Add missing settings for SQC bits. And correct some confusing logics
around active wgp bitmap calculation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When unloading driver, if VCN is powered on, sending message
DisableAllSmuFeatures to SMU will cause SMU hang. We need to
power down VCN and JPEG before clean up SMU.
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes, DP receiver chip power-controlled externally by an
Embedded Controller could be treated and used as eDP,
if it drives mobile display. In this case,
we shouldn't be doing power-sequencing, hence we can skip
waiting for T7-ready and T9-ready."
[How]
Added a feature mask to enable eDP no power sequencing feature.
To enable this, set 0x10 flag in amdgpu.dcfeaturemask on
Linux command line.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
Instead of using static bandwidth setup, manage bandwidth dynamically,
depending on the amount of allocated planes, their format and
resolution.
Co-developed-with: James Willcox <jwillcox@squareup.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210525131316.3117809-8-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior downstream kernels had "fudge factors" in devicetree which would
be applied to things like interconnect bandwidth calculations. Bring
some of those values back here.
Signed-off-by: James Willcox <jwillcox@squareup.com>
[DB: changed _ff to _inefficiency, fixed patch description]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-7-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Hook alpha and pixel blend mode support to be exported as proper DRM
plane properties. This allows using this functionality from the
userspace.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use generic helpers code to manage drm_plane_state part of mdp5_plane
state instead of manually coding all the details.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move the call to dsi_mgr_phy_enable after checking whether the DSI
interface is slave, so that PHY enablement happens together with the
host enablement.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Handling of the interrupt callback lists is done in dpu_core_irq.c,
under the "cb_lock" spinlock. When these operations results in the need
for enableing or disabling the IRQ in the hardware the code jumps to
dpu_hw_interrupts.c, which protects its operations with "irq_lock"
spinlock.
When an interrupt fires, dpu_hw_intr_dispatch_irq() inspects the
hardware state while holding the "irq_lock" spinlock and jumps to
dpu_core_irq_callback_handler() to invoke the registered handlers, which
traverses the callback list under the "cb_lock" spinlock.
As such, in the event that these happens concurrently we'll end up with
a deadlock.
Prior to '1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")'
the enable/disable of the hardware interrupt was done outside the
"cb_lock" region, optimitically by using an atomic enable-counter for
each interrupt and an warning print if someone changed the list between
the atomic_read and the time the operation concluded.
Rather than re-introducing the large array of atomics, this change
embraces the fact that dpu_core_irq and dpu_hw_interrupts are deeply
entangled and make them share the single "irq_lock".
Following this step it's suggested that we squash the two parts into a
single irq handling thing.
Fixes: 1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210611170003.3539059-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Wire up support to stall the SMMU on iova fault, and collect a devcore-
dump snapshot for easier debugging of faults.
Currently this is a6xx-only, but mostly only because so far it is the
only one using adreno-smmu-priv.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the new adreno-smmu-priv fault info function to get more SMMU
debug registers and print the current TTBR0 to debug per-instance
pagetables and figure out which GPU block generated the request.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
While keeping the previous default value for hangcheck period,
we allow now the possibility of configuring its value via
debugfs.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210607104441.184700-1-siglesias@igalia.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add adreno_is_{a660,a650_family} helpers and convert update existing
adreno_is_a650 usage based on downstream driver's logic (changing into
adreno_is_a650_family or adding adreno_is_a660).
And add the remaining changes required for A660, again based on
the downstream driver: missing GMU allocations, additional register init,
dummy hfi BW table, cp protect list, entry in gpulist table, hwcg table,
updated a6xx_ucode_check_version check.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM8250 AOP firmware already sets up PDC registers for us, and it only needs
to be enabled. This path will be used for other newer GPUs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
These aren't used by anything anymore.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210608172808.11803-2-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5
Small bit of .c churn in the phy code to adapt to split up of phy
related registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
The code does not really use dpu_hw_blk fields, so drop them, making
dpu_hw_blk empty structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-5-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use struct dpu_hw_merge_3d pointer in struct dpu_hw_pingpong rather
than using struct dpu_hw_blk. This is the only user of dpu_hw_blk.id,
which will be cleaned in the next patch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-4-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The dpu_hw_blk_destroy() function is empty, so we can drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-3-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove all unused dpu_hw_blk features and functions:
- dpu_hw_blk_get()/_put() and respective refcounting,
- global list of all dpu_hw_blk instances,
- dpu_hw_blk_ops and empty implementation inside each hw_blk subdriver.
This leaves dpu_hw_blk as a placeholder with just type and index.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-2-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to ease debugging of DSI host registration issues, print return
code of dsi_mgr_setup_components().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_link.c:374: warning: expecting prototype for dp_parse_video_pattern_params(). Prototype was for dp_link_parse_video_pattern_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:573: warning: expecting prototype for dp_parse_phy_test_params(). Prototype was for dp_link_parse_phy_test_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:975: warning: expecting prototype for dp_link_process_downstream_port_status_change(). Prototype was for dp_link_process_ds_port_status_change() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-15-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Function parameter or member 'dp_catalog' not described in 'dp_catalog_aux_reset'
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Excess function parameter 'aux' description in 'dp_catalog_aux_reset'
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-14-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/msm_gem.c:364: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/msm/msm_gem.c:763: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-13-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:373: warning: expecting prototype for _dpu_plane_set_panic_lut(). Prototype was for _dpu_plane_set_danger_lut() instead
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:498: warning: expecting prototype for _dpu_plane_set_vbif_qos(). Prototype was for _dpu_plane_set_qos_remap() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-12-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These messages are useful for bringup/early development but in
production they don't provide much value. We know what sort of GPU we
have and interrupt information can be gathered other ways. This cuts
down on lines in the drm debug logs that happen too often, making the
debug logs practically useless.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-3-swboyd@chromium.org
[resolve merge conflicts with dpu irq refactor]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Normal DP suspend operation contains two steps, display off followed
by dp suspend, to complete system wide suspending cycle if display is
up at that time. In this case, DP phy will be powered off at display
off. However there is an exception case that depending on the timing
of dongle plug in during system wide suspending, sometimes display off
procedure may be skipped and dp suspend was called directly. In this
case, dp phy is stay at powered on (phy->power_count = 1) so that at
next resume dp driver crash at main link clock enable due to phy is
not physically powered on. This patch will call dp_ctrl_off_link_stream()
to tear down main link and power off phy at dp_pm_suspend() if main link
had been brought up.
