mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-12-24 05:39:33 +00:00
16a1d96835
3209 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mark Pearson
|
318d97849f |
platform/x86: think-lmi: Add bulk save feature
On Lenovo platforms there is a limitation in the number of times an attribute can be saved. This is an architectural limitation and it limits the number of attributes that can be modified to 48. A solution for this is instead of the attribute being saved after every modification allow a user to bulk set the attributes and then trigger a final save. This allows unlimited attributes. This patch introduces a save_settings attribute that can be configured to either single or bulk mode by the user. Single mode is the default but customers who want to avoid the 48 attribute limit can enable bulk mode. Displaying the save_settings attribute will display the enabled mode. When in bulk mode writing 'save' to the save_settings attribute will trigger a save. Once this has been done a reboot is required before more attributes can be modified. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230919141530.4805-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Adam Guerin
|
37b14f2dfa |
crypto: qat - enable dc chaining service
QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.
Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.
When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.
As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Simon Arlott
|
d8a5c0d6a4 |
docs: ABI: sysfs-tty: close times are in centiseconds
The times for close_delay and closing_wait are in centiseconds, not milliseconds. Fix the documentation and add details of special values. Signed-off-by: Simon Arlott <simon@octiron.net> Link: https://lore.kernel.org/r/30fa035a-709f-58cd-fc1e-fef1367dc6dd@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Giovanni Cabiddu
|
7ba9858344 |
Documentation: ABI: debugfs-driver-qat: fix fw_counters path
The debugfs description for fw_counters reports an incorrect path
indicating a qat folder that does not exist. Fix it.
Fixes:
|
||
|
Marius Cristea
|
33ec3e5fc1 |
iio: adc: adding support for MCP3564 ADC
This is the iio driver for Microchip family of 153.6 ksps, Low-Noise 16/24-Bit Delta-Sigma ADCs with an SPI interface (Microchip's MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R, MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R, MCP3562R and MCP3564R analog to digital converters). Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20230829154133.40716-3-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Ramona Bolboaca
|
94a39f2c44 |
iio: Add IIO_DELTA_VELOCITY channel type
The delta velocity is defined as a piece-wise integration of acceleration data. The delta velocity represents the linear velocity change between two consecutive measurements and it is measured in m / s (meters per second). In order to track the total linear velocity change during a desired period of time, simply sum-up the delta velocity samples acquired during that time. IIO currently does not offer a suitable channel type for this type of measurements hence this patch adds it. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230808075059.645525-3-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Ramona Bolboaca
|
744f4990ee |
iio: Add IIO_DELTA_ANGL channel type
The delta angle is defined as a piece-wise integration of angular velocity data. The delta angle represents the amount of angular displacement between two consecutive measurements and it is measured in radians. In order to track the total angular displacement during a desired period of time, simply sum-up the delta angle samples acquired during that time. IIO currently does not offer a suitable channel type for this type of measurements hence this patch adds it. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230808075059.645525-2-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Ard Biesheuvel
|
944834901a |
Documentation: Drop or replace remaining mentions of IA64
Drop or update mentions of IA64, as appropriate. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Linus Torvalds
|
2be6bc48df |
- Core Frameworks
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
- New Drivers
- Add support for NXP PCA995x I2C Constant Current LED Driver
- New Device Support
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
- Fix-ups
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not required
- Omit the use of redundant casts and if relevant replace with better ones
- Use purpose-built APIs for various actions; sysfs_emit(), module_led_trigger()
- Remove a bunch of superfluous locking
- Bug Fixes
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check
-----BEGIN PGP SIGNATURE-----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=wNmv
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
New Drivers:
- Add support for NXP PCA995x I2C Constant Current LED Driver
New Device Support:
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
Fix-ups:
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not
required
- Omit the use of redundant casts and if relevant replace with better
ones
- Use purpose-built APIs for various actions; sysfs_emit(),
module_led_trigger()
- Remove a bunch of superfluous locking
Bug Fixes:
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check"
* tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (40 commits)
leds: aw2013: Enable pull-up supply for interrupt and I2C
dt-bindings: leds: Document pull-up supply for interrupt and I2C
dt-bindings: leds: aw2013: Document interrupt
leds: uleds: Use module_misc_device macro to simplify the code
leds: trigger: netdev: Use module_led_trigger macro to simplify the code
dt-bindings: leds: Fix reference to definition of default-state
leds: turris-omnia: Drop unnecessary mutex locking
leds: turris-omnia: Use sysfs_emit() instead of sprintf()
leds: Make leds_class a static const structure
leds: Remove redundant of_match_ptr()
dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
dt-bindings: leds: rohm,bd71828: Drop select:false
leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
leds: multicolor: Use rounded division when calculating color components
leds: rgb: Add a multicolor LED driver to group monochromatic LEDs
dt-bindings: leds: Add binding for a multicolor group of LEDs
leds: class: Store the color index in struct led_classdev
leds: Provide devm_of_led_get_optional()
leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
...
|
||
|
Linus Torvalds
|
92901222f8 |
f2fs update for 6.6-rc1
In this cycle, we don't have a highlighted feature enhancement, but mostly
have fixed issues mainly in two parts: 1) zoned block device, 2) compression
support. For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases caused by
wrong compression policy and logics. Other than them, there were some reverts
and stat corrections.
Bug fix:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and clean-ups.
-----BEGIN PGP SIGNATURE-----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=Qa8+
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we don't have a highlighted feature enhancement, but
mostly have fixed issues mainly in two parts: 1) zoned block device,
and 2) compression support.
For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases
caused by wrong compression policy and logics. Other than them, there
were some reverts and stat corrections.
Bug fixes:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and
clean-ups"
* tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (25 commits)
f2fs: use finish zone command when closing a zone
f2fs: compress: fix to assign compress_level for lz4 correctly
f2fs: fix error path of f2fs_submit_page_read()
f2fs: clean up error handling in sanity_check_{compress_,}inode()
f2fs: avoid false alarm of circular locking
Revert "f2fs: do not issue small discard commands during checkpoint"
f2fs: doc: fix description of max_small_discards
f2fs: should update REQ_TIME for direct write
f2fs: fix to account cp stats correctly
f2fs: fix to account gc stats correctly
f2fs: remove unneeded check condition in __f2fs_setxattr()
f2fs: fix to update i_ctime in __f2fs_setxattr()
Revert "f2fs: fix to do sanity check on extent cache correctly"
f2fs: increase usage of folio_next_index() helper
f2fs: Only lfs mode is allowed with zoned block device feature
f2fs: check zone type before sending async reset zone command
f2fs: compress: don't {,de}compress non-full cluster
f2fs: allow f2fs_ioc_{,de}compress_file to be interrupted
f2fs: don't reopen the main block device in f2fs_scan_devices
f2fs: fix to avoid mmap vs set_compress_option case
...
|
||
|
Linus Torvalds
|
b89b029377 |
SCSI misc on 20230902
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas) and the usual minor updates and bug fixes but no significant core changes. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZPLlcCYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXH4AP9Mm8Hk ICCySnXJ/VcxrAU2ekUlPxGT8CNT2WqRhIqKegEAu0jagPyNcTjX+oBCNVOM33zU p5uU6IEHDA3d36qu04w= =8gks -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas) and the usual minor updates and bug fixes but no significant core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (116 commits) scsi: storvsc: Handle additional SRB status values scsi: libsas: Delete sas_ata_task.retry_count scsi: libsas: Delete sas_ata_task.stp_affil_pol scsi: libsas: Delete sas_ata_task.set_affil_pol scsi: libsas: Delete sas_ssp_task.task_prio scsi: libsas: Delete sas_ssp_task.enable_first_burst scsi: libsas: Delete sas_ssp_task.retry_count scsi: libsas: Delete struct scsi_core scsi: libsas: Delete enum sas_phy_type scsi: libsas: Delete enum sas_class scsi: libsas: Delete sas_ha_struct.lldd_module scsi: target: Fix write perf due to unneeded throttling scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE scsi: pm8001: Remove unused declarations scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock scsi: elx: sli4: Remove code duplication scsi: bfa: Replace one-element array with flexible-array member in struct fc_rscn_pl_s scsi: qla2xxx: Remove unused declarations scsi: pmcraid: Use pci_dev_id() to simplify the code scsi: pm80xx: Set RETFIS when requested by libsas ... |
||
|
James Bottomley
|
e03843a0f0 | Merge branch 'fixes' into misc | ||
|
Linus Torvalds
|
1c9f8dff62 |
Char/Misc driver changes for 6.6-rc1
Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+ t9KG0iMDXRuTsOqeEQbd =tVnk -----END PGP SIGNATURE----- Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ... |
||
|
Linus Torvalds
|
51e7accbe8 |
USB / Thunderbolt / PHY driver update for 6.6-rc1
Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPIAOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn80gCgybzMp0YnSildFetSC8lUJTnzjQcAn3KWzb75
Zt72jxGl4ZOXHEpozG4O
=FLrK
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
|
||
|
Linus Torvalds
|
e2c874f999 |
platform-drivers-x86 for v6.6-1
Highlights:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add SEL-3350 platform driver:
- Add SEL-3350 platform driver
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
MAINTAINERS:
- Add entries for Siemens IPC modules
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next:
- Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next
Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans
Move all simatic ipc drivers to the subdirectory siemens:
- Move all simatic ipc drivers to the subdirectory siemens
asus-wmi:
- corrections to egpu safety check
- Fix support for showing middle fan RPM
- expose dGPU and CPU tunables for ROG
- support setting mini-LED mode
- add safety checks to gpu switching
- don't allow eGPU switching if eGPU not connected
- add WMI method to show if egpu connected
- support middle fan custom curves
- add support for showing middle fan RPM
- add support for showing charger mode
dell-sysman:
- Fix reference leak
doc:
- TPMI: Add debugfs documentation
hp-bioscfg:
- Update steps order list elements are evaluated
- Use kmemdup() to replace kmalloc + memcpy
- Remove duplicate use of variable in inner loop
- Change how password encoding size is evaluated
- Change how enum possible values size is evaluated
- Change how order list size is evaluated
- Change how prerequisites size is evaluated
- Replace the word HACK from source code
- Fix uninitialized variable errors
- Fix memory leaks in attribute packages
- fix error reporting in hp_add_other_attributes()
- prevent a small buffer overflow
- fix a signedness bug in hp_wmi_perform_query()
- MAINTAINERS
- Makefile
- surestart-attributes
- string-attributes
- spmobj-attributes
- passwdobj-attributes
- order-list-attributes
- int-attributes
- enum-attributes
- biosattr-interface
- bioscfg
- bioscfg-h
- Documentation
ideapad-laptop:
- Add support for keyboard backlights using KBLC ACPI symbol
leds:
- simatic-ipc-leds: default config switch to platform switch
mlx-platform:
- Add dependency on PCI to Kconfig
mlxbf-bootctl:
- Support sysfs entries for MFG fields
- Support setting the ARM boot state to "OS up"
- Support the large icmc write/read
p2sb:
- Make the Kconfig symbol hidden
platform:
- mellanox: nvsw-sn2201: change fans i2c busses.
