mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-12-28 01:05:36 +00:00
1939f738c7
14646 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jakub Kicinski
|
1939f738c7 |
selftests: net: add missing config for NF_TARGET_TTL
amt test uses the TTL iptables module:
ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \
-d 239.0.0.1 -j TTL --ttl-set 2
Fixes:
|
||
|
Benjamin Poirier
|
96cd5ac4c0 |
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.
Fixes:
|
||
|
Benjamin Poirier
|
06efafd860 |
selftests: net: List helper scripts in TEST_FILES Makefile variable
Some scripts are not tests themselves; they contain utility functions used by other tests. According to Documentation/dev-tools/kselftest.rst, such files should be listed in TEST_FILES. Move those utility scripts to TEST_FILES. Fixes: |
||
|
Benjamin Poirier
|
9d851dd4da |
selftests: net: Remove executable bits from library scripts
setup_loopback.sh and net_helper.sh are meant to be sourced from other scripts, not executed directly. Therefore, remove the executable bits from those files' permissions. This change is similar to commit |
||
|
Benjamin Poirier
|
8cc063ae1b |
selftests: bonding: Check initial state
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes:
|
||
|
Benjamin Poirier
|
7b6fb3050d |
selftests: team: Add missing config options
Similar to commit |
||
|
Paolo Abeni
|
bc0970d5ac |
selftests: net: don't access /dev/stdout in pmtu.sh
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes:
|
||
|
Paolo Abeni
|
e4e4b6d568 |
selftests: net: fix available tunnels detection
The pmtu.sh test tries to detect the tunnel protocols available
in the running kernel and properly skip the unsupported cases.
In a few more complex setup, such detection is unsuccessful, as
the script currently ignores some intermediate error code at
setup time.
Before:
# which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL]
# PMTU exception wasn't created after creating tunnel exceeding link layer MTU
# ./pmtu.sh: line 931: kill: (7543) - No such process
# ./pmtu.sh: line 931: kill: (7544) - No such process
After:
# xfrm4 not supported
# TEST: vti4: PMTU exceptions [SKIP]
Fixes:
|
||
|
Paolo Abeni
|
f7c25d8e17 |
selftests: net: add missing config for pmtu.sh tests
The mentioned test uses a few Kconfig still missing the
net config, add them.
Before:
# Error: Specified qdisc kind is unknown.
# Error: Specified qdisc kind is unknown.
# Error: Qdisc not classful.
# We have an error talking to the kernel
# Error: Qdisc not classful.
# We have an error talking to the kernel
# policy_routing not supported
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP]
After:
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ]
Fixes:
|
||
|
Dmitry Safonov
|
6caf3adcc8 |
selftests/net: Repair RST passive reset selftest
Currently, the test is racy and seems to not pass anymore.
In order to rectify it, aim on TCP_TW_RST.
Doesn't seem way too good with this sleep() part, but it seems as
a reasonable compromise for the test. There is a plan in-line comment on
how-to improve it, going to do it on the top, at this moment I want it
to run on netdev/patchwork selftests dashboard.
It also slightly changes tcp_ao-lib in order to get SO_ERROR propagated
to test_client_verify() return value.
Fixes:
|
||
|
Dmitry Safonov
|
384aa16d37 |
selftests/net: Rectify key counters checks
As the names of (struct test_key) members didn't reflect whether the key
was used for TX or RX, the verification for the counters was done
incorrectly for asymmetrical selftests.
Rename these with _tx appendix and fix checks in verify_counters().
While at it, as the checks are now correct, introduce skip_counters_checks,
which is intended for tests where it's expected that a key that was set
with setsockopt(sk, IPPROTO_TCP, TCP_AO_INFO, ...) might had no chance
of getting used on the wire.
Fixes the following failures, exposed by the previous commit:
> not ok 51 server: Check current != rnext keys set before connect(): Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 52 server: Check current != rnext keys set before connect(): Counter pkt_good was not expected to increase 0 => 21 for key 137:10
>
> not ok 63 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 64 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was not expected to increase 0 => 40 for key 137:10
Cc: Mohammad Nassiri <mnassiri@ciena.com>
Fixes:
|
||
|
Mohammad Nassiri
|
d8f5df1fce |
selftests/net: Argument value mismatch when calling verify_counters()
The end_server() function only operates in the server thread
and always takes an accept socket instead of a listen socket as
its input argument. To align with this, invert the boolean values
used when calling verify_counters() within the end_server() function.
