To shared more code between swiotlb and xen-swiotlb, offer a
swiotlb_init_remap interface and add a remap callback to
swiotlb_init_late that will allow Xen to remap the buffer without
duplicating much of the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Let the caller chose a zone to allocate from. This will be used
later on by the xen-swiotlb initialization on arm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Power SVM wants to allocate a swiotlb buffer that is not restricted to
low memory for the trusted hypervisor scheme. Consolidate the support
for this into the swiotlb_init interface by adding a new flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
swiotlb_late_init_with_default_size is an overly verbose name that
doesn't even catch what the function is doing, given that the size is
not just a default but the actual requested size.
Rename it to swiotlb_init_late.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Remove the bogus Xen override that was usually larger than the actual
size and just calculate the value on demand. Note that
swiotlb_max_segment still doesn't make sense as an interface and should
eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
If force bouncing is enabled we can't release the buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
-----BEGIN PGP SIGNATURE-----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=C+Es
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e0), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better. 
And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.
So let's reinstate the cleanups from commit aa6f8dcbab ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.
Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit aa6f8dcbab.
It turns out this breaks at least the ath9k wireless driver, and
possibly others.
What the ath9k driver does on packet receive is to set up the DMA
transfer with:
int ath_rx_init(..)
..
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_FROM_DEVICE);
and then the receive logic (through ath_rx_tasklet()) will fetch
incoming packets
static bool ath_edma_get_buffers(..)
..
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
if (ret == -EINPROGRESS) {
/*let device gain the buffer again*/
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
return false;
}
and it's worth noting how that first DMA sync:
dma_sync_single_for_cpu(..DMA_FROM_DEVICE);
is there to make sure the CPU can read the DMA buffer (possibly by
copying it from the bounce buffer area, or by doing some cache flush).
The iommu correctly turns that into a "copy from bounce bufer" so that
the driver can look at the state of the packets.
In the meantime, the device may continue to write to the DMA buffer, but
we at least have a snapshot of the state due to that first DMA sync.
But that _second_ DMA sync:
dma_sync_single_for_device(..DMA_FROM_DEVICE);
is telling the DMA mapping that the CPU wasn't interested in the area
because the packet wasn't there. In the case of a DMA bounce buffer,
that is a no-op.
Note how it's not a sync for the CPU (the "for_device()" part), and it's
not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).
Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab
broke: it made the code bounce the buffer unconditionally, and changed
the DMA_FROM_DEVICE to just unconditionally and illogically be
DMA_TO_DEVICE.
[ Side note: purely within the confines of the swiotlb driver it wasn't
entirely illogical: The reason it did that odd DMA_FROM_DEVICE ->
DMA_TO_DEVICE conversion thing is because inside the swiotlb driver,
it uses just a swiotlb_bounce() helper that doesn't care about the
whole distinction of who the sync is for - only which direction to
bounce.
So it took the "sync for device" to mean that the CPU must have been
the one writing, and thought it meant DMA_TO_DEVICE. ]
Also note how the commentary in that commit was wrong, probably due to
that whole confusion, claiming that the commit makes the swiotlb code
"bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer"
which is nonsensical for two reasons:
- that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was
exactly when it always did - and should do - the bounce.
- since this is a sync for the device (not for the CPU), we're clearly
fundamentally not coping back stale data from the bounce buffers at
all, because we'd be copying *to* the bounce buffers.
So that commit was just very confused. It confused the direction of the
synchronization (to the device, not the cpu) with the direction of the
DMA (from the device).
Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.
The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
must take precedence over DMA_ATTR_SKIP_CPU_SYNC
Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.
Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.
To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89deb7 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Prefer kcalloc() to kzalloc(array_size()) for allocating an array.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
SWIOTLB's includes have become a great big mess. Restore some order by
consolidating the random different blocks, sorting alphabetically, and
purging some clearly unnecessary entries - linux/io.h is now included
unconditionally, so need not be duplicated in the restricted DMA pool
case; similarly, linux/io.h subsumes asm/io.h; and by now it's a
mystery why asm/dma.h was ever here at all.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Debugfs functions are already stubbed out for !CONFIG_DEBUG_FS, so we
can remove most of the #ifdefs, just keeping one to manually optimise
away the initcall when it would do nothing. We can also simplify the
code itself by factoring out the directory creation and realising that
the global io_tlb_default_mem now makes debugfs_dir redundant.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For larger TDX VM, memset() after set_memory_decrypted() in
swiotlb_update_mem_attributes() takes substantial portion of boot time.
