Previous path was $libdir/lxc, changed to $libdir/lxc/rootfs.
Added a README file to be placed in this directory, describing
the purpose of this empty directory. Having a file to be installed
in this directory makes the Makefile to automatically create the
directory at install time.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
lxc-kill send a signal to the process 1 of the container.
If this command is used on an application container ran by
lxc-execute, the lxc-init will receive the signal and will forward it to
the process 2 which is the command specified in the command line.
Signed-off-by: Greg Kurz <gkurz@fr.ibm.com>
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
reformating given examples
and add reference to examples directory.
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
update lxc man page to better explain:
* the notions of persistent and volatil container.
* the difference between lxc-execute and lxc-start commands
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Hello everyone!
I've written a patch which adds a new config keyword
'lxc.cap.drop'. This keyword allows to specify capabilities which are
dropped before executing the container binary.
Example:
lxc.cap.drop = sys_chroot
lxc.cap.drop = mknod
lxc.cap.drop = sys_module
or specify in a single line:
lxc.cap.drop = sys_chroot mknod sys_module
Reworked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Michael Holzt <lxc@my.fqdn.org>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Rename doc/examples/lxc-complex-config.in to lxc-complex.conf.in as all other
examples in this directory have a .conf ending as well.
Signed-off-by: Michael Holzt <lxc@my.fqdn.org>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
few added lines to document the new lxc-create -t option
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
The future kernel 2.6.33 will incorporate the macvlan bridge
mode where all the macvlan will be able to communicate if they are
using the same physical interface. This is an interesting feature
to have containers to communicate together. If we are outside of the
container, we have to setup a macvlan on the same physical interface than
the containers and use it to communicate with them.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
This adds ability to migrate vlan interfaces into namespaces
by specifying them in a config
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Update the man pages regarding the modifications around the
configuration option, volatile containers and new configuration
file format.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Patch moves etc/* contents into doc/examples/ and adds
--disable-examples configure switch which may be used not to install
examples. Default is to install them into ${docdir}/examples (commonly:
/usr/share/doc/lxc/examples)
Signed-off-by: Andrian Nord <NightNord@gmail.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
I changed the code to have lxc version to reflect the
string set in AC_INIT of configure.ac
rather than to report only the 3 first digits
update: use PACKAGE_VERSION in place of VERSION
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Ship the manpages in the source tarball made by 'make dist', and clean
them up only during the 'make maintainer-clean' step. This allows
distributions not to depend on docbook at lxc build time, because the
manpages are already there.
Also update the configure warning message to sound less scary.
Signed-off-by: Guido Trotter <ultrotter@quaqua.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
This patch makes lxc to detect a specific cgroup dedicated to lxc
which is mounted with the lxc name. That allows to mount different
cgroup in different places with different options (aka subsystems)
and assign one to be used by lxc. If no such mount point is found,
the first cgroup mount point is used.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Point users in documentation to also enable POSIX capability for
dropping CAP_BOOT.
Signed-off-by: Filippo Giunchedi <filippo@esaurito.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
These options appear in 2.6.29 in different locations, update the sgml
accordingly
Signed-off-by: Filippo Giunchedi <filippo@esaurito.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
I think this explanation is better.
Signed-off-by: Christophe Quintard <christophe.quintard@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
this is the man page update following the
previous git commit 7cbfc4e441
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Don't clean up the sgml which are generated by configure, otherwise
at the next make, the documentation generation will complain about
missing files.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
If needed the container can be launched in background
with a specific option -d.
That will make mute the container, the logs can help
to check what went wrong.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
the common options of lxc commands
are now described in one file "common_options.sgml.in"
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
the common references to lxc man pages
are now placed in one file "see_also.sgml.in"
Note that the few man pages that refer to man
pages that are not lxc ones have two "See Also" paragraph.
Signed-off-by: Michel Normand <normand@fr.ibm.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
When no tty number is specified in the command line,
let the tty service to provide choose one available
tty and provide this one.
The documentation is updated wrt this modification and
I did a little fix to generate the date of the documentation.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
From: Daniel Lezcano <dlezcano@fr.ibm.com>
Update the man page with the new devpts instance option.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
From: Michel Normand <michel.mno@free.fr>
I do not understand the purpose of this file in the doc/ subdir
seems to be useless.
Signed-off-by: Michel Normand <michel.mno@free.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
From: Michel Normand <michel.mno@free.fr>
Add FAQ to the dist tarball.
Signed-off-by: Michel Normand <michel.mno@free.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
From: Michel Normand <michel_mno@laposte.net>
Add more files to .cvsignore, especially the new created files.
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
From: Michel Normand <michel_mno@laposte.net>
Add an entry in the FAQ about libtool problem on Ubuntu 8.10
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
From: Michel Normand <michel_mno@laposte.net>
The FAQ file to be filled.
Signed-off-by: Michel Normand <michel_mno@laposte.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
From: Daniel Lezcano <dlezcano@fr.ibm.com>
Generate the man pages only if the docbook tool is available.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
From: Daniel Lezcano <dlezcano@fr.ibm.com>
Added the different man pages for the lxc commands. The generation of the
man pages relies on the docbook tool.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
