Since commit 4291d085b0 ("powerpc/32s: Make pte_update() non
atomic on 603 core"), pte_update() has been using
mmu_has_feature(MMU_FTR_HPTE_TABLE) to avoid a useless atomic
operation on 603 cores.
When kasan_early_init() sets up the early zero shadow, it uses
__set_pte_at(). On book3s/32, __set_pte_at() calls pte_update()
when CONFIG_SMP is selected in order to ensure the preservation of
_PAGE_HASHPTE in case of concurrent update of the PTE. But that's
too early for mmu_has_feature(), so when
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is selected, mmu_has_feature()
calls printk(). That's too early to call printk() because KASAN
early zero shadow page is not set up yet. It leads to a deadlock.
However, when kasan_early_init() is called, there is only one CPU
running and no risk of concurrent PTE update. So __set_pte_at() can
be called with the 'percpu' flag. With that flag set, the PTE is
written directly instead of being written via pte_update().
Fixes: 4291d085b0 ("powerpc/32s: Make pte_update() non atomic on 603 core")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2ee707512b8b212b079b877f4ceb525a1606a3fb.1656655567.git.christophe.leroy@csgroup.eu
Always set an IBAT covering up to _einittext during init because when
CONFIG_MODULES is not selected there is no reason to have an exception
handler for kernel instruction TLB misses.
It implies DBAT and IBAT are now totaly independent, IBATs are set
by setibat() and DBAT by setbat().
This allows to revert commit 9bb162fa26 ("powerpc/603: Fix
boot failure with DEBUG_PAGEALLOC and KFENCE")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce7f04a39593934d9b1ee68c69144ccd3d4da4a1.1655202804.git.christophe.leroy@csgroup.eu
mark_initmem_nx() calls either mmu_mark_initmem_nx() or
set_memory_attr() based on return from v_block_mapped()
of _sinittext.
But we can now handle text and data independently, so that
text may be mapped by block even when data is mapped by pages.
On the 8xx for instance, at startup 32Mbytes of memory are
pinned in TLB. So the pinned entries need to go away for sinittext.
In next patch a BAT will be set to also covers sinittext on book3s/32.
So it will also be needed to call mmu_mark_initmem_nx() even when
data above sinittext is not mapped with BATs.
As this is highly dependent on the platform, call mmu_mark_initmem_nx()
regardless of data block mapping. Then the platform will know what to
do.
Modify 8xx mmu_mark_initmem_nx() so that inittext mapping is modified
only when pagealloc debug and kfence are not active, otherwise inittext
is mapped with standard pages. And don't do anything on kernel text
which is already mapped with PAGE_KERNEL_TEXT.
Fixes: da1adea075 ("powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLB")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/db3fc14f3bfa6215b0786ef58a6e2bc1e1f964d7.1655202804.git.christophe.leroy@csgroup.eu
The nest MMU in POWER9 does not re-fetch the PTE in response to
permission mismatch, contrary to the architecture[*] and unlike the core
MMU. This requires a TLB flush before upgrading permissions of valid
PTEs, for any address space with a coprocessor attached.
Per (non-public) Nest MMU Workbook, POWER10 nest MMU conforms to the
architecture in this regard, so skip the workaround.
[*] See: Power ISA Version 3.1B, 6.10.1.2 Modifying a Translation Table
Entry, Setting a Reference or Change Bit or Upgrading Access
Authority (PTE Subject to Atomic Hardware Updates):
"If the only change being made to a valid PTE that is subject to
atomic hardware updates is to set the Reference or Change bit to
1 or to upgrade access authority, a simpler sequence suffices
because the translation hardware will refetch the PTE if an
access is attempted for which the only problems were reference
and/or change bits needing to be set or insufficient access
authority."
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525022358.780745-3-npiggin@gmail.com
Per (non-public) Nest MMU Workbook, POWER10 and POWER9P NMMU does not
cache PTEs in PWC, so does not require PWC flush to invalidate these
translations.
Skip the workaround on POWER10 and later.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525022358.780745-2-npiggin@gmail.com
Since commit 87c78b612f ("powerpc: Fix all occurences of "the the"")
fixed "the the", there's now a steady stream of patches fixing other
duplicate words.
Just fix them all at once, to save the overhead of dealing with
individual patches for each case.
This leaves a few cases of "that that", which in some contexts is
correct.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220718095158.326606-1-mpe@ellerman.id.au
Merge our fixes branch. In particular this brings in commit
9864816180 ("powerpc/book3e: Fix PUD allocation size in
map_kernel_page()") which fixes a build failure in next, because commit
2db2008e63 ("powerpc/64e: Rewrite p4d_populate() as a static inline
function") depends on it.
With commit ffa0b64e3b ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
the kernel now validate the addr against high_memory value. This results
in the below BUG_ON with dax pfns.
[ 635.798741][T26531] kernel BUG at mm/page_alloc.c:5521!
1:mon> e
cpu 0x1: Vector: 700 (Program Check) at [c000000007287630]
pc: c00000000055ed48: free_pages.part.0+0x48/0x110
lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0
sp: c0000000072878d0
msr: 800000000282b033
current = 0xc00000000afabe00
paca = 0xc00000037ffff300 irqmask: 0x03 irq_happened: 0x05
pid = 26531, comm = 50-landscape-sy
kernel BUG at :5521!
Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022
1:mon> t
[link register ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0
[c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable)
[c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0
[c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210
[c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40
[c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00
[c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0
[c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310
[c000000007287d80] c00000000062858c sys_execve+0x4c/0x60
[c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0
[c000000007287e10] c00000000000c53c system_call_common+0xec/0x250
The fix is to make sure we update high_memory on memory hotplug.
This is similar to what x86 does in commit 3072e413e3 ("mm/memory_hotplug: introduce add_pages")
Fixes: ffa0b64e3b ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629050925.31447-1-aneesh.kumar@linux.ibm.com
We now have memory organised in a way that allows
implementing KASAN.
Unlike book3s/64, book3e always has translation active so the only
thing needed to use KASAN is to setup an early zero shadow mapping
just after setting a stack pointer and before calling early_setup().
The memory layout is now as follows
+------------------------+ Kernel virtual map end (0xc000200000000000)
| |
| 16TB of KASAN map |
| |
+------------------------+ Kernel KASAN shadow map start
| |
| 16TB of IO map |
| |
+------------------------+ Kernel IO map start
| |
| 16TB of vmemmap |
| |
+------------------------+ Kernel vmemmap start
| |
| 16TB of vmap |
| |
+------------------------+ Kernel virt start (0xc000100000000000)
| |
| 64TB of linear mem |
| |
+------------------------+ Kernel linear (0xc.....)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0bef8beda27baf71e3b9e8b13e620fba6e19499b.1656427701.git.christophe.leroy@csgroup.eu
Today nohash/64 have linear memory based at 0xc000000000000000 and
virtual memory based at 0x8000000000000000.
In order to implement KASAN, we need to regroup both areas.
Move virtual memmory at 0xc000100000000000.
This complicates a bit TLB miss handlers. Until now, memory region
was easily identified with the 4 higher bits of address:
- 0 ==> User
- c ==> Linear Memory
- 8 ==> Virtual Memory
Now we need to rely on the 20 higher bits, with:
- 0xxxx ==> User
- c0000 ==> Linear Memory
- c0001 ==> Virtual Memory
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b225168031449fc34fc7132f3923cc8dc54af60.1656427701.git.christophe.leroy@csgroup.eu
Commit fb5a515704 ("powerpc: Remove platforms/wsp and associated
pieces") removed the last CPU having features MMU_FTRS_A2 and
commit cd68098bce ("powerpc: Clean up MMU_FTRS_A2 and
MMU_FTR_TYPE_3E") removed MMU_FTRS_A2 which was the last user of
MMU_FTR_USE_TLBRSRV and MMU_FTR_USE_PAIRED_MAS.
Remove all code that relies on MMU_FTR_USE_TLBRSRV and
MMU_FTR_USE_PAIRED_MAS.
With this change done, TLB miss can happen before the mmu feature
fixups.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cfd5a0ecdb1598da968832e1bddf7431ec267200.1656427701.git.christophe.leroy@csgroup.eu
With KUAP, the TLB miss handler bails out when an access to user
memory is performed with a nul TID.
But the normal TLB miss routine which is only used early during boot
does the check regardless for all memory areas, not only user memory.
By chance there is no early IO or vmalloc access, but when KASAN
come we will start having early TLB misses.
Fix it by creating a special branch for user accesses similar to the
one in the 'bolted' TLB miss handlers. Unfortunately SPRN_MAS1 is
now read too early and there are no registers available to preserve
it so it will be read a second time.
Fixes: 57bc963837 ("powerpc/kuap: Wire-up KUAP on book3e/64")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8d6c5859a45935d6e1a336da4dc20be421e8cea7.1656427701.git.christophe.leroy@csgroup.eu
On FSL_BOOK3E, _PAGE_RW is defined with two bits, one for user and one
for supervisor. As soon as one of the two bits is set, the page has
to be display as RW. But the way it is implemented today requires both
bits to be set in order to display it as RW.
Instead of display RW when _PAGE_RW bits are set and R otherwise,
reverse the logic and display R when _PAGE_RW bits are all 0 and
RW otherwise.
This change has no impact on other platforms as _PAGE_RW is a single
bit on all of them.
Fixes: 8eb07b1870 ("powerpc/mm: Dump linux pagetables")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c33b96317811edf691e81698aaee8fa45ec3449.1656427391.git.christophe.leroy@csgroup.eu
__map_without_ltlbs is used only for 40x, and only when
STRICT_KERNEL_RWX, KFENCE or DEBUG_PAGEALLOC is active.
Do the verification directly in 40x version of mmu_mapin_ram()
and remove __map_without_ltlbs from core ppc32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3422094db965d218c4c3d8580f526963a9ac897f.1655202721.git.christophe.leroy@csgroup.eu
Mapping without large TLBs has no added value on the 8xx.
Mapping without large TLBs is still necessary on 40x when
selecting CONFIG_KFENCE or CONFIG_DEBUG_PAGEALLOC or
CONFIG_STRICT_KERNEL_RWX, but this is done automatically
and doesn't require user selection.
Remove 'noltlbs' kernel parameter, the user has no reason
to use it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80ca17bd39cf608a8ebd0764d7064a498e131199.1655202721.git.christophe.leroy@csgroup.eu
Trying to remove asm/ppc_asm.h from all places that don't need it
leads to several failures linked to firmware_has_feature().
To fix it, include asm/firmware.h in all files using
firmware_has_feature()
All users found with:
git grep -L "firmware\.h" ` git grep -l "firmware_has_feature("`
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/11956ec181a034b51a881ac9c059eea72c679a73.1651828453.git.christophe.leroy@csgroup.eu
Commit 2fb4706057 ("powerpc: add support for folded p4d page tables")
erroneously changed PUD setup to a mix of PMD and PUD. Fix it.
While at it, use PTE_TABLE_SIZE instead of PAGE_SIZE for PTE tables
in order to avoid any confusion.
Fixes: 2fb4706057 ("powerpc: add support for folded p4d page tables")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/95ddfd6176d53e6c85e13bd1c358359daa56775f.1655974558.git.christophe.leroy@csgroup.eu
I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page. It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).
Then after that throttling we return VM_FAULT_RETRY.
We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.
However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.
It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.
To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.
To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock. It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.
This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:
Before: 650.980 ms (+-1.94%)
After: 569.396 ms (+-1.38%)
I believe it could help more than that.
We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.
Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.
I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.
Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
You cannot include <generated/compile.h> here because it is generated
in init/Makefile but there is no guarantee that it happens before
arch/powerpc/mm/nohash/kaslr_booke.c is compiled for parallel builds.
The places where you can reliably include <generated/compile.h> are:
- init/ (because init/Makefile can specify the dependency)
- arch/*/boot/ (because it is compiled after vmlinux)
Commit f231e43333 ("hexagon: get rid of #include <generated/compile.h>")
fixed the last breakage at that time, but powerpc re-added this.
