This pull request provides nolibc updates, most notably greatly improved
testing. These tests are located in tools/testing/selftests/nolibc. The
output of "make help" is as follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed.
$
-----BEGIN PGP SIGNATURE-----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=wqBE
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
"Most notably greatly improved testing. These tests are located in
tools/testing/selftests/nolibc. The output of "make help" is as
follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed."
* tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Avoid generated files being committed
selftests/nolibc: add a "help" target
selftests/nolibc: "sysroot" target installs a local copy of the sysroot
selftests/nolibc: add a "run" target to start the kernel in QEMU
selftests/nolibc: add a "defconfig" target
selftests/nolibc: add a "kernel" target to build the kernel with the initramfs
selftests/nolibc: support glibc as well
selftests/nolibc: condition some tests on /proc existence
selftests/nolibc: recreate and populate /dev and /proc if missing
selftests/nolibc: on x86, support exiting with isa-debug-exit
selftests/nolibc: exit with poweroff on success when getpid() == 1
selftests/nolibc: add a few tests for some libc functions
selftests/nolibc: implement a few tests for various syscalls
selftests/nolibc: support a test definition format
selftests/nolibc: add basic infrastructure to ease creation of nolibc tests
tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
tools/nolibc: make argc 32-bit in riscv startup code
After the previous patches, the MPTCP protocol can generate
fast-closes on both ends of the connection. Rework the relevant
test-case to carefully trigger the fast-close code-path on a
single end at the time, while ensuring than a predictable amount
of data is spooled on both ends.
Additionally add another test-cases for the passive socket
fast-close.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Refactor selftests to use an array of structs in xfrm_fill_key().
From Gautam Menghani.
2) Drop an unused argument from xfrm_policy_match.
From Hongbin Wang.
3) Support collect metadata mode for xfrm interfaces.
From Eyal Birger.
4) Add netlink extack support to xfrm.
From Sabrina Dubroca.
Please note, there is a merge conflict in:
include/net/dst_metadata.h
between commit:
0a28bfd497 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
from the net-next tree and commit:
5182a5d48c ("net: allow storing xfrm interface metadata in metadata_dst")
from the ipsec-next tree.
Can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* kvm-arm64/misc-6.1:
: .
: Misc KVM/arm64 fixes and improvement for v6.1
:
: - Simplify the affinity check when moving a GICv3 collection
:
: - Tone down the shouting when kvm-arm.mode=protected is passed
: to a guest
:
: - Fix various comments
:
: - Advertise the new kvmarm@lists.linux.dev and deprecate the
: old Columbia list
: .
KVM: arm64: Advertise new kvmarm mailing list
KVM: arm64: Fix comment typo in nvhe/switch.c
KVM: selftests: Update top-of-file comment in psci_test
KVM: arm64: Ignore kvm-arm.mode if !is_hyp_mode_available()
KVM: arm64: vgic: Remove duplicate check in update_affinity_collection()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/dirty-log-ordered:
: .
: Retrofit some ordering into the existing API dirty-ring by:
:
: - relying on acquire/release semantics which are the default on x86,
: but need to be explicit on arm64
:
: - adding a new capability that indicate which flavor is supported, either
: with explicit ordering (arm64) or both implicit and explicit (x86),
: as suggested by Paolo at KVM Forum
:
: - documenting the requirements for this new capability on weakly ordered
: architectures
:
: - updating the selftests to do the right thing
: .
KVM: selftests: dirty-log: Use KVM_CAP_DIRTY_LOG_RING_ACQ_REL if available
KVM: selftests: dirty-log: Upgrade flag accesses to acquire/release semantics
KVM: Document weakly ordered architecture requirements for dirty ring
KVM: x86: Select CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL
KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option
KVM: Use acquire/release semantics when accessing dirty ring GFN state
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since three patchsets "add tc-testing test cases", "refactor duplicate
codes in the tc cls walk function", and "refactor duplicate codes in the
qdisc class walk function" are merged to net-next tree, the list of
supported features needs to be updated in config file.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220929041909.83913-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Skip tests that require EPT when it is not available
* Do not hang when a test fails with an empty stack trace
* avoid spurious failure when running access_tracking_perf_test in a KVM guest
* work around GCC's tendency to optimize loops into mem*() functions, which
breaks because the guest code in selftests cannot call into PLTs
* fix -Warray-bounds error in fix_hypercall_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmM2x0MUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMLBggAmQpzSTuUq8Vn4fbXg8NpxofzZVzo
hWagwlm29Ac7jfoSa4lOX4nbkyb5CjEL1O2qSd1/lJuZndMxQhmLe3Bnzu2Mzqp0
7WFXr0lAiOeH4hw8NE9Kx4x/vJ8nev4gsOlWNh7rr1RlP3vgHTtyYN/J7UoNnvTl
fcbD1Bi/A+2RnzMQ6cHms8lqsAfts/OZIMTCUf0TW2EhLmrN5CLwQkRNNh1Ql8gX
/ZvLs6C/FEkgok6Wfc6mMrIY+Wlu7en6/pHAjeORAoieGC2CYh0Od3ETzpe7Qx+L
L/W3BiOYlvQBqEQmgzd6bpVNDlqhn0GGczY5rkB54Es7jfxUjLU2myqw+g==
=bb0j
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A small fix to the reported set of supported CPUID bits, and selftests
fixes:
- Skip tests that require EPT when it is not available
- Do not hang when a test fails with an empty stack trace
- avoid spurious failure when running access_tracking_perf_test in a
KVM guest
- work around GCC's tendency to optimize loops into mem*() functions,
which breaks because the guest code in selftests cannot call into
PLTs
- fix -Warray-bounds error in fix_hypercall_test"
* tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Compare insn opcodes directly in fix_hypercall_test
KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use
KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
KVM: selftests: Gracefully handle empty stack traces
KVM: selftests: replace assertion with warning in access_tracking_perf_test
KVM: selftests: Skip tests that require EPT when it is not available
Fix a double free at exit of the test suite.
Fixes: a693ff3ed5 ("selftests/xsk: Add support for executing tests on physical device")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20220929090133.7869-1-magnus.karlsson@gmail.com
There are a couple of spelling mistakes, one in a literal string and one
in a comment. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220928221555.67873-1-colin.i.king@gmail.com
Context:
1. all_tests_uml.config used to be UML specific back when users to
manually specify CONFIG_VIRTIO_UML=y to enable CONFIG_PCI=y.
2. --alltests used allyesconfig along with a curated list of options to
disable. It's only ever worked for brief periods of time and has
perennially been broken due to compile issues.
Now all_tests_uml.config should work across ~all architectures.
Let's instead use this to implement --alltests.
Note: if anyone was using all_tests_uml.config, this change breaks them.
I think that's unlikely since it was added in 5.19 and was a lot to
type: --kunitconfig=tools/testing/kunit/configs/all_tests_uml.config.
We could make it a symlink to the new name, but I don't think the
caution is warranted here.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 6fc3a8636a ("kunit: tool: Enable virtio/PCI by default on UML")
made it so we enable these options by default for UML.
Specifying them here is now redundant.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch adds the kunit.enable module parameter that will need to be
set to true in addition to KUNIT being enabled for KUnit tests to run.
The default value is true giving backwards compatibility. However, for
the production+testing use case the new config option
KUNIT_DEFAULT_ENABLED can be set to N requiring the tester to opt-in
by passing kunit.enable=1 to the kernel.
