Some IP blocks only support partial ras feature and don't
have ras counter and/or ras error status register at all.
Driver should not create err_count sysfs node for those
IP blocks.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system
1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.
2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)
The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
- lower latency when switching from replay to live frames
- enable the possibility of more use cases
- easy control of the sink's refresh rate during replay
Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sort the include files that are included in amdgpu_drv.c alphabetically.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below:
ERROR: switch and case should be at the same indent
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Block comments use * on subsequent lines
WARNING: Comparisons should place the constant on the right side of the test
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following to align to linux coding style:
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments should align the * on each line
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following to align to linux coding style:
WARNING: Missing a blank line after declarations
WARNING: sizeof *rd should be sizeof(*rd)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if GFX clock is in DS (Deep Sleep) state, the current gfx freq may less then dpm
level 0, then pp_dpm_sclk node unable show correct freq.
(align output format with other cards)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing OD interface cannot support the growing demand for more
OD features. We are in the transition to a new OD mechanism. So,
disable the SMU13 OD feature support temporarily. And this should be
reverted when the new OD mechanism online.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
correct the pcie width value in pp_dpm_pcie for smu 13.0.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary. Downgrade to debug instead.
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Symclk should be based on link_enc_inst, and symclk_fe_sel should be based
on stream_enc_inst.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Using dig_stream_mapper, program symclk_en and symclk_fe_src_sel when
enabling or disabling the corresponding stream.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for IH 6.1.
v2: Fix copyright date (Alex)
Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU v13.0.4/11, driver does not need to stop RLC for S0i3,
the firmwares will handle that properly.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory. When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.
Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected. This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens. It's a trade-off for now.
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align with new vmhub definition.
v2: use client_id == VMC to decide vmhub(Hawking)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver's CSA buffer is shared by all the ibs. When the high priority ib
is submitted after the preempted ib, CP overrides the ib_completion_status
as completed in the csa buffer. After that the preempted ib is resubmitted,
CP would clear some locals stored for ib resume when reading the completed
status, which causes gpu hang in some cases.
Always set status as preempted for those resubmitted ib instead of reading
everything from the CSA buffer.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2717
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below:
WARNING: sizeof *numa_info should be sizeof(*numa_info)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return -EINVAL;
+ } else {
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES cached process context must be cleared on adding any queue for
the first time.
For proper debug support, the MES will clear it's cached process context
on the first call to SET_SHADER_DEBUGGER.
This allows TTMPs to be pesistently enabled in a safe manner.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_vram_mgr_attr_group;
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_gtt_mgr_attr_group;
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_flash_attr_group;
And other style fixes:
WARNING: Block comments should align the * on each line
WARNING: void function return statements are not generally useful
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changed from printk to dev_* variants so that
we get better debug info when there are multiple GPUs
in the system.
Fixes other style issue:
ERROR: open brace '{' following function definitions go on the next line
WARNING: printk() should include KERN_<LEVEL> facility level
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
WARNING: do not add new typedefs
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ENOSYS should be used for nonexistent syscalls only, replace ENOSYS with
EOPNOTSUPP for reset handlers that are not implemented for respective ASIC.
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+ if (r == -ENOSYS)
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+ if (r == -ENOSYS)
And other following style fixes in amdgpu_device.c:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
WARNING: Block comments should align the * on each line
WARNING: Missing a blank line after declarations
WARNING: braces {} are not necessary for single statement blocks
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The setting of mes_add_queue_pkt is repeated, so remove it.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend checkpoint logic to allow inclusion of VRAM BOs that
do not have a VA attached
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To setup ttmp on as default for gfx v9.4.3 in IP hw init.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: open brace '{' following function definitions go on the next line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: spaces required around that '>=' (ctx:WxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following function definitions go on the next line
ERROR: space required before the open parenthesis '('
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '=' (ctx:VxW)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: space required before the open parenthesis '('
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX v9.4.3, compute queue MQD is populated using the values in HQD
persistent state register. Hence don't clear the values on module
unload, instead restore it to the default reset value so that MQD is
initialized correctly during next module load. In particular, preload
flag needs to be set on compute queue MQD, otherwise it could cause
uninitialized values being used at device reset state resulting in EDC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To acquire the voltage and current info from gpu_metrics interface,
but gpu_metrics_v2_3 doesn't contain them, and to be backward compatible,
add new gpu_metrics_v2_4 structure.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Wenyou Yang <WenYou.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
User mode driver need to check the sdma ucode version to
see whether the sdma engine supports a new type of PM4 packet.
In SRIOV, sdma is loaded by the host. And, there is no way
to check the sdma ucode version of CHIP_NAVI12 and
CHIP_SIENNA_CICHLID of the host in the guest machine.
