It seems bad idea to depend on sysfs being mounted and reflected to the
current network namespace. Same applies to procfs.
Instead netlink should be used to talk to the kernel and get list of
specific network devices among with their parameters.
Support for kernel netlink message filtering by passing IFLA_INFO_KIND
in RTM_GETLINK request: if kernel does not support filtering by the kind
we will check it in reply anyway. Check for ifi->ifi_type to be either
ARPHRD_NONE or ARPHRD_ETHER to seed up things a bit without kernel level
filtering.
Unfortunately tun driver does not implement dumping it's configuration
via netlink and we still need to use read_prop() which depends on sysfs
to get additional tun device information.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both tunnels use legacy /proc/net/dev interface to get tunnel device and
it's statistics. This may cause problems for cases when procfs either
not mounted or not unshare(2)d for given network namespace.
Use netlink to walk through list of tunnel devices which is network
namespace aware and provides additional information such as statistics
in the dump message.
Since both address family specific variants of do_tunnels_list() nearly
the same, except for tunnel parameters structure initialization,
matching and printing we can introduce common one in tunnel.c.
To implement address family specific parts introduce new data structure
@struct tnl_print_nlmsg_info what contains all necessary information as
well as pointers to ->init(), ->match() and ->print() callbacks.
Annotate data structures by const where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use switch () instead of if () to compare tunnel type to fit into 80
columns and make code more readable. Print "\n" using fputc().
In iptunnel.c abstract tunnel parameters matching code in iptunnel.c
into ip_tunnel_parm_match() helper to conform with ip6tunnel.c. Use
memset() to initialize @p1.
In ip6tunnel.c no need to call ll_name_to_index() with name twice: just
use found previously index. Do not initialize @p1: this is done in
ip6_tnl_parm_init().
This is to show real differences between ip and ipv6 do_tunnels_list()
implementations and prepare for upcoming unification of them.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is first step to move tunnel code to use rtnl dump interface
instead of /proc/net/dev read.
Make tnl_print_stats() to accept @struct rtnl_link_stats64 parameter,
introduce tnl_get_stats() that will parse line from /proc/net/dev into
@struct rtnl_link_stats64.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Assume all statistics in ip(8) represented either by IFLA_STATS64 or
IFLA_STATS is 64 bit. It is clean that we can store __u32 counters of
@struct rtnl_link_stats in __u64 counters in @struct rtnl_link_stats64.
New get_rtnl_link_stats_rta() follows __print_link_stats() behaviour on
handling of stats attribute: copy no more than size of data structure
and no less than attribute length zeroing rest.
Drop print_link_stats32() as it's functionality can be handled by 64bit
variant. Move code from __print_link_stats() to print_link_stats64() and
finally rename print_link_stats64() to __print_link_stats().
More users of introduced function will come in future.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
To show real differences between these two variants adjust whitespace
intendation and use print_uint() instead of print_int() as all members
in both @struct rtnl_link_stats and @struct rtnl_link_stats64 are
unsigned.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger says:
====================
This patch set breaks up the big print_route function into
smaller pieces for readability and to make later changes
to support JSON and color output easier.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
For JSON and colorization, make common code a function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make printing of multipath attributes a function to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since these fields are printed in both route and multipath case;
avoid duplicating code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make a separate function to improve readability and enable
easier JSON conversion.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make common function for decoding cacheinfo.
This code may print more info than old version in some cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Refactor to reduce size of print_route and improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both next hop and route need to decode flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Spartan version of resource tracking documentation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds ss-similar interface to view various resource
tracked objects. At this stage, only QP is presented.
1. Get all QPs for the specific device:
$ rdma res show qp link mlx5_4
link mlx5_4/- lqpn 8 type UD state RESET sq-psn 0 pid 0 comm [ib_ipoib]
link mlx5_4/1 lqpn 7 type UD state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 1 type GSI state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 0 type SMI state RTS sq-psn 0 pid 0 comm [ib_core]
$ rdma res show qp link mlx5_4/
link mlx5_4/- lqpn 8 type UD state RESET sq-psn 0 pid 0 comm [ib_ipoib]
link mlx5_4/1 lqpn 7 type UD state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 1 type GSI state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 0 type SMI state RTS sq-psn 0 pid 0 comm [ib_core]
2. Provide illegal port number (0 is illegal):
$ rdma res show qp link mlx5_4/0
Wrong device name
3. Get QPs of specific port:
$ rdma res show qp link mlx5_4/1
link mlx5_4/1 lqpn 7 type UD state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 1 type GSI state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 0 type SMI state RTS sq-psn 0 pid 0 comm [ib_core]
4. Get QPs which have not assigned port yet:
link mlx5_4/- lqpn 8 type UD state RESET sq-psn 0 pid 0 comm [ib_ipoib]
5. Limit to specific Local QPNs:
$ rdma res show qp link mlx5_4/1 lqpn 1-3,7
link mlx5_4/1 lqpn 7 type UD state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 1 type GSI state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 0 type SMI state RTS sq-psn 0 pid 0 comm [ib_core]
. Filter types (strings):
$ rdma res show qp link mlx5_4/1 type UD,gSi
link mlx5_4/1 lqpn 7 type UD state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_4/1 lqpn 1 type GSI state RTS sq-psn 0 pid 0 comm [ib_core]
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The global resource summary information. The object names, current utilization
and maximum numbers are received as is from the kernel.
