The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.
This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.
This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.
Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.
Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:
1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()
2) ice_ptp_restore_timestamp_mode() which calls
ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
issues an immediate TSYN_TX interrupt to ensure that timestamps which
may have occurred during the device reset get processed.
Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.
This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.
With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.
Fixes: 77a781155a ("ice: enable receive hardware timestamping")
Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit d938a8cca8 ("ice: Auxbus devices & driver for E822 TS") modified
how Tx timestamps are handled for E822 devices. On these devices, only the
clock owner handles reading the Tx timestamp data from firmware. To do
this, the PFINT_TSYN_MSK register is modified from the default value to one
which enables reacting to a Tx timestamp on all PHY ports.
The driver currently programs PFINT_TSYN_MSK in different places depending
on whether the port is the clock owner or not. For the clock owner, the
PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before
calling ice_ptp_tx_ena_intr to program the PHY ports.
For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during
ice_ptp_init_port.
If a large enough device reset occurs, the PFINT_TSYN_MSK register will be
reset to the default value in which only the PHY associated directly with
the PF will cause the Tx timestamp interrupt to trigger.
The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a
device reset. For the E822 device, this results in the PF no longer
responding to interrupts for other ports. This results in failure to
deliver Tx timestamps to user space applications.
Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify
the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place.
This function will program both registers according to the combination of
user configuration and device requirements.
This ensures that PFINT_TSYN_MSK is always restored when we configure the
Tx timestamp interrupt.
Fixes: d938a8cca8 ("ice: Auxbus devices & driver for E822 TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx
ring variable to see if timestamping is enabled on that ring. This value is
set for all rings whenever userspace configures Tx timestamping.
Ostensibly this was done to avoid wasting cycles checking other fields when
timestamping has not been enabled. However, for Tx timestamps we already
get an individual per-SKB flag indicating whether userspace wants to
request a timestamp on that packet. We do not gain much by also having
a separate flag to check for whether timestamping was enabled.
In fact, the driver currently fails to restore the field after a PF reset.
Because of this, if a PF reset occurs, timestamps will be disabled.
Since this flag doesn't add value in the hotpath, remove it and always
provide a timestamp if the SKB flag has been set.
A following change will fix the reset path to properly restore user
timestamping configuration completely.
This went unnoticed for some time because one of the most common
applications using Tx timestamps, ptp4l, will reconfigure the socket as
part of its fault recovery logic.
Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
ice: one by one port representors creation
Michal Swiatkowski says:
Currently ice supports creating port representors only for VFs. For that
use case they can be created and removed in one step.
This patchset is refactoring current flow to support port representor
creation also for subfunctions and SIOV. In this case port representors
need to be created and removed one by one. Also, they can be added and
removed while other port representors are running.
To achieve that we need to change the switchdev configuration flow.
Three first patches are only cosmetic (renaming, removing not used code).
Next few ones are preparation for new flow. The most important one
is "add VF representor one by one". It fully implements new flow.
New type of port representor (for subfunction) will be introduced in
follow up patchset.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: reserve number of CP queues
ice: adjust switchdev rebuild path
ice: add VF representors one by one
ice: realloc VSI stats arrays
ice: set Tx topology every time new repr is added
ice: allow changing SWITCHDEV_CTRL VSI queues
ice: return pointer to representor
ice: make representor code generic
ice: remove VF pointer reference in eswitch code
ice: track port representors in xarray
ice: use repr instead of vf->repr
ice: track q_id in representor
ice: remove unused control VSI parameter
ice: remove redundant max_vsi_num variable
ice: rename switchdev to eswitch
====================
Link: https://lore.kernel.org/r/20231114181449.1290117-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
igc: Add support for physical + free-running timers
Vinicius Costa Gomes says:
The objective is to allow having functionality that depends on the
physical timer (taprio and ETF offloads, for example) and vclocks
operating together.
The "big" missing piece is the implementation of the .getcyclesx64()
function in igc, as i225/i226 have multiple timers, we use one of
those timers (timer 1) as a free-running (non adjustable) timer.
