Add binding for newer version of Google Spherion (Acer Chromebook 514):
rev4.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add binding for newer version of Google Hayato: rev5-sku2.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
1. Add compatible for MT8395.
2. Add bindings for the MediaTek mt8395-evk board, also known
as the "Genio 1200-EVK".
The MT8195 and MT8395 belong to the same SoC family,
with only minor differences in their physical characteristics.
They utilize unique efuse values for differentiation.
The booting process and configurations are managed by boot
loaders, firmware, and TF-A. Consequently, the part numbers
and procurement channels vary.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230914055145.16801-1-macpaul.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Device specific bindings should not allow undefined properties. This is
accomplished in json-schema with 'additionalProperties: false'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Device specific bindings should not allow undefined properties. This is
accomplished in json-schema with 'additionalProperties: false'. With this,
the 'connector' child node needs to be defined to prevent warnings.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231016155527.2973385-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Device specific bindings should not allow undefined properties. This is
accomplished in json-schema with 'additionalProperties: false'.
Examples should be last in the schema, so move additionalProperties up
while we're here.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231016155547.2973853-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This property is used to describe a I3C bus with attached MCTP I3C
target devices.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Except scaling UFS and bus clocks, it's necessary to scale also the
voltages of regulators or power domain performance state levels. Adding
Operating Performance Points table allows to adjust power domain
performance state, depending on the UFS clock speed.
OPPv2 deprecates previous property limited to clock scaling:
freq-table-hz.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1. Atmel: Use __counted_by annotation.
2. Tegra: Add Tegra234 clients for RCE and VI.
3. Cleanup:
- Use device_get_match_data() to simplify the code,
- Make "additionalProperties: true" explicit in Devicetree bindings.
-----BEGIN PGP SIGNATURE-----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=+zNo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uqQ0
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.7
1. Atmel: Use __counted_by annotation.
2. Tegra: Add Tegra234 clients for RCE and VI.
3. Cleanup:
- Use device_get_match_data() to simplify the code,
- Make "additionalProperties: true" explicit in Devicetree bindings.
* tag 'memory-controller-drv-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: Use device_get_match_data()
memory: tegra: Add Tegra234 clients for RCE and VI
dt-bindings: memory-controllers: Make "additionalProperties: true" explicit
memory: atmel-ebi: Annotate struct atmel_ebi_dev with __counted_by
Link: https://lore.kernel.org/r/20231016074013.28286-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Powkiddy RGB30 is a portable handheld console from Powkiddy which
uses the Rockchip RK3566 SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013183918.225666-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
-----BEGIN PGP SIGNATURE-----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=IbXh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u9+1
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Powkiddy RGB30 panel is a 4 inch 720x720 MIPI-DSI LCD panel. It
appears to be based on the ST7703 LCD controller (this is assumed from
the init sequence similarity between this and other displays). Powkiddy
would not share the part number or name for the display from the bill
of materials and there were no obvious external markings, so name the
panel for the device (Powkiddy RGB30).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-3-macroalpha82@gmail.com
Add documentation for the ESP32S3 USB CDC-ACM gadget controller.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231010085926.1021667-5-jcmvbkbc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'allOf' block should go after the 'required' block according to DT
bindings best practices.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013141925.3427158-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert binding from text format to YAML.
Additions to original text binding:
- add rs485 reference.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231012152647.2607455-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is
no mode-switch support, only orientation switch.
Make the 'mode-switch' property a non-required one.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231016131141.680517-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SM7125 platform is introduced, with support for Xiaomi Redmi Note 9
Pro. Support for Fairphone 5, on QCM6490, and BQ Aquaris M5, on MSM8939,
are introduced.
With the various QMP PHY bindings having been refactored, SC7180,
SC7280, SDM845, SM8150, and SM8250 are transitioned to the new USB/DP
combo PHY binding. IPQ6018, IPQ8074 MSM8998, SC7280, SC8180X, SDM845,
SM8150, SM8250, and SM8450 are transitioned to the new PCIe PHY binding,
and SC8180X is transitioned to the new UFS phy binding.
The UFS power supply situation is clarified, and a range of boards
across MSM8996, MSM8998, SM4250, SM6115, SM6125, SM8350, SM8450, and
SM8550 receives corrections for this.
On IPQ5018 watchdog support is introduced, and the SCM driver has SDI
(debug image) enabled - so that it can be disabled. On IPQ5332 USB is
enabled. The hwspinlock identifier is corrected across IPQ5332, IPQ6018,
IPQ8074 and IPQ9574.
The reserved-memory ranges for the remoteprocs on MSM8916 boards are
refactored, to reduce the amount of duplicated boilerplate definitions.
A number of nodes are transitioned to be disabled by default, to
facilitate new boards.
Samsung Galaxy Tab A 8.0 and Samsung Galaxy Tab A 9.7 gains display
support, and the latter capacitive keys. Samsung Galaxy J5 gains
accelerometer support. The Dragonboard 410c gains missing ADC7533
regulator definition, and an overlay forcing the board to operate in
host mode, for automation purposes.
On MSM8976, the outgoing IPC bits for modem and wcss are corrected, and
reserved-memory regions are updated.
Incorrect reserved-memory regions are also corrected for MSM8992 and
MSM8994 devices.
The QRB2210 RB1 board gets debug UART moved per hardware update.
regulator voltage ranges are corrected, remoteprocs are enabled, USB
SuperSpeed PHY is enabled, and GPIO LEDs are introduced for Bluetooth,
WiFi and a user LED.
Interrupts are described for the SGMII PHYs on SA8775P Ride platform,
and the inline crypto engine is introduced for UFS.
On SC7180 the audio DSP remoteproc is introduced. Additional SKUs of the
Lazor boards are added.The RT5682 audio codec part is reorganized to be
easier to maintain. On Trogdor devices, the touchscreen and display
panels are linked to improve the power cycling behavior across the two.
On SC7280 the cpuidle states are rewritten to support OS-initiated PCSI
mode. LMH interrupts are added, to receive feedback when throttling
occurs. The embedded usb debugger (EUD) description and the dummy
usb-c-connector node is removed, as this is not correctly described. The
USB3 pipe clock input of the global clock controller is properly
described.
Modem remoteproc is introduced on SDM630, and the SDM670 PDC mapping is
corrected.
On the SDM845 MTP PCIe support is introduced. The volumn down and reset
buttons are defined. Remoteproc firmware names and the WiFI
configuration is corrected.
On Sony Xperia XZ2, XZ2 Compact, and XZ3 GPIO lines names are provided
for TLMM and PMICs. The camera regulators are also added.
Display hardware blocks are added to SM6125, and enabled on Sony Xperia
10 II.
The ref clock is wired up to PCIe PHY on SM8150.
On SM8250/QRB5165, and the RB5 board, the DisplayPort controller and the
TCPM is introduced, with all the plumbing to get USB role and
orientation switching, as well as DisplayPort altmode to work.
Interconnects and power-domains are also described for the QUPs on this
platform.
Previously ignored PMICs are described for the SM8350 Hardware
Development Kit (HDK), and PMR735a regulators are introduced. The
pinctrl state for uart18 is corrected.
On SM8450 HDK audio routes are corrected, to enable the analog
microphones on the board. The addition of the PRNG is reverted, in favor
of an upcoming additon of a true RNG.
Constants are replaced with QCOM_SCM_VMID_* defines on a variety of
boards.
