* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Enhance IP tunnel parameters by adding destination UDP port.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Support matching on ICMP type and code.
Example usage:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 ip_proto icmp type 8 code 0 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 ip_proto icmpv6 type 128 code 0 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Introduce enum flower_endpoint and use it instead of a bool
as the type for paramatising source and destination.
This is intended to improve read-ability and provide some type
checking of endpoint parameters.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Make use of flower_port_attr_type() safe:
* flower_port_attr_type() may return a valid index into tb[] or -1.
Only access tb[] in the case of the former.
* Do not access null entries in tb[]
Also make usage silent - it is valid for ip_proto to be invalid,
for example if it is not specified as part of the filter.
Fixes: a1fb0d4842 ("tc: flower: Support matching on SCTP ports")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0':
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action mirred egress redirect dev vnet0
Signed-off-by: Amir Vadai <amir@vadai.me>
Support matching on SCTP ports in the same way that matching
on TCP and UDP ports is already supported.
Example usage:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 ip_proto sctp dst_port 80 \
action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Remove left over usage from removal of eth_type argument.
Fixes: 488b41d020 ('tc: flower no need to specify the ethertype')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Classification according to vlan id and vlan priority.
Example script that adds vlan filter:
# add ingress qdisc
tc qdisc add dev ens4f0 ingress
# add a flower filter with vlan id and priority classification
tc filter add dev ens4f0 protocol 802.1Q parent ffff: \
flower \
indev ens4f0 \
vlan_ethtype ipv4 \
vlan_id 100 \
vlan_prio 3 \
action vlan pop
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
On devices that support TC flower offloads, these flags enable a filter to be
added only to HW or only to SW. skip_sw and skip_hw are mutually exclusive
flags. By default without any flags, the filter is added to both HW and SW,
but no error checks are done in case of failure to add to HW.
With skip-sw, failure to add to HW is treated as an error.
Here is a sample script that adds 2 filters, one with skip_sw and the other
with skip_hw flag.
# add ingress qdisc
tc qdisc add dev enp0s9 ingress
# enable hw tc offload.
ethtool -K enp0s9 hw-tc-offload on
# add a flower filter with skip-sw flag.
tc filter add dev enp0s9 protocol ip parent ffff: flower \
ip_proto 1 indev enp0s9 skip_sw \
action drop
# add a flower filter with skip-hw flag.
tc filter add dev enp0s9 protocol ip parent ffff: flower \
ip_proto 3 indev enp0s9 skip_hw \
action drop
Signed-off-by: Amir Vadai <amirva@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
since all tc classifiers are required to specify ethertype as part of grammar
By not allowing eth_type to be specified we remove contradiction for
example when a user specifies:
tc filter add ... priority xxx protocol ip flower eth_type ipv6
This patch removes that contradiction
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This fixes a few syntax errors and changes route filter help text to use
classid instead of flowid to be consistent with other filters' help
texts.
Signed-off-by: Phil Sutter <phil@nwl.cc>