- mellanox: mlxreg-hotplug: Extend condition for notification callback processing
- mellanox: Add initial support for PCIe based programming logic device
- mellanox: mlx-platform: Get interrupt line through ACPI
- mellanox: mlx-platform: Introduce ACPI init flow
- mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
- mellanox: mlx-platform: Add reset callback
- mellanox: Cosmetic changes
- mellanox: mlx-platform: Modify power off callback
- mellanox: mlx-platform: add support for additional CPLD
- mellanox: mlx-platform: Add reset cause attribute
- mellanox: mlx-platform: Modify health and power hotplug action
- mellanox: Modify reset causes description
- mellanox: Add field upgrade capability register
- mellanox: Add new attributes
- Explicitly include correct DT includes
platform/x86/amd/pmc:
- Fix build error with randconfig
- Move PMC driver to separate directory
platform/x86/amd/pmf:
- Fix a missing cleanup path
- Use str_on_off() helper
platform/x86/intel/tpmi:
- Add debugfs interface
- Read feature control status
platform/x86/siemens:
- simatic-ipc-batt: fix logical error for BX-59A
- simatic-ipc: fix logical error for BX-59A
- simatic-ipc-batt: fix wrong pointer pass to PTR_ERR()
- simatic-ipc-batt: add support for module BX-59A
- simatic-ipc: add new models BX-56A/BX-59A
- Kconfig: adjust help text
- simatic-ipc-batt: fix bat reading in BX_21A
simatic-ipc:
- use extra module loading for watchdog
- add auto-loading of hwmon modules
- add another model
- drop PCI runtime depends and header
- add CMOS battery monitoring
- add another model BX-21A
system76:
- Handle new KBLED ACPI methods
thinkpad_acpi:
- Switch to memdup_user_nul() helper
- use lockdep annotations
- take mutex for hotkey_mask_{set,get}
tools/power/x86/intel-speed-select:
- v1.17 release
- Change mem-frequency display name
- Prevent CPU 0 offline
- Error on CPU count exceed in request
- Support more than 8 sockets.
- Fix CPU count display
watchdog:
- simatic: Use idiomatic selection of P2SB
- simatic: add PCI dependency
- make Siemens Simatic watchdog driver default on platform
- simatic-ipc-wdt: make IO region access of one model muxed
wmi-bmof:
- Update MAINTAINERS entry
- Simplify read_bmof()
- Use device_create_bin_file()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTx720UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wHYggAgPpl4tcbqUK7S/fwVP2SzBKI+eF3
5PjO7PlMEVzyKyjHdkqoV8miMffWAGVPE+LV33Uifs5WTFjHRq2fq/Esvj9mAstG
1fCoHJ442xYkwNCUT1CCP7VsmcvV5eFXBjBantvwmIs8TyknGHwtq1h+d95evp4n
2uyQlRMmrWh/+8fjD8x5V35T0tky+4a4EX2WNLul13LlHCybGT/F2Kq456WdthjJ
zTQSL+qAMWmAiQKSEmhI3bRnFYPdpTetjiNSTlQczch8Y4qV3mJQlnkyDPX7SM9w
M2uZ4W39Ptxihx0ks/MIcuA4yrTfUX8BnhMTD29ZYCKHS7xBqW8YC5HQug==
=GaQL
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
|
||
|
Linus Torvalds
|
4ad0a4c234 |
powerpc updates for 6.6
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system.
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix
MMU to avoid a broadcast TLBIE flush on exit.
- Drop the exclusion between ptrace/perf watchpoints, and drop the now unused
associated arch hooks.
- Add support for the "nohlt" command line option to disable CPU idle.
- Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1.
- Rework memory block size determination, and support 256MB size on systems
with GPUs that have hotpluggable memory.
- Various other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev,
Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand,
Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin
Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He,
Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara
R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick
Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell
Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav
Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, Zheng Zengkai.
-----BEGIN PGP SIGNATURE-----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=5g7K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
||
|
Linus Torvalds
|
cd99b9eb4b |
Documentation work keeps chugging along; stuff for 6.6 includes:
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
||
|
Linus Torvalds
|
1544df9ab4 |
ARM: SoC drivers for 6.6
The main change this time is the introduction of the drivers/genpd subsystem that gets split out from drivers/soc to keep common functionality together. Ulf Hansson is taking over maintainership for these and is sending a separate pull request with the same commits, but they are in the soc drivers tree to avoid conflicts against other soc driver patches. The SCMI driver subsystem gets an update to version 3.2 of the specification. There are also updates to memory, reset and other firmware drivers. On the soc driver side, the updates are mostly cleanups across a number of Arm platforms. On driver for loongarch adds power management for DT based systems, another driver is for HiSilicon's Arm server chips with their HCCS system health interface. The remaining updates for the most part add support for additional hardware in existing drivers or contain minor cleanups. Most of these are for the Qualcomm Snapdragon platform. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTuWdMACgkQYKtH/8kJ UicprBAAsvZ5h636MOwYasgK1bKnsWgj9yrBSzIf7VzKbBS5/QCrDSDek9oDvTBp p6Rr+WC1RQl9i2DiRVSbEqkUS6X4hQF0kJdLudBwYuxBDf8ayzFzKAKk/ecsyoaC 0Rkeh4fCu1zVnQ2DZSPFJVRl01/oCr1ZtJ1W0UrXCslOSQy2987VqpJ/EQbaDLgb 3imxpvJNBscaKwcYRgxhcIMBLdGi3qXRE/TmAf1WMe8w6dfk5KmFiPPD7zxPTnFb 0fssdxgocjOkXEn6L1VdBMoTt4UQaU+xbnFsOsDA/F0EjR9ZLlhtwZxANv4GicP6 52FMFaxeXSUnpBelzuyRQpgnt9WW3ZbBGb9iaisTl1pwjC3PcN2noo8uFZk+kO6b 8q0fh4KVmD0QIupC4cfTsF4SGAQvnhko2ls9bt4FTF+z0COV3Ifs2cAggH+hn3yD IziBrUUZrR4G8XhisJRQNZcRh1H/vVchcumqsxzCMhpXLWwdZ5vW85GCR/fAtQQT woYgqFHXZjEko66bu2dtayr1dgmPvfbO6rXpUkIdeskY6XuKfZXuB93LkhsZ17LY dfAaBLUebjMcpLrltCqyP1tUoqGyVOTJKxtB2MolHo/V/2JbKYmYHAMy+qX5I0Qm UUbQDpHnkaQMTK2L/qvdfE4lgwWfFWX7lCK/AGa4ZBFl+Zl6DgE= =xmHW -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "The main change this time was the introduction of the drivers/genpd subsystem that gets split out from drivers/soc to keep common functionality together. The SCMI driver subsystem gets an update to version 3.2 of the specification. There are also updates to memory, reset and other firmware drivers. On the soc driver side, the updates are mostly cleanups across a number of Arm platforms. On driver for loongarch adds power management for DT based systems, another driver is for HiSilicon's Arm server chips with their HCCS system health interface. The remaining updates for the most part add support for additional hardware in existing drivers or contain minor cleanups. Most of these are for the Qualcomm Snapdragon platform" * tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits) bus: fsl-mc: Use common ranges functions soc: kunpeng_hccs: fix some sparse warnings about incorrect type soc: loongson2_pm: add power management support soc: dt-bindings: add loongson-2 pm soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 bus: ti-sysc: Fix cast to enum warning soc: kunpeng_hccs: add MAILBOX dependency MAINTAINERS: remove OXNAS entry dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated irqchip: irq-versatile-fpga: remove obsolete oxnas compatible soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller soc: kunpeng_hccs: fix size_t format string soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX dt-bindings: firmware: qcom: scm: Updating VMID list firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP firmware: imx: scu-irq: add imx_scu_irq_get_status ... |
||
|
Linus Torvalds
|
1a35914f73 |
integrity-v6.6
-----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZO0WoxQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5alsAP0UZQIKI2zEjFdtucgClcSouflIOC5i Hvtgv3qVFXPZQwEA2H/SGjigtH5NruVXECDZdrIfaGGvBhyeY72lbswXfQ0= =Gu8i -----END PGP SIGNATURE----- Merge tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: - With commit |
||
|
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
||
|
Linus Torvalds
|
b96a3e9142 |
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
||
|
Linus Torvalds
|
68cf01760b |
This update includes the following changes:
API: - Move crypto engine callback from tfm ctx into algorithm object. - Fix atomic sleep bug in crypto_destroy_instance. - Move lib/mpi into lib/crypto. Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10. Drivers: - Add AES skcipher and aead support to starfive. - Add Dynamic Boost Control support to ccp. - Add support for STM32P13 platform to stm32. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmTsZkMACgkQxycdCkmx i6furw//e6kYK1CTOqidPM6nI0KK1Ok204VXu56H0wM4THZ09ZwcbDNKpvI6vjMi XZkKthiayl/1okmpRVP0rPqMWDtxajeu6IUAQqqFGUFU8R7AqCDrOd+te+zlSFWG 16ySNQO47RND0OzNqZ4ojgCC0n9RpP+zOfndmderZ4EnfXSbodwGUwkcuE7Z96cP jNoainO2iwlyMZPlVynrw61O3RxGu/s/ch+uY1mV+TyvAAWoOlzt57gYUs3eGduz 4Ky+0Ubctg3sfBaqA2Hg6GjtAqG/QUssRyj8YgsFMrgXPHDTbLh6abej39wWo4gz ZdC7Bm47hV/yfVdWe2iq3/5iqdILEdPBh3fDh6NNsZ1Jlm3aEZpH9rEXm0k4X2MJ A9NDAFVj8dAYVZza7+Y8jPc8FNe+HqN9HYip/2K7g68WAJGWnMc9lq9qGwGmg1Gl dn6yM27AgH8B+UljWYM9FS1ZFsc8KCudJavRZqA2d0W3rbXVWAoBBp83ii0yX1Nm ZPAblAYMZCDeCtrVrDYKLtGn566rfpCrv3R5cppwHLksGJsDxgWrjG47l9uy5HXI u05jiXT11R+pjIU2Wv5qsiUIhyvli6AaiFYHIdZ8fWaovPAOdhrCrN3IryvUVHj/ LqMcnmW1rWGNYN9pqHn0sQZ730ZJIma0klhTZOn8HPJNbiK68X0= =LbcA -----END PGP SIGNATURE----- Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Move crypto engine callback from tfm ctx into algorithm object - Fix atomic sleep bug in crypto_destroy_instance - Move lib/mpi into lib/crypto Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10 Drivers: - Add AES skcipher and aead support to starfive - Add Dynamic Boost Control support to ccp - Add support for STM32P13 platform to stm32" * tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits) Revert "dt-bindings: crypto: qcom,prng: Add SM8450" crypto: chelsio - Remove unused declarations X.509: if signature is unsupported skip validation crypto: qat - fix crypto capability detection for 4xxx crypto: drivers - Explicitly include correct DT includes crypto: engine - Remove crypto_engine_ctx crypto: zynqmp - Use new crypto_engine_op interface crypto: virtio - Use new crypto_engine_op interface crypto: stm32 - Use new crypto_engine_op interface crypto: jh7110 - Use new crypto_engine_op interface crypto: rk3288 - Use new crypto_engine_op interface crypto: omap - Use new crypto_engine_op interface crypto: keembay - Use new crypto_engine_op interface crypto: sl3516 - Use new crypto_engine_op interface crypto: caam - Use new crypto_engine_op interface crypto: aspeed - Remove non-standard sha512 algorithms crypto: aspeed - Use new crypto_engine_op interface crypto: amlogic - Use new crypto_engine_op interface crypto: sun8i-ss - Use new crypto_engine_op interface crypto: sun8i-ce - Use new crypto_engine_op interface ... |
||
|
Linus Torvalds
|
b547f9b300 |
power supply and reset changes for the 6.6 series
* core: avoid duplicate hwmon device from thermal framework * convert multiple drivers to devm_platform_ioremap_resource * at91-reset: add sysfs interface to the power on reason * misc. small fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmTlQMgACgkQ2O7X88g7 +ppBog//T9P+yTClsJTkuoNt8IMelvFcy0OPifmBRfXg0fJJyEXXrgBXcGZS5dxs GqrLK4RPnFFoFyuK/umd0RbIWVrhFVR4AH0Xp8fZuxqFLAa4m0Hg4cnOGchZgYbR hLva+jtyor8Avr6JPAP80W0lx02vJTloDe/KR8Rdf7YtmxsNi/I/3MmOfof+mCmn 7hCBKdEp5VzX08J+1zBx4tzDaQ8s0MSMkJRcogGHcG11D3j4aVzNqJ8HFVCHRQZd D+IcPg5VgRT3YyO2OosF/WcBdJWhKUpZjoLR2ukpIr1vpbX238aa4Y5Il+ovdNxr IFp/MJkFO+NEIpGxvzjSdBLJq4GxyBeyv7uweRs1MWF+bwzFlXxRzvLcwbGymsCF 6cHJy6ynkpXuFAUY0txB7x2TDGzB9nPUZ71OIE7zhkfuYsBGlZRwu+DnipqTSd0R MyAjsr8shCmYWG4PU1WDfhgvpBNEqxjllP5sdy7om7DmC2vvaCqiBcXOykm3DMbL G2/9M6elfv9hLpHoWvfCsKNCEXUD4vXugtcoUSKs91YqlAlQpKG14BHt4aKWfsI7 CVcil8O+k+u7Gzn5QxI4x6G8ymP0NCnNwbj8cpZioyaORekwp2NUicUVIw03DKBf MggZqTukcs5J8g157Og+BDOsy2zCRur67k9JeFMvZO00hwsCxvc= =Tt7S -----END PGP SIGNATURE----- Merge tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - core: avoid duplicate hwmon device from thermal framework - convert multiple drivers to devm_platform_ioremap_resource - at91-reset: add sysfs interface to the power on reason - misc small fixes and improvements * tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: qcom_pmi8998_charger: fix charger status power: supply: qcom_pmi8998_charger: remove CHARGE_CONTROL_LIMIT_* props power: supply: qcom_pmi8998_charger: fix uninitialized variable power: reset: oxnas-restart: remove obsolete restart driver power: supply: core: Avoid duplicate hwmon device from thermal framework power: reset: ocelot: Convert to devm_platform_ioremap_resource() power: reset: msm: Convert to devm_platform_ioremap_resource() power: reset: gemini-poweroff: Convert to devm_platform_ioremap_resource() power: reset: brcm-kona: Convert to devm_platform_ioremap_resource() power: reset: at91-sama5d2_shdwc: Convert to devm_platform_ioremap_resource() power: reset: at91-poweroff: Convert to devm_platform_ioremap_resource() power: reset: at91-reset: add sysfs interface to the power on reason power: supply: bd99954: make read-only array sub_status_reg power: supply: bq24190: Considers FORCE_20PCT when getting IPRECHG power: Explicitly include correct DT includes |
||
|
Linus Torvalds
|
670f08971c |
chrome platform changes for 6.6
* Improvements
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync.
- Support official HID "GOOG0016" for ChromeOS ACPI.
* Fixes
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER.
* Misc
- Update MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZOwPUBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0nSkBAKotxdetlYni+PbaoBjMQgRRLhM9GE7i
JS9UQGmzdR46AP0SGUPrqWJcjtsIYxeemVTMqOkIjihp06xLR3r1USeEBw==
=P8Uo
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync
- Support official HID "GOOG0016" for ChromeOS ACPI
Fixes:
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER
Misc:
- Update MAINTAINERS"
* tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
platform/chrome: chromeos_acpi: support official HID GOOG0016
platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout
MAINTAINERS: update maintainers of chrome-platform
|
||
|
Linus Torvalds
|
6f49693a6c |
Updates for the CPU hotplug core:
- Support partial SMT enablement.
So far the sysfs SMT control only allows to toggle between SMT on and
off. That's sufficient for x86 which usually has at max two threads
except for the Xeon PHI platform which has four threads per core.
Though PowerPC has up to 16 threads per core and so far it's only
possible to control the number of enabled threads per core via a
command line option. There is some way to control this at runtime, but
that lacks enforcement and the usability is awkward.
This update expands the sysfs interface and the core infrastructure to
accept numerical values so PowerPC can build SMT runtime control for
partial SMT enablement on top.
The core support has also been provided to the PowerPC maintainers who
added the PowerPC related changes on top.
- Minor cleanups and documentation updates.
-----BEGIN PGP SIGNATURE-----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=JQRJ
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the CPU hotplug core:
- Support partial SMT enablement.
So far the sysfs SMT control only allows to toggle between SMT on
and off. That's sufficient for x86 which usually has at max two
threads except for the Xeon PHI platform which has four threads per
core
Though PowerPC has up to 16 threads per core and so far it's only
possible to control the number of enabled threads per core via a
command line option. There is some way to control this at runtime,
but that lacks enforcement and the usability is awkward
This update expands the sysfs interface and the core infrastructure
to accept numerical values so PowerPC can build SMT runtime control
for partial SMT enablement on top
The core support has also been provided to the PowerPC maintainers
who added the PowerPC related changes on top
- Minor cleanups and documentation updates"
* tag 'smp-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Fix state names
cpu/hotplug: Remove unused function declaration cpu_set_state_online()
cpu/SMT: Fix cpu_smt_possible() comment
cpu/SMT: Allow enabling partial SMT states via sysfs
cpu/SMT: Create topology_smt_thread_allowed()
cpu/SMT: Remove topology_smt_supported()
cpu/SMT: Store the current/max number of threads
cpu/SMT: Move smt/control simple exit cases earlier
cpu/SMT: Move SMT prototypes into cpu_smt.h
cpu/hotplug: Remove dependancy against cpu_primary_thread_mask
|
||
|
Eric DeVolder
|
88a6f89944 |
crash: memory and CPU hotplug sysfs attributes
Introduce the crash_hotplug attribute for memory and CPUs for use by
userspace. These attributes directly facilitate the udev rule for
managing userspace re-loading of the crash kernel upon hot un/plug
changes.
For memory, expose the crash_hotplug attribute to the
/sys/devices/system/memory directory. For example:
# udevadm info --attribute-walk /sys/devices/system/memory/memory81
looking at device '/devices/system/memory/memory81':
KERNEL=="memory81"
SUBSYSTEM=="memory"
DRIVER==""
ATTR{online}=="1"
ATTR{phys_device}=="0"
ATTR{phys_index}=="00000051"
ATTR{removable}=="1"
ATTR{state}=="online"
ATTR{valid_zones}=="Movable"
looking at parent device '/devices/system/memory':
KERNELS=="memory"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{auto_online_blocks}=="offline"
ATTRS{block_size_bytes}=="8000000"
ATTRS{crash_hotplug}=="1"
For CPUs, expose the crash_hotplug attribute to the
/sys/devices/system/cpu directory. For example:
# udevadm info --attribute-walk /sys/devices/system/cpu/cpu0
looking at device '/devices/system/cpu/cpu0':
KERNEL=="cpu0"
SUBSYSTEM=="cpu"
DRIVER=="processor"
ATTR{crash_notes}=="277c38600"
ATTR{crash_notes_size}=="368"
ATTR{online}=="1"
looking at parent device '/devices/system/cpu':
KERNELS=="cpu"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{crash_hotplug}=="1"
ATTRS{isolated}==""
ATTRS{kernel_max}=="8191"
ATTRS{nohz_full}==" (null)"
ATTRS{offline}=="4-7"
ATTRS{online}=="0-3"
ATTRS{possible}=="0-7"
ATTRS{present}=="0-3"
With these sysfs attributes in place, it is possible to efficiently
instruct the udev rule to skip crash kernel reloading for kernels
configured with crash hotplug support.