The SM8550 QRD board gets Bluetooth support, and the camera clock
controller is described.
Additionally, a number of fixes are introduced in a variety of platforms
and boards, to align with Devicetree bindings.
-----BEGIN PGP SIGNATURE-----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=zgxm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmUtOv0ACgkQYKtH/8kJ
UifMew/+MWcU1rn8D9083g00Hb9mqeCSNUp9o6B2AL0DZea9ABjWs/IQo5suRnMe
TxQgnkgA+0nVCdfmF3spcMJ39D3gzaWnHGeMr1LsGsbMRmXVfBcWzpgkpRB2k2iE
PxcpLpVWrrIjwhqtqcy8X4BGaDaVRA7jFGh810/tF9Avp74ndq4lXYNhf2/MmvuW
iqGztm0n2Qua97dbP/Lyg4zmMMUT9i7QiuToxeJZuqg36am0OkXynsNT8wmwQuO2
pvz9ul2sofIq677VUTMZgxmDl4QM4h+/qkeUwaBjvFOpEtaqjwynBcf1RBCzmMsj
5/pWzypNUh0ELSbGiiDpwlTh9Blq4BY8Lt1tOXFBHXVe5Nee2KS79IVTcLxOFM0i
e1K68r3kw/yzFwCgKBCfP3qzRCmUHeTDI0KTrL3erPMAhIB06TKlgNn+QPot2dti
SkBj/zyXAtfxh6NYPKSQHKvJsun9BsO5ZML0Wo58U+hSm1W53zYmjMVKEJJux3N7
31OECKmqzipo3PLEc0rcMJ0HMmPQR+YdGpfXP3IaDiT6o2Ea2LN4kSavCOrUbnec
asg6LHcuDvmbarfBSfDeSAEcI4c6ZCs9LXTStkiB/K17sOZvFW1UO1pQmChK5EVA
K8nSBBgeL1RnGTXM7IGJTbI9WJi00+mDS5gG5Kwq9x7GxsDtWuk=
=9WsA
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.7
The SM7125 platform is introduced, with support for Xiaomi Redmi Note 9
Pro. Support for Fairphone 5, on QCM6490, and BQ Aquaris M5, on MSM8939,
are introduced.
With the various QMP PHY bindings having been refactored, SC7180,
SC7280, SDM845, SM8150, and SM8250 are transitioned to the new USB/DP
combo PHY binding. IPQ6018, IPQ8074 MSM8998, SC7280, SC8180X, SDM845,
SM8150, SM8250, and SM8450 are transitioned to the new PCIe PHY binding,
and SC8180X is transitioned to the new UFS phy binding.
The UFS power supply situation is clarified, and a range of boards
across MSM8996, MSM8998, SM4250, SM6115, SM6125, SM8350, SM8450, and
SM8550 receives corrections for this.
On IPQ5018 watchdog support is introduced, and the SCM driver has SDI
(debug image) enabled - so that it can be disabled. On IPQ5332 USB is
enabled. The hwspinlock identifier is corrected across IPQ5332, IPQ6018,
IPQ8074 and IPQ9574.
The reserved-memory ranges for the remoteprocs on MSM8916 boards are
refactored, to reduce the amount of duplicated boilerplate definitions.
A number of nodes are transitioned to be disabled by default, to
facilitate new boards.
Samsung Galaxy Tab A 8.0 and Samsung Galaxy Tab A 9.7 gains display
support, and the latter capacitive keys. Samsung Galaxy J5 gains
accelerometer support. The Dragonboard 410c gains missing ADC7533
regulator definition, and an overlay forcing the board to operate in
host mode, for automation purposes.
On MSM8976, the outgoing IPC bits for modem and wcss are corrected, and
reserved-memory regions are updated.
Incorrect reserved-memory regions are also corrected for MSM8992 and
MSM8994 devices.
The QRB2210 RB1 board gets debug UART moved per hardware update.
regulator voltage ranges are corrected, remoteprocs are enabled, USB
SuperSpeed PHY is enabled, and GPIO LEDs are introduced for Bluetooth,
WiFi and a user LED.
Interrupts are described for the SGMII PHYs on SA8775P Ride platform,
and the inline crypto engine is introduced for UFS.
On SC7180 the audio DSP remoteproc is introduced. Additional SKUs of the
Lazor boards are added.The RT5682 audio codec part is reorganized to be
easier to maintain. On Trogdor devices, the touchscreen and display
panels are linked to improve the power cycling behavior across the two.
On SC7280 the cpuidle states are rewritten to support OS-initiated PCSI
mode. LMH interrupts are added, to receive feedback when throttling
occurs. The embedded usb debugger (EUD) description and the dummy
usb-c-connector node is removed, as this is not correctly described. The
USB3 pipe clock input of the global clock controller is properly
described.
Modem remoteproc is introduced on SDM630, and the SDM670 PDC mapping is
corrected.
On the SDM845 MTP PCIe support is introduced. The volumn down and reset
buttons are defined. Remoteproc firmware names and the WiFI
configuration is corrected.
On Sony Xperia XZ2, XZ2 Compact, and XZ3 GPIO lines names are provided
for TLMM and PMICs. The camera regulators are also added.
Display hardware blocks are added to SM6125, and enabled on Sony Xperia
10 II.
The ref clock is wired up to PCIe PHY on SM8150.
On SM8250/QRB5165, and the RB5 board, the DisplayPort controller and the
TCPM is introduced, with all the plumbing to get USB role and
orientation switching, as well as DisplayPort altmode to work.
Interconnects and power-domains are also described for the QUPs on this
platform.
Previously ignored PMICs are described for the SM8350 Hardware
Development Kit (HDK), and PMR735a regulators are introduced. The
pinctrl state for uart18 is corrected.
On SM8450 HDK audio routes are corrected, to enable the analog
microphones on the board. The addition of the PRNG is reverted, in favor
of an upcoming additon of a true RNG.
Constants are replaced with QCOM_SCM_VMID_* defines on a variety of
boards.
The SM8550 QRD board gets Bluetooth support, and the camera clock
controller is described.
Additionally, a number of fixes are introduced in a variety of platforms
and boards, to align with Devicetree bindings.
* tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (148 commits)
arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators
ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use
arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5
dt-bindings: arm: qcom: Add QCM6490 Fairphone 5
arm64: dts: qcom: pm8350c: Add flash led node
arm64: dts: qcom: pm7250b: make SID configurable
arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'
arm64: dts: qcom: msm8939: Fix iommu local address range
arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
arm64: dts: qcom: msm8976: Fix ipc bit shifts
arm64: dts: qcom: msm8976: Split lpass region
arm64: dts: qcom: pm8150l: Add wled node
arm64: dts: qcom: sa8775p: enable the inline crypto engine
arm64: dts: qcom: msm8916/39: Fix venus memory size
arm64: dts: qcom: msm8916/39: Move mpss_mem size to boards
arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations
arm64: dts: qcom: msm8939: Reserve firmware memory dynamically
arm64: dts: qcom: msm8916: Reserve MBA memory dynamically
arm64: dts: qcom: msm8916: Reserve firmware memory dynamically
...