Zeroing doesn't serve any functional purpose. Malicious VMM can mess
with decrypted/shared buffer at any point.
Remove the memset().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
HAS_IOMEM option may not be selected on some platforms (e.g, s390) and
this will cause compilation failure due to missing memremap()
implementation.
Fix it by stubbing out swiotlb_mem_remap when CONFIG_HAS_IOMEM is not
set.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In Isolation VM with AMD SEV, bounce buffer needs to be accessed via
extra address space which is above shared_gpa_boundary (E.G 39 bit
address line) reported by Hyper-V CPUID ISOLATION_CONFIG. The access
physical address will be original physical address + shared_gpa_boundary.
The shared_gpa_boundary in the AMD SEV SNP spec is called virtual top of
memory(vTOM). Memory addresses below vTOM are automatically treated as
private while memory above vTOM is treated as shared.
Expose swiotlb_unencrypted_base for platforms to set unencrypted
memory base offset and platform calls swiotlb_update_mem_attributes()
to remap swiotlb mem to unencrypted address space. memremap() can
not be called in the early stage and so put remapping code into
swiotlb_update_mem_attributes(). Store remap address and use it to copy
data from/to swiotlb bounce buffer.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-2-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().
Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().
Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=waUR
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits)
iommu/dma: Fix incorrect error return on iommu deferred attach
iommu/dart: Initialize DART_STREAMS_ENABLE
iommu/dma: Use kvcalloc() instead of kvzalloc()
iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable
iommu/dart: Use kmemdup instead of kzalloc and memcpy
iommu/vt-d: Avoid duplicate removing in __domain_mapping()
iommu/vt-d: Convert the return type of first_pte_in_page to bool
iommu/vt-d: Clean up unused PASID updating functions
iommu/vt-d: Delete dev_has_feat callback
iommu/vt-d: Use second level for GPA->HPA translation
iommu/vt-d: Check FL and SL capability sanity in scalable mode
iommu/vt-d: Remove duplicate identity domain flag
iommu/vt-d: Dump DMAR translation structure when DMA fault occurs
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
iommu/arm-smmu-qcom: Request direct mapping for modem device
iommu: arm-smmu-qcom: Add compatible for QCM2290
dt-bindings: arm-smmu: Add compatible for QCM2290 SoC
iommu/arm-smmu-qcom: Add SM6350 SMMU compatible
dt-bindings: arm-smmu: Add compatible for SM6350 SoC
iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()
...
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
Add an argument to swiotlb_tbl_map_single that specifies the desired
alignment of the allocated buffer. This is used by dma-iommu to ensure
the buffer is aligned to the iova granule size when using swiotlb with
untrusted sub-granule mappings. This addresses an issue where adjacent
slots could be exposed to the untrusted device if IO_TLB_SIZE < iova
granule < PAGE_SIZE.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-7-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although swiotlb_exit() frees the 'slots' metadata array referenced by
'io_tlb_default_mem', it leaves the underlying buffer pages allocated
despite no longer being usable.
Extend swiotlb_exit() to free the buffer pages as well as the slots
array.
Cc: Claire Chang <tientzu@chromium.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
A recent debugging session would have been made a little bit easier if
we had noticed sooner that swiotlb_exit() was being called during boot.
Add a simple diagnostic message to swiotlb_exit() to complement the one
from swiotlb_print_info() during initialisation.
Cc: Claire Chang <tientzu@chromium.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210705190352.GA19461@willie-the-truck
Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Since commit 69031f5008 ("swiotlb: Set dev->dma_io_tlb_mem to the
swiotlb pool used"), 'struct device' may hold a copy of the global
'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A
subsequent call to swiotlb_exit() will therefore leave dangling pointers
behind in these device structures, resulting in KASAN splats such as:
| BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0
| Read of size 8 at addr ffff8881d7830000 by task swapper/0/0
|
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1
| Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020
| Call Trace:
| <IRQ>
| dump_stack+0x9c/0xcf
| print_address_description.constprop.0+0x18/0x130
| kasan_report.cold+0x7f/0x111
| __iommu_dma_unmap_swiotlb+0x64/0xb0
| nvme_pci_complete_rq+0x73/0x130
| blk_complete_reqs+0x6f/0x80
| __do_softirq+0xfc/0x3be
Convert 'io_default_tlb_mem' to a static structure, so that the
per-device pointers remain valid after swiotlb_exit() has been invoked.
