mirror_lxc/config/init/common/lxc-net.in

#!/bin/sh -

distrosysconfdir="@LXC_DISTRO_SYSCONF@"
varrun="@RUNTIME_PATH@/lxc"
varlib="@LOCALSTATEDIR@/lib"

# These can be overridden in @LXC_DISTRO_SYSCONF@/lxc
#   or in @LXC_DISTRO_SYSCONF@/lxc-net

USE_LXC_BRIDGE="true"
LXC_BRIDGE="lxcbr0"
LXC_BRIDGE_MAC="00:16:3e:00:00:00"
LXC_ADDR="10.0.3.1"
LXC_NETMASK="255.255.255.0"
LXC_NETWORK="10.0.3.0/24"
LXC_DHCP_RANGE="10.0.3.2,10.0.3.254"
LXC_DHCP_MAX="253"
LXC_DHCP_CONFILE=""
LXC_DHCP_PING="true"
LXC_DOMAIN=""

LXC_IPV6_ADDR=""
LXC_IPV6_MASK=""
LXC_IPV6_NETWORK=""
LXC_IPV6_NAT="false"

[ ! -f $distrosysconfdir/lxc ] || . $distrosysconfdir/lxc

use_iptables_lock="-w"
iptables -w -L -n > /dev/null 2>&1 || use_iptables_lock=""

_netmask2cidr ()
{
    # Assumes there's no "255." after a non-255 byte in the mask
    local x=${1##*255.}
    set -- 0^^^128^192^224^240^248^252^254^ $(( (${#1} - ${#x})*2 )) ${x%%.*}
    x=${1%%$3*}
    echo $(( $2 + (${#x}/4) ))
}

_ifdown() {
    ip addr flush dev ${LXC_BRIDGE}
    ip link set dev ${LXC_BRIDGE} down
}

_ifup() {
    MASK=`_netmask2cidr ${LXC_NETMASK}`
    CIDR_ADDR="${LXC_ADDR}/${MASK}"
    ip addr add ${CIDR_ADDR} dev ${LXC_BRIDGE}
    ip link set dev ${LXC_BRIDGE} address $LXC_BRIDGE_MAC
    ip link set dev ${LXC_BRIDGE} up
}

start() {
    [ "x$USE_LXC_BRIDGE" = "xtrue" ] || { exit 0; }

    [ ! -f "${varrun}/network_up" ] || { echo "lxc-net is already running"; exit 1; }

    if [ -d /sys/class/net/${LXC_BRIDGE} ]; then
        stop force || true
    fi

    FAILED=1

    cleanup() {
        set +e
        if [ "$FAILED" = "1" ]; then
            echo "Failed to setup lxc-net." >&2
            stop force
            exit 1
        fi
    }

    trap cleanup EXIT HUP INT TERM
    set -e

    # set up the lxc network
    [ ! -d /sys/class/net/${LXC_BRIDGE} ] && ip link add dev ${LXC_BRIDGE} type bridge
    echo 1 > /proc/sys/net/ipv4/ip_forward
    echo 0 > /proc/sys/net/ipv6/conf/${LXC_BRIDGE}/accept_dad || true

    # if we are run from systemd on a system with selinux enabled,
    # the mkdir will create /run/lxc as init_var_run_t which dnsmasq
    # can't write its pid into, so we restorecon it (to var_run_t)
    if [ ! -d "${varrun}" ]; then
        mkdir -p "${varrun}"
        if which restorecon >/dev/null 2>&1; then
            restorecon "${varrun}"
        fi
    fi

    _ifup

    LXC_IPV6_ARG=""
    if [ -n "$LXC_IPV6_ADDR" ] && [ -n "$LXC_IPV6_MASK" ] && [ -n "$LXC_IPV6_NETWORK" ]; then
        echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
        echo 0 > /proc/sys/net/ipv6/conf/${LXC_BRIDGE}/autoconf
        ip -6 addr add dev ${LXC_BRIDGE} ${LXC_IPV6_ADDR}/${LXC_IPV6_MASK}
        if [ "$LXC_IPV6_NAT" = "true" ]; then
            ip6tables $use_iptables_lock -t nat -A POSTROUTING -s ${LXC_IPV6_NETWORK} ! -d ${LXC_IPV6_NETWORK} -j MASQUERADE
        fi
        LXC_IPV6_ARG="--dhcp-range=${LXC_IPV6_ADDR},ra-only --listen-address ${LXC_IPV6_ADDR}"
    fi
    iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
    iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
    iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
    iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p tcp --dport 53 -j ACCEPT
    iptables $use_iptables_lock -I FORWARD -i ${LXC_BRIDGE} -j ACCEPT
    iptables $use_iptables_lock -I FORWARD -o ${LXC_BRIDGE} -j ACCEPT
    iptables $use_iptables_lock -t nat -A POSTROUTING -s ${LXC_NETWORK} ! -d ${LXC_NETWORK} -j MASQUERADE
    iptables $use_iptables_lock -t mangle -A POSTROUTING -o ${LXC_BRIDGE} -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill

    LXC_DOMAIN_ARG=""
    if [ -n "$LXC_DOMAIN" ]; then
        LXC_DOMAIN_ARG="-s $LXC_DOMAIN -S /$LXC_DOMAIN/"
    fi

    LXC_DHCP_CONFILE_ARG=""
    if [ -n "$LXC_DHCP_CONFILE" ]; then
        LXC_DHCP_CONFILE_ARG="--conf-file=${LXC_DHCP_CONFILE}"
    fi

    # https://lists.linuxcontainers.org/pipermail/lxc-devel/2014-October/010561.html
    for DNSMASQ_USER in lxc-dnsmasq dnsmasq nobody
    do
        if getent passwd ${DNSMASQ_USER} >/dev/null; then
            break
        fi
    done

    LXC_DHCP_PING_ARG=""
    if [ "x$LXC_DHCP_PING" = "xfalse" ]; then
        LXC_DHCP_PING_ARG="--no-ping"
    fi

    dnsmasq $LXC_DHCP_CONFILE_ARG $LXC_DOMAIN_ARG $LXC_DHCP_PING_ARG -u ${DNSMASQ_USER} \
            --strict-order --bind-interfaces --pid-file="${varrun}"/dnsmasq.pid \
            --listen-address ${LXC_ADDR} --dhcp-range ${LXC_DHCP_RANGE} \
            --dhcp-lease-max=${LXC_DHCP_MAX} --dhcp-no-override \
            --except-interface=lo --interface=${LXC_BRIDGE} \
            --dhcp-leasefile="${varlib}"/misc/dnsmasq.${LXC_BRIDGE}.leases \
            --dhcp-authoritative $LXC_IPV6_ARG || cleanup

    touch "${varrun}"/network_up
    FAILED=0
}

stop() {
    [ "x$USE_LXC_BRIDGE" = "xtrue" ] || { exit 0; }

    [ -f "${varrun}/network_up" ] || [ "$1" = "force" ] || { echo "lxc-net isn't running"; exit 1; }

    if [ -d /sys/class/net/${LXC_BRIDGE} ]; then
        _ifdown 
        iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
        iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
        iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
        iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 53 -j ACCEPT
        iptables $use_iptables_lock -D FORWARD -i ${LXC_BRIDGE} -j ACCEPT
        iptables $use_iptables_lock -D FORWARD -o ${LXC_BRIDGE} -j ACCEPT
        iptables $use_iptables_lock -t nat -D POSTROUTING -s ${LXC_NETWORK} ! -d ${LXC_NETWORK} -j MASQUERADE
        iptables $use_iptables_lock -t mangle -D POSTROUTING -o ${LXC_BRIDGE} -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill

        if [ "$LXC_IPV6_NAT" = "true" ]; then
            ip6tables $use_iptables_lock -t nat -D POSTROUTING -s ${LXC_IPV6_NETWORK} ! -d ${LXC_IPV6_NETWORK} -j MASQUERADE
        fi

        pid=`cat "${varrun}"/dnsmasq.pid 2>/dev/null` && kill -9 $pid
        rm -f "${varrun}"/dnsmasq.pid
        # if $LXC_BRIDGE has attached interfaces, don't destroy the bridge
        ls /sys/class/net/${LXC_BRIDGE}/brif/* > /dev/null 2>&1 || ip link delete ${LXC_BRIDGE}
    fi

    rm -f "${varrun}"/network_up
}

# See how we were called.
case "$1" in
    start)
        start
    ;;

    stop)
        stop
    ;;

    restart|reload|force-reload)
        $0 stop
        $0 start
    ;;

    *)
        echo "Usage: $0 {start|stop|restart|reload|force-reload}"
        exit 2
esac

exit $?