As a result of this typo, the test didn't correctly check for
the non-symmetrical scenario, where i.e. peer-A uses a key <100:200>
to send data, but peer-B uses another key <105:205> to send its data.
So, in simple words, different keys for TX and RX.
Fixes:
|
||
|
Matthias May
|
c9ec85153f |
selftests: net: add missing config for GENEVE
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes:
|
||
|
Ido Schimmel
|
b40f873a7c |
selftests: net: Add missing matchall classifier
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes:
|
||
|
Jakub Kicinski
|
59c9358349 |
selftests: net: add missing config for nftables-backed iptables
Modern OSes use iptables implementation with nf_tables as a backend, e.g.: $ iptables -V iptables v1.8.8 (nf_tables) Pablo points out that we need CONFIG_NFT_COMPAT to make that work, otherwise we see a lot of: Warning: Extension DNAT revision 0 not supported, missing kernel module? with DNAT being just an example here, other modules we need include udp, TTL, length etc. Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Abeni
|
89abe62837 |
selftests: net: give more time for GRO aggregation
The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.
The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.
Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.
Fixes:
|
||
|
Paolo Abeni
|
d3cb3b0088 |
selftests: net: add missing required classifier
the udpgro_fraglist self-test uses the BPF classifiers, but the
current net self-test configuration does not include it, causing
CI failures:
# selftests: net: udpgro_frglist.sh
# ipv6
# tcp - over veth touching data
# -l 4 -6 -D 2001:db8::1 -t rx -4 -t
# Error: TC classifier not found.
# We have an error talking to the kernel
# Error: TC classifier not found.
# We have an error talking to the kernel
Add the missing knob.
Fixes:
|
||
|
Paolo Abeni
|
fcf67d82b8 |
selftests: net: add missing config for big tcp tests
The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:
# selftests: net: big_tcp.sh
# Error: Failed to load TC action module.
# We have an error talking to the kernel
...
# Testing for BIG TCP:
# CLI GSO | GW GRO | GW GSO | SER GRO
# ./big_tcp.sh: line 107: test: !=: unary operator expected
...
# on on on on : [FAIL_on_link1]
Add the missing configs
Fixes:
|
||
|
Hangbin Liu
|
fc836129f7 |
selftests/net/lib: update busywait timeout value
The busywait timeout value is a millisecond, not a second. So the
current setting 2 is too small. On slow/busy host (or VMs) the
current timeout can expire even on "correct" execution, causing random
failures. Let's copy the WAIT_TIMEOUT from forwarding/lib.sh and set
BUSYWAIT_TIMEOUT here.
Fixes:
|
||
|
Jakub Kicinski
|
39b383d779 |
selftests: tcp_ao: set the timeout to 2 minutes
The default timeout for tests is 45sec, bench-lookups_ipv6
seems to take around 50sec when running in a VM without
HW acceleration. Give it a 2x margin and set the timeout
to 120sec.
Fixes:
|
||
|
Paolo Abeni
|
4acffb6663 |
selftests: net: explicitly wait for listener ready
The UDP GRO forwarding test still hard-code an arbitrary pause
to wait for the UDP listener becoming ready in background.
That causes sporadic failures depending on the host load.
Replace the sleep with the existing helper waiting for the desired
port being exposed.
Fixes:
|
||
|
Paolo Abeni
|
f5173fe3e1 |
selftests: net: included needed helper in the install targets
The blamed commit below introduce a dependency in some net self-tests
towards a newly introduce helper script.
Such script is currently not included into the TEST_PROGS_EXTENDED list
and thus is not installed, causing failure for the relevant tests when
executed from the install dir.
Fix the issue updating the install targets.
Fixes:
|
||
|
Paolo Abeni
|
98cb12eb52 |
selftests: net: remove dependency on ebpf tests
Several net tests requires an XDP program build under the ebpf directory, and error out if such program is not available. That makes running successful net test hard, let's duplicate into the net dir the [very small] program, re-using the existing rules to build it, and finally dropping the bogus dependency. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
b647878400 |
selftests: tcp_ao: add a config file
Still a bit unclear whether each directory should have its own
config file, but assuming they should lets add one for tcp_ao.
The following tests still fail with this config in place:
- rst_ipv4,
- rst_ipv6,
- bench-lookups_ipv6.
other 21 pass.
