cheers,
jamal
[GENERAL] nl_mgrp to crap if base multicast groups exceeded
The old scheme of bitmasks works only for the first 32 groups.
Above that the setsockopt scheme must be used.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
cheers,
jamal
[ALL] update rest to use nl_mgrp
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Update kernel headers to be versions from 2.6.20.y
Solve cross compile build problems with x_tables and netfilter.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Hi,
This patch enables ip command to add IFA_F_HOMEADDRESS and
IFA_F_NODAD flags while adding the IPv6 address.
Signed-off-by: Noriaki TAKAMIYA<takamiya@po.ntts.co.jp>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
if a file fails to compile in a subdir of iproute2 fails (say "tunnel.c" in
the "ip" dir), the top level makefile does not abort:
all: Config
@for i in $(SUBDIRS); \
do $(MAKE) $(MFLAGS) -C $$i; done
the attached patch inserts a 'set -e' so that if the $(MAKE) fails, the all
target fails as well
-mike
When using tc to change netem attributes, only those values
on the command line should be passed down, others should
remain unchanged.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* "tc [class|qdisc|filter] get" doesn't exist, remove it from inline help.
* Add "replace" to "tc [class|filter] get" inline help.
* Fix "tc [class|qdisc|filter] help" output:
~$ tc class help
[snip]
Command "help" is unknown, try "tc class help".
~$
with my best wishes,
--
Hasso Tepper
Elion Enterprises Ltd. [AS3249]
Data Communication Network Administrator
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Stephen,
I will wait until you sync all these patches ive sent; then send a
couple more then i will be done.
cheers,
jamal
[XFRM] update xfrm monitoring to use nl_mgrp
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
[utils] make muticast group to bitmask conversion generic
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
[README] Mention need for db dev package
This has always been an annoyance for me whenever i moved to a new
machine. Just mention it in the readme hoping it will save someone
some cycles
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
[U32] Fix missing class/flowid oddity
When an action or policer is specified but not a classid/flowid, the
syntax accepts it but the kernel never really hits it.
This has been a long standing problem, but thanks to the persistence
of Marco Berizzi <pupilla@hotmail.com> I broke down and fixed it.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
a small one.
I have a few more but just run out of cycles for now;
if you dont mind holding before releasing for a short while so i can
get them out I will appreciate it.
cheers,
jamal
[DOC]: clarify "ok" and "pass"
A small fixup to elucidate the mysteries of accepting ..
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Ok, heres hopefully the last one in this series for generic netlink ..
cheers,
jamal
[GENL]: Add controller support for new features exposed
Update the controller to spit out the new features being exposed
from the kernel
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Stepehen,
Didnt hear back from you, please apply this one; needed for the next
patches.
cheers,
jamal
[GENL] Update generic netlink header
The header file needs to be uptodate with recent changes to allow
for forward compatibility
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
A small typo fixup
BTW, how do you like the subject to look like?
cheers,
jamal
[GENL] Multicast computation off by one
When using the first 32 groups, the multicast group to bit mapping
was off by one.
Signed-off-by: Jamal Hadi Salim
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
To support Mobile IPv6 RO, the following extension is included:
o Use XFRM_MODE_XXX macro instead of magic number
o New attribute option for all state: source address for
deleting or getting message
o New attribute options for RO: care-of address, last-used timestamp
and wild-receive flag
Note:
Flush command like `ip xfrm state flush` is to remove all XFRM state.
It has been effected for IPsec SAD but with this patch it flushes both
IPsec SAD and Mobile IPv6 RO states.
To make only IPsec SA flush, it is recommanded to specify each XFRM
protocol like below:
`ip x s f proto esp ; ip x s f proto ah ; ip x s f proto comp`
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Fix ip6tunnel.c to be fit with current ip command style.
Unlike other modules currently iptunnel (and ip6tunnel) is not
designed as protocol-independent because of unarranged structure
between IPv4 and IPv6.
Usage: ip -f inet6 tunnel { add | change | del | show } [ NAME ]
[ remote ADDR local ADDR ] [ dev PHYS_DEV ]
[ encaplimit ELIM ]
[ hoplimit HLIM ] [ tc TC ] [ fl FL ]
[ dscp inherit ]
Where: NAME := STRING
ADDR := IPV6_ADDRESS
ELIM := { none | 0..255 }(default=4)
HLIM := 0..255 (default=64)
TC := { 0x0..0xff | inherit }
FL := { 0x0..0xfffff | inherit }
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This file (ip6tunnel.c) is renamed from ipv6tunnel.c which is imported
from usagi cvs tree. It is originally ported by MIPL to work on their
2.4 kernel patch (MIPL1).
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Split common functions like ioctl to export them.
This is a preparation to support to configure IPv6-over-IPv6 tunnel.
This patch also includes minor improvemen:
o to stop to include unused headers
o to change function static if it is not needed to be exported
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Contributed man page from Michael Prokop <mika@grml.org>
Note: changed from lnstat.1 to lnstat.8 because that is
the section all the other iproute2 commands are in.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Patch which allows for setting SA and SP also for
new IPSec mode BEET, beside tunnel and transport, according to the latest
changes in the kernel you can find at the following link:
Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: Miika Komu <miika@iki.fi>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The current genl Makefile sticks -lm and -ldl into LDFLAGS ... however, this
does not create the proper link order as the implicit Makefile rules will
place LDFLAGS before object files
attached patch uses LDLIBS for -lm and -ldl and make's implicit rule will
place them in the proper location
also, i removed the -s argument to `install` as install does stripping
improperly in many scenarios (such as cross-compiling) ... and in general,
it's nice if the decision to strip is handled by the sysadmin
-mike
