proxmox-mirrors/mirror_ubuntu-kernels
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_ubuntu-kernels.git synced 2025-11-17 19:18:38 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,215,311 Commits 2 Branches 91 Tags 3.2 GiB
291e45eeeb
Commit Graph

2037 Commits

Author SHA1 Message Date
Jan Kara
576215cffd fs: Drop wait_unfrozen wait queue 
wait_unfrozen waitqueue is used only in quota code to wait for
filesystem to become unfrozen. In that place we can just use
sb_start_write() - sb_end_write() pair to achieve the same. So just
remove the waitqueue.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230525141710.7595-1-jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
 2023-05-30 15:36:40 +02:00
Linus Torvalds
ac2263b588 Revert "module: error out early on concurrent load of the same module file" 
This reverts commit 9828ed3f69.

Sadly, it does seem to cause failures to load modules. Johan Hovold reports:

 "This change breaks module loading during boot on the Lenovo Thinkpad
  X13s (aarch64).

  Specifically it results in indefinite probe deferral of the display
  and USB (ethernet) which makes it a pain to debug. Typing in the dark
  to acquire some logs reveals that other modules are missing as well"

Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later.  The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.

One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.

Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/lkml/ZHRpH-JXAxA6DnzR@hovoldconsulting.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2023-05-29 06:40:33 -04:00
Linus Torvalds
9828ed3f69 module: error out early on concurrent load of the same module file 
It turns out that udev under certain circumstances will concurrently try
to load the same modules over-and-over excessively.  This isn't a kernel
bug, but it ends up affecting the kernel, to the point that under
certain circumstances we can fail to boot, because the kernel uses a lot
of memory to read all the module data all at once.

Note that it isn't a memory leak, it's just basically a thundering herd
problem happening at bootup with a lot of CPUs, with the worst cases
then being pretty bad.

Admittedly the worst situations are somewhat contrived: lots and lots of
CPUs, not a lot of memory, and KASAN enabled to make it all slower and
as such (unintentionally) exacerbate the problem.

Luis explains: [1]

 "My best assessment of the situation is that each CPU in udev ends up
  triggering a load of duplicate set of modules, not just one, but *a
  lot*. Not sure what heuristics udev uses to load a set of modules per
  CPU."

Petr Pavlu chimes in: [2]

 "My understanding is that udev workers are forked. An initial kmod
  context is created by the main udevd process but no sharing happens
  after the fork. It means that the mentioned memory pool logic doesn't
  really kick in.

  Multiple parallel load requests come from multiple udev workers, for
  instance, each handling an udev event for one CPU device and making
  the exactly same requests as all others are doing at the same time.

  The optimization idea would be to recognize these duplicate requests
  at the udevd/kmod level and converge them"

Note that module loading has tried to mitigate this issue before, see
for example commit 064f4536d1 ("module: avoid allocation if module is
already present and ready"), which has a few ASCII graphs on memory use
due to this same issue.

However, while that noticed that the module was already loaded, and
exited with an error early before spending any more time on setting up
the module, it didn't handle the case of multiple concurrent module
loads all being active - but not complete - at the same time.

Yes, one of them will eventually win the race and finalize its copy, and
the others will then notice that the module already exists and error
out, but while this all happens, we have tons of unnecessary concurrent
work being done.

Again, the real fix is for udev to not do that (maybe it should use
threads instead of fork, and have actual shared data structures and not
cause duplicate work). That real fix is apparently not trivial.

But it turns out that the kernel already has a pretty good model for
dealing with concurrent access to the same file: the i_writecount of the
inode.

In fact, the module loading already indirectly uses 'i_writecount' ,
because 'kernel_file_read()' will in fact do

	ret = deny_write_access(file);
	if (ret)
		return ret;
	...
	allow_write_access(file);

around the read of the file data.  We do not allow concurrent writes to
the file, and return -ETXTBUSY if the file was open for writing at the
same time as the module data is loaded from it.

And the solution to the reader concurrency problem is to simply extend
this "no concurrent writers" logic to simply be "exclusive access".

Note that "exclusive" in this context isn't really some absolute thing:
it's only exclusion from writers and from other "special readers" that
do this writer denial.  So we simply introduce a variation of that
"deny_write_access()" logic that not only denies write access, but also
requires that this is the _only_ such access that denies write access.

Which means that you can't start loading a module that is already being
loaded as a module by somebody else, or you will get the same -ETXTBSY
error that you would get if there were writers around.

[ It also means that you can't try to load a currently executing
  executable as a module, for the same reason: executables do that same
  "deny_write_access()" thing, and that's obviously where the whole
  ETXTBSY logic traditionally came from.

  This is not a problem for kernel modules, since the set of normal
  executable files and kernel module files is entirely disjoint. ]

This new function is called "exclusive_deny_write_access()", and the
implementation is trivial, in that it's just an atomic decrement of
i_writecount if it was 0 before.

To use that new exclusivity check, all we then do is wrap the module
loading with that exclusive_deny_write_access()() / allow_write_access()
pair.  The actual patch is a bit bigger than that, because we want to
surround not just the "load file data" part, but the whole module setup,
to get maximum exclusion.

So this ends up splitting up "finit_module()" into a few helper
functions to make it all very clear and legible.

In Luis' test-case (bringing up 255 vcpu's in a virtual machine [3]),
the "wasted vmalloc" space (ie module data read into a vmalloc'ed area
in order to be loaded as a module, but then discarded because somebody
else loaded the same module instead) dropped from 1.8GiB to 474kB.  Yes,
that's gigabytes to kilobytes.

It doesn't drop completely to zero, because even with this change, you
can still end up having completely serial pointless module loads, where
one udev process has loaded a module fully (and thus the kernel has
released that exclusive lock on the module file), and then another udev
process tries to load the same module again.

So while we cannot fully get rid of the fundamental bug in user space,
we _can_ get rid of the excessive concurrent thundering herd effect.

A couple of final side notes on this all:

 - This tweak only affects the "finit_module()" system call, which gives
   the kernel a file descriptor with the module data.

   You can also just feed the module data as raw data from user space
   with "init_module()" (note the lack of 'f' at the beginning), and
   obviously for that case we do _not_ have any "exclusive read" logic.

   So if you absolutely want to do things wrong in user space, and try
   to load the same module multiple times, and error out only later when
   the kernel ends up saying "you can't load the same module name
   twice", you can still do that.

   And in fact, some distros will do exactly that, because they will
   uncompress the kernel module data in user space before feeding it to
   the kernel (mainly because they haven't started using the new kernel
   side decompression yet).

   So this is not some absolute "you can't do concurrent loads of the
   same module". It's literally just a very simple heuristic that will
   catch it early in case you try to load the exact same module file at
   the same time, and in that case avoid a potentially nasty situation.

 - There is another user of "deny_write_access()": the verity code that
   enables fs-verity on a file (the FS_IOC_ENABLE_VERITY ioctl).

   If you use fs-verity and you care about verifying the kernel modules
   (which does make sense), you should do it *before* loading said
   kernel module. That may sound obvious, but now the implementation
   basically requires it. Because if you try to do it concurrently, the
   kernel may refuse to load the module file that is being set up by the
   fs-verity code.

 - This all will obviously mean that if you insist on loading the same
   module in parallel, only one module load will succeed, and the others
   will return with an error.

   That was true before too, but what is different is that the -ETXTBSY
   error can be returned *before* the success case of another process
   fully loading and instantiating the module.

   Again, that might sound obvious, and it is indeed the whole point of
   the whole change: we are much quicker to notice the whole "you're
   already in the process of loading this module".

   So it's very much intentional, but it does mean that if you just
   spray the kernel with "finit_module()", and expect that the module is
   immediately loaded afterwards without checking the return value, you
   are doing something horribly horribly wrong.

   I'd like to say that that would never happen, but the whole _reason_
   for this commit is that udev is currently doing something horribly
   horribly wrong, so ...

Link: https://lore.kernel.org/all/ZEGopJ8VAYnE7LQ2@bombadil.infradead.org/ [1]
Link: https://lore.kernel.org/all/23bd0ce6-ef78-1cd8-1f21-0e706a00424a@suse.com/ [2]
Link: https://lore.kernel.org/lkml/ZG%2Fa+nrt4%2FAAUi5z@bombadil.infradead.org/ [3]
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2023-05-25 17:07:57 -07:00
David Howells
c6585011bc splice: Remove generic_file_splice_read() 
Remove generic_file_splice_read() as it has been replaced with calls to
filemap_splice_read() and copy_splice_read().

With this, ITER_PIPE is no longer used.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steve French <smfrench@gmail.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-30-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2023-05-24 08:42:17 -06:00
David Howells
69df79a451 splice: Rename direct_splice_read() to copy_splice_read() 
Rename direct_splice_read() to copy_splice_read() to better reflect as to
what it does.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-4-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2023-05-24 08:42:15 -06:00
Hao Ge
f15afbd34d
fs: fix undefined behavior in bit shift for SB_NOUSER 
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. It was spotted by UBSAN.

So let's just fix this by using the BIT() helper for all SB_* flags.

Fixes: e462ec50cb ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Message-Id: <20230424051835.374204-1-gehao@kylinos.cn>
[brauner@kernel.org: use BIT() for all SB_* flags]
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2023-05-17 15:25:18 +02:00
Linus Torvalds
bedf149527 New code for 6.4: 
* Remove an unused symbol.
  * Add tracepoints for the directio code.
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZEKzuQAKCRBKO3ySh0YR
 pothAQD9sBm7//+vYXxQXPlmX09Jvxixnlwyth+PvUI2Al3mrgEA0h1ZSRhxBbxx
 QiIFXCQYckb9GTIcRd67lCp1j/Ie/g0=
 =vGbm
 -----END PGP SIGNATURE-----

Merge tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull iomap updates from Darrick Wong:
 "The only changes for this cycle are the addition of tracepoints to the
  iomap directio code so that Ritesh (who is working on porting ext2 to
  iomap) can observe the io flows more easily.

  Summary:

   - Remove an unused symbol

   - Add tracepoints for the directio code"

* tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Add DIO tracepoints
  iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
  fs.h: Add TRACE_IOCB_STRINGS for use in trace points
 2023-04-29 10:35:48 -07:00
Linus Torvalds
5b9a7bb72f for-6.4/io_uring-2023-04-21 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvawQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpiKTEACvp0jm3Lyhxb8RMsx5T6Ko0pFH3DIymiL4
 xpoZmAUflOjD0c+99FwHRQqKKXuo3OelhW+YOm0N6OOAt6JMSGmKpZh0UNJx+Fgj
 wMwiQ0X3Y5SaAsr5ZpXM+G1BV7ajihsMpu8/a718ERB3U3cLDz2qJfnzJh+E5Ip5
 pYB4vS3+/FAER2MYQ7IPeovch2wWYtxDPztOxNX6SORu3OvpWiz1GR/+8u0tqj50
 ROq97Jwjh5Tl4zP356EUSj/Vkfdr2yb+NlLbun8My5x8tYftZjnrNQ/+qeJNLwB8
 tWTrg166ox/VX3aYZruAgUPv0IyGPZg7qZV5R72ChBK3VhIbOOLOCm/V6dhvl/XH
 vu2FG7J8WylWHmc+OU8u7TeSJdrwxTLs4e2IFUBK9ymAYFp0Q9S924fgvSYsFvVB
 iNn58SPRIbuA4SPtRfCd7pENtZW/QKfBC5CYK+pjsZVX40c9dbe40foVu4t2/EAo
 gi9+gSWEUVRRW2osxjaHXh78cW63g0j9bNfS6n1Vy32Oo5Mwm7n+bVWqCU5bCBXI
 MpPOk6AgME3UPwFzGzSmx+PVw8VacPxYP1NF8RFTCwj7OowFnrolJtruDmKJgXWY
 BN41EDo41k/C5mEu16Jr9rAkHeVhHaNZ+JhyDrzv8llJ/rv+4zEJw9SrhnpufmOX
 +YERd/ndAw==
 =Erfk
 -----END PGP SIGNATURE-----

Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux

Pull io_uring updates from Jens Axboe:

 - Cleanup of the io-wq per-node mapping, notably getting rid of it so
   we just have a single io_wq entry per ring (Breno)

 - Followup to the above, move accounting to io_wq as well and
   completely drop struct io_wqe (Gabriel)

 - Enable KASAN for the internal io_uring caches (Breno)

 - Add support for multishot timeouts. Some applications use timeouts to
   wake someone waiting on completion entries, and this makes it a bit
   easier to just have a recurring timer rather than needing to rearm it
   every time (David)

 - Support archs that have shared cache coloring between userspace and
   the kernel, and hence have strict address requirements for mmap'ing
   the ring into userspace. This should only be parisc/hppa. (Helge, me)

 - XFS has supported O_DIRECT writes without needing to lock the inode
   exclusively for a long time, and ext4 now supports it as well. This
   is true for the common cases of not extending the file size. Flag the
   fs as having that feature, and utilize that to avoid serializing
   those writes in io_uring (me)

 - Enable completion batching for uring commands (me)

 - Revert patch adding io_uring restriction to what can be GUP mapped or
   not. This does not belong in io_uring, as io_uring isn't really
   special in this regard. Since this is also getting in the way of
   cleanups and improvements to the GUP code, get rid of if (me)

 - A few series greatly reducing the complexity of registered resources,
   like buffers or files. Not only does this clean up the code a lot,
   the simplified code is also a LOT more efficient (Pavel)

 - Series optimizing how we wait for events and run task_work related to
   it (Pavel)

 - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)

 - Misc cleanups and improvements (Pavel, me)

* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
  Revert "io_uring/rsrc: disallow multi-source reg buffers"
  io_uring: add support for multishot timeouts
  io_uring/rsrc: disassociate nodes and rsrc_data
  io_uring/rsrc: devirtualise rsrc put callbacks
  io_uring/rsrc: pass node to io_rsrc_put_work()
  io_uring/rsrc: inline io_rsrc_put_work()
  io_uring/rsrc: add empty flag in rsrc_node
  io_uring/rsrc: merge nodes and io_rsrc_put
  io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
  io_uring/rsrc: remove unused io_rsrc_node::llist
  io_uring/rsrc: refactor io_queue_rsrc_removal
  io_uring/rsrc: simplify single file node switching
  io_uring/rsrc: clean up __io_sqe_buffers_update()
  io_uring/rsrc: inline switch_start fast path
  io_uring/rsrc: remove rsrc_data refs
  io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
  io_uring/rsrc: use wq for quiescing
  io_uring/rsrc: refactor io_rsrc_ref_quiesce
  io_uring/rsrc: remove io_rsrc_node::done
  io_uring/rsrc: use nospec'ed indexes
  ...
 2023-04-26 12:40:31 -07:00
Linus Torvalds
11b32219cb legacy direct-io cleanup 
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYDPAAKCRBZ7Krx/gZQ
 65qvAQC60ak71gAqOSktR93GXYrQ5Q8hbpug7t3lzDQE9huGqgEAl0Zvr8d5ir3j
 y0X5U5Yl6bcUSQDd4VY76C+53yIKZQs=
 =rKXE
 -----END PGP SIGNATURE-----

Merge tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull legacy dio cleanup from Al Viro.

* tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  __blockdev_direct_IO(): get rid of submit_io callback
 2023-04-24 19:28:49 -07:00
Ritesh Harjani (IBM)
f6c73a1113 fs.h: Add TRACE_IOCB_STRINGS for use in trace points 
Add TRACE_IOCB_STRINGS macro which can be used in the trace point patch to
print different flag values with meaningful string output.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: line up strings all prettylike]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 2023-04-21 08:52:42 -07:00
Jens Axboe
d8aeb44a9a fs: add FMODE_DIO_PARALLEL_WRITE flag 
Some filesystems support multiple threads writing to the same file with
O_DIRECT without requiring exclusive access to it. io_uring can use this
hint to avoid serializing dio writes to this inode, instead allowing them
to run in parallel.

XFS and ext4 both fall into this category, so set the flag for both of
them.

Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2023-04-03 07:14:20 -06:00
Christian Brauner
4f704d9a83
nfs: use vfs setgid helper 
We've aligned setgid behavior over multiple kernel releases. The details
can be found in the following two merge messages:
cf619f8919 ("Merge tag 'fs.ovl.setgid.v6.2')
426b4ca2d6 ("Merge tag 'fs.setgid.v6.0')
Consistent setgid stripping behavior is now encapsulated in the
setattr_should_drop_sgid() helper which is used by all filesystems that
strip setgid bits outside of vfs proper. Switch nfs to rely on this
helper as well. Without this patch the setgid stripping tests in
xfstests will fail.

Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230313-fs-nfs-setgid-v2-1-9a59f436cfc0@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2023-03-30 08:51:48 +02:00
Al Viro
0aaf08de84 __blockdev_direct_IO(): get rid of submit_io callback 
always NULL...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2023-03-05 20:27:41 -05:00
Linus Torvalds
3822a7c409 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add 
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X bit.
 
 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.
 
 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes
 
 - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
   does perform some memcg maintenance and cleanup work.
 
 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".  These filters provide users
   with finer-grained control over DAMOS's actions.  SeongJae has also done
   some DAMON cleanup work.
 
 - Kairui Song adds a series ("Clean up and fixes for swap").
 
 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".
 
 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series.  It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.
 
 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".
 
 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".
 
 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".
 
 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".
 
 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series "mm:
   support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
   PTEs".
 
 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".
 
 - Sergey Senozhatsky has improved zsmalloc's memory utilization with his
   series "zsmalloc: make zspage chain size configurable".
 
 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.  The previous BPF-based approach had
   shortcomings.  See "mm: In-kernel support for memory-deny-write-execute
   (MDWE)".
 
 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
 
 - T.J.  Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".
 
 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a per-node
   basis.  See the series "Introduce per NUMA node memory error
   statistics".
 
 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage during
   compaction".
 
 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".
 
 - Christoph Hellwig has removed block_device_operations.rw_page() in ths
   series "remove ->rw_page".
 
 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".
 
 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier functions".
 
 - Some pagemap cleanup and generalization work in Mike Rapoport's series
   "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
   "fixups for generic implementation of pfn_valid()"
 
 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
 
 - Jason Gunthorpe rationalized the GUP system's interface to the rest of
   the kernel in the series "Simplify the external interface for GUP".
 
 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface.  To support this, we'll temporarily be
   printing warnings when people use the debugfs interface.  See the series
   "mm/damon: deprecate DAMON debugfs interface".
 
 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.
 
 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".
 
 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
 jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
 DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
 =MlGs
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
   F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X
   bit.

 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.

 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes

 - Johannes Weiner has a series ("mm: push down lock_page_memcg()")
   which does perform some memcg maintenance and cleanup work.

 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".

   These filters provide users with finer-grained control over DAMOS's
   actions. SeongJae has also done some DAMON cleanup work.

 - Kairui Song adds a series ("Clean up and fixes for swap").

 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".

 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.

 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".

 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".

 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".

 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".

 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series
   "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
   swap PTEs".

 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".

 - Sergey Senozhatsky has improved zsmalloc's memory utilization with
   his series "zsmalloc: make zspage chain size configurable".

 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.

   The previous BPF-based approach had shortcomings. See "mm: In-kernel
   support for memory-deny-write-execute (MDWE)".

 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

 - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".

 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a
   per-node basis. See the series "Introduce per NUMA node memory error
   statistics".

 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage
   during compaction".

 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".

 - Christoph Hellwig has removed block_device_operations.rw_page() in
   ths series "remove ->rw_page".

 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".

 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier
   functions".

 - Some pagemap cleanup and generalization work in Mike Rapoport's
   series "mm, arch: add generic implementation of pfn_valid() for
   FLATMEM" and "fixups for generic implementation of pfn_valid()"

 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

 - Jason Gunthorpe rationalized the GUP system's interface to the rest
   of the kernel in the series "Simplify the external interface for
   GUP".

 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface. To support this, we'll temporarily be
   printing warnings when people use the debugfs interface. See the
   series "mm/damon: deprecate DAMON debugfs interface".

 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.

 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".

 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
  include/linux/migrate.h: remove unneeded externs
  mm/memory_hotplug: cleanup return value handing in do_migrate_range()
  mm/uffd: fix comment in handling pte markers
  mm: change to return bool for isolate_movable_page()
  mm: hugetlb: change to return bool for isolate_hugetlb()
  mm: change to return bool for isolate_lru_page()
  mm: change to return bool for folio_isolate_lru()
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  kmsan: disable ftrace in kmsan core code
  kasan: mark addr_has_metadata __always_inline
  mm: memcontrol: rename memcg_kmem_enabled()
  sh: initialize max_mapnr
  m68k/nommu: add missing definition of ARCH_PFN_OFFSET
  mm: percpu: fix incorrect size in pcpu_obj_full_size()
  maple_tree: reduce stack usage with gcc-9 and earlier
  mm: page_alloc: call panic() when memoryless node allocation fails
  mm: multi-gen LRU: avoid futile retries
  migrate_pages: move THP/hugetlb migration support check to simplify code
  migrate_pages: batch flushing TLB
  migrate_pages: share more code between _unmap and _move
  ...
 2023-02-23 17:09:35 -08:00
Linus Torvalds
307e14c039 46 fs/cifs (smb3 client) changesets, 37 in fs/cifs and 9 for related helper functions and cleanup outside from Dave Howells and Willy 
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmP2kaAACgkQiiy9cAdy
 T1Eergv9FHVs7hS0anJF0xgRghR4+g0m5UUo08iJazgJdDgcS5JY+ZasIpYpEsG3
 QmsIT33XVYZypXoOzjMSsPlwo6esTCJQScVLz85e4ebedCbCBDks+wVQcbfTzD5/
 KrwmUoTBLU0L/ppFhqRk9k53nrSf1SXCWPthjdfWa3mTHdIVM4kQJruTWwUDiJXp
 mdYwTx6FnTNer3QWetNzYOwdUgLu3rk0zLcBwQNCo6g5LOpA44iFfEAO4zeiOuZT
 LMDPbDj0nWQyWPLLdcbtsn2laYyEBDBLZevLirSaqPQ/KCtGcw0mBt6dCAzg8/CM
 ONqHHxdEpvPON8Sxujcn4CxpXhl0nCLwwtKtWU4rt7IevI9U+PynNl57TtJJ16/s
 b3XD2QVbFjlcdAMTmArvqnogdzoC3mZu1R1IRs+jukhLAOqZiLN6o/E2HAllt47i
 krzXeXIzQr10w9fnJ7LtIc/7IUFgtUfrOkg4TKyNcnRVHQaSSxv+JLRgqMPOr/M0
 I7zt0G0j
 =4hIT
 -----END PGP SIGNATURE-----

Merge tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client updates from Steve French:
 "The largest subset of this is from David Howells et al: making the
  cifs/smb3 driver pass iov_iters down to the lowest layers, directly to
  the network transport rather than passing lists of pages around,
  helping multiple areas:

   - Pin user pages, thereby fixing the race between concurrent DIO read
     and fork, where the pages containing the DIO read buffer may end up
     belonging to the child process and not the parent - with the result
     that the parent might not see the retrieved data.

   - cifs shouldn't take refs on pages extracted from non-user-backed
     iterators (eg. KVEC). With these changes, cifs will apply the
     appropriate cleanup.

   - Making it easier to transition to using folios in cifs rather than
     pages by dealing with them through BVEC and XARRAY iterators.

   - Allowing cifs to use the new splice function

  The remainder are:

   - fixes for stable, including various fixes for uninitialized memory,
     wrong length field causing mount issue to very old servers,
     important directory lease fixes and reconnect fixes

   - cleanups (unused code removal, change one element array usage, and
     a change form strtobool to kstrtobool, and Kconfig cleanups)

   - SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes

   - reconnect fixes

   - multichannel fixes, including improving channel allocation (to
     least used channel)

   - remove the last use of lock_page_killable by moving to
     folio_lock_killable"

* tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
  update internal module version number for cifs.ko
  cifs: update ip_addr for ses only for primary chan setup
  cifs: use tcon allocation functions even for dummy tcon
  cifs: use the least loaded channel for sending requests
  cifs: DIO to/from KVEC-type iterators should now work
  cifs: Remove unused code
  cifs: Build the RDMA SGE list directly from an iterator
  cifs: Change the I/O paths to use an iterator rather than a page list
  cifs: Add a function to read into an iter from a socket
  cifs: Add some helper functions
  cifs: Add a function to Hash the contents of an iterator
  cifs: Add a function to build an RDMA SGE list from an iterator
  netfs: Add a function to extract an iterator into a scatterlist
  netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
  cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
  splice: Export filemap/direct_splice_read()
  iov_iter: Add a function to extract a page list from an iterator
  iov_iter: Define flags to qualify page extraction.
  splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
  splice: Add a func to do a splice from a buffered file without ITER_PIPE
  ...
 2023-02-22 17:12:44 -08:00
David Howells
33b3b04154 splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE 
Implement a function, direct_file_splice(), that deals with this by using
an ITER_BVEC iterator instead of an ITER_PIPE iterator as the former won't
free its buffers when reverted.  The function bulk allocates all the
buffers it thinks it is going to use in advance, does the read
synchronously and only then trims the buffer down.  The pages we did use
get pushed into the pipe.

This fixes a problem with the upcoming iov_iter_extract_pages() function,
whereby pages extracted from a non-user-backed iterator such as ITER_PIPE
aren't pinned.  __iomap_dio_rw(), however, calls iov_iter_revert() to
shorten the iterator to just the bufferage it is going to use - which has
the side-effect of freeing the excess pipe buffers, even though they're
attached to a bio and may get written to by DMA (thanks to Hillf Danton for
spotting this[1]).

This then causes memory corruption that is particularly noticeable when the
syzbot test[2] is run.  The test boils down to:

	out = creat(argv[1], 0666);
	ftruncate(out, 0x800);
	lseek(out, 0x200, SEEK_SET);
	in = open(argv[1], O_RDONLY | O_DIRECT | O_NOFOLLOW);
	sendfile(out, in, NULL, 0x1dd00);

run repeatedly in parallel.  What I think is happening is that ftruncate()
occasionally shortens the DIO read that's about to be made by sendfile's
splice core by reducing i_size.

This should be more efficient for DIO read by virtue of doing a bulk page
allocation, but slightly less efficient by ignoring any partial page in the
pipe.

Reported-by: syzbot+a440341a59e3b7142895@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230207094731.1390-1-hdanton@sina.com/ [1]
Link: https://lore.kernel.org/r/000000000000b0b3c005f3a09383@google.com/ [2]
Signed-off-by: Steve French <stfrench@microsoft.com>
 2023-02-20 17:25:43 -06:00
David Howells
07073eb01c splice: Add a func to do a splice from a buffered file without ITER_PIPE 
Provide a function to do splice read from a buffered file, pulling the
folios out of the pagecache directly by calling filemap_get_pages() to do
any required reading and then pasting the returned folios into the pipe.

A helper function is provided to do the actual folio pasting and will
handle multipage folios by splicing as many of the relevant subpages as
will fit into the pipe.

The code is loosely based on filemap_read() and might belong in
mm/filemap.c with that as it needs to use filemap_get_pages().

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
 2023-02-20 17:25:43 -06:00
Linus Torvalds
05e6295f7b fs.idmapped.v6.3 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
 orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
 Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
 =+BG5
 -----END PGP SIGNATURE-----

Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull vfs idmapping updates from Christian Brauner:

 - Last cycle we introduced the dedicated struct mnt_idmap type for
   mount idmapping and the required infrastucture in 256c8aed2b ("fs:
   introduce dedicated idmap type for mounts"). As promised in last
   cycle's pull request message this converts everything to rely on
   struct mnt_idmap.

   Currently we still pass around the plain namespace that was attached
   to a mount. This is in general pretty convenient but it makes it easy
   to conflate namespaces that are relevant on the filesystem with
   namespaces that are relevant on the mount level. Especially for
   non-vfs developers without detailed knowledge in this area this was a
   potential source for bugs.

   This finishes the conversion. Instead of passing the plain namespace
   around this updates all places that currently take a pointer to a
   mnt_userns with a pointer to struct mnt_idmap.

   Now that the conversion is done all helpers down to the really
   low-level helpers only accept a struct mnt_idmap argument instead of
   two namespace arguments.

   Conflating mount and other idmappings will now cause the compiler to
   complain loudly thus eliminating the possibility of any bugs. This
   makes it impossible for filesystem developers to mix up mount and
   filesystem idmappings as they are two distinct types and require
   distinct helpers that cannot be used interchangeably.

   Everything associated with struct mnt_idmap is moved into a single
   separate file. With that change no code can poke around in struct
   mnt_idmap. It can only be interacted with through dedicated helpers.
   That means all filesystems are and all of the vfs is completely
   oblivious to the actual implementation of idmappings.

   We are now also able to extend struct mnt_idmap as we see fit. For
   example, we can decouple it completely from namespaces for users that
   don't require or don't want to use them at all. We can also extend
   the concept of idmappings so we can cover filesystem specific
   requirements.

   In combination with the vfs{g,u}id_t work we finished in v6.2 this
   makes this feature substantially more robust and thus difficult to
   implement wrong by a given filesystem and also protects the vfs.

 - Enable idmapped mounts for tmpfs and fulfill a longstanding request.

   A long-standing request from users had been to make it possible to
   create idmapped mounts for tmpfs. For example, to share the host's
   tmpfs mount between multiple sandboxes. This is a prerequisite for
   some advanced Kubernetes cases. Systemd also has a range of use-cases
   to increase service isolation. And there are more users of this.