$ rdma res
1: mlx5_0: pd 3 cq 5 qp 4
2: mlx5_1: pd 3 cq 5 qp 4
3: mlx5_2: pd 3 cq 5 qp 4
4: mlx5_3: pd 2 cq 3 qp 2
5: mlx5_4: pd 3 cq 5 qp 4
$ rdma res show mlx5_4
5: mlx5_4: pd 3 cq 5 qp 44
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The dev and link execution callbacks expects that next
command line argument is device or port name.
Set pointer to device or port name position prior calls to
rd_exec_dev()/rd_exec_link().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds general infrastructure to RDMAtool to handle various
filtering options needed for the downstream resource tracking patches.
The infrastructure is generic and stores filters in list of key<->value
entries. There are three types of filters:
1. Numeric - the values are intended to be digits combined with '-' to
mark range and ',' to mark multiple entries, e.g. pid 1-100,234,400-401
is perfectly legit filter to limit process ids.
2. String - the values are consist from strings and "," as a denominator.
3. Link - special case to allow '/' in string to provide link name, e.g.
link mlx4_1/2.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
According to the IBTA spec [1], the physical connected port is provided
for the QP in RTR-to-INIT stage performed by modify_qp(). It causes
to do not have port number for newly created QPs.
The following patch adds "-" sign to present absence of port, because
QPs are going to be associated with rdmatool link object, which needs
port number as an index.
[1] InfiniBand Architecture Release 1.3 -
"Table 96 QP State Transition Properties"
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We have helper routines to support nested attribute addition into
netlink buffer: use them instead of open coding.
Use addattr_nest_compat()/addattr_nest_compat_end() where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
1) Rename @hdr parameter to @n to be coherent with rest of the parsing
code.
2) Use NLMSG_DATA() to get pointer to the data after nlmsghdr instead
of calculating it directly in ip/tunnel code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This reverts commit 63891c7013.
It seems print_linkinfo_brief() never accepts filter different than
default one and David Ahern suggests to revert it instead of making
new change that actually do revert.
Conflicts:
ip/ipaddress.c
ip/iplink.c
These are caused by JSON support addition after commit we reverting.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Non-JSON tc qdisc output used to print the "requeues" statistic
twice. Commit 4fcec7f366 ("tc: jsonify stats2") tried to preserve
this behaviour for both standard output and JSON, but used the wrong
statistic (q.qlen). Also duplicating keys in JSON is not allowed,
so the second occurrence should be completely skipped with JSON.
Fixes: 4fcec7f366 ("tc: jsonify stats2")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The JSON object name for statistics in ip link show is "stats644".
Looks like a typo, commit d0e720111a ("ip: ipaddress.c: add support
for json output") contains an example with the expected "stats64" name.
The fact that no one has noticed until now is probably an indication
that no one is using this object. Hopefully it's not too late to fix
this, although IIUC this has already been in 4.13 and 4.14 releases :S
Fixes: d0e720111a ("ip: ipaddress.c: add support for json output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make JSON output work with prio Qdiscs. This will also make
other qdiscs which reuse the print_qopt work, like mqprio or
pfifo_fast.
Note that there is a double space between "priomap" and first
prio number. Keep this original behaviour.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make JSON output work with RED Qdiscs. Float/double printing
helpers have to be added/uncommented to print the probability.
Since TC stats in general are not split out to a separate object
the xstats printed by this patch are not separated either.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych says:
====================
Now we enhance get_addr() to return additional information about address
(e.g. if it unspecified or multicast) we want to have same functionality
for attributes in netlink message.
Introduce and use get_addr_rta() that parses given netlink attribute
into @inet_prefix data structure in the same way similar get_addr()
parses address from it's string representation.
Use attribute length to guess address family: force it by giving non
AF_UNSPEC @family to get_addr_rta() to ensure address is of expected
family.
Introduce and use inet_addr_match_rta() to further simplify and unify
code where get_addr_rta() intended to be used together with
inet_addr_match().
This is next step in ipv4 and ipv6 modules unification to prepare for
merge in the future.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce and use tnl_print_endpoint() helper to print of tunnel
endpoint address.
Note that for AF_INET and AF_INET6 inet_ntop(3) is used that may return
NULL in case of failure and while unlikely format_host_rta() might
return NULL too. Handle this case when passing local/remote to
print_string().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there remove & from inet_prefix.data when since it is array.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
First is used to get address from netlink attribute to
inet_prefix data structure. Use memcpy() with constant
value to let complier optimize by replacing a call by
inlining load/store instructions.
Second is used to match address in given netlink attribute
with one given as reference. It matches successfully if
no attribute is given (@rta is NULL), reference address
family is AF_UNSPEC or it's length isn't given; fails if
get_attr_rta() can't get attribute or it's family does
not match reference; calls inet_addr_match() to get final
verdict.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych says:
====================
With this series I want to unify collect metadata
handling in tunnels:
1) Use "external" name for JSON and non-JSON output.
Do not *print* any options when tunnel in
collect metadata mode: gre6 already do
this, so just apply to others.
2) Do not *add* any attributes when configuring
gre tunnel in collect metadata mode.
Other tunnels (e.g. gre6, iptnl, ip6tnl)
alredy do that.
This is next step in ipv4 and ipv6 modules
unification to prepare for merge in the future.
Any comments, suggestions and criticism as always
welcome.
v2
For all tunnels implementing collect metadata
use "external" keyword for both JSON. Thanks
to Jiri Benc for detailed explanation.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