Signed-off-by: Joe Fradley <joefradley@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With
$ kunit.py run --raw_output=all ...
you get the raw output from the kernel, e.g. something like
> TAP version 14
> 1..26
> # Subtest: time_test_cases
> 1..1
> ok 1 - time64_to_tm_test_date_range
> ok 1 - time_test_cases
But --raw_output=kunit or equivalently --raw_output, you get
> TAP version 14
> 1..26
> # Subtest: time_test_cases
> 1..1
> ok 1 - time64_to_tm_test_date_range
> ok 1 - time_test_cases
It looks less readable in my opinion, and it also isn't "raw output."
This is due to sharing code with kunit_parser.py, which wants to strip
leading whitespace since it uses anchored regexes.
We could update the kunit_parser.py code to tolerate leaading spaces,
but this patch takes the easier way out and adds a bool flag.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Map the test's huge page region with 2MiB virtual mappings when TDP is
disabled so that KVM can shadow the region with huge pages. This fixes
nx_huge_pages_test on hosts where TDP hardware support is disabled.
Purposely do not skip this test on TDP-disabled hosts. While we don't
care about NX Huge Pages on TDP-disabled hosts from a security
perspective, KVM does support it, and so we should test it.
For TDP-enabled hosts, continue mapping the region with 4KiB pages to
ensure that KVM can map it with huge pages irrespective of the guest
mappings.
Fixes: 8448ec5993 ("KVM: selftests: Add NX huge pages test")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220929181207.2281449-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helper functions for reading the value of kvm_intel and kvm_amd
boolean module parameters. Use the kvm_intel variant in
vm_is_unrestricted_guest() to simplify the check for
kvm_intel.unrestricted_guest.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220929181207.2281449-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add __builtin_unreachable() to TEST_FAIL() so that the compiler knows
that any code after a TEST_FAIL() is unreachable.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220929181207.2281449-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert back to using memset() in generic_svm_setup() now that KVM
selftests override memset() and friends specifically to prevent the
compiler from generating fancy code and/or linking to the libc
implementation.
This reverts commit ed290e1c20.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220928233652.783504-8-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Combine fix_hypercall_test's two subtests into a common routine, the only
difference between the two is whether or not the quirk is disabled.
Passing a boolean is a little gross, but using an enum to make it super
obvious that the callers are enabling/disabling the quirk seems like
overkill.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220928233652.783504-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly verify that KVM doesn't patch in the native hypercall if the
FIX_HYPERCALL_INSN quirk is disabled. The test currently verifies that
a #UD occurred, but doesn't actually verify that no patching occurred.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220928233652.783504-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hardcode the VMCALL/VMMCALL opcodes in dedicated arrays instead of
extracting the opcodes from inline asm, and patch in the "other" opcode
so as to preserve the original opcode, i.e. the opcode that the test
executes in the guest.
Preserving the original opcode (by not patching the source), will make
it easier to implement a check that KVM doesn't modify the opcode (the
test currently only verifies that a #UD occurred).
Use INT3 (0xcc) as the placeholder so that the guest will likely die a
horrible death if the test's patching goes awry.
As a bonus, patching from within the test dedups a decent chunk of code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220928233652.783504-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use input constraints to load RAX and RBX when testing that KVM correctly
does/doesn't patch the "wrong" hypercall. There's no need to manually
load RAX and RBX, and no reason to clobber them either (KVM is not
supposed to modify anything other than RAX).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220928233652.783504-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Directly compare the expected versus observed hypercall instructions when
verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN
quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with
an "unsigned char" as the source generates an out-of-bounds accesses.
Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but
there's no known reason to copy locally instead of comparing directly.
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
63 | memcpy(&exp, exp_insn, sizeof(exp));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
64 | memcpy(&obs, obs_insn, sizeof(obs));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1
Fixes: 6c2fa8b20d ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN")
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220928233652.783504-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement memcmp(), memcpy(), and memset() to override the compiler's
built-in versions in order to guarantee that the compiler won't generate
out-of-line calls to external functions via the PLT. This allows the
helpers to be safely used in guest code, as KVM selftests don't support
dynamic loading of guest code.
Steal the implementations from the kernel's generic versions, sans the
optimizations in memcmp() for unaligned accesses.
Put the utilities in a separate compilation unit and build with
-ffreestanding to fudge around a gcc "feature" where it will optimize
memset(), memcpy(), etc... by generating a recursive call. I.e. the
compiler optimizes itself into infinite recursion. Alternatively, the
individual functions could be tagged with
optimize("no-tree-loop-distribute-patterns"), but using "optimize" for
anything but debug is discouraged, and Linus NAK'd the use of the flag
in the kernel proper[*].
https://lore.kernel.org/lkml/CAHk-=wik-oXnUpfZ6Hw37uLykc-_P0Apyn2XuX-odh-3Nzop8w@mail.gmail.com
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220928233652.783504-2-seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bail out of test_dump_stack() if the stack trace is empty rather than
invoking addr2line with zero addresses. The problem with the latter is
that addr2line will block waiting for addresses to be passed in via
stdin, e.g. if running a selftest from an interactive terminal.
Opportunistically fix up the comment that mentions skipping 3 frames
since only 2 are skipped in the code.
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220922231724.3560211-1-dmatlack@google.com>
[Small tweak to keep backtrace() call close to if(). - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Page_idle uses {ptep/pmdp}_clear_young_notify which in turn calls
the mmu notifier callback ->clear_young(), which purposefully
does not flush the TLB.
When running the test in a nested guest, point 1. of the test
doc header is violated, because KVM TLB is unbounded by size
and since no flush is forced, KVM does not update the sptes
accessed/idle bits resulting in guest assertion failure.
More precisely, only the first ACCESS_WRITE in run_test() actually
makes visible changes, because sptes are created and the accessed
bit is set to 1 (or idle bit is 0). Then the first mark_memory_idle()
passes since access bit is still one, and sets all pages as idle
(or not accessed). When the next write is performed, the update
is not flushed therefore idle is still 1 and next mark_memory_idle()
fails.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926082923.299554-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* for-next/kselftest: (28 commits)
: Kselftest updates for arm64
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
kselftest/arm64: Fix typo in hwcap check
kselftest/arm64: Add hwcap test for RNG
kselftest/arm64: Add SVE 2 to the tested hwcaps
kselftest/arm64: Add missing newline in hwcap output
kselftest/arm64: Fix spelling misakes of signal names
kselftest/arm64: Enforce actual ABI for SVE syscalls
kselftest/arm64: Correct buffer allocation for SVE Z registers
kselftest/arm64: Include larger SVE and SME VLs in signal tests
kselftest/arm64: Allow larger buffers in get_signal_context()
kselftest/arm64: Preserve any EXTRA_CONTEXT in handle_signal_copyctx()
kselftest/arm64: Validate contents of EXTRA_CONTEXT blocks
kselftest/arm64: Only validate each signal context once
kselftest/arm64: Remove unneeded protype for validate_extra_context()
kselftest/arm64: Fix validation of EXTRA_CONTEXT signal context location
kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
kselftest/arm64: Validate signal ucontext in place
...
