The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes: cd198cadde ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
- Fix build breakage due to bogus MAX_ORDER definitions on !4k pages
- Avoid masking fault address for perf software events
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmSCO80QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFvXB/0aRpgYaYwyHc5+vO7iqb1qdiuLoxqXRpPT
HywWo6yajrhIQ4OaV1HED4jY1jCNyzpSWMMJGgDfQNgJf5R0hr7A+QPaoKOLqlOa
NN5FN84CcoiDxFszbolvn3UdXN+RA/P7buAZNv2ub7B7GpV9jnIkVkSviHlLlUUx
OgrnTvR7FlyBVK2p5WMPh6ZUsfi2K9lNkGQHQBpE7jRPJbqcBmkgHqgsA+76NupQ
5UE/3DxOuu4UEo1LAFam63P1pn62CGEv1ZXzQYJ4PrYjZ41HCYpiCFX9iuzAo6JA
FwhVy+X1pkE8UrOASKz7NdOZssV5oHjuZ/BKdE9txyzHOOCcdGOQ
=QIKK
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two tiny arm64 fixes for -rc6.
One fixes a build breakage when MAX_ORDER can be nonsensical if
CONFIG_EXPERT=y and the other fixes the address masking for perf's
page fault software events so that it is consistent amongst them:
- Fix build breakage due to bogus MAX_ORDER definitions on !4k pages
- Avoid masking fault address for perf software events"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block
arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt
We can race where we have added work to the work_list, but
vhost_task_fn has passed that check but not yet set us into
TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and
just return.
This bug was intoduced in commit f9010dbdce ("fork, vhost: Use
CLONE_THREAD to fix freezer/ps regression") when I moved the setting
of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from
logging warnings about being in the wrong state. This moves the setting
of TASK_INTERRUPTIBLE back to before we test if we need to stop the
task to avoid a possible race there as well. We then have vhost_worker
set TASK_RUNNING if it finds work similar to before.
Fixes: f9010dbdce ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230607192338.6041-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we
can race where:
1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue
2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create.
3. vhost_worker_create will set the dev->worker pointer before setting
the worker->vtsk pointer.
4. thread0's vhost_work_queue will see the dev->worker pointer is
set and try to call vhost_task_wake using not yet set worker->vtsk
pointer.
5. We then crash since vtsk is NULL.
Before commit 6e890c5d50 ("vhost: use vhost_tasks for worker
threads"), we only had the worker pointer so we could just check it to
see if VHOST_SET_OWNER has been done. After that commit we have the
vhost_worker and vhost_task pointer, so we can now hit the bug above.
This patch embeds the vhost_worker in the vhost_dev and moves the work
list initialization back to vhost_dev_init, so we can just check the
worker.vtsk pointer to check if VHOST_SET_OWNER has been done like
before.
Fixes: 6e890c5d50 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230607192338.6041-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Jason Wang <jasowang@redhat.com>
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ignore executables for ringtest.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_C121802C93CB4095C6D7D95113442E830A07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the MAINTAINERS entries for the Renesas RZ/V2M I2C driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On riscv qemu platform, when add kprobe event on do_sys_open() to show
filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3
mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE,
the +0($arg2) addr is processed as a kernel address though it is a
userspace address, cause the above filename=(fault) print. So select
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the
kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/"
flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Fixes: 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This update contains:
- Propagate unlinked inode list corruption back up to log recovery (regression
fix).
- improve corruption detection for AGFL entries, AGFL indexes and XEFI extents
(syzkaller fuzzer oops report).
- Avoid double perag reference release (regression fix).
- Improve extent merging detection in scrub (regression fix).
- Fix a new undefined high bit shift (regression fix).
- Fix for AGF vs inode cluster buffer deadlock (regression fix).
-----BEGIN PGP SIGNATURE-----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=vT74
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Dave Chinner:
"These are a set of regression fixes discovered on recent kernels. I
was hoping to send this to you a week and half ago, but events out of
my control delayed finalising the changes until early this week.
Whilst the diffstat looks large for this stage of the merge window, a
large chunk of it comes from moving the guts of one function from one
file to another i.e. it's the same code, it is just run in a different
context where it is safe to hold a specific lock. Otherwise the
individual changes are relatively small and straigtht forward.