The complication is that only implementing .getcyclesx64() and nothing
else will break synchronization when using vclocks, as reading the clock
will retrieve the free-running value but timnestamps will come from the
adjustable timer. The solution is to modify "in one go" the timestamping
code to be able to retrieve the timestamp from the correct timer (if a
socket is "phc_bound" to a vclock the timestamp will come from the
free-running timer).
I was debating whether or not to do the adjustments for the internal latencies
for the free-running timestamps, decided to do the adjustments so the path
delay when using vclocks is similar to the one when using the physical clock.
One future improvement is to implement the .getcrosscycles() function.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Add support for PTP .getcyclesx64()
igc: Simplify setting flags in the TX data descriptor
====================
Link: https://lore.kernel.org/r/20231114183640.1303163-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From commit 9eed69a914 ("i40e: Drop FCoE code from core driver files")
the field i40e_mac_info.san_addr is unused (never filled).
The field i40e_mac_info.max_fcoeq is unused from the beginning.
Remove both.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Co-developed-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-16-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i40e_hw.mac.type cannot to be equal to I40E_MAC_VF or
I40E_MAC_X722_VF so remove helper i40e_is_vf(), simplify
i40e_adminq_init_regs() and remove enums for these VF MAC types.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-14-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new helpers to check versions of running FW and provided
AQ API to make the code more readable.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add another helper functions that will be used by subsequent
patch to refactor existing open-coded checks whether the version
of running firmware and AdminQ API is recent enough to provide
certain capabilities.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move i40e_is_aq_api_ver_ge helper function (used to check if AdminQ
API version is recent enough) to header so it can be used from
other .c files.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some i40e_hw.caps bits are set in i40e_set_hw_caps(), some of them
in i40e_init_adminq() and the rest of them in i40e_sw_init().
Consolidate the initialization to single proper place i40e_set_hw_caps().
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fields .caps in i40e_hw and .hw_features in i40e_pf both indicate
capabilities provided by hardware. Move and merge i40e_pf.hw_features
into i40e_hw.caps as this is more appropriate place for them and
adjust their names to I40E_HW_CAP_... convention.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert flags field in i40e_hw from u64 to bitmap and its usage
to use bit access functions and rename the field to 'caps' as
this field describes capabilities that are set once on init and
read many times later.
Changes:
- Convert "hw_ptr->flags & FLAG" to "test_bit(FLAG, ...)"
- Convert "hw_ptr->flags |= FLAG" to "set_bit(FLAG, ...)"
- Convert "hw_ptr->flags &= ~FLAG" to "clear_bit(FLAG, ...)"
- Rename i40e_hw.flags to i40e_hw.caps
- Rename i40e_set_hw_flags() to i40e_set_hw_caps()
- Adjust caps names so they are prefixed by I40E_HW_CAP_ and existing
_CAPABLE suffixes are stripped
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert flags and hw_features fields from i40e_pf from u32 to
bitmaps and their usage to use bit access functions.
Changes:
- Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)"
- Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)"
- Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)"
- Rename flag field to bitno in i40e_priv_flags and adjust ethtool
callbacks to work with flags bitmap
- Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS'
like in ice driver
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enum type names should not be suffixed by '_t'. Either to use
'typedef enum name name_t' to so plain 'name_t var' instead of
'enum name_t var'.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag I40E_FLAG_RX_CSUM_ENABLED and I40E_HW_FLAG_DROP_MODE are
set and never read. Remove them.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the driver not produce an error message on
"ethtool -m ethX" command when a non-SFP module is encountered
hence there is no possibility to read the EEPROM.
Make the message to appear in the debug log rather
than as an error string.
Change the return code to -EOPNOTSUPP and the string to make
it more verbose.
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
CC: Stefan Assmann <sassmann@redhat.com>
CC: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check the value of 'ret' after calling 'i40e_vsi_config_rss'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In Tables 8-12 and 8-22 in the X710/XXV710/XL710 datasheet, the QLEN
description states that the maximum size of the descriptor queue is 8k
minus 32, or 8160.
Signed-off-by: Justin Bronder <jsbronder@cold-front.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for using Timer 1 (i225/i226 have 4 timer registers) as a
free-running clock (the "cycles" clock) in addition to Timer 0 (the
default, "adjustable clock"). The objective is to allow taprio/etf
offloading to coexist with PTP vclocks.