Link: https://lore.kernel.org/r/20231015191107.854658-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Freescale i.MX93 SoC embeds a Synopsys Designware MIPI DSI host
controller and a Synopsys Designware MIPI DPHY. Some configurations
and extensions to them are controlled by i.MX93 media blk-ctrl.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821034008.3876938-9-victor.liu@nxp.com
Sometimes the contents of a partition are compressed. Add a property to
express this and define the algorithm used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230927180545.3522628-1-sjg@chromium.org
We need the tty/serial fixes in here as well for testing, and this
resolves merge conflicts in:
drivers/tty/serial/serial_core.c
as reported in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ST M24C64-D behaves as a regular M24C64, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Document
compatible string for it, so users can describe that page in DT. Note
that users still have to describe the main M24C64 area separately as
that is on separate I2C address from this page.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently the dtbs_check for imx6ul generates warnings like this:
['fsl,imx7d-gpt', 'fsl,imx6sx-gpt'] is too long
The driver has no special handling for fsl,imx7d-gpt, so fsl,imx6sx-gpt is
used. Therefore make imx7d GPT compatible to the imx6sx one to fix the
warning.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231012080033.2715241-4-alexander.stein@ew.tq-group.com
MAC address can be provided by a nvmem-cell, thus allow referencing a
source for the address. Fixes the warning:
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: ethernet@1: 'nvmem-cell-names',
'nvmem-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231012080033.2715241-3-alexander.stein@ew.tq-group.com
This property is defined in thermal-sensor.yaml. Reference this file and
constraint '#thermal-sensor-cells' to 0 for imx-thermal.
Fixes the warning:
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: tempmon:
'#thermal-sensor-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/thermal/imx-thermal.yaml
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231012080033.2715241-2-alexander.stein@ew.tq-group.com
Add compatibility string for the thermal sensors on sa8775p platform.
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230926085948.23046-2-quic_priyjain@quicinc.com
imx8dxl also contains the SCU thermal block.
Add an entry for 'fsl,imx8dxl-sc-thermal'.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230926122957.341094-5-festevam@gmail.com
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties as needed, and then add any missing properties
flagged by the addition.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230926164500.101593-1-robh@kernel.org
Add compatible string for mt7988 lvts application processor.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230922055020.6436-2-linux@fw-web.de
Add device tree bindings for the Cirrus Logic EP93xx timer block
used in these SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230915-ep93xx-v4-11-a1d779dcec10@maquefel.me
The RV3032 can be used as a wake-up source, document the 'wakeup-source'
property as allowed property.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230921192604.70944-1-marex@denx.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the PCF8523 bindings from text format to YAML.
The YAML format is preferred as it allows validation.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230905220826.79901-1-festevam@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The current mcp795 bindings in text format do not support validation and
are missing the optional interrupt property that is currently supported.
Adding the missing property makes the bindings identical to the existing
trivial-rtc bindings.
Add maxim,mcp795 to the trivial-rtc bindings and delete current .txt
bindings
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230906-topic-rtc_mcp795_yaml-v3-1-5262f1b39920@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add device tree bindings for the Cirrus Logic EP93xx RTC block
used in these SoCs.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230915-ep93xx-v4-13-a1d779dcec10@maquefel.me
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the existing txt binding to the preferred YAML format.
The pcf2123 node may contain SPI settings such as spi-cs-high and
spi-max-frequency, which keeps it from being added to the trivial-rtc
binding with its current definition. Add a reference to
spi-peripheral-props.yaml to account for that.
The "interrupts" property was missing in the binding although it is
already supported. Add the missing property in the new binding.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230907-topic-pcf2123_yaml-v2-1-ea87a8e12190@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This rewrites the Epson RTC7301 bindings to use YAML schema,
and adds a property for "reg-io-width" as used in several
other bindings to account for different register strides.
The USRobotics USR8200 uses the byte IO width.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20231010-rtc-7301-regwidth-v3-1-ade586b62794@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Current dt-bindings does not contain compatible property
for child mailbox node. Child mailbox nodes are used
to represent destination (remote) IPI agents. The compatible
property for all destination mailboxes must be required to
identify the node.
This addition of new required property does not break ABI
as current driver does not use this compatible property
but, new features in driver should use this property.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Mailbox controller present in the IPQ SoCs takes the GPLL0 clock also as
an input. Document the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- embargoed hardware issue documentation update
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwDDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+dACeMHpZCh9sxF78uhfIrth6et899uYAoNBoiAOA
pTDip38HytOnQ/FpTEzh
=AuVV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
This simple I2C humidity sensor does not have any additional properties
and can be added to the trivial-devices binding.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231012-topic-si7005_devicetree-v1-2-6c8a6fa7b3ec@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the mount-matrix optional property to the binding since it's supported
and very useful when using the chip on a board.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231012142041.253332-1-martink@posteo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This contains some rework of the Tegra PMC device tree bindings that
will help with validating device trees with json-schema.
-----BEGIN PGP SIGNATURE-----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=Xo5r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=oled
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.7-rc1
This contains some rework of the Tegra PMC device tree bindings that
will help with validating device trees with json-schema.
* tag 'tegra-for-6.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: pmc: Relicense and move into soc/tegra directory
dt-bindings: arm: tegra: pmc: Reformat example
dt-bindings: arm: tegra: pmc: Restructure pad configuration node schema
dt-bindings: arm: tegra: pmc: Increase maximum number of clocks per powergate
dt-bindings: arm: tegra: pmc: Move additionalProperties
dt-bindings: arm: tegra: pmc: Remove useless boilerplate descriptions
dt-bindings: arm: tegra: pmc: Improve property descriptions
Link: https://lore.kernel.org/r/20231013153723.1729109-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZSkx1QAKCRCKwlD9ZEnx
cPRnAP9I5dtR2xpi5qNeEOCdWmyRXLndJ3fVzhQJkPrytjIuhQD/alIpNXsEZD08
+BUSN+3SZDfmyExNYbgUlhsVqkqEywE=
=avuX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=e3Zm
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.7 (take two)
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
* tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: Apply overlays to base dtbs
arm64: dts: renesas: rzg3s-smarc-som: Spelling s/device-type/device_type/
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
arm64: dts: renesas: r9a08g045: Add nodes for SDHI1 and SDHI2
arm64: dts: renesas: ebisu: Document Ebisu-4D support
arm64: dts: renesas: Add R-Car S4 Starter Kit support
arm64: dts: renesas: Add Renesas R8A779F4 SoC support
arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK board
arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
riscv: dts: renesas: r9a07g043f: Add dma-noncoherent property
riscv: dts: renesas: r9a07g043f: Add L2 cache node
ARM: dts: renesas: bockw: Add FLASH node
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
...
Link: https://lore.kernel.org/r/cover.1697200123.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- the new Microchip SAMA5D29 Curiosity board
- a typo fix in TDES node name for SAMA5D4 dtsi
- enablement of RTT as RTC for SAM9X60 Curiosity board
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZSTYRQAKCRCejrg/N2X7
/XiOAQC8ABK8+N0jCvy45CglaIUWemwWDQc1TG59FaIl4tDVbAEAgmFEVVePbs9J
y0P4/f5a9103UKD8KUCl5CnjTb7wHgM=
=1cT5
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=soa/
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for 6.7
It contains:
- the new Microchip SAMA5D29 Curiosity board
- a typo fix in TDES node name for SAMA5D4 dtsi
- enablement of RTT as RTC for SAM9X60 Curiosity board
* tag 'at91-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTT
ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board
dt-bindings: ARM: at91: Document Microchip SAMA5D29 Curiosity
ARM: dts: at91/trivial: fix typo in crypto DT naming
Link: https://lore.kernel.org/r/20231010045955.1259843-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Provide proper bindings including missing vendor prefixes
for the device trees in use and one more new vendor.
