IFLA_BRIDGE_VLAN_INFO parsing logic will be used in link and vlan
processing code, so it makes sense to move it in the separate function.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
When I did the per-vlan stats iproute2 support, I left out a hunk from a
previous version of the patch that was using a special subcommand "stats".
Since the latest version uses the -s switch remove the help for the stats
subcommand.
Fixes: 7abf5de677 ("bridge: vlan: add support to display per-vlan statistics")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The non-json output prints 'None' for such vlans.
And this can garble json output.
Fixes: d82a49ce85 ("bridge: add json support for bridge vlan show")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Add the optional keyword "vid" to bridge vlan show so the user can
request filtering by a specific vlan id. Currently the filtering is
implemented only in user-space. The argument name has been chosen to
match the add/del one - "vid". This filtering can be used also with the
"-compressvlans" option to see in which range is a vlan (if in any).
Also this will be used to show only specific per-vlan statistics later
when support is added to the kernel for it.
Examples:
$ bridge vlan show vid 450
port vlan ids
eth2 450
$ bridge -c vlan show vid 450
port vlan ids
eth2 400-500
$ bridge vlan show vid 1
port vlan ids
eth1 1 PVID Egress Untagged
eth2 1 PVID
br0 1 PVID Egress Untagged
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
This patch replaces exits with returns in several
iproute2 commands. This fixes `ip -batch -force`
to not exit but continue on errors.
$cat c.txt
route del 1.2.3.0/24 dev eth0
route del 1.2.4.0/24 dev eth0
route del 1.2.5.0/24 dev eth0
route add 1.2.3.0/24 dev eth0
$ip -force -batch c.txt
RTNETLINK answers: No such process
Command failed c.txt:2
RTNETLINK answers: No such process
Command failed c.txt:3
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Michael Tautschnig wrote:
During a rebuild [...]. Please note that we use our research
compiler tool-chain (using tools from the cbmc package), which permits extended
reporting on type inconsistencies at link time.
[...]
gcc bridge.o fdb.o monitor.o link.o mdb.o vlan.o ../lib/libnetlink.a ../lib/libutil.a ../lib/libnetlink.a ../lib/libutil.a -o bridge
file link.c line 18: error: conflicting types for variable "filter_index"
old definition in module fdb file fdb.c line 29
signed int
new definition in module link file link.c line 18
unsigned int
<builtin>: recipe for target 'bridge' failed
make[3]: *** [bridge] Error 64
make[3]: Leaving directory '/srv/jenkins-slave/workspace/sid-goto-cc-iproute2/iproute2-3.14.0/bridge'
Makefile:45: recipe for target 'all' failed
While practical constraints may limit the value of filter_index to remain within
the bounds of a positive signed int, there is certainly no such guarantee here.
Also, a plain majority vote suggests that this really just a wrong declaration
in link.c as several declarations of filter_index as signed int exist.
[...]
My followup on this was:
I think the majority is wrong.
filter_index is assigned exclusively from if_nametoindex or ll_name_to_index
which both return unsigned int.
Changing it to unsigned everywhere seems better.
This has been minimally tested by using the bridge tool
to add vids and showing available vids on different devices.
Reported-by: Michael Tautschnig <mt@debian.org>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Recent kernel patches added support for VLAN filtering on the bridge.
This functionality allows one to turn a basic bridge into a VLAN bridge,
where VLANs dicatate packet forwarding and header transformation.
To configure the VLANs on the bridge and its ports a new command is
added to the 'bridge' utility.
# bridge vlan add dev eth0 vid 10 pvid untagged brdev
# bridge vlan add
# bridge vlan delete dev eth0 vid 10
# bridge vlan show
This command supports the following flags:
master - peform the operation on the software bridge device. This is
the default behavior.
self - perform the operation on the hardware associated with the port.
This flag is required when the device is the bridge device and
the configuration is desired on the bridge device itself (not
one of the ports).
pvid - Set the PVID (port vlan id) for a given port. Any untagged
frames arriving on the port will be assigned to this vlan.
untagged - Sets the egress policy of for a given vlan. Default port
egress policy is tagged. Set this flag if you wish traffic
associated with this VLAN to exit the port untagged.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