Fixes:
|
||
|
Linus Torvalds
|
ecb1b8288d |
Including fixes from bpf, netfilter and WiFi.
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding
a NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4 Kbytes
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ER+y
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
|
||
|
Hangbin Liu
|
a2933a8759 |
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
The prio_arp/ns tests hard code the mode to active-backup. At the same
time, The balance-alb/tlb modes do not support arp/ns target. So remove
the prio_arp/ns tests from the loop and only test active-backup mode.
Fixes:
|
||
|
Jakub Kicinski
|
0879020a78 |
selftests: netdevsim: fix the udp_tunnel_nic test
This test is missing a whole bunch of checks for interface
renaming and one ifup. Presumably it was only used on a system
with renaming disabled and NetworkManager running.
Fixes:
|
||
|
Jakub Kicinski
|
0719b5338a |
selftests: net: fix rps_default_mask with >32 CPUs
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes:
|
||
|
Jakub Kicinski
|
04fe7c5029 |
selftests: fill in some missing configs for net
We are missing a lot of config options from net selftests,
it seems:
tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests: CONFIG_NET_SCH_FQ_CODEL
l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf: CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING
gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range: CONFIG_MPTCP
fib_test: CONFIG_NET_CLS_BASIC
rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb: CONFIG_NET_ACT_GACT
tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample: CONFIG_PSAMPLE
fcnal: CONFIG_TCP_MD5SIG
Try to add them in a semi-alphabetical order.
Fixes:
|
||
|
Kuniyuki Iwashima
|
97de5a15ed |
selftest: Don't reuse port for SO_INCOMING_CPU test.
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes:
|
||
|
Linus Torvalds
|
e5075d8ec5 |
RISC-V Patches for the 6.8 Merge Window, Part 4
This includes everything from part 2: * Support for tuning for systems with fast misaligned accesses. * Support for SBI-based suspend. * Support for the new SBI debug console extension. * The T-Head CMOs now use PA-based flushes. * Support for enabling the V extension in kernel code. * Optimized IP checksum routines. * Various ftrace improvements. * Support for archrandom, which depends on the Zkr extension. and then also a fix for those: * The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmWsCOMTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYieQND/0f+1gizTM0OzuqZG9+DOdWTtqmILyr sZaYXWBw6SPzbUSlwjoW4Qp/S3Ur7IhrbfttM2aMoS4GHZvSESAXOMXC4c7AnCaQ HOXBC2OuXvq6jA0ZjK5XPviR70A/7uD2iu5SNO1hyfJK08LSEu+AulxtkW50+wMc bHXSpZxEf8AtwOJK1cRtwhH4qy+Qcs3Nla3jG7OnDsPbhJVcydHx95eCtfwn2cQA KwJPN1fjRtm4ALZb91QcMDO8VAoanfPEkSR3DoNVE/UfdTItYk35VHmf4RWh7IWA qDnV5Mp/XMX2RmJqwi1ZmSHHX0rfVLL5UqgBhGHC8PuMpLJn5p9U6DZ0qD7YWxcB NDlrHsaXt112RHEEM/7CcLkqEexua/ezcC45E5tSQ4sRDZE3fvgbALao67xSQ22D lCpVAY0Z3o5oWaM/jISiQHjSNn5RrAwEYSvvv2pkW4QAMShA2eggmQaCF+Jl4EMp u6yqJpXxDI99C088uvM6Bi2gcX8fnBSmOzCB/sSU4a1I72UpWrGngqUpTYKHG8Jz cTZhbIKmQirBP0vC/UgMOS0sNuw/NykItfRXZ2g0qGKvw1TjJ6djdeZBKcAj3h0E fJpMxuhmeOFYE7DavnhSt3CResFTXZzXLChjxGbT+g10YzVEf9g7vBVnjxAwad9f tryMVpL/ipGpQQ== =Sjhj -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for tuning for systems with fast misaligned accesses. - Support for SBI-based suspend. - Support for the new SBI debug console extension. - The T-Head CMOs now use PA-based flushes. - Support for enabling the V extension in kernel code. - Optimized IP checksum routines. - Various ftrace improvements. - Support for archrandom, which depends on the Zkr extension. - The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. * tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits) lib: checksum: Fix build with CONFIG_NET=n riscv: lib: Check if output in asm goto supported riscv: Fix build error on rv32 + XIP riscv: optimize ELF relocation function in riscv RISC-V: Implement archrandom when Zkr is available riscv: Optimize hweight API with Zbb extension riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold RISC-V: selftests: cbo: Ensure asm operands match constraints ... |
||
|
Benjamin Poirier
|
b01f15a757 |
selftests: bonding: Increase timeout to 1200s
When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:
make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
[...]
