bug in the CO-RE relocation handling logic, from Andrii Nakryiko. 11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up fixes for bpf_refcount shared ownership implementation, both from Dave Marchevsky. 12) Add a new bpf_object__unpin() API function to libbpf, from Daniel Xu. 13) Fix a memory leak in libbpf to also free btf_vmlinux when the bpf_object gets closed, from Hao Luo. 14) Small error output improvements to test_bpf module, from Helge Deller. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits) selftests/bpf: Add tests for rbtree API interaction in sleepable progs bpf: Allow bpf_spin_{lock,unlock} in sleepable progs bpf: Consider non-owning refs to refcounted nodes RCU protected bpf: Reenable bpf_refcount_acquire bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes bpf: Consider non-owning refs trusted bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire selftests/bpf: Enable cpu v4 tests for RV64 riscv, bpf: Support unconditional bswap insn riscv, bpf: Support signed div/mod insns riscv, bpf: Support 32-bit offset jmp insn riscv, bpf: Support sign-extension mov insns riscv, bpf: Support sign-extension load insns riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W samples/bpf: Add note to README about the XDP utilities moved to xdp-tools samples/bpf: Cleanup .gitignore samples/bpf: Remove the xdp_sample_pkts utility samples/bpf: Remove the xdp1 and xdp2 utilities samples/bpf: Remove the xdp_rxq_info utility samples/bpf: Remove the xdp_redirect* utilities ... ==================== Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
4942fed84b |
RISC-V Fixes for 6.5-rc8
* The vector ucontext extension has been extended with vlenb.
* The vector registers ELF core dump note type has been changed to avoid
aliasing with the CSR type used in embedded systems.
* Support for accessing vector registers via ptrace() has been reverted.
* Another build fix for the ISA spec changes around Zifencei/Zicsr that
manifests on some systems built with binutils-2.37 and gcc-11.2.
-----BEGIN PGP SIGNATURE-----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=bvaa
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This is obviously not ideal, particularly for something this late in
the cycle.
Unfortunately we found some uABI issues in the vector support while
reviewing the GDB port, which has triggered a revert -- probably a
good sign we should have reviewed GDB before merging this, I guess I
just dropped the ball because I was so worried about the context
extension and libc suff I forgot. Hence the late revert.
There's some risk here as we're still exposing the vector context for
signal handlers, but changing that would have meant reverting all of
the vector support. The issues we've found so far have been fixed
already and they weren't absolute showstoppers, so we're essentially
just playing it safe by holding ptrace support for another release (or
until we get through a proper userspace code review).
Summary:
- The vector ucontext extension has been extended with vlenb
- The vector registers ELF core dump note type has been changed to
avoid aliasing with the CSR type used in embedded systems
- Support for accessing vector registers via ptrace() has been
reverted
- Another build fix for the ISA spec changes around Zifencei/Zicsr
that manifests on some systems built with binutils-2.37 and
gcc-11.2"
* tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix build errors using binutils2.37 toolchains
RISC-V: vector: export VLENB csr in __sc_riscv_v_state
RISC-V: Remove ptrace support for vectors
|
||
|
Eric DeVolder
|
a72bbec70d |
crash: hotplug support for kexec_load()
The hotplug support for kexec_load() requires changes to the userspace
kexec-tools and a little extra help from the kernel.
Given a kdump capture kernel loaded via kexec_load(), and a subsequent
hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites
it to reflect the hotplug change. That is the desired outcome, however,
at kernel panic time, the purgatory integrity check fails (because the
elfcorehdr changed), and the capture kernel does not boot and no vmcore is
generated.
Therefore, the userspace kexec-tools/kexec must indicate to the kernel
that the elfcorehdr can be modified (because the kexec excluded the
elfcorehdr from the digest, and sized the elfcorehdr memory buffer
appropriately).
To facilitate hotplug support with kexec_load():
- a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is
safe for the kernel to modify the kexec_load()'d elfcorehdr
- the /sys/kernel/crash_elfcorehdr_size node communicates the
preferred size of the elfcorehdr memory buffer
- The sysfs crash_hotplug nodes (ie.
/sys/devices/system/[cpu|memory]/crash_hotplug) dynamically
take into account kexec_file_load() vs kexec_load() and
KEXEC_UPDATE_ELFCOREHDR.
This is critical so that the udev rule processing of crash_hotplug
is all that is needed to determine if the userspace unload-then-load
of the kdump image is to be skipped, or not. The proposed udev
rule change looks like:
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
The table below indicates the behavior of kexec_load()'d kdump image
updates (with the new udev crash_hotplug rule in place):
Kernel |Kexec
-------+-----+----
Old |Old |New
| a | a
-------+-----+----
New | a | b
-------+-----+----
where kexec 'old' and 'new' delineate kexec-tools has the needed
modifications for the crash hotplug feature, and kernel 'old' and 'new'
delineate the kernel supports this crash hotplug feature.
Behavior 'a' indicates the unload-then-reload of the entire kdump image.
For the kexec 'old' column, the unload-then-reload occurs due to the
missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec)
does not present the crash_hotplug sysfs node, which leads to the
unload-then-reload of the kdump image.
Behavior 'b' indicates the desired optimized behavior of the kernel
directly modifying the elfcorehdr and avoiding the unload-then-reload of
the kdump image.
If the udev rule is not updated with crash_hotplug node check, then no
matter any combination of kernel or kexec is new or old, the kdump image
continues to be unload-then-reload on hotplug changes.
To fully support crash hotplug feature, there needs to be a rollout of
kernel, kexec-tools and udev rule changes. However, the order of the
rollout of these pieces does not matter; kexec_load()'d kdump images still
function for hotplug as-is.
Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Suggested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Pavel Begunkov
|
2af89abda7 |
io_uring: add option to remove SQ indirection
Not many aware, but io_uring submission queue has two levels. The first level usually appears as sq_array and stores indexes into the actual SQ. To my knowledge, no one has ever seriously used it, nor liburing exposes it to users. Add IORING_SETUP_NO_SQARRAY, when set we don't bother creating and using the sq_array and SQ heads/tails will be pointing directly into the SQ. Improves memory footprint, in term of both allocations as well as cache usage, and also should make io_get_sqe() less branchy in the end. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0ffa3268a5ef61d326201ff43a233315c96312e0.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Greg Ungerer
|
b922bf04d2
|
binfmt_elf_fdpic: support 64-bit systems
The binfmt_flat_fdpic code has a number of 32-bit specific data structures associated with it. Extend it to be able to support and be used on 64-bit systems as well. The new code defines a number of key 64-bit variants of the core elf-fdpic data structures - along side the existing 32-bit sized ones. A common set of generic named structures are defined to be either the 32-bit or 64-bit ones as required at compile time. This is a similar technique to that used in the ELF binfmt loader. For example: elf_fdpic_loadseg is either elf32_fdpic_loadseg or elf64_fdpic_loadseg elf_fdpic_loadmap is either elf32_fdpic_loadmap or elf64_fdpic_loadmap the choice based on ELFCLASS32 or ELFCLASS64. Signed-off-by: Greg Ungerer <gerg@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230711130754.481209-2-gerg@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
e3f9324b23
|
RISC-V: Remove ptrace support for vectors
We've found two bugs here: NT_RISCV_VECTOR steps on NT_RISCV_CSR (which
is only for embedded), and we don't have vlenb in the core dumps. Given
that we've have a pair of bugs croup up as part of the GDB review we've
probably got other issues, so let's just cut this for 6.5 and get it
right.
Fixes:
|
||
|
Greg Joyce
|
3bfeb61256 |
block: sed-opal: keyring support for SED keys
Extend the SED block driver so it can alternatively obtain a key from a sed-opal kernel keyring. The SED ioctls will indicate the source of the key, either directly in the ioctl data or from the keyring. This allows the use of SED commands in scripts such as udev scripts so that drives may be automatically unlocked as they become available. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-4-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Greg Joyce
|
5c82efc1ae |
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
This is used in conjunction with IOC_OPAL_REVERT_TPR to return a drive to Original Factory State without erasing the data. If IOC_OPAL_REVERT_LSP is called with opal_revert_lsp.options bit OPAL_PRESERVE set prior to calling IOC_OPAL_REVERT_TPR, the drive global locking range will not be erased. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-3-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Greg Joyce
|
9fb10726ec |
block: sed-opal: Implement IOC_OPAL_DISCOVERY
Add IOC_OPAL_DISCOVERY ioctl to return raw discovery data to a SED Opal application. This allows the application to display drive capabilities and state. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-2-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Justin Chen
|
42a569cd0d |
serial: 8250_bcm7271: improve bcm7271 8250 port
The 8250 BCM7271 UART is not a direct match to PORT_16550A and other generic ports do not match its hardware capabilities. PORT_ALTR matches the rx trigger levels, but its vendor configurations are not compatible. Unfortunately this means we need to create another port to fully capture the hardware capabilities of the BCM7271 UART. To alleviate some latency pressures, we default the rx trigger level to 8. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Daniel Starke
|
e112ec4202 |
tty: n_gsm: add restart flag to extended ioctl config
Currently, changing the parameters of the n_gsm mux gives no direct control to the user whether this should trigger a mux reset or not. The decision is solely made by the driver based on the assumption which parameter changes are compatible or not. Therefore, the user has no means to perform an automatic mux reset after parameter configuration for non-conflicting changes. Add the parameter 'flags' to 'gsm_config_ext' to force a mux reset after ioctl setting regardless of whether the changes made require this or not by setting this to 'GSM_FL_RESTART'. This is done similar to 'GSM_FL_RESTART' in gsm_dlci_config.flags. Note that 'GSM_FL_RESTART' is currently the only allowed flag to allow additions here. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Daniel Starke
|
901de5ac0e |
tty: n_gsm: add missing description to structs in gsmmux.h
Currently, all available structure fields in gsmmux.h except those for gsm_config are commented. Furthermore, no kernel doc comments are used. Fix this by adding appropriate comments to the not commented fields of gsm_config. Convert the comments of the other structs to kernel doc format. Note that 'mru' and 'mtu' refer to the size without basic/advanced option mode header and byte stuffing as defined in the standard in chapter 5.7.2. Link: https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Daniel Starke
|
a031c77dfc |
tty: n_gsm: add restart flag to DLC specific ioctl config
Currently, changing the parameters of a DLCI gives no direct control to the user whether this should trigger a channel reset or not. The decision is solely made by the driver based on the assumption which parameter changes are compatible or not. Therefore, the user has no means to perform an automatic channel reset after parameter configuration for non-conflicting changes. Add the parameter 'flags' to 'gsm_dlci_config' to force a channel reset after ioctl setting regardless of whether the changes made require this or not by setting this to 'GSM_FL_RESTART'. Note that 'GSM_FL_RESTART' is currently the only allow flag to allow additions here. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
GONG, Ruiqi
|
a2f02c9920 |
netfilter: ebtables: replace zero-length array members
As suggested by Kees[1], replace the old-style 0-element array members of multiple structs in ebtables.h with modern C99 flexible array. [1]: https://lore.kernel.org/all/5E8E0F9C-EE3F-4B0D-B827-DC47397E2A4A@kernel.org/ [ fw@strlen.de: keep struct ebt_entry_target as-is, causes compiler warning: "variable sized type 'struct ebt_entry_target' not at the end of a struct or class is a GNU extension" ] Link: https://github.com/KSPP/linux/issues/21 Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
|
GONG, Ruiqi
|
a7ed3465da |
netfilter: ebtables: fix fortify warnings in size_entry_mwt()
When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:
In function ‘fortify_memcpy_chk’,
inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler is complaining:
memcpy(&offsets[1], &entry->watchers_offset,
sizeof(offsets) - sizeof(offsets[0]));
where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
||
|
Andy Shevchenko
|
54b45ee8bd |
serial: core: Remove unused PORT_* definitions
For the last couple of years Linux kernel got rid of a few architectures and many platforms. Hence some PORT_* definitions in the serial_core.h become unused and redundant. Remove them for good. Removed IDs are checked for users against Debian Code Search engine. Hence safe to remove as there are no consumers found (only providers). While at it, add a note about 0-13, that are defined in the other file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230821083857.1065282-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jiri Olsa
|
b733eeade4 |
bpf: Add pid filter support for uprobe_multi link
Adding support to specify pid for uprobe_multi link and the uprobes are created only for task with given pid value. Using the consumer.filter filter callback for that, so the task gets filtered during the uprobe installation. We still need to check the task during runtime in the uprobe handler, because the handler could get executed if there's another system wide consumer on the same uprobe (thanks Oleg for the insight). Cc: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
0b779b61f6 |
bpf: Add cookies support for uprobe_multi link
Adding support to specify cookies array for uprobe_multi link. The cookies array share indexes and length with other uprobe_multi arrays (offsets/ref_ctr_offsets). The cookies[i] value defines cookie for i-the uprobe and will be returned by bpf_get_attach_cookie helper when called from ebpf program hooked to that specific uprobe. Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
89ae89f53d |
bpf: Add multi uprobe link
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Jiri Olsa
|
c5487f8d91 |
bpf: Switch BPF_F_KPROBE_MULTI_RETURN macro to enum
Switching BPF_F_KPROBE_MULTI_RETURN macro to anonymous enum, so it'd show up in vmlinux.h. There's not functional change compared to having this as macro. Acked-by: Yafang Shao <laoar.shao@gmail.com> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230809083440.3209381-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Qu Wenruo
|
182741d287 |
btrfs: remove v0 extent handling
The v0 extent item has been deprecated for a long time, and we don't have any report from the community either. So it's time to remove the v0 extent specific error handling, and just treat them as regular extent tree corruption. This patch would remove the btrfs_print_v0_err() helper, and enhance the involved error handling to treat them just as any extent tree corruption. No reports regarding v0 extents have been seen since the graceful handling was added in 2018. This involves: - btrfs_backref_add_tree_node() This change is a little tricky, the new code is changed to only handle BTRFS_TREE_BLOCK_REF_KEY and BTRFS_SHARED_BLOCK_REF_KEY. But this is safe, as we have rejected any unknown inline refs through btrfs_get_extent_inline_ref_type(). For keyed backrefs, we're safe to skip anything we don't know (that's if it can pass tree-checker in the first place). - btrfs_lookup_extent_info() - lookup_inline_extent_backref() - run_delayed_extent_op() - __btrfs_free_extent() - add_tree_block() Regular error handling of unexpected extent tree item, and abort transaction (if we have a trans handle). - remove_extent_data_ref() It's pretty much the same as the regular rejection of unknown backref key. But for this particular case, we can also remove a BUG_ON(). - extent_data_ref_count() We can remove the BTRFS_EXTENT_REF_V0_KEY BUG_ON(), as it would be rejected by the only caller. - btrfs_print_leaf() Remove the handling for BTRFS_EXTENT_REF_V0_KEY. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Ming Lei
|
851e06297f |
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
There isn't any reason to not support REQ_OP_ZONE_RESET_ALL given everything is actually handled in userspace, not mention it is pretty easy to support RESET_ALL. So enable REQ_OP_ZONE_RESET_ALL and let userspace handle it. Verified by 'tools/zbc_reset_zone -all /dev/ublkb0' in libzbc[1] with libublk-rs based ublk-zoned target prototype[2], follows command line for creating ublk-zoned: cargo run --example zoned -- add -1 1024 # add $dev_id $DEV_SIZE [1] https://github.com/westerndigitalcorporation/libzbc [2] https://github.com/ming1/libublk-rs/tree/zoned.v2 Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Andreas Hindborg <a.hindborg@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230810124326.321472-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Guangguan Wang
|
bbed596c74 |
net/smc: Extend SMCR v2 linkgroup netlink attribute
Add SMC_NLA_LGR_R_V2_MAX_CONNS and SMC_NLA_LGR_R_V2_MAX_LINKS to SMCR v2 linkgroup netlink attribute SMC_NLA_LGR_R_V2 for linkgroup's detail info showing. Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Axel Rasmussen
|
f442ab50f5 |
mm: userfaultfd: document and enable new UFFDIO_POISON feature
Update the userfaultfd API to advertise this feature as part of feature flags and supported ioctls (returned upon registration). Add basic documentation describing the new feature. Link: https://lkml.kernel.org/r/20230707215540.2324998-7-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Axel Rasmussen
|
fc71884a5f |
mm: userfaultfd: add new UFFDIO_POISON ioctl
The basic idea here is to "simulate" memory poisoning for VMs. A VM running on some host might encounter a memory error, after which some page(s) are poisoned (i.e., future accesses SIGBUS). They expect that once poisoned, pages can never become "un-poisoned". So, when we live migrate the VM, we need to preserve the poisoned status of these pages. When live migrating, we try to get the guest running on its new host as quickly as possible. So, we start it running before all memory has been copied, and before we're certain which pages should be poisoned or not. So the basic way to use this new feature is: - On the new host, the guest's memory is registered with userfaultfd, in either MISSING or MINOR mode (doesn't really matter for this purpose). - On any first access, we get a userfaultfd event. At this point we can communicate with the old host to find out if the page was poisoned. - If so, we can respond with a UFFDIO_POISON - this places a swap marker so any future accesses will SIGBUS. Because the pte is now "present", future accesses won't generate more userfaultfd events, they'll just SIGBUS directly. UFFDIO_POISON does not handle unmapping previously-present PTEs. This isn't needed, because during live migration we want to intercept all accesses with userfaultfd (not just writes, so WP mode isn't useful for this). So whether minor or missing mode is being used (or both), the PTE won't be present in any case, so handling that case isn't needed. Similarly, UFFDIO_POISON won't replace existing PTE markers. This might be okay to do, but it seems to be safer to just refuse to overwrite any existing entry (like a UFFD_WP PTE marker). Link: https://lkml.kernel.org/r/20230707215540.2324998-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Yi Liu
|
55243393b0 |
iommu/vt-d: Implement hw_info for iommu capability query
Add intel_iommu_hw_info() to report cap_reg and ecap_reg information. Link: https://lore.kernel.org/r/20230818101033.4100-6-yi.l.liu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Yi Liu
|
55dd4023ce |
iommufd: Add IOMMU_GET_HW_INFO
Under nested IOMMU translation, userspace owns the stage-1 translation table (e.g. the stage-1 page table of Intel VT-d or the context table of ARM SMMUv3, and etc.). Stage-1 translation tables are vendor specific, and need to be compatible with the underlying IOMMU hardware. Hence, userspace should know the IOMMU hardware capability before creating and configuring the stage-1 translation table to kernel. This adds IOMMU_GET_HW_INFO ioctl to query the IOMMU hardware information (a.k.a capability) for a given device. The returned data is vendor specific, userspace needs to decode it with the structure by the output @out_data_type field. As only physical devices have IOMMU hardware, so this will return error if the given device is not a physical device. Link: https://lore.kernel.org/r/20230818101033.4100-4-yi.l.liu@intel.com Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Co-developed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Lu Baolu
|
60fedb262b |
iommu: Add new iommu op to get iommu hardware information
Introduce a new iommu op to get the IOMMU hardware capabilities for iommufd. This information will be used by any vIOMMU driver which is owned by userspace. This op chooses to make the special parameters opaque to the core. This suits the current usage model where accessing any of the IOMMU device special parameters does require a userspace driver that matches the kernel driver. If a need for common parameters, implemented similarly by several drivers, arises then there's room in the design to grow a generic parameter set as well. No wrapper API is added as it is supposed to be used by iommufd only. Different IOMMU hardware would have different hardware information. So the information reported differs as well. To let the external user understand the difference, enum iommu_hw_info_type is defined. For the iommu drivers that are capable to report hardware information, it should have a unique iommu_hw_info_type and return to caller. For the driver doesn't report hardware information, caller just uses IOMMU_HW_INFO_TYPE_NONE if a type is required. Link: https://lore.kernel.org/r/20230818101033.4100-3-yi.l.liu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Co-developed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
François Michel
|
4072d97ddc |
netem: add prng attribute to netem_sched_data
Add prng attribute to struct netem_sched_data and allows setting the seed of the PRNG through netlink using the new TCA_NETEM_PRNG_SEED attribute. The PRNG attribute is not actually used yet. Signed-off-by: François Michel <francois.michel@uclouvain.be> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20230815092348.1449179-2-francois.michel@uclouvain.be Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kees Cook
|
c8248faf3c |
Compiler Attributes: counted_by: Adjust name and identifier expansion
GCC and Clang's current RFCs name this attribute "counted_by", and have
moved away from using a string for the member name. Update the kernel's
macros to match. Additionally provide a UAPI no-op macro for UAPI structs
that will gain annotations.