For example, the following is the proposed udev rule change for RHEL
system 98-kexec.rules (as the first lines of the rule file):
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
When examined in the context of 98-kexec.rules, the above rules test if
crash_hotplug is set, and if so, the userspace initiated
unload-then-reload of the crash kernel is skipped.
CPU and memory checks are separated in accordance with CONFIG_HOTPLUG_CPU
and CONFIG_MEMORY_HOTPLUG kernel config options. If an architecture
supports, for example, memory hotplug but not CPU hotplug, then the
/sys/devices/system/memory/crash_hotplug attribute file is present, but
the /sys/devices/system/cpu/crash_hotplug attribute file will NOT be
present. Thus the udev rule skips userspace processing of memory hot
un/plug events, but the udev rule will evaluate false for CPU events, thus
allowing userspace to process CPU hot un/plug events (ie the
unload-then-reload of the kdump capture kernel).
Link: https://lkml.kernel.org/r/20230814214446.6659-5-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
David Thompson
|
7e38a7422f |
mlxbf-bootctl: Support sysfs entries for MFG fields
This patch extends the mlxbf-bootctl driver's sysfs entries to support read and write access for the manufacturing (MFG) fields in the board-level EEPROM. The MFG fields are set once during the board manufacturing phase, and then the MFG fields are write-protected. Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com> Link: https://lore.kernel.org/r/20230821183939.3229-1-davthompson@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Marek Behún
|
44f0fb8dfe |
leds: trigger: netdev: rename 'hw_control' sysfs entry to 'offloaded'
Commit |
||
|
Greg Kroah-Hartman
|
a65ce15718 |
First set of Counter updates for the 6.6 cycle
This set consists primarily of minor clean-ups. The counter_priv() 'const' attribute change does yield a small improvement in reducing the binary size. Changes * rz-mtu3-cnt - Reorder locking sequence for consistency * Documentation - sysfs-bus-counter: Fix indentation * counter - Declare counter_priv() to be const * microchip-tcb-capture - Explicitly include correct DT includes -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZN+bCQAKCRC1SFbKvhIj K9X9AQCJJKkhUtsB8Q0NqfFWbNynLoKZAN5b+jzXM6x8wcoyqAD9F8mblAz80YG7 8XIZXH9DkFKknfeRVOHEBlPFx1vpDws= =dpP8 -----END PGP SIGNATURE----- Merge tag 'counter-updates-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.6 cycle This set consists primarily of minor clean-ups. The counter_priv() 'const' attribute change does yield a small improvement in reducing the binary size. Changes * rz-mtu3-cnt - Reorder locking sequence for consistency * Documentation - sysfs-bus-counter: Fix indentation * counter - Declare counter_priv() to be const * microchip-tcb-capture - Explicitly include correct DT includes * tag 'counter-updates-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: rz-mtu3-cnt: Reorder locking sequence for consistency Documentation: ABI: sysfs-bus-counter: Fix indentation counter: Declare counter_priv() to be const counter: Explicitly include correct DT includes |
||
|
Greg Kroah-Hartman
|
7ccecc84ef |
thunderbolt: Changes for v6.6 merge window
This includes following Thunderbolt/USB4 changes for the v6.6 merge window: - Replace broken mailing list address in the ABI document - Small improvements. All these have been in linux-next with no reported issues. -----BEGIN PGP SIGNATURE----- iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAmTkfGsgHG1pa2Eud2Vz dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKBDZhAAi7BjitUFsFOv 6VsNuhztPaO5GKqlDwBfIST2/k6qzdPJSBMwr6biMLcloNkehyRlRPSPgHPEjbv/ lqF7BkUpg7Ghw164VBq0nU1WKq6u/+HvoZL5Tkacz87ObWyfX7s/BfeOm1nW7++t kROG39ZZhLKG1RASqWRJsu3eSZIpbSXD2c7ErnuNRNobPqrx3ts1gS0FBiZwZfG6 96lG1cSNlujjQFreKIikz/CIgpgCFkdcw5cEieHY13wSNU90gMEcZ1PEKz48eMMI E70RrfwEQd8f+M239JLSmer2Kh1dx90RJ8GJKsS4UyxBn07r7FXoBeo3DMaNLKB0 PIMW5G5dsRJr7tqpOSJIHpprmAMlOL4xMBQ+XlsJiSPYCC+xeFPxVyIqdLdCpxjF NWSJExiSDgFkOPJQltu91egFWWQBXXugGxbxkFvQsqwF0JU6oD5XIESVK5Lq3SvT xOQdpMQFVXOQCqYTZ2Xc2K/bAO/EYbJVLoRbSBGcwXHyiHe3Vyc4agcCPrxDqbU1 SxD1GgTU0ooHdkikbIeGEj5VUsMRRNSJVxvUXGZlhh0GCy/c/KYOur2AG9vIwi3T RYtik2MY2mtT+wTE1Kb8gmPv4xtog6LpNfEINF+bBat7rUCKO5KlUnLcVJbVmTW4 lQhBqTv2W9Aki36iewRVPAjZ/7kZMUY= =US+s -----END PGP SIGNATURE----- Merge tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v6.6 merge window This includes following Thunderbolt/USB4 changes for the v6.6 merge window: - Replace broken mailing list address in the ABI document - Small improvements. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: Documentation/ABI: thunderbolt: Replace 01.org in contact thunderbolt: Check Intel vendor ID in tb_switch_get_generation() thunderbolt: Log a warning if device links are not found thunderbolt: Set variable tmu_params storage class specifier to static |
||
|
SeongJae Park
|
d3d21d91ae |
Docs/ABI/damon: update for DAMON monitoring target type DAMOS filter
Update DAMON ABI document for the newly added DAMON monitoring target type DAMOS filter. Link: https://lkml.kernel.org/r/20230802214312.110532-13-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
2beb97fcbf |
Docs/ABI/damon: update for address range DAMOS filter
Update DAMON ABI document for address ranges type DAMOS filter files. Link: https://lkml.kernel.org/r/20230802214312.110532-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
e91b5ccf1f |
Docs/ABI/damon: update for tried_regions/total_bytes
Update the DAMON ABI document for newly added schemes/.../tried_regions/total_bytes file and the update_schemes_tried_bytes command. Link: https://lkml.kernel.org/r/20230802213222.109841-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Chao Yu
|
726865e69a |
f2fs: doc: fix description of max_small_discards
The description of max_small_discards is out-of-update in below two aspects, fix it. - it is disabled by default - small discards will be issued during checkpoint Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Bjorn Helgaas
|
ebab9426cd |
Documentation/ABI: Fix typos
Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Randy Dunlap
|
d03668803b |
HWPOISON: offline support: fix spelling in Documentation/ABI/
Correct spelling problems as identified by codespell.
Link: https://lkml.kernel.org/r/20230710052223.18254-1-rdunlap@infradead.org
Fixes:
|
||
|
Jean-Jacques Hiblot
|
c7d80059b0 |
leds: class: Store the color index in struct led_classdev
Store the color of the LED so that it is not lost after the LED's name has been composed. This color information can then be exposed to the user space or used by the LED consumer. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Link: https://lore.kernel.org/r/20230728153731.3742339-3-jjhiblot@traphandler.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Kajol Jain
|
8df9906694 |
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_partition sysfs interface file
Add details of the new hv-gpci interface file called "affinity_domain_via_partition" in the ABI documentation. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230729073455.7918-11-kjain@linux.ibm.com |
||
|
Kajol Jain
|
ab7e991286 |
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_domain sysfs interface file
Add details of the new hv-gpci interface file called "affinity_domain_via_domain" in the ABI documentation. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230729073455.7918-9-kjain@linux.ibm.com |
||
|
Kajol Jain
|
cc89ff3491 |
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_virtual_processor sysfs interface file
Add details of the new hv-gpci interface file called "affinity_domain_via_virtual_processor" in the ABI documentation. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230729073455.7918-7-kjain@linux.ibm.com |
||
|
Kajol Jain
|
3255171d3e |
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document processor_config sysfs interface file
Add details of the new hv-gpci interface file called "processor_config" in the ABI documentation. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230729073455.7918-5-kjain@linux.ibm.com |
||
|
Kajol Jain
|
9caf9e2b8b |
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document processor_bus_topology sysfs interface file
Add details of the new hv-gpci interface file called "processor_bus_topology" in the ABI documentation. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230729073455.7918-3-kjain@linux.ibm.com |
||
|
Biju Das
|
3a91388002 |
Documentation: ABI: sysfs-bus-counter: Fix indentation
Fix the indentation of the KernelVersion, Contact, and Description in external_input_phase_clock_select_available block by replacing spaces with tabs similar to other blocks. Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/r/ZH8D3lCobUJP2T4K@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230721151243.282435-1-biju.das.jz@bp.renesas.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> |
||
|
Randy Dunlap
|
c709d099a0 |