Besides the implementation of .getcyclesx64() for i225/i226, to keep
timestamping working when vclocks are in use, we also need to add
support for TX and RX timestamping using the free running timer, when
the requesting socket is bound to a vclock.
On the RX side, i225/i226 can be configured to store the values of two
timers in the received packet metadata area, so it's a matter of
configuring the right registers and retrieving the right timestamp.
The TX is a bit more involved because the hardware stores a single
timestamp (with the selected timer in the TX descriptor) into one of
the timestamp registers.
Note some changes at how the timestamps are done for RX, the
conversion and adjustment of timestamps are now done closer to the
consumption of the timestamp instead of near the reception.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We can re-use the IGC_SET_FLAG() macro to simplify setting some values
in the TX data descriptor. With the macro it's easier to get the
meaning of the operations.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rebuilding CP VSI each time the PR is created drastically increase the
time of maximum VFs creation. Add function to reserve number of CP
queues to deal with this problem.
Use the same function to decrease number of queues in case of removing
VFs. Assume that caller of ice_eswitch_reserve_cp_queues() will also
call ice_eswitch_attach/detach() correct number of times.
Still one by one PR adding is handy for VF resetting routine.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is no need to use specific functions for rebuilding path. Let's
use current implementation by removing all representors and as the
result remove switchdev environment.
It will be added in devices rebuild path. For example during adding VFs,
port representors for them also will be created.
Rebuild control plane VSI before removing representors with INIT_VSI
flag set to reinit VSI in hardware after reset.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement adding representors one by one. Always set switchdev
environment when first representor is being added and clear environment
when last one is being removed.
Basic switchdev configuration remains the same. Code related to creating
and configuring representor was changed.
Instead of setting whole representors in one function handle only one
representor in setup function. The same with removing representors.
Stop representors when new one is being added or removed. Stop means,
disabling napi, stopping traffic and removing slow path rule. It is
needed because ::q_id will change after remapping, so each representor
will need new rule.
When representor are stopped rebuild control plane VSI with one more or
one less queue. One more if new representor is being added, one less if
representor is being removed.
Bridge port is removed during unregister_netdev() call on PR, so there
is no need to call it from driver side.
After that do remap new queues to correct vector. At the end start all
representors (napi enable, start queues, add slow path rule).
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously only case when queues amount is lower was covered. Implement
realloc for case when queues amount is higher than previous one. Use
krealloc() function and zero new allocated elements.
It has to be done before ice_vsi_def_cfg(), because stats element for
ring is set there.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is needed to track correct Tx topology. Update it every time new
representor is created or remove node in case of removing corresponding
representor.
Still clear all node when removing switchdev mode as part of Tx topology
isn't related only to representors. Also clear ::rate_note value to
prevent skipping this node next time Tx topology is created.
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement mechanism to change number of queues for SWITCHDEV_CTRL VSI
type.
Value from ::req_txq/rxq will be written to ::alloc_txq/rxq after
calling ice_vsi_rebuild().
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In follow up patches it will be easier to obtain created port
representor pointer instead of the id. Without it the pattern from
eswitch side will look like:
- create PR
- get PR based on the id
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Representor code needs to be independent from specific device type, like
in this case VF. Make generic add / remove representor function and
specific add VF / rem VF function. New device types will follow this
scheme.
In bridge offload code there is a need to get representor pointer based
on VSI. Implement helper function to achieve that.
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make eswitch code generic by removing VF pointer reference in functions.
It is needed to support eswitch mode for other type of devices.
Previously queue id used for Rx was based on VF number. Use ::q_id saved
in port representor instead.
After adding or removing port representor ::q_id value can change. It
isn't good idea to iterate over representors list using this value.
Use xa_find starting from the first one instead to get next port
representor to remap.
The number of port representors has to be equal to ::num_rx/tx_q. Warn if
it isn't true.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of assuming that each VF has pointer to port representor save it
in xarray. It will allow adding port representor for other device types.
Drop reference to VF where it is use only to get port representor. Get
it from xarray instead.
The functions will no longer by specific for VF, rename them.
Track id assigned by xarray in port representor structure. The id can't
be used as ::q_id, because it is fixed during port representor lifetime.