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Fixes:
|
||
|
Stefan Hajnoczi
|
a881b49694 |
vfio: align capability structures
The VFIO_DEVICE_GET_INFO, VFIO_DEVICE_GET_REGION_INFO, and VFIO_IOMMU_GET_INFO ioctls fill in an info struct followed by capability structs: +------+---------+---------+-----+ | info | caps[0] | caps[1] | ... | +------+---------+---------+-----+ Both the info and capability struct sizes are not always multiples of sizeof(u64), leaving u64 fields in later capability structs misaligned. Userspace applications currently need to handle misalignment manually in order to support CPU architectures and programming languages with strict alignment requirements. Make life easier for userspace by ensuring alignment in the kernel. This is done by padding info struct definitions and by copying out zeroes after capability structs that are not aligned. The new layout is as follows: +------+---------+---+---------+-----+ | info | caps[0] | 0 | caps[1] | ... | +------+---------+---+---------+-----+ In this example caps[0] has a size that is not multiples of sizeof(u64), so zero padding is added to align the subsequent structure. Adding zero padding between structs does not break the uapi. The memory layout is specified by the info.cap_offset and caps[i].next fields filled in by the kernel. Applications use these field values to locate structs and are therefore unaffected by the addition of zero padding. Note that code that copies out info structs with padding is updated to always zero the struct and copy out as many bytes as userspace requested. This makes the code shorter and avoids potential information leaks by ensuring padding is initialized. Originally-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230809203144.2880050-1-stefanha@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Miklos Szeredi
|
ba58a37c28 |
fuse: add STATX request
Use the same structure as statx. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Hao Xu
|
e78662e818 |
fuse: add a new fuse init flag to relax restrictions in no cache mode
FOPEN_DIRECT_IO is usually set by fuse daemon to indicate need of strong coherency, e.g. network filesystems. Thus shared mmap is disabled since it leverages page cache and may write to it, which may cause inconsistence. But FOPEN_DIRECT_IO can be used not for coherency but to reduce memory footprint as well, e.g. reduce guest memory usage with virtiofs. Therefore, add a new fuse init flag FUSE_DIRECT_IO_RELAX to relax restrictions in that mode, currently, it allows shared mmap. One thing to note is to make sure it doesn't break coherency in your use case. Signed-off-by: Hao Xu <howeyxu@tencent.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Damien Le Moal
|
c7b4b23b36 |
block: uapi: Fix compilation errors using ioprio.h with C++
The use of the "class" argument name in the ioprio_value() inline
function in include/uapi/linux/ioprio.h confuses C++ compilers
resulting in compilation errors such as:
/usr/include/linux/ioprio.h:110:43: error: expected primary-expression before ‘int’
110 | static __always_inline __u16 ioprio_value(int class, int level, int hint)
| ^~~
for user C++ programs including linux/ioprio.h.
Avoid these errors by renaming the arguments of the ioprio_value()
function to prioclass, priolevel and priohint. For consistency, the
arguments of the IOPRIO_PRIO_VALUE() and IOPRIO_PRIO_VALUE_HINT() macros
are also renamed in the same manner.
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes:
|
||
|
Jason Gunthorpe
|
a35762dd14 |
Linux 6.5-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTZISMeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGP+kH/RJWesO8dQ1b2jRh v1dexbytGUykROpmHBnJKDznwsSBnhDlI9Tu62dumWKRrCzwZto8Hag1QC2jYrra x7f3W087HdTSh3j5B92kGK/ZXgm4NwjVI078ujSv/e+qJMB3behpdL7uUkFUeeVV OaDhlSL4ILlyVOYPX3sHMiPutmZcXxe8/25o4aylpBrzlClKen7OODRz6gIwyVOR Nufgi/H5bkB4rDLOVI87HrxQMSpCtyGJtjTB78e/aRvIwYhJq16iuq+uBqOxQqgr anlg1nJ3r6/LphiT9H63xNFwIJDxtL7I1V8CQ9Jyvf/O4MNGSaM7sHw2l8ujTxU9 hf4GYyY= =loC2 -----END PGP SIGNATURE----- Merge tag 'v6.5-rc6' into iommufd for-next Required for following patches. Resolve merge conflict by using the hunk from the for-next branch and shifting the iommufd_object_deref_user() into iommufd_hw_pagetable_put() Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Greg Kroah-Hartman
|
bbb9e06d2c |
Merge 6.5-rc6 into usb-next
We need the USB and Thunderbolt fixes in here to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Christian Brauner
|
22ed7ecdae
|
fs: add FSCONFIG_CMD_CREATE_EXCL
Summary
=======
This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to
implement something like mount -t ext4 --exclusive /dev/sda /B which
fails if a superblock for the requested filesystem does already exist:
Before this patch
-----------------
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /A
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs -o source=/dev/sda4 /B
Requesting filesystem type xfs
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL
--------------------------------------------------------------------------
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /A
Moving single attached mount
Setting key(source) with val(/dev/sda4)
$ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B
Requesting filesystem type xfs
Request exclusive superblock creation
Mount options requested: source=/dev/sda4
Attaching mount at /B
Moving single attached mount
Setting key(source) with val(/dev/sda4)
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
Details
=======
As mentioned on the list (cf. [1]-[3]) mount requests like
mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new
superblock has been created and mounted or an existing superblock has
been reused and a bind-mount has been created.
This becomes clear in the following example where two processes create
the same mount for the same block device:
P1 P2
fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda");
fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000");
// wins and creates superblock
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
// finds compatible superblock of P1
// spins until P1 sets SB_BORN and grabs a reference
fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...)
fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs);
move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B")
Not just does P2 get a bind-mount but the mount options that P2
requestes are silently ignored. The VFS itself doesn't, can't and
shouldn't enforce filesystem specific mount option compatibility. It
only enforces incompatibility for read-only <-> read-write transitions:
mount -t ext4 /dev/sda /A
mount -t ext4 -o ro /dev/sda /B
The read-only request will fail with EBUSY as the VFS can't just
silently transition a superblock from read-write to read-only or vica
versa without risking security issues.
To userspace this silent superblock reuse can become a security issue in
because there is currently no straightforward way for userspace to know
that they did indeed manage to create a new superblock and didn't just
reuse an existing one.
This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that
returns EBUSY if an existing superblock would be reused. Userspace that
needs to be sure that it did create a new superblock with the requested
mount options can request superblock creation using this command. If the
command succeeds they can be sure that they did create a new superblock
with the requested mount options.
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
each high-level superblock creation helper:
(1) get_tree_nodev()
Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and
FSCONFIG_CMD_CREATE_EXCL are equivalent.
The binderfs or overlayfs filesystems are examples.
(4) get_tree_keyed()
Finds an existing superblock based on sb->s_fs_info. Hence,
FSCONFIG_CMD_CREATE would reuse an existing superblock whereas
FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The mqueue or nfsd filesystems are examples.
(2) get_tree_bdev()
This effectively works like get_tree_keyed().
The ext4 or xfs filesystems are examples.
(3) get_tree_single()
Only one superblock of this filesystem type can ever exist.
Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock
whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY.
The securityfs or configfs filesystems are examples.
Note that some single-instance filesystems never destroy the
superblock once it has been created during the first mount. For
example, if securityfs has been mounted at least onces then the
created superblock will never be destroyed again as long as there is
still an LSM making use it. Consequently, even if securityfs is
unmounted and the superblock seemingly destroyed it really isn't
which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting
reusing an existing superblock.
This is acceptable thugh since special purpose filesystems such as
this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway
and if they do it's probably to make sure that mount options aren't
ignored.
Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on
filesystems that make use of the low-level sget_fc() helper directly.
They're all effectively variants on get_tree_keyed(), get_tree_bdev(),
or get_tree_nodev():
(5) mtd_get_sb()
Similar logic to get_tree_keyed().
(6) afs_get_tree()
Similar logic to get_tree_keyed().
(7) ceph_get_tree()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev().
(8) fuse_get_tree_submount()
Similar logic to get_tree_nodev().
(9) fuse_get_tree()
Forces reuse of existing FUSE superblock.
Forces reuse of existing superblock if passed in file refers to an
existing FUSE connection.
If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd
referring to an existing FUSE connections this would cause the
superblock reusal to fail. If reusing is the intent then
FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(10) fuse_get_tree()
-> get_tree_nodev()
Same logic as in get_tree_nodev().
(11) fuse_get_tree()
-> get_tree_bdev()
Same logic as in get_tree_bdev().
(12) virtio_fs_get_tree()
Same logic as get_tree_keyed().
(13) gfs2_meta_get_tree()
Forces reuse of existing gfs2 superblock.
Mounting gfs2meta enforces that a gf2s superblock must already
exist. If not, it will error out. Consequently, mounting gfs2meta
with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the
intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified.
(14) kernfs_get_tree()
Similar logic to get_tree_keyed().
(15) nfs_get_tree_common()
Similar logic to get_tree_keyed().
Already explicitly allows forcing the allocation of a new superblock
via NFS_MOUNT_UNSHARED. This effectively turns it into
get_tree_nodev().
Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Eric Garver
|
e7bc7db9ba |
net: openvswitch: add explicit drop action
From: Eric Garver <eric@garver.life> This adds an explicit drop action. This is used by OVS to drop packets for which it cannot determine what to do. An explicit action in the kernel allows passing the reason _why_ the packet is being dropped or zero to indicate no particular error happened (i.e: OVS intentionally dropped the packet). Since the error codes coming from userspace mean nothing for the kernel, we squash all of them into only two drop reasons: - OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed - OVS_DROP_EXPLICIT to indicate a zero value was passed (no error) e.g. trace all OVS dropped skbs # perf trace -e skb:kfree_skb --filter="reason >= 0x30000" [..] 106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \ location:0xffffffffc0d9b462, protocol: 2048, reason: 196611) reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT) Also, this patch allows ovs-dpctl.py to add explicit drop actions as: "drop" -> implicit empty-action drop "drop(0)" -> explicit non-error action drop "drop(42)" -> explicit error action drop Signed-off-by: Eric Garver <eric@garver.life> Co-developed-by: Adrian Moreno <amorenoz@redhat.com> Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Greg Kroah-Hartman
|
e75850b457 |
Merge 6.5-rc6 into char-misc-next
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
22884cf84c |
FSI changes for v6.6
* New drivers for the I2C Responder master and SCOM device * Misc janitor fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmTV7UQACgkQa3ZZB4FH cJ4Mbg//fI3gE56QIsMYNu2YfJb8ZFFH5xD/xn9xwAv34i/XudhX6eCigEHl420Z B/7yPyDePBK8f+Phb9pL1VCovnwdsG/7j3BMtVRV5172bGgkUGpIyNIS7K47/yhJ wRs9qmQsHu3PbKKzStdxxgOOZxiMZc8KzZjDYVBcWmX9RBTe6C4n8WpHbcvI3sIU YTdbfSOyZQIlurJuEtwa7FFOAWUTD66gvvpDWZZn1Ns0hh4WsNWQ0mIqVxVSr8Rl +hISZfBopZMAvMVt8LHvldBUUVAcb9z0KdsAuEe+DXv0uzkTN4FGxFD5YEloGnzR o0eYc7M6vEvH46qhLKYIXRLgLD+SM2+RRhMNaOhxbdVsw7+PWDUz7OWIsoPHmExP 9cmJhZKg/l2JlVPxh+6NOjx2ygK1h0vkADZWc8UoiZD9ZHXFzEYTjuRvaa4YH9HN ENOh3S+9i2Zrue0EWNBSIEaKvKG6h63cUoZSSU4AMtMwC1H5JPKOyYtC+8+oLFsw HmRjxls5zdOLcK9JwPR80xSD/CRadT88qpkvRyFfWyuHenazJzo2HHCgrbVgDXq0 wvR2/c2MWqhZ94LASnd4gpr7MicS1G5FiZn+csKP2dy2Pv4nyDYkOOmrXw8Q/bGZ X88Ohipm9imC0LVIRvXusrmKUUp5dzpQePaQoAaC8/KH8PqRC0U= =FLoZ -----END PGP SIGNATURE----- Merge tag 'fsi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joen writes: FSI changes for v6.6 * New drivers for the I2C Responder master and SCOM device * Misc janitor fixes * tag 'fsi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: fix some spelling mistakes in comment fsi: master-ast-cf: Add MODULE_FIRMWARE macro docs: ABI: fix spelling/grammar in SBEFIFO timeout interface fsi: Add I2C Responder SCOM driver fsi: Add IBM I2C Responder virtual FSI master dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master fsi: Lock mutex for master device registration fsi: Improve master indexing fsi: core: Switch to ida_alloc/free fsi: core: Fix legacy minor numbering fsi: core: Add trace events for scan and unregister fsi: aspeed: Reset master errors after CFAM reset fsi: sbefifo: Remove limits on user-specified read timeout fsi: sbefifo: Add configurable in-command timeout fsi: sbefifo: Don't check status during probe fsi: Use of_match_table for bus matching if specified fsi: Add aliased device numbering fsi: Move fsi_slave structure definition to header fsi: Use of_property_read_reg() to parse "reg" fsi: Explicitly include correct DT includes |
||
|
Mingjia Zhang
|
1dff2beb60 |
media: mediatek: vcodec: Add capture format to support 10bit raster mode
Define one uncompressed capture format V4L2_PIX_FMT_MT2110R in order to support 10bit for H264 in mt8195. Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com> Co-developed-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> |
||
|
Mingjia Zhang
|
6afcc2b0ae |
media: mediatek: vcodec: Add capture format to support 10bit tile mode
Define one uncompressed capture format V4L2_PIX_FMT_MT2110T in order to support 10bit for AV1/VP9/HEVC in mt8195. Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com> Co-developed-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> |
||
|
Breno Leitao
|
8e9fad0e70 |
io_uring: Add io_uring command support for sockets
Enable io_uring commands on network sockets. Create two new SOCKET_URING_OP commands that will operate on sockets. In order to call ioctl on sockets, use the file_operations->io_uring_cmd callbacks, and map it to a uring socket function, which handles the SOCKET_URING_OP accordingly, and calls socket ioctls. This patches was tested by creating a new test case in liburing. Link: https://github.com/leitao/liburing/tree/io_uring_cmd Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230627134424.2784797-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Alan Stern
|
1e4c574225 |
USB: Remove remnants of Wireless USB and UWB
Wireless USB has long been defunct, and kernel support for it was
removed in 2020 by commit
|
||
|
Carlos Maiolino
|
eafc474e20 |
shmem: prepare shmem quota infrastructure
Add new shmem quota format, its quota_format_ops together with dquot_operations Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230725144510.253763-5-cem@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Eddie James
|
19c064defc |
fsi: sbefifo: Add configurable in-command timeout
A new use case for the SBEFIFO requires a long in-command timeout as the SBE processes each part of the command before clearing the upstream FIFO for the next part of the command. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230612195657.245125-6-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
|
Andreas Hindborg
|
29802d7ca3 |
ublk: enable zoned storage support
Add zoned storage support to ublk: report_zones and operations: - REQ_OP_ZONE_OPEN - REQ_OP_ZONE_CLOSE - REQ_OP_ZONE_FINISH - REQ_OP_ZONE_RESET - REQ_OP_ZONE_APPEND The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to communicate ALBA back to the kernel. Therefore ublk must be used with the user copy feature (UBLK_F_USER_COPY) for zoned storage support to be available. Without this feature, ublk will not allow zoned storage support. Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230804114610.179530-4-nmi@metaspace.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jiri Olsa
|
a3c485a5d8 |
bpf: Add support for bpf_get_func_ip helper for uprobe program
Adding support for bpf_get_func_ip helper for uprobe program to return
probed address for both uprobe and return uprobe.