- Add a device tree for USRobotics USR8200 which has two
active users.
- Augment the "reset" GPIO buttons to send KEY_RESTART as
appropriate.
- Enable write on the NSLU2 flash so we get a writeable
rootfs on this device.
-----BEGIN PGP SIGNATURE-----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=Eh7F
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=otEO
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-for-soc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Some IXP4xx updates for the v6.7 kernel cycle:
- Provide proper bindings including missing vendor prefixes
for the device trees in use and one more new vendor.
- Add a device tree for USRobotics USR8200 which has two
active users.
- Augment the "reset" GPIO buttons to send KEY_RESTART as
appropriate.
- Enable write on the NSLU2 flash so we get a writeable
rootfs on this device.
* tag 'ixp4xx-for-soc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Use right restart keycode
ARM: dts: ixp4xx-nslu2: Enable write on flash
ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
ARM: dts: Use only the Linksys compatible for now
dt-bindings: arm: List more IXP4xx devices
dt-bindings: Add vendor prefixes
Link: https://lore.kernel.org/r/CACRpkdZZ6W8uic97S9=Aa+S+s0-0k50TDw1e00u6gFcQfAVDdw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Driver fixes for:
- stm32 dma residue calculation and chaining
- stm32 mdma for setting inflight bytes, residue calculation
and resume abort
- channel request, channel enable and dma error in fsl_edma
- runtime pm imbalance in ste_dma40 driver
- deadlock fix in mediatek driver
-----BEGIN PGP SIGNATURE-----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=8dWs
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for:
- stm32 dma residue calculation and chaining
- stm32 mdma for setting inflight bytes, residue calculation and
resume abort
- channel request, channel enable and dma error in fsl_edma
- runtime pm imbalance in ste_dma40 driver
- deadlock fix in mediatek driver"
* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
dmaengine: stm32-dma: fix residue in case of MDMA chaining
dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
dmaengine: stm32-mdma: use Link Address Register to compute residue
dmaengine: stm32-mdma: abort resume if no ongoing transfer
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set
- Add pin groups for the Local Bus State Controller (LBSC) on R-Car
M1A,
- Add support for the RZ/G3S (R9A08G045) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZSk0XwAKCRCKwlD9ZEnx
cCykAP9rDQKb83aBYHLBAmlyRKT1+e8Lm1r4QC7KeiC0v8WHQwEAyLILM38KFwyG
vGaiXlp0MfGmA82a0orjdRBiUdyHqAE=
=QFrw
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.7 (take two)
- Add pin groups for the Local Bus State Controller (LBSC) on R-Car
M1A,
- Add support for the RZ/G3S (R9A08G045) SoC,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document SM8550 compatible for the True Random Number Generator.
Reviewed-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It has been reported at [1] the RNG HW on SM8450 is in fact a True Random
Number Generator and no more Pseudo, document this by adding
a new qcom,trng and the corresponding SoC specific sm8450 compatible.
[1] https://lore.kernel.org/all/20230818161720.3644424-1-quic_omprsing@quicinc.com/
Suggested-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT
to DT schema.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-pxa1928-usb-yaml-v3-1-150c9ef3ab9d@skole.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
RK3588 AV1 decoder hardware block have resets lines and driver code
already support it.
Update yaml file to be aligned with this feature.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add documentation for the pin controller found on the Renesas RZ/G3S
(R9A08G045) SoC. Compared to RZ/G2{L,UL}, RZ/G3S has 82 general-purpose
IOs, no slew rate and output impedance support, and more values for
drive strength which needs to be expressed in microamp.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-21-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the new compatibles used on the Facebook Minerva Chassis
Management Controller (CMC).
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230914125648.3966519-2-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the priority property to the gpio-poweroff bindings description.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231006130428.11259-4-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an entry for the Zicond extension to the riscv,isa-extensions property.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add an entry for the Smstateen extension to the riscv,isa-extensions
property.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
SM7150 has a qcom,smmu-v2-style SMMU just for Adreno and friends.
Document it.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230913184526.20016-2-danila@jiaxyga.com
Signed-off-by: Will Deacon <will@kernel.org>
The ST M24C32-D behaves as a regular M24C32, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Document
compatible string for it, so users can describe that page in DT. Note
that users still have to describe the main M24C32 area separately as
that is on separate I2C address from this page.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Because all properties are now accepted, there is no need to explicitly
allow them in the schema.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no reason to restrict the allowed rotation degrees to 0 and 180,
as the sensor can be mounted with any rotation.
Also, as all the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no reason to restrict the allowed rotation degrees to 0 and 180,
as the sensor can be mounted with any rotation.
Also, as all the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Allow properties from video-interface-devices.yaml for the SK Hynix Hi-846
sensor.
All properties specified in video-interface-devices.yaml schema are
valid, so make them accepted by changing "additionalProperties: false"
to "unevaluatedProperties: false" at the schema top-level.
Add two properties from video-interface-devices.yaml to the example
to validate the new schema.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a SoC-specific compatible string for TI's integration of this IP in
J7 and AM62 line of SoCs.
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The data-lanes property maps the logical lane numbers to the physical
lane numbers. The position of an entry is the logical lane number and
its value is the physical lane number. Since one physical lane can only
map to one logical lane, no number in the list should repeat. Add the
uniqueItems constraint on the property to enforce this.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This reverts commit ae2a1f0f2c. An updated
series was sent. And this patch was not needed anymore because another
compatible entry was reused.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reverted as Rob Herring is tracking undocumented compatibles and as per
discussion in the thread, we can not remove this deprecated compatibles from
the driver without potential/likely regressions. So keep it around
as it's not that painful anyway.
This reverts commit 711fb79a1e.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Amit Kucheria has not been participating in kernel development in any
way or form for quite some time, so it is not useful to list him as a
designated reviewer for the thermal subsystem or as the thermal zone DT
binding maintainer.
Remove him from the THERMAL entry in MAINTAINERS and list Daniel Lezcano
as the new thermal zone DT binding maintainer.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
Add MTU3a binding documentation for Renesas RZ/{G2UL,Five} SoCs.
MTU3a block is identical to one found on RZ/G2L, so no driver changes are
required. The fallback compatible string "renesas,rz-mtu3" will be used
on RZ/{G2UL,Five}.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-4-biju.das.jz@bp.renesas.com
Fix the documentation issues pointed by Pavel while backporting
it to 6.1.y-cip.
- Replace '32- bit'->'32-bit'
- Consistently remove '.' at the end of line for the specifications
- Replace ' (excluding MTU8)'-> '(excluding MTU8)'
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZH79%2FUjgYg+0Ruiu@duo.ucw.cz
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-3-biju.das.jz@bp.renesas.com
Document the compatible for the CCI block found on SC7280 SoC.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register can
be read
- Make the Renesas RZG2L driver correct for interrupts which are outside
of the LSB in the TSSR register by using the proper macro for
calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc Zyngier
as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as he
is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple of
years!
-----BEGIN PGP SIGNATURE-----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=ybNS
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
Here is the collection of pending fixes since a couple of weeks ago,
which became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply.