   However, with all of the other work going on this was way down on the
   priority list but luckily someone other than ourselves picked this
   up.

   As usual the patch is tiny as all the infrastructure work had been
   done multiple kernel releases ago. In addition to all the tests that
   we already have I requested that Rodrigo add a dedicated tmpfs
   testsuite for idmapped mounts to xfstests. It is to be included into
   xfstests during the v6.3 development cycle. This should add a slew of
   additional tests.

* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
  shmem: support idmapped mounts for tmpfs
  fs: move mnt_idmap
  fs: port vfs{g,u}id helpers to mnt_idmap
  fs: port fs{g,u}id helpers to mnt_idmap
  fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
  fs: port i_{g,u}id_{needs_}update() to mnt_idmap
  quota: port to mnt_idmap
  fs: port privilege checking helpers to mnt_idmap
  fs: port inode_owner_or_capable() to mnt_idmap
  fs: port inode_init_owner() to mnt_idmap
  fs: port acl to mnt_idmap
  fs: port xattr to mnt_idmap
  fs: port ->permission() to pass mnt_idmap
  fs: port ->fileattr_set() to pass mnt_idmap
  fs: port ->set_acl() to pass mnt_idmap
  fs: port ->get_acl() to pass mnt_idmap
  fs: port ->tmpfile() to pass mnt_idmap
  fs: port ->rename() to pass mnt_idmap
  fs: port ->mknod() to pass mnt_idmap
  fs: port ->mkdir() to pass mnt_idmap
  ...
 2023-02-20 11:53:11 -08:00
Christian Brauner
4d7ca40901
fs: port vfs{g,u}id helpers to mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:30 +01:00
Christian Brauner
c14329d39f
fs: port fs{g,u}id helpers to mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:30 +01:00
Christian Brauner
e67fe63341
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap 
Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:29 +01:00
Christian Brauner
0dbe12f2e4
fs: port i_{g,u}id_{needs_}update() to mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:29 +01:00
Christian Brauner
9452e93e6d
fs: port privilege checking helpers to mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:29 +01:00
Christian Brauner
01beba7957
fs: port inode_owner_or_capable() to mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:29 +01:00
Christian Brauner
f2d40141d5
fs: port inode_init_owner() to mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:28 +01:00
Christian Brauner
4609e1f18e
fs: port ->permission() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:28 +01:00
Christian Brauner
8782a9aea3
fs: port ->fileattr_set() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:27 +01:00
Christian Brauner
13e83a4923
fs: port ->set_acl() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:27 +01:00
Christian Brauner
7743532277
fs: port ->get_acl() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:27 +01:00
Christian Brauner
011e2b717b
fs: port ->tmpfile() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:27 +01:00
Christian Brauner
e18275ae55
fs: port ->rename() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:26 +01:00
Christian Brauner
5ebb29bee8
fs: port ->mknod() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:26 +01:00
Christian Brauner
c54bd91e9e
fs: port ->mkdir() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:26 +01:00
Christian Brauner
7a77db9551
fs: port ->symlink() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:25 +01:00
Christian Brauner
6c960e68aa
fs: port ->create() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:25 +01:00
Christian Brauner
b74d24f7a7
fs: port ->getattr() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:25 +01:00
Christian Brauner
c1632a0f11
fs: port ->setattr() to pass mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-19 09:24:02 +01:00
Yu Zhao
17e810229c mm: support POSIX_FADV_NOREUSE 
This patch adds POSIX_FADV_NOREUSE to vma_has_recency() so that the LRU
algorithm can ignore access to mapped files marked by this flag.

The advantages of POSIX_FADV_NOREUSE are:
1. Unlike MADV_SEQUENTIAL and MADV_RANDOM, it does not alter the
   default readahead behavior.
2. Unlike MADV_SEQUENTIAL and MADV_RANDOM, it does not split VMAs and
   therefore does not take mmap_lock.
3. Unlike MADV_COLD, setting it has a negligible cost, regardless of
   how many pages it affects.

Its limitations are:
1. Like POSIX_FADV_RANDOM and POSIX_FADV_SEQUENTIAL, it currently does
   not support range. IOW, its scope is the entire file.
2. It currently does not ignore access through file descriptors.
   Specifically, for the active/inactive LRU, given a file page shared
   by two users and one of them having set POSIX_FADV_NOREUSE on the
   file, this page will be activated upon the second user accessing
   it. This corner case can be covered by checking POSIX_FADV_NOREUSE
   before calling folio_mark_accessed() on the read path. But it is
   considered not worth the effort.

There have been a few attempts to support POSIX_FADV_NOREUSE, e.g., [1]. 
This time the goal is to fill a niche: a few desktop applications, e.g.,
large file transferring and video encoding/decoding, want fast file
streaming with mmap() rather than direct IO.  Among those applications, an
SVT-AV1 regression was reported when running with MGLRU [2].  The
following test can reproduce that regression.

  kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo)
  kb=$((kb - 8*1024*1024))

  modprobe brd rd_nr=1 rd_size=$kb
  dd if=/dev/zero of=/dev/ram0 bs=1M

  mkfs.ext4 /dev/ram0
  mount /dev/ram0 /mnt/
  swapoff -a

  fallocate -l 8G /mnt/swapfile
  mkswap /mnt/swapfile
  swapon /mnt/swapfile

  wget http://ultravideo.cs.tut.fi/video/Bosphorus_3840x2160_120fps_420_8bit_YUV_Y4M.7z
  7z e -o/mnt/ Bosphorus_3840x2160_120fps_420_8bit_YUV_Y4M.7z
  SvtAv1EncApp --preset 12 -w 3840 -h 2160 \
               -i /mnt/Bosphorus_3840x2160.y4m

For MGLRU, the following change showed a [9-11]% increase in FPS,
which makes it on par with the active/inactive LRU.

  patch Source/App/EncApp/EbAppMain.c <<EOF
  31a32
  > #include <fcntl.h>
  35d35
  < #include <fcntl.h> /* _O_BINARY */
  117a118
  >             posix_fadvise(config->mmap.fd, 0, 0, POSIX_FADV_NOREUSE);
  EOF

[1] https://lore.kernel.org/r/1308923350-7932-1-git-send-email-andrea@betterlinux.com/
[2] https://openbenchmarking.org/result/2209259-PTS-MGLRU8GB57

Link: https://lkml.kernel.org/r/20221230215252.2628425-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Righi <andrea.righi@canonical.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-01-18 17:12:57 -08:00
Christian Brauner
abf08576af
fs: port vfs_*() helpers to struct mnt_idmap 
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2023-01-18 17:51:45 +01:00
Jeff Layton
5970e15dbc filelock: move file locking definitions to separate header file 
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.

Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.

Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
 2023-01-11 06:52:32 -05:00
Xiubo Li
8e1858710d ceph: avoid use-after-free in ceph_fl_release_lock() 
When ceph releasing the file_lock it will try to get the inode pointer
from the fl->fl_file, which the memory could already be released by
another thread in filp_close(). Because in VFS layer the fl->fl_file
doesn't increase the file's reference counter.

Will switch to use ceph dedicate lock info to track the inode.

And in ceph_fl_release_lock() we should skip all the operations if the
fl->fl_u.ceph.inode is not set, which should come from the request
file_lock. And we will set fl->fl_u.ceph.inode when inserting it to the
inode lock list, which is when copying the lock.

Link: https://tracker.ceph.com/issues/57986
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
 2023-01-02 12:27:25 +01:00
Linus Torvalds
9b93f5069f fs.idmapped.mnt_idmap.v6.2 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5by6AAKCRCRxhvAZXjc
 onblAPsFzodV8/9UoCIkKxwn0aiclbiAITTWI9ZLulmKhm0I6wD/RUOLKjt12uZJ
 m81UTfkWHopWKtQ+X3saZEcyYTNLugE=
 =AtGb
 -----END PGP SIGNATURE-----

Merge tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull idmapping updates from Christian Brauner:
 "Last cycle we've already made the interaction with idmapped mounts
  more robust and type safe by introducing the vfs{g,u}id_t type. This
  cycle we concluded the conversion and removed the legacy helpers.

  Currently we still pass around the plain namespace that was attached
  to a mount. This is in general pretty convenient but it makes it easy
  to conflate namespaces that are relevant on the filesystem - with
  namespaces that are relevent on the mount level. Especially for
  filesystem developers without detailed knowledge in this area this can
  be a potential source for bugs.

  Instead of passing the plain namespace we introduce a dedicated type
  struct mnt_idmap and replace the pointer with a pointer to a struct
  mnt_idmap. There are no semantic or size changes for the mount struct
  caused by this.

  We then start converting all places aware of idmapped mounts to rely
  on struct mnt_idmap. Once the conversion is done all helpers down to
  the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take
  a struct mnt_idmap argument instead of two namespace arguments. This
  way it becomes impossible to conflate the two removing and thus
  eliminating the possibility of any bugs. Fwiw, I fixed some issues in
  that area a while ago in ntfs3 and ksmbd in the past. Afterwards only
  low-level code can ultimately use the associated namespace for any
  permission checks. Even most of the vfs can be completely obivious
  about this ultimately and filesystems will never interact with it in
  any form in the future.

  A struct mnt_idmap currently encompasses a simple refcount and pointer
  to the relevant namespace the mount is idmapped to. If a mount isn't
  idmapped then it will point to a static nop_mnt_idmap and if it
  doesn't that it is idmapped. As usual there are no allocations or
  anything happening for non-idmapped mounts. Everthing is carefully
  written to be a nop for non-idmapped mounts as has always been the
  case.

  If an idmapped mount is created a struct mnt_idmap is allocated and a
  reference taken on the relevant namespace. Each mount that gets
  idmapped or inherits the idmap simply bumps the reference count on
  struct mnt_idmap. Just a reminder that we only allow a mount to change
  it's idmapping a single time and only if it hasn't already been
  attached to the filesystems and has no active writers.

  The actual changes are fairly straightforward but this will have huge
  benefits for maintenance and security in the long run even if it
  causes some churn.

  Note that this also makes it possible to extend struct mount_idmap in
  the future. For example, it would be possible to place the namespace
  pointer in an anonymous union together with an idmapping struct. This
  would allow us to expose an api to userspace that would let it specify
  idmappings directly instead of having to go through the detour of
  setting up namespaces at all"

* tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  acl: conver higher-level helpers to rely on mnt_idmap
  fs: introduce dedicated idmap type for mounts
 2022-12-12 19:30:18 -08:00
Linus Torvalds
e1212e9b6f fs.vfsuid.conversion.v6.2 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bspgAKCRCRxhvAZXjc
 opEWAQDpF5rnZn1vv4/uOTij9ztcA4yLxu/Q19CdqBaoHlWZ9AD/d3eecee3bh5h
 iPHtlUK5/VspfD9LPpdc5ZbPCdZ2pA4=
 =t6NN
 -----END PGP SIGNATURE-----

Merge tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull vfsuid updates from Christian Brauner:
 "Last cycle we introduced the vfs{g,u}id_t types and associated helpers
  to gain type safety when dealing with idmapped mounts. That initial
  work already converted a lot of places over but there were still some
  left,

  This converts all remaining places that still make use of non-type
  safe idmapping helpers to rely on the new type safe vfs{g,u}id based
  helpers.

  Afterwards it removes all the old non-type safe helpers"

* tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: remove unused idmapping helpers
  ovl: port to vfs{g,u}id_t and associated helpers
  fuse: port to vfs{g,u}id_t and associated helpers
  ima: use type safe idmapping helpers
  apparmor: use type safe idmapping helpers
  caps: use type safe idmapping helpers
  fs: use type safe idmapping helpers
  mnt_idmapping: add missing helpers
 2022-12-12 19:20:05 -08:00
Linus Torvalds
cf619f8919 fs.ovl.setgid.v6.2 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bt7AAKCRCRxhvAZXjc
 ovAOAP9qcrUqs2MoyBDe6qUXThYY9w2rgX/ZI4ZZmbtsXEDGtQEA/LPddq8lD8o9
 m17zpvMGbXXRwz4/zVGuyWsHgg0HsQ0=
 =ioRq
 -----END PGP SIGNATURE-----

Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull setgid inheritance updates from Christian Brauner:
 "This contains the work to make setgid inheritance consistent between
  modifying a file and when changing ownership or mode as this has been
  a repeated source of very subtle bugs. The gist is that we perform the
  same permission checks in the write path as we do in the ownership and
  mode changing paths after this series where we're currently doing
  different things.

  We've already made setgid inheritance a lot more consistent and
  reliable in the last releases by moving setgid stripping from the
  individual filesystems up into the vfs. This aims to make the logic
  even more consistent and easier to understand and also to fix
  long-standing overlayfs setgid inheritance bugs. Miklos was nice
  enough to just let me carry the trivial overlayfs patches from Amir
  too.

  Below is a more detailed explanation how the current difference in
  setgid handling lead to very subtle bugs exemplified via overlayfs
  which is a victim of the current rules. I hope this explains why I
  think taking the regression risk here is worth it.

  A long while ago I found a few setgid inheritance bugs in overlayfs in
  the write path in certain conditions. Amir recently picked this back
  up in [1] and I jumped on board to fix this more generally.

  On the surface all that overlayfs would need to fix setgid inheritance
  would be to call file_remove_privs() or file_modified() but actually
  that isn't enough because the setgid inheritance api is wildly
  inconsistent in that area.

  Before this pr setgid stripping in file_remove_privs()'s old
  should_remove_suid() helper was inconsistent with other parts of the
  vfs. Specifically, it only raises ATTR_KILL_SGID if the inode is
  S_ISGID and S_IXGRP but not if the inode isn't in the caller's groups
  and the caller isn't privileged over the inode although we require
  this already in setattr_prepare() and setattr_copy() and so all
  filesystem implement this requirement implicitly because they have to
  use setattr_{prepare,copy}() anyway.

  But the inconsistency shows up in setgid stripping bugs for overlayfs
  in xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
  generic/687). For example, we test whether suid and setgid stripping
  works correctly when performing various write-like operations as an
  unprivileged user (fallocate, reflink, write, etc.):

      echo "Test 1 - qa_user, non-exec file $verb"
      setup_testfile
      chmod a+rws $junk_file
      commit_and_check "$qa_user" "$verb" 64k 64k

  The test basically creates a file with 6666 permissions. While the
  file has the S_ISUID and S_ISGID bits set it does not have the S_IXGRP
  set.

  On a regular filesystem like xfs what will happen is:

      sys_fallocate()
      -> vfs_fallocate()
         -> xfs_file_fallocate()
            -> file_modified()
               -> __file_remove_privs()
                  -> dentry_needs_remove_privs()
                     -> should_remove_suid()
                  -> __remove_privs()
                     newattrs.ia_valid = ATTR_FORCE | kill;
                     -> notify_change()
                        -> setattr_copy()

  In should_remove_suid() we can see that ATTR_KILL_SUID is raised
  unconditionally because the file in the test has S_ISUID set.