All users are updated to reference the static structure directly, using
the 'nslabs' field to determine whether swiotlb has been initialised.
The 'slots' array is still allocated dynamically and referenced via a
pointer rather than a flexible array member.
Cc: Claire Chang <tientzu@chromium.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fixes: 69031f5008 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
This is a follow-up on 5f89468e2f ("swiotlb: manipulate orig_addr
when tlb_addr has offset") which fixed unaligned dma mappings,
making sure the following overflows are caught:
- offset of the start of the slot within the device bigger than
requested address' offset, in other words if the base address
given in swiotlb_tbl_map_single to create the mapping (orig_addr)
was after the requested address for the sync (tlb_offset) in the
same block:
|------------------------------------------| block
<----------------------------> mapped part of the block
^
orig_addr
^
invalid tlb_addr for sync
- if the resulting offset was bigger than the allocation size
this one could happen if the mapping was not until the end. e.g.
|------------------------------------------| block
<---------------------> mapped part of the block
^ ^
orig_addr invalid tlb_addr
Both should never happen so print a warning and bail out without trying
to adjust the sizes/offsets: the first one could try to sync from
orig_addr to whatever is left of the requested size, but the later
really has nothing to sync there...
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Bumyong Lee <bumyong.lee@samsung.com
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Factor out the debugfs bits from rmem_swiotlb_device_init() into a separate
rmem_swiotlb_debugfs_init() to fix the implicit debugfs declarations.
Fixes: 461021875c50 ("swiotlb: Add restricted DMA pool initialization")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add the initialization function to create restricted DMA pools from
matching reserved-memory nodes.
Regardless of swiotlb setting, the restricted DMA pool is preferred if
available.
The restricted DMA pools provide a basic level of protection against the
DMA overwriting buffer contents at unexpected times. However, to protect
against general data leakage and system memory corruption, the system
needs to provide a way to lock down the memory access, e.g., MPU.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add the functions, swiotlb_{alloc,free} and is_swiotlb_for_alloc to
support the memory allocation from restricted DMA pool.
The restricted DMA pool is preferred if available.
Note that since coherent allocation needs remapping, one must set up
another device coherent pool by shared-dma-pool and use
dma_alloc_from_dev_coherent instead for atomic coherent allocation.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add a new function, swiotlb_release_slots, to make the code reusable for
supporting different bounce buffer pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Rename find_slots to swiotlb_find_slots and move the maintenance of
alloc_size to it for better code reusability later.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Propagate the swiotlb_force into io_tlb_default_mem->force_bounce and
use it to determine whether to bounce the data or not. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Includes Will's fix]
Update is_swiotlb_active to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Always have the pointer to the swiotlb pool used in struct device. This
could help simplify the code for other pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Split the debugfs creation to make the code reusable for supporting
different bounce buffer pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add a new function, swiotlb_init_io_tlb_mem, for the io_tlb_mem struct
initialization to make the code reusable.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
in case of driver wants to sync part of ranges with offset,
swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with
offset and ends up with data mismatch.
It was removed from
"swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single",
but said logic has to be added back in.
From Linus's email:
"That commit which the removed the offset calculation entirely, because the old
(unsigned long)tlb_addr & (IO_TLB_SIZE - 1)
was wrong, but instead of removing it, I think it should have just
fixed it to be
(tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
instead. That way the slot offset always matches the slot index calculation."
(Unfortunatly that broke NVMe).
The use-case that drivers are hitting is as follow:
1. Get dma_addr_t from dma_map_single()
dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE);
|<---------------vsize------------->|
+-----------------------------------+
| | original buffer
+-----------------------------------+
vaddr
swiotlb_align_offset
|<----->|<---------------vsize------------->|
+-------+-----------------------------------+
| | | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
2. Do something
3. Sync dma_addr_t through dma_sync_single_for_device(..)
dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE);
Error case.