We discussed this in [1] and agreed that uprobe can have special use
of bpf_get_func_ip helper that differs from kprobe.
The kprobe bpf_get_func_ip returns:
- address of the function if probe is attach on function entry
for both kprobe and return kprobe
- 0 if the probe is not attach on function entry
The uprobe bpf_get_func_ip returns:
- address of the probe for both uprobe and return uprobe
The reason for this semantic change is that kernel can't really tell
if the probe user space address is function entry.
The uprobe program is actually kprobe type program attached as uprobe.
One of the consequences of this design is that uprobes do not have its
own set of helpers, but share them with kprobes.
As we need different functionality for bpf_get_func_ip helper for uprobe,
I'm adding the bool value to the bpf_trace_run_ctx, so the helper can
detect that it's executed in uprobe context and call specific code.
The is_uprobe bool is set as true in bpf_prog_run_array_sleepable, which
is currently used only for executing bpf programs in uprobe.
Renaming bpf_prog_run_array_sleepable to bpf_prog_run_array_uprobe
to address that it's only used for uprobes and that it sets the
run_ctx.is_uprobe as suggested by Yafang Shao.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
[1] https://lore.kernel.org/bpf/CAEf4BzZ=xLVkG5eurEuvLU79wAMtwho7ReR+XJAgwhFF4M-7Cg@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-2-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
||
|
Rob Clark
|
05d56d8079 |
dma-buf/sync_file: Fix docs syntax
Fixes the warning:
include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info'
Fixes:
|
||
|
Jakub Kicinski
|
d07b7b32da |
pull-request: bpf-next 2023-08-03
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZMvevwAKCRBar9k/UBDW 42Z0AP90hLZ9OmoghYAlALHLl8zqXuHCV8OeFXR5auqG+kkcCwEAx6h99vnh4zgP Tngj6Yid60o39/IZXXblhV37HfSiyQ8= =/kVE -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2023-08-03 We've added 54 non-merge commits during the last 10 day(s) which contain a total of 84 files changed, 4026 insertions(+), 562 deletions(-). The main changes are: 1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer, Daniel Borkmann 2) Support new insns from cpu v4 from Yonghong Song 3) Non-atomically allocate freelist during prefill from YiFei Zhu 4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu 5) Add tracepoint to xdp attaching failure from Leon Hwang 6) struct netdev_rx_queue and xdp.h reshuffling to reduce rebuild time from Jakub Kicinski * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits) net: invert the netdevice.h vs xdp.h dependency net: move struct netdev_rx_queue out of netdevice.h eth: add missing xdp.h includes in drivers selftests/bpf: Add testcase for xdp attaching failure tracepoint bpf, xdp: Add tracepoint to xdp attaching failure selftests/bpf: fix static assert compilation issue for test_cls_*.c bpf: fix bpf_probe_read_kernel prototype mismatch riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework libbpf: fix typos in Makefile tracing: bpf: use struct trace_entry in struct syscall_tp_t bpf, devmap: Remove unused dtab field from bpf_dtab_netdev bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry netfilter: bpf: Only define get_proto_defrag_hook() if necessary bpf: Fix an array-index-out-of-bounds issue in disasm.c net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn docs/bpf: Fix malformed documentation bpf: selftests: Add defrag selftests bpf: selftests: Support custom type and proto for client sockets bpf: selftests: Support not connecting client socket netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link ... ==================== Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
35b1b1fd96 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c |
||
|
Linus Torvalds
|
999f663186 |
Including fixes from bpf and wireless.
Nothing scary here. Feels like the first wave of regressions
from v6.5 is addressed - one outstanding fix still to come
in TLS for the sendpage rework.
Current release - regressions:
- udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
- dsa: fix older DSA drivers using phylink
Previous releases - regressions:
- gro: fix misuse of CB in udp socket lookup
- mlx5: unregister devlink params in case interface is down
- Revert "wifi: ath11k: Enable threaded NAPI"
Previous releases - always broken:
- sched: cls_u32: fix match key mis-addressing
- sched: bind logic fixes for cls_fw, cls_u32 and cls_route
- add bound checks to a number of places which hand-parse netlink
- bpf: disable preemption in perf_event_output helpers code
- qed: fix scheduling in a tasklet while getting stats
- avoid using APIs which are not hardirq-safe in couple of drivers,
when we may be in a hard IRQ (netconsole)
- wifi: cfg80211: fix return value in scan logic, avoid page
allocator warning
- wifi: mt76: mt7615: do not advertise 5 GHz on first PHY
of MT7615D (DBDC)
Misc:
- drop handful of inactive maintainers, put some new in place
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HYkl
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.
Nothing scary here. Feels like the first wave of regressions from v6.5
is addressed - one outstanding fix still to come in TLS for the
sendpage rework.
Current release - regressions:
- udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
- dsa: fix older DSA drivers using phylink
Previous releases - regressions:
- gro: fix misuse of CB in udp socket lookup
- mlx5: unregister devlink params in case interface is down
- Revert "wifi: ath11k: Enable threaded NAPI"
Previous releases - always broken:
- sched: cls_u32: fix match key mis-addressing
- sched: bind logic fixes for cls_fw, cls_u32 and cls_route
- add bound checks to a number of places which hand-parse netlink
- bpf: disable preemption in perf_event_output helpers code
- qed: fix scheduling in a tasklet while getting stats
- avoid using APIs which are not hardirq-safe in couple of drivers,
when we may be in a hard IRQ (netconsole)
- wifi: cfg80211: fix return value in scan logic, avoid page
allocator warning
- wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
(DBDC)
Misc:
- drop handful of inactive maintainers, put some new in place"
* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
MAINTAINERS: update TUN/TAP maintainers
test/vsock: remove vsock_perf executable on `make clean`
tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
tcp_metrics: annotate data-races around tm->tcpm_net
tcp_metrics: annotate data-races around tm->tcpm_vals[]
tcp_metrics: annotate data-races around tm->tcpm_lock
tcp_metrics: annotate data-races around tm->tcpm_stamp
tcp_metrics: fix addr_same() helper
prestera: fix fallback to previous version on same major version
udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
net/mlx5e: Set proper IPsec source port in L4 selector
net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
net/mlx5: fs_core: Make find_closest_ft more generic
wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
vxlan: Fix nexthop hash size
ip6mr: Fix skb_under_panic in ip6mr_cache_report()
s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
net: tap_open(): set sk_uid from current_fsuid()
net: tun_chr_open(): set sk_uid from current_fsuid()
net: dcb: choose correct policy to parse DCB_ATTR_BCN
...
|
||
|
Rick Edgecombe
|
2fab02b25a |
x86: Add PTRACE interface for shadow stack
Some applications (like GDB) would like to tweak shadow stack state via ptrace. This allows for existing functionality to continue to work for seized shadow stack applications. Provide a regset interface for manipulating the shadow stack pointer (SSP). There is already ptrace functionality for accessing xstate, but this does not include supervisor xfeatures. So there is not a completely clear place for where to put the shadow stack state. Adding it to the user xfeatures regset would complicate that code, as it currently shares logic with signals which should not have supervisor features. Don't add a general supervisor xfeature regset like the user one, because it is better to maintain flexibility for other supervisor xfeatures to define their own interface. For example, an xfeature may decide not to expose all of it's state to userspace, as is actually the case for shadow stack ptrace functionality. A lot of enum values remain to be used, so just put it in dedicated shadow stack regset. The only downside to not having a generic supervisor xfeature regset, is that apps need to be enlightened of any new supervisor xfeature exposed this way (i.e. they can't try to have generic save/restore logic). But maybe that is a good thing, because they have to think through each new xfeature instead of encountering issues when a new supervisor xfeature was added. By adding a shadow stack regset, it also has the effect of including the shadow stack state in a core dump, which could be useful for debugging. The shadow stack specific xstate includes the SSP, and the shadow stack and WRSS enablement status. Enabling shadow stack or WRSS in the kernel involves more than just flipping the bit. The kernel is made aware that it has to do extra things when cloning or handling signals. That logic is triggered off of separate feature enablement state kept in the task struct. So the flipping on HW shadow stack enforcement without notifying the kernel to change its behavior would severely limit what an application could do without crashing, and the results would depend on kernel internal implementation details. There is also no known use for controlling this state via ptrace today. So only expose the SSP, which is something that userspace already has indirect control over. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-41-rick.p.edgecombe%40intel.com |
||
|
Ratheesh Kannoth
|
4c13eda757 |
tc: flower: support for SPI
tc flower rules support to classify ESP/AH packets matching SPI field. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Gavin Li
|
394bd87764 |
virtio_net: support per queue interrupt coalesce command
Add interrupt_coalesce config in send_queue and receive_queue to cache user config. Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM. Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration. Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230731070656.96411-3-gavinl@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniel Xu
|
91721c2d02 |
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
This commit adds support for enabling IP defrag using pre-existing netfilter defrag support. Basically all the flag does is bump a refcnt while the link the active. Checks are also added to ensure the prog requesting defrag support is run _after_ netfilter defrag hooks. We also take care to avoid any issues w.r.t. module unloading -- while defrag is active on a link, the module is prevented from unloading. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/5cff26f97e55161b7d56b09ddcf5f8888a5add1d.1689970773.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Patrick Rohr
|
5027d54a9c |
net: change accept_ra_min_rtr_lft to affect all RA lifetimes
accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.
This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.
In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).
The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.
Fixes:
|
||
|
Linus Torvalds
|
818680d154 |
block-6.5-2023-07-28
-----BEGIN PGP SIGNATURE-----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=TD54
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A few fixes that should go into the current kernel release, mainly:
- Set of fixes for dasd (Stefan)
- Handle interruptible waits returning because of a signal for ublk
(Ming)"
* tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux:
ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV
ublk: fail to recover device if queue setup is interrupted
ublk: fail to start device if queue setup is interrupted
block: Fix a source code comment in include/uapi/linux/blkzoned.h
s390/dasd: print copy pair message only for the correct error
s390/dasd: fix hanging device after request requeue
s390/dasd: use correct number of retries for ERP requests
s390/dasd: fix hanging device after quiesce/resume
|
||
|
Stanislav Fomichev
|
25b5a2a190 |
ynl: regenerate all headers
Also add support to pass topdir to ynl-regen.sh (Jakub) and call it from the makefile to update the UAPI headers. Signed-off-by: Stanislav Fomichev <sdf@google.com> Co-developed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230727163001.3952878-4-sdf@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Nicolin Chen
|
c157fd8861 |
vfio: Support IO page table replacement
Now both the physical path and the emulated path can support an IO page table replacement. Call iommufd_device_replace/iommufd_access_replace(), when vdev->iommufd_attached is true. Also update the VFIO_DEVICE_ATTACH_IOMMUFD_PT kdoc in the uAPI header. Link: https://lore.kernel.org/r/b5f01956ff161f76aa52c95b0fa1ad6eaca95c4a.1690523699.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Eric Dumazet
|
4d50e50045 |
net: flower: fix stack-out-of-bounds in fl_set_key_cfm()
Typical misuse of
nla_parse_nested(array, XXX_MAX, ...);
array must be declared as
struct nlattr *array[XXX_MAX + 1];
v2: Based on feedbacks from Ido Schimmel and Zahari Doychev,
I also changed TCA_FLOWER_KEY_CFM_OPT_MAX and cfm_opt_policy
definitions.
syzbot reported:
BUG: KASAN: stack-out-of-bounds in __nla_validate_parse+0x136/0x2bd0 lib/nlattr.c:588
Write of size 32 at addr ffffc90003a0ee20 by task syz-executor296/5014
CPU: 0 PID: 5014 Comm: syz-executor296 Not tainted 6.5.0-rc2-syzkaller-00307-gd192f5382581 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0x163/0x540 mm/kasan/report.c:475
kasan_report+0x175/0x1b0 mm/kasan/report.c:588
kasan_check_range+0x27e/0x290 mm/kasan/generic.c:187
__asan_memset+0x23/0x40 mm/kasan/shadow.c:84
__nla_validate_parse+0x136/0x2bd0 lib/nlattr.c:588
__nla_parse+0x40/0x50 lib/nlattr.c:700
nla_parse_nested include/net/netlink.h:1262 [inline]
fl_set_key_cfm+0x1e3/0x440 net/sched/cls_flower.c:1718
fl_set_key+0x2168/0x6620 net/sched/cls_flower.c:1884
fl_tmplt_create+0x1fe/0x510 net/sched/cls_flower.c:2666
tc_chain_tmplt_add net/sched/cls_api.c:2959 [inline]
tc_ctl_chain+0x131d/0x1ac0 net/sched/cls_api.c:3068
rtnetlink_rcv_msg+0x82b/0xf50 net/core/rtnetlink.c:6424
netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2549
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x7c3/0x990 net/netlink/af_netlink.c:1365
netlink_sendmsg+0xa2a/0xd60 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x592/0x890 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2577
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f54c6150759
Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe06c30578 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f54c619902d RCX: 00007f54c6150759
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007ffe06c30590 R08: 0000000000000000 R09: 00007ffe06c305f0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54c61c35f0
R13: 00007ffe06c30778 R14: 0000000000000001 R15: 0000000000000001
</TASK>
The buggy address belongs to stack of task syz-executor296/5014
and is located at offset 32 in frame:
fl_set_key_cfm+0x0/0x440 net/sched/cls_flower.c:374
This frame has 1 object:
[32, 56) 'nla_cfm_opt'
The buggy address belongs to the virtual mapping at
[ffffc90003a08000, ffffc90003a11000) created by:
copy_process+0x5c8/0x4290 kernel/fork.c:2330
Fixes:
|
||
|
Yonghong Song
|
1f9a1ea821 |
bpf: Support new sign-extension load insns
Add interpreter/jit support for new sign-extension load insns which adds a new mode (BPF_MEMSX). Also add verifier support to recognize these insns and to do proper verification with new insns. In verifier, besides to deduce proper bounds for the dst_reg, probed memory access is also properly handled. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230728011156.3711870-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jakub Kicinski
|
014acf2668 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jason Gunthorpe
|
7074d7bd67 |
iommufd: Add IOMMU_HWPT_ALLOC
This allows userspace to manually create HWPTs on IOAS's and then use those HWPTs as inputs to iommufd_device_attach/replace(). Following series will extend this to allow creating iommu_domains with driver specific parameters. Link: https://lore.kernel.org/r/17-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Ravi Bangoria
|
526fffabc5 |
perf/mem: Introduce PERF_MEM_LVLNUM_UNC
Older API PERF_MEM_LVL_UNC can be replaced by PERF_MEM_LVLNUM_UNC. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230725150206.184-2-ravi.bangoria@amd.com |
||
|
Kuniyuki Iwashima
|
a0ade8404c |
af_packet: Fix warning of fortified memcpy() in packet_getname().
syzkaller found a warning in packet_getname() [0], where we try to
copy 16 bytes to sockaddr_ll.sll_addr[8].