f2fs: fix spelling in ABI documentation
Correct spelling problems as identified by codespell. Fixes: |
||
|
Greg Kroah-Hartman
|
bbb9e06d2c |
Merge 6.5-rc6 into usb-next
We need the USB and Thunderbolt fixes in here to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
e75850b457 |
Merge 6.5-rc6 into char-misc-next
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Arnd Bergmann
|
bb2974ffff |
HiSilicon driver updates for v6.6
- Add HCCS driver for HiSilicon Kunpeng SoC and document the sysfs description -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEQeMYD8qOQTc1R/snC8hXbtmJZlwFAmTWAnIVHHh1d2VpNUBo aXNpbGljb24uY29tAAoJEAvIV27ZiWZcc3kQAK2YCdYhmgueyufgR3HPfhvgOd1E 1yLpyHkSQ8oaC8nOdWu6cTYOWz7doEFeqXumyfxgmW7QgaROHb/zLsXxJvkViEmp 84wwPiXu2acx1bMlCMPOCGQQRZXIf3QN/1FHc5cPz745ej3S3GkOSAKG+SO0c31C EbfM7LTSLkmx0svGGyiJlz30KqFxKIV/4Z/s0tCX5WKfXTLv7WaCLqZRNTHLH5RD S/zYFapmpKtiJg6tUA8irJcIVOOzpF0vQb0ai5qOSS5YvW+DlLDzVqXotxwWYAng 6Jjhc3Nb63xI9aK9YiUxDj2LvWQYJmWdoKEpAtQaNU+nKN7imjNxT0k4oZZzW/sn UfFjKdx+8U0XD2m6/yyylSSVbu2hdC+68G+IC8L/lcX3lhBqMyuWMxWP1Jo+RX7/ eQhIRYjrRJKG6Yn0v5t5LQnvVx3LIlOnlyrzSW5HqlFdStdaJsz1UDQFr3+NawBf xaO3Lt3ULdIWzRev+KtLyk1w6u6/li3ijo0nfFC16YA8vxLCnW9HBIgplOD6bDHI 1xgZzxPGhaPO0/Cznt80UM5PN6msmwV0DeX1q8uSiaWFDxmS63JK9sjMsaALVvD9 RbjwHWbuLc21sqv3GCe1U7pemuP7KBNvMkaX4ki7O1nZu+ZujRjOW4ewqqBjimcY 4qMotvV6+NYrn4b1 =h9zn -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTXWqcACgkQYKtH/8kJ UidEuhAArmNLbomANfSRvYxhMEdwGTjq/BP117V0hwOGukQJRIBDIytOHfQNpM0r NrmUwZOiqShI7GEBJFyK81SSud3OlVpORMK9OwyV5BhptjGU8PnNzYXZiMm3Q4NL r+QlYqcSJ++Sct7kteXgNJO5K2Y7mcAPiKzSlYY5O1WcWa57L8qT3ot4RhYRWuok 1rICh1qKqiqqEW/AqCdqvx9KlKZhzGInvAKY3QgJVec2JVUevAO72Dpp8jmPwogH K/pF4y7qNPH96NyUSr1+eYYgwUEH5vikCUl/pa/bkMJ4s1qO5zvNou2UCD+Ku1aw 5oxjDyS7fxMRgPx38YcJ5oeFVNjmwW1DkChA+RqUCtdEOdegrn2IJbdCTXaAASxO B85NfF6ZmTzZuO/Re5RtgEoGnbq1FiGV2gh9iQLA0VRo+HdodSyfBKWGVo0foi78 XjGstnfU6lR8noaOaUcI/FJAVWcIIgw2mHo4ybZmOo0P3H1k6hD9wNxTPh6w+DAE pgBUI1LiHo0CymbNpVVyTgGHqlVIxq3KyhezbShNlnHUa8XqDILDRW/VdFB9Wno7 XtkkSadw7gorNaFJFh/3PZqbaY/5ongwcAvDMLJXcBmLwRWWIXe2BAJ7MFJzpuXb oBsyMxcmfNa/Hcg2L6Ca9HlRCTq1l+Hi6T38F9YPTwdeRmFrv10= =Xt7M -----END PGP SIGNATURE----- Merge tag 'hisi-drivers-for-6.6' of https://github.com/hisilicon/linux-hisi into soc/drivers HiSilicon driver updates for v6.6 - Add HCCS driver for HiSilicon Kunpeng SoC and document the sysfs description * tag 'hisi-drivers-for-6.6' of https://github.com/hisilicon/linux-hisi: doc: soc: hisilicon: Add Kunpeng HCCS driver documentation soc: hisilicon: add sysfs entry to query information of HCCS soc: hisilicon: Support HCCS driver on Kunpeng SoC Link: https://lore.kernel.org/r/64D605DE.2070303@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Greg Kroah-Hartman
|
22884cf84c |
FSI changes for v6.6
* New drivers for the I2C Responder master and SCOM device * Misc janitor fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmTV7UQACgkQa3ZZB4FH cJ4Mbg//fI3gE56QIsMYNu2YfJb8ZFFH5xD/xn9xwAv34i/XudhX6eCigEHl420Z B/7yPyDePBK8f+Phb9pL1VCovnwdsG/7j3BMtVRV5172bGgkUGpIyNIS7K47/yhJ wRs9qmQsHu3PbKKzStdxxgOOZxiMZc8KzZjDYVBcWmX9RBTe6C4n8WpHbcvI3sIU YTdbfSOyZQIlurJuEtwa7FFOAWUTD66gvvpDWZZn1Ns0hh4WsNWQ0mIqVxVSr8Rl +hISZfBopZMAvMVt8LHvldBUUVAcb9z0KdsAuEe+DXv0uzkTN4FGxFD5YEloGnzR o0eYc7M6vEvH46qhLKYIXRLgLD+SM2+RRhMNaOhxbdVsw7+PWDUz7OWIsoPHmExP 9cmJhZKg/l2JlVPxh+6NOjx2ygK1h0vkADZWc8UoiZD9ZHXFzEYTjuRvaa4YH9HN ENOh3S+9i2Zrue0EWNBSIEaKvKG6h63cUoZSSU4AMtMwC1H5JPKOyYtC+8+oLFsw HmRjxls5zdOLcK9JwPR80xSD/CRadT88qpkvRyFfWyuHenazJzo2HHCgrbVgDXq0 wvR2/c2MWqhZ94LASnd4gpr7MicS1G5FiZn+csKP2dy2Pv4nyDYkOOmrXw8Q/bGZ X88Ohipm9imC0LVIRvXusrmKUUp5dzpQePaQoAaC8/KH8PqRC0U= =FLoZ -----END PGP SIGNATURE----- Merge tag 'fsi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joen writes: FSI changes for v6.6 * New drivers for the I2C Responder master and SCOM device * Misc janitor fixes * tag 'fsi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: fix some spelling mistakes in comment fsi: master-ast-cf: Add MODULE_FIRMWARE macro docs: ABI: fix spelling/grammar in SBEFIFO timeout interface fsi: Add I2C Responder SCOM driver fsi: Add IBM I2C Responder virtual FSI master dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master fsi: Lock mutex for master device registration fsi: Improve master indexing fsi: core: Switch to ida_alloc/free fsi: core: Fix legacy minor numbering fsi: core: Add trace events for scan and unregister fsi: aspeed: Reset master errors after CFAM reset fsi: sbefifo: Remove limits on user-specified read timeout fsi: sbefifo: Add configurable in-command timeout fsi: sbefifo: Don't check status during probe fsi: Use of_match_table for bus matching if specified fsi: Add aliased device numbering fsi: Move fsi_slave structure definition to header fsi: Use of_property_read_reg() to parse "reg" fsi: Explicitly include correct DT includes |
||
|
Greg Kroah-Hartman
|
43fbd50649 |
1st set of IIO new device support, features and cleanup for 6.6
New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.
Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.
Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.
-----BEGIN PGP SIGNATURE-----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=hTrR
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.6
New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.
Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.
Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.
* tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
Documentation: ABI: testing: admv8818: add bypass
drivers: iio: filter: admv8818: add bypass mode
iio: light: bd27008: Support BD27010 RGB
iio: light: bu27008: add chip info
dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
iio: add MCP4728 I2C DAC driver
dt-bindings: iio: dac: add mcp4728.yaml
drivers: iio: admv1013: add vcc regulators
dt-bindings: iio: admv1013: add vcc regulators
iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata()
iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver
dt-bindings: iio: admv1014: make all regs required
iio: cdc: ad7150: relax return value check for IRQ get
iio: mb1232: relax return value check for IRQ get
iio: adc: fix the return value handle for platform_get_irq()
tools: iio: iio_generic_buffer: Fix some integer type and calculation
iio: potentiometer: mcp4531: Use i2c_get_match_data()
iio: potentiometer: mcp4018: Use i2c_get_match_data()
iio: core: Fix issues and style of the comments
iio: core: Switch to krealloc_array()
...
|
||
|
Randy Dunlap
|
2cd9ec2a51 |
docs: ABI: fix spelling/grammar in SBEFIFO timeout interface
Correct spelling problems as identified by codespell.
Correct one grammar error.
Fixes:
|
||
|
Linus Torvalds
|
30813656c6 |
dmaengine fixes for v6.5
- HAS_IOMEM fixes for fsl edma and intel idma - Return value fix, interrupt vector setting and typo fix for xilinx xdma - Email updates for codeaurora email domain move - correct pause status for pl330 driver - idxd clear flag on disable fix - function documentation fix for owl dma - potential un-allocated memory fix for mcf driver -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmTUlVgACgkQfBQHDyUj g0eEQw/8DQbcN/+5S8wGKNgD6rxJmKFHfhkegQerT2/jvr9G++Pz/nyAMre3QBHI DHJnsr+1enupdtYuCZRu91sDpSTP85JKgorRmHs8YizLyqGG1VU4a6X0q0d2Ghwk 5QZSfCEvogVeoilubfMgyTIkn+uOD6Hygqc8+HyAouX29gPNfd23KN4aaLPAL+Di wFvQVYKoOiDmKqcanaDfqUtyy13hV5ZOF33loqFmKaFEMfH40Pn7ZAnpIB/IrPaY WEGUSJvLSRN9GdprdxqHkhOJ8XLCNEDA62x4LHoO/Lnd21V1XfkWtYRPsM7fgSDV Pw5Lhk2/DIqBBfif83C0/9kUrCbe9fd+J5zBnN4lHFGbmccy/oefH80McErCLxtd hvxauI6BT4v53OQg1F9MrNrmwvyGwYTTY+0M4L6iAlZvW08ZQ+8N5YHTV3dvc7Qd 8CTHHWwnlT0UP6KTRqtTGiEkk20I6VaVVd/S1AKPfCXECLi72bbgEct+Ud8bRlX5 kTobnVYpcVZub6OJDZxlTLjuV57Kh5wAYq6ny/FVR//+6KHyd+hB/yjaRqChM+mv ew2n/081Sx3RspB94RT+J5LvPnBR0si6Rdm5GpASyOw54iWkhL22KF4MTTjWvUW6 VyudlCno7e9Fn2WNm1eXblxZhV4F20nSmdBnLmxPGZKMrQdbYMQ= =oNNL -----END PGP SIGNATURE----- Merge tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: - HAS_IOMEM fixes for fsl edma and intel idma - return-value fix, interrupt vector setting and typo fix for xilinx xdma - email updates for codeaurora email domain move - correct pause status for pl330 driver - idxd clear flag on disable fix - function documentation fix for owl dma - potential un-allocated memory fix for mcf driver * tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: xilinx: xdma: Fix typo dmaengine: xilinx: xdma: Fix interrupt vector setting dmaengine: owl-dma: Modify mismatched function name dmaengine: idxd: Clear PRS disable flag when disabling IDXD device dmaengine: pl330: Return DMA_PAUSED when transaction is paused dmaengine: qcom_hidma: Update codeaurora email domain dmaengine: mcf-edma: Fix a potential un-allocated memory access dmaengine: xilinx: xdma: Fix Judgment of the return value idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM |
||
|
Tzung-Bi Shih
|
0820debb7d |
platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
`element->buffer.pointer` should be binary blob. `%s` doesn't work
perfect for them.