Summary:
- Propagate unlinked inode list corruption back up to log recovery
(regression fix)
- improve corruption detection for AGFL entries, AGFL indexes and
XEFI extents (syzkaller fuzzer oops report)
- Avoid double perag reference release (regression fix)
- Improve extent merging detection in scrub (regression fix)
- Fix a new undefined high bit shift (regression fix)
- Fix for AGF vs inode cluster buffer deadlock (regression fix)"
* tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: collect errors from inodegc for unlinked inode recovery
xfs: validate block number being freed before adding to xefi
xfs: validity check agbnos on the AGFL
xfs: fix agf/agfl verification on v4 filesystems
xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
xfs: fix broken logic when detecting mergeable bmap records
xfs: Fix undefined behavior of shift into sign bit
xfs: fix AGF vs inode cluster buffer deadlock
xfs: defered work could create precommits
xfs: restore allocation trylock iteration
xfs: buffer pins need to hold a buffer reference
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[BUG]
After the recent scrub rework introduced in commit e02ee89baa ("btrfs:
scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"),
btrfs scrub no longer reports repaired errors any more:
# mkfs.btrfs -f $dev -d DUP
# mount $dev $mnt
# xfs_io -f -d -c "pwrite -b 64K -S 0xaa 0 64" $mnt/file
# umount $dev
# xfs_io -f -c "pwrite -S 0xff $phy1 64K" $dev # Corrupt the first mirror
# mount $dev $mnt
# btrfs scrub start -BR $mnt
scrub done for 725e7cb7-8a4a-4c77-9f2a-86943619e218
Scrub started: Tue Jun 6 14:56:50 2023
Status: finished
Duration: 0:00:00
data_extents_scrubbed: 2
tree_extents_scrubbed: 18
data_bytes_scrubbed: 131072
tree_bytes_scrubbed: 294912
read_errors: 0
csum_errors: 0 <<< No errors here
verify_errors: 0
[...]
uncorrectable_errors: 0
unverified_errors: 0
corrected_errors: 16 <<< Only corrected errors
last_physical: 2723151872
This can confuse btrfs-progs, as it relies on the csum_errors to
determine if there is anything wrong.
While on v6.3.x kernels, the report is different:
csum_errors: 16 <<<
verify_errors: 0
[...]
uncorrectable_errors: 0
unverified_errors: 0
corrected_errors: 16 <<<
[CAUSE]
In the reworked scrub, we update the scrub progress inside
scrub_stripe_report_errors(), using various bitmaps to update the
result.
For example for csum_errors, we use bitmap_weight() of
stripe->csum_error_bitmap.
Unfortunately at that stage, all error bitmaps (except
init_error_bitmap) are the result of the latest repair attempt, thus if
the stripe is fully repaired, those error bitmaps will all be empty,
resulting the above output mismatch.
To fix this, record the number of errors into stripe->init_nr_*_errors.
Since we don't really care about where those errors are, we only need to
record the number of errors.
Then in scrub_stripe_report_errors(), use those initial numbers to
update the progress other than using the latest error bitmaps.
Fixes: e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With recent scrub rework, the scrub operation no longer respects the
read-only flag passed by "-r" option of "btrfs scrub start" command.
# mkfs.btrfs -f -d raid1 $dev1 $dev2
# mount $dev1 $mnt
# xfs_io -f -d -c "pwrite -b 128K -S 0xaa 0 128k" $mnt/file
# sync
# xfs_io -c "pwrite -S 0xff $phy1 64k" $dev1
# xfs_io -c "pwrite -S 0xff $((phy2 + 65536)) 64k" $dev2
# mount $dev1 $mnt -o ro
# btrfs scrub start -BrRd $mnt
Scrub device $dev1 (id 1) done
Scrub started: Tue Jun 6 09:59:14 2023
Status: finished
Duration: 0:00:00
[...]
corrected_errors: 16 <<< Still has corrupted sectors
last_physical: 1372585984
Scrub device $dev2 (id 2) done
Scrub started: Tue Jun 6 09:59:14 2023
Status: finished
Duration: 0:00:00
[...]
corrected_errors: 16 <<< Still has corrupted sectors
last_physical: 1351614464
# btrfs scrub start -BrRd $mnt
Scrub device $dev1 (id 1) done
Scrub started: Tue Jun 6 10:00:17 2023
Status: finished
Duration: 0:00:00
[...]
corrected_errors: 0 <<< No more errors
last_physical: 1372585984
Scrub device $dev2 (id 2) done
[...]
corrected_errors: 0 <<< No more errors
last_physical: 1372585984
[CAUSE]
In the newly reworked scrub code, repair is always submitted no matter
if we're doing a read-only scrub.