# timeout set to 120
# selftests: drivers/net/bonding: bond_options.sh
# TEST: prio (active-backup miimon primary_reselect 0) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 1) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 2) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ]
#
not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds
This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.
I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.
Fixes:
|
||
|
Linus Torvalds
|
736b5545d3 |
Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output
buffer is too small
- bpf: reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets,
avoid infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YhQQ
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
|
||
|
Linus Torvalds
|
db5ccb9eb2 |
cxl for v6.8
- Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52 nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU= =HjCl -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) updates from Dan Williams: "The bulk of this update is support for enumerating the performance capabilities of CXL memory targets and connecting that to a platform CXL memory QoS class. Some follow-on work remains to hook up this data into core-mm policy, but that is saved for v6.9. The next significant update is unifying how CXL event records (things like background scrub errors) are processed between so called "firmware first" and native error record retrieval. The CXL driver handler that processes the record retrieved from the device mailbox is now the handler for that same record format coming from an EFI/ACPI notification source. This also contains miscellaneous feature updates, like Get Timestamp, and other fixups. Summary: - Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups" * tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits) cxl/core: use sysfs_emit() for attr's _show() cxl/pci: Register for and process CPER events PCI: Introduce cleanup helpers for device reference counts and locks acpi/ghes: Process CXL Component Events cxl/events: Create a CXL event union cxl/events: Separate UUID from event structures cxl/events: Remove passing a UUID to known event traces cxl/events: Create common event UUID defines cxl/events: Promote CXL event structures to a core header cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe() cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge() cxl: Fix device reference leak in cxl_port_perf_data_calculate() cxl: Convert find_cxl_root() to return a 'struct cxl_root *' cxl: Introduce put_cxl_root() helper cxl/port: Fix missing target list lock cxl/port: Fix decoder initialization when nr_targets > interleave_ways cxl/region: fix x9 interleave typo cxl/trace: Pass UUID explicitly to event traces cxl/region: use %pap format to print resource_size_t cxl/region: Add dev_dbg() detail on failure to allocate HPA space ... |
||
|
Linus Torvalds
|
86c4d58a99 |
iommufd for 6.8
This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into the
iommu itself. The Intel implementation will also generate an ATC
invalidation to flush the device IOTLB as it unambiguously knows the
device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables (aka
nested translation for VMs) to allow Intel to have full functionality for
simple cases. An Intel implementation of the operation is provided.
Fix a small bug in the selftest mock iommu driver probe.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZaFiRQAKCRCFwuHvBreF
YbmgAP9Z0+cAUPKxUKaMRls8YR+gmaOCniSkqBlyrxcib+F/WAD2NPLcBPBRk2o7
GfXPIrovx96Btf8M40AFdiTEp7LABw==
=9POe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
the iommu itself. The Intel implementation will also generate an
ATC invalidation to flush the device IOTLB as it unambiguously
knows the device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables
(aka nested translation for VMs) to allow Intel to have full
functionality for simple cases. An Intel implementation of the
operation is provided.