Print hex string for ACPI_TYPE_BUFFER. Also update the documentation
to reflect this.
Fixes:
|
||
|
Alan Stern
|
f176638af4 |
USB: Remove Wireless USB and UWB documentation
Support for Wireless USB and Ultra WideBand was removed in 2020 by
commit
|
||
|
Huisong Li
|
b51022b416 |
doc: soc: hisilicon: Add Kunpeng HCCS driver documentation
Document the sysfs attributes description provided by HCCS driver on Kunpeng SoC. Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> |
||
|
Antoniu Miclaus
|
14b7447cec |
Documentation: ABI: testing: admv8818: add bypass
Add documentation for the use of the bypass filter mode. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230731084928.8302-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Mika Westerberg
|
a3f6445842 |
Documentation/ABI: thunderbolt: Replace 01.org in contact
The mailing list on 01.org does not work anymore and the whole site redirects to intel.com Open Source page so replace the 01.org address with my email address. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
|
Linus Torvalds
|
64094e7e31 |
Mitigate Gather Data Sampling issue
* Add Base GDS mitigation * Support GDS_NO under KVM * Fix a documentation typo -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTJh5YACgkQaDWVMHDJ krAzAw/8DzjhAYEa7a1AodCBMNg8uNOPnLNoRPPNhaN5Iw6W3zXYDBDKT9PyjAIx RoIM0aHx/oY9nCpK441o25oCWAAyzk6E5/+q9hMa7B4aHUGKqiDUC6L9dC8UiiSN yvoBv4g7F81QnmyazwYI64S6vnbr4Cqe7K/mvVqQ/vbJiugD25zY8mflRV9YAuMk Oe7Ff/mCA+I/kqyKhJE3cf3qNhZ61FsFI886fOSvIE7g4THKqo5eGPpIQxR4mXiU Ri2JWffTaeHr2m0sAfFeLH4VTZxfAgBkNQUEWeG6f2kDGTEKibXFRsU4+zxjn3gl xug+9jfnKN1ceKyNlVeJJZKAfr2TiyUtrlSE5d+subIRKKBaAGgnCQDasaFAluzd aZkOYz30PCebhN+KTrR84FySHCaxnev04jqdtVGAQEDbTvyNagFUdZFGhWijJShV l2l4A0gFSYJmPfPVuuAwOJnnZtA1sRH9oz/Sny3+z9BKloZh+Nc/+Cu9zC8SLjaU BF3Qv2gU9HKTJ+MSy2JrGS52cONfpO5ngFHoOMilZ1KBHrfSb1eiy32PDT+vK60Y PFEmI8SWl7bmrO1snVUCfGaHBsHJSu5KMqwBGmM4xSRzJpyvRe493xC7+nFvqNLY vFOFc4jGeusOXgiLPpfGduppkTGcM7sy75UMLwTSLcQbDK99mus= =ZAPY -----END PGP SIGNATURE----- Merge tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/gds fixes from Dave Hansen: "Mitigate Gather Data Sampling issue: - Add Base GDS mitigation - Support GDS_NO under KVM - Fix a documentation typo" * tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix backwards on/off logic about YMM support KVM: Add GDS_NO support to KVM x86/speculation: Add Kconfig option for GDS x86/speculation: Add force option to GDS mitigation x86/speculation: Add Gather Data Sampling mitigation |
||
|
Tzung-Bi Shih
|
703e77134e |
platform/chrome: chromeos_acpi: support official HID GOOG0016
Support official HID GOOG0016 for ChromeOS ACPI (see [1]). [1]: https://crrev.com/c/2266713 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20230731024214.908235-1-tzungbi@kernel.org Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> |
||
|
Jeffrey Hugo
|
e2dcbc330f |
dmaengine: qcom_hidma: Update codeaurora email domain
The codeaurora.org email domain is defunct and will bounce. Update entries to Sinan's kernel.org address which is the address in MAINTAINERS for this component. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-By: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Linus Torvalds
|
638c1913d2 |
cxl fixes for v6.5-rc5
- Fixup the Sanitixe device ABI that was merged for v6.5 to hide some sysfs files when the necessary support is missing. Update the ABI documentation around this as well. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCZMvhjwAKCRAPzq5USduL dnifAQC9cl8R0bHhphAMstXUb9/GNh2Vxojr+MJkQweKRtc33gEAhjVVCyZ1mEHh cWjVhtCwIYp/k3h8smBZ2VmK0wXc0wA= =kAni -----END PGP SIGNATURE----- Merge tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Vishal Verma: - Fixup the Sanitixe device ABI that was merged for v6.5 to hide some sysfs files when the necessary support is missing. Update the ABI documentation around this as well. * tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/memdev: Only show sanitize sysfs files when supported cxl/memdev: Document security state in kern-doc cxl/memdev: Improve sanitize ABI descriptions |
||
|
Eric Snowberg
|
f20765fdfd |
integrity: Always reference the blacklist keyring with appraisal
Commit
|
||
|
Greg Kroah-Hartman
|
98a9e32bdf |
Merge 6.5-rc4 into usb-next
We need the USB fixes in here for testing and for other patches to be applied on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Davidlohr Bueso
|
ad64f5952c |
cxl/memdev: Only show sanitize sysfs files when supported
If the device does not support Sanitize or Secure Erase commands, hide the respective sysfs interfaces such that the operation can never be attempted. In order to be generic, keep track of the enabled security commands found in the CEL - the driver does not support Security Passthrough. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://lore.kernel.org/r/20230726051940.3570-4-dave@stgolabs.net Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
|
Davidlohr Bueso
|
0fcde5989e |
cxl/memdev: Improve sanitize ABI descriptions
Be more detailed about the CPU cache management situation. The same goes for both sanitize and secure erase. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://lore.kernel.org/r/20230726051940.3570-2-dave@stgolabs.net Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
|
Michael Ellerman
|
7f48405c3c |
cpu/SMT: Allow enabling partial SMT states via sysfs
Add support to the /sys/devices/system/cpu/smt/control interface for enabling a specified number of SMT threads per core, including partial SMT states where not all threads are brought online. The current interface accepts "on" and "off", to enable either 1 or all SMT threads per core. This commit allows writing an integer, between 1 and the number of SMT threads supported by the machine. Writing 1 is a synonym for "off", 2 or more enables SMT with the specified number of threads. When reading the file, if all threads are online "on" is returned, to avoid changing behaviour for existing users. If some other number of threads is online then the integer value is returned. Architectures like x86 only supporting 1 thread or all threads, should not define CONFIG_SMT_NUM_THREADS_DYNAMIC. Architecture supporting partial SMT states, like PowerPC, should define it. [ ldufour: Slightly reword the commit's description ] [ ldufour: Remove switch() in __store_smt_control() ] [ ldufour: Rix build issue in control_show() ] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20230705145143.40545-8-ldufour@linux.ibm.com |
||
|
Demi Marie Obenour
|
c04e989484 |
xen: speed up grant-table reclaim
When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Takashi Iwai
|
a85ff0db48 |
usb: gadget: midi2: More flexible MIDI 1.0 configuration
This patch allows users to set up MIDI 1.0 ports more flexibly. Namely, instead of the fixed mapping only from FB 0, now multiple block definitions are applied to build up the MIDI 1.0 mapping. The each block config has midi1_first_group and midi1_num_groups attributes, and those specify which Groups are used for MIDI 1.0. Those fields must be within the UMP Groups defined in the block itself. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230725062206.9674-8-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Takashi Iwai
|
29ee7a4ddd |
usb: gadget: midi2: Add configfs support
This patch adds the support of configfs to MIDI 2.0 function driver for users to allow configuring the UMP Endpoint and Function Blocks more flexibly. The configuration is in a tree form. The top-most contains some card-level configurations. UMP Endpoints are defined in subdirectories (ep.0, ep.1, etc) that contain Endpoint-specific configurations such as ep_name, etc. And, UMP Function Blocks are defined in the subdirectories (block.0, block.1, etc) under EP subdirectory. As default, the driver creates a single UMP Endpoint (ep.0) and a single Function Block (block.0) to work in a minimalistic manner. User can modify those attributes freely to fit with the demands. When multiple Function Blocks are required, user can create another directory as block.1, block.2, and so on (up to block.31). A block.* directory can be deleted dynamically, too. A caveat is that the block number has to be continuous. Similarly, when multiple UMP Endpoints are required, user can create another directory as ep.1, ep.2, up to ep.3. Also, some driver behavior can be controlled in the card top-level configs. e.g. you can pass process_ump=0 to disable the processing of UMP Stream messages. This would be equivalent with the older MIDI 2.0 spec that doesn't support UMP v1.1 features. The configfs interface checks upper- / lower-bound of input values, and more sanity checks are performed at binding. Attributes can't be changed any longer once when the instance is linked to UDC. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230725062206.9674-3-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Bart Van Assche
|
7e9609d2da |
scsi: ufs: core: Remove HPB support
Interest among UFS users in HPB has reduced significantly. I am not aware of any current users of the HPB functionality. Hence remove HPB support from the kernel. A note: the work in JEDEC on a successor for HPB is nearing completion. Zoned storage for UFS or ZUFS combines the UFS standard with ZBC-2. Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: ChanWoo Lee <cw9316.lee@samsung.com> Cc: Daejun Park <daejun7.park@samsung.com> Cc: Keoseong Park <keosung.park@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230719165758.2787573-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Waqar Hameed
|
5e1cd3e97e |