Changes in V2:
-- stashed changes into dp_ctrl.c
-- add is_phy_on to monitor phy state
Changes in V3:
-- delete is_phy_on
-- call dp_ctrl_off_link_stream() from dp_pm_suspend()
Changes in V4:
-- delete changes made at dp_power.c
-- move main link status checking to dp_pm_suspend
Changes in V5:
-- correct commit id at Fixes tag
Fixes: 8dbde399044b ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1622734846-14179-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL checks on the result of container_of() are therefore unnecessary
and misleading. Remove them.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210525112904.1747066-1-linux@roeck-us.net
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[DB: fixed patch subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL check on the result of container_of() is therefore unnecessary
and misleading. Remove it.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
While at it, remove unused but assigned variable hpd in
dp_display_usbpd_attention_cb().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210525032033.453143-1-linux@roeck-us.net
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
clang is a little overzealous with warning about a constant conversion
in an untaken branch of a ternary expression:
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c:975:48: error: implicit conversion from 'unsigned long long' to 'unsigned long' changes value from 5000000000 to 705032704 [-Werror,-Wconstant-conversion]
.max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000UL : ULONG_MAX,
^~~~~~~~~~~~
Rewrite this to use a preprocessor conditional instead to avoid the
warning.
Fixes: 076437c9e3 ("drm/msm/dsi: move min/max PLL rate to phy config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210514213032.575161-1-arnd@kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch fix coccicheck warning:
drivers/gpu/drm/msm/dp/dp_link.c:848:5-8: Unneeded variable: "ret". Return "0" on line 880
Also remove unneeded function return value check.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/20210407130654.3387-1-bernard@vivo.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function ‘dpu_encoder_phys_cmd_wait_for_commit_done’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:688:31: warning: variable ‘cmd_enc’ set but not used [-Wunused-but-set-variable]
Fixes: fe286893ed ("drm/msm/dpu: Remove unused call in wait_for_commit_done")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210407083334.2762-1-thunder.leizhen@huawei.com
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_display.c: In function ‘dp_display_usbpd_attention_cb’:
drivers/gpu/drm/msm/dp/dp_display.c:496:19: warning: variable ‘hpd’ set but not used [-Wunused-but-set-variable]
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210303134319.3160762-4-lee.jones@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use resource-managed OPP API to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314163408.22292-12-digetx@gmail.com
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The error code returned by platform_get_irq() is stored in 'irq', it's
forgotten to be copied to 'ret' before being returned. As a result, the
value 0 of 'ret' is returned incorrectly.
After the above fix is completed, initializing the local variable 'ret'
to 0 is no longer needed, remove it.
In addition, when dpu_mdss_init() is successfully returned, the value of
'ret' is always 0. Therefore, replace "return ret" with "return 0" to make
the code clearer.
Fixes: 070e64dc1b ("drm/msm/dpu: Convert to a chained irq chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210510063805.3262-2-thunder.leizhen@huawei.com
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7f9743abaa ("drm/msm: validate display and event threads")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508022836.1777-1-thunder.leizhen@huawei.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Crtc perf update from frame event work can result in
wrong bandwidth and clock update from dpu if the work
is scheduled after the swap state has happened.
Avoid such issues by moving perf update to complete
commit once the frame is accepted by the hardware.
Fixes: a29c8c0241 ("drm/msm/disp/dpu1: fix display underruns during modeset")
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1622092076-5100-1-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
These prints flood the logs with drm debugging set to enable kms and
driver logging (DRM_UT_KMS and DRM_UT_DRIVER). Let's move these prints
to the atomic bucket (DRM_UT_ATOMIC) as they're related to the atomic
paths.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-7-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the DPU_DEBUG_PLANE() helper to print the plane number instead of
open coding it.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-6-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These are verbose prints that tell us about the framebuffer state. Let's
move them to drm_dbg_state() so that they're only printed if we're
interested in verbose state logging while drm debugging.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-5-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This print is missing a newline, and doesn't really provide any value.
Drop it.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-4-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Put these debug prints in the vblank code into the appropriate vblank
category via drm_dbg_vbl().
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-2-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Merge dpu_core_irq_enable() into dpu_core_irq_register_callback() and
dpu_core_irq_disable() into dpu_core_irq_unregister_callback(), because
they are called in pairs. There is no need to have separate
enable/disable pair, we can enable hardware IRQ when first callback is
registered and when the last callback is unregistered.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-7-dmitry.baryshkov@linaro.org
[fixup tracepoint compile warns]
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is no more need for the dpu_intr_type types, dpu_irq_map table,
individual intr defines and obsolete_irq field. Drop all of them now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-6-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The IRQ table in the dpu_hw_interrupts.h is big, ugly, and hard to
maintain. There are only few interrupts used from that table. Newer
generations use different IRQ locations. Move this data to hw catalog.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-5-dmitry.baryshkov@linaro.org
[fixup tracepoint compile warns/err]
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to make mdss_irqs readable (and error-prone) define names for
interrupt register indices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Always call dpu_hw_intr_clear_intr_status_nolock() from the
dpu_hw_intr_dispatch_irqs(). This simplifies the callback function
(which call clears the interrupts anyway) and enforces clearing the hw
interrupt status.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is little sense in reading interrupt statuses and right after that
going after the array of statuses to dispatch them. Merge both loops
into single function doing read and dispatch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210516202910.2141079-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Let's look at the irq status bits after a transfer and see if we got a
nack or a defer or a timeout, instead of telling drm layers that
everything was fine, while still printing an error message. I wasn't
sure about NACK+DEFER so I lumped all those various errors along with a
nack so that the drm core can figure out that things are just not going
well. The important thing is that we're now returning -ETIMEDOUT when
the message times out and nacks for bad addresses.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/20210507212505.1224111-4-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
We don't need to hold the lock to inspect the message we're going to
transfer, and we don't need to clear the busy flag either. Take the lock
later and bail out earlier if conditions aren't met.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/20210507212505.1224111-3-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
We don't need to stash away 'isr' in the aux structure to pass to two
functions. Let's use a local variable instead. And we can complete the
completion variable in one place instead of two to simplify the code.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/20210507212505.1224111-2-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix following warnings generated when either DP or DSI support is
disabled:
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c:141:3: error: implicit declaration of function 'msm_dp_snapshot'; did you mean 'msm_dsi_snapshot'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_kms.h:127:26: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:867:21: error: initialization of 'void (*)(struct msm_disp_state *, struct msm_kms *)' from incompatible pointer type 'void (*)(struct msm_disp_state *, struct msm_kms *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/dsi/dsi.h:94:30: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration
Reported-by: kernel test robot <lkp@intel.com>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Fixes: 1c3b7ac1a71d ("drm/msm: pass dump state as a function argument")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210527220330.3364716-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
There shouldn't be any reason to ever use uncached over writecombine,
so just use writecombine for MSM_BO_UNCACHED.