<generated/compile.h> was unneeded because 'build_str' is almost the
same as 'linux_banner' defined in init/version.c
Let's copy the solution from MIPS.
(get_random_boot() in arch/mips/kernel/relocate.c)
Fixes: 6a38ea1d7b ("powerpc/fsl_booke/32: randomize the kernel image offset")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220604085050.4078927-1-masahiroy@kernel.org
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT).
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later).
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ.
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later.
- Drop support for system call instruction emulation.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn
Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan
Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu
Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent
Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan
Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár,
Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong,
Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, Zucheng
Zheng.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmKSEgETHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgJpLEACee7mu2I00Z7VWtW5ckT4RFbAXYZcM
Hv5DbTnVB2ItoQMRHvG52DNbR73j9HnYrz8kpwfTBVk90udxVP14L/swXDs3xbT4
riXEYtJ1DRVc/bLiOK637RLPWNrmmZStWZme7k0Y9Ki5Aif8i1Erjjq7EIy47m9j
j1MTcwp3ND7IsBON2nZ3PkttEHhevKvOwCPb/BWtPMDV0OhyQUFKB2SNegrlCrkT
wshDgdQcYqbIix98PoGa2ZfUVgFQD3JVLzXa4sLpqouzGD+HvEFStOFa2Gq/ZEvV
zunaeXDdZUCjlib6KvA8+aumBbIQ1s/urrDbxd+3BuYxZ094vNP1B428NT1AWVtl
3bEZQIN8GSx0v9aHxZ8HePsAMXgG9d2o0xC9EMQ430+cqroN+6UHP7lkekwkprb7
U9EpZCG9U8jV6SDcaMigW3tooEjn657we0R8nZG2NgUNssdSHVh/JYxGDALPXIAk
awL3NQrR0tYF3Y3LJm5AxdQrK1hJH8E+hZFCZvIpUXGsr/uf9Gemy/62pD1rhrr/
niULpxIneRGkJiXB5qdGy8pRu27ED53k7Ky6+8MWSEFQl1mUsHSryYACWz939D8c
DydhBwQqDTl6Ozs41a5TkVjIRLOCrZADUd/VZM6A4kEOqPJ5t2Gz22Bn8ya1z6Ks
5Sx6vrGH7GnDjA==
=15oQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
On fsl_book3e, rodata is set read-only at the same time as
init text is set NX at the end of init. That's too early.
As both action are performed at the same time, delay both
actions to the time rodata is expected to be made read-only.
It means we will have a small window with init mem freed but
still executable. It shouldn't be an issue though, especially
because the said memory gets poisoned and should therefore
result to a bad instruction fault in case it gets executed.
mmu_mark_initmem_nx() is bailing out before doing anything when
CONFIG_STRICT_KERNEL_RWX is not selected or rodata_enabled is false.
mmu_mark_rodata_ro() is called only when CONFIG_STRICT_KERNEL_RWX
is selected and rodata_enabled is true so this is equivalent.
Move code from mmu_mark_initmem_nx() into mmu_mark_rodata_ro() and
remove the call to strict_kernel_rwx_enabled() which is not needed
anymore.
Fixes: d5970045cf ("powerpc/fsl_booke: Update of TLBCAMs after init")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2e35f0fd649c83c5add17a99514ac040767be93a.1652981047.git.christophe.leroy@csgroup.eu
powerpc is the only platform that do not rely on
cpu_up()->try_online_node() to bring up a numa node,
and special cases it, instead, deep in its own machinery:
dlpar_online_cpu
find_and_online_cpu_nid
try_online_node
This should not be needed, but the thing is that the try_online_node()
from cpu_up() will not apply on the right node, because cpu_to_node()
will return the old mapping numa<->cpu that gets set on boot stage
for all possible cpus.
That can be seen easily if we try to print out the numa node passed
to try_online_node() in cpu_up().
The thing is that the numa<->cpu mapping does not get updated till a much
later stage in start_secondary:
start_secondary:
set_numa_node(numa_cpu_lookup_table[cpu])
But we do not really care, as we already now the
CPU <-> NUMA associativity back in find_and_online_cpu_nid(),
so let us make use of that and set the proper numa<->cpu mapping,
so cpu_to_node() in cpu_up() returns the right node and
try_online_node() can do its work.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220411074934.4632-1-osalvador@suse.de
arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘kaslr_get_cmdline’:
arch/powerpc/mm/nohash/kaslr_booke.c:46:2: error: implicit declaration of function ‘early_init_dt_scan_chosen’
early_init_dt_scan_chosen(boot_command_line);
^~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘get_initrd_range’:
arch/powerpc/mm/nohash/kaslr_booke.c:210:10: error: implicit declaration of function ‘of_read_number’
start = of_read_number(prop, len / 4);
^~~~~~~~~~~~~~
Add missing include files to fix this.
Fixes: 86c38fec69 ("powerpc: Remove asm/prom.h from all files that don't need it")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220517094900.14900-1-yuehaibing@huawei.com
arch/powerpc/mm/nohash/fsl_book3e.c: In function ‘relocate_init’:
arch/powerpc/mm/nohash/fsl_book3e.c:348:2: error: implicit declaration of function ‘early_get_first_memblock_info’
early_get_first_memblock_info(__va(dt_ptr), &size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add missing include file linux/of_fdt.h to fix this.
Fixes: 86c38fec69 ("powerpc: Remove asm/prom.h from all files that don't need it")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220517094830.27560-1-yuehaibing@huawei.com
Implement a limited form of KASAN for Book3S 64-bit machines running under
the Radix MMU, supporting only outline mode.
- Enable the compiler instrumentation to check addresses and maintain the
shadow region. (This is the guts of KASAN which we can easily reuse.)
- Require kasan-vmalloc support to handle modules and anything else in
vmalloc space.
- KASAN needs to be able to validate all pointer accesses, but we can't
instrument all kernel addresses - only linear map and vmalloc. On boot,
set up a single page of read-only shadow that marks all iomap and
vmemmap accesses as valid.
- Document KASAN in powerpc docs.
Background
----------
KASAN support on Book3S is a bit tricky to get right:
- It would be good to support inline instrumentation so as to be able to
catch stack issues that cannot be caught with outline mode.
- Inline instrumentation requires a fixed offset.
- Book3S runs code with translations off ("real mode") during boot,
including a lot of generic device-tree parsing code which is used to
determine MMU features.
[ppc64 mm note: The kernel installs a linear mapping at effective
address c000...-c008.... This is a one-to-one mapping with physical
memory from 0000... onward. Because of how memory accesses work on
powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the
same memory both with translations on (accessing as an 'effective
address'), and with translations off (accessing as a 'real
address'). This works in both guests and the hypervisor. For more
details, see s5.7 of Book III of version 3 of the ISA, in particular
the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this
KASAN implementation currently only supports Radix.]
- Some code - most notably a lot of KVM code - also runs with translations
off after boot.
- Therefore any offset has to point to memory that is valid with
translations on or off.
One approach is just to give up on inline instrumentation. This way
boot-time checks can be delayed until after the MMU is set is up, and we
can just not instrument any code that runs with translations off after
booting. Take this approach for now and require outline instrumentation.
Previous attempts allowed inline instrumentation. However, they came with
some unfortunate restrictions: only physically contiguous memory could be
used and it had to be specified at compile time. Maybe we can do better in
the future.
[paulus@ozlabs.org - Rebased onto 5.17. Note that a kernel with
CONFIG_KASAN=y will crash during boot on a machine using HPT
translation because not all the entry points to the generic
KASAN code are protected with a call to kasan_arch_is_ready().]
Originally-by: Balbir Singh <bsingharora@gmail.com> # ppc64 out-of-line radix version
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Update copyright year and comment formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTE69OQwiG7z+Gu@cleo
kasan is already implied by the directory name, we don't need to
repeat it.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTEyoi+xu9brJYe@cleo
LoPAPR defines guest visible IOMMU with hypercalls to use it -
H_PUT_TCE/etc. Implemented first on POWER7 where hypercalls would trap
in the KVM in the real mode (with MMU off). The problem with the real mode
is some memory is not available and some API usage crashed the host but
enabling MMU was an expensive operation.
The problems with the real mode handlers are:
1. Occasionally these cannot complete the request so the code is
copied+modified to work in the virtual mode, very little is shared;
2. The real mode handlers have to be linked into vmlinux to work;
3. An exception in real mode immediately reboots the machine.
If the small DMA window is used, the real mode handlers bring better
performance. However since POWER8, there has always been a bigger DMA
window which VMs use to map the entire VM memory to avoid calling
H_PUT_TCE. Such 1:1 mapping happens once and uses H_PUT_TCE_INDIRECT
(a bulk version of H_PUT_TCE) which virtual mode handler is even closer
to its real mode version.
On POWER9 hypercalls trap straight to the virtual mode so the real mode
handlers never execute on POWER9 and later CPUs.
So with the current use of the DMA windows and MMU improvements in
POWER9 and later, there is no point in duplicating the code.
The 32bit passed through devices may slow down but we do not have many
of these in practice. For example, with this applied, a 1Gbit ethernet
adapter still demostrates above 800Mbit/s of actual throughput.
This removes the real mode handlers from KVM and related code from
the powernv platform.
This updates the list of implemented hcalls in KVM-HV as the realmode
handlers are removed.
This changes ABI - kvmppc_h_get_tce() moves to the KVM module and
kvmppc_find_table() is static now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506053755.3820702-1-aik@ozlabs.ru
The LPID allocator init is changed to:
- use mmu_lpid_bits rather than hard-coding;
- use KVM_MAX_NESTED_GUESTS for nested hypervisors;
- not reserve the top LPID on POWER9 and newer CPUs.
The reserved LPID is made a POWER7/8-specific detail.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-3-npiggin@gmail.com
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
arch_randomize_brk() is only needed for hash on book3s/64, for other
platforms the one provided by the default mmap layout is good enough.
Move it to hash_utils.c and use randomize_page() like the generic one.
And properly opt out the radix case instead of making an assumption
on mmu_highuser_ssize.
Also change to a 32M range like most other architectures instead of 8M.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eafa4d18ec8ac7b98dd02b40181e61643707cc7c.1649523076.git.christophe.leroy@csgroup.eu
Select CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT and
remove arch/powerpc/mm/mmap.c
This change reuses the generic framework added by
commit 67f3977f80 ("arm64, mm: move generic mmap layout
functions to mm") without any functional change.
Comparison between powerpc implementation and the generic one:
- mmap_is_legacy() is identical.
- arch_mmap_rnd() does exactly the same allthough it's written
slightly differently.
- MIN_GAP and MAX_GAP are identical.
- mmap_base() does the same but uses STACK_RND_MASK which provides
the same values as stack_maxrandom_size().
- arch_pick_mmap_layout() is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/518f9def87d3c889d5958103e7463cf45a2f673d.1649523076.git.christophe.leroy@csgroup.eu
Do like most other architectures and provide randomisation also to
"legacy" memory mappings, by adding the random factor to
mm->mmap_base in arch_pick_mmap_layout().
See commit 8b8addf891 ("x86/mm/32: Enable full randomization on
i386 and X86_32") for all explanations and benefits of that mmap
randomisation.
At the moment, slice_find_area_bottomup() doesn't use mm->mmap_base
but uses the fixed TASK_UNMAPPED_BASE instead.
slice_find_area_bottomup() being used as a fallback to
slice_find_area_topdown(), it can't use mm->mmap_base
directly.
Instead of always using TASK_UNMAPPED_BASE as base address, leave
it to the caller. When called from slice_find_area_topdown()
TASK_UNMAPPED_BASE is used. Otherwise mm->mmap_base is used.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/417fb10dde828534c73a03138b49621d74f4e5be.1649523076.git.christophe.leroy@csgroup.eu
hugetlb_get_unmapped_area() is now identical to the
generic version if only RADIX is enabled, so move it
to slice.c and let it fallback on the generic one
when HASH MMU is not compiled in.