Currently we treat any error when reading from the child as a failure and
don't read any more output from that child as a result. This ignores the
fact that it is valid for read() to return EINTR as the error code if there
is a signal pending so we could stop handling the output of children,
especially during exit when we will get some SIGCHLD signals delivered to
us. Fix this by pulling the read handling out into a separate function
which returns a flag if reads should be continued and wrapping it in a
loop.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Once we have started exiting the termination handler will have the same
effect as what we're already running so set the termination flag at that
point.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When fp-stress gets a termination signal it sets a flag telling itself to
exit and sends a termination signal to all the children. If the flag is set
then don't bother repeating this process, it isn't going to accomplish
anything other than consume CPU time which can be an issue when running in
emulation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we set -march=armv8.5+memtag when building the MTE selftests,
allowing the compiler to emit v8.5 and MTE instructions for anything it
generates. This means that we may get code that will generate SIGILLs when
run on older systems rather than skipping on non-MTE systems as should be
the case. Most toolchains don't select any incompatible instructions but
I have seen some reports which suggest that some may be appearing which do
so. This is also potentially problematic in that if the compiler chooses to
emit any MTE instructions for the C code it may interfere with the MTE
usage we are trying to test.
Since the only reason we are specifying this option is to allow us to
assemble MTE instructions in mte_helper.S we can avoid these issues by
moving to using a .arch directive there and adding the -march explicitly to
the toolchain support check instead of the generic CFLAGS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220928154517.173108-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch changes the bpf_dctcp test to ensure the recurred
bpf_setsockopt(TCP_CONGESTION) returns -EBUSY.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
User processes may require many events and when they do the cache
performance of a byte index status check is less ideal than a bit index.
The previous event limit per-page was 4096, the new limit is 32,768.
This change adds a bitwise index to the user_reg struct. Programs check
that the bit at status_bit has a bit set within the status page(s).
Link: https://lkml.kernel.org/r/20220728233309.1896-6-beaub@linux.microsoft.com
Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pick KVM_CAP_DIRTY_LOG_RING_ACQ_REL if exposed by the kernel.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-7-maz@kernel.org
In order to preserve ordering, make sure that the flag accesses
in the dirty log are done using acquire/release accessors.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-6-maz@kernel.org
Test iterators of vma, files and tasks.
Ensure the API works appropriately to visit all tasks,
tasks in a process, or a particular task.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-5-kuifeng@fb.com
Bits 27 through 31 in Hyper-V hypercall 'control' are reserved (see
HV_HYPERCALL_RSVD0_MASK) but '0xdeadbeef' includes them. This causes
KVM to return HV_STATUS_INVALID_HYPERCALL_INPUT instead of the expected
HV_STATUS_INVALID_HYPERCALL_CODE.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/all/87fsgjol20.fsf@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Load RAX with -EFAULT prior to making a Hyper-V hypercall so that tests
can't get false negatives due to the compiler coincidentally loading the
"right" value into RAX, i.e. to ensure that _KVM_ and not the compiler
is correctly clearing RAX on a successful hypercall.
Note, initializing *hv_status (in C code) to -EFAULT is not sufficient
to avoid false negatives, as the compiler can still "clobber" RAX and
thus load garbage into *hv_status if the hypercall faults (or if KVM
doesn't set RAX).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220922062451.2927010-1-vipinsh@google.com
[sean: move to separate patch, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit cc5851c6be ("KVM: selftests: Use exception fixup for #UD/#GP
Hyper-V MSR/hcall tests") introduced a wrong guest assert in guest_hcall().
It is not checking the successful hypercall results and only checks the
result when a fault happens.
GUEST_ASSERT_2(!hcall->ud_expected || res == hcall->expect,
hcall->expect, res);
Correct the assertion by only checking results of the successful
hypercalls.
This issue was observed when this test started failing after building it
in Clang. Above guest assert statement fails because "res" is not equal
to "hcall->expect" when "hcall->ud_expected" is true. "res" gets some
garbage value in Clang from the RAX register. In GCC, RAX is 0 because
it using RAX for @output_address in the asm statement and resetting it
to 0 before using it as output operand in the same asm statement. Clang
is not using RAX for @output_address.
Fixes: cc5851c6be ("KVM: selftests: Use exception fixup for #UD/#GP Hyper-V MSR/hcall tests")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220922062451.2927010-1-vipinsh@google.com
[sean: wrap changelog at ~75 chars, move -EFAULT change to separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix the comment to accurately describe the test and recently added
SYSTEM_SUSPEND test case.
What was once psci_cpu_on_test was renamed and extended to squeeze in a
test case for PSCI SYSTEM_SUSPEND. Nonetheless, the author of those
changes (whoever they may be...) failed to update the file comment to
reflect what had changed.
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220819162100.213854-1-oliver.upton@linux.dev
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. The testcase "bhrb_filter_map_test"
tests the valid and invalid filter maps in different powerpc platforms.
Update this testcase to include scenario to cover multiple branch
filters at sametime. Since powerpc doesn't support multiple filters at
sametime, expect failure during perf_event_open.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921145255.20972-3-atrajeev@linux.vnet.ibm.com
Test 84a0: Create TEQL with default setting
Test 7734: Create TEQL with multiple device
Test 34a9: Delete TEQL with valid handle
Test 6289: Show TEQL stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 6430: Create TBF with default setting
Test 0518: Create TBF with mtu setting
Test 320a: Create TBF with peakrate setting
Test 239b: Create TBF with latency setting
Test c975: Create TBF with overhead setting
Test 948c: Create TBF with linklayer setting
Test 3549: Replace TBF with mtu
Test f948: Change TBF with latency time
Test 2348: Show TBF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test ba39: Add taprio Qdisc to multi-queue device (8 queues)
Test 9462: Add taprio Qdisc with multiple sched-entry
Test 8d92: Add taprio Qdisc with txtime-delay
Test d092: Delete taprio Qdisc with valid handle
Test 8471: Show taprio class
Test 0a85: Add taprio Qdisc to single-queue device
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 283e: Create skbprio with default setting
Test c086: Create skbprio with limit setting
Test 6733: Change skbprio with limit setting
Test 2958: Show skbprio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 7482: Create SFQ with default setting
Test c186: Create SFQ with limit setting
Test ae23: Create SFQ with perturb setting
Test a430: Create SFQ with quantum setting
Test 4539: Create SFQ with divisor setting
Test b089: Create SFQ with flows setting
Test 99a0: Create SFQ with depth setting
Test 7389: Create SFQ with headdrop setting
Test 6472: Create SFQ with redflowlimit setting
Test 8929: Show SFQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3294: Create SFB with default setting
Test 430a: Create SFB with rehash setting
Test 3410: Create SFB with db setting
Test 49a0: Create SFB with limit setting
Test 1241: Create SFB with max setting
Test 3249: Create SFB with target setting
Test 30a9: Create SFB with increment setting
Test 239a: Create SFB with decrement setting
Test 9301: Create SFB with penalty_rate setting
Test 2a01: Create SFB with penalty_burst setting
Test 3209: Change SFB with rehash setting
Test 5447: Show SFB class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3289: Create PLUG with default setting
Test 0917: Create PLUG with block setting
Test 483b: Create PLUG with release setting
Test 4995: Create PLUG with release_indefinite setting
Test 389c: Create PLUG with limit setting
Test 384a: Delete PLUG with valid handle
Test 439a: Replace PLUG with limit setting
Test 9831: Change PLUG with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 900c: Create pfifo_fast with default setting
Test 7470: Dump pfifo_fast stats
Test b974: Replace pfifo_fast with different handle
Test 3240: Delete pfifo_fast with valid handle
Test 4385: Delete pfifo_fast with invalid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 4812: Create HHF with default setting
Test 8a92: Create HHF with limit setting
Test 3491: Create HHF with quantum setting
Test ba04: Create HHF with reset_timeout setting
Test 4238: Create HHF with admit_bytes setting
Test 839f: Create HHF with evict_timeout setting