-----BEGIN PGP SIGNATURE-----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=2SOT
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving
controller is a Himax HX8394-F, slightly different from LTK050H3146W by
its init sequence, mode details and mode flags.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-3-quentin.schulz@theobroma-systems.com
The Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
schema does not enforce number of reset GPIOs, thus each device binding
must do it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231005083650.92222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge series from xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>:
To use RT5682S as the codec and MAX98390 as the amp, add a new
sound card named mt8188_rt5682s.
Dual-license this binding for consistency with other Tegra bindings and
move it into the soc/tegra directory.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The pad configuration node schema in its current form can accidentally
match other properties as well. Restructure the schema to better match
how the device trees are using these.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some powergate definitions need more than 8 clocks, so bump the number
up to 10, which is the current maximum in any known device tree file.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For indented subschemas it can be difficult to understand which block an
additionalProperties property belongs to. Moving it closer to the
beginning of a block is a good way to clarify this.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The descriptions for the clocks and resets properties are no longer
useful in the context of json-schema, so drop them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reformat the description of various properties to make them more
consistent with existing ones. Make use of json-schema's ability to
provide a description for individual list items to make improve the
documentation further.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
make CHECK_DTBS=y st/stm32f469-disco.dtb
brings up a warning about a missing argument:
stm32f469-disco.dtb: pinctrl@40020000: st,syscfg:0: [21, 8] is too short
The description of the third entry indicates that this entry is optional.
The code in stm32_pctrl_dt_setup_irq parses st,syscfg and treats the third
entry as optional. It defaults to 0xf if not present in the devicetree.
Update the schema to require at least two entries, use the same syntax as
the description of renesas,ipmmu-main in
Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006082247.3830719-1-martin@kaiser.cx
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "mediatek,mt8188-rt5682s" to support new board
with rt5682s codec.
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231010023738.8241-2-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
* icc-misc
interconnect: imx: Replace custom implementation of COUNT_ARGS()
interconnect: msm8974: Replace custom implementation of COUNT_ARGS()
interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()
interconnect: fix error handling in qnoc_probe()
interconnect: imx: Replace inclusion of kernel.h in the header
dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The MC virt interconnect in SDX65 DTSI does not have reg. Similarly in
the downstream DTS, thus assume this is an interconnect without own
dedicated IO address space. This fixes dtbs_check warnings like:
qcom-sdx65-mtp.dtb: interconnect-mc-virt: 'reg' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230827114026.47806-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
provisioned at device manufacturing.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231003075339.197099-1-matt@codeconstruct.com.au
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add interconnect driver support for SDX75 platform.
* icc-sdx75
dt-bindings: interconnect: Add compatibles for SDX75
interconnect: qcom: Add SDX75 interconnect provider driver
Link: https://lore.kernel.org/r/1694614256-24109-1-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>anter a commit message to explain why this merge is necessary,
TPS25750 is USB TypeC PD controller which is a subset of TPS6598x.
Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155842.57313-2-alkuor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Exted the opp-v2-kryo-cpu.yaml to support defining OPP tables for the
previous generation of Qualcomm CPUs, 32-bit Krait-based platforms.
It makes no sense to use 'operating-points-v2-kryo-cpu' compatibility
node for the Krait cores. Add support for the Krait-specific
'operating-points-v2-krait-cpu' compatibility string and the relevant
opp-microvolt subclasses properties.
The listed opp-supported-hw values are applicable only to msm8996 /
msm8996pro platforms. Remove the enum as other platforms will use other
bit values. It makes little sense to list all possible values for all
the platforms here.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
TQMLS1088a uses a common board layout with TQMLS1043A/TQMLS1046A.
MBLS10XXA is a starterkit baseboard usable for these SOMs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMLS1043A and TQMLS1046A use the LS1043A LS1046A SOC on a common
layout.
MBLS10XXA is a starterkit baseboard usable for both SOMs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SolidRun now have 2 product lines around NXP Layerscape SoC:
- LX2160A COM Express 7
- LX2162A System on Module
LX2162 is a smaller package and reduced feature set to LX2160A;
LX2162 SoM is also a smaller form factor and reduced feature set to CEX.
Since both product lines are physically incompatible,
the existing group "SolidRun LX2160A based Boards" has been renamed to
include "CEX" in its name, meaning products based on LX2160A COM Express
Module, following this pattern:
"solidrun,<board>", "solidrun,lx2160a-cex", "fsl,lx2160a"
Add DT compatible for both SolidRun LX2162A SoM, and LX2162 Clearfog
boards to a new group based on LX2162A SoM, following this pattern:
"solidrun,<board>", "solidrun,lx2162a-som", "fsl,lx2160a"
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add devicetree binding documentation for Orange Pi 5 Plus SBC made by
Xunlong.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231008130515.1155664-4-megi@xff.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Following the recent cleanups and untanglements, remove abusive
direct references to RPM bus clocks, include the rpm-common YAML and
update Georgi's email.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-6-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Separate out MSM8939 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
This was the final one, so also retire the shared file.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-5-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Separate out MSM8996 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-4-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Separate out SDM660 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-3-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
After the recent reshuffling, bus clocks are no longer exposed as RPM
clocks. Remove the old description.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-2-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Introduce compatible "qcom,scmi-smc" for SCMI smc/hvc transport channel for
Qualcomm virtual platforms.
This compatible mandates populating an additional parameter 'capability-id'
from the last 8 bytes of the shmem channel.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20231009191437.27926-2-quic_nkela@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
These vendor prefixes are used by some routers supported
by e.g. OpenWrt.
- ADI Engineering is a US telecom equipment company.
- Arcom Controllers is a US manufacturer of repeaters.
- Freecom Gmbh is a german telecom equipment company.
- Gemtek Technology is a Taiwan telecom company.
- Gateway Communications was a telecommunication company,
now acquired by HKT Limited/PCCW.
- Goramo Gorecki is a privately owned Polish telecom
company.
- U.S. Robotics Corporation, known through their brand name
USRobotics is generally referred to as "USR" so use this
prefix for the company's device tree bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v3-1-ec46edd1ff0e@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow A7xx SKUs, such as the A730 GPU found on SM8450 and friends.
They use GMU for all things DVFS, just like most A6xx GPUs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559281/
Signed-off-by: Rob Clark <robdclark@chromium.org>
When booting the GMU, the QMP mailbox should be pinged about some tunables
(e.g. adaptive clock distribution state). To achieve that, a reference to
it is necessary. Allow it and require it with A730.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559279/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The GMU on the A7xx series is pretty much the same as on the A6xx parts.
It's now "smarter", needs a bit less register writes and controls more
things (like inter-frame power collapse) mostly internally (instead of
us having to write to G[PM]U_[CG]X registers from APPS)
The only difference worth mentioning is the now-required DEMET clock,
which is strictly required for things like asserting reset lines, not
turning it on results in GMU not being fully functional (all OOB requests
would fail and HFI would hang after the first submitted OOB).
Describe the A730 and A740 GMU.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559278/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add dt compatible for the phyGATE-Tauri-L board. It uses the
phyCORE-i.MX8MM SoM
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CSI IP found inside the Renesas RZ/V2M SoC can also work
in SPI target mode.
When working in target mode, the IP will make use of the SS
(Slave Selection) pin, with "low" as default active level.
The active level of SS can be changed to "high" upon setting
property "spi-cs-high" to true.