Note: userspace never used MSM_BO_UNCACHED anyway
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a new cache mode for creating coherent host-cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Link: https://lore.kernel.org/r/20210423190833.25319-5-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the same logic as the userspace mapping.
This fixes msm_rd with cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-4-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_gem_get_vaddr() currently always maps as writecombine, so use the right
flag instead of relying on broken behavior (things don't actually work if
they are mapped as uncached).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
No one knows what this is for anymore, so just remove it.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-2-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add DSI PHY registers to the msm state snapshots to be able to check
their contents.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of looping throught the resources each time to get the DSI CTRL
area size, get it at the ioremap time.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of allocating snapshotting structure at the driver probe time
and later handling concurrent access, actual state, etc, make
msm_disp_state transient struct. Allocate one when snapshotting happens
and free it after coredump data is read by userspace.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of always getting the disp_state from drm device, pass it as an
argument.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add snapshot points across dpu driver to trigger dumps when critical
errors are hit.
changes in v5:
- change the callers to use the snapshot function directly
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-8-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an API to take a snapshot of DPU controller registers. This API
will be used by the msm_disp_snapshot module to capture the DPU
snapshot.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-6-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an API to take a snapshot of DP controller registers. This API
will be used by the msm_disp_snapshot module to capture the DP
snapshot.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-5-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an API to take a snapshot of DSI controller registers. This API
will be used by the msm_disp_snapshot module to capture the DSI
snapshot.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-4-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the msm_disp_snapshot module which adds supports to dump dpu
registers and capture the drm atomic state which can be used in
case of error conditions.
changes in v5:
- start storing disp_state in msm_kms instead of dpu_kms
- get rid of MSM_DISP_SNAPSHOT_IN_* enum by simplifying the functions
- move snprintf inside the snapshot core by using varargs
- get rid of some stale code comments
- allow snapshot module for non-DPU targets
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-3-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently drm_atomic_print_state() internally allocates and uses a
drm_info printer. Allow it to accept any drm_printer type so that
the API can be leveraged even for taking drm snapshot.
Rename the drm_atomic_print_state() to drm_atomic_print_new_state()
so that it reflects its functionality better.
changes in v5:
- none
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-2-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
irq_hpd interrupt should be handled after dongle plugged in and
before dongle unplugged. Hence irq_hpd interrupt is enabled at
the end of the plugin handle and disabled at the beginning of
unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
handled same as the dongle unplugged which tears down the mainlink
and disables the phy. This patch fixes this problem by only tearing
down the mainlink but keeping phy enabled at irq_hpd with
sink_count = 0 handle so that next irq_hpd with sink_count =1 can be
handled by setup mainlink only. This patch also set dongle into D3
(power off) state at end of handling irq_hpd with sink_count = 0.
Changes in v2:
-- add ctrl->phy_Power_count
Changes in v3:
-- del ctrl->phy_Power_count
-- add phy_power_off to dp_ctrl_off_link_stream()
Changes in v4:
-- return immediately if clock disable failed at dp_ctrl_off_link_stream()
Changes in v5:
-- set dongle to D3 (power off) state at dp_ctrl_off_link_stream()
Changes in v6:
-- add Fixes tag
Fixes: ea9f337ce8 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1621635930-30161-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
* dp_mst: Fix build error
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmDMX1gACgkQaA3BHVML
eiP6Mwf/WshoUNBK1or2di2TRmYrZAcCqhmqfobAn21+XA/uVkrYy7G0gt7P39ND
nDuAgfbQEMiopVNP/M3Fnchk4IT0NbClUvSYbNSdabfxOx8ekDYiOv5T0L8ppu05
yw9k7qFGApi4rnMt+5BDYj0u5R9MT8+fnDN6g20Djn8J4C0IXS+T6pIjEpLMPagf
aO8ZFibpJ/WOlRur0jfwJQfBVOVlCdAtiIduzsNL1AczmkMk5jtGU2pq3M9Gs03R
f2z2tySJgGgybJdMq4M4yL+XN7V6r7q3U+DgiVM0TWk/e/gOvJrMTnMfz4NWmg0O
b3HL6HrO5JYloAGLO7HlGqCrSC+N8w==
=II0P
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* hyperv: advertise the correct formatmodifiers for its primary plane
* dp_mst: VCPI fixes to make it work with StarTech hub
* dp_mst: Fix build error
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YMxgI1oluBpPyfu6@linux-uq9g.fritz.box
The two major changes here are fixed YUV support as well as scaling on
Tegra186 and later. This allows Tegra DRM to be used, for example, as a
video sink for the kmssink gstreamer plugin. The remainder of the
changes are minor fixes.
-----BEGIN PGP SIGNATURE-----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=l2Ew
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.14-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.14-rc1
The two major changes here are fixed YUV support as well as scaling on
Tegra186 and later. This allows Tegra DRM to be used, for example, as a
video sink for the kmssink gstreamer plugin. The remainder of the
changes are minor fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611165157.3569315-1-thierry.reding@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Backmerge tag 'v5.13-rc7' into drm-next
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
No need for a separate flag now that DCN3.1 is not in bring up.
Fold into DRM_AMD_DC_DCN like previous DCN IPs.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function radeon_fence_driver_init always returns success,
the function type maybe coule be changed to void.
This patch first delete the check of the return
value of the function call radeon_fence_driver_init, then,
optimise the function declaration and function to void type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Introduce CMD for EDID CEA block parsing
- Add SCR5 definition for reporting eDP power sequencer status
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Updating the file to fix the missing line
Signed-off-by: Logush Oliver <ollogush@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
recent VBIOS dce_infotable reference clock change caused a I2c regression.
instead of relying on vbios, let's get it from HW directly.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After panel power up, if PSR entry attempted too early,
PSR state may get stuck in transition.