  But we also see that ATTR_KILL_SGID won't be set because while the
  file is S_ISGID it is not S_IXGRP (see above) which is a condition for
  ATTR_KILL_SGID being raised.

  So by the time we call notify_change() we have attr->ia_valid set to
  ATTR_KILL_SUID | ATTR_FORCE.

  Now notify_change() sees that ATTR_KILL_SUID is set and does:

      ia_valid      = attr->ia_valid |= ATTR_MODE
      attr->ia_mode = (inode->i_mode & ~S_ISUID);

  which means that when we call setattr_copy() later we will definitely
  update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

  Now we call into the filesystem's ->setattr() inode operation which
  will end up calling setattr_copy(). Since ATTR_MODE is set we will
  hit:

      if (ia_valid & ATTR_MODE) {
              umode_t mode = attr->ia_mode;
              vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
              if (!vfsgid_in_group_p(vfsgid) &&
                  !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
                      mode &= ~S_ISGID;
              inode->i_mode = mode;
      }

  and since the caller in the test is neither capable nor in the group
  of the inode the S_ISGID bit is stripped.

  But assume the file isn't suid then ATTR_KILL_SUID won't be raised
  which has the consequence that neither the setgid nor the suid bits
  are stripped even though it should be stripped because the inode isn't
  in the caller's groups and the caller isn't privileged over the inode.

  If overlayfs is in the mix things become a bit more complicated and
  the bug shows up more clearly.

  When e.g., ovl_setattr() is hit from ovl_fallocate()'s call to
  file_remove_privs() then ATTR_KILL_SUID and ATTR_KILL_SGID might be
  raised but because the check in notify_change() is questioning the
  ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be stripped
  the S_ISGID bit isn't removed even though it should be stripped:

      sys_fallocate()
      -> vfs_fallocate()
         -> ovl_fallocate()
            -> file_remove_privs()
               -> dentry_needs_remove_privs()
                  -> should_remove_suid()
               -> __remove_privs()
                  newattrs.ia_valid = ATTR_FORCE | kill;
                  -> notify_change()
                     -> ovl_setattr()
                        /* TAKE ON MOUNTER'S CREDS */
                        -> ovl_do_notify_change()
                           -> notify_change()
                        /* GIVE UP MOUNTER'S CREDS */
           /* TAKE ON MOUNTER'S CREDS */
           -> vfs_fallocate()
              -> xfs_file_fallocate()
                 -> file_modified()
                    -> __file_remove_privs()
                       -> dentry_needs_remove_privs()
                          -> should_remove_suid()
                       -> __remove_privs()
                          newattrs.ia_valid = attr_force | kill;
                          -> notify_change()

  The fix for all of this is to make file_remove_privs()'s
  should_remove_suid() helper perform the same checks as we already
  require in setattr_prepare() and setattr_copy() and have
  notify_change() not pointlessly requiring S_IXGRP again. It doesn't
  make any sense in the first place because the caller must calculate
  the flags via should_remove_suid() anyway which would raise
  ATTR_KILL_SGID

  Note that some xfstests will now fail as these patches will cause the
  setgid bit to be lost in certain conditions for unprivileged users
  modifying a setgid file when they would've been kept otherwise. I
  think this risk is worth taking and I explained and mentioned this
  multiple times on the list [2].

  Enforcing the rules consistently across write operations and
  chmod/chown will lead to losing the setgid bit in cases were it
  might've been retained before.

  While I've mentioned this a few times but it's worth repeating just to
  make sure that this is understood. For the sake of maintainability,
  consistency, and security this is a risk worth taking.

  If we really see regressions for workloads the fix is to have special
  setgid handling in the write path again with different semantics from
  chmod/chown and possibly additional duct tape for overlayfs. I'll
  update the relevant xfstests with if you should decide to merge this
  second setgid cleanup.

  Before that people should be aware that there might be failures for
  fstests where unprivileged users modify a setgid file"

Link: https://lore.kernel.org/linux-fsdevel/20221003123040.900827-1-amir73il@gmail.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20221122142010.zchf2jz2oymx55qi@wittgenstein [2]

* tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: use consistent setgid checks in is_sxid()
  ovl: remove privs in ovl_fallocate()
  ovl: remove privs in ovl_copyfile()
  attr: use consistent sgid stripping checks
  attr: add setattr_should_drop_sgid()
  fs: move should_remove_suid()
  attr: add in_group_or_capable()
 2022-12-12 19:03:10 -08:00
Linus Torvalds
6a518afcc2 fs.acl.rework.v6.2 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bwTgAKCRCRxhvAZXjc
 ovd2AQCK00NAtGjQCjQPQGyTa4GAPqvWgq1ef0lnhv+TL5US5gD9FncQ8UofeMXt
 pBfjtAD6ettTPCTxUQfnTwWEU4rc7Qg=
 =27Wm
 -----END PGP SIGNATURE-----

Merge tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull VFS acl updates from Christian Brauner:
 "This contains the work that builds a dedicated vfs posix acl api.

  The origins of this work trace back to v5.19 but it took quite a while
  to understand the various filesystem specific implementations in
  sufficient detail and also come up with an acceptable solution.

  As we discussed and seen multiple times the current state of how posix
  acls are handled isn't nice and comes with a lot of problems: The
  current way of handling posix acls via the generic xattr api is error
  prone, hard to maintain, and type unsafe for the vfs until we call
  into the filesystem's dedicated get and set inode operations.

  It is already the case that posix acls are special-cased to death all
  the way through the vfs. There are an uncounted number of hacks that
  operate on the uapi posix acl struct instead of the dedicated vfs
  struct posix_acl. And the vfs must be involved in order to interpret
  and fixup posix acls before storing them to the backing store, caching
  them, reporting them to userspace, or for permission checking.

  Currently a range of hacks and duct tape exist to make this work. As
  with most things this is really no ones fault it's just something that
  happened over time. But the code is hard to understand and difficult
  to maintain and one is constantly at risk of introducing bugs and
  regressions when having to touch it.

  Instead of continuing to hack posix acls through the xattr handlers
  this series builds a dedicated posix acl api solely around the get and
  set inode operations.

  Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
  helpers must be used in order to interact with posix acls. They
  operate directly on the vfs internal struct posix_acl instead of
  abusing the uapi posix acl struct as we currently do. In the end this
  removes all of the hackiness, makes the codepaths easier to maintain,
  and gets us type safety.

  This series passes the LTP and xfstests suites without any
  regressions. For xfstests the following combinations were tested:
   - xfs
   - ext4
   - btrfs
   - overlayfs
   - overlayfs on top of idmapped mounts
   - orangefs
   - (limited) cifs

  There's more simplifications for posix acls that we can make in the
  future if the basic api has made it.

  A few implementation details:

   - The series makes sure to retain exactly the same security and
     integrity module permission checks. Especially for the integrity
     modules this api is a win because right now they convert the uapi
     posix acl struct passed to them via a void pointer into the vfs
     struct posix_acl format to perform permission checking on the mode.

     There's a new dedicated security hook for setting posix acls which
     passes the vfs struct posix_acl not a void pointer. Basing checking
     on the posix acl stored in the uapi format is really unreliable.
     The vfs currently hacks around directly in the uapi struct storing
     values that frankly the security and integrity modules can't
     correctly interpret as evidenced by bugs we reported and fixed in
     this area. It's not necessarily even their fault it's just that the
     format we provide to them is sub optimal.

   - Some filesystems like 9p and cifs need access to the dentry in
     order to get and set posix acls which is why they either only
     partially or not even at all implement get and set inode
     operations. For example, cifs allows setxattr() and getxattr()
     operations but doesn't allow permission checking based on posix
     acls because it can't implement a get acl inode operation.

     Thus, this patch series updates the set acl inode operation to take
     a dentry instead of an inode argument. However, for the get acl
     inode operation we can't do this as the old get acl method is
     called in e.g., generic_permission() and inode_permission(). These
     helpers in turn are called in various filesystem's permission inode
     operation. So passing a dentry argument to the old get acl inode
     operation would amount to passing a dentry to the permission inode
     operation which we shouldn't and probably can't do.

     So instead of extending the existing inode operation Christoph
     suggested to add a new one. He also requested to ensure that the
     get and set acl inode operation taking a dentry are consistently
     named. So for this version the old get acl operation is renamed to
     ->get_inode_acl() and a new ->get_acl() inode operation taking a
     dentry is added. With this we can give both 9p and cifs get and set
     acl inode operations and in turn remove their complex custom posix
     xattr handlers.

     In the future I hope to get rid of the inode method duplication but
     it isn't like we have never had this situation. Readdir is just one
     example. And frankly, the overall gain in type safety and the more
     pleasant api wise are simply too big of a benefit to not accept
     this duplication for a while.

   - We've done a full audit of every codepaths using variant of the
     current generic xattr api to get and set posix acls and
     surprisingly it isn't that many places. There's of course always a
     chance that we might have missed some and if so I'm sure we'll find
     them soon enough.

     The crucial codepaths to be converted are obviously stacking
     filesystems such as ecryptfs and overlayfs.

     For a list of all callers currently using generic xattr api helpers
     see [2] including comments whether they support posix acls or not.

   - The old vfs generic posix acl infrastructure doesn't obey the
     create and replace semantics promised on the setxattr(2) manpage.
     This patch series doesn't address this. It really is something we
     should revisit later though.

  The patches are roughly organized as follows:

   (1) Change existing set acl inode operation to take a dentry
       argument (Intended to be a non-functional change)

   (2) Rename existing get acl method (Intended to be a non-functional
       change)

   (3) Implement get and set acl inode operations for filesystems that
       couldn't implement one before because of the missing dentry.
       That's mostly 9p and cifs (Intended to be a non-functional
       change)

   (4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
       and vfs_set_acl() including security and integrity hooks
       (Intended to be a non-functional change)

   (5) Implement get and set acl inode operations for stacking
       filesystems (Intended to be a non-functional change)

   (6) Switch posix acl handling in stacking filesystems to new posix
       acl api now that all filesystems it can stack upon support it.

   (7) Switch vfs to new posix acl api (semantical change)

   (8) Remove all now unused helpers

   (9) Additional regression fixes reported after we merged this into
       linux-next

  Thanks to Seth for a lot of good discussion around this and
  encouragement and input from Christoph"

* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
  posix_acl: Fix the type of sentinel in get_acl
  orangefs: fix mode handling
  ovl: call posix_acl_release() after error checking
  evm: remove dead code in evm_inode_set_acl()
  cifs: check whether acl is valid early
  acl: make vfs_posix_acl_to_xattr() static
  acl: remove a slew of now unused helpers
  9p: use stub posix acl handlers
  cifs: use stub posix acl handlers
  ovl: use stub posix acl handlers
  ecryptfs: use stub posix acl handlers
  evm: remove evm_xattr_acl_change()
  xattr: use posix acl api
  ovl: use posix acl api
  ovl: implement set acl method
  ovl: implement get acl method
  ecryptfs: implement set acl method
  ecryptfs: implement get acl method
  ksmbd: use vfs_remove_acl()
  acl: add vfs_remove_acl()
  ...
 2022-12-12 18:46:39 -08:00
Linus Torvalds
bd90741318 misc pile 
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzrwAKCRBZ7Krx/gZQ
 6+WrAP9QltAQopxexxpRxTdA3yq7Fy9ZakkS7b1udhRHgRA8GgEA7ZcrqX8IsyDW
 hLW4cQPVUkJD7MCR8P7lw5sLaararAg=
 =TchO
 -----END PGP SIGNATURE-----

Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull misc vfs updates from Al Viro:
 "misc pile"

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: sysv: Fix sysv_nblocks() returns wrong value
  get rid of INT_LIMIT, use type_max() instead
  btrfs: replace INT_LIMIT(loff_t) with OFFSET_MAX
  fs: simplify vfs_get_super
  fs: drop useless condition from inode_needs_update_time
 2022-12-12 18:38:47 -08:00
Linus Torvalds
8702f2c611 Non-MM patches for 6.2-rc1. 
- A ptrace API cleanup series from Sergey Shtylyov
 
 - Fixes and cleanups for kexec from ye xingchen
 
 - nilfs2 updates from Ryusuke Konishi
 
 - squashfs feature work from Xiaoming Ni: permit configuration of the
   filesystem's compression concurrency from the mount command line.
 
 - A series from Akinobu Mita which addresses bound checking errors when
   writing to debugfs files.
 
 - A series from Yang Yingliang to address rapido memory leaks
 
 - A series from Zheng Yejian to address possible overflow errors in
   encode_comp_t().
 
 - And a whole shower of singleton patches all over the place.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5efRgAKCRDdBJ7gKXxA
 jgvdAP0al6oFDtaSsshIdNhrzcMwfjt6PfVxxHdLmNhF1hX2dwD/SVluS1bPSP7y
 0sZp7Ustu3YTb8aFkMl96Y9m9mY1Nwg=
 =ga5B
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - A ptrace API cleanup series from Sergey Shtylyov

 - Fixes and cleanups for kexec from ye xingchen

 - nilfs2 updates from Ryusuke Konishi

 - squashfs feature work from Xiaoming Ni: permit configuration of the
   filesystem's compression concurrency from the mount command line

 - A series from Akinobu Mita which addresses bound checking errors when
   writing to debugfs files

 - A series from Yang Yingliang to address rapidio memory leaks

 - A series from Zheng Yejian to address possible overflow errors in
   encode_comp_t()

 - And a whole shower of singleton patches all over the place

* tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits)
  ipc: fix memory leak in init_mqueue_fs()
  hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
  rapidio: devices: fix missing put_device in mport_cdev_open
  kcov: fix spelling typos in comments
  hfs: Fix OOB Write in hfs_asc2mac
  hfs: fix OOB Read in __hfs_brec_find
  relay: fix type mismatch when allocating memory in relay_create_buf()
  ocfs2: always read both high and low parts of dinode link count
  io-mapping: move some code within the include guarded section
  kernel: kcsan: kcsan_test: build without structleak plugin
  mailmap: update email for Iskren Chernev
  eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
  rapidio: fix possible UAF when kfifo_alloc() fails
  relay: use strscpy() is more robust and safer
  cpumask: limit visibility of FORCE_NR_CPUS
  acct: fix potential integer overflow in encode_comp_t()
  acct: fix accuracy loss for input value of encode_comp_t()
  linux/init.h: include <linux/build_bug.h> and <linux/stringify.h>
  rapidio: rio: fix possible name leak in rio_register_mport()
  rapidio: fix possible name leaks when rio_add_device() fails
  ...
 2022-12-12 17:28:58 -08:00
Linus Torvalds
73fa58dca8 File locking changes for v6.2. 
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEES8DXskRxsqGE6vXTAA5oQRlWghUFAmOPOjwTHGpsYXl0b25A
 a2VybmVsLm9yZwAKCRAADmhBGVaCFZ/jEADDZ1RlXCwuozDzAXFzzsR+kmKJJfXG
 ff3ejXHhyJdYH8kh1IldTCR4RGblTH7dM/gO/ApJlSLbEglQm9AIjZ2lpVstqtzQ
 lnZir+bA6uzOyYMRVXJ+0oDZuv3Gca3W8IhFHCqD7K9oQQbn+c/ZmEWrvNJJXN1j
 Ogi1SXHUNfrFgSbgBKjc2VqewuiTc2I8tZAQyezYoGXKn6LtAgMJhQIS4eWjqjju
 38aageni9doKPnAmMOq+vBcw2bWV5mYijz/pObfsaDlAgFdr9rKjNP5+F4fBply1
 SDW2T1ge8jWYegq39EcDKxd/raSOET/p9vQu6rHniXKfvMQ6Ywbr7qji1a7yTZ+i
 MkuOToNZy/+TTEvFQm48Fa25tcKjjl/uuk5Ugojf/hSWOsNkW1Cy4S33eUzDZiSO
 wox5EFVhFpf8Q8L3dUQY0sZazCyoEftw+bq2cKGHJYfUhBD7u6yLG7EKqYiqpepX
 SSPxuh3GC65xl33hYJL2V+5cgXAV23kSGCdNqDUvYZgJfjhDjQnyoSTcuBjh67kv
 chmSoeUaIkS4yFqsH9kRINMSef2M5LXYbfxTnftokX0cvV6RqQndZl43X5LEBgQL
 GRIxyxPkkKaqFjkqyFzBD0dkVGyjyUmkioy/1xON3pLWz3Sk77U38pEQ7NeUl2Lc
 bK5uysBuvDnCpg==
 =XMv7
 -----END PGP SIGNATURE-----

Merge tag 'locks-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull file locking updates from Jeff Layton:
 "The main change here is to add the new locks_inode_context helper, and
  convert all of the places that dereference inode->i_flctx directly to
  use that instead.