Some devices (ip6gre, vti6, ip6tnl) have 16 bytes address expressed
by struct in6_addr. Also, Infiniband has 32 bytes as MAX_ADDR_LEN.
The write seems to overflow, but actually not since we use struct
sockaddr_storage defined in __sys_getsockname() and its size is 128
(_K_SS_MAXSIZE) bytes. Thus, we have sufficient room after sll_addr[]
as __data[].
To avoid the warning, let's add a flex array member union-ed with
sll_addr.
Another option would be to use strncpy() and limit the copied length
to sizeof(sll_addr), but it will return the partial address and break
an application that passes sockaddr_storage to getsockname().
[0]:
memcpy: detected field-spanning write (size 16) of single field "sll->sll_addr" at net/packet/af_packet.c:3604 (size 8)
WARNING: CPU: 0 PID: 255 at net/packet/af_packet.c:3604 packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
Modules linked in:
CPU: 0 PID: 255 Comm: syz-executor750 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
lr : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
sp : ffff800089887bc0
x29: ffff800089887bc0 x28: ffff000010f80f80 x27: 0000000000000003
x26: dfff800000000000 x25: ffff700011310f80 x24: ffff800087d55000
x23: dfff800000000000 x22: ffff800089887c2c x21: 0000000000000010
x20: ffff00000de08310 x19: ffff800089887c20 x18: ffff800086ab1630
x17: 20646c6569662065 x16: 6c676e697320666f x15: 0000000000000001
x14: 1fffe0000d56d7ca x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 3e60944c3da92b00
x8 : 3e60944c3da92b00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000898874f8 x4 : ffff800086ac99e0 x3 : ffff8000803f8808
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000000
Call trace:
packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
__sys_getsockname+0x168/0x24c net/socket.c:2042
__do_sys_getsockname net/socket.c:2057 [inline]
__se_sys_getsockname net/socket.c:2054 [inline]
__arm64_sys_getsockname+0x7c/0x94 net/socket.c:2054
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Fixes:
|
||
|
Lorenz Bauer
|
9c02bec959 |
bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign
Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.
The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:
sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed
Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.
Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.
Fixes:
|
||
|
Yi Liu
|
b290a05fd8 |
vfio: Add VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT
This adds ioctl for userspace to attach device cdev fd to and detach
from IOAS/hw_pagetable managed by iommufd.
VFIO_DEVICE_ATTACH_IOMMUFD_PT: attach vfio device to IOAS or hw_pagetable
managed by iommufd. Attach can be undo
by VFIO_DEVICE_DETACH_IOMMUFD_PT or device
fd close.
VFIO_DEVICE_DETACH_IOMMUFD_PT: detach vfio device from the current attached
IOAS or hw_pagetable managed by iommufd.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-24-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
||
|
Yi Liu
|
5fcc26969a |
vfio: Add VFIO_DEVICE_BIND_IOMMUFD
This adds ioctl for userspace to bind device cdev fd to iommufd.
VFIO_DEVICE_BIND_IOMMUFD: bind device to an iommufd, hence gain DMA
control provided by the iommufd. open_device
op is called after bind_iommufd op.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718135551.6592-23-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
||
|
Yi Liu
|
dcc31ea60b |
kvm/vfio: Accept vfio device file from userspace
This defines KVM_DEV_VFIO_FILE* and make alias with KVM_DEV_VFIO_GROUP*. Old userspace uses KVM_DEV_VFIO_GROUP* works as well. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-6-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Yi Liu
|
71791b9246 |
vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET
This is the way user to invoke hot-reset for the devices opened by cdev interface. User should check the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED in the output of VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl before doing hot-reset for cdev devices. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-11-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Yi Liu
|
9062ff405b |
vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdev
This allows VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl use the iommufd_ctx of the cdev device to check the ownership of the other affected devices. When VFIO_DEVICE_GET_PCI_HOT_RESET_INFO is called on an IOMMUFD managed device, the new flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is reported to indicate the values returned are IOMMUFD devids rather than group IDs as used when accessing vfio devices through the conventional vfio group interface. Additionally the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED will be reported in this mode if all of the devices affected by the hot-reset are owned by either virtue of being directly bound to the same iommufd context as the calling device, or implicitly owned via a shared IOMMU group. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-9-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Bart Van Assche
|
e0933b526f |
block: Fix a source code comment in include/uapi/linux/blkzoned.h
Fix the symbolic names for zone conditions in the blkzoned.h header
file.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes:
|
||
|
Patrick Rohr
|
1671bcfd76 |
net: add sysctl accept_ra_min_rtr_lft
This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by: Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Anjali Kulkarni
|
743acf351b |
connector/cn_proc: Performance improvements
This patch adds the capability to filter messages sent by the proc connector on the event type supplied in the message from the client to the connector. The client can register to listen for an event type given in struct proc_input. This event based filteting will greatly enhance performance - handling 8K exits takes about 70ms, whereas 8K-forks + 8K-exits takes about 150ms & handling 8K-forks + 8K-exits + 8K-execs takes 200ms. There are currently 9 different types of events, and we need to listen to all of them. Also, measuring the time using pidfds for monitoring 8K process exits took much longer - 200ms, as compared to 70ms using only exit notifications of proc connector. We also add a new event type - PROC_EVENT_NONZERO_EXIT, which is only sent by kernel to a listening application when any process exiting, has a non-zero exit status. This will help the clients like Oracle DB, where a monitoring process wants notfications for non-zero process exits so it can cleanup after them. This kind of a new event could also be useful to other applications like Google's lmkd daemon, which needs a killed process's exit notification. The patch takes care that existing clients using old mechanism of not sending the event type work without any changes. cn_filter function checks to see if the event type being notified via proc connector matches the event type requested by client, before sending(matches) or dropping(does not match) a packet. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Anjali Kulkarni
|
2aa1f7a1f4 |
connector/cn_proc: Add filtering to fix some bugs
The current proc connector code has the foll. bugs - if there are more than one listeners for the proc connector messages, and one of them deregisters for listening using PROC_CN_MCAST_IGNORE, they will still get all proc connector messages, as long as there is another listener. Another issue is if one client calls PROC_CN_MCAST_LISTEN, and another one calls PROC_CN_MCAST_IGNORE, then both will end up not getting any messages. This patch adds filtering and drops packet if client has sent PROC_CN_MCAST_IGNORE. This data is stored in the client socket's sk_user_data. In addition, we only increment or decrement proc_event_num_listeners once per client. This fixes the above issues. cn_release is the release function added for NETLINK_CONNECTOR. It uses the newly added netlink_release function added to netlink_sock. It will free sk_user_data. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jakub Kicinski
|
59be3baa8d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Aring
|
568f915655 |
fs: dlm: allow to F_SETLKW getting interrupted
This patch implements dlm plock F_SETLKW interruption feature. If a blocking posix lock request got interrupted in user space by a signal a cancellation request for a non granted lock request to the user space lock manager will be send. The user lock manager answers either with zero or a negative errno code. A errno of -ENOENT signals that there is currently no blocking lock request waiting to being granted. In case of -ENOENT it was probably to late to request a cancellation and the pending lock got granted. In any error case we will wait until the lock is being granted as cancellation failed, this causes also that in case of an older user lock manager returning -EINVAL we will wait as cancellation is not supported which should be fine. If a user requires this feature the user should update dlm user space to support lock request cancellation. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Stefan Eichenberger
|
6f1c646d88 |
net: phy: add registers to support 1000BASE-T1
Add registers and definitions to support 1000BASE-T1. This includes the PCS Control and Status registers (3.2304 and 3.2305) as well as some missing bits on the PMA/PMD extended ability register (1.18) and PMA/PMD CTRL (1.2100) register. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Mario Limonciello
|
e2cfe05e92 |
crypto: ccp - Add support for getting and setting DBC parameters
After software has authenticated a dynamic boost control request, it can fetch and set supported parameters using a selection of messages. Add support for these messages and export the ability to do this to userspace. Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Mario Limonciello
|
d9408716d2 |
crypto: ccp - Add support for setting user ID for dynamic boost control
As part of the authentication flow for Dynamic Boost Control, the calling software will need to send a uid used in all of its future communications. Add support for another IOCTL call to let userspace software set this up. Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Mario Limonciello
|
c04cf9e14f |
crypto: ccp - Add support for fetching a nonce for dynamic boost control
Dynamic Boost Control is a feature offered on AMD client platforms that allows software to request and set power or frequency limits. Only software that has authenticated with the PSP can retrieve or set these limits. Create a character device and ioctl for fetching the nonce. This ioctl supports optionally passing authentication information which will influence how many calls the nonce is valid for. Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Jakub Kicinski
|
e93165d5e7 |
for-netdev
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmS4IUIACgkQ6rmadz2v bTrVCw/9GG5A5ebqwoh/DrsFXEzpKDmZFIAWd5wB+Fx2i8y+6Jl/Fw6SjkkAtUnc 215T3YX2u3Xg1WFC5zxY9lYm2OeMq2lPHVwjlqgt/pHE8D6b8cZ44eyN+f0ZSiLy wyx0wHLd3oP4KvMyiqm7/ZmhDjAtBpuqMjY5FNsbUxrIGUUI2ZLC4VFVWhnWmzRA eEOQuUge4e1YD62kfkWlT/GEv710ysqFZD2zs4yhevDfmr/6DAIaA7dhfKMYsM/S hCPoCuuXWVoHiqksm0U1BwpEiAQrqR91Sx8RCAakw5Pyp5hkj9dJc9sLwkgMH/k7 2352IIPXddH8cGKQM+hIBrc/io+6MxMbVk7Pe+1OUIBrvP//zQrHWk0zbssF3D8C z6TbxBLdSzbDELPph3gZu5bNaLSkpuODhNjLcIVGSOeSJ5nsgATCQtXFAAPV0E/Q v2O7Te5aTjTOpFMcIrIK1eWXUS56yRA+YwDa1VuWXAiLrr+Rq0tm4tBqxhof3KlH bfCoqFNa12MfpCJURHICcV7DJo53rWbCtDSJPaYwZXb/jJPd3gPb8EVixoLN2A1M dV/ou9rKEEkJXxsZ4Bctuh7t5YwpqxTq74YSdvnkOJ8P1lBDYST2SfHgQVOayQPv XH9MlMO3Qtb9Sl0ZiI7gHbpK7h6v9RvRuHJcnN2e3wwMEx256xE= =VRCb -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-07-19 We've added 45 non-merge commits during the last 3 day(s) which contain a total of 71 files changed, 7808 insertions(+), 592 deletions(-). The main changes are: 1) multi-buffer support in AF_XDP, from Maciej Fijalkowski, Magnus Karlsson, Tirthendu Sarkar. 2) BPF link support for tc BPF programs, from Daniel Borkmann. 3) Enable bpf_map_sum_elem_count kfunc for all program types, from Anton Protopopov. 4) Add 'owner' field to bpf_rb_node to fix races in shared ownership, Dave Marchevsky. 5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits) bpf, net: Introduce skb_pointer_if_linear(). bpf: sync tools/ uapi header with selftests/bpf: Add mprog API tests for BPF tcx links selftests/bpf: Add mprog API tests for BPF tcx opts bpftool: Extend net dump with tcx progs libbpf: Add helper macro to clear opts structs libbpf: Add link-based API for tcx libbpf: Add opts-based attach/detach/query API for tcx bpf: Add fd-based tcx multi-prog infra with link support bpf: Add generic attach/detach/query API for multi-progs selftests/xsk: reset NIC settings to default after running test suite selftests/xsk: add test for too many frags selftests/xsk: add metadata copy test for multi-buff selftests/xsk: add invalid descriptor test for multi-buffer selftests/xsk: add unaligned mode test for multi-buffer selftests/xsk: add basic multi-buffer test selftests/xsk: transmit and receive multi-buffer packets xsk: add multi-buffer documentation i40e: xsk: add TX multi-buffer support ice: xsk: Tx multi-buffer support ... ==================== Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
bfa3037d82 |
fuse update for 6.5
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZJLBrQAKCRDh3BK/laaZ PMGXAQC+EWva3wi86A4MeRAGtVnpQyKeFKRsBjEpU2MKdhvVhQEAn5eCsQAtt/R/ +1WmLVF2uAweoG6eXBKnWx7537dbQAs= =MdDc -----END PGP SIGNATURE----- Merge tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Small but important fixes and a trivial cleanup" * tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: ioctl: translate ENOSYS in outarg fuse: revalidate: don't invalidate if interrupted fuse: Apply flags2 only when userspace set the FUSE_INIT_EXT fuse: remove duplicate check for nodeid fuse: add feature flag for expire-only |
||
|
Daniel Borkmann
|
e420bed025 |
bpf: Add fd-based tcx multi-prog infra with link support
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Daniel Borkmann
|
053c8e1f23 |
bpf: Add generic attach/detach/query API for multi-progs
This adds a generic layer called bpf_mprog which can be reused by different
attachment layers to enable multi-program attachment and dependency resolution.
In-kernel users of the bpf_mprog don't need to care about the dependency
resolution internals, they can just consume it with few API calls.
The initial idea of having a generic API sparked out of discussion [0] from an
earlier revision of this work where tc's priority was reused and exposed via
BPF uapi as a way to coordinate dependencies among tc BPF programs, similar
as-is for classic tc BPF. The feedback was that priority provides a bad user
experience and is hard to use [1], e.g.:
I cannot help but feel that priority logic copy-paste from old tc, netfilter
and friends is done because "that's how things were done in the past". [...]
Priority gets exposed everywhere in uapi all the way to bpftool when it's
right there for users to understand. And that's the main problem with it.
The user don't want to and don't need to be aware of it, but uapi forces them
to pick the priority. [...] Your cover letter [0] example proves that in
real life different service pick the same priority. They simply don't know
any better. Priority is an unnecessary magic that apps _have_ to pick, so
they just copy-paste and everyone ends up using the same.
The course of the discussion showed more and more the need for a generic,
reusable API where the "same look and feel" can be applied for various other
program types beyond just tc BPF, for example XDP today does not have multi-
program support in kernel, but also there was interest around this API for
improving management of cgroup program types. Such common multi-program
management concept is useful for BPF management daemons or user space BPF
applications coordinating internally about their attachments.
Both from Cilium and Meta side [2], we've collected the following requirements
for a generic attach/detach/query API for multi-progs which has been implemented
as part of this work:
- Support prog-based attach/detach and link API
- Dependency directives (can also be combined):
- BPF_F_{BEFORE,AFTER} with relative_{fd,id} which can be {prog,link,none}
- BPF_F_ID flag as {fd,id} toggle; the rationale for id is so that user
space application does not need CAP_SYS_ADMIN to retrieve foreign fds
via bpf_*_get_fd_by_id()
- BPF_F_LINK flag as {prog,link} toggle
- If relative_{fd,id} is none, then BPF_F_BEFORE will just prepend, and
BPF_F_AFTER will just append for attaching
- Enforced only at attach time
- BPF_F_REPLACE with replace_bpf_fd which can be prog, links have their
own infra for replacing their internal prog
- If no flags are set, then it's default append behavior for attaching
- Internal revision counter and optionally being able to pass expected_revision
- User space application can query current state with revision, and pass it
along for attachment to assert current state before doing updates
- Query also gets extension for link_ids array and link_attach_flags:
- prog_ids are always filled with program IDs
- link_ids are filled with link IDs when link was used, otherwise 0
- {prog,link}_attach_flags for holding {prog,link}-specific flags
- Must be easy to integrate/reuse for in-kernel users
The uapi-side changes needed for supporting bpf_mprog are rather minimal,
consisting of the additions of the attachment flags, revision counter, and
expanding existing union with relative_{fd,id} member.
The bpf_mprog framework consists of an bpf_mprog_entry object which holds
an array of bpf_mprog_fp (fast-path structure). The bpf_mprog_cp (control-path
structure) is part of bpf_mprog_bundle. Both have been separated, so that
fast-path gets efficient packing of bpf_prog pointers for maximum cache
efficiency. Also, array has been chosen instead of linked list or other
structures to remove unnecessary indirections for a fast point-to-entry in
tc for BPF.
The bpf_mprog_entry comes as a pair via bpf_mprog_bundle so that in case of
updates the peer bpf_mprog_entry is populated and then just swapped which
avoids additional allocations that could otherwise fail, for example, in
detach case. bpf_mprog_{fp,cp} arrays are currently static, but they could
be converted to dynamic allocation if necessary at a point in future.
Locking is deferred to the in-kernel user of bpf_mprog, for example, in case
of tcx which uses this API in the next patch, it piggybacks on rtnl.
An extensive test suite for checking all aspects of this API for prog-based
attach/detach and link API comes as BPF selftests in this series.