::q_id can change after adding / removing other port representors.
Side effect of removing VF pointer is that we are losing VF MAC
information used in unrolling. Store it in port representor as parent
MAC.
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Extract repr from vf->repr as it is often use in the ice_repr_rem().
Remove meaningless clearing of q_vector and netdev pointers as kfree is
called on repr pointer.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously queue index of control plane VSI used by port representor was
always id of VF. If we want to allow adding port representors for
different devices we have to track queue index in the port representor
structure.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It isn't used in ice_eswitch_release_reprs(). Probably leftover. Remove
it.
Commit that has removed usage of ctrl_vsi:
commit c1e5da5dd4 ("ice: improve switchdev's slow-path")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is a leftover from previous implementation. Accidentally it wasn't
removed. Do it now.
Commit that has removed it:
commit c1e5da5dd4 ("ice: improve switchdev's slow-path")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Eswitch is used as a prefix for related functions. Main structure
storing all data related to eswitch should also be named as eswitch
instead of ice_switchdev_info. Rename it.
Also rename switchdev to eswitch where the context is not about eswitch
mode.
::uplink_netdev was changed to netdev for simplicity. There is no other
netdev in function scope so it is obvious.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 3cbdb03430 ("ice: Add support for E830 DDP package segment")
incorrectly removed support for package download for packages without a
signature segment. These packages include the signature buffer inline
in the configurations buffers, and not in a signature segment.
Fix package download by providing download support for both packages
with (ice_download_pkg_with_sig_seg()) and without signature segment
(ice_download_pkg_without_sig_seg()).
Fixes: 3cbdb03430 ("ice: Add support for E830 DDP package segment")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The dpll output pins which are used to feed clock signal of PHY and MAC
circuits cannot be disconnected, those integrated circuits require clock
signal for operation.
By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin
capability, prevent the user from invoking the state set callback on
those pins, setting the state on those pins already returns error, as
firmware doesn't allow the change of their state.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Fixes: 8a3a565ff2 ("ice: add admin commands to access cgu configuration")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Supported priority value for input pins may differ with regard of NIC
firmware version. E810T NICs with 3.20/4.00 FW versions would accept
priority range 0-31, where firmware 4.10+ would support the range 0-9
and extra value of 255.
Remove the in-range check as the driver has no information on supported
values from the running firmware, let firmware decide if given value is
correct and return extack error if the value is not supported.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When dpll device is registered and dpll subsystem performs notify of a
new device, the lock state value provided to dpll subsystem equals 0
which is invalid value for the `enum dpll_lock_status`.
Provide correct value by obtaining it from firmware before registering
the dpll device.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-06 (ice)
This series contains updates to ice driver only.
Dave removes SR-IOV LAG attribute for only the interface being disabled
to allow for proper unwinding of all interfaces.
Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC
due to non-allowed sleeping.
Aniruddha and Marcin fix redirection and drop rules for switchdev by
properly setting and marking egress/ingress type.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix VF-VF direction matching in drop rule in switchdev
ice: Fix VF-VF filter rules in switchdev mode
ice: lag: in RCU, use atomic allocation
ice: Fix SRIOV LAG disable on non-compliant aggregate
====================
Link: https://lore.kernel.org/r/20231107004844.655549-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-06 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera resolves a couple issues with devlink; removing a call to
devlink_port_type_clear() and ensuring devlink port is unregistered
after the net device.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix devlink port unregistering
i40e: Do not call devlink_port_type_clear()
====================
Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a drop rule on a VF, rule direction is not being set, which
results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS
equals 0). Because of this, drop rules added on port representors don't
match any packets.
To fix it, set rule direction in drop action to egress when netdev is a
port representor, otherwise set it to ingress.
Fixes: 0960a27bd4 ("ice: Add direction metadata")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Any packet leaving VSI i.e VF's VSI is considered as
egress traffic by HW, thus failing to match the added
rule.
Mark the direction for redirect rules as below:
1. VF-VF - Egress
2. Uplink-VF - Ingress
3. VF-Uplink - Egress
4. Link_Partner-Uplink - Ingress
5. Link_Partner-VF - Ingress
Fixes: 0960a27bd4 ("ice: Add direction metadata")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sleeping is not allowed in RCU read-side critical sections.