  There is a new helper to indicate whether any locks are held on an
  inode. This is mostly for Ceph but may be usable elsewhere too.

  Andi Kleen requested that we print the PID when the LOCK_MAND warning
  fires, to help track down applications trying to use it.

  Finally, we added some new warnings to some of the file locking
  functions that fire when the ->fl_file and filp arguments differ. This
  helped us find some long-standing bugs in lockd. Patches for those are
  in Chuck Lever's tree and should be in his v6.2 PR. After that patch,
  people using NFSv2/v3 locking may see some warnings fire until those
  go in.

  Happy Holidays!"

* tag 'locks-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  Add process name and pid to locks warning
  nfsd: use locks_inode_context helper
  nfs: use locks_inode_context helper
  lockd: use locks_inode_context helper
  ksmbd: use locks_inode_context helper
  cifs: use locks_inode_context helper
  ceph: use locks_inode_context helper
  filelock: add a new locks_inode_context accessor function
  filelock: new helper: vfs_inode_has_locks
  filelock: WARN_ON_ONCE when ->fl_file and filp don't match
 2022-12-12 08:52:53 -08:00
Akinobu Mita
2e41f274f9 libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value 
Patch series "fix error when writing negative value to simple attribute
files".

The simple attribute files do not accept a negative value since the commit
488dac0c92 ("libfs: fix error cast of negative value in
simple_attr_write()"), but some attribute files want to accept a negative
value.


This patch (of 3):

The simple attribute files do not accept a negative value since the commit
488dac0c92 ("libfs: fix error cast of negative value in
simple_attr_write()"), so we have to use a 64-bit value to write a
negative value.

This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value.

Link: https://lkml.kernel.org/r/20220919172418.45257-1-akinobu.mita@gmail.com
Link: https://lkml.kernel.org/r/20220919172418.45257-2-akinobu.mita@gmail.com
Fixes: 488dac0c92 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-11-30 16:13:16 -08:00
Jeff Layton
401a8b8fd5 filelock: add a new locks_inode_context accessor function 
There are a number of places in the kernel that are accessing the
inode->i_flctx field without smp_load_acquire. This is required to
ensure that the caller doesn't see a partially-initialized structure.

Add a new accessor function for it to make this clear and convert all of
the relevant accesses in locks.c to use it. Also, convert
locks_free_lock_context to use the helper as well instead of just doing
a "bare" assignment.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
 2022-11-30 05:08:10 -05:00
Jeff Layton
ab1ddef98a filelock: new helper: vfs_inode_has_locks 
Ceph has a need to know whether a particular inode has any locks set on
it. It's currently tracking that by a num_locks field in its
filp->private_data, but that's problematic as it tries to decrement this
field when releasing locks and that can race with the file being torn
down.

Add a new vfs_inode_has_locks helper that just returns whether any locks
are currently held on the inode.

Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
 2022-11-30 05:06:06 -05:00
Zhen Lei
ea258f159d get rid of INT_LIMIT, use type_max() instead 
INT_LIMIT() tries to do what type_max() does, except that type_max()
doesn't rely upon undefined behaviour[*], might as well use type_max()
instead.

[*] if T is an N-bit signed integer type, the maximal value in T is
pow(2, N - 1) - 1, all right, but naive expression for that value
ends up with a couple of wraparounds and as usual for wraparounds
in signed types, that's an undefined behaviour.  type_max() takes
care to avoid those...

Caught-by: UBSAN
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2022-11-25 15:43:39 -05:00
Amir Goldstein
10bc8e4af6 vfs: fix copy_file_range() averts filesystem freeze protection 
Commit 868f9f2f8e ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().

To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.

Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.

Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.

This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.

Fixes: 868f9f2f8e ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2022-11-25 00:52:28 -05:00
Christian Brauner
8d84e39d76
fs: use consistent setgid checks in is_sxid() 
Now that we made the VFS setgid checking consistent an inode can't be
marked security irrelevant even if the setgid bit is still set. Make
this function consistent with all other helpers.

Note that enforcing consistent setgid stripping checks for file
modification and mode- and ownership changes will cause the setgid bit
to be lost in more cases than useed to be the case. If an unprivileged
user wrote to a non-executable setgid file that they don't have
privilege over the setgid bit will be dropped. This will lead to
temporary failures in some xfstests until they have been updated.

Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-11-24 18:07:01 +01:00
Christian Brauner
256c8aed2b
fs: introduce dedicated idmap type for mounts 
Last cycle we've already made the interaction with idmapped mounts more
robust and type safe by introducing the vfs{g,u}id_t type. This cycle we
concluded the conversion and removed the legacy helpers.

Currently we still pass around the plain namespace that was attached to
a mount. This is in general pretty convenient but it makes it easy to
conflate filesystem and mount namespaces and what different roles they
have to play. Especially for filesystem developers without much
experience in this area this is an easy source for bugs.

Instead of passing the plain namespace we introduce a dedicated type
struct mnt_idmap and replace the pointer with a pointer to a struct
mnt_idmap. There are no semantic or size changes for the mount struct
caused by this.

We then start converting all places aware of idmapped mounts to rely on
struct mnt_idmap. Once the conversion is done all helpers down to the
really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a
struct mnt_idmap argument instead of two namespace arguments. This way
it becomes impossible to conflate the two, removing and thus eliminating
the possibility of any bugs. Fwiw, I fixed some issues in that area a
while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level
code can ultimately use the associated namespace for any permission
checks. Even most of the vfs can be ultimately completely oblivious
about this and filesystems will never interact with it directly in any
form in the future.

A struct mnt_idmap currently encompasses a simple refcount and a pointer
to the relevant namespace the mount is idmapped to. If a mount isn't
idmapped then it will point to a static nop_mnt_idmap. If it is an
idmapped mount it will point to a new struct mnt_idmap. As usual there
are no allocations or anything happening for non-idmapped mounts.
Everthing is carefully written to be a nop for non-idmapped mounts as
has always been the case.

If an idmapped mount or mount tree is created a new struct mnt_idmap is
allocated and a reference taken on the relevant namespace. For each
mount in a mount tree that gets idmapped or a mount that inherits the
idmap when it is cloned the reference count on the associated struct
mnt_idmap is bumped. Just a reminder that we only allow a mount to
change it's idmapping a single time and only if it hasn't already been
attached to the filesystems and has no active writers.

The actual changes are fairly straightforward. This will have huge
benefits for maintenance and security in the long run even if it causes
some churn. I'm aware that there's some cost for all of you. And I'll
commit to doing this work and make this as painless as I can.

Note that this also makes it possible to extend struct mount_idmap in
the future. For example, it would be possible to place the namespace
pointer in an anonymous union together with an idmapping struct. This
would allow us to expose an api to userspace that would let it specify
idmappings directly instead of having to go through the detour of
setting up namespaces at all.

This just adds the infrastructure and doesn't do any conversions.

Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-10-31 17:47:42 +01:00
Christian Brauner
e4236f9768
Merge branch 'fs.vfsuid.conversion' into for-next 2022-10-26 10:10:09 +02:00
Christian Brauner
eb7718cdb7
fs: remove unused idmapping helpers 
Now that all places can deal with the new type safe helpers remove all
of the old helpers.

Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-10-26 10:03:34 +02:00
Christian Brauner
03fd1402bd
Merge branch 'fs.acl.rework' into for-next 2022-10-24 16:43:21 +02:00
Christian Brauner
7420332a6f
fs: add new get acl method 
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on the old get
acl inode operation to retrieve posix acl and need to implement their
own custom handlers because of that.

In a previous patch we renamed the old get acl inode operation to
->get_inode_acl(). We decided to rename it and implement a new one since
->get_inode_acl() is called generic_permission() and inode_permission()
both of which can be called during an filesystem's ->permission()
handler. So simply passing a dentry argument to ->get_acl() would have
amounted to also having to pass a dentry argument to ->permission(). We
avoided that change.

This adds a new ->get_acl() inode operations which takes a dentry
argument which filesystems such as 9p, cifs, and overlayfs can implement
to get posix acls.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-10-20 10:13:27 +02:00
Christian Brauner
cac2f8b8d8
fs: rename current get acl method 
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:

acl_permission_check()
-> check_acl()
   -> get_acl()

which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.

So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().

This is intended to be a non-functional change.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-10-20 10:13:27 +02:00
Christian Brauner
138060ba92
fs: pass dentry to set acl method 
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.

Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().

As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-10-19 12:55:42 +02:00
Christian Brauner
ed5a7047d2
attr: use consistent sgid stripping checks 
Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.

But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):

echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k

The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:

sys_fallocate()
-> vfs_fallocate()
   -> xfs_file_fallocate()
      -> file_modified()
         -> __file_remove_privs()
            -> dentry_needs_remove_privs()
               -> should_remove_suid()
            -> __remove_privs()
               newattrs.ia_valid = ATTR_FORCE | kill;
               -> notify_change()
                  -> setattr_copy()

In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.

But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.

So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:

ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);

which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:

if (ia_valid & ATTR_MODE) {
        umode_t mode = attr->ia_mode;
        vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
        if (!vfsgid_in_group_p(vfsgid) &&
            !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
                mode &= ~S_ISGID;
        inode->i_mode = mode;
}

and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.

But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.

If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:

sys_fallocate()
-> vfs_fallocate()
   -> ovl_fallocate()
      -> file_remove_privs()
         -> dentry_needs_remove_privs()
            -> should_remove_suid()
         -> __remove_privs()
            newattrs.ia_valid = ATTR_FORCE | kill;
            -> notify_change()
               -> ovl_setattr()
                  // TAKE ON MOUNTER'S CREDS
                  -> ovl_do_notify_change()
                     -> notify_change()
                  // GIVE UP MOUNTER'S CREDS
     // TAKE ON MOUNTER'S CREDS
     -> vfs_fallocate()
        -> xfs_file_fallocate()
           -> file_modified()
              -> __file_remove_privs()
                 -> dentry_needs_remove_privs()
                    -> should_remove_suid()
                 -> __remove_privs()
                    newattrs.ia_valid = attr_force | kill;
                    -> notify_change()

The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.

While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.

Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-10-18 10:09:47 +02:00
Linus Torvalds
f721d24e5d tmpfile API change 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY0DP2AAKCRBZ7Krx/gZQ
 6/+qAQCEGQWpcC5MB17zylaX7gqzhgAsDrwtpevlno3aIv/1pQD/YWr/E8tf7WTW
 ERXRXMRx1cAzBJhUhVgIY+3ANfU2Rg4=
 =cko4
 -----END PGP SIGNATURE-----

Merge tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs tmpfile updates from Al Viro:
 "Miklos' ->tmpfile() signature change; pass an unopened struct file to
  it, let it open the damn thing. Allows to add tmpfile support to FUSE"

* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fuse: implement ->tmpfile()
  vfs: open inside ->tmpfile()
  vfs: move open right after ->tmpfile()
  vfs: make vfs_tmpfile() static
  ovl: use vfs_tmpfile_open() helper
  cachefiles: use vfs_tmpfile_open() helper
  cachefiles: only pass inode to *mark_inode_inuse() helpers
  cachefiles: tmpfile error handling cleanup
  hugetlbfs: cleanup mknod and tmpfile
  vfs: add vfs_tmpfile_open() helper
 2022-10-10 19:45:17 -07:00
Linus Torvalds
0a78a376ef for-6.1/io_uring-2022-10-03 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmM67S0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgppnPEACkBzilBLKwT9MWdUAITwyrMXsAa1R9gsR9
 Tb3Xs+mNO2meuycLAUh4LIbb28NNr7/S5rwWet5NRZ71hgv4Q/WA/0EemAGGXYqd
 +3MEBAWU3FBFkC/cJXCnT8F5yCXYRkT5n/hzCSNEpNKjQ5JnAhHDlWAjgzZRuD/A
 A+YJjoBVJJuI1wY4I5XCpeQXEmg/Wc1MgXfyHgWVtGKnYrrxibiCnBZnqbAMZNvD
 hGn1Vl02ooamGTFm/nW/OAt71DtqsjWUCVOHKmlZ+zBUjbUj6FMXmPVV7vCV9o2w
 PT4Dx3CTc2iXwa8KfEFNPvXBzy0Qfu8edweP/MvZHWHVZREpEAh4cG6GhwW8whD+
 5mPisqmRjZKe0BBS4k/wKN1RXEypSQoTU4EdljfbQPU/usn35lmjMmEXXgs3IhqM
 fcTdO5ZUOp+CGyzI0Bc7UtS8vilJbX9ynN8G80MUUAZzuQg39MH7lNQYSJSSvJfU
 OlvzmL3lhRLYM1s/KKiZzdDBoMvC7R4oHmzCveOjQTMIHf6WNyqKFlrWScq2wzpN
 oRxqt0xiVQ3PFMmFj6N08f145qtbASuF3sKv7dbU3QXTsCAos3wdTdX+PejYApEZ
 W3dr0TDjNBicLNVPiSj132p0ZRtdZvLGuGVkBD4GPQeH2NwswxMHQAfz8e2lqmA4
 9bWG6BM7Yw==
 =m9kX
 -----END PGP SIGNATURE-----

Merge tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux

Pull io_uring updates from Jens Axboe:

 - Add supported for more directly managed task_work running.