Do the same with arch_get_unmapped_area() and
arch_get_unmapped_area_topdown().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b5d9c124e82889e0cb115c150915a0c0d84eb960.1649523076.git.christophe.leroy@csgroup.eu
Use the generic version of arch_get_unmapped_area() which
is now available at all time instead of its copy
radix__arch_get_unmapped_area()
To allow that for PPC64, add arch_get_mmap_base() and
arch_get_mmap_end() macros.
Instead of setting mm->get_unmapped_area() to either
arch_get_unmapped_area() or generic_get_unmapped_area(),
always set it to arch_get_unmapped_area() and call
generic_get_unmapped_area() from there when radix is enabled.
Do the same with radix__arch_get_unmapped_area_topdown()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/393be1fa386446443682fdb74544d733f68ef3bb.1649523076.git.christophe.leroy@csgroup.eu
Since commit 555904d07e ("powerpc/8xx: MM_SLICE is not needed
anymore") only book3s/64 selects CONFIG_PPC_MM_SLICES.
Move slice.c into mm/book3s64/
Move necessary stuff in asm/book3s/64/slice.h and
remove asm/slice.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a0d74ef1966a5902b5fd4ac4b513a760a6d675a.1649523076.git.christophe.leroy@csgroup.eu
__FUNCTION__ exists only for backwards compatibility reasons with old
gcc versions. Replace it with __func__.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
[chleroy: Fixed parenthesis alignment]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210711084536.95394-1-dwaipayanray1@gmail.com
This defines and exports a platform specific custom vm_get_page_prot() via
subscribing ARCH_HAS_VM_GET_PAGE_PROT. While here, this also localizes
arch_vm_get_page_prot() as __vm_get_page_prot() and moves it near
vm_get_page_prot().
Link: https://lkml.kernel.org/r/20220414062125.609297-3-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Power SVM wants to allocate a swiotlb buffer that is not restricted to
low memory for the trusted hypervisor scheme. Consolidate the support
for this into the swiotlb_init interface by adding a new flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This reverts commit 602946ec2f.
If CONFIG_HIGHMEM is enabled, no highmem will be added with max_mapnr
set to max_low_pfn, see mem_init():
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
...
free_highmem_page();
}
Now that virt_addr_valid() has been fixed in the previous commit, we can
revert the change to max_mapnr.
Fixes: 602946ec2f ("powerpc: Set max_mapnr correctly")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Erhard F. <erhard_f@mailbox.org>
[mpe: Update change log to reflect series reordering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-2-mpe@ellerman.id.au
Merge yet more updates from Andrew Morton:
"This is the material which was staged after willystuff in linux-next.
Subsystems affected by this patch series: mm (debug, selftests,
pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
and selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
selftests: kselftest framework: provide "finished" helper
mm: madvise: MADV_DONTNEED_LOCKED
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
mm: generalize ARCH_HAS_FILTER_PGPROT
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
mm: warn on deleting redirtied only if accounted
mm/huge_memory: remove stale locking logic from __split_huge_pmd()
mm/huge_memory: remove stale page_trans_huge_mapcount()
mm/swapfile: remove stale reuse_swap_page()
mm/khugepaged: remove reuse_swap_page() usage
mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
mm: streamline COW logic in do_swap_page()
mm: slightly clarify KSM logic in do_swap_page()
mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
mm: optimize do_wp_page() for exclusive pages in the swapcache
mm/huge_memory: make is_transparent_hugepage() static
userfaultfd/selftests: enable hugetlb remap and remove event testing
selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
mm: enable MADV_DONTNEED for hugetlb mappings
kasan: disable LOCKDEP when printing reports
...
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some toolchains. This allows
powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to: Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen
Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel
Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren
Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim
Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan
Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal
Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine
Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan
McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain,
Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson
Almeida Filho, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=8r2c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
Patch series "mm/migration: Add trace events", v3.
This adds trace events for all migration scenarios including base page,
THP and HugeTLB.
This patch (of 3):
This adds two trace events for PMD based THP migration without split.
These events closely follow the implementation details like setting and
removing of PMD migration entries, which are essential operations for THP
migration. This moves CREATE_TRACE_POINTS into generic THP from powerpc
for these new trace events to be available on other platforms as well.
Link: https://lkml.kernel.org/r/1643368182-9588-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1643368182-9588-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We originally added asm-prototypes.h in commit 42f5b4cacd ("powerpc:
Introduce asm-prototypes.h"). It's purpose was for prototypes of C
functions that are only called from asm, in order to fix sparse
warnings about missing prototypes.
A few months later Nick added a different use case in
commit 4efca4ed05 ("kbuild: modversions for EXPORT_SYMBOL() for asm")
for C prototypes for exported asm functions. This is basically the
inverse of our original usage.
Since then we've added various prototypes to asm-prototypes.h for both
reasons, meaning we now need to unstitch it all.
Dispatch prototypes of C functions into relevant headers and keep
only the prototypes for functions defined in assembly.
For the time being, leave prom_init() there because moving it
into asm/prom.h or asm/setup.h conflicts with
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o
This will be fixed later by untaggling asm/pci.h and asm/prom.h
or by renaming the function in shadowrom.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu
Since commit 46ddcb3950 ("powerpc/mm: Show if a bad page fault on data
is read or write.") we use page_fault_is_write(regs->dsisr) in
__bad_page_fault() to determine if the fault is for a read or write, and
change the message printed accordingly.
But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data
Storage Interrupt Status Register) to a useful value. All ISA versions
from v2.03 through v3.1 specify that the Data Segment Interrupt sets
DSISR "to an undefined value". As far as I can see there's no mention of
SLB faults setting DSISR in any BookIV content either.
This manifests as accesses that should be a read being incorrectly
reported as writes, for example, using the xmon "dump" command:
0:mon> d 0x5deadbeef0000000
5deadbeef0000000
[359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000
[359526.415611][ C6] Faulting instruction address: 0xc00000000010a300
cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400]
pc: c00000000010a300: mread+0x90/0x190
If we disassemble the PC, we see a load instruction:
0:mon> di c00000000010a300
c00000000010a300 89490000 lbz r10,0(r9)
We can also see in exceptions-64s.S that the data_access_slb block
doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So
the value we're using to determine if the fault is a read/write is some
stale value in pt_regs from a previous page fault.
Rework the printing logic to separate the SLB fault case out, and only
print read/write in the cases where we can determine it.
The result looks like eg:
0:mon> d 0x5deadbeef0000000
5deadbeef0000000
[ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000
[ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0
cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]
0:mon> d 0
0000000000000000
[ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000
[ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0
cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]
Fixes: 46ddcb3950 ("powerpc/mm: Show if a bad page fault on data is read or write.")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20220222113449.319193-1-mpe@ellerman.id.au
Move the check for the actual pgmap types that need the free at refcount
one behavior into the out of line helper, and thus avoid the need to
pull memremap.h into mm.h.
Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Executing node_set_online() when nid = NUMA_NO_NODE results in an
undefined behavior. node_set_online() will call node_set_state(), into
__node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up
doing a negative shift operation inside
arch/powerpc/include/asm/bitops.h. This potential UB was detected
running a kernel with CONFIG_UBSAN.
The behavior was introduced by commit 10f78fd0da ("powerpc/numa: Fix a
regression on memoryless node 0"), where the check for nid > 0 was
removed to fix a problem that was happening with nid = 0, but the result
is that now we're trying to online NUMA_NO_NODE nids as well.
Checking for nid >= 0 will allow node 0 to be onlined while avoiding
this UB with NUMA_NO_NODE.
Fixes: 10f78fd0da ("powerpc/numa: Fix a regression on memoryless node 0")
Reported-by: Ping Fang <pifang@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224182312.1012527-1-danielhb413@gmail.com
Hash faults are not resoved in NMI context, instead causing the access
to fail. This is done because perf interrupts can get backtraces
including walking the user stack, and taking a hash fault on those could
deadlock on the HPTE lock if the perf interrupt hits while the same HPTE
lock is being held by the hash fault code. The user-access for the stack
walking will notice the access failed and deal with that in the perf
code.
The reason to allow perf interrupts in is to better profile hash faults.
The problem with this is any hash fault on a kernel access that happens
in NMI context will crash, because kernel accesses must not fail.
Hard lockups, system reset, machine checks that access vmalloc space
including modules and including stack backtracing and symbol lookup in
modules, per-cpu data, etc could all run into this problem.
Fix this by disallowing perf interrupts in the hash fault code (the
direct hash fault is covered by MSR[EE]=0 so the PMI disable just needs
to extend to the preload case). This simplifies the tricky logic in hash
faults and perf, at the cost of reduced profiling of hash faults.
perf can still latch addresses when interrupts are disabled, it just
won't get the stack trace at that point, so it would still find hot
spots, just sometimes with confusing stack chains.
An alternative could be to allow perf interrupts here but always do the
slowpath stack walk if we are in nmi context, but that slows down all
perf interrupt stack walking on hash though and it does not remove as
much tricky code.
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204035348.545435-1-npiggin@gmail.com
commit: d9c2340052 ("Do not depend on MAX_ORDER when grouping pages by mobility")
introduced pageblock_order which will be used to group pages better.
The kernel now groups pages based on the value of HPAGE_SHIFT. Hence HPAGE_SHIFT
should be set before we call set_pageblock_order.
set_pageblock_order happens early in the boot and default hugetlb page size
should be initialized before that to compute the right pageblock_order value.
Currently, default hugetlbe page size is set via arch_initcalls which happens
late in the boot as shown via the below callstack:
[c000000007383b10] [c000000001289328] hugetlbpage_init+0x2b8/0x2f8
[c000000007383bc0] [c0000000012749e4] do_one_initcall+0x14c/0x320
[c000000007383c90] [c00000000127505c] kernel_init_freeable+0x410/0x4e8
[c000000007383da0] [c000000000012664] kernel_init+0x30/0x15c
[c000000007383e10] [c00000000000cf14] ret_from_kernel_thread+0x5c/0x64
and the pageblock_order initialization is done early during the boot.
[c0000000018bfc80] [c0000000012ae120] set_pageblock_order+0x50/0x64
[c0000000018bfca0] [c0000000012b3d94] sparse_init+0x188/0x268
[c0000000018bfd60] [c000000001288bfc] initmem_init+0x28c/0x328
[c0000000018bfe50] [c00000000127b370] setup_arch+0x410/0x480
[c0000000018bfed0] [c00000000127401c] start_kernel+0xb8/0x934
[c0000000018bff90] [c00000000000d984] start_here_common+0x1c/0x98
delaying default hugetlb page size initialization implies the kernel will
initialize pageblock_order to (MAX_ORDER - 1) which is not an optimal
value for mobility grouping. IIUC we always had this issue. But it was not
a problem for hash translation mode because (MAX_ORDER - 1) is the same as
HUGETLB_PAGE_ORDER (8) in the case of hash (16MB). With radix,
HUGETLB_PAGE_ORDER will be 5 (2M size) and hence pageblock_order should be
5 instead of 8.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211065215.101767-1-aneesh.kumar@linux.ibm.com
The book3s/32 MMU doesn't support per page execution protection and
doesn't support RO protection for kernel pages.
However, on the 603 which implements software loaded TLBs, execution
protection is honored by the TLB Miss handler which doesn't load
Instruction TLB for non executable pages. And RO protection is
honored by clearing the C bit for RO pages, leading to DSI.
So on the 603, STRICT_MODULE_RWX is possible without much effort.
Don't disable STRICT_MODULE_RWX on book3s/32 and print a warning
in case STRICT_MODULE_RWX has been selected and the platform has
a Hardware HASH MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e6162f334167e75f1140082932e3a354b16daba.1642413973.git.christophe.leroy@csgroup.eu
set_memory_attr() was implemented by commit 4d1755b6a7 ("powerpc/mm:
implement set_memory_attr()") because the set_memory_xx() couldn't
be used at that time to modify memory "on the fly" as explained it
the commit.
