This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
This patch:
- Adds a utility function for parsing a 64 bit address
- Adds a utility function for converting a 64 bit address to ASCII
- Adds and ILA encap type in lwt tunnels
Signed-off-by: Tom Herbert <tom@herbertland.com>
This patch follows the changes of commit 4d98ab0 ("Fix FSF address in
file headers"), fixing file headers added after it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
- Pull in the uapi mpls.h
- Update rtnetlink.h to include the mpls rtnetlink notification multicast group.
- Define AF_MPLS in utils.h if it is not defined from elsewhere
as is done with AF_DECnet
The address syntax for multiple mpls labels is a complete invention.
When I looked there seemed to be no wide spread convention for talking
about an mpls label stack in text for. Sometimes people did:
"{ Label1, Label2, Label3 }", sometimes people would do:
"[ label3, label2, label1 ]", and most of the time label
stacks were not explicitly shown at all.
The syntax I wound up using, so it would not have spaces and so it
would visually distinct from other kinds of addresses is.
label1/label2/label3 Where label1 is the label at the top of the label
stack and label3 is the label at the bottom on the label stack.
When there is a single label this matches what seems to be convention
with other tools. Just print out the numeric value of the mpls label.
The netlink protocol for labels uses the on the wire format for a
label stack. The ttl and traffic class are expected to be 0. Using
the on the wire format is common and what happens with other address
types. BGP when passing label stacks also uses this technique with the
exception that the ttl byte is not included making each label in a BGP
label stack 3 bytes instead of 4.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Added 'ip fou...' commands to enable/disable UDP ports for doing
foo-over-udp and Generic UDP Encapsulation variant. Arguments are port
number to bind to and IP protocol to map to port (for direct FOU).
Examples:
ip fou add port 7777 gue
ip fou add port 8888 ipproto 4
The first command creates a GUE port, the second creates a direct FOU
port for IPIP (receive payload is a assumed to be an IPv4 packet).
Signed-off-by: Tom Herbert <therbert@google.com>
ss -i can output "fastopen" attribute if socket used Fast Open
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch implements `bridge monitor mdb`.
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch implements:
bridge mdb { add | del } dev DEV port PORT grp GROUP
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
Example of the output:
$ ip monitor netconf&
[1] 24901
$ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
ipv6 dev lo forwarding off
ipv6 dev eth0 forwarding off
ipv6 all forwarding off
$ echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
ipv4 dev eth0 forwarding on
$ ip -6 netconf
ipv6 all forwarding on mc_forwarding 0
$ ip netconf show dev eth0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Minor cleanup of original patch, made sure netconf.h matched
result of santized kernel headers
ip tcp_metrics/tcpmetrics
We support get/del for single entry and dump for
show/flush.
v3:
- fix rtt/rttvar shifts as suggested by Eric Dumazet
- show rtt/rttvar usecs as suggested by David Laight
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Get the same info as from /proc file plus the peer inode.
Applies on top of new sock diag patch and udp diag patch.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Add the iproute2 support for the ACT_CSUM action. Can be used as
following, certainly in conjunction with the ACT_PEDIT action (pedit):
# In order to DNAT (stateless) IPv4 packet from 192.168.1.100 to
# 0x12345678 (18.52.86.120), and update the IPv4 header checksum and
# the UDP checksum (the last one, only if the packet is UDP).
tc filter add eth0 prio 1 protocol ip parent ffff: \
u32 match ip src 192.168.1.100/32 flowid :1 \
action pedit munge offset 16 u32 set 0x12345678 \
pipe csum ip and udp
# In order to alter destination address of IPv6 TCP packets from fc00::1
# and correct the TCP checksum (nothing happened? except maybe for
# checksums in the TCP payload ...).
tc filter add eth0 prio 1 protocol ipv6 parent ffff: \
u32 match ip6 src fc00::1/128 match ip6 protocol 0x06 0xff flowid :1 \
action pedit munge offset 24 u32 set 0x12345678 \
pipe csum tcp
We can use rxhash to classify the traffic into flows. As rxhash maybe
supplied by NIC or RPS, it is cheaper.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Provides ability to edit queue_mapping field
Provides ability to edit priority field
usage: action skbedit [queue_mapping QUEUE_MAPPING] [priority PRIORITY]
at least one option must be select, or both at the same time
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Introducing the function that does the ATM cell alignment, and
modifying tc_calc_rtable() to use this based upon a linklayer
parameter.
Modified from original to use constants from atm.h and
fix all the usages of rtable in same patch.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
commit 94e9cba778cb97d77d9146dc3bd38ff195bc2c8a
Author: Patrick McHardy <kaber@trash.net>
Date: Sat Feb 2 18:22:16 2008 +0100
[IPROUTE]: cls_flow: add vlan-tag support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
[IPROUTE]: Add flow classifier support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
