Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_AUX_BUS to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-9-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
DRM_DW_HDMI has a number of dependencies that might not be enabled.
However, drivers were used to selecting it while not enforcing the
DRM_DW_HDMI dependencies.
This could result in Kconfig warnings (and further build breakages) such
as:
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DRM_DW_HDMI
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && DRM_DISPLAY_HELPER [=n]
Selected by [m]:
- DRM_SUN8I_DW_HDMI [=m] && HAS_IOMEM [=y] && DRM_SUN4I [=m]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403262127.kZkttfNz-lkp@intel.com/
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-7-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS.
Since the number of users is limited and it's a selected symbol, we can
easily rename it to make it consistent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-1-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
If a specific design doesn't wire IT66121's interrupt signal output pin up
to the display controller side, then we should not register the interrupt
handler. Such a decision is valid usage, as we can fall back to polling
mode. So, don't make the assumption that a specific board always supports
HPD. Carry out a sanity check on 'client->irq' before using it, fall back
to polling mode if client->irq < 0 is true. Such a design increases the
overall flexibility.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240316160536.1051513-1-sui.jingfeng@linux.dev
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240316160536.1051513-1-sui.jingfeng@linux.dev
Moved IRQ registration down to end of adv7511_probe().
If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:
Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
Call trace:
cec_received_msg_ts+0x48/0x990 [cec]
adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
adv7511_irq_process+0xd8/0x120 [adv7511]
adv7511_irq_handler+0x1c/0x30 [adv7511]
irq_thread_fn+0x30/0xa0
irq_thread+0x14c/0x238
kthread+0x190/0x1a8
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219-adv7511-cec-irq-crash-fix-v2-1-245e53c4b96f@bang-olufsen.dk
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f857bb36a78c57dc6a07b7b6cc90312fc3139ca8.1706038510.git.jani.nikula@intel.com
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ae1fd3d94829e3e5c197ca58eb18108cb004cf0b.1706038510.git.jani.nikula@intel.com
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b784ed15b792bb87f8c40b90c5c42591d7878643.1706038510.git.jani.nikula@intel.com
Prefer using the struct drm_edid based functions.
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/98f0356f1bd279bc337c904d8313c9afee530b48.1706038510.git.jani.nikula@intel.com
Prefer using the struct drm_edid based functions.
cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/32c9b52fe6fa7cbad6bfd0ff00041876977e02ea.1706038510.git.jani.nikula@intel.com
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/51691a606671d46696c0f1ab9492e6a1b691457b.1706038510.git.jani.nikula@intel.com
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also
fixes a build problem with xe.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-11-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-11-aford173@gmail.com
This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-9-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-9-aford173@gmail.com
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.
The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit 20c827683d ("drm: bridge:
samsung-dsim: Fix init during host transfer") and 0c14d31306 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.
This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.
Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.
Fixes: 20c827683d ("drm: bridge: samsung-dsim: Fix init during host transfer")
Fixes: 0c14d31306 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org
The driver never unregisters the audio codec platform device, which can
lead to a crash on module reloading, nor does it handle the return value
from sii902x_audio_codec_init().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: ff5781634c ("drm/bridge: sii902x: Implement HDMI audio support")
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-2-b9fd3e448411@ideasonboard.com
A null pointer dereference crash has been observed rarely on TI
platforms using sii9022 bridge:
[ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x]
[ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x]
[ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm]
[ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper]
[ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper]
[ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm]
[ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper]
[ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper]
[ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper]
[ 53.326401] drm_client_register+0x5c/0xa0 [drm]
[ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper]
[ 53.336881] tidss_probe+0x128/0x264 [tidss]
[ 53.341174] platform_probe+0x68/0xc4
[ 53.344841] really_probe+0x188/0x3c4
[ 53.348501] __driver_probe_device+0x7c/0x16c
[ 53.352854] driver_probe_device+0x3c/0x10c
[ 53.357033] __device_attach_driver+0xbc/0x158
[ 53.361472] bus_for_each_drv+0x88/0xe8
[ 53.365303] __device_attach+0xa0/0x1b4
[ 53.369135] device_initial_probe+0x14/0x20
[ 53.373314] bus_probe_device+0xb0/0xb4
[ 53.377145] deferred_probe_work_func+0xcc/0x124
[ 53.381757] process_one_work+0x1f0/0x518
[ 53.385770] worker_thread+0x1e8/0x3dc
[ 53.389519] kthread+0x11c/0x120
[ 53.392750] ret_from_fork+0x10/0x20
The issue here is as follows:
- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
platform_device_register_data()
- The registration of the audio platform device causes probing of the
deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
However, the sii902x driver has not set up the i2c part yet, leading
to the crash.
Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 21d808405f ("drm/bridge/sii902x: Fix EDID readback")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonboard.com
According to new configuration spreadsheet from Toshiba for TC9595,
the Pixel PLL input clock have to be in range 6..40 MHz. The sheet
calculates those PLL input clock as reference clock divided by both
pre-dividers. Add the extra limit.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118220243.203655-1-marex@denx.de
Similar to commit 26db46bc9c ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.
Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().
Fixes: 3203e497eb ("drm/bridge: anx7625: Synchronously run runtime suspend.")
Fixes: adca62ec37 ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118015916.2296741-1-hsinyi@chromium.org