[how]
Load the sdma ucode for CHIP_NAVI12 and CHIP_SIENNA_CICHLID
in the guest machine.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-By: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For a constant format without additional arguments, use seq_puts()
instead of seq_printf(). Also, it fixes the following warning.
WARNING: Prefer seq_puts to seq_printf
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Block comments should align the * on each line
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expressions under 'else' branch under case 'CHIP_SIENNA_CICHLID' in
function 'is_fru_eeprom_supported' are executed whenever the expression
in 'if' is False. Otherwise, return from case occurs. Therefore, there
is no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return false;
+ } else {
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expressions under 'else' branch in function 'dm_vblank_get_counter' &
'amdgpu_dm_backlight_get_level' are executed whenever the expression in
'if' is False. Otherwise, return from function occurs. Therefore, there is
no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return 0;
+ else {
WARNING: else is not generally useful after a break or return
+ return convert_brightness_to_user(&caps, avg);
+ } else {
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return -ENOMEM, when there is no sufficient dynamically allocated memory
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only disable RAS by default for aqua vanjaram on APU platform.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case that the GET_INST() is used for looping, only loops for the
times of actual num of xcc, otherwise GET_INST() will return the invalid
index, a.k.a -1
And also remove the redundant mask checking in case of GET_INST()
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows tools to distinguish between VRAM and visible VRAM.
Use the opportunity to fix locking before accessing bo.
v2: squash in unused variable fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set dynamic_svm_range_dump macro to avoid iterating over SVM lists
from svm_range_debug_dump when dynamic debug is disabled. Otherwise,
it could drop performance, specially with big number of SVM ranges.
Make sure both svm_range_set_attr and svm_range_debug_dump functions
are dynamically enabled to print svm_range_debug_dump debug traces.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the checkpatch error as open brace '{' following struct should
go on the same line.
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: bb4fa525f3 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix underflow issue on 175hz timing
- Add interface to modify DMUB panel power options
- Remove check for default eDP panel_mode
- Add new sequence for 4-lane HBR3 on vendor specific retimers
- Update DPG test pattern programming
- Correct unit conversion for vstartup
- Exit idle optimizations before attempt to access PHY
- Refactor recout calculation with a more generic formula
- Read down-spread percentage from lut to adjust dprefclk.
- Don't apply FIFO resync W/A if rdivider = 0
- Prevent invalid pipe connections
- Rearrange dmub_cmd defs order
- Add VESA SCR case for default aux backlight
- Guard DCN31 PHYD32CLK logic against chip family
- Correct grammar mistakes
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Screen underflows happen on 175hz timing for 3 plane overlay case.
[How]
Based on dst y prefetch value clamp to equ or oto for bandwidth
calculation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This option can vary depending on the panel and may be required to be
called during sink detection phase before transmitter control.
[How]
Allow modify the bit depending on the eDP panel connected with a new
interface.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Rearranged defs order
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPCD read is skipped first time after driver initialization.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following to align to linux coding style:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
ERROR: space prohibited before that close parenthesis ')'
WARNING: unnecessary whitespace before a quoted newline
WARNING: %LX is non-standard C, use %llX
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some vendor specific retimer setups for downstream 4-lane HBR3
configuration, the sink will show severe corruption (horizontal shifting)
and intermittent blanking.
[How]
Add new retimer programming sequence before clock recovery when 4 lanes
are active.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Last ODM slice could be slightly larger than other slice because it can be
including the residual.
[How]
Update DPG pattern programming sequence to use a different width for
last odm slice.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
vstartup is calculated to be a large number. It works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[How]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current recout calculation has a few assumptions and implementation
for MPO + ODM combine calculation is very specific. The equation has
too many cases without enough comments to document the detail.
[How]
The change remove the following assumptions:
1. When MPO is enabled, we only allow ODM Combine 2:1
2. ODM Combine always has even segment width.
3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from
its top pipe.
The change applies a generic formula with more details in comment to
document this solution so it is eaiser to learn and debug later.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panels show corruption with high refresh rate timings when
ss is enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Prevent ODM pipe connections between pipes that are not part
of the same plane when adding a plane to context
- Re-attach child pipes of ODM slice about to be disconnected
to prevent any lost pipes with invalid tops/bottoms
- We cannot split if head_pipe is not in ODM. Preventing this
avoids creating an invalid context with an invalid pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all rings have scheduler associated. Only update scheduler data for
rings with scheduler. It could result in out of bound access as total
rings are more than those associated with particular IPs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will enable VCN FW workaround using
DRM KEY INJECT WORKAROUND method,
which is helping in fixing the secure playback.