But set_memory_attr() uses set_pte_at() which leads to warnings when
CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for
updating existing page table entries.
The check could be bypassed by using __set_pte_at() instead,
as it was the case before commit c988cfd38e ("powerpc/32:
use set_memory_attr()") but since commit 9f7853d760 ("powerpc/mm:
Fix set_memory_*() against concurrent accesses") it is now possible
to use set_memory_xx() functions to update page table entries
"on the fly" because the update is now atomic.
For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT.
Add set_memory_np() and set_memory_p() for that.
Replace all uses of set_memory_attr() by the relevant set_memory_xx()
and remove set_memory_attr().
Fixes: c988cfd38e ("powerpc/32: use set_memory_attr()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Depends-on: 9f7853d760 ("powerpc/mm: Fix set_memory_*() against concurrent accesses")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
Commit 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
included a spin_lock() to change_page_attr() in order to
safely perform the three step operations. But then
commit 9f7853d760 ("powerpc/mm: Fix set_memory_*() against
concurrent accesses") modify it to use pte_update() and do
the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217
[ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0
[ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523
[ 15.373350] Workqueue: events do_free_init
[ 15.377615] Call Trace:
[ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable)
[ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4
[ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0
[ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8
[ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94
[ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134
[ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8
[ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c
[ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8
[ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94
[ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8
[ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8
[ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210
[ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic
and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers
anymore. Because all platforms have different combination of bits, it
is not easy to use those bits directly. But all have the
_PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare
two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you
know which bit gets cleared and which bit get set when changing exec
permission.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/
Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.1640344012.git.christophe.leroy@csgroup.eu
As reported by sparse:
arch/powerpc/mm/ptdump/hashpagetable.c:264:29: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:265:49: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: got restricted __be64 [usertype] v
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: got restricted __be64 [usertype] r
The values returned by plpar_pte_read_4() are CPU endian, not __be64, so
assigning them to struct hash_pte confuses sparse. As a minimal fix open
code a struct to hold the values with CPU endian types.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202053039.691917-1-mpe@ellerman.id.au
- A series of bpf fixes, including an oops fix and some codegen fixes.
- Fix a regression in syscall_get_arch() for compat processes.
- Fix boot failure on some 32-bit systems with KASAN enabled.
- A couple of other build/minor fixes.
Thanks to: Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa, Johan Almbladh,
Maxime Bizon, Naveen N. Rao, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=KjWT
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A series of bpf fixes, including an oops fix and some codegen fixes.
- Fix a regression in syscall_get_arch() for compat processes.
- Fix boot failure on some 32-bit systems with KASAN enabled.
- A couple of other build/minor fixes.
Thanks to Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa,
Johan Almbladh, Maxime Bizon, Naveen N. Rao, and Nicholas Piggin.
* tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Mask SRR0 before checking against the masked NIP
powerpc/perf: Only define power_pmu_wants_prompt_pmi() for CONFIG_PPC64
powerpc/32s: Fix kasan_init_region() for KASAN
powerpc/time: Fix build failure due to do_hard_irq_enable() on PPC32
powerpc/audit: Fix syscall_get_arch()
powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06
tools/bpf: Rename 'struct event' to avoid naming conflict
powerpc/bpf: Update ldimm64 instructions during extra pass
powerpc32/bpf: Fix codegen for bpf-to-bpf calls
bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack()
It has been reported some configuration where the kernel doesn't
boot with KASAN enabled.
This is due to wrong BAT allocation for the KASAN area:
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m
3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m
4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m
A BAT must have both virtual and physical addresses alignment matching
the size of the BAT. This is not the case for BAT 4 above.
Fix kasan_init_region() by using block_size() function that is in
book3s32/mmu.c. To be able to reuse it here, make it non static and
change its name to bat_block_size() in order to avoid name conflict
with block_size() defined in <linux/blkdev.h>
Also reuse find_free_bat() to avoid an error message from setbat()
when no BAT is available.
And allocate memory outside of linear memory mapping to avoid
wasting that precious space.
With this change we get correct alignment for BATs and KASAN shadow
memory is allocated outside the linear memory space.
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw
3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw
4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw
Fixes: 7974c47326 ("powerpc/32s: Implement dedicated kasan_init_region()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
Since commit 4064b98270 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:
flags & FAULT_FLAG_ALLOW_RETRY
So just remove it.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10
or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated assembler.
- Many other small features and fixes.
Thanks to: Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig,
Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren,
Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent
Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju,
Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei
Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean
Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang
wangx, Yang Guang.
-----BEGIN PGP SIGNATURE-----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=BxhQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom Command
DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C
and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt controllers,
STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe,
Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC,
Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in preparation
to move to validating DTB files directly (instead of intermediate YAML
representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes
-----BEGIN PGP SIGNATURE-----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=2g8v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
The llvm integrated assembler does not recognise the ISA 2.05 tlbiel
version. Work around it by switching to .long when an old arch level
detected.
Signed-off-by: Daniel Axtens <dja@axtens.net>
[aik: did "Eventually do this more smartly"]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-7-aik@ozlabs.ru
The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).
LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
Some functions defined in 'arch/powerpc/mm' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-4-nick.child@ibm.com
In note_prot_wx() we bail out without reporting anything if
CONFIG_PPC_DEBUG_WX is disabled.
But CONFIG_PPC_DEBUG_WX was removed in the conversion to generic ptdump,
we now need to use CONFIG_DEBUG_WX instead.
Fixes: e084728393 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20211203124112.2912562-1-mpe@ellerman.id.au
pmd_huge() is defined to false when HUGETLB_PAGE is not configured, but
the vmap code still installs huge PMDs. This leads to false bad PMD
errors when vunmapping because it is not seen as a huge PTE, and the bad
PMD check catches it. The end result may not be much more serious than
some bad pmd warning messages, because the pmd_none_or_clear_bad() does
what we wanted and clears the huge PTE anyway.
Fix this by checking pmd_is_leaf(), which checks for a PTE regardless of
config options. The whole huge/large/leaf stuff is a tangled mess but
that's kernel-wide and not something we can improve much in arch/powerpc
code.
pmd_page(), pud_page(), etc., called by vmalloc_to_page() on huge vmaps
can similarly trigger a false VM_BUG_ON when CONFIG_HUGETLB_PAGE=n, so
those checks are adjusted. The checks were added by commit d6eacedd1f
("powerpc/book3s: Use config independent helpers for page table walk"),
while implementing a similar fix for other page table walking functions.
Fixes: d909f9109c ("powerpc/64s/radix: Enable HAVE_ARCH_HUGE_VMAP")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216103342.609192-1-npiggin@gmail.com
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_chosen() to be called directly and use libfdt.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-2-robh@kernel.org
copy_inst_from_kernel_nofault() uses copy_from_kernel_nofault() to
copy one or two 32bits words. This means calling an out-of-line
function which itself calls back copy_from_kernel_nofault_allowed()
then performs a generic copy with loops.
Rewrite copy_inst_from_kernel_nofault() to do everything at a
single place and use __get_kernel_nofault() directly to perform
single accesses without loops.
Allthough the generic function uses pagefault_disable(), it is not
required on powerpc because do_page_fault() bails earlier when a
kernel mode fault happens on a kernel address.
As the function has now become very small, inline it.
With this change, on an 8xx the time spent in the loop in
ftrace_replace_code() is reduced by 23% at function tracer activation
and 27% at nop tracer activation.
The overall time to activate function tracer (measured with shell
command 'time') is 570ms before the patch and 470ms after the patch.
Even vmlinux size is reduced (by 152 instruction).
Before the patch:
00000018 <copy_inst_from_kernel_nofault>:
18: 94 21 ff e0 stwu r1,-32(r1)
1c: 7c 08 02 a6 mflr r0
20: 38 a0 00 04 li r5,4
24: 93 e1 00 1c stw r31,28(r1)
28: 7c 7f 1b 78 mr r31,r3
2c: 38 61 00 08 addi r3,r1,8
30: 90 01 00 24 stw r0,36(r1)
34: 48 00 00 01 bl 34 <copy_inst_from_kernel_nofault+0x1c>
34: R_PPC_REL24 copy_from_kernel_nofault
38: 2c 03 00 00 cmpwi r3,0
3c: 40 82 00 0c bne 48 <copy_inst_from_kernel_nofault+0x30>
40: 81 21 00 08 lwz r9,8(r1)
44: 91 3f 00 00 stw r9,0(r31)
48: 80 01 00 24 lwz r0,36(r1)
4c: 83 e1 00 1c lwz r31,28(r1)
50: 38 21 00 20 addi r1,r1,32
54: 7c 08 03 a6 mtlr r0
58: 4e 80 00 20 blr
After the patch (before inlining):
00000018 <copy_inst_from_kernel_nofault>:
18: 3d 20 b0 00 lis r9,-20480
1c: 7c 04 48 40 cmplw r4,r9
20: 7c 69 1b 78 mr r9,r3
24: 41 80 00 14 blt 38 <copy_inst_from_kernel_nofault+0x20>
28: 81 44 00 00 lwz r10,0(r4)
2c: 38 60 00 00 li r3,0
30: 91 49 00 00 stw r10,0(r9)
34: 4e 80 00 20 blr
38: 38 60 ff de li r3,-34
3c: 4e 80 00 20 blr
40: 38 60 ff f2 li r3,-14
44: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add clang workaround, with version check as suggested by Nathan]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d5b12183d5176dd702d29ad94c39c384e51c78f.1638208156.git.christophe.leroy@csgroup.eu
Today we have the following IBATs allocated:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m
5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m
6: -
7: -
The two 128K should be a single 256K instead.
When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.
Instead, align the top to 128Kbytes so that the function directly
allocates a 256Kbytes last block:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m
5: -
6: -
7: -
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu
This adds KUAP support to 40x. This is done by checking
the content of SPRN_PID at the time user pgtable is loaded.
40x doesn't have KUEP, but KUAP implies KUEP because when the
PID doesn't match the page's PID, the page cannot be read nor
executed.
So KUEP is now automatically selected when KUAP is selected and
disabled when KUAP is disabled.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aaefa91897ddc42ac11019dc0e1d1a525bd08e90.1634627931.git.christophe.leroy@csgroup.eu
On booke/40x we don't have segments like book3s/32.
On booke/40x we don't have access protection groups like 8xx.
Use the PID register to provide user access protection.
Kernel address space can be accessed with any PID.
User address space has to be accessed with the PID of the user.
User PID is always not null.
Everytime the kernel is entered, set PID register to 0 and
restore PID register when returning to user.
Everytime kernel needs to access user data, PID is restored
for the access.
In TLB miss handlers, check the PID and bail out to data storage
exception when PID is 0 and accessed address is in user space.
Note that also forbids execution of user text by kernel except
when user access is unlocked. But this shouldn't be a problem
as the kernel is not supposed to ever run user text.
This patch prepares the infrastructure but the real activation of KUAP
is done by following patches for each processor type one by one.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5d65576a8e31e9480415785a180c92dd4e72306d.1634627931.git.christophe.leroy@csgroup.eu
In order to reuse it on booke/4xx, move KUAP
setup routine out of 8xx.c
Make them usable on SMP by removing the __init tag
as it is called for each CPU.
And use __prevent_user_access() instead of hard
coding initial lock.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae35eec3426509efc2b8ae69586c822e2fe2642a.1634627931.git.christophe.leroy@csgroup.eu
Deactivating KUEP at boot time is unrelevant for PPC32 and BOOK3E/64.
Remove it.
It allows to refactor setup_kuep() via a __weak function
that only PPC64s will overide for now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix CONFIG_PPC_BOOKS_64 -> CONFIG_PPC_BOOK3S_64 typo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4c36df18b41c988c4512f45d96220486adbe4c99.1634627931.git.christophe.leroy@csgroup.eu
Calling 'mfsr' to get the content of segment registers is heavy,
in addition it requires clearing of the 'reserved' bits.