Thanks also to Andrii Nakryiko for early API discussions wrt Meta's BPF prog
management.
[0] https://lore.kernel.org/bpf/20221004231143.19190-1-daniel@iogearbox.net
[1] https://lore.kernel.org/bpf/CAADnVQ+gEY3FjCR=+DmjDR4gp5bOYZUFJQXj4agKFHT9CQPZBw@mail.gmail.com
[2] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230719140858.13224-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Maciej Fijalkowski
|
13ce2daa25 |
xsk: add new netlink attribute dedicated for ZC max frags
Introduce new netlink attribute NETDEV_A_DEV_XDP_ZC_MAX_SEGS that will carry maximum fragments that underlying ZC driver is able to handle on TX side. It is going to be included in netlink response only when driver supports ZC. Any value higher than 1 implies multi-buffer ZC support on underlying device. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230719132421.584801-11-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tirthendu Sarkar
|
81470b5c3c |
xsk: introduce XSK_USE_SG bind flag for xsk socket
As of now xsk core drops any xdp_buff with data size greater than the xsk frame_size as set by the af_xdp application. With multi-buffer support introduced in the next patch xsk core can now split those buffers into multiple descriptors provided the af_xdp application can handle them. Such capability of the application needs to be independent of the xdp_prog's frag support capability since there are cases where even a single xdp_buffer may need to be split into multiple descriptors owing to a smaller xsk frame size. For e.g., with NIC rx_buffer size set to 4kB, a 3kB packet will constitute of a single buffer and so will be sent as such to AF_XDP layer irrespective of 'xdp.frags' capability of the XDP program. Now if the xsk frame size is set to 2kB by the AF_XDP application, then the packet will need to be split into 2 descriptors if AF_XDP application can handle multi-buffer, else it needs to be dropped. Applications can now advertise their frag handling capability to xsk core so that xsk core can decide if it should drop or split xdp_buffs that exceed xsk frame size. This is done using a new 'XSK_USE_SG' bind flag for the xdp socket. Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Link: https://lore.kernel.org/r/20230719132421.584801-3-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tirthendu Sarkar
|
63a64a56bc |
xsk: prepare 'options' in xdp_desc for multi-buffer use
Use the 'options' field in xdp_desc as a packet continuity marker. Since 'options' field was unused till now and was expected to be set to 0, the 'eop' descriptor will have it set to 0, while the non-eop descriptors will have to set it to 1. This ensures legacy applications continue to work without needing any change for single-buffer packets. Add helper functions and extend xskq_prod_reserve_desc() to use the 'options' field. Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Link: https://lore.kernel.org/r/20230719132421.584801-2-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Ido Schimmel
|
29cfb2aaa4 |
bridge: Add backup nexthop ID support
Add a new bridge port attribute that allows attaching a nexthop object
ID to an skb that is redirected to a backup bridge port with VLAN
tunneling enabled.
Specifically, when redirecting a known unicast packet, read the backup
nexthop ID from the bridge port that lost its carrier and set it in the
bridge control block of the skb before forwarding it via the backup
port. Note that reading the ID from the bridge port should not result in
a cache miss as the ID is added next to the 'backup_port' field that was
already accessed. After this change, the 'state' field still stays on
the first cache line, together with other data path related fields such
as 'flags and 'vlgrp':
struct net_bridge_port {
struct net_bridge * br; /* 0 8 */
struct net_device * dev; /* 8 8 */
netdevice_tracker dev_tracker; /* 16 0 */
struct list_head list; /* 16 16 */
long unsigned int flags; /* 32 8 */
struct net_bridge_vlan_group * vlgrp; /* 40 8 */
struct net_bridge_port * backup_port; /* 48 8 */
u32 backup_nhid; /* 56 4 */
u8 priority; /* 60 1 */
u8 state; /* 61 1 */
u16 port_no; /* 62 2 */
/* --- cacheline 1 boundary (64 bytes) --- */
[...]
} __attribute__((__aligned__(8)));
When forwarding an skb via a bridge port that has VLAN tunneling
enabled, check if the backup nexthop ID stored in the bridge control
block is valid (i.e., not zero). If so, instead of attaching the
pre-allocated metadata (that only has the tunnel key set), allocate a
new metadata, set both the tunnel key and the nexthop object ID and
attach it to the skb.
By default, do not dump the new attribute to user space as a value of
zero is an invalid nexthop object ID.
The above is useful for EVPN multihoming. When one of the links
composing an Ethernet Segment (ES) fails, traffic needs to be redirected
towards the host via one of the other ES peers. For example, if a host
is multihomed to three different VTEPs, the backup port of each ES link
needs to be set to the VXLAN device and the backup nexthop ID needs to
point to an FDB nexthop group that includes the IP addresses of the
other two VTEPs. The VXLAN driver will extract the ID from the metadata
of the redirected skb, calculate its flow hash and forward it towards
one of the other VTEPs. If the ID does not exist, or represents an
invalid nexthop object, the VXLAN driver will drop the skb. This
relieves the bridge driver from the need to validate the ID.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Dave Marchevsky
|
c3c510ce43 |
bpf: Add 'owner' field to bpf_{list,rb}_node
As described by Kumar in [0], in shared ownership scenarios it is
necessary to do runtime tracking of {rb,list} node ownership - and
synchronize updates using this ownership information - in order to
prevent races. This patch adds an 'owner' field to struct bpf_list_node
and bpf_rb_node to implement such runtime tracking.
The owner field is a void * that describes the ownership state of a
node. It can have the following values:
NULL - the node is not owned by any data structure
BPF_PTR_POISON - the node is in the process of being added to a data
structure
ptr_to_root - the pointee is a data structure 'root'
(bpf_rb_root / bpf_list_head) which owns this node
The field is initially NULL (set by bpf_obj_init_field default behavior)
and transitions states in the following sequence:
Insertion: NULL -> BPF_PTR_POISON -> ptr_to_root
Removal: ptr_to_root -> NULL
Before a node has been successfully inserted, it is not protected by any
root's lock, and therefore two programs can attempt to add the same node
to different roots simultaneously. For this reason the intermediate
BPF_PTR_POISON state is necessary. For removal, the node is protected
by some root's lock so this intermediate hop isn't necessary.
Note that bpf_list_pop_{front,back} helpers don't need to check owner
before removing as the node-to-be-removed is not passed in as input and
is instead taken directly from the list. Do the check anyways and
WARN_ON_ONCE in this unexpected scenario.
Selftest changes in this patch are entirely mechanical: some BTF
tests have hardcoded struct sizes for structs that contain
bpf_{list,rb}_node fields, those were adjusted to account for the new
sizes. Selftest additions to validate the owner field are added in a
further patch in the series.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Andrei Vagin
|
48a1084a8b |
seccomp: add the synchronous mode for seccomp_unotify
seccomp_unotify allows more privileged processes do actions on behalf of less privileged processes. In many cases, the workflow is fully synchronous. It means a target process triggers a system call and passes controls to a supervisor process that handles the system call and returns controls to the target process. In this context, "synchronous" means that only one process is running and another one is waiting. There is the WF_CURRENT_CPU flag that is used to advise the scheduler to move the wakee to the current CPU. For such synchronous workflows, it makes context switches a few times faster. Right now, each interaction takes 12µs. With this patch, it takes about 3µs. This change introduce the SECCOMP_USER_NOTIF_FD_SYNC_WAKE_UP flag that it used to enable the sync mode. Signed-off-by: Andrei Vagin <avagin@google.com> Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Link: https://lore.kernel.org/r/20230308073201.3102738-5-avagin@google.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Jens Axboe
|
f77569d22a |
io_uring/cancel: wire up IORING_ASYNC_CANCEL_OP for sync cancel
Allow usage of IORING_ASYNC_CANCEL_OP through the sync cancelation API as well. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
d7b8b079a8 |
io_uring/cancel: support opcode based lookup and cancelation
Add IORING_ASYNC_CANCEL_OP flag for cancelation, which allows the application to target cancelation based on the opcode of the original request. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
8165b56604 |
io_uring/cancel: add IORING_ASYNC_CANCEL_USERDATA
Add a flag to explicitly match on user_data in the request for cancelation purposes. This is the default behavior if none of the other match flags are set, but if we ALSO want to match on user_data, then this flag can be set. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Chris Lew
|
5550201c0f |
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
Add RPMSG_GET_OUTGOING_FLOWCONTROL and RPMSG_SET_INCOMING_FLOWCONTROL IOCTL support for rpmsg char device nodes to get/set the low level transport signals. Signed-off-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com> Signed-off-by: Sarannya S <quic_sarannya@quicinc.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/1688679698-31274-4-git-send-email-quic_sarannya@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Miaohe Lin
|
ceddae22cd |
cgroup: remove obsolete comment above struct cgroupstats
There's no flag in the delay accounting structure indicates that the task
is waiting on IO since commit
|
||
|
Jakub Kicinski
|
d2afa89f66 |
for-netdev
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmSwqwoACgkQ6rmadz2v bTqOHRAAn+fzTLqUqsveFQcxOkie5MPHxKoOTjG4+yFR7rzPkU6Mn5RX3w5yFzSn RqutwykF9OgipAzC3QXv4pRJuq6Gia5nvwUSDP4CX273ljyeF54DK7HfopE1+YrK HXyBWZvVvMZP6q7qQyQ3qtbHZSjs5XP/M6YBlJ5zo/BTLFCyvbSDP14YKEqcBkWG ld72ElXFxlnr/zEfRjzBCfMlbmgeHLO0SiHS/9827zEmNP1AAH5/ETA7/rJ7yCJs QNQUIoJWob8xm5FMJ6CU/+sOqXR1CY053meGJFFBX5pvVD/CLRhrwHn0IMCyQqmh wKR5waeXhpl/CKNeFuxXVMNFiXbqBb/0LYJaJtrMysjMLTsQ9X7NkrDBa/+kYGyZ +ghGlaMQvPqUGg0rLH2nl9JNB8Ne/8prLMsAKUWnPuOo+Q03j054gnqhGeNtDd5b gpSk+7x93PlhGcegBV1Wk8dkiGC5V9nTVNxg40XQUCs4k9L/8Vjc35Tjqx7nBTNH DiFD24DDKUZacw9L6nEqvLF/N2fiRjtUZnVPC0yn/annyBcfX1s+ZH2Tu1F6Qk38 QMfBCnt12exmsiDoxdzzGJtjHnS/k5fsaKjlR21mOyMrIH7ipltr5UHHrdr1hBP6 24uSeTImvQQKDi+9IuXN127jZDOupKqVS6csrA0ZXrlKWh2HR+U= =GVUB -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-07-13 We've added 67 non-merge commits during the last 15 day(s) which contain a total of 106 files changed, 4444 insertions(+), 619 deletions(-). The main changes are: 1) Fix bpftool build in presence of stale vmlinux.h, from Alexander Lobakin. 2) Introduce bpf_me_mcache_free_rcu() and fix OOM under stress, from Alexei Starovoitov. 3) Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling, from Andrii Nakryiko. 4) Introduce bpf map element count, from Anton Protopopov. 5) Check skb ownership against full socket, from Kui-Feng Lee. 6) Support for up to 12 arguments in BPF trampoline, from Menglong Dong. 7) Export rcu_request_urgent_qs_task, from Paul E. McKenney. 8) Fix BTF walking of unions, from Yafang Shao. 9) Extend link_info for kprobe_multi and perf_event links, from Yafang Shao. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (67 commits) selftests/bpf: Add selftest for PTR_UNTRUSTED bpf: Fix an error in verifying a field in a union selftests/bpf: Add selftests for nested_trust bpf: Fix an error around PTR_UNTRUSTED selftests/bpf: add testcase for TRACING with 6+ arguments bpf, x86: allow function arguments up to 12 for TRACING bpf, x86: save/restore regs with BPF_DW size bpftool: Use "fallthrough;" keyword instead of comments bpf: Add object leak check. bpf: Convert bpf_cpumask to bpf_mem_cache_free_rcu. bpf: Introduce bpf_mem_free_rcu() similar to kfree_rcu(). selftests/bpf: Improve test coverage of bpf_mem_alloc. rcu: Export rcu_request_urgent_qs_task() bpf: Allow reuse from waiting_for_gp_ttrace list. bpf: Add a hint to allocated objects. bpf: Change bpf_mem_cache draining process. bpf: Further refactor alloc_bulk(). bpf: Factor out inc/dec of active flag into helpers. bpf: Refactor alloc_bulk(). bpf: Let free_all() return the number of freed elements. ... ==================== Link: https://lore.kernel.org/r/20230714020910.80794-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Yafang Shao
|
1b715e1b0e |
bpf: Support ->fill_link_info for perf_event
By introducing support for ->fill_link_info to the perf_event link, users gain the ability to inspect it using `bpftool link show`. While the current approach involves accessing this information via `bpftool perf show`, consolidating link information for all link types in one place offers greater convenience. Additionally, this patch extends support to the generic perf event, which is not currently accommodated by `bpftool perf show`. While only the perf type and config are exposed to userspace, other attributes such as sample_period and sample_freq are ignored. It's important to note that if kptr_restrict is not permitted, the probed address will not be exposed, maintaining security measures. A new enum bpf_perf_event_type is introduced to help the user understand which struct is relevant. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230709025630.3735-9-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yafang Shao
|
7ac8d0d261 |
bpf: Support ->fill_link_info for kprobe_multi
With the addition of support for fill_link_info to the kprobe_multi link, users will gain the ability to inspect it conveniently using the `bpftool link show`. This enhancement provides valuable information to the user, including the count of probed functions and their respective addresses. It's important to note that if the kptr_restrict setting is not permitted, the probed address will not be exposed, ensuring security. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230709025630.3735-2-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
8fc3b8f082 |
hardening fixes for v6.5-rc1
- Check for NULL bdev in LoadPin (Matthias Kaehlcke) - Revert unwanted KUnit FORTIFY build default - Fix 1-element array causing boot warnings with xhci-hub -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmSoVSsWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJjyuD/9Sgr+T3VJyROJdKouYO8tLUqaO g0A6+WE0L7XyO4ZYk4FOadeihsVEPuhB0fpDTwriKCKdPB35+Nhq8YfWPPQcGdjQ 0IAT5AjsjYDDFGABRtsNRcL+KXyR+QRVUnSllEsZuwb3lyq6HRbdTF2QBjToAbyO QOgEnFJNqPp2w9y2KSzpMuYL4I9o1WbyM+huVSfoKe/3d2WnVKiARMpV+0EJgUAy BvORp55+c1w77IRbQduACWszdCLXfkQyI+p5ii3M7cZmePDe4q8LHN01WtIMEnHy cln7AnwU4daxzfdeAWIQMLFjOXTLHlkRhC18KSobeBc5Zkudtcg5LxtFGiDsDgOU mUWB/Ow8rgr6KlYkMFmFrW/GAVX12KbPXDATECa/4Yhl55Ydl/1bChJWWnX2pppU mRRnwIcY7MfhRLeB284Gst81wOHy408arJsm/vck5kdya0Ys1y38rgNQm7iKfXVu FYMrDU9qqGmeIVk2namjQYoWH5ei670PXndtrcvSffeZOhpzk2FnFphtraPe0mrl l1lcUonZwEoTJ4wDiOR9cjSphoDVom9LgwygQVb4KGHBjuCfRABDV2DGy9duBMtv Akcet48VkCX6wF91+30fFmTs5haRiF/5kkx5fGuxhFlQO8QHYVjIOH55VqhAt3mw d0OWiZaNRvbNfjPSkQ== =R3uK -----END PGP SIGNATURE----- Merge tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Check for NULL bdev in LoadPin (Matthias Kaehlcke) - Revert unwanted KUnit FORTIFY build default - Fix 1-element array causing boot warnings with xhci-hub * tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array Revert "fortify: Allow KUnit test to build without FORTIFY" dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter |
||
|
Kees Cook
|
01f23c5f15 |
usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
Since commit
|
||
|
Linus Torvalds
|
15ac468614 |
media updates for v6.5-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmSlDSsACgkQCF8+vY7k 4RXm5Q/+IvIzEr2CBTmIvSXOdLjXiBvIB/tGCJ5617K7AWpASodm5BJLgJwJrLhi JZc12iXSJIwx+7YUVTYoBzf5AnQcXLmKx+MdPmks5AZeMxErPCnTIrUDZYCKogYg P0vt0HYmDgz0iMObrvnnZN5yXEUVqoWtob5sJSrgxin9cRGyWkE1B8PFNf+jHZXm /PWYSfQK4epbXKSYklJz5rTKdx+TIqSpv88EeFlB0QAZgRWbkkWUNutmtQm+nLRD vk70Uwgj8kUcY9A4A2YlWhojtt1T7YEhrfBUwtR+86wvNtcpTR0VHoQGydYiQD8u 5Ydut+5+94RzyIJI8IISSuFUyc0cOj4PO7UU9xULVoytsxgTN0ocC8+k9eAXw4Uc IMQM2OZsKFRIJ1Mrk8at0a5zij8zCMl1bveqvwdzSmAgN1mc9WgQEXOGFuWlAKMX D0nODJeyTvUQF7Z29LaYTKXjrP02aHN97dkS12jRIFQ3CQ7pIugIUxW2RC+Hqlk5 +R9UN933Ag0Gzd5giOQ1/iWCrFj1iI8j6VXF24bT9UGpJjAS0raevnUwoIQfloge SGqWM+s4/XZYyZh1nI1AaM/Y8C/W9ieF4WLX1sqA+407CgMSIVO0BA7QC/SOz3jn 5qp+C+NRudsig4+D8Kljr5CenPN9Jh2fwLbvpTFT4O2IWpx+OlA= =YwIy -----END PGP SIGNATURE----- Merge tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Lots of improvement at atomisp driver, which is starting to look in good shape - Mediatek vcodec driver has gained support for av1 and hevc stateless codecs - New sensor driver: ov01a10 - verisilicon driver has gained AV1 entropy helpers - tegra-video has gained support for Tegra20 parallel input - dvb core has gained an extra property to better support DVB-S2X - as usual, lots of cleanups, fixes and improvements on media drivers * tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits) media: wl128x: fix a clang warning media: dvb: mb86a20s: get rid of a clang-15 warning media: cec: i2c: ch7322: also select REGMAP media: add HAS_IOPORT dependencies media: tc358746: select CONFIG_GENERIC_PHY media: mediatek: vcodec: Add dbgfs help function media: mediatek: vcodec: Add encode to support dbgfs media: mediatek: vcodec: Change dbgfs interface to support encode media: mediatek: vcodec: Get each instance format type media: mediatek: vcodec: Get each context resolution information media: mediatek: vcodec: Add a debugfs file to get different useful information media: mediatek: vcodec: Add debug params to control different log level media: mediatek: vcodec: Add debugfs interface to get debug information media: mediatek: vcodec: support stateless AV1 decoder media: verisilicon: Conditionally ignore native formats media: verisilicon: Enable AV1 decoder on rk3588 media: verisilicon: Add film grain feature to AV1 driver media: verisilicon: Add Rockchip AV1 decoder media: verisilicon: Add AV1 entropy helpers media: verisilicon: Compute motion vectors size for AV1 frames ... |