iio: Add event enums for running period and count
There are devices (such as Murata IRS-D200 PIR proximity sensor) that check the data signal with a running period. I.e. for a specified time, they count the number of conditions that have occurred, and then signal if that is more than a specified amount. `IIO_EV_INFO_PERIOD` resets when the condition no longer is true and is therefore not suitable for these devices. Add a new `iio_event_info` `IIO_EV_INFO_RUNNING_PERIOD` that can be used as a running period. Also add a new `IIO_EV_INFO_RUNNING_COUNT` that can be used to specify the number of conditions that must occur during this running period. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/ee4a801ae9b9c4716c7bd23d8f79f232351df8bd.1689753076.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jonathan Corbet
|
16182e4a3e |
docs: ABI: fix an RST error in sysfs-bus-nvdimm
The literal blocks in this file lacked the necessary blank line at the top, causing Sphinx to complain: /Documentation/ABI/testing/sysfs-bus-nvdimm:11: WARNING: Unexpected indentation. Add the lines it's longing for and bring about a bit of warning peace. Reported-by: Hu Haowen <src.res.211@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Damian Muszynski
|
359b84f8db |
crypto: qat - add heartbeat feature
Under some circumstances, firmware in the QAT devices could become unresponsive. The Heartbeat feature provides a mechanism to detect unresponsive devices. The QAT FW periodically writes to memory a set of counters that allow to detect the liveness of a device. This patch adds logic to enable the reporting of those counters, analyze them and report if a device is alive or not. In particular this adds (1) heartbeat enabling, reading and detection logic (2) reporting of heartbeat status and configuration via debugfs (3) documentation for the newly created sysfs entries (4) configuration of FW settings related to heartbeat, e.g. tick period (5) logic to convert time in ms (provided by the user) to clock ticks This patch introduces a new folder in debugfs called heartbeat with the following attributes: - status - queries_sent - queries_failed - config All attributes except config are reading only. In particular: - `status` file returns 0 when device is operational and -1 otherwise. - `queries_sent` returns the total number of heartbeat queries sent. - `queries_failed` returns the total number of heartbeat queries failed. - `config` allows to adjust the frequency at which the firmware writes counters to memory. This period is given in milliseconds and it is fixed for GEN4 devices. Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lucas Segarra Fernandez
|
865b50fe6e |
crypto: qat - add fw_counters debugfs file
Expose FW counters statistics by providing the "fw_counters" file under debugfs. Currently the statistics include the number of requests sent to the FW and the number of responses received from the FW for each Acceleration Engine, for all the QAT product line. This patch is based on earlier work done by Marco Chiappero. Co-developed-by: Adam Guerin <adam.guerin@intel.com> Signed-off-by: Adam Guerin <adam.guerin@intel.com> Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Mario Limonciello
|
2e424c33d8 |
crypto: ccp - Add support for displaying PSP firmware versions
As it's not always obvious what PSP bootloader or TEE version are present in OEM systems, add the ability to get this information from sysfs for supported platforms. Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Daniel Sneddon
|
8974eb5882 |
x86/speculation: Add Gather Data Sampling mitigation
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
||
|
Kamel Bouhara
|
d40befed9a |
power: reset: at91-reset: add sysfs interface to the power on reason
Introduce a list of generic reset sources and use them to export the power on reason through sysfs. Update the ABI documentation to describe this new interface. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> [Miquel Raynal: Follow-up on Kamel's work, 4 years later] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Srinivas Pandruvada
|
40e6c3956b |
doc: TPMI: Add debugfs documentation
Describe fields in the TPMI debugfs folder. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230712225950.171326-4-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Luke D. Jones
|
e0b278e7b5 |
platform/x86: asus-wmi: expose dGPU and CPU tunables for ROG
Expose various CPU and dGPU tunables that are available on many ASUS ROG laptops. The tunables shown in sysfs will vary depending on the CPU and dGPU vendor. All of these variables are write only and there is no easy way to find what the defaults are. In general they seem to default to the max value the vendor sets for the CPU and dGPU package - this is not the same as the min/max writable value. Values written to these variables that are beyond the capabilities of the CPU are ignored by the laptop. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-9-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Luke D. Jones
|
abac4259fc |
platform/x86: asus-wmi: support setting mini-LED mode
Support changing the mini-LED mode on some of the newer ASUS laptops. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-8-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Luke D. Jones
|
d4eca58aaf |
platform/x86: asus-wmi: add WMI method to show if egpu connected
Exposes the WMI method which tells if the eGPU is properly connected on the devices that support it. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-5-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Luke D. Jones
|
77ee9d299e |
platform/x86: asus-wmi: add support for showing charger mode
Expose a WMI method in sysfs platform for showing which connected charger the laptop is currently using. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-2-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Martin K. Petersen
|
e96277a570 |
Merge branch '6.5/scsi-staging' into 6.5/scsi-fixes
Pull in the currently staged SCSI fixes for 6.5. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Jorge Lopez
|
00d4b35212 |
platform/x86: hp-bioscfg: Documentation
Update sysfs-class-firmware-attributes with hp-bioscfg information HP BIOS Configuration driver purpose is to provide a driver supporting the latest sysfs class firmware attributes framework allowing the user to change BIOS settings and security solutions on HP Inc.’s commercial notebooks. Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230608163319.18934-2-jorge.lopez2@hp.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Linus Torvalds
|
946c6b59c5 |
16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues.
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZKmgXAAKCRDdBJ7gKXxA joqDAP0V520Jy0cyJrRMvaQRFMqtVeDOdTpAue7ZOQHSi/LZnAD9EEAxDpYF/V4x PO27ixXQ4Glm2iYgH7bDX7J73WiA3wg= =JsYW -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking |
||
|
Anthony Iliopoulos
|
5a569db68c |
docs: update ocfs2-devel mailing list address
The ocfs2-devel mailing list has been migrated to the kernel.org infrastructure, update all related documentation pointers to reflect the change. Link: https://lkml.kernel.org/r/20230628013437.47030-3-ailiop@suse.com Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Can Guo
|
ef470b862d |
scsi: ufs: core: Update contact email for monitor sysfs nodes
Update contact email addresses for Can Guo and Asutosh Das, replace Subhash Jadavani's contact. Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/20230630003913.3713155-1-quic_cang@quicinc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Linus Torvalds
|
6843306689 |
Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9yzk
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
|
||
|
Linus Torvalds
|
56cbceab92 |
USB / Thunderbolt driver updates for 6.5-rc1
Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the hardware
in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKcVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEIQCgzJgnMCB81mirXlY1ZpCSDFqN8KIAnjRc27/1
vnUzldMQGY/FiS549gD9
=G3yz
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
|
||
|
Linus Torvalds
|
44aeec836d |
Char/Misc and other driver subsystem updates for 6.5-rc1
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
|
||
|
Linus Torvalds
|
c156d4af43 |
- New Drivers
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
- New Device Support
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
- New Functionality
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
- Fix-ups
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
- Bug Fixes
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues
-----BEGIN PGP SIGNATURE-----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=9kd5
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
|
||
|
Subash Abhinov Kasiviswanathan
|
acd9755894 |
Documentation: ABI: sysfs-class-net-qmi: pass_through contact update
Switch to the quicinc.com id.
Fixes:
|
||
|
Linus Torvalds
|
d25f002575 |
cxl for v6.5
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the common
definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZJ9fkQAKCRDfioYZHlFs
ZyWcAP9THJ6ZzX1mbAfHhPz9r+oxsrE3l1jQpNjNbh7MNW29MAEA36dmTE62JaHK
lTPDgHxqBt1vrHPktYWOM9ZPHE2tLwA=
=3fFL
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.
Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.
For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.
For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.
Summary:
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules"
* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...