Test a044: Create HHF with non_hh_weight setting
Test 32f9: Change HHF with limit setting
Test 385e: Show HHF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 8942: Create GRED with default setting
Test 5783: Create GRED with grio setting
Test 8a09: Create GRED with limit setting
Test 48cb: Create GRED with ecn setting
Test 763a: Change GRED setting
Test 8309: Show GRED class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 983b: Create FQ with default setting
Test 38a1: Create FQ with limit packet setting
Test 0a18: Create FQ with flow_limit setting
Test 2390: Create FQ with quantum setting
Test 845b: Create FQ with initial_quantum setting
Test 9398: Create FQ with maxrate setting
Test 342c: Create FQ with nopacing setting
Test 6391: Create FQ with refill_delay setting
Test 238b: Create FQ with low_rate_threshold setting
Test 7582: Create FQ with orphan_mask setting
Test 4894: Create FQ with timer_slack setting
Test 324c: Create FQ with ce_threshold setting
Test 424a: Create FQ with horizon time setting
Test 89e1: Create FQ with horizon_cap setting
Test 32e1: Delete FQ with valid handle
Test 49b0: Replace FQ with limit setting
Test 9478: Change FQ with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 34ba: Create ETF with default setting
Test 438f: Create ETF with delta nanos setting
Test 9041: Create ETF with deadline_mode setting
Test 9a0c: Create ETF with skip_sock_check setting
Test 2093: Delete ETF with valid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 983a: Create CODEL with default setting
Test 38aa: Create CODEL with limit packet setting
Test 9178: Create CODEL with target setting
Test 78d1: Create CODEL with interval setting
Test 238a: Create CODEL with ecn setting
Test 939c: Create CODEL with ce_threshold setting
Test 8380: Delete CODEL with valid handle
Test 289c: Replace CODEL with limit setting
Test 0648: Change CODEL with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 8937: Create CHOKE with default setting
Test 48c0: Create CHOKE with min packet setting
Test 38c1: Create CHOKE with max packet setting
Test 234a: Create CHOKE with ecn setting
Test 4380: Create CHOKE with burst setting
Test 48c7: Delete CHOKE with valid handle
Test 4398: Replace CHOKE with min setting
Test 0301: Change CHOKE with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 7628: Create ATM with default setting
Test 390a: Delete ATM with valid handle
Test 32a0: Show ATM class
Test 6310: Dump ATM stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the tests are run in a function $@ there actually contains the
function arguments, not the script ones.
Pass "$@" to the function as well.
Fixes: 272d1f4cfa ("selftests: bpf: test_kmod.sh: Pass parameters to the module")
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220926092320.564631-1-ykaliuta@redhat.com
Skip selftests that require EPT support in the VM when it is not
available. For example, if running on a machine where kvm_intel.ept=N
since KVM does not offer EPT support to guests if EPT is not supported
on the host.
This commit causes vmx_dirty_log_test to be skipped instead of failing
on hosts where kvm_intel.ept=N.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220926171457.532542-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So
if bind success or errno != EADDRINUSE, testcase should be failed.
Fixes: 3ca8e40299 ("soreuseport: BPF selection functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1663916557-10730-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset
won't work because of the extra endbr instruction.
As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection
and using appropriate offset value based on that.
Also removing test7 program, because it does the same as test6.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing return value of kprobe's version of bpf_get_func_ip
to return zero if the attach address is not on the function's
entry point.
For kprobes attached in the middle of the function we can't easily
get to the function address especially now with the CONFIG_X86_KERNEL_IBT
support.
If user cares about current IP for kprobes attached within the
function body, they can get it with PT_REGS_IP(ctx).
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martynas reported bpf_get_func_ip returning +4 address when
CONFIG_X86_KERNEL_IBT option is enabled.
When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction
at the function entry, which screws return value of bpf_get_func_ip()
helper that should return the function address.
There's short term workaround for kprobe_multi bpf program made by
Alexei [1], but we need this fixup also for bpf_get_attach_cookie,
that returns cookie based on the entry_ip value.
Moving the fixup in the fprobe handler, so both bpf_get_func_ip
and bpf_get_attach_cookie get expected function address when
CONFIG_X86_KERNEL_IBT option is enabled.
Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip
so it's clearer this is an ftrace __fentry__ ip.
[1] commit 7f0059b58f ("selftests/bpf: Fix kprobe_multi test.")
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When mremap call results in expansion, it might be possible to merge the
VMA with the next VMA which might become adjacent. This patch adds
vma_merge call after the expansion is done to try and merge.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20220603145719.1012094-3-matenajakub@gmail.com
Signed-off-by: Jakub Matěna <matenajakub@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is a test suite that uses the radix test infrastructure. It has been
split into its own commit to allow for easier review of the maple tree
code.
The testing includes:
- Allocation of nodes
- gfp flag allocation checks
- Expansion & contraction of tree
- preallocation checks
- tree navigation by next/prev
- tree navigation by iterators (mas_for_each, etc)
- Number of nodes for a given number of entries
- Generic tree construction tests
- Addition and removal of entries in forward and reverse numerical indexes
- gap searching both forward and reverse
- Combining gaps by overwriting entries in different ways
- splitting right-most node
- splitting left-most node
- overwriting multiple slots
- overwriting across different levels of the tree
- overwriting the middle of a tree
- causing a 3-way split up to the root by overwriting the last slot and
first slot of different nodes and spanning different levels
- RCU stress testing of the tree with threads
- Duplication of the tree by entry count
- Tests which were generated by fuzzers have been added.
- A large number of tests which come from recording crashing in a VM and
reconstructing the tree (see check_erase2_set())
Link: https://lkml.kernel.org/r/20220906194824.2110408-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
maple tree uses lockdep_is_held, so define it as external in the header.
Link: https://lkml.kernel.org/r/20220906194824.2110408-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for kmem_cache_free_bulk() and kmem_cache_alloc_bulk() to the
radix tree test suite.
Link: https://lkml.kernel.org/r/20220906194824.2110408-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add functions to get the number of allocations, and total allocations from
a kmem_cache. Also add a function to get the allocated size and a way to
zero the total allocations.
Link: https://lkml.kernel.org/r/20220906194824.2110408-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmem_cache_set_non_kernel() is a mechanism to allow a certain number of
kmem_cache_alloc requests to succeed even when GFP_KERNEL is not set in
the flags. This functionality allows for testing different paths though
the code.
Link: https://lkml.kernel.org/r/20220906194824.2110408-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Introducing the Maple Tree"
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 70):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
There is additional BUG_ON() calls added within the tree, most of which
are in debug code. These will be replaced with a WARN_ON() call in the
future. There is also additional BUG_ON() calls within the code which
will also be reduced in number at a later date. These exist to catch
things such as out-of-range accesses which would crash anyways.
Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can make the phc2sys helper not only synchronize a PHC to
CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME
to a PHC, which is going to be needed in distributed TSN tests.
Instead of making the complexity of the arguments passed to
phc2sys_start() explode, we can let it figure out the sync direction
automatically, based on ptp4l's port states.
Towards that goal, pass just the path to the desired ptp4l instance's
UNIX domain socket, and remove the $if_name argument (from which it
derives the PHC). Also adapt the one caller from the ocelot psfp.sh
test. In the case of psfp.sh, phc2sys_start is able to properly figure
out that CLOCK_REALTIME is the source clock and swp1's PHC is the
destination, because of the way in which ptp4l_start for the
UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always
win the BMCA and always become the sync master between itself and $h1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PID variable for the isochron receiver into a separate
namespace per stats port, to allow multiple receivers (and/or
orchestration daemons) to be instantiated by the same script.
