Add protocol, table id and device to dump request if set in filter. If
kernel side filtering is supported it is used to reduce the amount of
data sent to userspace.
Older kernels do not parse attributes on a route dump request, so these
are silently ignored and ip will do the filtering in userspace.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter option to rtnl_routedump_req and use it to set rtm_flags
removing the need for rtnl_rtcache_request for dump requests.
Signed-off-by: David Ahern <dsahern@gmail.com>
DECnet belongs in the history museum of dead protocols along
with Appletalk and IPX.
Linux support has outlived its natural life and the time has
come to remove it from iproute2. Dead code is a source
of bugs and exploits.
If anyone actually has DECnet running on some old distribution
they can just keep to the old version of iproute2.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
The argument to print_0xhex is converted to unsigned long long
so the format string give for normal printout has to be some
variant of %llx. Otherwise, bogus values will be printed on
32 bit platforms.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
IPX has been depracted then removed from upstream kernels.
Drop support from ip route as well.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
It was possible to crash ip-route by adding an IPv6 route with 37
nexthop statements. A simple reproducer is:
| for i in `seq 37`; do
| nhs="nexthop via 1111::$i "$nhs
| done
| ip -6 route add 3333::/64 $nhs
The related code was broken in multiple ways:
* parse_one_nh() assumed that rta points to 4kB of storage but caller
provided just 1kB. Fixed by passing 'len' parameter with the correct
value.
* Error checking of rta_addattr*() calls in parse_one_nh() and called
functions was completely absent, so with above fix in place output
flood would occur due to parser looping forever.
While being at it, increase message buffer sizes to 4k. This allows for
at most 144 nexthops.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
RTA_CACHEINFO can be sent for non-cloned routes. If the attribute is
present print it. Allows route dumps to print expires times for example
which can exist on FIB entries.
Signed-off-by: David Ahern <dsahern@gmail.com>
rta_expires is a signed int; print it as one.
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Continue parsing a multipath payload as long as another nexthop can fit
in the payload.
# ip route add 192.0.2.0/24 nexthop dev dummy0 nexthop dev dummy1
Before:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
After:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
nexthop dev dummy1 weight 1
Fixes: f48e14880a ("iproute: refactor multipath print")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Attempt to add a multipath route where a nexthop definition refers to a
non-existent device causes 'ip' to crash and burn due to stack buffer
overflow:
# ip -6 route add fd00::1/64 nexthop dev fake1
Cannot find device "fake1"
Cannot find device "fake1"
Cannot find device "fake1"
...
Segmentation fault (core dumped)
Don't ignore errors from the helper routine that parses the nexthop
definition, and abort immediately if parsing fails.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
A problem was reported with parsing of prefixes all/any/default.
Commit 7696f1097f fixes the problem,
but there were also other pathces applied:
00b31a6b2e, which were intended to
fix the same problem. And they became redundant now. This patch
reverts changes introduced by those redundant patches.
Signed-off-by: Alexander Zubkov <green@msu.ru>
This reverts commit 9135c4d603.
Debian maintainer found that basic command:
# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Add JSON and color output formatting to ip route command.
Similar to existing address and link output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Minor refactoring to move flush into separate function to improve
readability and reduce depth of nesting.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix checkpatch complaints about assignment in conditions.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add whitespace around operators for consistency.
Use tabs for indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
For JSON and colorization, make common code a function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make printing of multipath attributes a function to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since these fields are printed in both route and multipath case;
avoid duplicating code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make a separate function to improve readability and enable
easier JSON conversion.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make common function for decoding cacheinfo.
This code may print more info than old version in some cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Refactor to reduce size of print_route and improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both next hop and route need to decode flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When running "ip route list default" and not specifying address family,
one will get all of the routes instead of just default only. The same
is for "exact default" and "match default".
It behaves in such a way because default route with unspecified family
has the same all-zeroes value like no prefix specified at all. Thus
following code blindly ignores the fact, that prefix was actually
specified.
This patch adds the flag PREFIXLEN_SPECIFIED to the default route too.
And then checks its value when filtering routes.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Metric is one of the "unique key" fields of the route in Linux. But
still one can not use its value in filter while running ip list.
Because of this writing checks in scripts for example is incovenient.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds fastopen_no_cookie option to enable/disable TCP fastopen
without a cookie on a per-route basis.
Support in Linux was added with 71c02379c762 (tcp: Configure TFO without
cookie per socket and/or per route).
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
This fixes a corner-case for routes with a certain metric locked to
zero:
| ip route add 192.168.7.0/24 dev eth0 window 0
| ip route add 192.168.7.0/24 dev eth0 window lock 0
Since the kernel doesn't dump the attribute if it is zero, both routes
added above would appear as if they were equal although they are not.
Fix this by taking mxlock value for the given metric into account before
skipping it if it is not present.
Reported-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Covscan complained about dead code but after reading it, I assume the
author's intention was to prefix the interface list with 'Oifs: '.
Initializing first to 1 and setting it to 0 after above prefix was
printed should fix it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch adds support for the seg6local lightweight tunnel
("ip route add ... encap seg6local ...").
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Since kernel commit 475abbf1ef67 ("ipv4: fib: Set offload indication
according to nexthop flags") offload indication is reported on a
per-nexthop basis.
Adjust iproute2 to display it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
This patch replaces exits with returns in ip route
commands.
Allows to continue when invoked with ip -batch.
Signed-off-by: Élie Bouttier <elie@bouttier.eu>