|
||
|
Linus Torvalds
|
5d95ff84e6 |
This update includes the following changes:
API: - Add linear akcipher/sig API. - Add tfm cloning (hmac, cmac). - Add statesize to crypto_ahash. Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA. - Replace LFSR with SHA3-256 in jitter. - Add interface for gathering of raw entropy in jitter. Drivers: - Fix race on data_avail and actual data in hwrng/virtio. - Add hash and HMAC support in starfive. - Add RSA algo support in starfive. - Add support for PCI device 0x156E in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmSdECcACgkQxycdCkmx i6dW3g//a4DR6aaqYF8pU4svAzO56a0Plx3DVHUiJ4ygRB7xOzrQqXjCren6wY2a LFuetwxebAhIAPsC79vI+3j8VAIlU9cNVqOxBIJHGY7wFO4m1AjqBjlealzqLrth +nEIeUibqLeRw7imOO4adzSsKuSQgyU5rPtKWfrGqqI3RhuMgfWroCtmJ82jmq5l uMZgB+aGGkzyXztxubHRPeJ3nOFEzo95SscpJ43lOjMcURRBhEa+20jXDhUGwpI7 9ycFV31AW+tfkIprAcliiIzZuwIbzlCkte6AxjAVsN100T/wh9JS1Y+uf1P0oZ9y AUQQKyc8/QpSkzHZPTncat5P6zta28r8Q5neCvEEEGGuOE8Oc6kb0Os+RE5ANMU4 2A/zrKGOMIWeEWwXGc51xT3gxyl/Rn5wLw1pW7Lm4d5osGT9jiVXx/g66hKLpagJ jegI6CqgvUajkRNi7JPVnSAauu0Ay8O6pU37/8gLOXNGVZBqONpRimk9qB05LNSF QYzM2sgYv1tQEmjnG8jLhF5Z8brnqYTv2TZwBX43W10EDQNqUYUDff9Flean5xCb +2mxJc81rgtUffnMXyYvQwKLhVKoLpeLR6Ts455S5aP06WAfoyEJyYTA/LHG24GX H2HdS9g5y/K15k9yygMWaXgAx7O7MjM9gEa2VQakhnByj/eQM0s= =rOLu -----END PGP SIGNATURE----- Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ... |
||
|
Linus Torvalds
|
9c3255a8f3 |
platform-drivers-x86 for v6.5-1
Highlights:
- AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
- Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
- Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc. improvements
- Dell-DDV: Add documentation
- INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
- Lenovo Yogabook: Refactor / rework to also support Android models
- Think-LMI: Multiple improvements and fixes
- WMI: Add proper API documentation for the WMI bus
- x86-android-tablets: Misc. new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
ISST:
- Fix usage counter
- Reset default callback on unregister
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
apple-gmux:
- don't use be32_to_cpu and cpu_to_be32
asus-tf103c-dock:
- Switch back to use struct i2c_driver's .probe()
dell-ddv:
- Update ABI documentation
- Add documentation
dell-sysman:
- Improve instance detection
gigabyte:
- constify pointers to hwmon_channel_info
gigabyte-wmi:
- remove allowlist
hp:
- constify pointers to hwmon_channel_info
hp-wmi:
- Add thermal profile for Victus 16-d1xxx
- Add HP Envy special key support
- Add HP WMI camera switch
int3472:
- discrete: Log a warning if the pin-numbers don't match
- discrete: Use FIELD_GET() on the GPIO _DSM return value
- discrete: Add alternative "AVDD" regulator supply name
- discrete: Add support for 1 GPIO regulator shared between 2 sensors
- discrete: Remove sensor_config-s
- discrete: Drop GPIO remapping support
- Switch back to use struct i2c_driver's .probe()
- Evaluate device's _DSM method to control imaging clock
intel/pmc:
- Add Meteor Lake IOE-M PMC related maps
- Add Meteor Lake IOE-P PMC related maps
- Use SSRAM to discover pwrm base address of primary PMC
- Discover PMC devices
- Enable debugfs multiple PMC support
- Add support to handle multiple PMCs
- Combine core_init() and core_configure()
- Update maps for Meteor Lake P/M platforms
- Remove Meteor Lake S platform support
lenovo-yogabook:
- add I2C dependency
- Rename lenovo-yogabook-wmi to lenovo-yogabook
- Add keyboard backlight control to platform driver
- Add platform driver support
- Add YB_KBD_BL_MAX define
- Group WMI specific code together
- Drop _wmi_ from remaining generic symbols
- Add a yogabook_toggle_digitizer_mode() helper function
- Abstract kbd backlight setting
- Stop checking adev->power.state
- Split probe() into generic and WMI specific parts
- Use PMIC LED driver for pen icon LED control
- Add dev local variable to probe()
- Store dev instead of wdev in drvdata struct
- Switch to DEFINE_SIMPLE_DEV_PM_OPS()
- Simplify gpio lookup table cleanup
- Set default keyboard backligh brightness on probe()
- Reprobe devices on remove()
- Fix work race on remove()
mlxbf-bootctl:
- Add sysfs file for BlueField boot log
platform/surface:
- surface3_power: Switch back to use struct i2c_driver's .probe()
platform/x86/amd:
- pmc: Update metrics table info for Pink Sardine
- pmc: Add helper function to check the cpu id
- pmc: Get STB DRAM size from PMFW
- pmc: Pass true/false to bool argument
platform/x86/amd/pmf:
- Fix compiler warnings in static slider
- Add PMF debug facilities
- Add PMF acpi debug support
platform/x86/dell/dell-rbtn:
- Fix resources leaking on error path
platform/x86/intel:
- tpmi: Remove hardcoded unit and offset
platform/x86/intel-uncore-freq:
- tpmi: Provide cluster level control
- Support for cluster level controls
- Uncore frequency control via TPMI
platform/x86/intel/pmc:
- Add resume callback
platform/x86/intel/pmc/mtl:
- Put devices in D3 during resume
system76:
- constify pointers to hwmon_channel_info
think-lmi:
- Don't display unnecessary authentication settings
- Correct NVME index default
- Correct NVME password handling
- Update password fields to use BIT
- Update password attribute comments
- Correct System password interface
- Enable opcode support on BIOS settings
- mutex protection around multiple WMI calls
thinkpad_acpi:
- Fix lkp-tests warnings for platform profiles
tools/power/x86/intel-speed-select:
- v1.16 release
- Fix json formatting issue
- Adjust scope of core-power config
toshiba:
- constify pointers to hwmon_channel_info
wmi:
- Allow retrieving the number of WMI object instances
- Add device specific documentation
- Add documentation
- Mark GUID-based WMI interface as deprecated
- Add kernel doc comments
x86-android-tablets:
- Add support for extra buttons on Cyberbook T116
- Add support for more then 1 gpio_key
- Add Lenovo Yoga Book lid switch
- Fix Bluetooth on Lenovo Yoga Book
- Add Nextbook Ares 8A data
- Remove unnecessary invalid_aei_gpiochip settings
- Add ALS sensor support for Yoga Tablet 2 1050/830 series
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmSdSpoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xd8gf/eJ9BFzUfA8otMPcjEHZWOr6TkL3u
P0C3ITatLhLk4Y5BkQ3iQlelJlcEflYF8VDT9Xfrm086aJLI57Dv5NWvyzsVBb20
CD+5ojdASAsgeoNYO4dIEB7G8gIibvGeH7xGb+oZBl8xaVLWbBHfl4pXPSi/iGzn
33aB5yaL0v0Uveb2kQrMmQ1P4APKNCvYuoi6u6zUmansLFWpQ3NbdME/bCyqW+qx
fTNfjjuNcRBlbK4Pvf5x9tT8xzPFz0YATOe/TTyL4K490aShEnXHBio2F9FAuzib
7FeStlhUGzQuF2LabgLiBw16j/Kr5XR37eukSwY8jVvZCQCqvTRBfbgM2g==
=H1S7
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc improvements
Dell-DDV: Add documentation
INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
Lenovo Yogabook:
- Refactor / rework to also support Android models
Think-LMI:
- Multiple improvements and fixes
WMI:
- Add proper API documentation for the WMI bus
x86-android-tablets:
- Misc new hw support
Miscellaneous other cleanups / fixes"
* tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits)
platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps
platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps
platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC
platform/x86:intel/pmc: Discover PMC devices
platform/x86:intel/pmc: Enable debugfs multiple PMC support
platform/x86:intel/pmc: Add support to handle multiple PMCs
platform/x86:intel/pmc: Combine core_init() and core_configure()
platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms
platform/x86/intel: tpmi: Remove hardcoded unit and offset
platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match
platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value
platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name
platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors
platform/x86: int3472: discrete: Remove sensor_config-s
platform/x86: int3472: discrete: Drop GPIO remapping support
platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32
platform/x86/dell/dell-rbtn: Fix resources leaking on error path
platform/x86: ISST: Fix usage counter
platform/x86: ISST: Reset default callback on unregister
platform/x86: int3472: Switch back to use struct i2c_driver's .probe()
...
|
||
|
Linus Torvalds
|
ca7ce08d6a |
SCSI misc on 20230629
Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx). We have a couple of major core changes impacting
other systems: Command Duration Limits, which spills into block and
ATA and block level Persistent Reservation Operations, which touches
block, nvme, target and dm (both of which are added with merge commits
containing a cover letter explaining what's going on).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZJ19cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfZpAQCQBuWR
ELcOhsaG5KzO6xLWcH8mjsOoxffKvazZjTKXlAD5ATEv7++E250oKS3t+yfjae5I
Lc195MlDju85ItUQgfk=
=U9ik
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
||
|
Linus Torvalds
|
3a8a670eee |
Networking changes for 6.5.
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
||
|
Dan Williams
|
867eab655d |
Merge branch 'for-6.5/cxl-fwupd' into for-6.5/cxl
Add the first typical (non-sanitization) consumer of the new background command infrastructure, firmware update. Given both firmware-update and sanitization were developed in parallel from the common background-command baseline, resolve some minor context conflicts. |
||
|
Vishal Verma
|
9521875bbe |
cxl: add a firmware update mechanism using the sysfs firmware loader
The sysfs based firmware loader mechanism was created to easily allow userspace to upload firmware images to FPGA cards. This also happens to be pretty suitable to create a user-initiated but kernel-controlled firmware update mechanism for CXL devices, using the CXL specified mailbox commands. Since firmware update commands can be long-running, and can be processed in the background by the endpoint device, it is desirable to have the ability to chunk the firmware transfer down to smaller pieces, so that one operation does not monopolize the mailbox, locking out any other long running background commands entirely - e.g. security commands like 'sanitize' or poison scanning operations. The firmware loader mechanism allows a natural way to perform this chunking, as after each mailbox command, that is restricted to the maximum mailbox payload size, the cxl memdev driver relinquishes control back to the fw_loader system and awaits the next chunk of data to transfer. This opens opportunities for other background commands to access the mailbox and send their own slices of background commands. Add the necessary helpers and state tracking to be able to perform the 'Get FW Info', 'Transfer FW', and 'Activate FW' mailbox commands as described in the CXL spec. Wire these up to the firmware loader callbacks, and register with that system to create the memX/firmware/ sysfs ABI. Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20230602-vv-fw_update-v4-1-c6265bd7343b@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Davidlohr Bueso
|
180ffd338c |
cxl/mem: Support Secure Erase
Implement support for the non-pmem exclusive secure erase, per CXL specs. Create a write-only 'security/erase' sysfs file to perform the requested operation. As with the sanitation this requires the device being offline and thus no active HPA-DPA decoding. The expectation is that userspace can use it such as: cxl disable-memdev memX echo 1 > /sys/bus/cxl/devices/memX/security/erase cxl enable-memdev memX Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://lore.kernel.org/r/20230612181038.14421-7-dave@stgolabs.net Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Davidlohr Bueso
|
48dcdbb16e |
cxl/mem: Wire up Sanitization support
Implement support for CXL 3.0 8.2.9.8.5.1 Sanitize. This is done by
adding a security/sanitize' memdev sysfs file to trigger the operation
and extend the status file to make it poll(2)-capable for completion.
Unlike all other background commands, this is the only operation that
is special and monopolizes the device for long periods of time.
In addition to the traditional pmem security requirements, all regions
must also be offline in order to perform the operation. This permits
avoiding explicit global CPU cache management, relying instead on the
implict cache management when a region transitions between
CXL_CONFIG_ACTIVE and CXL_CONFIG_COMMIT.
The expectation is that userspace can use it such as:
cxl disable-memdev memX
echo 1 > /sys/bus/cxl/devices/memX/security/sanitize
cxl wait-sanitize memX
cxl enable-memdev memX
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230612181038.14421-5-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|