Preserve the existing behavior by making isochron_do() use the default
stats TCP port of 5000.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch ports will want to act as Boundary Clocks, which are configured
using ptp4l by specifying the "-i" argument multiple times.
Since we track a log file and a pid file for each ptp4l instance, and we
want to be compatible with the existing single-port callers of
ptp4l_start and ptp4l_stop, pass the interface list as a single string
of space-separated values. Based on this, we create a label for each
ptp4l instance, where the spaces are replaced with underscores
(ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extra_args argument ($3) of isochron_recv_start is overwritten with
uds ($2), if that argument exists.
This is currently not a problem, because the only TSN selftest
(ocelot/psfp.sh) omits remote sync so it does not specify to the
receiver a UNIX domain socket for ptp4l. So $uds is currently an empty
string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a syntax error test case for eprobe as same as kprobes.
Link: https://lkml.kernel.org/r/165932115471.2850673.8014722990775242727.stgit@devnote2
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a test to verify that KVM_{G,S}ET_EVENTS play nice with pending vs.
injected exceptions when an exception is being queued for L2, and that
KVM correctly handles L1's exception intercept wants.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-27-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the vmx.h and svm.h uapi headers that KVM so kindly provides
instead of manually defining all the same exit reasons/code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-26-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The updated Enlightened VMCS definition has 'encls_exiting_bitmap'
field which needs mapping to VMCS, add the missing encoding.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-13-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require KVM_CAP_VM_DISABLE_NX_HUGE_PAGES for the entire NX hugepage test
instead of skipping the "disable" subtest if the capability isn't
supported by the host kernel. While the "enable" subtest does provide
value when the capability isn't supported, silently providing only half
the promised coveraged is undesirable, i.e. it's better to skip the test
so that the user knows something.
Alternatively, the test could print something to alert the user instead
of silently skipping the subtest, but that would encourage other tests
to follow suit, and it's not clear that it's desirable to take selftests
in that direction. And if selftests do head down the path of skipping
subtests, such behavior needs first-class support in the framework.
Opportunistically convert other test preconditions to TEST_REQUIRE().
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20220812175301.3915004-1-oliver.upton@linux.dev
[sean: rewrote changelog to capture discussion about skipping the test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add one test for wait redirect sock's send memory test for sockmap.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220823133755.314697-3-liujian56@huawei.com
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYy+skgAKCRDfioYZHlFs
Zxw3AQCVDbuMh2wBUSJP4G4XF+ZHM+FntpUmawcmUFsEjt0fGQEA9NCjOoj7jLlP
BrI1OtbskTLAMzJeRI3qY3irV4iHsAI=
=28T9
-----END PGP SIGNATURE-----
Merge tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull NVDIMM and DAX fixes from Dan Williams:
"A recently discovered one-line fix for devdax that further addresses a
v5.5 regression, and (a bit embarrassing) a small batch of fixes that
have been sitting in my fixes tree for weeks.
The older fixes have soaked in linux-next during that time and address
an fsdax infinite loop and some other minor fixups.
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups"
* tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
devdax: Fix soft-reservation memory description
fsdax: Fix infinite loop in dax_iomap_rw()
nvdimm/namespace: drop nested variable in create_namespace_pmem()
ndtest: Cleanup all of blk namespace specific code
pmem: fix a name collision
Add -l (--log-level) flag to override default BPF verifier log lever.
This only matters in verbose mode, which is the mode in which veristat
emits verifier log for each processed BPF program.
This is important because for successfully verified BPF programs
log_level 1 is empty, as BPF verifier truncates all the successfully
verified paths. So -l2 is the only way to actually get BPF verifier log
in practice. It looks sometihng like this:
[vmuser@archvm bpf]$ sudo ./veristat xdp_tx.bpf.o -vl2
Processing 'xdp_tx.bpf.o'...
PROCESSING xdp_tx.bpf.o/xdp_tx, DURATION US: 19, VERDICT: success, VERIFIER LOG:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
; return XDP_TX;
0: (b4) w0 = 3 ; R0_w=3
1: (95) exit
verification time 19 usec
stack depth 0
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
File Program Verdict Duration (us) Total insns Total states Peak states
------------ ------- ------- ------------- ----------- ------------ -----------
xdp_tx.bpf.o xdp_tx success 19 2 0 0
------------ ------- ------- ------------- ----------- ------------ -----------
Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Emit "Processing <filepath>..." for each BPF object file to be
processed, to show progress. But also add -q (--quiet) flag to silence
such messages. Doing something more clever (like overwriting same output
line) is to cumbersome and easily breakable if there is any other
console output (e.g., errors from libbpf).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make veristat ignore non-BPF object files. This allows simpler
mass-verification (e.g., `sudo ./veristat *.bpf.o` in selftests/bpf
directory). Note that `sudo ./veristat *.o` would also work, but with
selftests's multiple copies of BPF object files (.bpf.o and
.bpf.linked{1,2,3}.o) it's 4x slower.
Also, given some of BPF object files could be incomplete in the sense
that they are meant to be statically linked into final BPF object file
(like linked_maps, linked_funcs, linked_vars), note such instances in
stderr, but proceed anyways. This seems like a better trade off between
completely silently ignoring BPF object file and aborting
mass-verification altogether.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure veristat doesn't spend ridiculous amount of time parsing
verifier stats from verifier log, especially for very large logs or
truncated logs (e.g., when verifier returns -ENOSPC due to too small
buffer). For this, parse lines from the end of the log and make sure we
parse only up to 100 last lines, where stats should be, if at all.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cgroup_hierarchical_stats selftest is complicated. It has to be,
because it tests an entire workflow of recording, aggregating, and
dumping cgroup stats. However, some of the complexity is unnecessary.
The test now enables the memory controller in a cgroup hierarchy, invokes
reclaim, measure reclaim time, THEN uses that reclaim time to test the
stats collection and aggregation. We don't need to use such a
complicated stat, as the context in which the stat is collected is
orthogonal.
Simplify the test by using a simple stat instead of reclaim time, the
total number of times a process has ever entered a cgroup. This makes
the test simpler and removes the dependency on the memory controller and
the memory reclaim interface.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220919175330.890793-1-yosryahmed@google.com
It's not currently possible but in the future we may get
IORING_CQE_F_MORE and so a notification even for a failed request, i.e.
when cqe->res <= 0. That's precisely what the documentation says, so
adjust the test and do IORING_CQE_F_MORE checks regardless of the main
completion cqe->res.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aac948ea753a8bfe1fa3b82fe45debcb54586369.1663953085.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
for-6.0 has the following fix for cgroup_get_from_id().
836ac87d ("cgroup: fix cgroup_get_from_id")
which conflicts with the following two commits in for-6.1.
4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id")
fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value")
While the resolution is straightforward, the code ends up pretty ugly
afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be
fixed up there.