Copy data to original buffer but it is from base addr (instead of
base addr + offset) in original buffer:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- size ->|
+-----------------------------------+
|##########| | original buffer
+-----------------------------------+
vaddr
The fix is to copy the data to the original buffer and take into
account the offset, like so:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- offset ->|<- size ->|
+-----------------------------------+
| |##########| | original buffer
+-----------------------------------+
vaddr
[One fix which was Linus's that made more sense to as it created a
symmetry would break NVMe. The reason for that is the:
unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
would come up with the proper offset, but it would lose the
alignment (which this patch contains).]
Fixes: 16fc3cef33 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single")
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If the user already specified a swiotlb size on the command line,
swiotlb_adjust_size should not overwrite it.
Fixes: 2cbc2776ef ("swiotlb: remove swiotlb_nr_tbl")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fix the type of index from unsigned int to int since find_slots() might
return -1.
Fixes: 26a7e09478 ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
When SWIOTLB_NO_FORCE is used, there should really be no allocations of
default_nslabs to occur since we are not going to use those slabs. If a
platform was somehow setting swiotlb_no_force and a later call to
swiotlb_init() was to be made we would still be proceeding with
allocating the default SWIOTLB size (64MB), whereas if swiotlb=noforce
was set on the kernel command line we would have only allocated 2KB.
This would be inconsistent and the point of initializing default_nslabs
to 1, was intended to allocate the minimum amount of memory possible, so
simply remove that minimal allocation period.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
All callers just use it to check if swiotlb is active at all, for which
they can just use is_swiotlb_active. In the longer run drivers need
to stop using is_swiotlb_active as well, but let's do the simple step
first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Instead of allocating ->list and ->orig_addr separately just do one
dynamic allocation for the actual io_tlb_mem structure. This simplifies
a lot of the initialization code, and also allows to just check
io_tlb_default_mem to see if swiotlb is in use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Added a new struct, io_tlb_mem, as the IO TLB memory pool descriptor and
moved relevant global variables into that struct.
This will be useful later to allow for restricted DMA pool.
Signed-off-by: Claire Chang <tientzu@chromium.org>
[hch: rebased]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Lift the double initialization protection from xen-swiotlb to the core
code to avoid exposing too many swiotlb internals. Also upgrade the
check to a warning as it should not happen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Split swiotlb_tbl_sync_single into two separate funtions for the to device
and to cpu synchronization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Move the code to find and validate the original buffer address and size
from the callers into swiotlb_bounce. This means a tiny bit of extra
work in the swiotlb_map path, but avoids code duplication and a leads to
a better code structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The size of the buffer being bounced is not checked if it happens
to be larger than the size of the mapped buffer. Because the size
can be controlled by a device, as it's the case with virtio devices,
this can lead to memory corruption.
This patch saves the remaining buffer memory for each slab and uses
that information for validation in the sync/unmap paths before
swiotlb_bounce is called.
Validating this argument is important under the threat models of
AMD SEV-SNP and Intel TDX, where the HV is considered untrusted.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Respect the min_align_mask in struct device_dma_parameters in swiotlb.
There are two parts to it:
1) for the lower bits of the alignment inside the io tlb slot, just
extent the size of the allocation and leave the start of the slot
empty
2) for the high bits ensure we find a slot that matches the high bits
of the alignment to avoid wasting too much memory
Based on an earlier patch from Jianxiong Gao <jxgao@google.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
swiotlb_tbl_map_single currently nevers sets a tlb_addr that is not
aligned to the tlb bucket size. But we're going to add such a case
soon, for which this adjustment would be bogus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Split out a bunch of a self-contained helpers to make the function easier
to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Remove a layer of pointless indentation, replace a hard to follow
ternary expression with a plain if/else.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Factor out a helper to find the number of slots for a given size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Replace the very genericly named OFFSET macro with a little inline
helper that hardcodes the alignment to the only value ever passed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add a new IO_TLB_SIZE define instead open coding it using
IO_TLB_SHIFT all over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
For SEV, all DMA to and from guest has to use shared (un-encrypted) pages.