||
|
Linus Torvalds
|
406fb9eb19 |
firewire updates for 6.5-rc1
The updates consist of three parts; UAPI update, OHCI driver update, and several bug fixes. Firstly, the 1394 OHCI specification defines method to retrieve hardware time stamps for asynchronous communication, which was previously unavailable in user space. This change adds new events to the UAPI, allowing applications to retrieve the time when asynchronous packet are received and sent. The new events are tested in the breeding edge of libhinawa and look to work well. The new version of libhinawa will be released after current merge window is closed. * https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/ Secondly, the FireWire stack includes a PCM device driver for 1394 OHCI hardware, This change modernizes the driver by managed resource (devres) framework. Lastly, the rest of change is bug fixes for firewire-net and firewire-core. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZKQI3wAKCRCsLtaWM8Lw ExxhAP9rgLdnERNyL0Pw5PoNM71KBXVLYn35UasDZiyraq5UHQEAmptFKIXCwPLY /kw3oumcKTEbYCiiI94JAesfFX/fRw0= =LT8K -----END PGP SIGNATURE----- Merge tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "This consist of three parts; UAPI update, OHCI driver update, and several bug fixes. Firstly, the 1394 OHCI specification defines method to retrieve hardware time stamps for asynchronous communication, which was previously unavailable in user space. This adds new events to the UAPI, allowing applications to retrieve the time when asynchronous packet are received and sent. The new events are tested in the bleeding edge of libhinawa and look to work well. The new version of libhinawa will be released after current merge window is closed: https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/ Secondly, the FireWire stack includes a PCM device driver for 1394 OHCI hardware, This change modernizes the driver by managed resource (devres) framework. Lastly, bug fixes for firewire-net and firewire-core" * tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (25 commits) firewire: net: fix use after free in fwnet_finish_incoming_packet() firewire: core: obsolete usage of GFP_ATOMIC at building node tree firewire: ohci: release buffer for AR req/resp contexts when managed resource is released firewire: ohci: use devres for content of configuration ROM firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts firewire: ohci: use devres for list of isochronous contexts firewire: ohci: use devres for requested IRQ firewire: ohci: use devres for misc DMA buffer firewire: ohci: use devres for MMIO region mapping firewire: ohci: use devres for PCI-related resources firewire: ohci: use devres for memory object of ohci structure firewire: fix warnings to generate UAPI documentation firewire: fix build failure due to missing module license firewire: cdev: implement new event relevant to phy packet with time stamp firewire: cdev: add new event to notify phy packet with time stamp firewire: cdev: code refactoring to dispatch event for phy packet firewire: cdev: implement new event to notify response subaction with time stamp firewire: cdev: add new event to notify response subaction with time stamp firewire: cdev: code refactoring to operate event of response firewire: core: implement variations to send request and wait for response with time stamp ... |
||
|
Linus Torvalds
|
e50df24979 |
block-6.5-2023-07-03
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmSjJ2IQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpsQMEACQiUBw81tXvetYhz3P/4KrrjvUobgqMU0w jtrxqMgPee9FbqCShpj76c+La5wu23DnlrCXoHZxFQuiQLnsX5xFV66NYVi+W1CN k5MHP7f2e9V0T7qJ9UoHFRV1k22LF4X6T8njEZimxsm/uXfpav/knkhI7nUDnB1K wxlu9akD2Bo/X9O2NTS+X6qjoawZ6rDWN15THMXlC45VzJPLmIcs07Ev+mvw21KE XqasoZrxEO0S8dWxmJgJGqnRIOQptTS5U+0OPBZT8H220Qp/1q0pQHPw6iLXNrkc w1a2W1Bge012gjJt7gCMkdDnZb76sKiyGuMbFME7DoRbLCQeaOtoSfmg7NoRI2gp 74TCSr7dPWZUVUy5Tmsy0DCv0552vIbnlQ69W6Xwx8YkplM3FPiMpWrQ5JWEHdvv Zl84mLP6Yyo54JVuk9zi8q/2L0HfyfMDj4UM/mNs8hwmcUSbPO2TKdIWDaq8xPuS Ed+D+kg6XFux8tLnCSDLNbaD5JE+ak9gTVhNdRa/zFE04o/OeidscKEqRSYTkdXL 2p34qtw5kEQocO4Pa3eUGO6KJCDTR36Rms5p6ZFybL4O2oZYrAbRi1TGDxaG2Hag GCr2vaFbmz1zbGuMpFhLha5B7HeDLs+PHOn+B1iUNjEr9RC0EOHV7moJKqjxlnCh 4mBkK/Nlyg== =kSeX -----END PGP SIGNATURE----- Merge tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux Pull more block updates from Jens Axboe: "Mostly items that came in a bit late for the initial pull request, wanted to make sure they had the appropriate amount of linux-next soak before going upstream. Outside of stragglers, just generic fixes for either merge window items, or longer standing bugs" * tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux: (25 commits) md/raid0: add discard support for the 'original' layout nvme: disable controller on reset state failure nvme: sync timeout work on failed reset nvme: ensure unquiesce on teardown cdrom/gdrom: Fix build error nvme: improved uring polling block: add request polling helper nvme-mpath: fix I/O failure with EAGAIN when failing over I/O nvme: host: fix command name spelling blk-sysfs: add a new attr_group for blk_mq blk-iocost: move wbt_enable/disable_default() out of spinlock blk-wbt: cleanup rwb_enabled() and wbt_disabled() blk-wbt: remove dead code to handle wbt enable/disable with io inflight blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled blk-mq: fix two misuses on RQF_USE_SCHED blk-throttle: Fix io statistics for cgroup v1 bcache: Fix bcache device claiming bcache: Alloc holder object before async registration raid10: avoid spin_lock from fastpath from raid10_unplug() md: fix 'delete_mutex' deadlock ... |
||
|
Linus Torvalds
|
a8d70602b1 |
virtio: features, fixes, cleanups
resume support in vdpa/solidrun structure size optimizations in virtio_pci new pds_vdpa driver immediate initialization mechanism for vdpa/ifcvf interrupt bypass for vdpa/mlx5 multiple worker support for vhost viirtio net in Intel F2000X-PL support for vdpa/ifcvf fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSi95cPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpJ58H/A++mwjLsoiJ/3xgf2S2Fn0p0lkgxg61LrjD Q9p8zstG/BndRvv018XcJKoklaHpb4WcmNctKRNZJ6BjPj+ZwdADuSzoaUNurPD4 M3s/nXVWvg7/2FifGDpCzQpyw0MR0Ip6/yqtdTl4vuLZGxI1nNGDfYbDgc3vZeCp pYTLsl/XUPzix4iJouEQqy5rmlUia3IE751aECrdk58z17lDo/Znar4hsXF0acQY +G6C/MNZQgf1rtJIl901h54W8rAoubxeda80uXSQk9fDyPG/wZYh2wFBGPi9qYa+ 9E+tOgHprMZ7G5GEopDdd19UctuW7M+YXPWZa1ijp8EZXmMpzuo= =5tdF -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - resume support in vdpa/solidrun - structure size optimizations in virtio_pci - new pds_vdpa driver - immediate initialization mechanism for vdpa/ifcvf - interrupt bypass for vdpa/mlx5 - multiple worker support for vhost - viirtio net in Intel F2000X-PL support for vdpa/ifcvf - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits) vhost: Make parameter name match of vhost_get_vq_desc() vduse: fix NULL pointer dereference vhost: Allow worker switching while work is queueing vhost_scsi: add support for worker ioctls vhost: allow userspace to create workers vhost: replace single worker pointer with xarray vhost: add helper to parse userspace vring state/file vhost: remove vhost_work_queue vhost_scsi: flush IO vqs then send TMF rsp vhost_scsi: convert to vhost_vq_work_queue vhost_scsi: make SCSI cmd completion per vq vhost_sock: convert to vhost_vq_work_queue vhost: convert poll work to be vq based vhost: take worker or vq for flushing vhost: take worker or vq instead of dev for queueing vhost, vhost_net: add helper to check if vq has work vhost: add vhost_worker pointer to vhost_virtqueue vhost: dynamically allocate vhost_worker vhost: create worker at end of vhost_dev_set_owner virtio_bt: call scheduler when we free unused buffs ... |
||
|
Linus Torvalds
|
e8069f5a8e |
ARM64:
* Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the stage-2
fault path.
* Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
* Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
* Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
* Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
* Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
* Ensure timer IRQs are consistently released in the init failure
paths.
* Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
* Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
RISC-V:
* Redirect AMO load/store misaligned traps to KVM guest
* Trap-n-emulate AIA in-kernel irqchip for KVM guest
* Svnapot support for KVM Guest
s390:
* New uvdevice secret API
* CMM selftest and fixes
* fix racy access to target CPU for diag 9c
x86:
* Fix missing/incorrect #GP checks on ENCLS
* Use standard mmu_notifier hooks for handling APIC access page
* Drop now unnecessary TR/TSS load after VM-Exit on AMD
* Print more descriptive information about the status of SEV and SEV-ES during
module load
* Add a test for splitting and reconstituting hugepages during and after
dirty logging
* Add support for CPU pinning in demand paging test
* Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
* Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage
recovery threads (because nx_huge_pages=off can be toggled at runtime)
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups, fixes and comments
Generic:
* Miscellaneous bugfixes and cleanups
Selftests:
* Generate dependency files so that partial rebuilds work as expected
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSgHrIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroORcAf+KkBlXwQMf+Q0Hy6Mfe0OtkKmh0Ae
6HJ6dsuMfOHhWv5kgukh+qvuGUGzHq+gpVKmZg2yP3h3cLHOLUAYMCDm+rjXyjsk
F4DbnJLfxq43Pe9PHRKFxxSecRcRYCNox0GD5UYL4PLKcH0FyfQrV+HVBK+GI8L3
FDzUcyJkR12Lcj1qf++7fsbzfOshL0AJPmidQCoc6wkLJpUEr/nYUqlI1Kx3YNuQ
LKmxFHS4l4/O/px3GKNDrLWDbrVlwciGIa3GZLS52PZdW3mAqT+cqcPcYK6SW71P
m1vE80VbNELX5q3YSRoOXtedoZ3Pk97LEmz/xQAsJ/jri0Z5Syk0Ok0m/Q==
=AMXp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
|
||
|
Linus Torvalds
|
56cbceab92 |
USB / Thunderbolt driver updates for 6.5-rc1
Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the hardware
in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKcVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEIQCgzJgnMCB81mirXlY1ZpCSDFqN8KIAnjRc27/1
vnUzldMQGY/FiS549gD9
=G3yz
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
|
||
|
Linus Torvalds
|
44aeec836d |
Char/Misc and other driver subsystem updates for 6.5-rc1
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
|
||
|
Mike Christie
|
228a27cf78 |
vhost: Allow worker switching while work is queueing
This patch drops the requirement that we can only switch workers if work has not been queued by using RCU for the vq based queueing paths and a mutex for the device wide flush. We can also use this to support SIGKILL properly in the future where we should exit almost immediately after getting that signal. With this patch, when get_signal returns true, we can set the vq->worker to NULL and do a synchronize_rcu to prevent new work from being queued to the vhost_task that has been killed. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230626232307.97930-18-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Mike Christie
|
c1ecd8e950 |
vhost: allow userspace to create workers
For vhost-scsi with 3 vqs or more and a workload that tries to use them in parallel like: fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \ --ioengine=libaio --iodepth=128 --numjobs=3 the single vhost worker thread will become a bottlneck and we are stuck at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are used. To better utilize virtqueues and available CPUs, this patch allows userspace to create workers and bind them to vqs. You can have N workers per dev and also share N workers with M vqs on that dev. This patch adds the interface related code and the next patch will hook vhost-scsi into it. The patches do not try to hook net and vsock into the interface because: 1. multiple workers don't seem to help vsock. The problem is that with only 2 virtqueues we never fully use the existing worker when doing bidirectional tests. This seems to match vhost-scsi where we don't see the worker as a bottleneck until 3 virtqueues are used. 2. net already has a way to use multiple workers. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230626232307.97930-16-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Linus Torvalds
|
170ab6c51a |
flexible-array transformations for 6.5-rc1
Hi Linus, Please, pull the following patch that transforms a zero-length array into a C99 flexible-array member. This patch has been baking in linux-next for a while. Also, this addresses a build failure with Clang[1] by fixing multiple -Warray-bounds warnings in drivers/staging/ks7010/ks_wlan_net.c[2]. Link: https://linux.kernelci.org/build/next/branch/master/kernel/next-20230524/ [1] Link: https://github.com/ClangBuiltLinux/linux/issues/1851 [2] Thanks -- Gustavo Changes in v2: - Remove media-venus patch from the pull-request. v1: - Link: https://lore.kernel.org/linux-hardening/ZJxZJDUDs1ry84Rc@work/ -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmSfAd0ACgkQRwW0y0cG 2zHFrw/9EOPY8tjUpbaMKhCzbpT1HzYWy6aGG0YobkeuKyUehUoRGFsjA/dvpziV 3XFWmZE+gDKcbm+Odwnw/2uSZzFCjC+oXyWEztOLx/yY8mSLv2CZxQc+3lzVcJeT Fcat1TrQ6lNR3DIWmYI+80IqEnCfxOjAgnJld4wv0PUVck5nttMbqNmhMF/NZK8S 0uUCw1hS1OMGSRYx/K/1oCgXnQQZfn7pFZG6A3jQtd/F2sF1cQu5AZmamq5t/v2Y dWIsrZfaaEDd7u2NJ0EubCYd/tQ3lgPleJJ2aNBmL4xMmojkRzAZYOUABMPTdy52 G60QHGLcPfRhhDCXOjs7Cgp13dtg4YjA1c26oy14fdCBEIMHom64ptFEfge+tlTg P6dMwnRux8jKDLUlPK1Xqm2m1Dp5M4SzbsEE80WebDJ+rqXJxK/olqGBRZhUpr2E 2kZIvlYpiEhoBIPviei2NDalHTkrpcSYT64Fm9M396Womr0cfdQfXrhMtNGRoNDQ 1nCa1WH8BrK23CAdFhN9e88lCMj9xFOHRMYBad5tVCvTTd/bJ+41j+Cywtdf1qIR 1Oybu+5lAnIGrF+mguqaURnKwAElv6HlHR/9jFALcYeP/NeleNj05YgI3gbXmmID R0RS2IgVr2RZD5ATE9JIo5XQZqPbv4JASmtg3IJ47YQS/Iy28XQ= =wDkd -----END PGP SIGNATURE----- Merge tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array update from Gustavo Silva: "Transform a zero-length array into a C99 flexible-array member. This addresses a build failure with Clang by fixing multiple '-Warray-bounds' warnings in drivers/staging/ks7010/ks_wlan_net.c" * tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: uapi: wireless: Replace zero-length array with flexible-array member |
||
|
Paolo Bonzini
|
d74669ebae |
Common KVM changes for 6.5:
- Fix unprotected vcpu->pid dereference via debugfs - Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals - Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code - Misc cleanups -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmSaFkUSHHNlYW5qY0Bn b29nbGUuY29tAAoJEGCRIgFNDBL5BYQP/j3BOjShMl1q7jOf+eaE6ro48ffHmPxk ujMLS1bMXY1PT937gG1uHokNp4GaotKJXILVwSFUYcrkR8LKtfou31/X9OPhUIMT nf0BBRS2KpvZSHfeqrYc0eUMgZKSkAjmtwU5Hob+EdisUZ0yT9kO3Sr4fvSqDd65 2fvcCcOdKccKfmuUQQ6a3zJBV7FDJeGAZ3GSF7eb6MzpPyRMbMu+w4K0i6AKc4uA F2U3a4DB8uH++JVwZVfBla0Rz8wvarGiIE5FRonistDTJYLzhY+VypiBHFc+mcyp KqX3TxXClndlZolqOyvFFkiIcNBFOfPJ0O5gk4whFRR3dS70Y9Ji1/Gzm9S8w52h 3Q16wLbUzyFONxznB2THTU6W+9ZKKRAPVP5R6/xkqZgnr+qWxfMQD7cNGgHuK3Nv QyNF2K1/FUrxdIkPzKa/UWDRX8rwjTDdASxLA9Zl8uP7qmfJGSWIRfjljgJYuAkr D37lDNzeoxkmuMeAQ2Rcpn1ghYOG6tm5OdZdkzjQdBjlugOTQOsZ05c/Ab2mSThy h7K6okw5a4gjsfuxCepnbmbUJ3IDedbRYzKtzwhoYuLZ/qf2F5NqbXMXpiyvHYTJ fAZpkKkF5adgagz2kU57nqzb1W0uWZdASQCXXIdEN8QdyQe/FGqgxMWKEOaywB32 C/fdKRFQoCyL =EGXd -----END PGP SIGNATURE----- Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEAD Common KVM changes for 6.5: - Fix unprotected vcpu->pid dereference via debugfs - Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals - Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code - Misc cleanups |
||
|
Paolo Bonzini
|
cc744042d9 |
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZJWrhwAKCRCivnWIJHzd
Fs07AP9xliv5yIoQtRgPZXc0QDPyUm7zg8f5KDgqCVJtyHXcvAEAmmerBr39nbPc
XoMXALKx6NGt836P0C+bhvRcHdFPGwE=
=c/Xh
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
|
||
|
Paolo Bonzini
|
b5396271ea |
KVM/riscv changes for 6.5
- Redirect AMO load/store misaligned traps to KVM guest - Trap-n-emulate AIA in-kernel irqchip for KVM guest - Svnapot support for KVM Guest -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmSUUnoACgkQrUjsVaLH LAchmw//aKApCr6hOUehE0WCrG2QJedco0nghwwBlRLM2FSzACKsinRDcq3ey/jx OsJ03LpOM9I3ucpy7SBirqJq06dxWtFITVtWGKA3CKVncH9rPdsSmiDc7LbiDUt9 HxAZa9katL1c/DyFWiBKa520FZ4qVySJ0i+gCHF6DhrDdySbUqJTgqqMzRSpz8Ei RGDtn/156X5gtCuAs4CMIT1N/r1oyhd1s9y9/Cmy7PYMJcqpBZQu9n+5c9ss/Xz4 CJ+kiMBZIH61oeUwVSp/sz3aWc50OkX8zcoGtbsEcZvqVrdPl98aaJliVb6MiUXT PGxQqRxgFGHOlOpzpdBdiUVWT0NJCZGVXNS3/zHh37fccHVE0rJUClJAtz9PzCKq XfUSlx2tx99tnbO8zyqqT8aRwfV0jKcYXTcy4spBj6tEelubhXkuirck60Ny1Ywc ced6mXAfpHe/Dl6vn91OwE4Xk+EDXBpE+8YZVIms6lc3URzub8Y7dIrB+XZzHSKj JRV4mtsLtLDX6oLKvqJVZu+OIY5n3h9KWbuA4+LknQOVWCac24+kyI2sSGLOUu/f B806qzhmZeNRaM2IRsmUT6h6uaWcdCfnd06rrKsAhyc9ZlCpFvE1NYkAwM7rSvWb L6WiSv+1T8W1b6LP2WUDzfZNe79Vv5ZMu0V4VBPonuF2mvi1r6g= =nK7C -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.5-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.5 - Redirect AMO load/store misaligned traps to KVM guest - Trap-n-emulate AIA in-kernel irqchip for KVM guest - Svnapot support for KVM Guest |
||
|
Linus Torvalds
|
b25f62ccb4 |
VFIO updates for v6.5-rc1
- Adjust log levels for common messages. (Oleksandr Natalenko,
Alex Williamson)
- Support for dynamic MSI-X allocation. (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities.