Signed-off-by: sguttula <Suresh.Guttula@amd.com>
Reviewed-by: Leo Liu <leo.liiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
When determining default aux backlight level, read from
DPCD address 0x734 for VESA SCR on OLED.
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: suspect code indent for conditional statements (8, 12)
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are grammer mistakes in comments
[How]
Correct grammar mistakes
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return -ENOMEM, when there is no sufficient dynamically allocated memory
to create MQD backup for ring
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following to align to coding style:
WARNING: do not add new typedefs
+typedef struct FW_ATT_DB_HEADER
WARNING: do not add new typedefs
+typedef struct FW_ATT_RECORD
WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
+ S_IRUSR,
ERROR: "(foo*)" should be "(foo *)"
WARNING: please, no space before tabs
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adhere to linux coding style
Fixes the following:
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current SR-IOV will not set GC to off state, while it is a real
GC hard reset. Whthout GFX off flag, driver may do gfxhub invalidation
before firmware load and gfxhub gart enable. This operation may cause
CP to become busy because GC is not in the right state for invalidation.
[How]
Add a function for SR-IOV to clean up some sw state before recover. Set
adev->gfx.is_poweron to false to prevent gfxhub invalidation before gfx
firmware autoload complete.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: HaiJun Chang <HaiJun.Chang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use colon to separate parameter name from their specific meaning.
silence the warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c:793: warning: Function parameter or member 'adev' not described in 'amdgpu_vm_pte_update_noretry_flags'
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes: b95b539168 ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An instance of for_each_inst() was not changed to match its new
behaviour and is causing a loop.
v2: remove tmp_mask variable
Fixes: b579ea632f ("drm/amdgpu: Modify for_each_inst macro")
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XCP_CTL register is expected to be programmed by firmware. Under certain
conditions FW may not have programmed it correctly. As a workaround,
program it when FW has not programmed the right values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang on RISC-V appears to be unaffected by the bug causing excessive
stack usage in calculate_bandwidth(). clang 16 with -fstack-usage
reports a 304 byte stack frame size with CONFIG_ARCH_RV32I, and 512
bytes with CONFIG_ARCH_RV64I.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Internal subvp state is not referenced in driver code, so it can be removed.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will enable secure decode playback on VCN4_0_2
Signed-off-by: sguttula <Suresh.Guttula@amd.com>
Reviewed-by: Leo Liu <leo.liiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VBIOS part number is read both in amdgpu_atom_parse() as well
as in atom_get_vbios_pn() and stored twice in the `struct atom_context`
structure. Remove the first unnecessary read and move the `pr_info`
line from that read into the second.
v2: squash in unused variable removal
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
~0 as no xcp partition is used in several places, so improve its
definition by a macro for code consistency.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Other PDs/PTs allocation should just use the same xcp_id as that
stored in root PD.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recent code set xcp_id stored from file private data when opening
device to amdgpu bo for accounting memory usage etc, but not all
VMs are attached to this fpriv structure like the vm cases in
amdgpu_mes_self_test, otherwise, KASAN will complain below out
of bound access. And more importantly, VM code should not touch
fpriv structure, so drop fpriv code handling from amdgpu_vm_pt.
[ 77.292314] BUG: KASAN: slab-out-of-bounds in amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.293845] Read of size 4 at addr ffff888102c48a48 by task modprobe/1069
[ 77.294146] Call Trace:
[ 77.294178] <TASK>
[ 77.294208] dump_stack_lvl+0x49/0x63
[ 77.294260] print_report+0x16f/0x4a6
[ 77.294307] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.295979] ? kasan_complete_mode_report_info+0x3c/0x200
[ 77.296057] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.297556] kasan_report+0xb4/0x130
[ 77.297609] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.299202] __asan_load4+0x6f/0x90
[ 77.299272] amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.300796] ? amdgpu_init+0x6e/0x1000 [amdgpu]
[ 77.302222] ? amdgpu_vm_pt_clear+0x750/0x750 [amdgpu]
[ 77.303721] ? preempt_count_sub+0x18/0xc0
[ 77.303786] amdgpu_vm_init+0x39e/0x870 [amdgpu]
[ 77.305186] ? amdgpu_vm_wait_idle+0x90/0x90 [amdgpu]
[ 77.306683] ? kasan_set_track+0x25/0x30
[ 77.306737] ? kasan_save_alloc_info+0x1b/0x30
[ 77.306795] ? __kasan_kmalloc+0x87/0xa0
[ 77.306852] amdgpu_mes_self_test+0x169/0x620 [amdgpu]
v2: without specifying xcp partition for PD/PT bo, the xcp id is -1.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2686
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
file_priv needs to be setup firstly, otherwise, root PD
will always be allocated on partition 0, even if opening
the device from other partitions.