Use atomic allocations under rcu_read_lock.
Fixes: 1e0f9881ef ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Fixes: 41ccedf5ca ("ice: implement lag netdev event handler")
Fixes: 3579aa86fb ("ice: update reset path for SRIOV LAG support")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an attribute of an aggregate interface disqualifies it from supporting
SRIOV, the driver will unwind the SRIOV support. Currently the driver is
clearing the feature bit for all interfaces in the aggregate, but this is
not allowing the other interfaces to unwind successfully on driver unload.
Only clear the feature bit for the interface that is currently unwinding.
Fixes: bf65da2eb2 ("ice: enforce interface eligibility and add messaging for SRIOV LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Do not call devlink_port_type_clear() prior devlink port unregister
and let devlink core to take care about it.
Reproducer:
[root@host ~]# rmmod i40e
[ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel?
[ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel?
Fixes: 9e479d64dc ("i40e: Add initial devlink support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The iavf client interface was added in 2017 by commit ed0e894de7
("i40evf: add client interface"), but there have never been any in-tree
callers.
It's not useful for future development either. The Intel out-of-tree
iavf and irdma drivers instead use an auxiliary bus, which is a better
solution.
Remove the iavf client interface code. Also gone are the client_task
work and the client_lock mutex.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-9-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function iavf_free_interrupt_scheme that does the inverse of
iavf_init_interrupt_scheme. Symmetry is nice. And there will be three
callers already.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-8-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use unregister_netdev, which takes rtnl_lock for us. We don't have to
check the reg_state under rtnl_lock. There's nothing to race with. We
have just cancelled the finish_config work.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-7-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The information whether a netdev has been registered is already present
in the netdev itself. There's no need for a driver flag with the same
meaning.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-6-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every time I create VFs on ice, I receive at least one "Device is still
in reset (-16), retrying" message per VF. It recovers fine, but typical
usecases should not trigger scary-looking messages.
The waiting for reset is too short. It makes no sense to check every 10
microseconds. Typical reset waiting times are at least tens of
milliseconds and can be several seconds. I suspect the polling interval
was meant to be 10 milliseconds all along.
IAVF_RESET_WAIT_COMPLETE_COUNT is defined as 2000, so the total waiting
time could be over 20 seconds. I have seen resets take 5 seconds (with
128 VFs on ice).
The added benefit of not triggering the "Device is still in reset" path
is that we avoid going through the __IAVF_INIT_FAILED state, which would
take a full second before retrying.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-5-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reason for queueing watchdog_task is to have it process the
aq_required flags that are being set here. If comms failed, there's
nothing to do, so return early.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This pattern appears in two places in the iavf source code:
while (!mutex_trylock(...))
usleep_range(...);
That's just mutex_lock with extra steps.
The pattern is a leftover from when iavf used bit flags instead of
mutexes for locking. Commit 5ac49f3c27 ("iavf: use mutexes for locking
of critical sections") replaced test_and_set_bit with !mutex_trylock,
preserving the pattern.
Simplify it to mutex_lock.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bit lock __IAVF_IN_CRITICAL_TASK does not exist anymore since commit
5ac49f3c27 ("iavf: use mutexes for locking of critical sections").
Adjust the comments accordingly.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the previous patches provide support for E830 hardware, add E830
specific IDs to the PCI device ID table, so these devices can now be
probed by the kernel.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove zeroing of the fields, as all the fields are in fact initialized
with zeros automatically
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025214157.1222758-6-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for E830 DDP package segment. For the E830 package,
signature buffers will not be included inline in the configuration
buffers. Instead, the signature buffers will be located in a
signature segment.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025214157.1222758-5-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Get Link Status data length can vary with different versions of
ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return
datalen for the specific ice_aqc_get_link_status_data version.
Add new link partner fields to ice_aqc_get_link_status_data; PHY type,
FEC, and flow control.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025214157.1222758-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the support for 200G phy speeds and the mapping for their
advertisement in link. Add the new PHY type bits for AQ command, as
needed for 200G E830 controllers.
Signed-off-by: Alice Michael <alice.michael@intel.com>
Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025214157.1222758-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
E830 is the 200G NIC family which uses the ice driver.