   This is beneficial for real world applications that end up issuing
   lots of system calls as part of handling work. Normal task_work will
   always execute as we transition in and out of the kernel, even for
   "unrelated" system calls. It's more efficient to defer the handling
   of io_uring's deferred work until the application wants it to be run,
   generally in batches.

   As part of ongoing work to write an io_uring network backend for
   Thrift, this has been shown to greatly improve performance. (Dylan)

 - Add IOPOLL support for passthrough (Kanchan)

 - Improvements and fixes to the send zero-copy support (Pavel)

 - Partial IO handling fixes (Pavel)

 - CQE ordering fixes around CQ ring overflow (Pavel)

 - Support sendto() for non-zc as well (Pavel)

 - Support sendmsg for zerocopy (Pavel)

 - Networking iov_iter fix (Stefan)

 - Misc fixes and cleanups (Pavel, me)

* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
  io_uring/net: fix notif cqe reordering
  io_uring/net: don't update msg_name if not provided
  io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
  io_uring/rw: defer fsnotify calls to task context
  io_uring/net: fix fast_iov assignment in io_setup_async_msg()
  io_uring/net: fix non-zc send with address
  io_uring/net: don't skip notifs for failed requests
  io_uring/rw: don't lose short results on io_setup_async_rw()
  io_uring/rw: fix unexpected link breakage
  io_uring/net: fix cleanup double free free_iov init
  io_uring: fix CQE reordering
  io_uring/net: fix UAF in io_sendrecv_fail()
  selftest/net: adjust io_uring sendzc notif handling
  io_uring: ensure local task_work marks task as running
  io_uring/net: zerocopy sendmsg
  io_uring/net: combine fail handlers
  io_uring/net: rename io_sendzc()
  io_uring/net: support non-zerocopy sendto
  io_uring/net: refactor io_setup_async_addr
  io_uring/net: don't lose partial send_zc on fail
  ...
 2022-10-07 08:52:43 -07:00
Linus Torvalds
bc32a6330f The first two changes that involve files outside of fs/ext4: 
- submit_bh() can never return an error, so change it to return void,
   and remove the unused checks from its callers
 
 - fix I_DIRTY_TIME handling so it will be set even if the inode
   already has I_DIRTY_INODE
 
 Performance:
 
 - Always enable i_version counter (as btrfs and xfs already do).
   Remove some uneeded i_version bumps to avoid unnecessary nfs cache
   invalidations.
 
 - Wake up journal waters in FIFO order, to avoid some journal users
   from not getting a journal handle for an unfairly long time.
 
 - In ext4_write_begin() allocate any necessary buffer heads before
   starting the journal handle.
 
 - Don't try to prefetch the block allocation bitmaps for a read-only
   file system.
 
 Bug Fixes:
 
 - Fix a number of fast commit bugs, including resources leaks and out
   of bound references in various error handling paths and/or if the fast
   commit log is corrupted.
 
 - Avoid stopping the online resize early when expanding a file system
   which is less than 16TiB to a size greater than 16TiB.
 
 - Fix apparent metadata corruption caused by a race with a metadata
   buffer head getting migrated while it was trying to be read.
 
 - Mark the lazy initialization thread freezable to prevent suspend
   failures.
 
 - Other miscellaneous bug fixes.
 
 Cleanups:
 
 - Break up the incredibly long ext4_full_super() function by
   refactoring to move code into more understandable, smaller
   functions.
 
 - Remove the deprecated (and ignored) noacl and nouser_attr mount
   option.
 
 - Factor out some common code in fast commit handling.
 
 - Other miscellaneous cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmM8/2gACgkQ8vlZVpUN
 gaPohAf9GDMUq3QIYoWLlJ+ygJhL0xQGPfC6sypMjHaUO5GSo+1+sAMU3JBftxUS
 LrgTtmzSKzwp9PyOHNs+mswUzhLZivKVCLMmOznQUZS228GSVKProhN1LPL4UP2Q
 Ks8i1M5XTWS+mtJ5J5Mw6jRHxcjfT6ynyJKPnIWKTwXyeru1WSJ2PWqtWQD4EZkE
 lImECy0jX/zlK02s0jDYbNIbXIvI/TTYi7wT8o1ouLCAXMDv5gJRc5TXCVtX8i59
 /Pl9rGG/+IWTnYT/aQ668S2g0Cz6Wyv2EkmiPUW0Y8NoLaaouBYZoC2hDujiv+l1
 ucEI14TEQ+DojJTdChrtwKqgZfqDOw==
 =xoLC
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "The first two changes involve files outside of fs/ext4:

   - submit_bh() can never return an error, so change it to return void,
     and remove the unused checks from its callers

   - fix I_DIRTY_TIME handling so it will be set even if the inode
     already has I_DIRTY_INODE

  Performance:

   - Always enable i_version counter (as btrfs and xfs already do).
     Remove some uneeded i_version bumps to avoid unnecessary nfs cache
     invalidations

   - Wake up journal waiters in FIFO order, to avoid some journal users
     from not getting a journal handle for an unfairly long time

   - In ext4_write_begin() allocate any necessary buffer heads before
     starting the journal handle

   - Don't try to prefetch the block allocation bitmaps for a read-only
     file system

  Bug Fixes:

   - Fix a number of fast commit bugs, including resources leaks and out
     of bound references in various error handling paths and/or if the
     fast commit log is corrupted

   - Avoid stopping the online resize early when expanding a file system
     which is less than 16TiB to a size greater than 16TiB

   - Fix apparent metadata corruption caused by a race with a metadata
     buffer head getting migrated while it was trying to be read

   - Mark the lazy initialization thread freezable to prevent suspend
     failures

   - Other miscellaneous bug fixes

  Cleanups:

   - Break up the incredibly long ext4_full_super() function by
     refactoring to move code into more understandable, smaller
     functions

   - Remove the deprecated (and ignored) noacl and nouser_attr mount
     option

   - Factor out some common code in fast commit handling

   - Other miscellaneous cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (53 commits)
  ext4: fix potential out of bound read in ext4_fc_replay_scan()
  ext4: factor out ext4_fc_get_tl()
  ext4: introduce EXT4_FC_TAG_BASE_LEN helper
  ext4: factor out ext4_free_ext_path()
  ext4: remove unnecessary drop path references in mext_check_coverage()
  ext4: update 'state->fc_regions_size' after successful memory allocation
  ext4: fix potential memory leak in ext4_fc_record_regions()
  ext4: fix potential memory leak in ext4_fc_record_modified_inode()
  ext4: remove redundant checking in ext4_ioctl_checkpoint
  jbd2: add miss release buffer head in fc_do_one_pass()
  ext4: move DIOREAD_NOLOCK setting to ext4_set_def_opts()
  ext4: remove useless local variable 'blocksize'
  ext4: unify the ext4 super block loading operation
  ext4: factor out ext4_journal_data_mode_check()
  ext4: factor out ext4_load_and_init_journal()
  ext4: factor out ext4_group_desc_init() and ext4_group_desc_free()
  ext4: factor out ext4_geometry_check()
  ext4: factor out ext4_check_feature_compatibility()
  ext4: factor out ext4_init_metadata_csum()
  ext4: factor out ext4_encoding_init()
  ...
 2022-10-06 17:45:53 -07:00
Linus Torvalds
7a3353c5c4 struct file-related stuff 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYzxjIQAKCRBZ7Krx/gZQ
 6/FPAQCNCZygQzd+54//vo4kTwv5T2Bv3hS8J51rASPJT87/BQD/TfCLS5urt/Gt
 81A1dFOfnTXseofuBKyGSXwQm0dWpgA=
 =PLre
 -----END PGP SIGNATURE-----

Merge tag 'pull-file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs file updates from Al Viro:
 "struct file-related stuff"

* tag 'pull-file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  dma_buf_getfile(): don't bother with ->f_flags reassignments
  Change calling conventions for filldir_t
  locks: fix TOCTOU race when granting write lease
 2022-10-06 17:13:18 -07:00
Lukas Czerner
cbfecb927f fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE 
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME.  That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.

The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.

Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.

Thanks Jan Kara for suggestions on how to make this work properly.

Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
 2022-09-29 23:02:00 -04:00
Miklos Szeredi
863f144f12 vfs: open inside ->tmpfile() 
This is in preparation for adding tmpfile support to fuse, which requires
that the tmpfile creation and opening are done as a single operation.

Replace the 'struct dentry *' argument of i_op->tmpfile with
'struct file *'.

Call finish_open_simple() as the last thing in ->tmpfile() instances (may
be omitted in the error case).

Change d_tmpfile() argument to 'struct file *' as well to make callers more
readable.

Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
 2022-09-24 07:00:00 +02:00
Miklos Szeredi
9751b33865 vfs: move open right after ->tmpfile() 
Create a helper finish_open_simple() that opens the file with the original
dentry.  Handle the error case here as well to simplify callers.

Call this helper right after ->tmpfile() is called.

Next patch will change the tmpfile API and move this call into tmpfile
instances.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
 2022-09-24 07:00:00 +02:00
Miklos Szeredi
3e9d4c5935 vfs: make vfs_tmpfile() static 
No callers outside of fs/namei.c anymore.

Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
 2022-09-24 07:00:00 +02:00
Miklos Szeredi
22873deac9 vfs: add vfs_tmpfile_open() helper 
This helper unifies tmpfile creation with opening.

Existing vfs_tmpfile() callers outside of fs/namei.c will be converted to
using this helper.  There are two such callers: cachefile and overlayfs.

The cachefiles code currently uses the open_with_fake_path() helper to open
the tmpfile, presumably to disable accounting of the open file.  Overlayfs
uses tmpfile for copy_up, which means these struct file instances will be
short lived, hence it doesn't really matter if they are accounted or not.
Disable accounting in this helper too, which should be okay for both
callers.

Add MAY_OPEN permission checking for consistency.  Like for create(2)
read/write permissions are not checked.

Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
 2022-09-24 06:59:59 +02:00
Eric Biggers
d7e7b9af10 fscrypt: stop using keyrings subsystem for fscrypt_master_key 
The approach of fs/crypto/ internally managing the fscrypt_master_key
structs as the payloads of "struct key" objects contained in a
"struct key" keyring has outlived its usefulness.  The original idea was
to simplify the code by reusing code from the keyrings subsystem.
However, several issues have arisen that can't easily be resolved:

- When a master key struct is destroyed, blk_crypto_evict_key() must be
  called on any per-mode keys embedded in it.  (This started being the
  case when inline encryption support was added.)  Yet, the keyrings
  subsystem can arbitrarily delay the destruction of keys, even past the
  time the filesystem was unmounted.  Therefore, currently there is no
  easy way to call blk_crypto_evict_key() when a master key is
  destroyed.  Currently, this is worked around by holding an extra
  reference to the filesystem's request_queue(s).  But it was overlooked
  that the request_queue reference is *not* guaranteed to pin the
  corresponding blk_crypto_profile too; for device-mapper devices that
  support inline crypto, it doesn't.  This can cause a use-after-free.

- When the last inode that was using an incompletely-removed master key
  is evicted, the master key removal is completed by removing the key
  struct from the keyring.  Currently this is done via key_invalidate().
  Yet, key_invalidate() takes the key semaphore.  This can deadlock when
  called from the shrinker, since in fscrypt_ioctl_add_key(), memory is
  allocated with GFP_KERNEL under the same semaphore.

- More generally, the fact that the keyrings subsystem can arbitrarily
  delay the destruction of keys (via garbage collection delay, or via
  random processes getting temporary key references) is undesirable, as
  it means we can't strictly guarantee that all secrets are ever wiped.

- Doing the master key lookups via the keyrings subsystem results in the
  key_permission LSM hook being called.  fscrypt doesn't want this, as
  all access control for encrypted files is designed to happen via the
  files themselves, like any other files.  The workaround which SELinux
  users are using is to change their SELinux policy to grant key search
  access to all domains.  This works, but it is an odd extra step that
  shouldn't really have to be done.

The fix for all these issues is to change the implementation to what I
should have done originally: don't use the keyrings subsystem to keep
track of the filesystem's fscrypt_master_key structs.  Instead, just
store them in a regular kernel data structure, and rework the reference
counting, locking, and lifetime accordingly.  Retain support for
RCU-mode key lookups by using a hash table.  Replace fscrypt_sb_free()
with fscrypt_sb_delete(), which releases the keys synchronously and runs
a bit earlier during unmount, so that block devices are still available.

A side effect of this patch is that neither the master keys themselves
nor the filesystem keyrings will be listed in /proc/keys anymore.
("Master key users" and the master key users keyrings will still be
listed.)  However, this was mostly an implementation detail, and it was
intended just for debugging purposes.  I don't know of anyone using it.

This patch does *not* change how "master key users" (->mk_users) works;
that still uses the keyrings subsystem.  That is still needed for key
quotas, and changing that isn't necessary to solve the issues listed
above.  If we decide to change that too, it would be a separate patch.

I've marked this as fixing the original commit that added the fscrypt
keyring, but as noted above the most important issue that this patch
fixes wasn't introduced until the addition of inline encryption support.

Fixes: 22d94f493b ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-2-ebiggers@kernel.org
 2022-09-21 20:33:06 -07:00
Jens Axboe
de97fcb303 fs: add batch and poll flags to the uring_cmd_iopoll() handler 
We need the poll_flags to know how to poll for the IO, and we should
have the batch structure in preparation for supporting batched
completions with iopoll.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2022-09-21 10:30:43 -06:00
Kanchan Joshi
de27e18e86 fs: add file_operations->uring_cmd_iopoll 
io_uring will invoke this to do completion polling on uring-cmd
operations.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220823161443.49436-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2022-09-21 10:30:42 -06:00
Al Viro
25885a35a7 Change calling conventions for filldir_t 
filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop".  Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).

So let's just return bool ("should we keep going?") - it's less confusing
that way.  The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
	do something for everything in directory, until we run into problem
and
	find an entry in directory and do something to it.

The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.

"true means stop" would be more natural for the second group; "true
means keep going" - for the first one.  I tried both variants and
the things like
	if allocation failed
		something = -ENOMEM;
		return true;
just looked unnatural and asking for trouble.