By default, the SS will be used in target mode, unless property
"renesas,csi-no-ss" is set to true, in which case data will be
shifted in and out purely based on clock activity, and the
logic level of the SS pin will be completely ignored.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230927162508.328736-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make it explicit that child nodes have additional properties and the
child node schema is not complete. The complete schemas are applied
separately based the compatible strings.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Patchwork: https://patchwork.freedesktop.org/patch/559387/
Link: https://lore.kernel.org/r/20230925212434.1972368-2-robh@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Patchwork: https://patchwork.freedesktop.org/patch/559385/
Link: https://lore.kernel.org/r/20230925212434.1972368-1-robh@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.
Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-2-lpieralisi@kernel.org
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,r9a07g043u-irqc" is added
for RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006121058.13890-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Document support for the Serial Communication Interface with FIFO (SCIF)
available in the Renesas RZ/G3S (R9A08G045) SoC. SCIF interface in
Renesas RZ/G3S is similar to the one available in RZ/G2L.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regular expression pattern for matching serial node children should
accept only nodes starting and ending with the set of words: bluetooth,
gnss, gps or mcu. Add missing brackets to enforce such matching.
Fixes: 0c559bc8ab ("dt-bindings: serial: restrict possible child node names")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Closes: https://lore.kernel.org/all/20231004170021.36b32465@aktux/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231005093247.128166-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device tree binding for the onsemi MT9M114 CMOS camera sensor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d09 ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
On i.MX8MQ the MIPI CSI block does have an associated power-domain, but
the CSI bridge does not.
Remove the power-domains requirement from the i.MX8MQ CSI bridge
to fix the following schema warning:
imx8mq-librem5-r4.dtb: csi@30a90000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
Fixes: de65538684 ("media: dt-bindings: media: imx7-csi: Document i.MX8M power-domains property")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231004201105.2323758-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
-----BEGIN PGP SIGNATURE-----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=+NT7
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.6
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
The clint of Sophgo's sg2042 is based off IP designed by T-HEAD, and
implements the not yet frozen ACLINT spec. This spec seems to be
abandoned, and will not be frozen in the predictable future.
Frozen specs required by the RISC-V maintainers before merging content
relating to those extensions, therefore a generic compatible is not
appropriate.
Instead, add new vendor specific compatible strings to identify mswi of
sg2042 clint.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[conor: re-wrote commit message to drop irrelevant sifive,clint discussion]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The clint of Sophgo's sg2042 is based off IP designed by T-HEAD, but
Sophgo changes this IP layout to fit its cpu design and is incompatible
with the standard sifive clint. The timer and ipi device are on the
different address, and can not be handled by the sifive,clint dt-bindings.
If we use the same compatible string for mswi and timer of the sg2042
clint like sifive,clint, the DT may be like this:
mswi: interrupt-controller@94000000 {
compatible = "sophgo,sg2042-clint", "thead,c900-clint";
interrupts-extended = <&cpu1intc 3>;
reg = <0x94000000 0x00010000>;
};
timer: timer@ac000000 {
compatible = "sophgo,sg2042-clint", "thead,c900-clint";
interrupts-extended = <&cpu1intc 7>;
reg = <0xac000000 0x00010000>;
};
Since the address of mswi and timer are different, it is hard to merge
them directly. So we need two DT nodes to handle both devices.
If we use this DT for SBI, it will parse the mswi device in the timer
initialization as the compatible string is the same, so will mswi.
As they are different devices, this incorrect initialization will cause
the system unusable.
There is a more robust ACLINT spec. can handle this situation, but
the spec. seems to be abandoned and will not be frozen in the predictable
future.
So it is not the time to add ACLINT spec in the kernel bindings. Instead,
using vendor bindings is more acceptable.
Add new vendor specific compatible strings to identify timer of sg2042
clint.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The C920 is RISC-V CPU cores from T-HEAD Semiconductor.
Notably, the C920 core is used in the SOPHGO's SG2042 SoC.
Acked-by: Chao Wei <chao.wei@sophgo.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add compatibles for the Libretech cottonwood board family
Co-developed-by: Da Xue <da.xue@libretech.co>
Signed-off-by: Da Xue <da.xue@libretech.co>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231006103500.2015183-2-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The 'clocks' property is mandatory for the PWM to operate.
Document it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
imx28 uses the same PWM block that is found on imx23.
Add an entry for fsl,imx28-pwm.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Many of the users of operating-points-v2-kryo-cpu scales interconnect
bandwidth based on the selected opp. Extend the binding to allow the
opp-peak-kBps property, inherited from opp-v2-base.yaml, to be used to
specify the requested bandwidth.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document the device-tree bindings for Realtek SoCs Type-C.
Realtek DHC (digital home center) RTD SoCs support a Type-C module.
Link: https://lore.kernel.org/lkml/20230904051253.23208-2-stanley_chang@realtek.com/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
- Potential build failure in CS42L43
- Device Tree bindings clean-up for a superseded patch
-----BEGIN PGP SIGNATURE-----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=g4wJ
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
"A couple of small fixes:
- Potential build failure in CS42L43
- Device Tree bindings clean-up for a superseded patch"
* tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector"
mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
Add i.MX95 compatible string which is compatible with i.MX8ULP
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
i.MX8ULP and i.MX93 actually has two interrupts for each gpio
controller, one for Trustzone non-secure world, one for secure world.
And they has one register based, not two as i.MX7ULP or VF610.
Although the Linux Kernel driver gpio-vf610.c could work with
fsl,imx7ulp-gpio compatible, it is based on some tricks did in
device tree with some offset added to base address.
So actually i.MX8ULP/i.MX93 is not compatible with i.MX7ULP.
Last, i.MX93 is directly derived from i.MX8ULP, so make i.MX93 GPIO
compatible with i.MX8ULP
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
"additionalProperties: true" is only for incomplete schemas such as bus
child nodes in a bus's schema. That doesn't apply to the "channel" nodes
in the adi,ad7292 binding, so fix additionalProperties to be false.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20230926164357.100325-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bindings require vdd-supply but the example DTS was missing one. This
fixes dt_binding_check error:
Documentation/devicetree/bindings/iio/light/rohm,bu27010.example.dtb: light-sensor@38: 'vdd-supply' is a required property
Fixes: ce2a8c1600 ("dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20230808063223.80431-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds new DeviceTree bindings for the Analog Devices, Inc. AD2S1210
resolver-to-digital converter.
Co-developed-by: Apelete Seketeli <aseketeli@baylibre.com>
Signed-off-by: Apelete Seketeli <aseketeli@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929-ad2s1210-mainline-v3-1-fa4364281745@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It
has a subset of KX022A functionalities, dropping support for tap, free
fall and tilt detection engines. Also, the register interface is an exact
subset of what is found on KX022A.
Extend the kionix,kx022a.yaml file to support the KX132ACR-LBZ device
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/5c9e03ffad5e6e5970d6e71fb02eab4b652e109f.1695879676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BM1390GLV-Z is a pressure sensor which performs internal temperature
compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa
and sample averaging and IIR filtering is built in sensor. Temperature
measurement is also supported.