Also fix a small bug in the selftest mock iommu driver probe"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check the bus type during probe
iommu/vt-d: Add iotlb flush for nested domain
iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
iommufd/selftest: Add mock_domain_cache_invalidate_user support
iommu: Add iommu_copy_struct_from_user_array helper
iommufd: Add IOMMU_HWPT_INVALIDATE
iommu: Add cache_invalidate_user op
|
||
|
Linus Torvalds
|
a2ded784cd |
tracing updates for 6.8:
- Allow kernel trace instance creation to specify what events are created Inside the kernel, a subsystem may create a tracing instance that it can use to send events to user space. This sub-system may not care about the thousands of events that exist in eventfs. Allow the sub-system to specify what sub-systems of events it cares about, and only those events are exposed to this instance. - Allow the ring buffer to be broken up into bigger sub-buffers than just the architecture page size. A new tracefs file called "buffer_subbuf_size_kb" is created. The user can now specify a minimum size the sub-buffer may be in kilobytes. Note, that the implementation currently make the sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in kilobyte size, and the sub-buffer will be updated to the next size that it will can accommodate it. If the user writes in 10, it will change the size to be 4 pages on x86 (16K), as that is the next available size that can hold 10K pages. - Update the debug output when a corrupt time is detected in the ring buffer. If the ring buffer detects inconsistent timestamps, there's a debug config options that will dump the contents of the meta data of the sub-buffer that is used for debugging. Add some more information to this dump that helps with debugging. - Add more timestamp debugging checks (only triggers when the config is enabled) - Increase the trace_seq iterator to 2 page sizes. - Allow strings written into tracefs_marker to be larger. Up to just under 2 page sizes (based on what trace_seq can hold). - Increase the trace_maker_raw write to be as big as a sub-buffer can hold. - Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been removed. - More selftests were added. - Some code clean ups as well. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZZ8p3BQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6ql2GAQDZg/zlFEiJHyTfWbCIE8pA3T5xbzKo 26TNxIZAxJJZpQEAvGFU5Smy14pG6soEoVMp8B6ZOANbqU8VVamhOL+r+Qw= =0OYG -----END PGP SIGNATURE----- Merge tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Allow kernel trace instance creation to specify what events are created Inside the kernel, a subsystem may create a tracing instance that it can use to send events to user space. This sub-system may not care about the thousands of events that exist in eventfs. Allow the sub-system to specify what sub-systems of events it cares about, and only those events are exposed to this instance. - Allow the ring buffer to be broken up into bigger sub-buffers than just the architecture page size. A new tracefs file called "buffer_subbuf_size_kb" is created. The user can now specify a minimum size the sub-buffer may be in kilobytes. Note, that the implementation currently make the sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in kilobyte size, and the sub-buffer will be updated to the next size that it will can accommodate it. If the user writes in 10, it will change the size to be 4 pages on x86 (16K), as that is the next available size that can hold 10K pages. - Update the debug output when a corrupt time is detected in the ring buffer. If the ring buffer detects inconsistent timestamps, there's a debug config options that will dump the contents of the meta data of the sub-buffer that is used for debugging. Add some more information to this dump that helps with debugging. - Add more timestamp debugging checks (only triggers when the config is enabled) - Increase the trace_seq iterator to 2 page sizes. - Allow strings written into tracefs_marker to be larger. Up to just under 2 page sizes (based on what trace_seq can hold). - Increase the trace_maker_raw write to be as big as a sub-buffer can hold. - Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been removed. - More selftests were added. - Some code clean ups as well. * tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits) ring-buffer: Remove stale comment from ring_buffer_size() tracing histograms: Simplify parse_actions() function tracing/selftests: Remove exec permissions from trace_marker.tc test ring-buffer: Use subbuf_order for buffer page masking tracing: Update subbuffer with kilobytes not page order ringbuffer/selftest: Add basic selftest to test changing subbuf order ring-buffer: Add documentation on the buffer_subbuf_order file ring-buffer: Just update the subbuffers when changing their allocation order ring-buffer: Keep the same size when updating the order tracing: Stop the tracing while changing the ring buffer subbuf size tracing: Update snapshot order along with main buffer order ring-buffer: Make sure the spare sub buffer used for reads has same size ring-buffer: Do no swap cpu buffers if order is different ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure ring-buffer: Read and write to ring buffers with custom sub buffer size ring-buffer: Set new size of the ring buffer sub page ring-buffer: Add interface for configuring trace sub buffer size ring-buffer: Page size per ring buffer ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter ring-buffer: Check if absolute timestamp goes backwards ... |