Add specific E830 registers. Embed macros to use proper register based on
(hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers
only available on one of the macs will need to be explicitly referred to
as E800_NAME instead of just NAME. PTP is not yet supported.
Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Scott Taylor <scott.w.taylor@intel.com>
Signed-off-by: Scott Taylor <scott.w.taylor@intel.com>
Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In iavf_down, we're skipping the scheduling of certain operations if
the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES
request must not be skipped in this case, because iavf_close waits
for the transition to the __IAVF_DOWN state, which happens in
iavf_virtchnl_completion after the queues are released.
Without this fix, "rmmod iavf" takes half a second per interface that's
up and prints the "Device resources not yet released" warning.
Fixes: c8de44b577 ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
Fixes: 8e0764b4d6 ("i40e/i40evf: Add support for writeback on ITR feature for X722")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count
handling is unified and page_pool_alloc_frag() is supported
in 32-bit arch with 64-bit DMA, so remove it.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In idpf_vc_core_init, the mailbox work is queued
on a mailbox workqueue but it is not cancelled on error.
This results in a call trace when idpf_mbx_task tries
to access the freed mailbox queue pointer. Fix it by
cancelling the mailbox work in the error path.
Fixes: 4930fbf419 ("idpf: add core init and interrupt request")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023202655.173369-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HW must be programmed differently for queue-based scheduling mode.
To program the completion queue context correctly, the control plane
must know the scheduling mode not only for the Tx queue, but also for
the completion queue.
Unfortunately, currently the driver sets the scheduling mode only for
the Tx queues.
Propagate the scheduling mode data for the completion queue as
well when sending the queue configuration messages.
Fixes: 1c325aac10 ("idpf: configure resources for TX queues")
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023202655.173369-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a programming status desc is encountered on the rx_ring,
next_to_process is bumped along with cleaned_count but next_to_clean is
not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in
overwriting whole ring with new buffers.
Update next_to_clean to point to next_to_process on seeing a programming
status desc if not in the middle of handling a multi-frag packet. Also,
bump cleaned_count only for such case as otherwise next_to_clean buffer
may be returned to hardware on reaching clean_threshold.
Fixes: e9031f2da1 ("i40e: introduce next_to_process to i40e_ring")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reported-by: hq.dev+kernel@msdfc.xyz
Reported by: Solomon Peachy <pizza@shaftnet.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678
Tested-by: hq.dev+kernel@msdfc.xyz
Tested by: Indrek Järve <incx@dustbite.net>
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20231019203852.3663665-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.
Fixes: 8c5ad0dae9 ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.
Fixes: 0e71def252 ("igb: add support of RX network flow classification")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The list iterator in a list_for_each_entry() loop can never be NULL.
If the loop exits without hitting a break then the iterator points
to an offset off the list head and dereferencing it is an out of
bounds access.
Before we transitioned to using list_for_each_entry() loops, then
it was possible for "entry" to be NULL and the comments mention
this. I have updated the comments to match the new code.
Fixes: c1fec89045 ("ethernet/intel: Use list_for_each_entry() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we exit a list_for_each_entry() without hitting a break statement,
the list iterator isn't NULL, it just point to an offset off the
list_head. In that situation, it wouldn't be too surprising for
entry->free to be true and we end up corrupting memory.
The way to test for these is to just set a flag.
Fixes: c1fec89045 ("ethernet/intel: Use list_for_each_entry() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ice_find_netlist_node function was introduced in commit 8a3a565ff2
("ice: add admin commands to access cgu configuration"). Variations of this
function were reviewed concurrently on both intel-wired-lan[1][2], and
netdev [3][4]
[1]: https://lore.kernel.org/intel-wired-lan/20230913204943.1051233-7-vadim.fedorenko@linux.dev/
[2]: https://lore.kernel.org/intel-wired-lan/20230817000058.2433236-5-jacob.e.keller@intel.com/
[3]: https://lore.kernel.org/netdev/20230918212814.435688-1-anthony.l.nguyen@intel.com/
[4]: https://lore.kernel.org/netdev/20230913204943.1051233-7-vadim.fedorenko@linux.dev/
The variant I posted had a few changes due to review feedback which were
never incorporated into the DPLL series:
* Replace the references to ancient and long removed ICE_SUCCESS and
ICE_ERR_DOES_NOT_EXIST status codes in the function comment.