Add dt-bindings for the sensor.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/08796e6b28d2c67933b1a1a5eca0f43da322a597.1695727471.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a level shifter flag as found in ancient platform data struct:
level_shifter: 0: VLogic, 1: VDD
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20230927173245.2151083-2-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document properly that Ebisu-support includes the Ebisu-4D variant, so
there won't be confusion what happened with support for this board.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004152751.3917-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Clock definitions for the Renesas RZ/G3S (R9A08G045) SoC, shared by
driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZR6r3AAKCRCKwlD9ZEnx
cMFIAQCZQI4mAt0qCYu6CLGP0Rmvwp2RyJPJXJrV0MofqmwsiwD/U4cLvVkXvErH
q9+FdZqM4SutANWbYqMyFGO7L8/NtA4=
=ZbVp
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a08g045-dt-binding-defs-tag' into renesas-dts-for-v6.7
Renesas RZ/G3S DT Binding Definitions
Clock definitions for the Renesas RZ/G3S (R9A08G045) SoC, shared by
driver and DT source files.
i.MX27 has only one Sahara interrupt. i.MX53 has two.
Describe this difference.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Describe the clocks (ipg and ahb) needed by Sahara block to operate.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the title, there is no need to mention "included in some i.MX chips"
as it is too vague.
Remove it to make it simpler.
While at it, also remove the extra space in the first reg entry.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add mt8188 svs compatible in dt-bindings.
Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230921052637.30444-2-chun-jen.tseng@mediatek.com
Document the Renesas SMARC Carrier-II EVK board which is based on the
Renesas RZ/G3S SMARC SoM. The SMARC Carrier-II EVK consists of an
RZ/G3S SoM module and a SMARC Carrier-II carrier board; the SoM module
sits on top of the carrier board.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-27-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost
identical to the one available in RZ/G2{L,UL}, the exception being some
core clocks as follows:
- The SD clock is composed of a mux and a divider, and the divider
has some limitations (div = 1 cannot be set if mux rate is 800MHz),
- There are 3 SD clocks,
- The OCTA and TSU clocks are specific to RZ/G3S,
- PLL1/4/6 are specific to RZ/G3S with its own computation formula.
Even with this RZ/G3S could use the same bindings as RZ/G2L.
Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse
Generator (CPG) core clocks, module clocks and resets were added.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-13-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On SM8450 and SM8550 based platforms, the Type-C plug orientation is given on a
GPIO line for each connector which are set by the PMIC(s).
Document this optional Type-C connector property, and take the
assumption an active level represents an inverted/flipped orientation.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231002-topic-sm8550-upstream-type-c-orientation-v2-1-125410d3ff95@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a compatible entry for the NXP CBDTU02043 GPIO-based mux hardware
used for connecting, disconnecting and switching orientation of
the SBU lines in USB Type-C applications.
CBTU02043 datasheet: https://www.nxp.com/docs/en/data-sheet/CBTU02043.pdf
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230927123511.45085-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The imx8dl FEC has the same programming model as the one on the imx8qxp.
Add the imx8dl compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926111017.320409-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
make dt_binding_check:
field-active-even: missing type definition
The property is named "field-even-active", not "field-active-even".
Fixes: 3ab7801dfa ("media: dt-bindings: media: rcar-vin: Describe optional ep properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c999eef0a14c8678f56eb698d27b2243e09afed4.1696328563.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Variable DT_SCHEMA_FILES can specify multiple files or patterns, but the
documentation does not indicate how to do it. Each entry needs to be
separated by a column symbol ':'.
Add an example to make it more obvious how to specify multiple
DT_SCHEMA_FILES.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231002183813.1702052-1-hugo@hugovil.com
Signed-off-by: Rob Herring <robh@kernel.org>
The unit address in the example does not match the reg property.
Correct the unit address to match reality.
Fixes: 3e7bf4685e ("dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/7b93655219a6ad696dd3faa9f36fde6b094694a9.1696330005.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
imx8mp.dtsi passes #sound-dai-cells = <0> in the micfil node.
Document #sound-dai-cells to fix the following schema warning:
audio-controller@30ca0000: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20231004122935.2250889-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
The AW88261 chip doesn't have a reset gpio, so remove it from the
bindings and from the driver.
Convert binding from text format to YAML.
Additions to original text binding:
- add rs485 reference.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230927160153.2717788-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX UART can be used as a wake-up source, document the 'wakeup-source'
property as allowed property.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230921192729.71259-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
imx23 and imx28 are SoCs from the same family (mxs) and they share the
same AUART block, so the same programming model.
imx23 is the first member of this family. It had an AUART DMA erratum.
imx28 is the second member of this family and has this erratum fixed.
imx28.dtsi uses the following description:
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
Make it valid so that the following schema warning could be avoided:
imx28-apx4devkit.dtb: serial@8006a000: compatible: ['fsl,imx28-auart', 'fsl,imx23-auart'] is too long
from schema $id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230921133733.224602-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MediaTek MT6366 PMIC is similar to the MT6358 PMIC. It is designed
to be paired with the MediaTek MT8186 SoC. It has 9 buck regulators and
29 LDO regulators, not counting ones that feed internally and basically
have no controls. The regulators are named after their intended usage
for the SoC and system design, thus not named generically as ldoX or
dcdcX, but as vcn33 or vgpu.
The differences compared to the MT6358 are minimal:
- Regulators removed: VCAMA1, VCAMA2, VCAMD, VCAMIO, VLDO28
- Regulators added: VM18, VMDDR, VSRAM_CORE
Both PMIC models contain a chip ID register at the same address that
can be used to differentiate the actual model. Thus, even though the
MT6366 is not fully backward compatible with the MT6358, it still falls
back on the MT6358 compatible string. It is up to the implementation
to use the chip ID register as a probing mechanism.
Update the MT6358 regulator binding and add entries for all the MT6366's
regulators and their supplies. The regulator node names follow a cleaned
up style without type prefixes and with underscores replaced with hyphens.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
[wens@chromium.org: major rework and added commit message]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6358 PMIC has various regulator power supply pins that should be
supplied from external power sources or routed from one of its outputs.
Add these regulator supplies to the binding. The names are the actual
names from the datasheet, with hyphens replacing underscores.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6358 PMIC allows changing operating modes for the buck regulators,
but not the LDOs. Existing device trees and the Linux implementation
already utilize this through the standard regulator-allowed-modes
property.
The values currently used in existing device trees are simply raw
numbers. The values in the Linux driver are matching numbers defined
with macros denoting the two supported modes. Turns out these two
modes are common across parts of the larger MT63xx PMIC family. The
MT6397 regulator binding already has macros for the two modes, with
matching numbers.
Codify the supported values for regulator-allowed-modes for the MT6358
in the device tree binding: 0 and 1 are supported for buck regulators,
and the property should not be present for LDO regulators. Users should
use the dt-bindings/regulator/mediatek,mt6397-regulator.h header for
the macros, instead of using raw numbers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert this from the old style text based binding to the new DT schema
style. This will make adding the MT6366 portion easier.
The examples have been trimmed down considerably, and the remaining
entries now match what is seen in actual device trees, minus some
properties that aren't covered by the bindings yet, or don't make
sense on their own.
The original submitter seems to have left MediaTek, so instead the
submitter and maintainer for the MT6366 binding is listed as the
maintainer here.
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS5754/6 power amplifiers use the same pcm512x driver with
only minor restictions described in the bindings document.
Signed-off-by: Joerg Schambacher <joerg.hifiberry@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929150555.405388-1-joerg.hifiberry@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AW88261 chip doesn't have a reset GPIO, so disallow providing
reset-gpios.