||
|
Linus Torvalds
|
ba7dd8570d |
- Clean up selftest compilation issues, mostly from non-gcc compilers
- Avoid building selftests when not on x86 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmWfAycACgkQaDWVMHDJ krD5XQ/+KQ7kITy7jr5fskRQ3uGjk9KUnc3e3qO/SxDLJU9xuXbZbh5pqxZQrkud mj0G1LRCk8wsIPU44wP9SKPQRG9AqcsCNSiBkBaTBusHyCXCCvoJ013Mlqyj9ecz bvaYuHDuji29eV/0+xuOcv8ELJHFp/UCTQk6azeQIfUs/97/Ho2qMb1oHC7zNjWX okJBUj73tLO3EUCW5p9cLw2TgrmOtNa6KlNqj//xoDx03HofjoGyrx2fd8RcmOvY Z2v8XEfx/fnpD8vA8SwnCKhWDLHDdwdnLMREy3gykt3PBdmuIKTT5fIggMSMZh6c wbxYALGMyE+T0klIfme4k4SJuoitI+Ec/naW/aP3buAgdVFXVw7+KjAwEcOi18Sx kSpzvYCwE+sHIZdErk+1Wx/VIWgCBfkAr4hPLgxl5s6nHB2l7lXwGLvaxiBbXSQO aMDVD61JwCPI5WuLG8r8iCsCdbRwZVoe4Jm+CkwE69BccZfTXmjOuP0uNTY+cOoH Wroe74XGQp4QOvaBhunkzT/ntLaDcQvXGOhaTrYmCvElu1gB25c/FdEIPMTcQgPv dFMm49Gzo7v4RZjm/LSavJz6DU/40PRTYMntbKGSiirxAmxwpG8uNz9nUm6Q/4+D 7uL0be3ey2DzGa+8FoYe9T3i0LbGiRBjlNIEXMjWh1pnD/auUGA= =PaVo -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Dave Hansen: "This time, these are entirely confined to SGX selftests fixes. The mini SGX enclave built by the selftests has garnered some attention because it stands alone and does not need the sizable infrastructure of the official SGX SDK. I think that's why folks are suddently interested in cleaning it up. - Clean up selftest compilation issues, mostly from non-gcc compilers - Avoid building selftests when not on x86" * tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/sgx: Skip non X86_64 platform selftests/sgx: Remove incomplete ABI sanitization code in test enclave selftests/sgx: Discard unsupported ELF sections selftests/sgx: Ensure expected location of test enclave buffer selftests/sgx: Ensure test enclave buffer is entirely preserved selftests/sgx: Fix linker script asserts selftests/sgx: Handle relocations in test enclave selftests/sgx: Produce static-pie executable for test enclave selftests/sgx: Remove redundant enclave base address save/restore selftests/sgx: Specify freestanding environment for enclave compilation selftests/sgx: Separate linker options selftests/sgx: Include memory clobber for inline asm in test enclave selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry selftests/sgx: Fix uninitialized pointer dereference in error path |
||
|
Jakub Kicinski
|
4349efc52b |
bpf-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZalBVQAKCRDbK58LschI gyfQAP4+KhkJiJiOXsECo0f3JcuzDgCqEMnylNx0Wujzgs2s9wD+LEjYr8zztqUd E9rkjGKUoSYYfarEJ0KKfy6Lv61BlgY= =xI6t -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-01-18 We've added 10 non-merge commits during the last 5 day(s) which contain a total of 12 files changed, 806 insertions(+), 51 deletions(-). The main changes are: 1) Fix an issue in bpf_iter_udp under backward progress which prevents user space process from finishing iteration, from Martin KaFai Lau. 2) Fix BPF verifier to reject variable offset alu on registers with a type of PTR_TO_FLOW_KEYS to prevent oob access, from Hao Sun. 3) Follow up fixes for kernel- and libbpf-side logic around handling arg:ctx tagged arguments of BPF global subprogs, from Andrii Nakryiko. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: libbpf: warn on unexpected __arg_ctx type when rewriting BTF selftests/bpf: add tests confirming type logic in kernel for __arg_ctx bpf: enforce types for __arg_ctx-tagged arguments in global subprogs bpf: extract bpf_ctx_convert_map logic and make it more reusable libbpf: feature-detect arg:ctx tag support in kernel selftests/bpf: Add test for alu on PTR_TO_FLOW_KEYS bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS selftests/bpf: Test udp and tcp iter batching bpf: Avoid iter->offset making backward progress in bpf_iter_udp bpf: iter_udp: Retry with a larger batch size without going back to the previous bucket ==================== Link: https://lore.kernel.org/r/20240118153936.11769-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Amit Cohen
|
b34f4de6d3 |
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
'qos_pfc' test checks PFC behavior. The idea is to limit the traffic
using a shaper somewhere in the flow of the packets. In this area, the
buffer is smaller than the buffer at the beginning of the flow, so it fills
up until there is no more space left. The test configures there PFC
which is supposed to notice that the headroom is filling up and send PFC
Xoff to indicate the transmitter to stop sending traffic for the priorities
sharing this PG.