(Alex Williamson)
- Cleanup Kconfigs for vfio bus drivers. (Alex Williamson)
- Add support for CDX bus based devices. (Nipun Gupta)
- Fix race with concurrent mdev initialization. (Eric Farman)
-----BEGIN PGP SIGNATURE-----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=TOvh
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Adjust log levels for common messages (Oleksandr Natalenko, Alex
Williamson)
- Support for dynamic MSI-X allocation (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities (Alex
Williamson)
- Cleanup Kconfigs for vfio bus drivers (Alex Williamson)
- Add support for CDX bus based devices (Nipun Gupta)
- Fix race with concurrent mdev initialization (Eric Farman)
* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Move the compat_class initialization to module init
vfio/cdx: add support for CDX bus
vfio/fsl: Create Kconfig sub-menu
vfio/platform: Cleanup Kconfig
vfio/pci: Cleanup Kconfig
vfio/pci-core: Add capability for AtomicOp completer support
vfio/pci: Also demote hiding standard cap messages
vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
vfio/pci: Support dynamic MSI-X
vfio/pci: Probe and store ability to support dynamic MSI-X
vfio/pci: Use bitfield for struct vfio_pci_core_device flags
vfio/pci: Update stale comment
vfio/pci: Remove interrupt context counter
vfio/pci: Use xarray for interrupt context storage
vfio/pci: Move to single error path
vfio/pci: Prepare for dynamic interrupt context storage
vfio/pci: Remove negative check on unsigned vector
vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
vfio/pci: demote hiding ecap messages to debug level
|
||
|
Linus Torvalds
|
9070577ae9 |
pci-v6.5-changes
-----BEGIN PGP SIGNATURE-----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=xpTd
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
||
|
Linus Torvalds
|
ca7ce08d6a |
SCSI misc on 20230629
Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx). We have a couple of major core changes impacting
other systems: Command Duration Limits, which spills into block and
ATA and block level Persistent Reservation Operations, which touches
block, nvme, target and dm (both of which are added with merge commits
containing a cover letter explaining what's going on).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZJ19cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfZpAQCQBuWR
ELcOhsaG5KzO6xLWcH8mjsOoxffKvazZjTKXlAD5ATEv7++E250oKS3t+yfjae5I
Lc195MlDju85ItUQgfk=
=U9ik
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
||
|
Linus Torvalds
|
533925cb76 |
RISC-V Patches for the 6.5 Merge Window, Part 1
* Support for ACPI. * Various cleanups to the ISA string parsing, including making them case-insensitive * Support for the vector extension. * Support for independent irq/softirq stacks. * Our CPU DT binding now has "unevaluatedProperties: false" -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmSe70ATHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiWNPD/0ZfSdQ0A/gMVOzAD4zFKPEqQ6ffW2V Zy6Jo7UDNqKsiai7QA4XB1uyYIv/y1yUKJ0oeBVcA9Nzyq+TW9QDcApDBTabxAUI agY19YKw6VVZ+p7I9sMsf6EbdJdkNfSAzcQACPxb4ScEoaf9X+oAK5qgXuRuWluh qQuVkkJlgWc/t1cuUkrRdJmHQYvjP3zL7z4o344q2IVpXJkNNu0GeP+HbF8BYKcA +I/TTA5JY3kCIaxkpF2rU6pE6T5T9xrPmRYZ7bZoPUPnbL+M8As/jx3ym52Y4WGp kf8pgkxixOjU64kVJOH66CA8GaOiaAH/ptjQb0ZmCaGrHhr7aOT9HrkX4rU1lS8T stPphfM4gGPcCoPgRqSl+mEhBzjII8maOBLtbricAoQi6efRq8fzoOGaif/QpCbc 6n0LGS4nQPGVyD3rAPfHxxfrlGJR+SsgyDvjZoDhqauFglims14GnK+eBeO8zrui Aj/uuAS63VIYprJWC1NOBJlU2WKZiOGhCANpZ6W6SH21PYn2WjsVILqaGh+WN8ZO KOHxZNaN8fQag0Yg7oNAUb7l6S0DHYtJIksFnFW2Rf2+VT58RAMYRQbpbhr7Tqr+ jLgIR8PkFrBERHE49IqLGhAxGDnNzAUysMRw9pIk7WIre2Jt4wPqUdl+ee+5ErIX jiYfSFZw9q28UA== =Fpq8 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for ACPI - Various cleanups to the ISA string parsing, including making them case-insensitive - Support for the vector extension - Support for independent irq/softirq stacks - Our CPU DT binding now has "unevaluatedProperties: false" * tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits) riscv: hibernate: remove WARN_ON in save_processor_state dt-bindings: riscv: cpus: switch to unevaluatedProperties: false dt-bindings: riscv: cpus: add a ref the common cpu schema riscv: stack: Add config of thread stack size riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK RISC-V: always report presence of extensions formerly part of the base ISA dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support RISC-V: remove decrement/increment dance in ISA string parser RISC-V: rework comments in ISA string parser RISC-V: validate riscv,isa at boot, not during ISA string parsing RISC-V: split early & late of_node to hartid mapping RISC-V: simplify register width check in ISA string parsing perf: RISC-V: Limit the number of counters returned from SBI riscv: replace deprecated scall with ecall riscv: uprobes: Restore thread.bad_cause riscv: mm: try VMA lock-based page fault handling first riscv: mm: Pre-allocate PGD entries for vmalloc/modules area RISC-V: hwprobe: Expose Zba, Zbb, and Zbs RISC-V: Track ISA extensions per hart ... |
||
|
Linus Torvalds
|
d8b0bd57c2 |
powerpc updates for 6.5
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations.
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and use
the -mprofile-kernel option (kernel specific ftrace ABI) for big endian
ELFv2 kernels.
- Add initial Dynamic Execution Control Register (DEXCR) support, and allow
the ROP protection instructions to be used on Power 10.
- Various other small features and fixes.
Thanks to: Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean Delvare,
Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry, Nathan
Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul Gortmaker, Randy
Dunlap, Rob Herring, Rohan McLure, Russell Currey, Sachin Sant, Timothy
Pearson, Tom Rix, Uwe Kleine-König.
-----BEGIN PGP SIGNATURE-----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=ssit
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
|
||
|
Linus Torvalds
|
18c9901d74 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmScTY8ACgkQnJ2qBz9k QNnfwwgAhZtow1klDLH6qCnWMufB6AwT7VfAHyA3fvyTYMjUKb0sGHkpuh8hqVOb Lzb4YB+jSWV8XnMFn/4gFJQU/nAv8bMPavghMGpr5VNjQi7WkxYF/GB6O1I5NOHK EnJjDExgdxXDJZORaaXLVJWrtzJuDFgdiSeIwJECFa0MdTHNgPy3XOl+PPxnYQ/V xyHyP5ImGgd5O4iy3PFDQBGgOXIMrBX8IMce+qLQNYIvjSIUgmdnIkoUCvsQiisp LyKI2LxqAqnpA4h4Ow6hOZDw2VlPT0vDwFVUfFIZMIqs5YgaSbWa1Z6cs37MigAn fgUyRVx2y8A2Lwla7rwLaUEToRVADw== =ZdcG -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: - Support for fanotify events returning file handles for filesystems not exportable via NFS - Improved error handling exportfs functions - Add missing FS_OPEN events when unusual open helpers are used * tag 'fsnotify_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: move fsnotify_open() hook into do_dentry_open() exportfs: check for error return value from exportfs_encode_*() fanotify: support reporting non-decodeable file handles exportfs: allow exporting non-decodeable file handles to userspace exportfs: add explicit flag to request non-decodeable file handles exportfs: change connectable argument to bit flags |
||
|
Linus Torvalds
|
1b722407a1 |
drm changes for 6.5-rc1:
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmSc3UwACgkQDHTzWXnE
hr69fQ/+PF9L7FSB/qfjaoqJnk6wJyCehv7pDX2/UK7FUrW0e4EwNVx4KKIRqO/P
pKSU9wRlC72ViGgqOYnw0pwzuh45630vWo1stbgxipU2cvM6Ywlq8FiQFdymFe+P
tLYWe5MR55Y+E9Y+bCrKn2yvQ7v+f6EZ6ITIX7mrXL77Bpxhv58VzmZawkxmw5MV
vwhSqJaaeeWNoyfSIDdN8Oj9fE6ScTyiA0YisOP6jnK/TiQofXQxFrMIdKctCcoA
HjolfEEPVCDOSBipkV3hLiyN8lXmt47BmuHp9opSL/g1aASteVeD1/GrccTaA4xV
ah+Jx1hBLcH5sm8CZzbCcHhNu3ILnPCFZFCx8gwflQqmDIOZvoMdL75j7lgqJZG8
TePEiifG3kYO/ZiDc5TUBdeMfbgeehPOsxbvOlA3LxJrgyxe/5o9oejX2Uvvzhoq
9fno1PLqeCILqYaMiCocJwyTw/2VKYCCH7Wiypd4o3h0nmAbbqPT3KeZgNOjoa2X
GXpiIU9rTQ8LZgSmOXdCt2rc9Jb6q+eCiDgrZzAukbP8veQyOvO16Nx1+XzLhOYc
BfjEOoA7nBJD+UPLWkwj42gKtoEWN7IOMTHgcK11d8jdpGISGupl/1nntGhYk0jO
+3RRZXMB/Gjwe9ge4K9bFC81pbfuAE7ELQtPsgV9LapMmWHKccY=
=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
||
|
Linus Torvalds
|
3a8a670eee |
Networking changes for 6.5.
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
||
|
Keith Busch
|
9408d8a37e |
nvme: improved uring polling
Drivers can poll requests directly, so use that. We just need to ensure the driver's request was allocated from a polled hctx, so a special driver flag is added to struct io_uring_cmd. The allows unshared and multipath namespaces to use the same polling callback, and multipath is guaranteed to get the same queue as the command was submitted on. Previously multipath polling might check a different path and poll the wrong info. The other bonus is we don't need a bio payload in order to poll, allowing commands like 'flush' and 'write zeroes' to be submitted on the same high priority queue as read and write commands. Finally, using the request based polling skips the unnecessary bio overhead. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230612190343.2087040-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
84fccbba93 |
spi: Updates for v6.5
One small core feature this time around but mostly driver improvements
and additions for SPI:
- Add support for controlling the idle state of MOSI, some systems can
support this and depending on the system integration may need it to
avoid glitching in some situations.
- Support for polling mode in the S3C64xx driver and DMA on the
Qualcomm QSPI driver.
- Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
Evans, Renesas RZ/V2M, and ST STM32H7.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkwMACgkQJNaLcl1U
h9AOOAf+NNDaxD7ymIZ4t9RVegbC7aCS/kGWCEr2bunAfSQYI7UhduOK1U5q9mq3
pZy3ZT0Rm+5gm1jg4WSgozM2Sn/OljTUyUFgWvxS9oF/EUSLiHpwvJAo01Y6dZsF
ZNVCB5RuhXr++i0wgR5HSAaMd8XQAp9H2OEO4wYynFHm3zX1bMtnybZuI1AKJbKF
fBAhKRpemSxklL+oQru1FudJEyglJcRDXYtESDPpAvU0aEdoPekdZbbS2f99SX7k
s5jojrnwViIRSqMLqTIDu2sNUcuCn883GPzKOtU0hexE2Y+90q7gzjnustVN93w/
uyVKsVSegb5poA1HMlK/fu2Pp3oolg==
=SJMZ
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small core feature this time around but mostly driver improvements
and additions for SPI:
- Add support for controlling the idle state of MOSI, some systems
can support this and depending on the system integration may need
it to avoid glitching in some situations
- Support for polling mode in the S3C64xx driver and DMA on the
Qualcomm QSPI driver
- Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
Evans, Renesas RZ/V2M, and ST STM32H7"
* tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
spi: dt-bindings: atmel,at91rm9200-spi: fix broken sam9x7 compatible
spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible
spi: Add support for Renesas CSI
spi: dt-bindings: Add bindings for RZ/V2M CSI
spi: sun6i: Use the new helper to derive the xfer timeout value
spi: atmel: Prevent false timeouts on long transfers
spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7
spi: Create a helper to derive adaptive timeouts
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
spi: stm32: disable spi-slave property for stm32f4-f7
spi: stm32: introduction of stm32h7 SPI device mode support
spi: stm32: use dmaengine_terminate_{a}sync instead of _all
spi: stm32: renaming of spi_master into spi_controller
spi: dw: Remove misleading comment for Mount Evans SoC
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for Intel Mount Evans SoC
spi: dw: Add compatible for Intel Mount Evans SoC
spi: s3c64xx: Use dev_err_probe()
spi: s3c64xx: Use the managed spi master allocation function
spi: spl022: Probe defer is no error
spi: spi-imx: fix mixing of native and gpio chipselects for imx51/imx53/imx6 variants
...
|
||
|
Linus Torvalds
|
6e17c6de3d |
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing. - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability. - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning. - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface. - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree. - Johannes Weiner has done some cleanup work on the compaction code. - David Hildenbrand has contributed additional selftests for get_user_pages(). - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code. - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code. - Huang Ying has done some maintenance on the swap code's usage of device refcounting. - Christoph Hellwig has some cleanups for the filemap/directio code. - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses. - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings. - John Hubbard has a series of fixes to the MM selftesting code. - ZhangPeng continues the folio conversion campaign. - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock. - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8. - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management. - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code. - Vishal Moola also has done some folio conversion work. - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh J0qXCzqaaN8+BuEyLGDVPaXur9KirwY= =B7yQ -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ... |
||
|
Linus Torvalds
|
582c161cf3 |
hardening updates for v6.5-rc1
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmSbftQWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJj0MD/9X9jzJzCmsAU+yNldeoAzC84Sk GVU3RBxGcTNysL1gZXynkIgigw7DWc4htMGeSABHHwQRVP65JCH1Kw/VqIkyumbx 9LdX6IklMJb4pRT4PVU3azebV4eNmSjlur2UxMeW54Czm91/6I8RHbJOyAPnOUmo 2oomGdP/hpEHtKR7hgy8Axc6w5ySwQixh2V5sVZG3VbvCS5WKTmTXbs6puuRT5hz iHt7v+7VtEg/Qf1W7J2oxfoghvVBsaRrSLrExWT/oZYh1ZxM7DsCAAoG/IsDgHGA 9LBXiRECgAFThbHVxLvvKZQMXdVk0i8iXLX43XMKC0wTA+NTyH7wlcQQ4RWNMuo8 sfA9Qm9gMArXaf64aymr3Uwn20Zan0391HdlbhOJZAE6v3PPJbleUnM58AzD2d3r 5Lz6AIFBxDImy+3f9iDWgacCT5/PkeiXTHzk9QnKhJyKKtRA58XJxj4q2+rPnGJP n4haXqoxD5FJbxdXiGKk31RS0U5HBug7wkOcUrTqDHUbc/QNU2b7dxTKUx+zYtCU uV5emPzpF4H4z+91WpO47n9gkMAfwV0lt9S2dwS8pxsgqctbmIan+Jgip7rsqZ2G OgLXBsb43eEs+6WgO8tVt/ZHYj9ivGMdrcNcsIfikzNs/xweUJ53k2xSEn2xEa5J cwANDmkL6QQK7yfeeg== =s0j1 -----END PGP SIGNATURE----- Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit |
||
|
Linus Torvalds
|
d416a46c95 |
execve updates for v6.5-rc1
- Fix a few comments for correctness and typos (Baruch Siach) - Small simplifications for binfmt (Christophe JAILLET) - Set p_align to 4 for PT_NOTE in core dump (Fangrui Song) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmSbc94WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkWaEACb5idNLPHL5lb7zr1HGXWVnpo9 3a4gwNpZpDpODRSL5VQ93WUwzN+74hN15h85orXbjQRZRXJVM4gNmgHargqs4LIb LrbB04ylCoAnz+MYPAPkD0Yw4WZXqwK33V11V8luUf9q+zFemjQ0rOzFDmrX5a+y qxq8CvY/jETmi5GPzKn35w8gJs8X++8GPIQ0ZDeQzYGZsZZ4m0+f1tqsC9bOmn/F LRn0ePaSTrYPQILQ2xVjlCv9HHk8MUsJu7+eyOI0NemWlITookofkycjMDe+9LpS hRKhdNbni24BEN2eDdJNC5TeXlvAOEQv4n4GFZ37sUQGdDhjdQTYF9sySluX5+Bo fx0qCQyWJMoskYBbBTAERv9hBxZctU94k82XaUxZA1bx0f9h+0USqwL9YrOnF5p/ 4734FUjeotGd8uFpUe/B6/SjRQ6WwYzwoEME/5Q/EKuotLrk3SfLu3fH/rl3cGH8 mlt4vwD0xDfFgb4Pj5wf8lqxpK+mMCusExqvzKVVV4L7Q5gDIntA2BvSRykjQ7VD vwRaQDM9mnDD/t0FgDVVHl91UF5Fsctf81UvfoI5eIMKqFo3NRGCV8znFf8G8//i 8Qmjj4kpxN+zMOi4nKsTjNDFmauRmOrGaDrWZnyO3m/VlYrYodnCKJbdLsqWH4zx a2O3oVICYLUeM0NEkQ== =01FE -----END PGP SIGNATURE----- Merge tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Fix a few comments for correctness and typos (Baruch Siach) - Small simplifications for binfmt (Christophe JAILLET) - Set p_align to 4 for PT_NOTE in core dump (Fangrui Song) * tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: fix comment typo s/reset/regset/ elf: correct note name comment binfmt: Slightly simplify elf_fdpic_map_file() binfmt: Use struct_size() coredump, vmcore: Set p_align to 4 for PT_NOTE |
||
|
Linus Torvalds
|
21953eb16c |
lsm/stable-6.5 PR 20230626
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmSZuh0UHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNpuxAAxChGqME9nE7iITx1TaFRrbK49mDF 1RZh/5cwzde72lLLFkTFKB6ErMSQkrrtA+jFH7vKsrOslBel1+yO80vkXmhYCeZU P3m0FeREUpuU4QV0tbQamPeR+SWohmKi2dYWd+VdpLA+1aTK3KNYsi2NFkDIreap BqeRq4S0Rqc4u3/5juk6JCGFhTRWaH16YJQrzIKHF/K3DK+gMhAY5sjuAWzFc6ma /5bbD55kdVVDfnsxNSe+lzJ7zEf7TYedLG6BN+R9cVrU+El12a38M29kASaAof5w vpb92a27hA9Q5EyQ2O9QXnr2L5CShT4bvAZCGkK4cmZerGNTdM0iojhYj1s7FAV/ USkWgkDmEuSatp0+DdXlfQyUmZZWlw1W0oiEfZwR8w7TY7q9CU7aD8K7+GDSIazB g89nYznVjlaC/oA4/owMraoWP3eiDiAcsQdO052Vv63TVyJtTiRiKyBq5EFLrX8L iaUCa4cBaYFc94kN1PZeNXZKwqRc2F6oAFT1YuXnFWBGmixN0kUL023C0xjl/J7P 02jYYSVzLm22aU39GU0DSnaLfAwl3muazOB3XuyGOhUWHFYzjkc9UhmGp0W50DkK qigW3ONA8s8CKUS/q7QSGq+Vf+CVZA5f+daDDPGYstPfCTk61eu0wjwfwek3W0o+ xKzBr2Od3vTOzAs= =3nWy -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - A SafeSetID patch to correct what appears to be a cut-n-paste typo in the code causing a UID to be printed where a GID was desired. This is coming via the LSM tree because we haven't been able to get a response from the SafeSetID maintainer (Micah Morton) in several months. Hopefully we are able to get in touch with Micah, but until we do I'm going to pick them up in the LSM tree. - A small fix to the reiserfs LSM xattr code. We're continuing to work through some issues with the reiserfs code as we try to fixup the LSM xattr handling, but in the process we're uncovering some ugly problems in reiserfs and we may just end up removing the LSM xattr support in reiserfs prior to reiserfs' removal. For better or worse, this shouldn't impact any of the reiserfs users, as we discovered that LSM xattrs on reiserfs were completely broken, meaning no one is currently using the combo of reiserfs and a file labeling LSM. - A tweak to how the cap_user_data_t struct/typedef is declared in the header file to appease the Sparse gods. - In the process of trying to sort out the SafeSetID lost-maintainer problem I realized that I needed to update the labeled networking entry to "Supported". - Minor comment/documentation and spelling fixes. * tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: device_cgroup: Fix kernel-doc warnings in device_cgroup SafeSetID: fix UID printed instead of GID MAINTAINERS: move labeled networking to "supported" capability: erase checker warnings about struct __user_cap_data_struct lsm: fix a number of misspellings reiserfs: Initialize sec->length in reiserfs_security_init(). capability: fix kernel-doc warnings in capability.c |
||
|
Linus Torvalds
|
6a46676994 |
s390 updates for 6.5 merge window
- Fix the style of protected key API driver source: use x-mas tree for all local variable declarations. - Rework protected key API driver to not use the struct pkey_protkey and pkey_clrkey anymore. Both structures have a fixed size buffer, but with the support of ECC protected key these buffers are not big enough. Use dynamic buffers internally and transparently for userspace. - Add support for a new 'non CCA clear key token' with ECC clear keys supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448. This makes it possible to derive a protected key from the ECC clear key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way to derive is via PCKMO instruction. - The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t for reference counting. Replace this with the proper data type refcount_t. - Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since gcc generates inefficient code, which may lead to stack overflows. - Replace one-element array with flexible-array member in struct vfio_ccw_parent and refactor the rest of the code accordingly. Also, prefer struct_size() over sizeof() open- coded versions. - Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the system memory should be cleared or not once dumped. - Fix a hang when a user attempts to remove a VFIO-AP mediated device attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback to request a release of the device. - Fix calculation for R_390_GOTENT relocations for modules. - Allow any user space process with CAP_PERFMON capability read and display the CPU Measurement facility counter sets. - Rework large statically-defined per-CPU cpu_cf_events data structure and replace it with dynamically allocated structures created when a perf_event_open() system call is invoked or /dev/hwctr device is accessed. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZJsnCRccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8D+RAQCN5CYdql/X8kOMcs4jJvDHEZf8 5CHYfmT2SLNs+zWtLgD/f/C9XXv3El/0wMBvuWSZ+T1nw+imt2cz+FJ+Nor+UQg= =R7Dm -----END PGP SIGNATURE----- Merge tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix the style of protected key API driver source: use x-mas tree for all local variable declarations - Rework protected key API driver to not use the struct pkey_protkey and pkey_clrkey anymore. Both structures have a fixed size buffer, but with the support of ECC protected key these buffers are not big enough. Use dynamic buffers internally and transparently for userspace - Add support for a new 'non CCA clear key token' with ECC clear keys supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448. This makes it possible to derive a protected key from the ECC clear key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way to derive is via PCKMO instruction - The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t for reference counting. Replace this with the proper data type refcount_t - Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since gcc generates inefficient code, which may lead to stack overflows - Replace one-element array with flexible-array member in struct vfio_ccw_parent and refactor the rest of the code accordingly. Also, prefer struct_size() over sizeof() open- coded versions - Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the system memory should be cleared or not once dumped - Fix a hang when a user attempts to remove a VFIO-AP mediated device attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback to request a release of the device - Fix calculation for R_390_GOTENT relocations for modules - Allow any user space process with CAP_PERFMON capability read and display the CPU Measurement facility counter sets - Rework large statically-defined per-CPU cpu_cf_events data structure and replace it with dynamically allocated structures created when a perf_event_open() system call is invoked or /dev/hwctr device is accessed * tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process s390/module: fix rela calculation for R_390_GOTENT s390/vfio-ap: wire in the vfio_device_ops request callback s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl s390/pkey: add support for ecc clear key s390/pkey: do not use struct pkey_protkey s390/pkey: introduce reverse x-mas trees s390/zcore: conditionally clear memory on reipl s390/ipl: add REIPL_CLEAR flag to os_info vfio/ccw: use struct_size() helper vfio/ccw: replace one-element array with flexible-array member s390: select ARCH_SUPPORTS_INT128 s390/pai_ext: replace atomic_t with refcount_t s390/pai_crypto: replace atomic_t with refcount_t |
||
|
Linus Torvalds
|
bc6cb4d5bc |
Locking changes for v6.5:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
||
|
Jakub Kicinski
|
61dc651cdf |
netfilter pull request 23-06-26
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmSZMg8ACgkQ1V2XiooU IOSPnQ//VBUgCxUtgCuQX4PwY+Dqr//BLD8DcA8SNMKqCpYPmXyamPS+ZhtRI1c5 NplWcFuaER4hqiVHkbKyOzOitDXQb4s4Mn09YyLAIb2/uhxg1f79SYSGSi7H5Fay LElP7l84ars0GxlyUNmiwyzA4ySFyuWekT35o2A3eX5gawpf9mPpD21uOqAOKcad V2Z7Rz0mFcz3e400DNEx2DNehXSWZQT2O+05zIWFfpBZ7UB42GJaC+Id1RqtIX2m w5a2DtvWGKUcgWkA5KHqSQn0Ft21MePqL4QsS/s3z0jffPJUkoQX9pqnccFqr9LL 0aWKOSJFZoYtnbUGkRaPY5Kdob7Wgk5px4FUUBHORb39I98w0zP5h1hFY8jgMJxn J4+8Ys4C7Kv3Z+vq6sEo07WnbaIhj4LNO9GRwjaO2NP/UPUqrGIuhB1elBoVL8uX YvoVF6oRaB4ccaH7gR/4R6liF9flsH16OYJTbHp632Ali1nVZDP1vAvNviI5V12G WhrPVi50Utxn9KrV6ez6JJY2ysts7tip/TVAxQN0hDIS22IOxJcuiYoCxaXOEjPJ 8hd6jkF0NApwnlSkPmoqo+ohQ42Az2PtDvEsENw+U7XHur99Ed1ywxRG/K/Pm6gX QjUhoAfr9hXObwjoHKNID3VZnZpEjEsVr7CBFvj6S6FyTx3Ag5k= =wxop -----END PGP SIGNATURE----- Merge tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Allow slightly larger IPVS connection table size from Kconfig for 64-bit arch, from Abhijeet Rastogi. 2) Since IPVS connection table might be larger than 2^20 after previous patch, allow to limit it depending on the available memory. Moreover, use kvmalloc. From Julian Anastasov. 3) Do not rebuild VLAN header in nft_payload when matching source and destination MAC address. 4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal. 5) Allow to update set size, also from Florian. 6) Improve NAT tuple selection when connection is closing, from Florian Westphal. 7) Support for resetting set element stateful expression, from Phil Sutter. 8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables, from Florian Westphal. * tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: limit allowed range via nla_policy netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET netfilter: snat: evict closing tcp entries on reply tuple collision netfilter: nf_tables: permit update of set size netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test netfilter: nft_payload: rebuild vlan header when needed ipvs: dynamically limit the connection hash table ipvs: increase ip_vs_conn_tab_bits range for 64BIT ==================== Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
a0433f8cae |
for-6.5/block-2023-06-23
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
||
|
Linus Torvalds
|
0aa69d53ac |
for-6.5/io_uring-2023-06-23
-----BEGIN PGP SIGNATURE-----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=5Me8
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Nothing major in this release, just a bunch of cleanups and some
optimizations around networking mostly.
- clean up file request flags handling (Christoph)
- clean up request freeing and CQ locking (Pavel)
- support for using pre-registering the io_uring fd at setup time
(Josh)
- Add support for user allocated ring memory, rather than having the
kernel allocate it. Mostly for packing rings into a huge page (me)
- avoid an unnecessary double retry on receive (me)
- maintain ordering for task_work, which also improves performance
(me)
- misc cleanups/fixes (Pavel, me)"
* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
io_uring: merge conditional unlock flush helpers
io_uring: make io_cq_unlock_post static
io_uring: inline __io_cq_unlock
io_uring: fix acquire/release annotations
io_uring: kill io_cq_unlock()
io_uring: remove IOU_F_TWQ_FORCE_NORMAL
io_uring: don't batch task put on reqs free
io_uring: move io_clean_op()
io_uring: inline io_dismantle_req()
io_uring: remove io_free_req_tw
io_uring: open code io_put_req_find_next
io_uring: add helpers to decode the fixed file file_ptr
io_uring: use io_file_from_index in io_msg_grab_file
io_uring: use io_file_from_index in __io_sync_cancel
io_uring: return REQ_F_ flags from io_file_get_flags
io_uring: remove io_req_ffs_set
io_uring: remove a confusing comment above io_file_get_flags
io_uring: remove the mode variable in io_file_get_flags
io_uring: remove __io_file_supports_nowait
io_uring: wait interruptibly for request completions on exit
...
|