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RLCG interface support for gfx v9.4.3 and multiple XCCs.
Do not enable it yet.
v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs
in amdgpu_mm_wreg_mmio_rlc
v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Update 128b/132b downspread factor to 0.3%
- Add helpers to get DMUB FW boot options
- Initialize necessary uninitialized variables
- Add stream overhead in BW calculations for 128b/132b
- Add link encoding to timing BW calculation parameters
- Prevent vtotal from being set to 0
- Fix race condition when turning off an output alone
- Keep PHY active for DP displays on DCN31
- Fix ASIC check in aux timeout workaround
- ABM pause toggle
- Add missing triggers for full updates
- Disable MPC split by default on special asic
- Add additional refresh rate conditions for SubVP cases
- Fix DP2 link training failure with RCO
- Reenable all root clock gating options
- Cache backlight_millinits in link structure and setting brightness accordingly
- Refine to decide the verified link setting
- Update SW cursor fallback for subvp high refresh
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Full update was missed for the following cases:
- Idle optimization is enabled
- Plane is not in current context
- Also don't clear surface updates at end of
commit_plane_for_stream_fast as they are cleared at
the beginning of each flip (only stream updates need
to be cleared in case there is no stream update in
the next flip)
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allow ABM states to be transferred across display
adapters for smooth display transitions.
[how]
We call DMUB to pause and get ABM states. We
transfer data to other gpu, and deliver data and
ask ABM to un-pause.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Aux write was meant to be ASIC specific, and is
causing compliance failures on newer parts.
[How]
Make workaround specific to single ASIC.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Port of a change that went into DCN314 to keep the PHY enabled
when we have a connected and active DP display.
The PHY can hang if PHY refclk is disabled inadvertently.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.
[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There certain cases where the timing BW is dependent on the type of link
encoding in use. Thus to calculate the correct BW required for a given
timing, the link encoding should be added as a parameter.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current BW calculations do not account for the additional padding added
for uncompressed pixel-to-symbol packing.
This results in X.Y being too low for 128b/132b SST streams in certain
scenarios. If X.Y is too low, end user can observe image corruption.
[How]
Add function to calculate stream overhead to timing BW calculation for
128b/132b SST cases.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit initializes uninitialized variables.
For some compilers uninitialized variable warnings are treated as Error.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Meera Patel <meera.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To query the bits and print them out for debug purposes.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Setup stream encoder before link enable for TMDS
- Use is_dig_enable function instead of dcn10 hardcode
- Re-add aux intercept disable delay generically for 2+ LTTPRs
- Add polling method to handle MST reply packet
- Remove unused function
- Improve the include of header file
- Add missing static
- Hardcode vco_freq for dcn316
- Reduce stack size
- Skip enabling DMCUB when using emulation
- Check TG is non-null before checking if enabled
- Update scaler recout data for visual confirm
- Skip querying caps when DMCUB emulation is in use
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
All of pipes will be used when the MPC split enable on the dcn
which just has 2 pipes. Then MPO enter will trigger the minimal
transition which need programe dcn from 2 pipes MPC split to 2
pipes MPO. This action will cause lag if happen frequently.
[HOW]
Disable the MPC split for the platform which dcn resource is limited
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Updating downspread factor to 0.3% to add additional margin to account
for potential link rate deviations (up to 300ppm as per the DP spec).
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When 2 threads are doing commit_tail parallelly, one thread could
commit new streams to dc state but another thread remove it from dc
right away.
[How]
If we don't have new dm state change from commit_check, then we should
not call dc_commit_streams() in commit_tail. A new function
amdgpu_dm_commit_streams() is introduced to refator dc_commit_stream()
adjacent code and fix this issue.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Want to further constrain these refresh rate conditions for SubVP:
- SubVP + SubVP: either both <= 120Hz or both between 120-165Hz
- SubVP + DRR: SubVP <= 120Hz
- SubVP + VBlank: SubVP <= 120Hz
[How]
Add constraints in subvp_subvp_admissable(),
dcn32_subvp_drr_admissable() and dcn32_subvp_vblank_admissable()
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We return false by default when link training fail at link loss.
It will cause we get a fail verified link caps directly.
[HOW]
Record the highest verified link caps. Use the recorded value as
the verified link caps if it is not successful in the last attempt
to avoid to use the lowest link setting.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When RCO is enabled for symclk32_le we get failures during
DP2 link traing compliance tests.