[folded suggestion from Matthew Wilcox <willy@infradead.org>]
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2022-08-17 17:25:04 -04:00
Linus Torvalds
1da8cf961b io_uring-6.0-2022-08-13 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmL3+fQQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpmXyEACfERdKYdZ/W3IvPoyK8CJ3p7f/6SOj2/p1
 DTuaa3l7/kVq2HcRUGgZwvgeWpOCFghdBm5co/4hGqSw7bT8rERGDelo41ohhTfr
 xKIiwJflK/s280VXLJFA+o7Jeoj1oTFYCmdUmU3wcKFVnQdu1rz9s0L6bwsEqq93
 y1uty96dxYZn2mENLbBah0x9yV0h2ZxRkguUm0sdnKl/tMkUVLSD1TPLHf2s6eAL
 o3Dbmo9jv4HFXoJj8YL50Oxl22zIKBHl9hZqHdLcKesFgyFTChckKUNijWyPL2vE
 zesbnd57sXgY6ghi4LDGeCOtN41WNjiVeAm/c4XK5oFhTag8Q2x0D1hTPUByHksl
 IV/116xs6pHTeZRhNlMOBVMZGLSz95zSuRUyTONAmKgc/b3if/w3zTi1W3CnJSlx
 7O5GpqQDZTQuin0jldNKImbx1aPAATb+UWDkl7O5aXkjw4FUtxT5GrYcBNswVuKX
 iybx8NyVn8kFD1hix3U8huBOPSg1JMkR+sFml+NqYRd4i2CwV8KAPPuzsPw6MRBL
 U4DfkAkpsbKqSK+mri5aUrYxmpYkJ45mgyldiewiOso9+AYg9DDp3D2iGgAiRbKm
 i3pz1Gh/3iUow0UAI5ZFlDhjHgWPlIH7IBbemivhjhFV4GrXJqTwUzsA1iDKTe14
 3lHKkAPVPA==
 =FfLf
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Regression fix for this merge window, fixing a wrong order of
   arguments for io_req_set_res() for passthru (Dylan)

 - Fix for the audit code leaking context memory (Peilin)

 - Ensure that provided buffers are memcg accounted (Pavel)

 - Correctly handle short zero-copy sends (Pavel)

 - Sparse warning fixes for the recvmsg multishot command (Dylan)

 - Error handling fix for passthru (Anuj)

 - Remove randomization of struct kiocb fields, to avoid it growing in
   size if re-arranged in such a fashion that it grows more holes or
   padding (Keith, Linus)

 - Small series improving type safety of the sqe fields (Stefan)

* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
  io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
  io_uring: make io_kiocb_to_cmd() typesafe
  fs: don't randomize struct kiocb fields
  io_uring: consistently make use of io_notif_to_data()
  io_uring: fix error handling for io_uring_cmd
  io_uring: fix io_recvmsg_prep_multishot sparse warnings
  io_uring/net: send retry for zerocopy
  io_uring: mem-account pbuf buckets
  audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
  io_uring: pass correct parameters to io_req_set_res
 2022-08-13 13:28:54 -07:00
Keith Busch
addebd9ac9 fs: don't randomize struct kiocb fields 
This is a size sensitive structure and randomizing can introduce extra
padding that breaks io_uring's fixed size expectations. There are few
fields here as it is, half of which need a fixed order to optimally
pack, so the randomization isn't providing much.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/io-uring/b6f508ca-b1b2-5f40-7998-e4cff1cf7212@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2022-08-12 17:00:35 -06:00
Linus Torvalds
426b4ca2d6 fs.setgid.v6.0 
-----BEGIN PGP SIGNATURE-----
 
 iHQEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYvIYIgAKCRCRxhvAZXjc
 omE8AQDAZG2YjNJfMnUUaaWYO3+zTaHlQp7OQkQTXIHfcfViXQD4vPt3Wxh3rrF+
 J8fwNcWmXhSNei8HP6cA06QmSajnDQ==
 =GF9/
 -----END PGP SIGNATURE-----

Merge tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull setgid updates from Christian Brauner:
 "This contains the work to move setgid stripping out of individual
  filesystems and into the VFS itself.

  Creating files that have both the S_IXGRP and S_ISGID bit raised in
  directories that themselves have the S_ISGID bit set requires
  additional privileges to avoid security issues.

  When a filesystem creates a new inode it needs to take care that the
  caller is either in the group of the newly created inode or they have
  CAP_FSETID in their current user namespace and are privileged over the
  parent directory of the new inode. If any of these two conditions is
  true then the S_ISGID bit can be raised for an S_IXGRP file and if not
  it needs to be stripped.

  However, there are several key issues with the current implementation:

   - S_ISGID stripping logic is entangled with umask stripping.

     For example, if the umask removes the S_IXGRP bit from the file
     about to be created then the S_ISGID bit will be kept.

     The inode_init_owner() helper is responsible for S_ISGID stripping
     and is called before posix_acl_create(). So we can end up with two
     different orderings:

     1. FS without POSIX ACL support

        First strip umask then strip S_ISGID in inode_init_owner().

        In other words, if a filesystem doesn't support or enable POSIX
        ACLs then umask stripping is done directly in the vfs before
        calling into the filesystem:

     2. FS with POSIX ACL support

        First strip S_ISGID in inode_init_owner() then strip umask in
        posix_acl_create().

        In other words, if the filesystem does support POSIX ACLs then
        unmask stripping may be done in the filesystem itself when
        calling posix_acl_create().

     Note that technically filesystems are free to impose their own
     ordering between posix_acl_create() and inode_init_owner() meaning
     that there's additional ordering issues that influence S_ISGID
     inheritance.

     (Note that the commit message of commit 1639a49ccd ("fs: move
     S_ISGID stripping into the vfs_*() helpers") gets the ordering
     between inode_init_owner() and posix_acl_create() the wrong way
     around. I realized this too late.)

   - Filesystems that don't rely on inode_init_owner() don't get S_ISGID
     stripping logic.

     While that may be intentional (e.g. network filesystems might just
     defer setgid stripping to a server) it is often just a security
     issue.

     Note that mandating the use of inode_init_owner() was proposed as
     an alternative solution but that wouldn't fix the ordering issues
     and there are examples such as afs where the use of
     inode_init_owner() isn't possible.

     In any case, we should also try the cleaner and generalized
     solution first before resorting to this approach.

   - We still have S_ISGID inheritance bugs years after the initial
     round of S_ISGID inheritance fixes:

       e014f37db1 ("xfs: use setattr_copy to set vfs inode attributes")
       01ea173e10 ("xfs: fix up non-directory creation in SGID directories")
       fd84bfdddd ("ceph: fix up non-directory creation in SGID directories")

  All of this led us to conclude that the current state is too messy.
  While we won't be able to make it completely clean as
  posix_acl_create() is still a filesystem specific call we can improve
  the S_SIGD stripping situation quite a bit by hoisting it out of
  inode_init_owner() and into the respective vfs creation operations.

  The obvious advantage is that we don't need to rely on individual
  filesystems getting S_ISGID stripping right and instead can
  standardize the ordering between S_ISGID and umask stripping directly
  in the VFS.

  A few short implementation notes:

   - The stripping logic needs to happen in vfs_*() helpers for the sake
     of stacking filesystems such as overlayfs that rely on these
     helpers taking care of S_ISGID stripping.

   - Security hooks have never seen the mode as it is ultimately seen by
     the filesystem because of the ordering issue we mentioned. Nothing
     is changed for them. We simply continue to strip the umask before
     passing the mode down to the security hooks.

   - The following filesystems use inode_init_owner() and thus relied on
     S_ISGID stripping: spufs, 9p, bfs, btrfs, ext2, ext4, f2fs,
     hfsplus, hugetlbfs, jfs, minix, nilfs2, ntfs3, ocfs2, omfs,
     overlayfs, ramfs, reiserfs, sysv, ubifs, udf, ufs, xfs, zonefs,
     bpf, tmpfs.

     We've audited all callchains as best as we could. More details can
     be found in the commit message to 1639a49ccd ("fs: move S_ISGID
     stripping into the vfs_*() helpers")"

* tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  ceph: rely on vfs for setgid stripping
  fs: move S_ISGID stripping into the vfs_*() helpers
  fs: Add missing umask strip in vfs_tmpfile
  fs: add mode_strip_sgid() helper
 2022-08-09 09:52:28 -07:00
Linus Torvalds
2bd5d41e0e fuse update for 6.0 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYvD4IQAKCRDh3BK/laaZ
 PDHHAP93H+2E9c6biGd5pEaL2ABChRY+wsQURzD+SZ6AL3JaUQD+KHxA4q0MJvws
 L6CWcf2XptUDCLe3P6sgSTvv5Gk1OAM=
 =FoXF
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

 - Fix an issue with reusing the bdi in case of block based filesystems

 - Allow root (in init namespace) to access fuse filesystems in user
   namespaces if expicitly enabled with a module param

 - Misc fixes

* tag 'fuse-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: retire block-device-based superblock on force unmount
  vfs: function to prevent re-use of block-device-based superblocks
  virtio_fs: Modify format for virtio_fs_direct_access
  virtiofs: delete unused parameter for virtio_fs_cleanup_vqs
  fuse: Add module param for CAP_SYS_ADMIN access bypassing allow_other
  fuse: Remove the control interface for virtio-fs
  fuse: ioctl: translate ENOSYS
  fuse: limit nsec
  fuse: avoid unnecessary spinlock bump
  fuse: fix deadlock between atomic O_TRUNC and page invalidation
  fuse: write inode in fuse_release()
 2022-08-08 11:10:02 -07:00
Linus Torvalds
6614a3c316 - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe 
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
 
 - Some kmemleak fixes from Patrick Wang and Waiman Long
 
 - DAMON updates from SeongJae Park
 
 - memcg debug/visibility work from Roman Gushchin
 
 - vmalloc speedup from Uladzislau Rezki
 
 - more folio conversion work from Matthew Wilcox
 
 - enhancements for coherent device memory mapping from Alex Sierra
 
 - addition of shared pages tracking and CoW support for fsdax, from
   Shiyang Ruan
 
 - hugetlb optimizations from Mike Kravetz
 
 - Mel Gorman has contributed some pagealloc changes to improve latency
   and realtime behaviour.
 
 - mprotect soft-dirty checking has been improved by Peter Xu
 
 - Many other singleton patches all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
 jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
 SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
 =w/UH
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:
 "Most of the MM queue. A few things are still pending.

  Liam's maple tree rework didn't make it. This has resulted in a few
  other minor patch series being held over for next time.

  Multi-gen LRU still isn't merged as we were waiting for mapletree to
  stabilize. The current plan is to merge MGLRU into -mm soon and to
  later reintroduce mapletree, with a view to hopefully getting both
  into 6.1-rc1.

  Summary:

   - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
     Lin, Yang Shi, Anshuman Khandual and Mike Rapoport

   - Some kmemleak fixes from Patrick Wang and Waiman Long

   - DAMON updates from SeongJae Park

   - memcg debug/visibility work from Roman Gushchin

   - vmalloc speedup from Uladzislau Rezki

   - more folio conversion work from Matthew Wilcox

   - enhancements for coherent device memory mapping from Alex Sierra

   - addition of shared pages tracking and CoW support for fsdax, from
     Shiyang Ruan

   - hugetlb optimizations from Mike Kravetz

   - Mel Gorman has contributed some pagealloc changes to improve
     latency and realtime behaviour.

   - mprotect soft-dirty checking has been improved by Peter Xu

   - Many other singleton patches all over the place"

 [ XFS merge from hell as per Darrick Wong in

   https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]

* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
  tools/testing/selftests/vm/hmm-tests.c: fix build
  mm: Kconfig: fix typo
  mm: memory-failure: convert to pr_fmt()
  mm: use is_zone_movable_page() helper
  hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
  hugetlbfs: cleanup some comments in inode.c
  hugetlbfs: remove unneeded header file
  hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
  hugetlbfs: use helper macro SZ_1{K,M}
  mm: cleanup is_highmem()
  mm/hmm: add a test for cross device private faults
  selftests: add soft-dirty into run_vmtests.sh
  selftests: soft-dirty: add test for mprotect
  mm/mprotect: fix soft-dirty check in can_change_pte_writable()
  mm: memcontrol: fix potential oom_lock recursion deadlock
  mm/gup.c: fix formatting in check_and_migrate_movable_page()
  xfs: fail dax mount if reflink is enabled on a partition
  mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
  userfaultfd: don't fail on unrecognized features
  hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
  ...
 2022-08-05 16:32:45 -07:00
Linus Torvalds
5264406cdb iov_iter work, part 1 - isolated cleanups and optimizations. 
One of the goals is to reduce the overhead of using ->read_iter()
 and ->write_iter() instead of ->read()/->write(); new_sync_{read,write}()
 has a surprising amount of overhead, in particular inside iocb_flags().
 That's why the beginning of the series is in this pile; it's not directly
 iov_iter-related, but it's a part of the same work...
 
 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurGOQAKCRBZ7Krx/gZQ
 6ysyAP91lvBfMRepcxpd9kvtuzWkU8A3rfSziZZteEHANB9Q7QEAiPn2a2OjWkcZ
 uAyUWfCkHCNx+dSMkEvUgR5okQ0exAM=
 =9UCV
 -----END PGP SIGNATURE-----

Merge tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs iov_iter updates from Al Viro:
 "Part 1 - isolated cleanups and optimizations.

  One of the goals is to reduce the overhead of using ->read_iter() and
  ->write_iter() instead of ->read()/->write().

  new_sync_{read,write}() has a surprising amount of overhead, in
  particular inside iocb_flags(). That's the explanation for the
  beginning of the series is in this pile; it's not directly
  iov_iter-related, but it's a part of the same work..."

* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  first_iovec_segment(): just return address
  iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
  iov_iter: first_{iovec,bvec}_segment() - simplify a bit
  iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
  iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
  iov_iter_bvec_advance(): don't bother with bvec_iter
  copy_page_{to,from}_iter(): switch iovec variants to generic
  keep iocb_flags() result cached in struct file
  iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
  struct file: use anonymous union member for rcuhead and llist
  btrfs: use IOMAP_DIO_NOSYNC
  teach iomap_dio_rw() to suppress dsync
  No need of likely/unlikely on calls of check_copy_size()
 2022-08-03 13:50:22 -07:00
Linus Torvalds
a782e86649 Saner handling of "lseek should fail with ESPIPE" - gets rid of 
magical no_llseek thing and makes checks consistent.  In particular,
 ad-hoc "can we do splice via internal pipe" checks got saner (and
 somewhat more permissive, which is what Jason had been after, AFAICT)
 
 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYug2xgAKCRBZ7Krx/gZQ
 6wxWAQDqeg+xMq2FGPXmgjCa+Cp3PXH96Lp6f3hHzakIDx+t8gEAxvuiXAD22Mct
 6S1SKuGj0iDIuM4L7hUiWTiY/bDXSAc=
 =3EC/
 -----END PGP SIGNATURE-----

Merge tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs lseek updates from Al Viro:
 "Jason's lseek series.

  Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
  the magical no_llseek thing and makes checks consistent.