This could happen if the panel is not ready
to respond to the SDP PSR entry message.
In this case dmub f/w is unable to abort PSR entry
since abortion is not permitted after the SDP has been sent.
[How]
Skip 5 pageflips before PSR enable.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some SOC BB paramters may vary per SKU, and it does
not make sense for driver to hardcode these values.
This change was added for dcn30 and dcn301, but not
for dcn302 and dcn303
[how]
Parse the values from VBIOS if available, and use
them if valid
Fixes: 93669c8e48 ("drm/amd/display: get socBB from VBIOS")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
extended_end_address can only be calculated from the extended_address and
extended_size
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The voltage swing has to start from the minimum level when transmit TPS1 over
Main-Link in clock recovery sequence.
The lane settings from current design will inherit the existing VS/PE values
that could be adjusted by Repeater X, and to use the adjusted voltage swing level
in Repeater X-1 or DPRX could violate DP specs.
[How]
To reset VS from lane settings after LTTPRs have been trained to meet the requirement.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some timings with a large VBlank cause the value to overflow the
register related, while also producing other wrong values in DML output.
[how]
Clamp VStartup at the DCN3.1 maximum value
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When video plane is rotate the cursor position is incorrect and not
matching the desktop location.
[How]
When a plane is rotated 90 or 270 degrees, the src_rect.width and height
should be swapped when determining the scaling factor compared to the
dst_rect.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 631003101c.
Reason for revert: side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1ba7b24ba6.
Reason for revert: Side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once drm_framebuffer_init has returned 0, the framebuffer is hooked up
to the reference counting machinery and can no longer be destroyed with
a simple kfree. Therefore, it must be called last.
If drm_framebuffer_init returns 0 but its caller then returns non-0,
there will likely be memory corruption fireworks down the road.
The following lead me to this fix:
[ 12.891228] kernel BUG at lib/list_debug.c:25!
[...]
[ 12.891263] RIP: 0010:__list_add_valid+0x4b/0x70
[...]
[ 12.891324] Call Trace:
[ 12.891330] drm_framebuffer_init+0xb5/0x100 [drm]
[ 12.891378] amdgpu_display_gem_fb_verify_and_init+0x47/0x120 [amdgpu]
[ 12.891592] ? amdgpu_display_user_framebuffer_create+0x10d/0x1f0 [amdgpu]
[ 12.891794] amdgpu_display_user_framebuffer_create+0x126/0x1f0 [amdgpu]
[ 12.891995] drm_internal_framebuffer_create+0x378/0x3f0 [drm]
[ 12.892036] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892075] drm_mode_addfb2+0x34/0xd0 [drm]
[ 12.892115] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892153] drm_ioctl_kernel+0xe2/0x150 [drm]
[ 12.892193] drm_ioctl+0x3da/0x460 [drm]
[ 12.892232] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892274] amdgpu_drm_ioctl+0x43/0x80 [amdgpu]
[ 12.892475] __se_sys_ioctl+0x72/0xc0
[ 12.892483] do_syscall_64+0x33/0x40
[ 12.892491] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c:
55:12-42: duplicated argument to && or ||
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function 'dpp1_full_bypass' is declared twice, so remove the repeated
declaration and unnessary blank line.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warning by replacing a /* fall through */ comment
with the new pseudo-keyword macro fallthrough:
rivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:672:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER:
^
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC reports the following warning with W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c:70:13:
warning:
variable ‘dc’ set but not used [-Wunused-but-set-variable]
70 | struct dc *dc = NULL;
| ^~
This variable is not used in function, this commit remove it to
fix the warning.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC reports the following warning with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3635:17:
warning:
variable ‘status’ set but not used [-Wunused-but-set-variable]
3635 | enum dc_status status = DC_ERROR_UNEXPECTED;
| ^~~~~~
The variable should be used for error check, let's fix it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid any list corruption.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the past, we use MMSCH to determine whether a VCN is enabled or not.
This is not reliable since after a FLR, MMSCH may report junk data.
It is better to use IP discovery data.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pagelist is no long used in amdgpu_gart_bind. Remove it.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use SMU to update the bad pages rather than directly
accessing the EEPROM from the driver.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix non-coherent bit of iolink properties flag
which always is 0.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recently, we added support for an experimental feature named Freesync
video; for more details on that, refer to:
commit 6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
commit d10cd527f5 ("drm/amd/display: Add freesync video modes based on preferred modes")
commit 0eb1af2e82 ("drm/amd/display: Add module parameter for freesync video mode")
Nevertheless, we did not document it in detail in our driver. This
commit introduces a kernel-doc and expands the module parameter
description.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Probably a rebase leftover. This doesn't apply to SR-IOV, and
the non-SR-IOV code below it already handles this properly.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current watermarks end up programming lowers watermarks which
results in screen flickering and underflow for certain modes like 1440p.
[How]
Add 11us to stutter exit & stutter enter plus exit watermark.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because TTM do page counting on userptr BOs which is actually not
needed. To avoid that, lets set TTM_PAGE_FLAG_SG after tt_create and
before tt_populate.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 3769e4c0af ("drm/dp_mst: Avoid to mess up payload table by
ports in stale topology") added to calls to drm_dbg_kms() but it
missed the first parameter, the drm device breaking the build.
Fixes: 3769e4c0af ("drm/dp_mst: Avoid to mess up payload table by ports in stale topology")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616194415.36926-1-jose.souza@intel.com
[Why]
After unplug/hotplug hub from the system, userspace might start to
clear stale payloads gradually. If we call drm_dp_mst_deallocate_vcpi()
to release stale VCPI of those ports which are not relating to current
topology, we have chane to wrongly clear active payload table entry for
current topology.
E.g.
We have allocated VCPI 1 in current payload table and we call
drm_dp_mst_deallocate_vcpi() to clean VCPI 1 in stale topology. In
drm_dp_mst_deallocate_vcpi(), it will call drm_dp_mst_put_payload_id()
tp put VCPI 1 and which means ID 1 is available again. Thereafter, if we
want to allocate a new payload stream, it will find ID 1 is available by
drm_dp_mst_assign_payload_id(). However, ID 1 is being used
[How]
Check target sink is relating to current topology or not before doing
any payload table update.
Searching upward to find the target sink's relevant root branch device.