[How]
Break out symclk32_le RCO into a separate function that is
called for hpo when link is enabled/disabled.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to save the cached backlight level so that display lights up using
appropriate brightness level instead of the default brightness when
waking up from s0i3.
[How]
Adding a backlight level cache in link structure. Also instead on
calling set_default_brightness_aux, check if cached values exists.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Re-enable all RCO options now that all known issues with
RCO have been addressed
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Since SubVP high refresh is now enabled, we must
fallback to SW cursor under if we're in a SubVP
high refresh config
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Workaround to avoid accessing DMCUB state too early if the emulator
is in use - we don't support any of the features the caps are querying
with emulation anyway.
[How]
Guard the query if emulation is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Visual confirm color is not as expected for Autoa Color Management
feature test.
[How]
Calculate scaler recout data when visual confirm enabled to update
the visual confirm bar on the display.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Shouldn't be touching path for HW DMCUB when emulating.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to calculate the VCO frequency. In our internal branch
we've hard-coded this for a while, so it's well-tested. This also allows
us to remove the now unused code for calculating the VCO frequency.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After enable DRM_AMDGPU_WERROR, clang highlight multiple functions that
need to have `static`, and this commit address those issues and also
improve the indents.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The get_engine_type is never used in the code, for this reason, this
commit drops this function.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit improves the include of some header files to make them align
with other includes.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.
[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Issue not display generic, required for multiple 2+ LTTPR link configurations.
[HOW]
Revert monitor patch change and remove delay for single LTTPR case
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This can differ depending on ASIC and we can end up skipping all
transmitter control if we're relying on the wrong bit as a shortcut
for whether link is on/off.
[How]
The ASIC table itself provides the correct DIG check, use that instead
of the dcn10 hardcode.
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDMI spec requires TMDS clock to be not more than 340MHz. Stream encoder ensure
this requirement but driver enable stream encoder later than PHY. So PHY will
output full speed TMDS clock first.
[How]
Enable stream encoder first in TMDS case.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- creates a new file for doorbell management.
- moves doorbell code from amdgpu_device.c to this file.
V2:
- remove doc from function declaration (Christian)
- remove 'device' from function names to make it consistent (Alex)
- add SPDX license identifier (Luben)
V3:
- change license to MIT license(Christian)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It's useful to be able to enable DPIA trace with dcdebugmask
option, especially to debug DPIA issues involved in transition
of system power states.
This patch adds an option to amdgpu.dcdebugmask to be picked up
by amdgpu DM to enable DPIA trace.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow the initramfs generator to automatically include psp_13_0_6_ta
firmware to initramfs.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable RAS feature by default for aqua vanjaram on APU platform.
Changed from V1:
Splite Disable RAS by default on APU platform into a
separated patch.
Changed from V2:
Avoid to modify global variable amdgpu_ras_enable.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable RAS for aqua vanjaram.
Changed from V1:
Split the change in amdgpu_ras_asic_supported into a
separated patch.
Changed from V2:
Avoid to modify global variable amdgpu_ras_enable.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the function 'gmc_v8_0_ or gmc_v7_0_init_microcode()' fails, the
driver will just fail to load, hence return -EINVAL rather having BUG(),
fixes WARNING: Do not crash the kernel unless it is absolutely
unavoidable--use WARN_ON_ONCE() plus recovery code (if feasible) instead
of BUG() or variants
Fixes: 2f77b5931f ("drm/amdgpu: Fix error & warnings in gmc_v8_0.c")
Fixes: 0cfc1d6830 ("drm/amdgpu: Fix errors & warnings in gmc_ v6_0, v7_0.c")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following warnings reported by checkpatch:
WARNING: Block comments use a trailing */ on a separate line
WARNING: Prefer using '"%s...", __func__' to using 'execute_synaptics_rc_command', this function's name, in a string
WARNING: Prefer using '"%s...", __func__' to using 'apply_synaptics_fifo_reset_wa', this function's name, in a string
WARNING: braces {} are not necessary for single statement blocks
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Despite certain GPUs supporting multiple overlay planes already in
AMDGPU, the driver did not expose the zpos property which is required
for userspace to take advantage of multiple overlay planes in any
meaningful way.
The driver was already hooked up to normalized_zpos, but was just
missing the exposure of it.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use current uclk to be consistent with other dGPUs.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use average gfxclock for consistency with other dGPUs.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steam Deck/Gamescope wants to take advantage of more planes which is
possible on VanGogh but was not previously exposed.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN planes are universal and therefore overlay planes can use the same
formats as primary planes, unlike DCE.
Gamescope/Steam Deck would like to take advantage of this functionality
for partial composition which in some cases in our pipeline, can contain
negative values in some instances.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