Signed-off-by: Tejun Heo <tj@kernel.org>
* Fix for kmemleak with pKVM
s390:
* Fixes for VFIO with zPCI
* smatch fix
x86:
* Ensure XSAVE-capable hosts always allow FP and SSE state to be saved
and restored via KVM_{GET,SET}_XSAVE
* Fix broken max_mmu_rmap_size stat
* Fix compile error with old glibc that doesn't have gettid()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmMtvg4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNy2Af/VybWK2uAbaMkV6irQ1YTJIrRPco1
C+JQdiQklYbjzThfPWNF/MiH+VTObloR1KqztOeQbfcrgwzygO68D3bs0wkAukLA
mtdcMjdsqNx8r9u533i6S8Dpo0RkHKl+I8+3mHdPHTzlrbCuYJFFFxFNLhE+xbrK
DP2Gl/xXIGYwOv2nfHA/xxI7TRICv4IxmzQazxlmC27n6BLNSr8qp6jI9lXJQfJ8
XJh3SbmRux3/cs2oEqONg8DySJh631kI1jGGOmL3qk07ZR7A5KZ+lju0xM7vQIEq
aR25YNYZux+BPIY/WxT1R0j6pwinBmFp8OoQYCs8DaQ65fdE5gegtJRpow==
=VADm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"As everyone back came back from conferences, here are the pending
patches for Linux 6.0.
ARM:
- Fix for kmemleak with pKVM
s390:
- Fixes for VFIO with zPCI
- smatch fix
x86:
- Ensure XSAVE-capable hosts always allow FP and SSE state to be
saved and restored via KVM_{GET,SET}_XSAVE
- Fix broken max_mmu_rmap_size stat
- Fix compile error with old glibc that doesn't have gettid()"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES
KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0
KVM: x86/mmu: add missing update to max_mmu_rmap_size
selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
KVM: s390: pci: register pci hooks without interpretation
KVM: s390: pci: fix GAIT physical vs virtual pointers usage
KVM: s390: Pass initialized arg even if unused
KVM: s390: pci: fix plain integer as NULL pointer warnings
KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
Fix for a code analyser warning
-----BEGIN PGP SIGNATURE-----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=Z7gl
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
More pci fixes
Fix for a code analyser warning
It looks like this test has been accidentally dropped when resolving
conflicts in this Makefile.
Most probably because there were 3 different patches modifying this file
in parallel:
commit 152e8ec776 ("selftests/bonding: add a test for bonding lladdr target")
commit bbb774d921 ("net: Add tests for bonding and team address list management")
commit 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
The first one was applied in 'net-next' while the two other ones were
recently applied in the 'net' tree.
But that's alright, easy to fix by re-adding the missing one!
Fixes: 0140a7168f ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220923082306.2468081-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The livepatch kselftests rely on comparing expected and actual output
from such commands as sysctl. A recent commit in procps-ng v4.0.0 [1]
changed sysctl's output to emit key pathnames like:
sysctl: setting key "/proc/sys/kernel/ftrace_enabled": Device or resource busy
versus previous dotted output:
sysctl: setting key "kernel.ftrace_enabled": Device or resource busy
The modification in output was later reverted [2], but since the change
has been tagged in procps-ng v4.0.0, update the livepatch kselftest to
handle either case.
[1] 6389deca5b
[2] b159c198c9
Reported-by: Dennis(Zhuoheng) Li <denli@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220811212138.182575-1-joe.lawrence@redhat.com
Test 290a: Show RED class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 2410: Show prio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 1023: Show mq class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0521: Show ingress class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0582: Create QFQ with default setting
Test c9a3: Create QFQ with class weight setting
Test 8452: Create QFQ with class maxpkt setting
Test d920: Create QFQ with multiple class setting
Test 0548: Delete QFQ with handle
Test 5901: Show QFQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test cb28: Create NETEM with default setting
Test a089: Create NETEM with limit flag
Test 3449: Create NETEM with delay time
Test 3782: Create NETEM with distribution and corrupt flag
Test 2b82: Create NETEM with distribution and duplicate flag
Test a932: Create NETEM with distribution and loss flag
Test e01a: Create NETEM with distribution and loss state flag
Test ba29: Create NETEM with loss gemodel flag
Test 0492: Create NETEM with reorder flag
Test 7862: Create NETEM with rate limit
Test 7235: Create NETEM with multiple slot rate
Test 5439: Create NETEM with multiple slot setting
Test 5029: Change NETEM with loss state
Test 3785: Replace NETEM with delay time
Test 4502: Delete NETEM with handle
Test 0785: Show NETEM class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 20ba: Add multiq Qdisc to multi-queue device (8 queues)
Test 4301: List multiq Class
Test 7832: Delete nonexistent multiq Qdisc
Test 2891: Delete multiq Qdisc twice
Test 1329: Add multiq Qdisc to single-queue device
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 9903: Add mqprio Qdisc to multi-queue device (8 queues)
Test 453a: Delete nonexistent mqprio Qdisc
Test 5292: Delete mqprio Qdisc twice
Test 45a9: Add mqprio Qdisc to single-queue device
Test 2ba9: Show mqprio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0904: Create HTB with default setting
Test 3906: Create HTB with default-N setting
Test 8492: Create HTB with r2q setting
Test 9502: Create HTB with direct_qlen setting
Test b924: Create HTB with class rate and burst setting
Test 4359: Create HTB with class mpu setting
Test 9048: Create HTB with class prio setting
Test 4994: Create HTB with class ceil setting
Test 9523: Create HTB with class cburst setting
Test 5353: Create HTB with class mtu setting
Test 346a: Create HTB with class quantum setting
Test 303a: Delete HTB with handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 3254: Create HFSC with default setting
Test 0289: Create HFSC with class sc and ul rate setting
Test 846a: Create HFSC with class sc umax and dmax setting
Test 5413: Create HFSC with class rt and ls rate setting
Test 9312: Create HFSC with class rt umax and dmax setting
Test 6931: Delete HFSC with handle
Test 8436: Show HFSC class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 4957: Create FQ_CODEL with default setting
Test 7621: Create FQ_CODEL with limit setting
Test 6871: Create FQ_CODEL with memory_limit setting
Test 5636: Create FQ_CODEL with target setting
Test 630a: Create FQ_CODEL with interval setting
Test 4324: Create FQ_CODEL with quantum setting
Test b190: Create FQ_CODEL with noecn flag
Test 5381: Create FQ_CODEL with ce_threshold setting
Test c9d2: Create FQ_CODEL with drop_batch setting
Test 523b: Create FQ_CODEL with multiple setting
Test 9283: Replace FQ_CODEL with noecn setting
Test 3459: Change FQ_CODEL with limit setting
Test 0128: Delete FQ_CODEL with handle
Test 0435: Show FQ_CODEL class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 6345: Create DSMARK with default setting
Test 3462: Create DSMARK with default_index setting
Test ca95: Create DSMARK with set_tc_index flag
Test a950: Create DSMARK with multiple setting
Test 4092: Delete DSMARK with handle
Test 5930: Show DSMARK class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0385: Create DRR with default setting
Test 2375: Delete DRR with handle
Test 3092: Show DRR class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 1820: Create CBS with default setting
Test 1532: Create CBS with hicredit setting
Test 2078: Create CBS with locredit setting
Test 9271: Create CBS with sendslope setting
Test 0482: Create CBS with idleslope setting
Test e8f3: Create CBS with multiple setting
Test 23c9: Replace CBS with sendslope setting
Test a07a: Change CBS with idleslope setting
Test 43b3: Delete CBS with handle
Test 9472: Show CBS class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 3460: Create CBQ with default setting
Test 0592: Create CBQ with mpu
Test 4684: Create CBQ with valid cell num
Test 4345: Create CBQ with invalid cell num
Test 4525: Create CBQ with valid ewma
Test 6784: Create CBQ with invalid ewma
Test 5468: Delete CBQ with handle
Test 492a: Show CBQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 1212: Create CAKE with default setting
Test 3281: Create CAKE with bandwidth limit
Test c940: Create CAKE with autorate-ingress flag
Test 2310: Create CAKE with rtt time
Test 2385: Create CAKE with besteffort flag
Test a032: Create CAKE with diffserv8 flag
Test 2349: Create CAKE with diffserv4 flag
Test 8472: Create CAKE with flowblind flag
Test 2341: Create CAKE with dsthost and nat flag
Test 5134: Create CAKE with wash flag
Test 2302: Create CAKE with flowblind and no-split-gso flag
Test 0768: Create CAKE with dual-srchost and ack-filter flag
Test 0238: Create CAKE with dual-dsthost and ack-filter-aggressive flag
Test 6572: Create CAKE with memlimit and ptm flag
Test 2436: Create CAKE with fwmark and atm flag
Test 3984: Create CAKE with overhead and mpu
Test 5421: Create CAKE with conservative and ingress flag
Test 6854: Delete CAKE with conservative and ingress flag
Test 2342: Replace CAKE with mpu
Test 2313: Change CAKE with mpu
Test 4365: Show CAKE class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Free the created fd or allocated bpf_object after test case succeeds,
else there will be resource leaks.
