arm64: dts: qcom: sm8350-sagami: Add GPIO line names for PMIC GPIOs

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX213&214 DTSIs to better document the hardware.

Diff between 223 and 224:

pm8350b
< 	gpio-line-names = "NC", /* GPIO_1 */
> 	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
< 			  "NC",
> 			  "CAM_PWR_LD_EN",

pm8350c
< 			  "NC",
> 			  "WLC_TXPWR_EN",

Which is due to different camera power wiring on 213 and lack of an
additional SLG51000 PMIC on 214.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118152028.59312-3-konrad.dybcio@linaro.org
This commit is contained in:
Konrad Dybcio 2022-11-18 16:20:28 +01:00 committed by Bjorn Andersson
parent 8875b1d71f
commit 7c679f2a2a
3 changed files with 64 additions and 0 deletions

View File

@ -17,3 +17,26 @@
height = <2520>;
stride = <(1080 * 4)>;
};
&pm8350b_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"NC",
"NC",
"SNAPSHOT_N",
"NC",
"NC",
"FOCUS_N";
};
&pm8350c_gpios {
gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
"FL_STROBE_TRIG_TELE",
"NC",
"NC",
"NC",
"RGBC_IR_PWR_EN",
"NC",
"NC",
"WIDEC_PWR_EN";
};

View File

@ -68,6 +68,15 @@
};
&pm8350b_gpios {
gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
"NC",
"NC",
"NC",
"SNAPSHOT_N",
"CAM_PWR_LD_EN",
"NC",
"FOCUS_N";
cam_pwr_a_cs: cam-pwr-a-cs-state {
pins = "gpio1";
function = "normal";
@ -78,6 +87,18 @@
};
};
&pm8350c_gpios {
gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
"FL_STROBE_TRIG_TELE",
"NC",
"WLC_TXPWR_EN",
"NC",
"RGBC_IR_PWR_EN",
"NC",
"NC",
"WIDEC_PWR_EN";
};
&tlmm {
gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
"APPS_I2C_0_SCL",

View File

@ -534,6 +534,26 @@
firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
};
&pm8350_gpios {
gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
"LCD_ID",
"SDR_MMW_THERM",
"RF_ID",
"NC",
"FP_LDO_EN",
"SP_ARI_PWR_ALARM",
"NC",
"G_ASSIST_N",
"PM8350_OPTION"; /* GPIO_10 */
};
&pmk8350_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"VOL_DOWN_N",
"PMK8350_OPTION";
};
&pmk8350_rtc {
status = "okay";
};