SEV uses SWIOTLB to make this happen without requiring changes to device
drivers. However, depending on the workload being run, the default 64MB
of it might not be enough and it may run out of buffers to use for DMA,
resulting in I/O errors and/or performance degradation for high
I/O workloads.
Adjust the default size of SWIOTLB for SEV guests using a
percentage of the total memory available to guest for the SWIOTLB buffers.
Adds a new sev_setup_arch() function which is invoked from setup_arch()
and it calls into a new swiotlb generic code function swiotlb_adjust_size()
to do the SWIOTLB buffer adjustment.
v5 fixed build errors and warnings as
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad53 ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to
allocate a buffer for the swiotlb. It does so by calling
memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
If the allocation must fail, no_iotlb_memory is set.
Later during initialization swiotlb-xen comes in
(drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start
is != 0, it thinks the memory is ready to use when actually it is not.
When the swiotlb is actually needed, swiotlb_tbl_map_single gets called
and since no_iotlb_memory is set the kernel panics.
Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been
initialized, it would do the initialization itself, which might still
succeed.
Fix the panic by setting io_tlb_start to 0 on swiotlb initialization
failure, and also by setting no_iotlb_memory to false on swiotlb
initialization success.
Fixes: ac2cbab21f ("x86: Don't panic if can not alloc buffer for swiotlb")
Reported-by: Elliott Mitchell <ehem+xen@m5p.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Sparse is not happy about max_segment declaration:
CHECK kernel/dma/swiotlb.c
kernel/dma/swiotlb.c:96:14: warning: symbol 'max_segment' was not declared. Should it be static?
Mark it static as suggested.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
There is an extension to a %p to print phys_addr_t type of variables.
Use it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Untangle the way how dma_direct_map_page calls into swiotlb to be able
to properly report errors where the swiotlb DMA address overflows the
mask separately from overflows in the !swiotlb case. This means that
siotlb_map now has to do a little more work that duplicates
dma_direct_map_page, but doing so greatly simplifies the calling
convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The valid memory address check in dma_capable only makes sense when mapping
normal memory, not when using dma_map_resource to map a device resource.
Add a new boolean argument to dma_capable to exclude that check for the
dma_map_resource case.
Fixes: b12d66278d ("dma-direct: check for overflows on 32 bit DMA addresses")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
- Initial support for running on a system with an Ultravisor, which is software
that runs below the hypervisor and protects guests against some attacks by
the hypervisor.
- Support for building the kernel to run as a "Secure Virtual Machine", ie. as
a guest capable of running on a system with an Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with medium
sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas macros, both
to make it more readable and also enable some future optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to:
Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=WlW+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
This splits the size parameter to swiotlb_tbl_map_single() and
swiotlb_tbl_unmap_single() into an alloc_size and a mapping_size
parameter, where the latter one is rounded up to the iommu page
size.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
sme_active() is an x86-specific function so it's better not to call it from
generic code.
There's no need to mention which memory encryption feature is active, so
just use a more generic message. Besides, other architectures will have
different names for similar technology.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-3-bauerman@linux.ibm.com
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"One compiler fix, and a bug-fix in swiotlb_nr_tbl() and
swiotlb_max_segment() to check also for no_iotlb_memory"
* 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: fix phys_addr_t overflow warning
swiotlb: Return consistent SWIOTLB segments/nr_tbl
swiotlb: Group identical cleanup in swiotlb_cleanup()
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612144314.GA16803@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On architectures that have a larger dma_addr_t than phys_addr_t,
the swiotlb_tbl_map_single() function truncates its return code
in the failure path, making it impossible to identify the error
later, as we compare to the original value:
kernel/dma/swiotlb.c:551:9: error: implicit conversion from 'dma_addr_t' (aka 'unsigned long long') to 'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
return DMA_MAPPING_ERROR;
Use an explicit typecast here to convert it to the narrower type,
and use the same expression in the error handling later.
Fixes: b907e20508 ("swiotlb: remove SWIOTLB_MAP_ERROR")
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
With a specifically contrived memory layout where there is no physical
memory available to the kernel below the 4GB boundary, we will fail to
perform the initial swiotlb_init() call and set no_iotlb_memory to true.