[FIX]
Fix it by skipping the write submission if the scrub is a read-only one.
Unfortunately for the report part, even for a read-only scrub we will
still report it as corrected errors, as we know it's repairable, even we
won't really submit the write.
Fixes: e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current path that skips allocating the slave runtime does not clear
the alloc_slave_rt flag, this is clearly incorrect. Add the missing
clear, so the runtime won't be erroneously cleaned up.
Fixes: f3016b891c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset has the following fixes for bnxt_en:
1. Add missing VNIC ID parameter in the FW message when getting an
updated RSS configuration from the FW.
2. Fix a warning when doing ethtool reset on newer chips.
3. Fix VLAN issue on a VF when a default VLAN is assigned.
4. Fix a problem during DPC (Downstream Port containment) scenario.
5. Fix a NULL pointer dereference when receiving a PTP event from FW.
6. Fix VXLAN/Geneve UDP port delete/add with newer FW.
====================
Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As per the new udp tunnel framework, drivers which need to know the
details of a port entry (i.e. port type) when it gets deleted should
use the .set_port / .unset_port callbacks.
Implementing the current .udp_tunnel_sync callback would mean that the
deleted tunnel port entry would be all zeros. This used to work on
older firmware because it would not check the input when deleting a
tunnel port. With newer firmware, the delete will now fail and
subsequent tunnel port allocation will fail as a result.
Fixes: 442a35a5a7 ("bnxt: convert to new udp_tunnel_nic infra")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The firmware can send PHC_RTC_UPDATE async event on a PF that may not
have PTP registered. In such a case, there will be a null pointer
deference for bp->ptp_cfg when we try to handle the event.
Fix it by not registering for this event with the firmware if !bp->ptp_cfg.
Also, check that bp->ptp_cfg is valid before proceeding when we receive
the event.
Fixes: 8bcf6f04d4 ("bnxt_en: Handle async event when the PHC is updated in RTC mode")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Driver starts firmware fatal error recovery by detecting
heartbeat failure or fw reset count register changing. But
these checks are not reliable if the device is not accessible.
This can happen while DPC (Downstream Port containment) is in
progress. Skip firmware fatal recovery if pci_device_is_present()
returns false.
Fixes: acfb50e4e7 ("bnxt_en: Add FW fatal devlink_health_reporter.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default
VLAN that may be setup by the PF. If a default VLAN is enabled,
the VF cannot support VLAN acceleration on the receive side and
the VNIC must be setup to strip out the default VLAN tag. If a
default VLAN is not enabled, the VF can support VLAN acceleration
on the receive side. The VNIC should be set up to strip or not
strip the VLAN based on the RX VLAN acceleration setting.
Without this call to determine the default VLAN before calling
bnxt_setup_vnic(), the VNIC may not be set up correctly. For
example, bnxt_setup_vnic() may set up to strip the VLAN tag based
on stale default VLAN information. If RX VLAN acceleration is
not enabled, the VLAN tag will be incorrectly stripped and the
RX data path will not work correctly.
Fixes: cf6645f8eb ("bnxt_en: Add function for VF driver to query default VLAN.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Only older NIC controller's firmware uses the PROC AP reset type.
Firmware on 5731X/5741X and newer chips does not support this reset
type. When bnxt_reset() issues a series of resets, this PROC AP
reset may actually fail on these newer chips because the firmware
is not ready to accept this unsupported command yet. Avoid this
unnecessary error by skipping this reset type on chips that don't
support it.
Fixes: 7a13240e37 ("bnxt_en: fix ethtool_reset_flags ABI violations")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We must specify the vnic id of the vnic in the input structure of this
firmware message. Otherwise we will get an error from the firmware.
Fixes: 98a4322b70 ("bnxt_en: update RSS config using difference algorithm")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.
../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration
540 | struct regmap_config *regmap_config)
../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client':
../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c: In function 'at24_probe':
../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable]
Fixes: 5c01525847 ("eeprom: at24: add basic regmap_i2c support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is a race between capsnaps flush and removing the inode from
'mdsc->snap_flush_list' list:
== Thread A == == Thread B ==
ceph_queue_cap_snap()
-> allocate 'capsnapA'
->ihold('&ci->vfs_inode')
->add 'capsnapA' to 'ci->i_cap_snaps'
->add 'ci' to 'mdsc->snap_flush_list'
...
