Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Prevent a double space in "bridge mdb show" when the MDB entry is not
marked as "offload".
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add json output for bridge link show command and reuse code
from ip command to display interface information.
This also changes the output format slightly for the non JSON case so
that it has same format as the ip link show command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use new functions from json_print to simplify code.
Provide standard flag for colorizing output.
The shortened -c flag is ambiguous it could mean color or
compressvlan; it is now changed to mean color for consistency
with other iproute2 commands.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is at least three places implementing same things: two in
ipaddress.c print_linkinfo() & print_linkinfo_brief() and one in
bridge/link.c.
They are diverge from each other very little: bridge/link.c does not
support JSON output at the moment and print_linkinfo_brief() does not
handle IFLA_LINK_NETNS case.
Introduce and use print_name_and_link() routine to handle name@link
output in all possible variations; respect IFLA_LINK_NETNS attribute to
handle case when link is in different namespace; use ll_idx_n2a() for
interface name instead of "<nil>" to share logic with other code (e.g.
ll_name_to_index() and ll_index_to_name()) supporting such template.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Be consistent in handling of IFLA_IFNAME attribute in all places: if
there is no attribute report bug to stderr and use ll_idx_n2a() as
last measure to get name in "if%u" format instead of "<nil>".
Use check_ifname() to validate network device name: this catches both
unexpected return from kernel and ll_idx_n2a().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Any iproute utility that uses any function from lib/utils.c needs
to declare its own resolve_hosts variable instance although it does
not need/use hostname resolving functionality (currently only 'ip'
and 'ss' commands uses this).
The patch declares single common instance of resolve_hosts directly
in utils.c so the existing ones can be removed (the same approach
that is used for timestamp_short).
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
This config maps to IFLA_BRPORT_VLAN_TUNNEL bridge port netlink
flag attribute. This flag enables vlan to tunnel mapping on a bridge
port. It is off by default.
set vlan_tunnel attribute on bridge port vxlan0:
$ip link set dev vxlan0 type bridge_slave vlan_tunnel on
$ip link set dev vxlan0 type bridge_slave vlan_tunnel off
or via bridge command
$bridge link set dev vxlan0 vlan_tunnel on
$bridge link set dev vxlan0 vlan_tunnel off
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Kernel also reports vlans a port is member of, so print it. Since vlan
table can be quite large, dump it only when detailed information is
requested.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
IFLA_BRIDGE_VLAN_INFO parsing logic will be used in link and vlan
processing code, so it makes sense to move it in the separate function.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
neigh suppression can be used to suppress arp and nd flood
to bridge ports. It maps to the recently added
kernel support for bridge port flag IFLA_BRPORT_NEIGH_SUPPRESS.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This renames Config to config.mk and includes more Make input.
Now configure generates all the required CFLAGS and LDLIBS for
the optional libraries.
Also, use pkg-config to test for libelf, rather than using a test
program. This makes it consistent with other libraries.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The recent LIBMNL changes was made more difficult to debug because
of how Config is handle in clean make. The Config file is generated
by top level make, but since it is not recursive, the values generated
would not be visible on a clean make.
The change is to not include Config in top level make, and move
all the conditionals down into sub makefiles. Not ideal, but beter
than going full autoconf route. Or forcing separate configure
step.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Distinguish between externally learned vs offloaded FDBs. This is done
in order to indicate that FDBs added by software was successfully
offloaded.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
This patch adds a new argument to the bridge fdb show command that allows
to filter by entry state.
Also update the man page to include all available show arguments.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Recently a new per-port flag was added which controls the flooding of
unknown multicast, this patch adds support for controlling it via iproute2.
It also updates the man pages with information about the new flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
When I did the per-vlan stats iproute2 support, I left out a hunk from a
previous version of the patch that was using a special subcommand "stats".
Since the latest version uses the -s switch remove the help for the stats
subcommand.
Fixes: 7abf5de677 ("bridge: vlan: add support to display per-vlan statistics")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
json objects were started but not completed if the fdb vlan did not
match the specified filter vlan.
Sample output:
$ bridge -j fdb show vlan 111
[{
"mac": "44:38:39:00:69:88",
"dev": "br0",
"vlan": 111,
"master": "br0",
"state": "permanent"
}
]
$ bridge -j fdb show vlan 100
[]
$
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The non-json output prints 'None' for such vlans.
And this can garble json output.
Fixes: d82a49ce85 ("bridge: add json support for bridge vlan show")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
This patch was generated by the following semantic patch (a trimmed down
version of what is shipped with Linux sources):
@@
type T;
T[] E;
@@
(
- (sizeof(E)/sizeof(*E))
+ ARRAY_SIZE(E)
|
- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)
|
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
)
The only manual adjustment was to include utils.h in misc/nstat.c to make
the macro known there.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Similar to the Linux kernel and perf add infrastructure to reduce the
amount of output tossed to a user during a build. Full build output
can be obtained with 'make V=1'
Builds go from:
make[1]: Leaving directory `/home/dsa/iproute2.git/lib'
make[1]: Entering directory `/home/dsa/iproute2.git/ip'
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ip.o ip.c
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ipaddress.o ipaddress.c
to:
...
AR libutil.a
ip
CC ip.o
CC ipaddress.o
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add the optional keyword "vid" to bridge vlan show so the user can
request filtering by a specific vlan id. Currently the filtering is
implemented only in user-space. The argument name has been chosen to
match the add/del one - "vid". This filtering can be used also with the
"-compressvlans" option to see in which range is a vlan (if in any).
Also this will be used to show only specific per-vlan statistics later
when support is added to the kernel for it.
Examples:
$ bridge vlan show vid 450
port vlan ids
eth2 450
$ bridge -c vlan show vid 450
port vlan ids
eth2 400-500
$ bridge vlan show vid 1
port vlan ids
eth1 1 PVID Egress Untagged
eth2 1 PVID
br0 1 PVID Egress Untagged
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add the optional keyword "vid" to bridge mdb show so the user can
request filtering by a specific vlan id. Currently the filtering is
implemented only in user-space. The argument name has been chosen to match
the add/del one - "vid".
Example:
$ bridge mdb show vid 200
dev br0 port eth2 grp 239.0.0.1 permanent vid 200
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add the optional keyword "vlan" to bridge fdb show so the user can request
filtering by a specific vlan id. Currently the filtering is implemented
only in user-space. The argument name has been chosen to match the
add/del one - "vlan".
Example:
$ bridge fdb show vlan 400
52:54:00:bf:57:16 dev eth2 vlan 400 master br0 permanent
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