Spotted by using address sanitizer and checking the content of
/proc/$pid/fd directory.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220921070035.2016413-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Destroy the created skeleton when CONFIG_PREEMPT is off, else will be
resource leak.
Fixes: 73b97bc78b ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220921070035.2016413-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The following warning appears when executing:
make -C tools/testing/selftests/kvm
rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
(void *)(unsigned long)gettid());
^~~~~~
getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1
Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added urandom_read shared lib is missing from the list of installed
files what makes urandom_read test after `make install` or `make
gen_tar` broken.
Add the library to TEST_GEN_FILES. The names in the list do not
contain $(OUTPUT) since it's added by lib.mk code.
Fixes: 00a0fa2d7d ("selftests/bpf: Add urandom_read shared lib and USDTs")
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920161409.129953-1-ykaliuta@redhat.com
We use a local variable hwcap to refer to the element of the hwcaps array
which we are currently checking. When checking for the relevant hwcap bit
being set in testing we were dereferencing hwcaps rather than hwcap in
fetching the AT_HWCAP to use, which is perfectly valid C but means we were
always checking the bit was set in the hwcap for whichever feature is first
in the array. Remove the stray s.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220907113400.12982-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A handful of awaited fixes here - revert of the FEC changes,
bluetooth fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on
a couple of platforms in a false-positive-ish way. If we can't
iron that out over the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes
in 6.0-rcs but it may actually give the false impression that
those are problematic or that more testing time would have
caught them. So likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change"
- Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wrep
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wifi, netfilter and can.
A handful of awaited fixes here - revert of the FEC changes, bluetooth
fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on a couple of
platforms in a false-positive-ish way. If we can't iron that out over
the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes in
6.0-rcs but it may actually give the false impression that those are
problematic or that more testing time would have caught them. So
likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change" and the related
"net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814"
* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
selftests: forwarding: add shebang for sch_red.sh
bnxt: prevent skb UAF after handing over to PTP worker
net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
net: sched: fix possible refcount leak in tc_new_tfilter()
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
udp: Use WARN_ON_ONCE() in udp_read_skb()
selftests: bonding: cause oops in bond_rr_gen_slave_id
bonding: fix NULL deref in bond_rr_gen_slave_id
net: phy: micrel: fix shared interrupt on LAN8814
net/smc: Stop the CLC flow if no link to map buffers on
ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
net: atlantic: fix potential memory leak in aq_ndev_close()
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: sh_eth: Fix PHY state warning splat during system resume
net: ravb: Fix PHY state warning splat during system resume
netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
netfilter: ebtables: fix memory leak when blob is malformed
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
...
RHEL/Fedora RPM build checks are stricter, and complain when executable
files don't have a shebang line, e.g.
*** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit
Fix it by adding shebang line.
Fixes: 6cf0291f95 ("selftests: forwarding: Add a RED test for SW datapath")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bonding selftest used to cause a kernel oops on aarch64
and should be architectures agnostic.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add -f (--filter) argument which accepts glob-based filters for
narrowing down what BPF object files and programs within them should be
processed by veristat. This filtering applies both to comparison and
main (verification) mode.
Filter can be of two forms:
- file (object) filter: 'strobemeta*'; in this case all the programs
within matching files are implicitly allowed (or denied, depending
if it's positive or negative rule, see below);
- file and prog filter: 'strobemeta*/*unroll*' will further filter
programs within matching files to only allow those program names that
match '*unroll*' glob.
As mentioned, filters can be positive (allowlisting) and negative
(denylisting). Negative filters should start with '!': '!strobemeta*'
will deny any filename which basename starts with "strobemeta".
Further, one extra special syntax is supported to allow more convenient
use in practice. Instead of specifying rule on the command line,
veristat allows to specify file that contains rules, both positive and
negative, one line per one filter. This is achieved with -f @<filepath>
use, where <filepath> points to a text file containing rules (negative
and positive rules can be mixed). For convenience empty lines and lines
starting with '#' are ignored. This feature is useful to have some
pre-canned list of object files and program names that are tested
repeatedly, allowing to check in a list of rules and quickly specify
them on the command line.
As a demonstration (and a short cut for nearest future), create a small
list of "interesting" BPF object files from selftests/bpf and commit it
as veristat.cfg. It currently includes 73 programs, most of which are
the most complex and largest BPF programs in selftests, as judged by
total verified instruction count and verifier states total.
If there is overlap between positive or negative filters, negative
filter takes precedence (denylisting is stronger than allowlisting). If
no allow filter is specified, veristat implicitly assumes '*/*' rule. If
no deny rule is specified, veristat (logically) assumes no negative
filters.
Also note that -f (just like -e and -s) can be specified multiple times
and their effect is cumulative.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to compare and contrast two veristat runs, previously
recorded with veristat using CSV output format.
When veristat is called with -C (--compare) flag, veristat expects
exactly two input files specified, both should be in CSV format.
Expectation is that it's output from previous veristat runs, but as long
as column names and formats match, it should just work. First CSV file
is designated as a "baseline" provided, and the second one is
comparison (experiment) data set. Establishing baseline matters later
when calculating difference percentages, see below.
Veristat parses these two CSV files and "reconstructs" verifier stats
(it could be just a subset of all possible stats). File and program
names are mandatory as they are used as joining key (these two "stats"
are designated as "key stats" in the code).
Veristat currently enforces that the set of stats recorded in both CSV
has to exactly match, down to exact order. This is just a simplifying
condition which can be lifted with a bit of additional pre-processing to
reorded stat specs internally, which I didn't bother doing, yet.
For all the non-key stats, veristat will output three columns: one for
baseline data, one for comparison data, and one with an absolute and
relative percentage difference. If either baseline or comparison values
are missing (that is, respective CSV file doesn't have a row with
*exactly* matching file and program name), those values are assumed to
be empty or zero. In such case relative percentages are forced to +100%
or -100% output, for consistency with a typical case.
Veristat's -e (--emit) and -s (--sort) specs still apply, so even if CSV
contains lots of stats, user can request to compare only a subset of
them (and specify desired column order as well). Similarly, both CSV and
human-readable table output is honored. Note that input is currently
always expected to be CSV.
Here's an example shell session, recording data for biosnoop tool on two
different kernels and comparing them afterwards, outputting data in table
format.
# on slightly older production kernel
$ sudo ./veristat biosnoop_bpf.o
File Program Verdict Duration (us) Total insns Total states Peak states
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
biosnoop_bpf.o blk_account_io_merge_bio success 37 24 1 1
biosnoop_bpf.o blk_account_io_start failure 0 0 0 0
biosnoop_bpf.o block_rq_complete success 76 104 6 6
biosnoop_bpf.o block_rq_insert success 83 85 7 7
biosnoop_bpf.o block_rq_issue success 79 85 7 7
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
Done. Processed 1 object files, 5 programs.