At the same time also don't keep reset-gpios required for AW88395. This
is both because the Linux driver has it optional, and it also simplifies
the bindings by not introducing another conditional.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231002-aw88261-reset-v2-1-837cb1e7b95c@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Including:
- Arm SMMU fixes from Will Deacon:
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
- Intel VT-d fix from Lu Baolu:
- Fix a suspend/hibernation problem in iommu_suspend()
- Mediatek driver: Fix page table sharing for addresses over 4GiB
- Apple/Dart: DMA_FQ handling fix in attach_dev()
-----BEGIN PGP SIGNATURE-----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=NT6P
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Arm SMMU fixes from Will Deacon:
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
- Intel VT-d fix from Lu Baolu:
- Fix a suspend/hibernation problem in iommu_suspend()
- Mediatek driver: Fix page table sharing for addresses over 4GiB
- Apple/Dart: DMA_FQ handling fix in attach_dev()
* tag 'iommu-fixes-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Avoid memory allocation in iommu_suspend()
iommu/apple-dart: Handle DMA_FQ domains in attach_dev()
iommu/mediatek: Fix share pgtable for iova over 4GB
iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range
dt-bindings: arm-smmu: Fix SDM630 clocks description
iommu/arm-smmu-v3: Avoid constructing invalid range commands
fsl,imx6-hdmi.yaml makes a reference to synopsys,dw-hdmi.yaml.
The 'interrupts' and 'reg' properties are described in synopsys,dw-hdmi.yaml,
so use 'unevaluatedProperties: false' so that these two properties can
be accepted.
This fixes the following schema warnings:
hdmi@120000: 'interrupts', 'reg' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230930130102.798822-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
imx27.dtsi describes its usb nodes as:
compatible = "fsl,imx27-usb";
Adjust the bindings to allow it and avoid the following schema warning:
usb@10024000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx27-usb'] is too short
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230924160351.692867-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.
By default, USB TX and RX threshold are not enabled. To enable
TX or RX threshold, both packet threshold count and max burst size
properties must be set to a valid non-zero value.
In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912041904.30721-2-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event irq interrupts supported by this controller
(one for each port of multiport). Added all the 4 as non-optional
interrupts for SC8280XP-MP
Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM
IRQ's related to 4 ports of SC8280XP Teritiary controller.
Also added ss phy irq for both SS Ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230828133033.11988-2-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce st,stm32mp13-rng compatible and add st,rng-lock-conf.
If st,rng-lock-conf is set, the RNG configuration in RNG_CR, RNG_HTCR
and RNG_NSCR will be locked. It is supported starting from the RNG
version present in the STM32MP13
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the compatible string for QCom ICE on sa8775p SoCs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These are teh latest bug fixes that have come up in the soc tree.
Most of these are fairly minor. Most notably, the majority of
changes this time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had
a simple bug that resulted in invalid data, and a lesser fix for
the optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts"
soc driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems
with clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot
time warnings and errors
-----BEGIN PGP SIGNATURE-----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=HAuE
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the latest bug fixes that have come up in the soc tree. Most
of these are fairly minor. Most notably, the majority of changes this
time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had a
simple bug that resulted in invalid data, and a lesser fix for the
optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts" soc
driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot time
warnings and errors"
* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
MAINTAINERS: Fix Florian Fainelli's email address
arm64: defconfig: enable syscon-poweroff driver
ARM: locomo: fix locomolcd_power declaration
soc: loongson: loongson2_guts: Remove unneeded semicolon
soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
soc: loongson: loongson_pm2: Populate children syscon nodes
dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
soc: loongson: loongson_pm2: Drop useless of_device_id compatible
dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
soc: loongson: loongson_pm2: Add dependency for INPUT
arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
ARM: uniphier: fix cache kernel-doc warnings
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
arm64: dts: imx8mm-evk: Fix hdmi@3d node
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
arm64: dts: imx8mp: Fix SDMA2/3 clocks
...
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties as needed, and then add any missing properties
flagged by the addition.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926164446.101327-1-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more details:
- Add missing additionalProperties on child nodes to the pata-common DT
bindings (Rob).
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas).
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias).
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me).
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk driver
resume operation not being synchronized with libata EH port resume
handling. This is addressed by changing the scsi disk driver disk
start/stop control to allow libata to execute disk suspend (spin
down) and resume (spin up) on its own during system suspend/resume.
Runtime suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races.
- Establish a link between ATA ports and SCSI devices to order PM
operations.
- Fix device removal to avoid issues with driver rmmod removal.
- Fix synchronization of libata device rescan and SCSI disk resume
operation.
- Remove libsas PM operations as suspend/resume is handled directly
by the sas controller resume.
- Fix the SCSI disk driver to not issue commands to suspended disks,
thus avoiding potential system lock-up on resume.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZRbR0gAKCRDdoc3SxdoY
dkArAP9PFTRgsXEwfE7arBXCwQqXj/W0R2KgKug7Fno+SoQLnAD/ZKe2TR50uwxr
9mwYROdMgi50T9ax1RX1jWA0npGXmQg=
=cFzG
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
The Anbernic RG-Nano is a portable handheld console from Anbernic which
uses the Allwinner V3s SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230929144441.3409-4-macroalpha82@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
- Fix the binding for versaclock3 that was introduced this merge window
so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate
-----BEGIN PGP SIGNATURE-----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=RdLn
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A bunch of clk driver fixes for issues found recently:
- Fix the binding for versaclock3 that was introduced this merge
window so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
clk: sprd: Fix thm_parents incorrect configuration
clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
clk: vc3: Fix output clock mapping
clk: vc3: Fix 64 by 64 division
dt-bindings: clock: versaclock3: Add description for #clock-cells property
There's generally no need to use definitions to reference from
individual properties. All the property names are the same, and all the
defined properties are used by all the users.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230928194126.1146622-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
drm-misc-next for v6.7-rc1:
UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
opened by the display server for a client, the correct owner is
displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
recycling.
Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.
Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.
Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
especially related to how the modeset sequence works and
the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
To complement panel-simple.yaml, create panel-simple-lvds-dual-ports.yaml.
panel-simple-lvds-dual-ports.yaml is for all simple LVDS panels that
have dual LVDS ports and require only a single power-supply.
The first port receives odd pixels, and the second port receives even pixels.
Optionally, a backlight and an enable GPIO can be specified as properties.
Panels with swapped pixel order, if any, need dedicated bindings.
Migrate 'auo,g133han01', 'auo,g185han01', 'auo,g190ean01',
'koe,tx26d202vm0bwa' and 'nlt,nl192108ac18-02d' over to the new file.
The objectives with one file for all the simple LVDS panels with dual ports are:
- Make it simpler to add bindings for this kind of LVDS panels
- Keep the number of bindings file lower
- Keep the binding documentation for this kind of LVDS panels more consistent
- Make it possible for drivers to get pixel order via
drm_of_lvds_get_dual_link_pixel_order(), as the 'ports' property is required
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1613017672-2734-1-git-send-email-victor.liu@nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926164553.102914-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
programmable switching frequency to optimize efficiency.
The brightness can be controlled either by I2C commands (called "analog"
mode) or by a PWM input signal (PWM mode).
This driver supports both modes.
For device driver details, please refer to:
- drivers/video/backlight/mp3309c_bl.c
The datasheet is available at:
- https://www.monolithicpower.com/en/mp3309c.html
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230925122609.78849-1-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from wangweidong.a@awinic.com:
The awinic aw87390 is a new high efficiency, low noise,
constant large volume, 6th Smart K audio amplifier.