== Thread C ==
ceph_flush_snaps()
->__ceph_flush_snaps()
->__send_flush_snap()
handle_cap_flushsnap_ack()
->iput('&ci->vfs_inode')
this also will release 'ci'
...
== Thread D ==
ceph_handle_snap()
->flush_snaps()
->iterate 'mdsc->snap_flush_list'
->get the stale 'ci'
->remove 'ci' from ->ihold(&ci->vfs_inode) this
'mdsc->snap_flush_list' will WARNING
To fix this we will increase the inode's i_count ref when adding 'ci'
to the 'mdsc->snap_flush_list' list.
[ idryomov: need_put int -> bool ]
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Wait for AON bit in HOST_SS_CPR_RST_CLR to return 0 before
starting VPUIP power up sequence, otherwise the VPU device
may sporadically fail to boot.
An error in power up sequence is propagated to the runtime
power management - the device will be in an error state
until the VPU driver is reloaded.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607094502.388489-1-stanislaw.gruszka@linux.intel.com
If we get signal when waiting for the mmu->lock we do not invalidate
current MMU configuration that might result in undefined behavior.
Additionally there is little or no benefit on break waiting for
ipc->lock. In current code base, we keep this lock for short periods.
Fixes: 263b2ba5fc ("accel/ivpu: Add Intel VPU MMU support")
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-2-stanislaw.gruszka@linux.intel.com
Turning off the PLL and entering D0i3 will reset the VPU so
an explicit IP reset is redundant.
But if the VPU is active, it may interfere with PLL disabling
and to avoid that, we have to issue an additional IP reset
to silence the VPU before turning off the PLL.
Fixes: a8fed6d1e0 ("accel/ivpu: Fix power down sequence")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-1-stanislaw.gruszka@linux.intel.com
- fix a broken sync while rescheduling delayed work, by
Vladislav Efanov
-----BEGIN PGP SIGNATURE-----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=euFF
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix a broken sync while rescheduling delayed work,
by Vladislav Efanov
* tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge:
batman-adv: Broken sync while rescheduling delayed work
====================
Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had a number of short comings:
- EEE must be re-evaluated whenever the state machine detects a link
change as wight be switching from a link partner with EEE
enabled/disabled
- tx_lpi_enabled controls whether EEE should be enabled/disabled for the
transmit path, which applies to the TBUF block
- We do not need to forcibly enable EEE upon system resume, as the PHY
state machine will trigger a link event that will do that, too
Fixes: 6ef398ea60 ("net: bcmgenet: add EEE support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flip the netif_carrier_ok() condition in queue wake logic.
When I moved it to inside __netif_txq_completed_wake()
I missed negating it.
This made the condition ineffective and could probably
lead to crashes.
Fixes: 301f227fc8 ("net: piggy back on the memory barrier in bql when waking queues")
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The down condition should be the negation of the wake condition,
IOW when I moved it from:
if (cond && wake())
to
if (__netif_txq_completed_wake(cond))
Cond should have been negated. Flip it now.
This bug leads to occasional crashes with netconsole.
It may also lead to queue never waking up in case BQL is not enabled.
Reported-by: David Wei <davidhwei@meta.com>
Fixes: 08a096780d ("bnxt: use new queue try_stop/try_wake macros")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZIDxUwAKCRDbK58LschI
g5hDAQD7ukrniCvMRNIm2yUZIGSxE4RvGiXptO4a0NfLck5R/wEAsfN2KUsPcPhW
HS37lVfx7VVXfj42+REf7lWLu4TXpwk=
=6mS/
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-07
We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).
The main changes are:
1) Fix a use-after-free in BPF's task local storage, from KP Singh.
2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.
3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.
4) UAPI fix for BPF_NETFILTER before final kernel ships,
from Florian Westphal.
5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
not being set for inner maps, from Rhys Rustad-Elliott.
6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add extra path pointer check to d_path helper
selftests/bpf: Fix sockopt_sk selftest
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
selftests/bpf: Add access_inner_map selftest
bpf: Fix elem_size not being set for inner maps
bpf: Fix UAF in task local storage
bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================
Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.
Fixes: 4e0473f106 ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The link object of mgr->reserved_pages is the blocks
variable in struct amdgpu_vram_reservation, not the
link variable in struct drm_buddy_block.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
According to Alex, most APUs from that time seem to have the same issue
(vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I
limit the fixup to CHIP_STONEY
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
