Remove duplicate sub help messages for "dev" object and have them all
show help message for "dev".
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Have one help message for all dpipe commands, as it is done for the rest
of the devlink object. Possible and required options to the help.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To be consistent with the rest of the code and name of netlink
attribute, rename the dpipe_counters_enable struct fielt
to dpipe_counters_enabled.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To be consistent with netlink attribute name and also with the
"dpipe table show" output, add "counters_enabled" for "counters" in
"dpipe table set" command.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DEVLINK_ATTR_ESWITCH_ENCAP_MODE netlink attribute carries enum. But the
code assumes bool value. Fix this by treating the encap mode in the same
way as other eswitch mode attributes, switching from "enable"/"disable"
to "basic"/"none", according to the enum. Maintain the backward
compatibility to allow user to pass "enable"/"disable" too. Also to be
in-sync with the rest of the "mode" commands, rename to "encap-mode".
Adjust the help and man page accordingly.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix the help and man page of "devlink health set" command to be aligned
with the rest of helps and man pages.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Change the code that is doing custom processing of boolean command line
options to use dl_argv_bool(). Extend strtobool() to accept
"enable"/"disable" to maintain current behavior.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add ability to associate a policer with a trap group. The policer can be
unbound by using the 'nopolicer' keyword. In which case, the value
encoded in the 'DEVLINK_ATTR_TRAP_POLICER_ID' attribute will be '0'.
This is consistent with ip-link 'nomaster' keyword and the 'IFLA_MASTER'
attribute.
Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops policer 2
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"policer": 2
} ]
}
}
# devlink trap group set netdevsim/netdevsim10 group l3_drops nopolicer
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap policer set command allows the user to set the parameters of
the packet trap policer, such as rate and burst size. Example:
# devlink trap policer set netdevsim/netdevsim10 policer 1 rate 1000 burst 32
The trap policer show command allows the user to get the current
parameters of an individual policer or a dump of all policers in case
one is not specified. When '-s' is specified the policer's statistics
are shown. Example:
# devlink -jps trap policer show netdevsim/netdevsim10 policer 1
{
"trap_policer": {
"netdevsim/netdevsim10": [ {
"policer": 1,
"rate": 1000,
"burst": 32,
"stats": {
"rx": {
"dropped": 53
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently PCI PF and VF devlink devices register their ports as
physical port in non-representors mode.
Introduce a new port flavour as virtual so that virtual devices can
register 'virtual' flavour to make it more clear to users.
An example of one PCI PF and 2 PCI virtual functions, each having
one devlink port.
$ devlink port show
pci/0000:06:00.0/1: type eth netdev ens2f0 flavour physical port 0
pci/0000:06:00.2/1: type eth netdev ens2f2 flavour virtual port 0
pci/0000:06:00.3/1: type eth netdev ens2f3 flavour virtual port 0
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Flow action cookie has been recently added to kernel, print it out.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for devlink health error recovery status monitoring.
Update devlink-monitor man page accordingly.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Warning seen on Ubuntu
devlink.c: In function ‘cmd_dev_flash’:
devlink.c:3071:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
3071 | write(pipe_w, &err, sizeof(err));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 9b13cddfe2 ("devlink: implement flash status monitoring")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_out_bool() and pr_out_uint() with direct calls
to common json_print library function print_bool() and print_uint().
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_bool/uint/uint64_value with direct calls for the
matching common json_print library function: print_bool(), print_uint()
and print_u64()
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_out_str() and pr_out_str_value() with direct calls to
common json_print library functions.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Substitute json prints to use json_print.c common library functions,
instead of directly calling jsonw_functions.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a new attribute representing a new time-stamp format: current
time in ns (to comply with y2038) instead of jiffies. If the new
attribute was received, translate the time-stamp accordingly (ns).
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add pr_out_dump_reporter prefix to the helper function's name and
encapsulate the print in it.
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
devlink sb occupancy show requires device or port handle.
It passes both device and port handle bits as required to
dl_argv_parse() so since commit 1896b100af ("devlink: catch
missing strings in dl_args_required") devlink will now
complain that only one is present:
$ devlink sb occupancy show pci/0000:06:00.0/0
BUG: unknown argument required but not found
Drop the bit for the handle which was not found from required.
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Fixes: 1896b100af ("devlink: catch missing strings in dl_args_required")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Tested-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Resource size is a 64 bit attribute at netlink level.
Make the command line argument 64 bit as well.
Fixes: 8cd6440958 ("devlink: Add support for devlink resource abstraction")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently if dl_args_required doesn't contain a string
for a given option the fact that the option is missing
is silently ignored.