In order to avoid this operation, save it in mm context and in
thread struct.
The saved sr0 is the one used by kernel, this means that on
locking entry it can be used as is.
For unlocking, the only thing to do is to clear SR_NX.
This improves null_syscall selftest by 12 cycles, ie 4%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02baf2ed8f09bad910dfaeeb7353b2ae6830525.1634627931.git.christophe.leroy@csgroup.eu
When interrupt and syscall entries where converted to C, KUEP locking
and unlocking was also converted. It improved performance by unrolling
the loop, and allowed easily implementing boot time deactivation of
KUEP.
However, null_syscall selftest shows that KUEP is still heavy
(361 cycles with KUEP, 212 cycles without).
A way to improve more is to group 'mtsr's together, instead of
repeating 'addi' + 'mtsr' several times.
In order to do that, more registers need to be available. In C, GCC
will always be able to provide the requested number of registers, but
at the cost of saving some data on the stack, which is counter
performant here.
So let's do it in assembly, when we have full control of which
register can be used. It also has the advantage of locking earlier
and unlocking later and it helps GCC generating less tricky code.
The only drawback is to make boot time deactivation less straight
forward and require 'hand' instruction patching.
Group 'mtsr's by 4.
With this change, null_syscall selftest reports 336 cycles. Without
the change it was 361 cycles, that's a 7% reduction.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/115cb279e9b9948dfd93a065e047081c59e3a2a6.1634627931.git.christophe.leroy@csgroup.eu
On the 8xx, there is absolutely no runtime impact with KUEP. Protection
against execution of user code in kernel mode is set up at boot time
by configuring the groups with contain all user pages as having swapped
protection rights, in extenso EX for user and NA for supervisor.
Configure KUEP at startup and force selection of CONFIG_PPC_KUEP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2129e86944323ffe9ed07fffbeafdfd2e363690a.1634627931.git.christophe.leroy@csgroup.eu
This reverts commit 1791ebd131.
setup_kup() was inlined to manage conflict between PPC32 marking
setup_{kuap/kuep}() __init and PPC64 not marking them __init.
But in fact PPC32 has removed the __init mark for all but 8xx
in order to properly handle SMP.
In order to make setup_kup() grow a bit, revert the commit
mentioned above but remove __init for 8xx as well so that
we don't have to mark setup_kup() as __ref.
Also switch the order so that KUAP is initialised before KUEP
because on the 40x, KUEP will depend on the activation of KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7691088fd0994ee3c8db6298dc8c00259e3f6a7f.1634627931.git.christophe.leroy@csgroup.eu
Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves
128kB kernel image size (90kB text) on powernv_defconfig minus KVM,
350kB on pseries_defconfig minus KVM, 40kB on a tiny config.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG.
Fix radix_enabled() use in setup_initial_memory_limit(). Add some
stubs to reduce number of ifdefs.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
This adds Kconfig selection which allows 64s hash MMU support to be
disabled. It can be disabled if radix support is enabled, the minimum
supported CPU type is POWER9 (or higher), and KVM is not selected.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-17-npiggin@gmail.com
To avoid any functional changes to radix paths when building with hash
MMU support disabled (and CONFIG_PPC_MM_SLICES=n), always define the
arch get_unmapped_area calls on 64s platforms.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-16-npiggin@gmail.com
There are a few places that require MMU_FTR_HPTE_TABLE to be set even
when running in radix mode. Fix those up.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-15-npiggin@gmail.com
mmu_linear_psize is only set at boot once on 64e, is not necessarily
the correct size of the linear map pages, and is never used anywhere.
Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain the extern, so we can use IS_ENABLED() for related code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-14-npiggin@gmail.com
memremap_compat_align is only relevant when ZONE_DEVICE is selected.
ZONE_DEVICE depends on ARCH_HAS_PTE_DEVMAP, which is only selected
by PPC_BOOK3S_64.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-13-npiggin@gmail.com
The radix code uses some of the psize variables. Move the common
ones from hash_utils.c to pgtable.c.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-10-npiggin@gmail.com
In preparation for making hash MMU support configurable, move THP
trace point function definitions out of an otherwise hash-specific
file.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-8-npiggin@gmail.com
slb.c is hash-specific SLB management, but do_bad_slb_fault deals with
segment interrupts that occur with radix MMU as well.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-5-npiggin@gmail.com
The pseries platform does not use the native hash code but the PAPR
virtualised hash interfaces, so remove PPC_HASH_MMU_NATIVE.
This requires moving tlbiel code from hash_native.c to hash_utils.c.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-4-npiggin@gmail.com
PPC_NATIVE now only controls the native HPT code, so rename it to be
more descriptive. Restrict it to Book3S only.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-3-npiggin@gmail.com
================================================================================
UBSAN: shift-out-of-bounds in arch/powerpc/mm/kasan/book3s_32.c:22:23
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[c214be60] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[c214be80] [c0b99288] ubsan_epilogue+0x10/0x5c
[c214be90] [c0b98fe0] __ubsan_handle_shift_out_of_bounds+0x94/0x138
[c214bf00] [c1c0f010] kasan_init_region+0xd8/0x26c
[c214bf30] [c1c0ed84] kasan_init+0xc0/0x198
[c214bf70] [c1c08024] setup_arch+0x18/0x54c
[c214bfc0] [c1c037f0] start_kernel+0x90/0x33c
[c214bff0] [00003610] 0x3610
================================================================================
This happens when the directly mapped memory is a power of 2.
Fix it by checking the shift and set the result to 0 when shift is -1
Fixes: 7974c47326 ("powerpc/32s: Implement dedicated kasan_init_region()")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215169
Link: https://lore.kernel.org/r/15cbc3439d4ad988b225e2119ec99502a5cc6ad3.1638261744.git.christophe.leroy@csgroup.eu
Allow the LPID bit width and partition table size to be set at runtime
from the device tree.
Move the PID bit width detection into the same place.
KVM does not support using the extra bits yet, this is mainly required
to get the PTCR register values correct (so KVM will run but it will
not allocate > 4096 LPIDs).
OPAL firmware provides this property for POWER10 CPUs since skiboot
commit 9b85f7d961f2 ("hdata: add mmu-pid-bits and mmu-lpid-bits for
POWER10 CPUs").
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211129030915.1888332-1-npiggin@gmail.com
We have wrong units on BAT's sizes (G instead of M, M instead of ...)
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4G Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2G Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1G Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512M Kernel x m
4: 0xc0780000-0xc079ffff 0x00780000 128M Kernel x m
5: 0xc07a0000-0xc07bffff 0x007a0000 128M Kernel x m
6: -
7: -
This is because pt_dump_size() expects a size in Kbytes but
bat_show_603() gives the size in bytes.
To avoid risk of confusion, change pt_dump_size() to take bytes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f16c30f5c9185a63335322cf1a8b22f189d335ef.1637922595.git.christophe.leroy@csgroup.eu
Building with W=1 we see a warning:
linux/arch/powerpc/mm/nohash/fsl_book3e.c:63:15: error: no previous prototype for ‘tlbcam_sz’
tlbcam_sz() is not used outside this file, so we can make it static.
However it's only used inside #ifdef CONFIG_PPC32, so move it within
that ifdef, otherwise we would get a defined but not used error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-4-mpe@ellerman.id.au
Today, patch_instruction() assumes that it is called exclusively on
valid addresses, and only checks that it is not called on an init
address after init section has been freed.
Improve verification by calling kernel_text_address() instead.
kernel_text_address() already includes a verification of
initmem release.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc683d499a411730504b132a924de0ccc2ef1f79.1636971137.git.christophe.leroy@csgroup.eu
This register controls supervisor SPR modifications, and as such is only
relevant for KVM. KVM always sets AMOR to ~0 on guest entry, and never
restores it coming back out to the host, so it can be kept constant and
avoid the mtSPR in KVM guest entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-10-npiggin@gmail.com
Commit 52bda69ae8 ("powerpc/fsl_booke: Tell map_mem_in_cams() if
init is done") was supposed to just add an additional parameter to
map_mem_in_cams() and always set it to 'true' at that time.
But a few call sites were messed up. Fix them.
Fixes: 52bda69ae8 ("powerpc/fsl_booke: Tell map_mem_in_cams() if init is done")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d319f2a9367d4d08fd2154e506101bd5f100feeb.1636967119.git.christophe.leroy@csgroup.eu
In case the FORM2 distance table from firmware is not the expected size,
there is fallback code that just populates the lookup table as local vs
remote.
However it then continues on to use the distance table. Fix.
Fixes: 1c6b5a7e74 ("powerpc/pseries: Add support for FORM2 associativity")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109064900.2041386-2-npiggin@gmail.com
The name of the local variable holding the "form2" property address
conflicts with the numa_distance_table global.
This patch does 's/numa_dist_table/form2_distances/g' over the function,
which also renames numa_dist_table_length to form2_distances_length.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109064900.2041386-1-npiggin@gmail.com
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
We can specify the number of hugepages to allocate at boot. But the
hugepages is balanced in all nodes at present. In some scenarios, we
only need hugepages in one node. For example: DPDK needs hugepages
which are in the same node as NIC.
If DPDK needs four hugepages of 1G size in node1 and system has 16 numa
nodes we must reserve 64 hugepages on the kernel cmdline. But only four
hugepages are used. The others should be free after boot. If the
system memory is low(for example: 64G), it will be an impossible task.
So extend the hugepages parameter to support specifying hugepages on a
specific node. For example add following parameter:
hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zhenguo Yao <yaozhenguo1@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ARCH_SUPPORTS_DEBUG_PAGEALLOC is not selected, the user can
still select CONFIG_DEBUG_PAGEALLOC in which case __kernel_map_pages()
is provided by mm/page_poison.c
So only define __kernel_map_pages() when both
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC and CONFIG_DEBUG_PAGEALLOC
are defined.
Fixes: 68b44f94d6 ("powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/971b69739ff4746252e711a9845210465c023a9e.1635425947.git.christophe.leroy@csgroup.eu
Building tqm8541_defconfig results in:
arch/powerpc/mm/nohash/fsl_book3e.c: In function 'settlbcam':
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: error: '_PAGE_BAP_SX' undeclared (first use in this function)
126 | TLBCAM[index].MAS3 |= (flags & _PAGE_BAP_SX) ? MAS3_SX : 0;
| ^~~~~~~~~~~~
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [scripts/Makefile.build:277: arch/powerpc/mm/nohash/fsl_book3e.o] Error 1
make[2]: *** [scripts/Makefile.build:540: arch/powerpc/mm/nohash] Error 2
make[1]: *** [scripts/Makefile.build:540: arch/powerpc/mm] Error 2
make: *** [Makefile:1868: arch/powerpc] Error 2
This is because _PAGE_BAP_SX is not defined when using 32 bits PTE.
Now that _PAGE_EXEC contains both _PAGE_BAP_SX and _PAGE_BAP_UX, it can be used instead.
Fixes: 01116e6e98 ("powerpc/fsl_booke: Take exec flag into account when setting TLBCAMs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91a0235e7f2a85308b84aa5b9efd8d022e2b899a.1635226743.git.christophe.leroy@csgroup.eu
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Long time ago we had a config item called STRICT_MM_TYPECHECKS
to build the kernel with pte_t defined as a structure in order
to perform additional build checks or build it with pte_t
defined as a simple type in order to get simpler generated code.
Commit 670eea9241 ("powerpc/mm: Always use STRICT_MM_TYPECHECKS")
made the struct based definition the only one, considering that the
generated code was similar in both cases.
That's right on ppc64 because the ABI is such that the content of a
struct having a single simple type element is passed as register,
but on ppc32 such a structure is passed via the stack like any
structure.