There are drivers out there that call into swiotlb_nr_tbl() to determine
whether they can use the SWIOTLB. With the right DMA_BIT_MASK() value
for these drivers (say 64-bit), they won't ever need to hit
swiotlb_tbl_map_single() so this can go unoticed and we would be
possibly lying about those drivers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Avoid repeating the zeroing of global swiotlb variables in two locations
and introduce swiotlb_cleanup() to do that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Cleanups in the swiotlb code and extra debugfs knobs to help with the
field diagnostics"
* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb-xen: ensure we have a single callsite for xen_dma_map_page
swiotlb-xen: simplify the DMA sync method implementations
swiotlb-xen: use ->map_page to implement ->map_sg
swiotlb-xen: make instances match their method names
swiotlb: save io_tlb_used to local variable before leaving critical section
swiotlb: dump used and total slots when swiotlb buffer is full
When swiotlb is full, the kernel would print io_tlb_used. However, the
result might be inaccurate at that time because we have left the critical
section protected by spinlock.
Therefore, we backup the io_tlb_used into local variable before leaving
critical section.
Fixes: 83ca259489 ("swiotlb: dump used and total slots when swiotlb buffer is full")
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
So far the kernel only prints the requested size if swiotlb buffer if full.
It is not possible to know whether it is simply an out of buffer, or it is
because swiotlb cannot allocate buffer with the requested size due to
fragmentation.
As 'io_tlb_used' is available since commit 71602fe6d4 ("swiotlb: add
debugfs to track swiotlb buffer usage"), both 'io_tlb_used' and
'io_tlb_nslabs' are printed when swiotlb buffer is full.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.
Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com> [printk]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Reviewed-by: Juergen Gross <jgross@suse.com> [Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add panic() calls if memblock_alloc() returns NULL.
The panic() format duplicates the one used by memblock itself and in
order to avoid explosion with long parameters list replace open coded
allocation size calculations with a local variable.
Link: http://lkml.kernel.org/r/1548057848-15136-19-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several fixes, most notably fix for virtio on swiotlb systems.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcf/Y0AAoJECgfDbjSjVRpzC8H/RG46PnIpTe69jcuaM3zv7es
Tr2GLl65wPV5AZBGMlRjXEoOt6JknWamROhZL7hJ0/17XX4x1mmEQb9mxweE/TDy
yDiNueni+NdFEptzQOoVjZahPXDaGYjuXH+wCvmCscg6N7iSXWqpKG08m+yr3ATF
NBNvB693FLy7B60v4IIHlsYTqoKFeWPYRvE+HIaapTpENodTAjetGpXDIYJhCTRc
6Yh6uNOYlF7XV8gbYzh4U9IcptrLO4Wv1xcEFMbgUoBeHwEMMpO6pLUFgDZttq0v
eT7lxu5Wg73hACOEdS1fb9HREXa4jm3Iu4qgLxEDeze8Y/AqlUdd8CJGBSFC32A=
=1bSe
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several fixes, most notably fix for virtio on swiotlb systems"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: silence an unused-variable warning
virtio: hint if callbacks surprisingly might sleep
virtio-ccw: wire up ->bus_name callback
s390/virtio: handle find on invalid queue gracefully
virtio-ccw: diag 500 may return a negative cookie
virtio_balloon: remove the unnecessary 0-initialization
virtio-balloon: improve update_balloon_size_func
virtio-blk: Consider virtio_max_dma_size() for maximum segment size
virtio: Introduce virtio_max_dma_size()
dma: Introduce dma_max_mapping_size()
swiotlb: Add is_swiotlb_active() function
swiotlb: Introduce swiotlb_max_mapping_size()
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Expands the SWIOTLB to have debugfs support (along with bug-fixes),
and a tiny fix"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
swiotlb: checking whether swiotlb buffer is full with io_tlb_used
swiotlb: add debugfs to track swiotlb buffer usage
swiotlb: fix comment on swiotlb_bounce()
Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of the generic
infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb and
noncoherent dma ops, and to use more generic code for the coherent direct
mapping, as well as removing a lot of dead code."
- Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing
us to support machines with larger amounts of total RAM or distance between
nodes.