The Xon/Xoff threshold is auto-configured and always equal to
2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet,
traffic will keep arriving until the transmitter receives and processes
the PFC packet. This amount of traffic is known as the PFC delay allowance.
Currently the buffer for the delay traffic is configured as 100KB. The
MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB.
This allows 80KB extra to be stored in this buffer.
8-lane ports use two buffers among which the configured buffer is split,
the Xoff threshold then applies to each buffer in parallel.
The test does not take into account the behavior of 8-lane ports, when the
ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes,
packets are dropped and the test fails.
Check if the relevant ports use 8 lanes, in such case double the size of
the buffer, as the headroom is split half-half.
Cc: Shuah Khan <shuah@kernel.org>
Fixes:
|
||
|
Amit Cohen
|
40cc674baf |
selftests: mlxsw: qos_pfc: Remove wrong description
In the diagram of the topology, $swp3 and $swp4 are described as 1Gbps
ports. This is wrong information, the test does not configure such speed.
Cc: Shuah Khan <shuah@kernel.org>
Fixes:
|
||
|
Ido Schimmel
|
483ae90d8f |
mlxsw: spectrum_acl_tcam: Fix stack corruption
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes:
|
||
|
Amit Cohen
|
6d6eeabcfa |
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.
The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.
Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.
gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.
Fix this by changing erp_table->base_index only in case of a successful
allocation.
Add a test case for such a scenario. Without this fix it causes
segmentation fault:
$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null
[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
<TASK>
__mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
objagg_obj_root_destroy+0x18/0x80 [objagg]
objagg_obj_destroy+0x12c/0x130 [objagg]
mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
tc_setup_cb_destroy+0xc1/0x180
fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
__fl_delete+0x1ac/0x1c0 [cls_flower]
fl_destroy+0xc2/0x150 [cls_flower]
tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
Fixes:
|
||
|
Benjamin Poirier
|
dd2d40acdb |
selftests: bonding: Add more missing config options
As a followup to commit |
||
|
Jakub Kicinski
|
39369c9a6e |
selftests: netdevsim: add a config file
netdevsim tests aren't very well integrated with kselftest,
which has its advantages and disadvantages. But regardless
of the intended integration - a config file to know what kernel
to build is very useful, add one.
Fixes:
|
||
|
Andrii Nakryiko
|
989410cde8 |
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
Add a bunch of global subprogs across variety of program types to validate expected kernel type enforcement logic for __arg_ctx arguments. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240118033143.3384355-5-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
01b55f4f0c |
libbpf: feature-detect arg:ctx tag support in kernel
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If this is detected, libbpf will avoid doing any __arg_ctx-related BTF rewriting and checks in favor of letting kernel handle this completely. test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same feature detection (albeit in much simpler, though round-about and inefficient, way), and skip the tests. This is done to still be able to execute this test on older kernels (like in libbpf CI). Note, BPF token series ([0]) does a major refactor and code moving of libbpf-internal feature detection "framework", so to avoid unnecessary conflicts we keep newly added feature detection stand-alone with ad-hoc result caching. Once things settle, there will be a small follow up to re-integrate everything back and move code into its final place in newly-added (by BPF token series) features.c file. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=* Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrew Jones
|
0de65288d7
|
RISC-V: selftests: cbo: Ensure asm operands match constraints
The 'i' constraint expects a constant operand, which fn and its
constant derivative MK_CBO(fn) are, but passing fn through a function
as a parameter and using a local variable for MK_CBO(fn) allow the
compiler to lose sight of that when no optimization is done. Use
a macro instead of a function and skip the local variable to ensure
the compiler uses constants, matching the asm constraints.
Reported-by: Yunhui Cui <cuiyunhui@bytedance.com>
Closes: https://lore.kernel.org/all/20240117082514.42967-1-cuiyunhui@bytedance.com
Fixes:
|
||
|
Linus Torvalds
|
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
|
Linus Torvalds
|
09d1c6a80f |
Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
|
Linus Torvalds
|
4331f07026 |
RISC-V Patches for the 6.8 Merge Window, Part 1
* Support for many new extensions in hwprobe, along with a handful of
cleanups.
* Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE.
* Support for the which-cpus flavor of hwprobe.
* Support for XIP kernels has been resurrected.
-----BEGIN PGP SIGNATURE-----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=fLgG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
|