Simple test function:
pte_t test(pte_t pte)
{
return pte;
}
Before this patch we get
c00108ec <test>:
c00108ec: 81 24 00 00 lwz r9,0(r4)
c00108f0: 91 23 00 00 stw r9,0(r3)
c00108f4: 4e 80 00 20 blr
So, for PPC32, restore the simple type behaviour we got before
commit 670eea9241, but instead of adding a config option to
activate type check, do it when __CHECKER__ is set so that type
checking is performed by 'sparse' and provides feedback like:
arch/powerpc/mm/pgtable.c:466:16: warning: incorrect type in return expression (different base types)
arch/powerpc/mm/pgtable.c:466:16: expected unsigned long
arch/powerpc/mm/pgtable.c:466:16: got struct pte_t [usertype] x
With this patch we now get
c0010890 <test>:
c0010890: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Define STRICT_MM_TYPECHECKS rather than repeating the condition]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c904599f33aaf6bb7ee2836a9ff8368509e0d78d.1631887042.git.christophe.leroy@csgroup.eu
Reorganise TLBCAM allocation so that when STRICT_KERNEL_RWX is
enabled, TLBCAMs are allocated such that readonly memory uses
different TLBCAMs.
This results in an allocation looking like:
Memory CAM mapping: 4/4/4/1/1/1/1/16/16/16/64/64/64/256/256 Mb, residual: 256Mb
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ca169bc288261a0e0558712f979023c3a960ebb.1634292136.git.christophe.leroy@csgroup.eu
Avoid switching to AS1 when reloading TLBCAM after init for
STRICT_KERNEL_RWX.
When we setup AS1 we expect the entire accessible memory to be mapped
through one entry, this is not the case anymore at the end of init.
We are not changing the size of TLBCAMs, only flags, so no need to
switch to AS1.
So change loadcam_multi() to not switch to AS1 when the given
temporary tlb entry in 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9d517fbfbc940f56103c46b323f6eb8f4485571.1634292136.git.christophe.leroy@csgroup.eu
Don't force MAS3_SX and MAS3_UX at all time. Take into account the
exec flag.
While at it, fix a couple of closeby style problems (indent with space
and unnecessary parenthesis), it keeps more readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5467044e59f27f9fcf709b9661779e3ce5f784f6.1634292136.git.christophe.leroy@csgroup.eu
We have a myriad of CONFIG symbols around different variants
of BOOKEs, which would be worth tidying up one day.
But at least, make file names and CONFIG option match:
We have CONFIG_FSL_BOOKE and CONFIG_PPC_FSL_BOOK3E.
fsl_booke.c is selected by and only by CONFIG_PPC_FSL_BOOK3E.
So rename it fsl_book3e to reduce confusion.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5dc871db1f67739319bec11f049ca450da1c13a2.1634292136.git.christophe.leroy@csgroup.eu
The page_alloc.c code will call into __kernel_map_pages() when
DEBUG_PAGEALLOC is configured and enabled.
As the implementation assumes hash, this should crash spectacularly if
not for a bit of luck in __kernel_map_pages(). In this function
linear_map_hash_count is always zero, the for loop exits without doing
any damage.
There are no other platforms that determine if they support
debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to
do that, this change turns the map/unmap into a noop when in radix
mode and prints a warning once.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Reformat if per Christophe's suggestion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au
max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.
It must only include lowmem PFNs, like other architectures.
Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu
Commit 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba9 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h
Fixes: 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmEyHTYTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDo3D/9aXMVP2wsEMNB0XhTiJ1UUdi311Uq9
PvkAaGZH14ZqZLVigeiD3gt6YzTH0cEuGj6qgwsJrPDjF8FESnMbBsprMLr5/qE1
itWRGMAMCFaeTcB9ogYVJkzwg6RN2ZgIqoq4NVswNSXoAQGWb+1bvXq3RnXXNuGR
TQmLL02poNC6nX0YbRaQoT1Xx4nfUTiKHhU+Aok9uOCMJIyYZVATR6Qafb7/j7tO
UvjwOHztbu84lcJOGmSnw4LcmwNORLuP9IwR0r+O1M3ijEZqDo9TPkvtSz8HZwjU
mxdJwhrUmN0euMcghuiFxW+1XG2eM49ugsdJugiezG2RaIijbIp0nAIvdeaKAgT1
OSSwvWCQ0fkTPyLXE+O6tVqMhlUMdqQlRcyNwmN9svIip9VnwGNq3vA4ePlJm6Fi
i0i/tLqVNlJwFokZ7blW5g8SRgGRuFfXd5XUYLFvy5Teez+/7b1mW95gPQZSJ8kV
Tbx2e0nHAPX4hCAxJ1AB3/zTlnjY+4+WJ9bD5XdgXkeVE8PPh1BEkulhMi1R1OMj
57D1W6OgsBu/Pze78wjAvwO8+NAb1T/2mv2Bd/LY6Q+7hNDqOOhuajyBTxbH41FG
sqx5bKjKOwgTybfV9A0Eo0e4FQBX07yXltBFHaPlyA4sOsIhM59+PxNrEwN1eZrQ
LVVsdBXg8pHxrw==
=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
Merge our fixes branch into next.
That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c.
Between cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when
creating the IPIs"), which moved request_irq() out of xive_init_ipis(),
and 17df41fec5 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added
IRQF_NO_DEBUG to that request_irq() call, which has now moved.
Since the conversion to generic ptdump we see crashes on 64-bit:
BUG: Unable to handle kernel data access on read at 0xc0eeff7f00000000
Faulting instruction address: 0xc00000000045e5fc
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP __walk_page_range+0x2bc/0xce0
LR __walk_page_range+0x240/0xce0
Call Trace:
__walk_page_range+0x240/0xce0 (unreliable)
walk_page_range_novma+0x74/0xb0
ptdump_walk_pgd+0x98/0x170
ptdump_check_wx+0x88/0xd0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x1a0
ret_from_kernel_thread+0x5c/0x64
What's happening is that have walked off the end of the kernel page
tables, and started dereferencing junk values.
That happens because we initialised the ptdump_range to span all the way
up to 0xffffffffffffffff:
static struct ptdump_range ptdump_range[] __ro_after_init = {
{TASK_SIZE_MAX, ~0UL},
But the kernel page tables don't span that far. So on 64-bit set the end
of the range to be the address immediately past the end of the kernel
page tables, to limit the page table walk to valid addresses.
Fixes: e084728393 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210831135151.886620-1-mpe@ellerman.id.au
Currently, a debug message gets printed every time an attempt to
add(remove) a CPU. However this is redundant if the CPU is already added
(removed) from the node.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-4-srikar@linux.vnet.ibm.com
Convert the remaining printk to pr_xxx
One advantage would be all prints will now have prefix "numa:" from
pr_fmt().
[ convert printk(KERN_ERR) to pr_warn : Suggested by Laurent Dufour ]
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Rebase onto powerpc/next, s/WARNING/Warning/]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-3-srikar@linux.vnet.ibm.com
powerpc supported numa=debug which is not documented. This option was
used to print early debug output. However something more flexible can be
achieved by using CONFIG_DYNAMIC_DEBUG.
Hence drop dbg (and numa=debug) in favour of pr_debug
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Rebase on to powerpc/next form2 affinity changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-2-srikar@linux.vnet.ibm.com
- Fix random crashes on some 32-bit CPUs by adding isync() after locking/unlocking KUEP
- Fix intermittent crashes when loading modules with strict module RWX
- Fix a section mismatch introduce by a previous fix.
Thanks to: Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo Opsfelder Araújo,
Nathan Chancellor, Stan Johnson.
-----BEGIN PGP SIGNATURE-----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=K2B0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix random crashes on some 32-bit CPUs by adding isync() after
locking/unlocking KUEP
- Fix intermittent crashes when loading modules with strict module RWX
- Fix a section mismatch introduce by a previous fix.
Thanks to Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo
Opsfelder Araújo, Nathan Chancellor, and Stan Johnson.
h# -----BEGIN PGP SIGNATURE-----
* tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix set_memory_*() against concurrent accesses
powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP
powerpc/xive: Do not mark xive_request_ipi() as __init
Laurent reported that STRICT_MODULE_RWX was causing intermittent crashes
on one of his systems:
kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc008000004073278
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks ...
CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12
Workqueue: events control_work_handler [virtio_console]
NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0
REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+)
MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf
...
NIP fill_queue+0xf0/0x210 [virtio_console]
LR fill_queue+0xf0/0x210 [virtio_console]
Call Trace:
fill_queue+0xb4/0x210 [virtio_console] (unreliable)
add_port+0x1a8/0x470 [virtio_console]
control_work_handler+0xbc/0x1e8 [virtio_console]
process_one_work+0x290/0x590
worker_thread+0x88/0x620
kthread+0x194/0x1a0
ret_from_kernel_thread+0x5c/0x64
Jordan, Fabiano & Murilo were able to reproduce and identify that the
problem is caused by the call to module_enable_ro() in do_init_module(),
which happens after the module's init function has already been called.
Our current implementation of change_page_attr() is not safe against
concurrent accesses, because it invalidates the PTE before flushing the
TLB and then installing the new PTE. That leaves a window in time where
there is no valid PTE for the page, if another CPU tries to access the
page at that time we see something like the fault above.
We can't simply switch to set_pte_at()/flush TLB, because our hash MMU
code doesn't handle a set_pte_at() of a valid PTE. See [1].
But we do have pte_update(), which replaces the old PTE with the new,
meaning there's no window where the PTE is invalid. And the hash MMU
version hash__pte_update() deals with synchronising the hash page table
correctly.
[1]: https://lore.kernel.org/linuxppc-dev/87y318wp9r.fsf@linux.ibm.com/
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Murilo Opsfelder Araújo <muriloo@linux.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818120518.3603172-1-mpe@ellerman.id.au
PAPR interface currently supports two different ways of communicating resource
grouping details to the OS. These are referred to as Form 0 and Form 1
associativity grouping. Form 0 is the older format and is now considered
deprecated. This patch adds another resource grouping named FORM2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-6-aneesh.kumar@linux.ibm.com
This helper is only used with the dispatch trace log collection.
A later patch will add Form2 affinity support and this change helps
in keeping that simpler. Also add a comment explaining we don't expect
the code to be called with FORM0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-5-aneesh.kumar@linux.ibm.com
The associativity details of the newly added resourced are collected from
the hypervisor via "ibm,configure-connector" rtas call. Update the numa
distance details of the newly added numa node after the above call.
Instead of updating NUMA distance every time we lookup a node id
from the associativity property, add helpers that can be used
during boot which does this only once. Also remove the distance
update from node id lookup helpers.
Currently, we duplicate parsing code for ibm,associativity and
ibm,associativity-lookup-arrays in the kernel. The associativity array provided
by these device tree properties are very similar and hence can use
a helper to parse the node id and numa distance details.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-4-aneesh.kumar@linux.ibm.com
Also make related code cleanup that will allow adding FORM2_AFFINITY in
later patches. No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-3-aneesh.kumar@linux.ibm.com
No functional change in this patch. arch_debugfs_dir is the generic kernel
name declared in linux/debugfs.h for arch-specific debugfs directory.
Architectures like x86/s390 already use the name. Rename powerpc
specific powerpc_debugfs_root to arch_debugfs_dir.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-2-aneesh.kumar@linux.ibm.com
Similar to x86/s390 add a debugfs file to tune tlb_single_page_flush_ceiling.
Also add a debugfs entry for tlb_local_single_page_flush_ceiling.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-1-aneesh.kumar@linux.ibm.com
After a LPM, the device tree node ibm,dynamic-reconfiguration-memory may be
updated by the hypervisor in the case the NUMA topology of the LPAR's
memory is updated.
This is handled by the kernel, but the memory's node is not updated because
there is no way to move a memory block between nodes from the Linux kernel
point of view.