* Return -ENOENT instead of -ENOTBLK, as a more common way to indicate that
an entry doesn't exist.
* Avoid the use of memset() and use simple static initialization for the
cmd variable.
* Use FIELD_PREP to assign the node_type_ctx.
* Remove an unnecessary local variable to keep track of rec_node_handle,
just pass the node_handle pointer directly into ice_aq_get_netlist_node.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ice_get_pf_c827_idx function is only called inside of ice_ptp_hw.c, so
there is no reason to export it. Mark it static and remove the declaration
from ice_ptp_hw.h
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Track MSI-X for VFs using bitmap, by setting and clearing bitmap during
allocation and freeing.
Try to linearize irqs usage for VFs, by freeing them and allocating once
again. Do it only for VFs that aren't currently running.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement ops needed to set MSI-X vector count on VF.
sriov_get_vf_total_msix() should return total number of MSI-X that can
be used by the VFs. Return the value set by devlink resources API
(pf->req_msix.vf).
sriov_set_msix_vec_count() will set number of MSI-X on particular VF.
Disable VF register mapping, rebuild VSI with new MSI-X and queues
values and enable new VF register mapping.
For best performance set number of queues equal to number of MSI-X.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a bitamp to track MSI-X usage for VFs. The bitmap has the size of
total MSI-X amount on device, because at init time the amount of MSI-X
used by VFs isn't known.
The bitmap is used in follow up patchset to provide a block of
continuous block of MSI-X indexes for each created VF.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store the amount of MSI-X per VF instead of storing it in pf struct. It
is used to calculate number of q_vectors (and queues) for VF VSI.
This is necessary because with follow up changes the number of MSI-X can
be different between VFs. Use it instead of using pf->vf_msix value in
all cases.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct ice_vf by vfdev.
Calculation of vfdev falls more nicely into ice_create_vf_entries().
Caching of vfdev enables simplification of ice_restore_all_vfs_msi_state().
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inactive LAG port should not receive any packets, as it can cause adding
invalid FDBs (bridge offload). Add a drop rule matching on inactive lport
in LAG.
Reviewed-by: Simon Horman <horms@kernel.org>
Co-developed-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove ::entry and ::entry_sz fields of &ice_flow_entry,
as they were never set.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c87c938f62 ("i40e: Add VF VLAN pruning") added new
PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with
existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag.
Move the affected flag at the end of the flags and fix its value.
Reproducer:
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
[ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)
netlink error: Operation not supported
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
The link-down-on-close flag cannot be modified after setting vf-vlan-pruning
because vf-vlan-pruning shares the same bit with total-port-shutdown flag
that prevents any modification of link-down-on-close flag.
Fixes: c87c938f62 ("i40e: Add VF VLAN pruning")
Cc: Mateusz Palczewski <mateusz.palczewski@intel.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not safe to initialize the waitqueues after queueing the
watchdog_task. It will be using them.
The chance of this causing a real problem is very small, because
there will be some sleeping before any of the waitqueues get used.
I got a crash only after inserting an artificial sleep in iavf_probe.
Queue the watchdog_task as the last step in iavf_probe. Add a comment to
prevent repeating the mistake.
Fixes: fe2647ab0c ("i40evf: prevent VF close returning before state transitions to DOWN")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Align devlink info versions with ice driver so change 'fw.mgmt'
version to be 2-digit version [major.minor], add 'fw.mgmt.build'
that reports mgmt firmware build number and use '"fw.psid.api'
for NVM format version instead of incorrect '"fw.psid'.
Additionally add missing i40e devlink documentation.
Fixes: 5a423552e0 ("i40e: Add handler for devlink .info_get")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231018123558.552453-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'san_addr' and 'mac_fcoeq' members of struct iavf_mac_info are unused.
'type' is write-only. Delete all three.
The function iavf_set_mac_type that sets 'type' also checks if the PCI
vendor ID is Intel. This is unnecessary. Delete the whole function.