- Two series from Christophe, one to optimise TLB miss handlers on 6xx, and
another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit
CPUs.
- Support for KCOV coverage instrumentation which means we can run syzkaller
and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew
Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh,
Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy,
Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun,
Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley,
Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce,
Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas
Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras,
Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab,
Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das,
Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav
Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=Z9bb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of
the generic infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb
and noncoherent dma ops, and to use more generic code for the
coherent direct mapping, as well as removing a lot of dead
code."
- Increase our vmalloc space to 512T with the Hash MMU on modern
CPUs, allowing us to support machines with larger amounts of total
RAM or distance between nodes.
- Two series from Christophe, one to optimise TLB miss handlers on
6xx, and another to optimise the way STRICT_KERNEL_RWX is
implemented on some 32-bit CPUs.
- Support for KCOV coverage instrumentation which means we can run
syzkaller and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
YueHaibing"
* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/32: Clear on-stack exception marker upon exception return
powerpc: Remove export of save_stack_trace_tsk_reliable()
powerpc/mm: fix "section_base" set but not used
powerpc/mm: Fix "sz" set but not used warning
powerpc/mm: Check secondary hash page table
powerpc: remove nargs from __SYSCALL
powerpc/64s: Fix unrelocated interrupt trampoline address test
powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
powerpc/fsl: Fix the flush of branch predictor.
powerpc/powernv: Make opal log only readable by root
powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
powerpc/64s: system reset interrupt preserve HSRRs
powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
selftests/powerpc: Remove duplicate header
powerpc sstep: Add support for modsd, modud instructions
...
This function will be used from dma_direct code to determine
the maximum segment size of a dma mapping.
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function returns the maximum size that can be remapped
by the SWIOTLB implementation. This function will be later
exposed to users through the DMA-API.
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only user left is powerpc, but even there the generic dma-direct
version works just as well, given that we guarantee that the swiotlb
buffer must always be addressable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no need to have the 'struct dentry *d_swiotlb_usage' variable
static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch uses io_tlb_used to help check whether swiotlb buffer is full.
io_tlb_used is no longer used for only debugfs. It is also used to help
optimize swiotlb_tbl_map_single().
Suggested-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The device driver will not be able to do dma operations once swiotlb buffer
is full, either because the driver is using so many IO TLB blocks inflight,
or because there is memory leak issue in device driver. To export the
swiotlb buffer usage via debugfs would help the user estimate the size of
swiotlb buffer to pre-allocate or analyze device driver memory leak issue.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fix the comment as swiotlb_bounce() is used to copy from original dma
location to swiotlb buffer during swiotlb_tbl_map_single(), while to
copy from swiotlb buffer to original dma location during
swiotlb_tbl_unmap_single().
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Otherwise is_swiotlb_buffer will return false positives when
we first initialize a swiotlb buffer, but then free it because
we have an IOMMU available.
Fixes: 55897af630 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Sibren Vasse <sibren@sibrenvasse.nl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sibren Vasse <sibren@sibrenvasse.nl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
While the dma-direct code is (relatively) clean and simple we actually
have to use the swiotlb ops for the mapping on many architectures due
to devices with addressing limits. Instead of keeping two
implementations around this commit allows the dma-direct
implementation to call the swiotlb bounce buffering functions and
thus share the guts of the mapping implementation. This also
simplified the dma-mapping setup on a few architectures where we
don't have to differenciate which implementation to use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Instead of providing a special dma_mark_clean hook just for ia64, switch
ia64 to use the normal arch_sync_dma_for_cpu hooks instead.
This means that we now also set the PG_arch_1 bit for pages in the
swiotlb buffer, which isn't stricly needed as we will never execute code
out of the swiotlb buffer, but otherwise harmless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
We can use DMA_MAPPING_ERROR instead, which already maps to the same
value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
The dma-direct code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
If swiotlb_bounce_page() failed, calling arch_sync_dma_for_device() may
lead to such delights as performing cache maintenance on whatever
address phys_to_virt(SWIOTLB_MAP_ERROR) looks like, which is typically
outside the kernel memory map and goes about as well as expected.
Don't do that.
Fixes: a4a4330db4 ("swiotlb: add support for non-coherent DMA")
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