If later a memory block is added or removed, drmem_update_dt() is called
and it is overwriting the DT node ibm,dynamic-reconfiguration-memory to
match the added or removed LMB. But the LMB's associativity node has not
been updated after the DT node update and thus the node is overwritten by
the Linux's topology instead of the hypervisor one.
Introduce a hook called when the ibm,dynamic-reconfiguration-memory node is
updated to force an update of the LMB's associativity. However, ignore the
call to that hook when the update has been triggered by drmem_update_dt().
Because, in that case, the LMB tree has been used to set the DT property
and thus it doesn't need to be updated back. Since drmem_update_dt() is
called under the protection of the device_hotplug_lock and the hook is
called in the same context, use a simple boolean variable to detect that
call.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210517090606.56930-1-ldufour@linux.ibm.com
When a LPAR is migratable, we should consider the maximum possible NUMA
node instead of the number of NUMA nodes from the actual system.
The DT property 'ibm,current-associativity-domains' defines the maximum
number of nodes the LPAR can see when running on that box. But if the
LPAR is being migrated on another box, it may see up to the nodes
defined by 'ibm,max-associativity-domains'. So if a LPAR is migratable,
that value should be used.
Unfortunately, there is no easy way to know if an LPAR is migratable or
not. The hypervisor exports the property 'ibm,migratable-partition' in
the case it set to migrate partition, but that would not mean that the
current partition is migratable.
Without this patch, when a LPAR is started on a 2 node box and then
migrated to a 3 node box, the hypervisor may spread the LPAR's CPUs on
the 3rd node. In that case if a CPU from that 3rd node is added to the
LPAR, it will be wrongly assigned to the node because the kernel has
been set to use up to 2 nodes (the configuration of the departure node).
With this patch applies, the CPU is correctly added to the 3rd node.
Fixes: f9f130ff2e ("powerpc/numa: Detect support for coregroup")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511073136.17795-1-ldufour@linux.ibm.com
This reverts commit c742199a01.
c742199a01 ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
breaks arm64 in at least two ways for configurations where PUD or PMD
folding occur:
1. We no longer install huge-vmap mappings and silently fall back to
page-granular entries, despite being able to install block entries
at what is effectively the PGD level.
2. If the linear map is backed with block mappings, these will now
silently fail to be created in alloc_init_pud(), causing a panic
early during boot.
The pgtable selftests caught this, although a fix has not been
forthcoming and Christophe is AWOL at the moment, so just revert the
change for now to get a working -rc3 on which we can queue patches for
5.15.
A simple revert breaks the build for 32-bit PowerPC 8xx machines, which
rely on the default function definitions when the corresponding
page-table levels are folded, since commit a6a8f7c4aa ("powerpc/8xx:
add support for huge pages on VMAP and VMALLOC"), eg:
powerpc64-linux-ld: mm/vmalloc.o: in function `vunmap_pud_range':
linux/mm/vmalloc.c:362: undefined reference to `pud_clear_huge'
To avoid that, add stubs for pud_clear_huge() and pmd_clear_huge() in
arch/powerpc/mm/nohash/8xx.c as suggested by Christophe.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c742199a01 ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
[mpe: Fold in 8xx.c changes from Christophe and mention in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linux-arm-kernel/CAMuHMdXShORDox-xxaeUfDW3wx2PeggFSqhVSHVZNKCGK-y_vQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20210717160118.9855-1-jonathan@marek.ca
Link: https://lore.kernel.org/r/87r1fs1762.fsf@mpe.ellerman.id.au
Signed-off-by: Will Deacon <will@kernel.org>
Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to: Bharata B Rao, Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Guenter
Roeck, Jiri Olsa, Naveen N. Rao, Nicholas Piggin, Valentin Schneider.
-----BEGIN PGP SIGNATURE-----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=q3Ag
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd
instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count
underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to Bharata B Rao, Cédric Le Goater, Christian Zigotzky,
Christophe Leroy, Guenter Roeck, Jiri Olsa, Naveen N. Rao, Nicholas
Piggin, and Valentin Schneider"
* tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
powerpc/64e: Fix system call illegal mtmsrd instruction
powerpc/xive: Fix error handling when allocating an IPI
powerpc/bpf: Reject atomic ops in ppc32 JIT
powerpc/bpf: Fix detecting BPF atomic instructions
powerpc/mm: Fix lockup on kernel exec fault
flush_tlb_range is special in that we don't specify the page size used for
the translation. Hence when flushing TLB we flush the translation cache
for all possible page sizes. The kernel also uses the same interface when
moving page tables around. Such a move requires us to flush the page walk
cache.
Instead of adding another interface to force page walk cache flush, update
flush_tlb_range to flush page walk cache if the range flushed is more than
the PMD range. A page table move will always involve an invalidate range
more than PMD_SIZE.
Running microbenchmark with mprotect and parallel memory access didn't
show any observable performance impact.
Link: https://lkml.kernel.org/r/20210616045735.374532-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().
Commit d7df2443cd ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca02 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404.
Fixes: d3ca587404 ("powerpc/mm: Fix reporting of kernel execute faults")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/024bb05105050f704743a0083fe3548702be5706.1625138205.git.christophe.leroy@csgroup.eu
- A big series refactoring parts of our KVM code, and converting some to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li,
Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique
Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley,
Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun
Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain,
YueHaibing, Zhang Jianhua, Zhen Lei.
-----BEGIN PGP SIGNATURE-----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=zo4d
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
The early bad fault or key fault test in do_hash_fault() ends up calling
into ___do_page_fault without having gone through an interrupt handler
wrapper (except the initial _RAW one). This can end up calling local irq
functions while the interrupt has not been reconciled, which will likely
cause crashes and it trips up on a later patch that adds more assertions.
pkey_exec_prot from selftests causes this path to be executed.
There is no real reason to run the in_nmi() test should be performed
before the key fault check. In fact if a perf interrupt in the hash
fault code did a stack walk that was made to take a key fault somehow
then running ___do_page_fault could possibly cause another hash fault
causing problems. Move the in_nmi() test first, and then do everything
else inside the regular interrupt handler function.
Fixes: 3a96570ffc ("powerpc: convert interrupt handlers to use wrappers")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-2-npiggin@gmail.com
On SMP, setup_kuep() is also called from start_secondary() since
commit 86f46f3432 ("powerpc/32s: Initialise KUAP and KUEP in C").
start_secondary() is not an __init function.
Remove the __init marker from setup_kuep() and bail out when
not caller on the first CPU as the work is already done.
Fixes: 10248dcba1 ("powerpc/44x: Implement Kernel Userspace Exec Protection (KUEP)")
Fixes: 86f46f3432 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ee05934288994a65743a987acb1558f12c0c8c1.1624969450.git.christophe.leroy@csgroup.eu
On SMP, setup_kup() is also called from start_secondary().
start_secondary() is not an __init function.
Remove the __init marker from setup_kuep() and setup_kuap().
Fixes: 86f46f3432 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42f4bd12b476942e4d5dc81c0e839d8871b20b1c.1624863319.git.christophe.leroy@csgroup.eu
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
Core changes:
- Cleanup and simplification of common code to invoke the low level
interrupt flow handlers when this invocation requires irqdomain
resolution. Add the necessary core infrastructure.
- Provide a proper interface for modular PMU drivers to set the
interrupt affinity.
- Add a request flag which allows to exclude interrupts from spurious
interrupt detection. Useful especially for IPI handlers which always
return IRQ_HANDLED which turns the spurious interrupt detection into a
pointless waste of CPU cycles.
Driver changes:
- Bulk convert interrupt chip drivers to the new irqdomain low level flow
handler invocation mechanism.
- Add device tree bindings for the Renesas R-Car M3-W+ SoC
- Enable modular build of the Qualcomm PDC driver
- The usual small fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=FIKh
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Cleanup and simplification of common code to invoke the low level
interrupt flow handlers when this invocation requires irqdomain
resolution. Add the necessary core infrastructure.
- Provide a proper interface for modular PMU drivers to set the
interrupt affinity.
- Add a request flag which allows to exclude interrupts from spurious
interrupt detection. Useful especially for IPI handlers which
always return IRQ_HANDLED which turns the spurious interrupt
detection into a pointless waste of CPU cycles.
Driver changes:
- Bulk convert interrupt chip drivers to the new irqdomain low level
flow handler invocation mechanism.
- Add device tree bindings for the Renesas R-Car M3-W+ SoC
- Enable modular build of the Qualcomm PDC driver
- The usual small fixes and improvements"
* tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties
irqchip: gic-pm: Remove redundant error log of clock bulk
irqchip/sun4i: Remove unnecessary oom message
irqchip/irq-imx-gpcv2: Remove unnecessary oom message
irqchip/imgpdc: Remove unnecessary oom message
irqchip/gic-v3-its: Remove unnecessary oom message
irqchip/gic-v2m: Remove unnecessary oom message
irqchip/exynos-combiner: Remove unnecessary oom message
irqchip: Bulk conversion to generic_handle_domain_irq()
genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()
genirq: Add generic_handle_domain_irq() helper
irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()
irqdesc: Fix __handle_domain_irq() comment
genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co
irqdomain: Introduce irq_resolve_mapping()
irqdomain: Protect the linear revmap with RCU
irqdomain: Cache irq_data instead of a virq number in the revmap
irqdomain: Use struct_size() helper when allocating irqdomain
irqdomain: Make normal and nomap irqdomains exclusive
powerpc: Move the use of irq_domain_add_nomap() behind a config option
...
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA
configuration options are equivalent.
Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead.
Done with
$ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \
$(git grep -wl CONFIG_NEED_MULTIPLE_NODES)
$ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \
$(git grep -wl NEED_MULTIPLE_NODES)
with manual tweaks afterwards.
[rppt@linux.ibm.com: fix arm boot crash]
Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com
Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of live migration
- Support for initializing the PDPTRs without loading them from memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this has
been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on
AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDV9UYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIRgf/XX8fKLh24RnTOs2ldIu2AfRGVrT4
QMrr8MxhmtukBAszk2xKvBt8/6gkUjdaIC3xqEnVjxaDaUvZaEtP7CQlF5JV45rn
iv1zyxUKucXrnIOr+gCioIT7qBlh207zV35ArKioP9Y83cWx9uAs22pfr6g+7RxO
h8bJZlJbSG6IGr3voANCIb9UyjU1V/l8iEHqRwhmr/A5rARPfD7g8lfMEQeGkzX6
+/UydX2fumB3tl8e2iMQj6vLVdSOsCkehvpHK+Z33EpkKhan7GwZ2sZ05WmXV/nY
QLAYfD10KegoNWl5Ay4GTp4hEAIYVrRJCLC+wnLdc0U8udbfCuTC31LK4w==
=NcRh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This covers all architectures (except MIPS) so I don't expect any
other feature pull requests this merge window.
ARM:
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration and
apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical
address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of
live migration
- Support for initializing the PDPTRs without loading them from
memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this
has been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM
registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
on AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
kvm: x86: disable the narrow guest module parameter on unload
selftests: kvm: Allows userspace to handle emulation errors.
kvm: x86: Allow userspace to handle emulation errors
KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
KVM: x86: Enhance comments for MMU roles and nested transition trickiness
KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
KVM: x86/mmu: Use MMU's role to determine PTTYPE
KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
KVM: x86/mmu: Add a helper to calculate root from role_regs
KVM: x86/mmu: Add helper to update paging metadata
KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
KVM: x86/mmu: Get nested MMU's root level from the MMU's role
...
Commit aaa2295292 ("powerpc/mm: Add physical address to Linux page
table dump") changed range coalescing to only combine ranges that are
both virtually and physically contiguous, in order to avoid erroneous
combination of unrelated mappings in IOREMAP space.
But in the VMALLOC space, mappings almost never have contiguous
physical pages, so the commit mentionned above leads to dumping one
line per page for vmalloc mappings.