$ sudo ./veristat ~/local/tmp/fbcode-bpf-objs/biosnoop_bpf.o -o csv > baseline.csv
$ cat baseline.csv
file_name,prog_name,verdict,duration,total_insns,total_states,peak_states
biosnoop_bpf.o,blk_account_io_merge_bio,success,36,24,1,1
biosnoop_bpf.o,blk_account_io_start,failure,0,0,0,0
biosnoop_bpf.o,block_rq_complete,success,82,104,6,6
biosnoop_bpf.o,block_rq_insert,success,78,85,7,7
biosnoop_bpf.o,block_rq_issue,success,74,85,7,7
# on latest bpf-next kernel
$ sudo ./veristat biosnoop_bpf.o
File Program Verdict Duration (us) Total insns Total states Peak states
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
biosnoop_bpf.o blk_account_io_merge_bio success 31 24 1 1
biosnoop_bpf.o blk_account_io_start failure 0 0 0 0
biosnoop_bpf.o block_rq_complete success 76 104 6 6
biosnoop_bpf.o block_rq_insert success 83 91 7 7
biosnoop_bpf.o block_rq_issue success 74 91 7 7
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
Done. Processed 1 object files, 5 programs.
$ sudo ./veristat biosnoop_bpf.o -o csv > comparison.csv
$ cat comparison.csv
file_name,prog_name,verdict,duration,total_insns,total_states,peak_states
biosnoop_bpf.o,blk_account_io_merge_bio,success,71,24,1,1
biosnoop_bpf.o,blk_account_io_start,failure,0,0,0,0
biosnoop_bpf.o,block_rq_complete,success,82,104,6,6
biosnoop_bpf.o,block_rq_insert,success,83,91,7,7
biosnoop_bpf.o,block_rq_issue,success,87,91,7,7
# now let's compare with human-readable output (note that no sudo needed)
# we also ignore verification duration in this case to shortned output
$ ./veristat -C baseline.csv comparison.csv -e file,prog,verdict,insns
File Program Verdict (A) Verdict (B) Verdict (DIFF) Total insns (A) Total insns (B) Total insns (DIFF)
-------------- ------------------------ ----------- ----------- -------------- --------------- --------------- ------------------
biosnoop_bpf.o blk_account_io_merge_bio success success MATCH 24 24 +0 (+0.00%)
biosnoop_bpf.o blk_account_io_start failure failure MATCH 0 0 +0 (+100.00%)
biosnoop_bpf.o block_rq_complete success success MATCH 104 104 +0 (+0.00%)
biosnoop_bpf.o block_rq_insert success success MATCH 91 85 -6 (-6.59%)
biosnoop_bpf.o block_rq_issue success success MATCH 91 85 -6 (-6.59%)
-------------- ------------------------ ----------- ----------- -------------- --------------- --------------- ------------------
While not particularly exciting example (it turned out to be kind of hard to
quickly find a nice example with significant difference just because of kernel
version bump), it should demonstrate main features.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach veristat to output results as CSV table for easier programmatic
processing. Change what was --output/-o argument to now be --emit/-e.
And then use --output-format/-o <fmt> to specify output format.
Currently "table" and "csv" is supported, table being default.
For CSV output mode veristat is using spec identifiers as column names.
E.g., instead of "Total states" veristat uses "total_states" as a CSV
header name.
Internally veristat recognizes three formats, one of them
(RESFMT_TABLE_CALCLEN) is a special format instructing veristat to
calculate column widths for table output. This felt a bit cleaner and
more uniform than either creating separate functions just for this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_object__close(obj) is called twice for BPF object files with single
BPF program in it. This causes crash. Fix this by not calling
bpf_object__close() unnecessarily.
Fixes: c8bc5e0509 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests to ensure that only supported dynamic pointer types are accepted,
that the passed argument is actually a dynamic pointer, that the passed
argument is a pointer to the stack, and that bpf_verify_pkcs7_signature()
correctly handles dynamic pointers with data set to NULL.
The tests are currently in the deny list for s390x (JIT does not support
calling kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-14-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Perform several tests to ensure the correct implementation of the
bpf_verify_pkcs7_signature() kfunc.
Do the tests with data signed with a generated testing key (by using
sign-file from scripts/) and with the tcp_bic.ko kernel module if it is
found in the system. The test does not fail if tcp_bic.ko is not found.
First, perform an unsuccessful signature verification without data.
Second, perform a successful signature verification with the session
keyring and a new one created for testing.
Then, ensure that permission and validation checks are done properly on the
keyring provided to bpf_verify_pkcs7_signature(), despite those checks were
deferred at the time the keyring was retrieved with bpf_lookup_user_key().
The tests expect to encounter an error if the Search permission is removed
from the keyring, or the keyring is expired.
Finally, perform a successful and unsuccessful signature verification with
the keyrings with pre-determined IDs (the last test fails because the key
is not in the platform keyring).
The test is currently in the deny list for s390x (JIT does not support
calling kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20220920075951.929132-13-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to ensure that bpf_lookup_user_key() creates a referenced
special keyring when the KEY_LOOKUP_CREATE flag is passed to this function.
Ensure that the kfunc rejects invalid flags.
Ensure that a keyring can be obtained from bpf_lookup_system_key() when one
of the pre-determined keyring IDs is provided.
The test is currently blacklisted for s390x (JIT does not support calling
kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20220920075951.929132-12-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add verifier tests for bpf_lookup_*_key() and bpf_key_put(), to ensure that
acquired key references stored in the bpf_key structure are released, that
a non-NULL bpf_key pointer is passed to bpf_key_put(), and that key
references are not leaked.
Also, slightly modify test_verifier.c, to find the BTF ID of the attach
point for the LSM program type (currently, it is done only for TRACING).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-11-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the eBPF CI does not support kernel modules, change the kernel config
to compile everything as built-in.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Daniel Müller <deso@posteo.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-10-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move dynptr type check to is_dynptr_type_expected() from
is_dynptr_reg_valid_init(), so that callers can better determine the cause
of a negative result (dynamic pointer not valid/initialized, dynamic
pointer of the wrong type). It will be useful for example for BTF, to
restrict which dynamic pointer types can be passed to kfuncs, as initially
only the local type will be supported.
Also, splitting makes the code more readable, since checking the dynamic
pointer type is not necessarily related to validity and initialization.
Split the validity/initialization and dynamic pointer type check also in
the verifier, and adjust the expected error message in the test (a test for
an unexpected dynptr type passed to a helper cannot be added due to missing
suitable helpers, but this case has been tested manually).
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-4-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's possible to specify particular tests for test_bpf.ko with
module parameters. Make it possible to pass the module parameters,
example:
test_kmod.sh test_range=1,3
Since magnitude tests take long time it can be reasonable to skip
them.
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220908120146.381218-1-ykaliuta@redhat.com
This change includes selftests that validate the expected behavior and
APIs of the new BPF_MAP_TYPE_USER_RINGBUF map type.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-5-void@manifault.com
The attach flags is meaningless for effective query and
its value will always be set as 0 during effective query.
Root cg's effective progs is always its attached progs,
so we use non-effective query to get its progs count and
attach flags. And we don't need the remain attach flags
check.
Fixes: b79c9fc955 ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20220921104604.2340580-4-pulehui@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