Add a catch-all case and print a generic error.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
netns parameter for devlink reload is supposed to take PID
as well as string name. However, the PID parsing has two
bugs:
- the opts->netns member is unsigned so the < 0
condition is always false;
- the parameter list is not rewinded after parsing as
a name, so parsing as a pid uses the wrong argument.
Fixes: 08e8e1ca3e ("devlink: extend reload command to add support for network namespace change")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
If devlink resource set parameters are not provided it crashes:
$ devlink resource set netdevsim/netdevsim0
Segmentation fault (core dumped)
This is because even though DL_OPT_RESOURCE_PATH and
DL_OPT_RESOURCE_SIZE are passed as o_required, the validation
table doesn't contain a relevant string.
Fixes: 8cd6440958 ("devlink: Add support for devlink resource abstraction")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In devlink health show command the reporter's name parameter is called
reporter, but in the output the reporter's name is referred to as name
Before this patch:
$ devlink health show pci/0000:04:00.0 reporter tx
pci/0000:04:00.0:
name tx
state healthy error 0 recover 0 grace_period 500 auto_recover true
After this patch:
$ devlink health show pci/0000:04:00.0 reporter tx
pci/0000:04:00.0:
reporter tx
state healthy error 0 recover 0 grace_period 500 auto_recover true
Reported-by: Jiri Pirko <jiri@mellanox.com>
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a helper function which wraps code that adds a left hand side
space separator unless it follows a newline.
Fixes: e3d0f0c0e3 ("devlink: add option to generate JSON output")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend existing devlink reload command by adding option "netns" by which
user can instruct kernel to reload the devlink instance into specified
network namespace.
Example:
$ ip netns add testns1
$ devlink dev reload netdevsim/netdevsim10 netns testns1
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Similar to ip tool, add an option to devlink to operate under certain
network namespace. Unfortunately, "-n" is already taken, so use "-N"
instead.
Example:
$ devlink -N testns1 dev show
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Listen to status notifications coming from kernel during flashing and
put them on stdout to inform user about the status.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel sends notifications about flash update status, so implement these
messages for monitoring.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The 'fw_load_policy' devlink parameter now supports an unknown value.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new devlink parameter along with string to uint
conversion.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
devlink segfaults when using grace_period without reporter
$ devlink health set pci/0000:00:09.0 grace_period 3500
Segmentation fault
devlink is instead supposed to gracefully fail printing a warning
message
$ devlink health set pci/0000:00:09.0 grace_period 3500
Reporter's name is expected.
This happens because DL_OPT_HEALTH_REPORTER_NAME and
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD are both defined as BIT(27).
When dl_opts_put() parse options and grace_period is set, it erroneously
tries to set reporter name to null.
This is fixed simply shifting by 1 bit enumeration starting with
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD.
Fixes: b18d89195b ("devlink: Add devlink health set command")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These commands are similar to the trap set and show commands, but
operate on a trap group and not individual traps. Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops action trap
# devlink -jps trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"stats": {
"rx": {
"bytes": 0,
"packets": 0
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap set command allows the user to set the action of an individual
trap. Example:
# devlink trap set netdevsim/netdevsim10 trap blackhole_route action trap
The trap show command allows the user to get the current status of an
individual trap or a dump of all traps in case one is not specified.
When '-s' is specified the trap's statistics are shown. When '-v' is
specified the metadata types the trap can provide are shown. Example:
# devlink -jvps trap show netdevsim/netdevsim10 trap blackhole_route
{
"trap": {
"netdevsim/netdevsim10": [ {
"name": "blackhole_route",
"type": "drop",
"generic": true,
"action": "trap",
"group": "l3_drops",
"metadata": [ "input_port" ],
"stats": {
"rx": {
"bytes": 0,
"packets": 0
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently, the number of supported options is capped at 32 which is a
problem given we are about to add a few more and go over the limit.
Increase the limit to 64 options.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Loose the "q" from the names and name the structure fields in the same
way rest of the code does. Also, fix list_add arg order which leads
to segfault.
Fixes: 33267017fa ("iproute2: devlink: port from sys/queue.h to list.h")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sys/queue.h does not exist on linux-musl targets and fails build as:
devlink.c:28:10: fatal error: sys/queue.h: No such file or directory
28 | #include <sys/queue.h>
| ^~~~~~~~~~~~~
The change ports to list.h API and drops dependency of 'sys/queue.h'.
The API maps one-to-one.
Build-tested on linux-musl and linux-glibc.
Bug: https://bugs.gentoo.org/690486
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: netdev@vger.kernel.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Keep pr_out_binary_value function only for printing. Inner relations
like array grouping should be done outside the function.
Fixes: 844a61764c ("devlink: Add helper functions for name and value separately")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