  In particular, the ad-hoc "can we do splice via internal pipe" checks
  got saner (and somewhat more permissive, which is what Jason had been
  after, AFAICT)"

* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: remove no_llseek
  fs: check FMODE_LSEEK to control internal pipe splicing
  vfio: do not set FMODE_LSEEK flag
  dma-buf: remove useless FMODE_LSEEK flag
  fs: do not compare against ->llseek
  fs: clear or set FMODE_LSEEK based on llseek function
 2022-08-03 11:35:20 -07:00
Linus Torvalds
f00654007f Folio changes for 6.0 
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
    when running xfstests
 
  - Convert more of mpage to use folios
 
  - Remove add_to_page_cache() and add_to_page_cache_locked()
 
  - Convert find_get_pages_range() to filemap_get_folios()
 
  - Improvements to the read_cache_page() family of functions
 
  - Remove a few unnecessary checks of PageError
 
  - Some straightforward filesystem conversions to use folios
 
  - Split PageMovable users out from address_space_operations into their
    own movable_operations
 
  - Convert aops->migratepage to aops->migrate_folio
 
  - Remove nobh support (Christoph Hellwig)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
 gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
 mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
 7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
 /58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
 C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
 Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
 =DgUi
 -----END PGP SIGNATURE-----

Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache

Pull folio updates from Matthew Wilcox:

 - Fix an accounting bug that made NR_FILE_DIRTY grow without limit
   when running xfstests

 - Convert more of mpage to use folios

 - Remove add_to_page_cache() and add_to_page_cache_locked()

 - Convert find_get_pages_range() to filemap_get_folios()

 - Improvements to the read_cache_page() family of functions

 - Remove a few unnecessary checks of PageError

 - Some straightforward filesystem conversions to use folios

 - Split PageMovable users out from address_space_operations into
   their own movable_operations

 - Convert aops->migratepage to aops->migrate_folio

 - Remove nobh support (Christoph Hellwig)

* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
  fs: remove the NULL get_block case in mpage_writepages
  fs: don't call ->writepage from __mpage_writepage
  fs: remove the nobh helpers
  jfs: stop using the nobh helper
  ext2: remove nobh support
  ntfs3: refactor ntfs_writepages
  mm/folio-compat: Remove migration compatibility functions
  fs: Remove aops->migratepage()
  secretmem: Convert to migrate_folio
  hugetlb: Convert to migrate_folio
  aio: Convert to migrate_folio
  f2fs: Convert to filemap_migrate_folio()
  ubifs: Convert to filemap_migrate_folio()
  btrfs: Convert btrfs_migratepage to migrate_folio
  mm/migrate: Add filemap_migrate_folio()
  mm/migrate: Convert migrate_page() to migrate_folio()
  nfs: Convert to migrate_folio
  btrfs: Convert btree_migratepage to migrate_folio
  mm/migrate: Convert expected_page_refs() to folio_expected_refs()
  mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
  ...
 2022-08-03 10:35:43 -07:00
Linus Torvalds
98e2474640 for-5.20/io_uring-buffered-writes-2022-07-29 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLkm7UQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpldTEADTg/96R+eq78UZBNZmdifY9/qwQD+kzNiK
 ACDoYZFSbWUjMeOWqRxbYr6mXBKHnGHyTGlraTTpLDzhpB1xwoWfgOK9uOYXW/Ik
 eWfgTujPW/8v/l/z86khE+GH9b/maGCRqNZgS6uLVLzhxG6oCkoYTyOh1iHaF1VM
 Rma4nbJ8GSEDtiXNDl0Bznnyks/pzwoz/9slwzZ7PxtFwZsBxKuxgMUR5HIXdRp7
 5iUoFJhZrGWyi/dbQZUsK/9VYVVnKkcBCz2pb4GEmC+3dS/vlPEoeWUpPHInNyd1
 9NB9v8c+KFmQaWnCxuxcdHvCfmRRQrX8Pr8/OBNZKO6McYrKWKA+lurp4EGClE3m
 cZdK+P/9FS/Eeua8hum9UnbPAqsJPqLTbpbrySeBdd4iFA6u7rRqDX2+nz3PNe9U
 1b7V1bWBIEY/Rsw/PKo59oIeV0auD8v9OCHJ0lF2pv6dRln2/W0y1Qfd1DI18xFG
 +9bBnQzhF7R0O8UP5ApVayQCYrd906YsSVUOqAiLmUs/BoOgRq6g/0BqSOVVKE2u
 5iq8zTsVMkxY0ZpExwZST/700JwkPIV4SVPEYRC6QssFTcylvlisIek6XYSS9HX4
 Z6gzMwJW1H47bEfG4JolTI8uBjp0hQLCPX0O0XFLVnbHQwN0kjIBmv3axAwJO2NV
 qrrHXjf09w==
 =hV7G
 -----END PGP SIGNATURE-----

Merge tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block

Pull io_uring buffered writes support from Jens Axboe:
 "This contains support for buffered writes, specifically for XFS. btrfs
  is in progress, will be coming in the next release.

  io_uring does support buffered writes on any file type, but since the
  buffered write path just always -EAGAIN (or -EOPNOTSUPP) any attempt
  to do so if IOCB_NOWAIT is set, any buffered write will effectively be
  handled by io-wq offload. This isn't very efficient, and we even have
  specific code in io-wq to serialize buffered writes to the same inode
  to avoid further inefficiencies with thread offload.

  This is particularly sad since most buffered writes don't block, they
  simply copy data to a page and dirty it. With this pull request, we
  can handle buffered writes a lot more effiently.

  If balance_dirty_pages() needs to block, we back off on writes as
  indicated.

  This improves buffered write support by 2-3x.

  Jan Kara helped with the mm bits for this, and Stefan handled the
  fs/iomap/xfs/io_uring parts of it"

* tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block:
  mm: honor FGP_NOWAIT for page cache page allocation
  xfs: Add async buffered write support
  xfs: Specify lockmode when calling xfs_ilock_for_iomap()
  io_uring: Add tracepoint for short writes
  io_uring: fix issue with io_write() not always undoing sb_start_write()
  io_uring: Add support for async buffered writes
  fs: Add async write file modification handling.
  fs: Split off inode_needs_update_time and __file_update_time
  fs: add __remove_file_privs() with flags parameter
  fs: add a FMODE_BUF_WASYNC flags for f_mode
  iomap: Return -EAGAIN from iomap_write_iter()
  iomap: Add async buffered write support
  iomap: Add flags parameter to iomap_page_create()
  mm: Add balance_dirty_pages_ratelimited_flags() function
  mm: Move updates of dirty_exceeded into one place
  mm: Move starting of background writeback into the main balancing loop
 2022-08-02 13:27:23 -07:00
Matthew Wilcox (Oracle)
9d0ddc0cb5 fs: Remove aops->migratepage() 
With all users converted to migrate_folio(), remove this operation.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
 2022-08-02 12:34:04 -04:00
Matthew Wilcox (Oracle)
67235182a4 mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio() 
Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
 2022-08-02 12:34:03 -04:00
Matthew Wilcox (Oracle)
5490da4f06 fs: Add aops->migrate_folio 
Provide a folio-based replacement for aops->migratepage.  Update the
documentation to document migrate_folio instead of migratepage.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
 2022-08-02 12:34:03 -04:00
Matthew Wilcox (Oracle)
68f2736a85 mm: Convert all PageMovable users to movable_operations 
These drivers are rather uncomfortably hammered into the
address_space_operations hole.  They aren't filesystems and don't behave
like filesystems.  They just need their own movable_operations structure,
which we can point to directly from page->mapping.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
 2022-08-02 12:34:03 -04:00
Daniil Lunev
04b9407197 vfs: function to prevent re-use of block-device-based superblocks 
The function is to be called from filesystem-specific code to mark a
superblock to be ignored by superblock test and thus never re-used.  The
function also unregisters bdi if the bdi is per-superblock to avoid
collision if a new superblock is created to represent the filesystem.
generic_shutdown_super() skips unregistering bdi for a retired superlock as
it assumes retire function has already done it.

This patch adds the functionality only for the block-device-based supers,
since the primary use case of the feature is to gracefully handle force
unmount of external devices, mounted with FUSE.  This can be further
extended to cover all superblocks, if the need arises.

Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
 2022-07-27 11:30:30 +02:00
Stefan Roesch
66fa3cedf1 fs: Add async write file modification handling. 
This adds a file_modified_async() function to return -EAGAIN if the
request either requires to remove privileges or needs to update the file
modification time. This is required for async buffered writes, so the
request gets handled in the io worker of io-uring.

Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220623175157.1715274-11-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2022-07-24 18:39:32 -06:00
Stefan Roesch
8017553980 fs: add a FMODE_BUF_WASYNC flags for f_mode 
This introduces the flag FMODE_BUF_WASYNC. If devices support async
buffered writes, this flag can be set. It also modifies the check in
generic_write_checks to take async buffered writes into consideration.

Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220623175157.1715274-8-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2022-07-24 18:39:31 -06:00
Yang Xu
2b3416ceff
fs: add mode_strip_sgid() helper 
Add a dedicated helper to handle the setgid bit when creating a new file
in a setgid directory. This is a preparatory patch for moving setgid
stripping into the vfs. The patch contains no functional changes.

Currently the setgid stripping logic is open-coded directly in
inode_init_owner() and the individual filesystems are responsible for
handling setgid inheritance. Since this has proven to be brittle as
evidenced by old issues we uncovered over the last months (see [1] to
[3] below) we will try to move this logic into the vfs.

Link: e014f37db1 ("xfs: use setattr_copy to set vfs inode attributes") [1]
Link: 01ea173e10 ("xfs: fix up non-directory creation in SGID directories") [2]
Link: fd84bfdddd ("ceph: fix up non-directory creation in SGID directories") [3]
Link: https://lore.kernel.org/r/1657779088-2242-1-git-send-email-xuyang2018.jy@fujitsu.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-07-19 15:13:02 +02:00
Shiyang Ruan
6f7db3894a fsdax: dedup file range to use a compare function 
With dax we cannot deal with readpage() etc.  So, we create a dax
comparison function which is similar with vfs_dedupe_file_range_compare().
And introduce dax_remap_file_range_prep() for filesystem use.

Link: https://lkml.kernel.org/r/20220603053738.1218681-13-ruansy.fnst@fujitsu.com
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-07-17 17:14:32 -07:00
Jason A. Donenfeld
868941b144 fs: remove no_llseek 
Now that all callers of ->llseek are going through vfs_llseek(), we
don't gain anything by keeping no_llseek around. Nothing actually calls
it and setting ->llseek to no_lseek is completely equivalent to
leaving it NULL.

Longer term (== by the end of merge window) we want to remove all such
intializations.  To simplify the merge window this commit does *not*
touch initializers - it only defines no_llseek as NULL (and simplifies
the tests on file opening).

At -rc1 we'll need do a mechanical removal of no_llseek -

git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\<no_llseek\>/d' $i
done
would do it.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2022-07-16 09:19:47 -04:00
Christian Brauner
9adf24a409
fs: port HAS_UNMAPPED_ID() to vfs{g,u}id_t 
The HAS_UNMAPPED_ID() helper is fully self contained so we can port it
to vfs{g,u}id_t without much effort.

Cc: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-06-29 12:26:48 +02:00
Christian Brauner
b27c82e129
attr: port attribute changes to new types 
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.

This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.

Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.

The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.

We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.

Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.

The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.

Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-06-26 18:18:56 +02:00
Christian Brauner
1f36146a5a
fs: introduce tiny iattr ownership update helpers 
Nearly all fileystems currently open-code the same checks for
determining whether the i_{g,u}id fields of an inode need to be updated
and then updating the fields.

Introduce tiny helpers i_{g,u}id_needs_update() and i_{g,u}id_update()
that wrap this logic. This allows filesystems to not care about updating
inode->i_{g,u}id with the correct values themselves instead leaving this
to the helpers.

We also get rid of a lot of code duplication and make it easier to
change struct iattr in the future since changes can be localized to
these helpers.

And finally we make it hard to conflate k{g,u}id_t types with
vfs{g,u}id_t types for filesystems that support idmapped mounts.

In the following patch we will port all filesystems that raise
FS_ALLOW_IDMAP to use the new helpers. However, the ultimate goal is to
convert all filesystems to make use of these helpers.

All new helpers are nops on non-idmapped mounts.

Link: https://lore.kernel.org/r/20220621141454.2914719-5-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-06-26 18:18:55 +02:00
Christian Brauner
45c311501c
fs: use mount types in iattr 
Add ia_vfs{g,u}id members of type vfs{g,u}id_t to struct iattr. We use
an anonymous union (similar to what we do in struct file) around
ia_{g,u}id and ia_vfs{g,u}id.

At the end of this series ia_{g,u}id and ia_vfs{g,u}id will always
contain the same value independent of whether struct iattr is
initialized from an idmapped mount. This is a change from how this is
done today.

Wrapping this in a anonymous unions has a few advantages. It allows us
to avoid needlessly increasing struct iattr. Since the types for
ia_{g,u}id and ia_vfs{g,u}id are structures with overlapping/identical
members they are covered by 6.5.2.3/6 of the C standard and it is safe
to initialize and access them.

Filesystems that raise FS_ALLOW_IDMAP and thus support idmapped mounts
will have to use ia_vfs{g,u}id and the associated helpers. And will be
ported at the end of this series. They will immediately benefit from the
type safe new helpers.

Filesystems that do not support FS_ALLOW_IDMAP can continue to use
ia_{g,u}id for now. The aim is to convert every filesystem to always use
ia_vfs{g,u}id and thus ultimately remove the ia_{g,u}id members.

Link: https://lore.kernel.org/r/20220621141454.2914719-4-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-06-26 18:18:55 +02:00
Christian Brauner
234a3113f2
fs: add two type safe mapping helpers 
Introduce i_{g,u}id_into_vfs{g,u}id(). They return vfs{g,u}id_t. This
makes it way harder to confused idmapped mount {g,u}ids with filesystem
{g,u}ids.

The two helpers will eventually replace the old non type safe
i_{g,u}id_into_mnt() helpers once we finished converting all places. Add
a comment noting that they will be removed in the future.

All new helpers are nops on non-idmapped mounts.

Link: https://lore.kernel.org/r/20220621141454.2914719-3-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
 2022-06-26 18:18:54 +02:00
Al Viro
164f4064ca keep iocb_flags() result cached in struct file 
* calculate at the time we set FMODE_OPENED (do_dentry_open() for normal
opens, alloc_file() for pipe()/socket()/etc.)
* update when handling F_SETFL
* keep in a new field - file->f_iocb_flags; since that thing is needed only
before the refcount reaches zero, we can put it into the same anon union
where ->f_rcuhead and ->f_llist live - those are used only after refcount
reaches zero.

Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2022-06-10 16:10:23 -04:00