If the found root branch device is not the same root of current
topology, don't update payload table.
Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Cc tag.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-3-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Why]
When we receive CSN message to notify one port is disconnected, we will
implicitly set its corresponding num_slots to 0. Later on, we will
eventually call drm_dp_update_payload_part1() to arrange down streams.
In drm_dp_update_payload_part1(), we iterate over all proposed_vcpis[]
to do the update. Not specific to a target sink only. For example, if we
light up 2 monitors, Monitor_A and Monitor_B, and then we unplug
Monitor_B. Later on, when we call drm_dp_update_payload_part1() to try
to update payload for Monitor_A, we'll also implicitly clean payload for
Monitor_B at the same time. And finally, when we try to call
drm_dp_update_payload_part1() to clean payload for Monitor_B, we will do
nothing at this time since payload for Monitor_B has been cleaned up
previously.
For StarTech 1to3 DP hub, it seems like if we didn't update DPCD payload
ID table then polling for "ACT Handled"(BIT_1 of DPCD 002C0h) will fail
and this polling will last for 3 seconds.
Therefore, guess the best way is we don't set the proposed_vcpi[]
diretly. Let user of these herlper functions to set the proposed_vcpi
directly.
[How]
1. Revert commit 7617e9621b ("drm/dp_mst: clear time slots for ports
invalid")
2. Tackle the issue in previous commit by skipping those trasient
proposed VCPIs. These stale VCPIs shoulde be explicitly cleared by
user later on.
Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Fixed & Cc tags
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 7617e9621b ("drm/dp_mst: clear time slots for ports invalid")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-2-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c:917:56-57:
pstate_enabled: first occurrence line 935, second occurrence line 937
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling free_mqd inside of destroy_queue_nocpsch_locked can cause a
circular lock. destroy_queue_nocpsch_locked is called under a DQM lock,
which is taken in MMU notifiers, potentially in FS reclaim context.
Taking another lock, which is BO reservation lock from free_mqd, while
causing an FS reclaim inside the DQM lock creates a problematic circular
lock dependency. Therefore move free_mqd out of
destroy_queue_nocpsch_locked and call it after unlocking DQM.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move shadow_list to struct amdgpu_bo_vm as shadow BOs
are part of PT/PD BOs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make provision to pass different ttm BO destroy callback
while creating a amdgpu_bo.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Page table entries are now in embedded in VM BO, so
we do not need struct amdgpu_vm_pt. This patch replaces
struct amdgpu_vm_pt with struct amdgpu_vm_bo_base.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ASICs that need to load sys_drv_aux and sos_aux,
the sys_start_addr is not the start address of psp
ucode array because the sys_drv_aux and sos_aux actaully
located at the end of the ucode array, instead, the
psp ucode arrary start address should be sos_hdr +
sos_hdr_offset.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When some GPUs don't support SVM, don't disabe it for the entire process.
That would be inconsistent with the information the process got from the
topology, which indicates SVM support per GPU.
Instead disable SVM support only for the unsupported GPUs. This is done
by checking any per-device attributes against the bitmap of supported
GPUs. Also use the supported GPU bitmap to initialize access bitmaps for
new SVM address ranges.
Don't handle recoverable page faults from unsupported GPUs. (I don't
think there will be unsupported GPUs that can generate recoverable page
faults. But better safe than sorry.)
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP LL Compliance tests require that the first DPCD transactions after a
hotplug have a timeout interval of 3.2 ms. In cases where LTTPR is
disabled, this means that the first reads from DP_SET_POWER and DP_DPCD_REV must have an extended
timeout.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When changing the DISPCLK_WDIVIDER value from 126 to 127, the change in
clock rate is too great for the FIFOs to handle. This can cause visible
corruption during clock change.
HW has handed down this register sequence to fix the issue.
[HOW]
The sequence, from HW:
a. 127 -> 126
Read DIG_FIFO_CAL_AVERAGE_LEVEL
FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4
Set DCCG_FIFO_ERRDET_OVR_EN = 1
Write 1 to OTGx_DROP_PIXEL for (N-4) times
Set DCCG_FIFO_ERRDET_OVR_EN = 0
Write DENTIST_DISPCLK_RDIVIDER = 126
Because of frequency stepping, sequence a can be executed to change the
divider from 127 to any other divider value.
b. 126 -> 127
Read DIG_FIFO_CAL_AVERAGE_LEVEL
FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4
Set DCCG_FIFO_ERRDET_OVR_EN = 1
Write 1 to OTGx_ADD_PIXEL for (12-N) times
Set DCCG_FIFO_ERRDET_OVR_EN = 0
Write DENTIST_DISPCLK_RDIVIDER = 127
Because of frequency stepping, divider must first be set from any other
divider value to 126 before executing sequence b.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hardware has handed down a new sequence requiring the value of this
register be read from clk_mgr.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 spec says that multiple LTTPRs must not be accessed in a
single AUX transaction.
There may be other places in future where breaking up AUX accesses is
necessary.
[HOW]
Partition the entire DPCD address space into blocks. When an incoming AUX
request spans multiple blocks, break up the request into multiple requests.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP 2.0 SCR specifies that
"A DPTX shall distinguish I2C_DEFER|AUX_ACK from AUX_DEFER. AUX retries
due to
I2C_DEFER are not counted as part of minimum 7 retires (sic) upon
AUX_DEFER’s"
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP 2.0 SCR specifies that TX devices must retry at least 7 times when
receiving an AUX DEFER reply from RX. In addition, the specification
states that the TX shall not retry indefinitely, and gives a suggestive
timeout interval of 50ms.
[HOW]
Keep retrying until both 7 or more retries have been made, and the 50ms
interval has passed.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
7 is the minimum number of retries TX must attempt on an AUX DEFER, not
the maximum.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some DPCD addresses, notably LTTPR Capability registers, are expected to
be read all together in a single DPCD transaction. Rather than force callers to
read registers they don't need, we want to quietly extend the addresses
read, and only return back the values the caller asked for.
This does not affect DPCD writes.
[HOW]
Create an additional layer above AUX to perform 'checked' DPCD
transactions.
Iterate through an array of DPCD address ranges that are marked as being
contiguous. If a requested read falls within one of those ranges, extend
the read to include the entire range.
After DPCD has been queried, copy the requested bytes into the caller's
data buffer, and deallocate all resources used.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP specifies that an LTTPR device is only present if PHY_REPEATER_CNT is
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.