If in the future there's a need for the MAC type (or other PCI
ID-dependent data), I would prefer to use .driver_data in iavf_pci_tbl[]
for this purpose.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231018111527.78194-1-mschmidt@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its use with format
strings:
| if (q_vector->rx.ring && q_vector->tx.ring)
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
Furthermore, we do not need NUL-padding as netdev is already
zero-allocated:
| netdev = alloc_etherdev_mq(sizeof(struct igc_adapter),
| IGC_MAX_TX_QUEUES);
...
alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() ->
alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-10-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its usage with
`strlen` and format strings:
| if (strlen(netdev->name) < (IFNAMSIZ - 5)) {
| sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
Moreover, we do not need NUL-padding as netdev is already
zero-allocated:
| netdev = alloc_etherdev(sizeof(struct igbvf_adapter));
...
alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() ->
alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-9-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We see that netdev->name is expected to be NUL-terminated based on its
usage with format strings:
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
| q_vector->rx.ring->queue_index);
Furthermore, NUL-padding is not required as netdev is already
zero-allocated:
| netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
| IGB_MAX_TX_QUEUES);
...
alloc_etherdev_mq() -> alloc_etherdev_mqs() -> alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-8-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
Moreover, `strncat` shouldn't really be used either as per
fortify-string.h:
* Do not use this function. While FORTIFY_SOURCE tries to avoid
* read and write overflows, this is only possible when the sizes
* of @p and @q are known to the compiler. Prefer building the
* string with formatting, via scnprintf() or similar.
Instead, use `scnprintf` with "%s%s" format string. This code is now
more readable and robust.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-7-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
Other implementations of .*get_drvinfo also use strscpy so this patch
brings fm10k_get_drvinfo in line as well:
igb/igb_ethtool.c +851
static void igb_get_drvinfo(struct net_device *netdev,
igbvf/ethtool.c
167:static void igbvf_get_drvinfo(struct net_device *netdev,
i40e/i40e_ethtool.c
1999:static void i40e_get_drvinfo(struct net_device *netdev,
e1000/e1000_ethtool.c
529:static void e1000_get_drvinfo(struct net_device *netdev,
ixgbevf/ethtool.c
211:static void ixgbevf_get_drvinfo(struct net_device *netdev,
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-6-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We can see that netdev->name is expected to be NUL-terminated based on
it's usage with format strings:
| pr_info("%s NIC Link is Down\n",
| netdev->name);
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
This is in line with other uses of strscpy on netdev->name:
$ rg "strscpy\(netdev\->name.*pci.*"
drivers/net/ethernet/intel/e1000e/netdev.c
7455: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
10839: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-5-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
The "...-1" pattern makes it evident that netdev->name is expected to be
NUL-terminated.
Meanwhile, it seems NUL-padding is not required due to alloc_etherdev
zero-allocating the buffer.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
This is in line with other uses of strscpy on netdev->name:
$ rg "strscpy\(netdev\->name.*pci.*"
drivers/net/ethernet/intel/e1000e/netdev.c
7455: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
10839: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get ahead of the game and fix all the -Wformat=2 noted warnings in the
intel drivers directory.
There are one set of i40e and iavf warnings I couldn't figure out how to
fix because the driver is already using vsnprintf without an explicit
"const char *" format string.
Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after
this series but clang-15 is a little worried about the vsnprintf lines.
summary of warnings:
drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix -Wformat-truncated warnings to complete the intel directories' W=1
clean efforts. The W=1 recently got enhanced with a few new flags and
this brought up some new warnings.
Switch to using kasprintf() when possible so we always allocate the
right length strings.
summary of warnings:
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1425:60: warning: ‘%s’ directive output may be truncated writing 4 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1425:17: note: ‘snprintf’ output between 7 and 17 bytes into a destination of size 13
drivers/net/ethernet/intel/ice/ice_ptp.c:43:27: warning: ‘%s’ directive output may be truncated writing up to 479 bytes into a region of size 64 [-Wformat-truncation=]
drivers/net/ethernet/intel/ice/ice_ptp.c:42:17: note: ‘snprintf’ output between 1 and 480 bytes into a destination of size 64
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning: ‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note: directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note: directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note: ‘snprintf’ output between 23 and 43 bytes into a destination of size 32
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