Taking into account the vmalloc always leave a gap between two areas,
we never have two mappings dumped as a single combination even if they
have the exact same flags. The only space that may have encountered
such an issue was the early IOREMAP which is not using vmalloc engine.
But previous commits added gaps between early IO mappings, so it is
not an issue anymore.
That commit created some difficulties with KASAN mappings, see
commit cabe8138b2 ("powerpc: dump as a single line areas mapping a
single physical page.") and with huge page, see
commit b00ff6d8c1 ("powerpc/ptdump: Properly handle non standard
page size").
So, almost revert commit aaa2295292 to properly coalesce pages
mapped with the same flags as before, only keep the display of the
first physical address of the range, as it can be usefull especially
for IO mappings.
It brings back powerpc at the same level as other architectures and
simplifies the conversion to GENERIC PTDUMP.
With the patch:
---[ kasan shadow mem start ]---
0xf8000000-0xf8ffffff 0x07000000 16M huge rw present dirty accessed
0xf9000000-0xf91fffff 0x01434000 2M r present accessed
0xf9200000-0xf95affff 0x02104000 3776K rw present dirty accessed
0xfef5c000-0xfeffffff 0x01434000 656K r present accessed
---[ kasan shadow mem end ]---
Before:
---[ kasan shadow mem start ]---
0xf8000000-0xf8ffffff 0x07000000 16M huge rw present dirty accessed
0xf9000000-0xf91fffff 0x01434000 16K r present accessed
0xf9200000-0xf9203fff 0x02104000 16K rw present dirty accessed
0xf9204000-0xf9207fff 0x0213c000 16K rw present dirty accessed
0xf9208000-0xf920bfff 0x02174000 16K rw present dirty accessed
0xf920c000-0xf920ffff 0x02188000 16K rw present dirty accessed
0xf9210000-0xf9213fff 0x021dc000 16K rw present dirty accessed
0xf9214000-0xf9217fff 0x02220000 16K rw present dirty accessed
0xf9218000-0xf921bfff 0x023c0000 16K rw present dirty accessed
0xf921c000-0xf921ffff 0x023d4000 16K rw present dirty accessed
0xf9220000-0xf9227fff 0x023ec000 32K rw present dirty accessed
...
0xf93b8000-0xf93e3fff 0x02614000 176K rw present dirty accessed
0xf93e4000-0xf94c3fff 0x027c0000 896K rw present dirty accessed
0xf94c4000-0xf94c7fff 0x0236c000 16K rw present dirty accessed
0xf94c8000-0xf94cbfff 0x041f0000 16K rw present dirty accessed
0xf94cc000-0xf94cffff 0x029c0000 16K rw present dirty accessed
0xf94d0000-0xf94d3fff 0x041ec000 16K rw present dirty accessed
0xf94d4000-0xf94d7fff 0x0407c000 16K rw present dirty accessed
0xf94d8000-0xf94f7fff 0x041c0000 128K rw present dirty accessed
...
0xf95ac000-0xf95affff 0x042b0000 16K rw present dirty accessed
0xfef5c000-0xfeffffff 0x01434000 16K r present accessed
---[ kasan shadow mem end ]---
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c56ce1f5c3c75adc9811b1a5f9c410fa74183a8d.1618828806.git.christophe.leroy@csgroup.eu
When using the Radix MMU our PGD is always 64K, and must be naturally
aligned.
For a 4K page size kernel that means page alignment of swapper_pg_dir is
not sufficient, leading to failure to boot.
Use the existing MAX_PTRS_PER_PGD which has the correct value, and
avoids us hard-coding 64K here.
Fixes: e72421a085 ("powerpc: Define swapper_pg_dir[] in C")
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210624123420.2784187-1-mpe@ellerman.id.au
Enable support for process-scoped invalidations from nested
guests and partition-scoped invalidations for nested guests.
Process-scoped invalidations for any level of nested guests
are handled by implementing H_RPT_INVALIDATE handler in the
nested guest exit path in L0.
Partition-scoped invalidation requests are forwarded to the
right nested guest, handled there and passed down to L0
for eventual handling.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[aneesh: Nested guest partition-scoped invalidation changes]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Squash in fixup patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-5-bharata@linux.ibm.com
H_RPT_INVALIDATE does two types of TLB invalidations:
1. Process-scoped invalidations for guests when LPCR[GTSE]=0.
This is currently not used in KVM as GTSE is not usually
disabled in KVM.
2. Partition-scoped invalidations that an L1 hypervisor does on
behalf of an L2 guest. This is currently handled
by H_TLB_INVALIDATE hcall and this new replaces the old that.
This commit enables process-scoped invalidations for L1 guests.
Support for process-scoped and partition-scoped invalidations
from/for nested guests will be added separately.
Process scoped tlbie invalidations from L1 and nested guests
need RS register for TLBIE instruction to contain both PID and
LPID. This patch introduces primitives that execute tlbie
instruction with both PID and LPID set in prepartion for
H_RPT_INVALIDATE hcall.
A description of H_RPT_INVALIDATE follows:
int64 /* H_Success: Return code on successful completion */
/* H_Busy - repeat the call with the same */
/* H_Parameter, H_P2, H_P3, H_P4, H_P5 : Invalid
parameters */
hcall(const uint64 H_RPT_INVALIDATE, /* Invalidate RPT
translation
lookaside information */
uint64 id, /* PID/LPID to invalidate */
uint64 target, /* Invalidation target */
uint64 type, /* Type of lookaside information */
uint64 pg_sizes, /* Page sizes */
uint64 start, /* Start of Effective Address (EA)
range (inclusive) */
uint64 end) /* End of EA range (exclusive) */
Invalidation targets (target)
-----------------------------
Core MMU 0x01 /* All virtual processors in the
partition */
Core local MMU 0x02 /* Current virtual processor */
Nest MMU 0x04 /* All nest/accelerator agents
in use by the partition */
A combination of the above can be specified,
except core and core local.
Type of translation to invalidate (type)
---------------------------------------
NESTED 0x0001 /* invalidate nested guest partition-scope */
TLB 0x0002 /* Invalidate TLB */
PWC 0x0004 /* Invalidate Page Walk Cache */
PRT 0x0008 /* Invalidate caching of Process Table
Entries if NESTED is clear */
PAT 0x0008 /* Invalidate caching of Partition Table
Entries if NESTED is set */
A combination of the above can be specified.
Page size mask (pages)
----------------------
4K 0x01
64K 0x02
2M 0x04
1G 0x08
All sizes (-1UL)
A combination of the above can be specified.
All page sizes can be selected with -1.
Semantics: Invalidate radix tree lookaside information
matching the parameters given.
* Return H_P2, H_P3 or H_P4 if target, type, or pageSizes parameters
are different from the defined values.
* Return H_PARAMETER if NESTED is set and pid is not a valid nested
LPID allocated to this partition
* Return H_P5 if (start, end) doesn't form a valid range. Start and
end should be a valid Quadrant address and end > start.
* Return H_NotSupported if the partition is not in running in radix
translation mode.
* May invalidate more translation information than requested.
* If start = 0 and end = -1, set the range to cover all valid
addresses. Else start and end should be aligned to 4kB (lower 11
bits clear).
* If NESTED is clear, then invalidate process scoped lookaside
information. Else pid specifies a nested LPID, and the invalidation
is performed on nested guest partition table and nested guest
partition scope real addresses.
* If pid = 0 and NESTED is clear, then valid addresses are quadrant 3
and quadrant 0 spaces, Else valid addresses are quadrant 0.
* Pages which are fully covered by the range are to be invalidated.
Those which are partially covered are considered outside
invalidation range, which allows a caller to optimally invalidate
ranges that may contain mixed page sizes.
* Return H_SUCCESS on success.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-4-bharata@linux.ibm.com
Add a field to mmu_psize_def to store the page size encodings
of H_RPT_INVALIDATE hcall. Initialize this while scanning the radix
AP encodings. This will be used when invalidating with required
page size encoding in the hcall.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-3-bharata@linux.ibm.com
Use set_memory_attr() instead of the PPC32 specific change_page_attr()
change_page_attr() was checking that the address was not mapped by
blocks and was handling highmem, but that's unneeded because the
affected pages can't be in highmem and block mapping verification
is already done by the callers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[ruscur: rebase on powerpc/merge with Christophe's new patches]
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-10-jniethe5@gmail.com
In addition to the set_memory_xx() functions which allows to change
the memory attributes of not (yet) used memory regions, implement a
set_memory_attr() function to:
- set the final memory protection after init on currently used
kernel regions.
- enable/disable kernel memory regions in the scope of DEBUG_PAGEALLOC.
Unlike the set_memory_xx() which can act in three step as the regions
are unused, this function must modify 'on the fly' as the kernel is
executing from them. At the moment only PPC32 will use it and changing
page attributes on the fly is not an issue.
Reported-by: kbuild test robot <lkp@intel.com>
[ruscur: cast "data" to unsigned long instead of int]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-9-jniethe5@gmail.com
The set_memory_{ro/rw/nx/x}() functions are required for
STRICT_MODULE_RWX, and are generally useful primitives to have. This
implementation is designed to be generic across powerpc's many MMUs.
It's possible that this could be optimised to be faster for specific
MMUs.
This implementation does not handle cases where the caller is attempting
to change the mapping of the page it is executing from, or if another
CPU is concurrently using the page being altered. These cases likely
shouldn't happen, but a more complex implementation with MMU-specific code
could safely handle them.
On hash, the linear mapping is not kept in the linux pagetable, so this
will not change the protection if used on that range. Currently these
functions are not used on the linear map so just WARN for now.
apply_to_existing_page_range() does not work on huge pages so for now
disallow changing the protection of huge pages.
[jpn: - Allow set memory functions to be used without Strict RWX
- Hash: Disallow certain regions
- Have change_page_attr() take function pointers to manipulate ptes
- Radix: Add ptesync after set_pte_at()]
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609013431.9805-2-jniethe5@gmail.com
Merge some powerpc KVM patches from our topic branch.
In particular this brings in Nick's big series rewriting parts of the
guest entry/exit path in C.
Conflicts:
arch/powerpc/kernel/security.c
arch/powerpc/kvm/book3s_hv_rmhandlers.S
Update _tlbiel_pid() such that we can avoid build errors like below when
using this function in other places.
arch/powerpc/mm/book3s64/radix_tlb.c: In function ‘__radix__flush_tlb_range_psize’:
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: warning: ‘asm’ operand 3 probably does not match constraints
114 | asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
| ^~~
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: error: impossible constraint in ‘asm’
make[4]: *** [scripts/Makefile.build:271: arch/powerpc/mm/book3s64/radix_tlb.o] Error 1
m
With this fix, we can also drop the __always_inline in __radix_flush_tlb_range_psize
which was added by commit e12d6d7d46 ("powerpc/mm/radix: mark __radix__flush_tlb_range_psize() as __always_inline")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210610083639.387365-1-aneesh.kumar@linux.ibm.com
PTE_SIZE means PTE page table size in most placed, whereas
in hash_low.S in means size of one entry in the table.
Rename it PTE_T_SIZE, and define it directly in hash_low.S
instead of going through asm-offsets.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83a008a9fd6cc3f2bbcb470f592555d260ed7a3d.1623063174.git.christophe.leroy@csgroup.eu
At the time being, empty_zero_page[] is defined in each
platform head.S.
Define it in mm/mem.c instead, and put it in BSS section instead
of the DATA section. Commit 5227cfa71f ("arm64: mm: place
empty_zero_page in bss") explains why it is interesting to have
it in BSS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5838caffa269e0957c5a50cc85477876220298b0.1623063174.git.christophe.leroy@csgroup.eu
DEBUG_CLAMP_LAST_CONTEXT was there in the old days to reduce
number of contexts in order to ease debugging implementation
of context switching, but that's been quite stable during
years now.
As it is not user selectable, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da81837b452e8b9f1657b529b9c3050dc10b9770.1622712515.git.christophe.leroy@csgroup.eu