All other values should be considered no LTTPRs present.
[HOW]
Function dp_convert_to_count already does this check. Use it to determine
if PHY_REPEATER_CNT is a valid LTTPR count.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE
programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value
other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.
[HOW]
Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is
requested.
Write Transparent in all other cases.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent
mode after reading LTTPR Capability registers on HPD.
The wording of the SCR is somewhat ambiguous as to whether
Transparent mode must be set explicity, or is implicitly set on LTTPR
capability read. Explicitly setting Transparent mode after LTTPR
capability read should cover all
cases.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 requires that LTTPR caps be read first on hotplug.
For the sake of consistency, this should also be the case on bootup.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want LTTPR capabilities to be readable from more places than just
retrieve_link_cap
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
A new SCR for the DP2.0 spec requires that LTTPR caps be the first thing
read from DPCD upon hotplug.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Improve the maintain/read abilities of dm code.
[How]
Create amdgpu_dm_psr.c/h files.
Move psr function from amdgpu_dm.c
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixed:
- LTTPR improvements
- Backlight improvements
- eDP hotplug detection
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To change the swizzle visual confirm reference pipe from top pipe to
bottom pipe due to bottom pipe information would be more important
for multiple overlay case.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move mst start top mgr in dc_link_detect layer.
Remove unused same_dpcd variable.
Move PEAK_FACTOR_X1000 and LINK_TRAINING_MAX_VERIFY_RETRY
to the proper header for defining dc link internal constant.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Tune backlight ramping profiles for each Vari-Bright level to suit
customer preferences
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some custom platforms use eDP hotplug events to notify panel
capability changes that should be reported
[How]
Add a DC config option that unblocks eDP hotplug events
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Ability to triage DMCUB is improved with availability of certain
dmub registers not currently captured in crash dump diagnostic data.
[HOW]
Add dmub registers to diagnostic data collection.
Thanks Nicholas Kazlauskas for awesome input on this!
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_wave_state acquires the mmap_lock on copy_to_user but so do
mmu_notifiers. mmu_notifiers allows dqm locking so do get_wave_state
outside the dqm_lock to prevent circular locking.
v2: squash in unused variable removal.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a gcc '-Wunused-const-variable' warning:
drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:152:23: warning:
'hyperv_modifiers' defined but not used [-Wunused-const-variable=]
while the variable should be used in drm_simple_display_pipe_init()
as suggested by Thomas, let's fix it.
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615031401.231751-1-pulehui@huawei.com
For each CRTC state, check the size of Gamma and Degamma LUTs so
unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GECC and G6 mem training are mutually exclusive
functionalities. VBIOS/PSP will set the flag
(BOOT_CFG_FEATURE_TWO_STAGE_DRAM_TRAINING) in
runtime database to indicate whether dram memory
training need to be disabled or not.
For Navi1x families, two stage mem training is always
enabled.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP runtime boot_cfg_bitmask carries various psp bl
feature bit mask that can be used by driver. Cache
it in sw_init for further usage.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP will dump various boot up information into a
portion of local frame buffer, called runtime database.
The helper function is used for driver to query those
shared information.
v2: init ret and check !ret to exit loop as soon as
found the entry
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP runtime database is used to share various
boot up information with driver.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dynamic GECC allows user to specify GECC enablement
status, which will take effect in next boot cycle.
v2: initialize boot_cfg to 0xFF
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More boot configs need to be supported via
BOOTCFG_CMD_SET
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp_gfx_uresp_bootcfg is used to inform driver
bootcfg settings maintained by tOS
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CoherentHostAccess flag support has moved from HSA_MEMORYPROPERTY
to HSA_CAPABILITY struct. Proper changes have made also at the thunk
to support this change.
CoherentHostAccess: whether or not device memory can be coherently
accessed by the host CPU.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
PG registers are absent in beige goby, so programming these registers
generate call trace. Fix this by adding a dummy function in dcn303
initialization function which prevents writing to non existant registers.
Fixes: cd6d421e3d ("drm/amd/display: Initial DC support for Beige Goby")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to read smart shift apu and dgpu power share
on yellow_carp
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to read smart shift apu and dgpu power share
on renoir.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to fix a failure for SDMA updating PTEs.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use adev_to_drm() to get to the drm_device pointer.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
psp ring wptr is not initialized properly in ring_create,
which would lead to psp failure after several gpu reset.
[How]
Set ring_wptr to zero in psp_ring_create.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On aldebaran, only primary die fetches valid power data. Show
power/energy values as 0 on secondary die. Also, power limit should not
be set through secondary die.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As OOB(out-of-band) interface may be used to update the power limits.
Thus to make sure the power limits reporting of our driver always
reflects the correct values, the internal cache must be aligned
carefully.
V2: add support for out-of-band of other ASICs
align cached current power limit with OOB imposed
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original code returns IP version of instantce_0 for every IP. This implementation may be correct for most of IPs.
However, for certain IP block (VCN for example), it may have 2 instances and
both of them have the same hw_id, BUT they have different revision number (0 and 1).
In this case, the original amdgpu_discovery_get_ip_version cannot correct reflects
the result and returns false information
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For BACO scenario, PMFW will handle the dpm features disablement
and interaction with RLC properly. Driver involvement is unnecessary
and error prone.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some ASICs, the real dpm feature disablement job is handled by
PMFW during baco reset and custom pptable loading. Cached dpm feature
status need to be updated to pair that.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To correctly kick into BACO state, the audio dev's D-state
transition(D0->D3) needs to be PMFW-aware. So, if the audio
dev entered D3 state prior to our driver, we need to bring
it back to D0 state and make sure there will be a D-state
transition on runpm suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Via the fSMC_MSG_ArmD3 message, PMFW can properly act on the
Dstate change. Driver involvement for determining the timing for
BACO enter/exit is not needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the fix by adding PPSMC_MSG_PrepareMp1ForUnload is proved to
be incomplete. Another fix(see link below) has been sent out.
Link: https://lore.kernel.org/linux-pci/20210602021255.939090-1-evan.quan@amd.com/
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The application should be programming the application ID, not
the kernel, as there can be several options to choose from,
and setting the application ID multiple times can cause issues.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.
Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
-----BEGIN PGP SIGNATURE-----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=tY/d
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611025939.393282-1-inki.dae@samsung.com
UAPI Changes:
- Disable mmap ioctl for gen12+ (excl. TGL-LP)
- Start enabling HuC loading by default for upcoming Gen12+
platforms (excludes TGL and RKL)
Core Changes:
- Backmerge of drm-next
Driver Changes:
- Revert "i915: use io_mapping_map_user" (Eero, Matt A)
- Initialize the TTM device and memory managers (Thomas)
- Major rework to the GuC submission backend to prepare
for enabling on new platforms (Michal Wa., Daniele,
Matt B, Rodrigo)
- Fix i915_sg_page_sizes to record dma segments rather
than physical pages (Thomas)
- Locking rework to prep for TTM conversion (Thomas)
- Replace IS_GEN and friends with GRAPHICS_VER (Lucas)
- Use DEVICE_ATTR_RO macro (Yue)
- Static code checker fixes (Zhihao)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMHeDxg9VLiFtyn3@jlahtine-mobl.ger.corp.intel.com
- remove redundant NULL checks by various people
- fix sparse checker warnings from Marc
- expose more GPU ID values to userspace from Christian
- add HWDB entry for GPU found on i.MX8MP from Sascha
- rework of the linear window calculation to better deal with
systems with large regions of reserved RAM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f27e1ec2c2fea310bfb6fe6c99174a54e9dfba83.camel@pengutronix.de
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
to deal with usage counter. pm_runtime_get_sync() increases the
usage counter even when it failed, which makes callers to forget
to decrease the usage counter and resulted in reference leak.
pm_runtime_resume_and_get() function decreases the usage counter
when it failed internally so it can avoid the reference leak.
Changelog v1:
- Fix an build error reported by kernel test robot of Intel.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reported-by: kernel test robot <lkp@intel.com>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle to avoid continuing to increase the refcount
when pm_runtime_get_sync fails.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
amd-drm-fixes-5.13-2021-06-09:
amdgpu:
- Use kvzmalloc in amdgu_bo_create
- Use drm_dbg_kms for reporting failure to get a GEM FB
- Fix some register offsets for Sienna Cichlid
- Fix fall-through warning
radeon:
- memcpy_to/from_io fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610035631.3943-1-alexander.deucher@amd.com
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMJI5gAKCRDj7w1vZxhR
xcsYAP4wuNYRR+xk96UWrR/pdgxjwUVas6LW3DMlS+VL5sKhyAD+P0Jhapz/O2jy
xv5rdKBy91roau+8ZIln6Z1CFsOC3AI=
=/iun
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-06-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix for snu4i that prevents it from probing, two locking fixes for
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c:
3539:12-42: duplicated argument to && or ||
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c:
5677:87-123: duplicated argument to && or ||
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an
element.
Clean up the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/core/dc_resource.c:448:47-48: WARNING:
Use ARRAY_SIZE.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the following includecheck warning:
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c: clk_mgr.h is
included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for aldebaran.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for renoir.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for vangogh.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for sienna cichlid.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for navi1x.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for arcturus.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defines smu_cmn_get_indep_throttler_status which performs ASIC
independent translation given a corresponding lookup table.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new defines for thermal throttle status bits which are ASIC
independent. This bit field will be visible to userspace via
gpu_metrics alongside the previous ASIC dependent bit fields. Seperated
into four types: power throttlers (16 bits), current throttlers (16
bits), temperature (24 bits), other (8 bits).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch set adds support for a new ASIC independant u64 throttler
status field (indep_throttle_status). Piggybacks off the
gpu_metrics_v1_3 bump and similarly bumps gpu_metrics_v2 version (to
v2_2) to add field.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case with xgmi connected to cpu load alternate psp fw
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes handling when page tables are in system memory.
v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A problem was reported on CoachZ devices where the display wouldn't come
up, or it would be distorted. It turns out that the PLL code here wasn't
getting called once dsi_pll_10nm_vco_recalc_rate() started returning the
same exact frequency, down to the Hz, that the bootloader was setting
instead of 0 when the clk was registered with the clk framework.
After commit 001d8dc338 ("drm/msm/dsi: remove temp data from global
pll structure") we use a hardcoded value for the parent clk frequency,
i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS,
instead of getting it from the config structure. This combination of
changes to the recalc function allows us to properly calculate the
frequency of the PLL regardless of whether or not the PLL has been
clk_prepare()d or clk_set_rate()d. That's a good improvement.
Unfortunately, this means that now we won't call down into the PLL clk
driver when we call clk_set_rate() because the frequency calculated in
the framework matches the frequency that is set in hardware. If the rate
is the same as what we want it should be OK to not call the set_rate PLL
op. The real problem is that the prepare op in this driver uses a
private struct member to stash away the vco frequency so that it can
call the set_rate op directly during prepare. Once the set_rate op is
never called because recalc_rate told us the rate is the same, we don't
set this private struct member before the prepare op runs, so we try to
call the set_rate function directly with a frequency of 0. This
effectively kills the PLL and configures it for a rate that won't work.
Calling set_rate from prepare is really quite bad and will confuse any
downstream clks about what the rate actually is of their parent. Fixing
that will be a rather large change though so we leave that to later.
For now, let's stash away the rate we calculate during recalc so that
the prepare op knows what frequency to set, instead of 0. This way
things keep working and the display can enable the PLL properly. In the
future, we should remove that code from the prepare op so that it
doesn't even try to call the set rate function.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Fixes: 001d8dc338 ("drm/msm/dsi: remove temp data from global pll structure")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
This is the 3D GPU found on the i.MX8MP SoC. The feature bits are
taken from the NXP downstream kernel driver 6.4.3.p1.305572.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
This fixes 32-bit arm build due to lack of 64-bit divides.
Fixes: cb1c81467a ("drm/ttm: flip the switch for driver allocated resources v2")
Link: https://patchwork.freedesktop.org/patch/438442/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drop disabling of gfxoff during VCN use. This allows gfxoff
to kick in and potentially save power if the user is not using
gfx for color space conversion or scaling.
VCN1.0 had a bug which prevented it from working properly with
gfxoff, so we disabled it while using VCN. That said, most apps
today use gfx for scaling and color space conversion rather than
overlay planes so it was generally in use anyway. This was fixed
on VCN2+, but since we mostly use gfx for color space conversion
and scaling and rapidly powering up/down gfx can negate the
advantages of gfxoff, we left gfxoff disabled. As more
applications use overlay planes for color space conversion
and scaling, this starts to be a win, so go ahead and leave
gfxoff enabled.
Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and
vcn_v1_0_ring_begin_use() so they are not affected by this
patch.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The meaning of 'default' for the enable_guc module parameter has been
updated to accurately reflect what is supported on current platforms.
So start using the defaults instead of forcing everything off.
Although, note that right now, the default is for everything to be off
anyway. So this is not a change for current platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603164812.19045-2-matthew.brost@intel.com
We currently treat same slice mask as a same DBuf state and skip
updating the Dbuf slices, if we detect that.
This is wrong as if we have a multi to single pipe change or
vice versa, that would be treated as a same Dbuf state and thus
no changes required, so we don't get Mbus updated, causing issues.
Solution: check also mbus_join, in addition to slices mask.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527110106.21434-1-stanislav.lisovskiy@intel.com
CDCLK crawl feature allows to change CDCLK frequency
without disabling the actual PLL and doesn't require
a full modeset.
v2: - Added has_cdclk_crawl as a feature flag to
intel_device_info(Matt Roper)
- s/gen13_cdclk_pll_crawl/adlp_cdclk_pll_crawl/
(Matt Roper)
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603065038.7298-1-stanislav.lisovskiy@intel.com
The calclulation of how many bytes we stuff into the
DSI pipeline for video mode panels is off by three
orders of magnitude because we did not account for the
fact that the DRM mode clock is in kilohertz rather
than hertz.
This used to be:
drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal
which would become for example for s6e63m0:
60 x 514 x 831 = 25628040 Hz, but mode->clock is
25628 as it is in kHz.
This affects only the Samsung GT-I8190 "Golden" phone
right now since it is the only MCDE device with a video
mode display.
Curiously some specimen work with this code and wild
settings in the EOL and empty packets at the end of the
display, but I have noticed an eeire flicker until now.
Others were not so lucky and got black screens.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: 920dd1b142 ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608213318.3897858-1-linus.walleij@linaro.org
This change takes care of resetting the dss_ctl registers
in case of dsc_disable, bigjoiner disable and also
uncompressed joiner disable.
v2: Fix formatting
v3: Fix the typo (Mansi)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3537
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend
code referencing it will crash. Change the condition to one that avoids
this problem (note: creation of shadow_bo is behind this same condition)
Fixes: e8b0b994c3 ("drm/msm/a6xx: Clear shadow on suspend")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Value was shifted in the wrong direction, resulting in the field always
being zero, which is incorrect for A650.
Fixes: d0bac4e9cd ("drm/msm/a6xx: set ubwc config for A640 and A650")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update CP_PROTECT register programming based on downstream.
A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned
and also be more clear about what it does.
Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the
GMU counter is not accessible from the cmdstream. Which also means
using the CPU counter for the msm_gpu_submit_flush() tracepoint (as
catapult depends on being able to compare this to the start/end values
captured in cmdstream). This may need to be revisited when IFPC is
enabled.
Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the
userspace performance tooling (fdperf and pps-producer) expect to be
able to configure the CP counters.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca
[switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff
up commit msg]
Signed-off-by: Rob Clark <robdclark@chromium.org>
I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.
As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.
BTW, amdgpu has already done it in:
commit ba0b2275a6 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.
Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC_CP_SCHEDULERS and RLC_SPARE_INT0 have different
offsets for Sienna Cichlid
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_err meant broken user space could spam dmesg.
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause error when alloc memory larger than 128KB in
amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc.
Call Trace:
alloc_pages_current+0x6a/0xe0
kmalloc_order+0x32/0xb0
kmalloc_order_trace+0x1e/0x80
__kmalloc+0x249/0x2d0
amdgpu_bo_create+0x102/0x500 [amdgpu]
? xas_create+0x264/0x3e0
amdgpu_bo_create_vm+0x32/0x60 [amdgpu]
amdgpu_vm_pt_create+0xf5/0x260 [amdgpu]
amdgpu_vm_init+0x1fd/0x4d0 [amdgpu]
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AUX logic is often clocked from cdclk. Disable PSR to make sure
there are no hw initiated AUX transactions in flight while we
change the cdclk frequency.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-2-gwan-gyeong.mun@intel.com
This introduces the following function that can exit and activate a psr
source when intel_psr is already enabled.
- intel_psr_pause(): Pause current PSR. It deactivates current psr state.
- intel_psr_resume(): Resume paused PSR. It activates paused psr state.
v2: Address Jose's review comment.
- Remove unneeded changes around the intel_psr_enable().
- Add intel_psr_post_exit() which processes waiting until PSR is idle
and WA for SelectiveFetch.
v3: Address Jose's review comment.
- Rename intel_psr_post_exit() to intel_psr_wait_exit_locked().
- Move WA_1408330847 to intel_psr_disable_locked()
- If the PSR is paused by an explicit intel_psr_paused() call, make the
intel_psr_flush() not to activate PSR.
v4: Address Jose's review comment.
- In order to avoid the scenario of PSR is not active but there is a
scheduled psr->work, it changes the check routine of intel_psr_pause()
for PSR's enablement from "psr->active" to "psr->enable".
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-1-gwan-gyeong.mun@intel.com
There is not much value in the extra conversion step, the calculations
required for the LTDC IP are different than what is used in the
drm_display_mode_to_videomode(), so just do the right ones in the LTDC
driver right away.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@foss.st.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
This is similar to IH_RB_CNTL programming in
navi10_ih_toggle_ring_interrupts
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support a new visual confirm mode: swizzle to show the specific
color at the screen border according to different surface swizzle mode.
Currently we only support the Linear mode with red color.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- Commit from userspace could cause link stream to disable and hdcp
auth to reset when the HDCP has already been enabled at the moment.
CP should fall back to DESIRED from ENABLED in such cases.
- This change was previously reverted due to a regression caused, which
has now been cleared.
[HOW]
In hdcp display removal, change CP to DESIRED if at the moment CP
is ENABLED before the auth reset and removal of linked list element.
Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is an assert in cases where transition from ODM 2:1
to ODM 1:1 (bypass)
[How]
Remove assert since this case is now valid.
Update diags tests for ODM transitions.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Found a use case (IPKVM) that DP-VGA active dongle does
not return any EDID and the mentioned commit broke it.
[How]
This reverts "Disconnect non-DP with no EDID"
Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
