The Linux DCBX object is a 1-byte bitfield of flags that configure whether
the DCBX protocol is implemented in the device or in the host, and which
version of the protocol should be used. Add a tool to access the per-port
Linux DCBX object.
For example:
# dcb dcbx set dev eni1np1 host ieee
# dcb dcbx show dev eni1np1
host ieee
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
DCB APP interfaces are standardized in 802.1q-2018, and allow configuration
of traffic prioritization rules based on several possible headers.
Add a dcb subtool for maintenance and display of the APP table. For
example:
# dcb app add dev eni1np1 dscp-prio 0:0 CS3:3 CS6:6
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS6:6
# dcb app add dev eni1np1 dscp-prio CS3:4
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS3:4 CS6:6
# dcb app replace dev eni1np1 dscp-prio CS3:5
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:5 CS6:6
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Some DSCP values can be translated to symbolic names. That may not be
always desirable. Introduce a command-line option similar to other tools,
-N or --Numeric, to suppress this translation.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This to keep compatible with the major tools, ip and tc. Also
document the option in the man page, which was neglected.
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch allows the user to set and retrieve the
IFLA_MACVLAN_BC_QUEUE_LEN parameter via the bcqueuelen
command line argument
This parameter controls the requested size of the queue for
broadcast and multicast packages in the macvlan driver.
If not specified, the driver default (1000) will be used.
Note: The request is per macvlan but the actually used queue
length per port is the maximum of any request to any macvlan
connected to the same port.
For this reason, the used queue length IFLA_MACVLAN_BC_QUEUE_LEN_USED
is also retrieved and displayed in order to aid in the understanding
of the setting. However, it can of course not be directly set.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
add man page for tc-ct, but it brings with it a bogus block of text
in the benning of tc-flower man page.
This commit simply removes it.
Fixes: 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DCBNL maxrate interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of rate with which traffic in a given traffic class is
sent.
Add a dcb subtool to allow showing and tweaking of this per-TC maximum
rate. For example:
# dcb maxrate show dev eni1np1
tc-maxrate 0:25Gbit 1:25Gbit 2:25Gbit 3:25Gbit 4:25Gbit 5:25Gbit 6:100Gbit 7:25Gbit
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
DCBNL buffer interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of port headroom buffers.
Add a dcb subtool to allow showing and tweaking of buffer priority mapping
and buffer sizes. For example:
# dcb buf show dev eni1np1
prio-buffer 0:0 1:0 2:0 3:3 4:0 5:0 6:6 7:0
buffer-size 0:10000 1:0 2:0 3:70000 4:0 5:0 6:10000 7:0
total-size 221072
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow switching "dcb" into the ISO/IEC mode of units by passing -i.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow selective display of statistical counters by passing -s.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
None, one, or many parameters can be given on the command line, but
the current synopsis allows only none or one. Fix it.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add reload action and reload limit to devlink reload command to enable
the user to select the reload action required and constrains limits on
these actions that he may want to ensure.
The following reload actions are supported:
driver_reinit: driver entities re-initialization, applying
devlink-param and devlink-resource values.
fw_activate: firmware activate.
The uAPI is backward compatible, if the reload action option is omitted
from the reload command, the driver reinit action will be used.
Note that when required to do firmware activation some drivers may need
to reload the driver. On the other hand some drivers may need to reset
the firmware to reinitialize the driver entities. Therefore, the devlink
reload command returns the actions which were actually performed.
By default reload actions are not limited and driver implementation may
include reset or downtime as needed to perform the actions. However, if
reload limit is selected, the driver should perform only if it can do it
while keeping the limit constraints.
Reload limit added:
no_reset: No reset allowed, no down time allowed, no link flap and no
configuration is lost.
Command examples:
$devlink dev reload pci/0000:82:00.0 action driver_reinit
reload_actions_performed:
driver_reinit
$devlink dev reload pci/0000:82:00.0 action fw_activate
reload_actions_performed:
driver_reinit fw_activate
devlink dev reload pci/0000:82:00.1 action driver_reinit -jp
{
"reload": {
"reload_actions_performed": [ "driver_reinit" ]
}
}
devlink dev reload pci/0000:82:00.0 action fw_activate -jp
{
"reload": {
"reload_actions_performed": [ "driver_reinit","fw_activate" ]
}
}
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement support for action terse dump using new TCA_ACT_FLAG_TERSE_DUMP
value of TCA_ROOT_FLAGS tlv. Set the flag when user requested it with
following example CLI (-br for 'brief'):
$ tc -s -br actions ls action tunnel_key
total acts 2
action order 0: tunnel_key index 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
action order 1: tunnel_key index 2
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
action (kind, index) and stats, if requested by the user.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Extend the 'bridge mdb' command for the following syntax:
bridge mdb add dev br0 port swp0 grp 01:02:03:04:05:06 permanent
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The Linux DCB interface allows configuration of a broad range of
hardware-specific attributes, such as TC scheduling, flow control, per-port
buffer configuration, TC rate, etc. Add a new tool to show that
configuration and tweak it.
DCB allows configuration of several objects, and possibly could expand to
pre-standard CEE interfaces. Therefore the tool itself is a lean shell that
dispatches to subtools each dedicated to one of the objects.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Manpage:
* Remove the extra "and to ip packets" part from command description
to make it more understandable.
* Redirect packets to eth1, instead of eth0, as told in the
description.
Help string:
* "mpls pop" can be followed by a CONTROL keyword.
* "mpls modify" can also set the MPLS_BOS field.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement support for classifier/action terse dump using new TCA_DUMP_FLAGS
tlv with only available flag value TCA_DUMP_FLAGS_TERSE. Set the flag when
user requested it with following example CLI (-br for 'brief'):
$ tc -s -br filter show dev ens1f0 ingress
filter protocol ip pref 49151 flower chain 0
filter protocol ip pref 49151 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter protocol ip pref 49152 flower chain 0
filter protocol ip pref 49152 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
filter and action (handle, cookie, etc.) and stats, if requested by the
user. The intention is to significantly improve rule dump rate by omitting
all static data that do not change after rule is created.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_MPLS_ACT_MAC_PUSH action (kernel commit
a45294af9e96 ("net/sched: act_mpls: Add action to push MPLS LSE before
Ethernet header")). This action let TC push an MPLS header before the
MAC header of a frame.
Example (encapsulate all outgoing frames with label 20, then add an
outer Ethernet header):
# tc filter add dev ethX matchall \
action mpls mac_push label 20 ttl 64 \
action vlan push_eth dst_mac 0a:00:00:00:00:02 \
src_mac 0a:00:00:00:00:01
This patch also adds an alias for ETH_P_TEB, since it is useful when
decapsulating MPLS packets that contain an Ethernet frame.
With MAC_PUSH, there's no previous Ethertype to modify. However, the
"protocol" option is still needed, because the kernel uses it to set
skb->protocol. So rename can_modify_ethtype() to can_set_ethtype().
Also add a test suite for m_mpls, which covers the new action and the
pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH
actions (kernel commit 19fbcb36a39e ("net/sched: act_vlan:
Add {POP,PUSH}_ETH actions"). These action let TC remove or add the
Ethernet at the head of a frame.
Drop an Ethernet header:
# tc filter add dev ethX matchall action vlan pop_eth
Push an Ethernet header (the original frame must have no MAC header):
# tc filter add dev ethX matchall action vlan \
push_eth dst_mac 0a:00:00:00:00:02 src_mac 0a:00:00:00:00:01
Also add a test suite for m_vlan, which covers these new actions and
the pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds the user-space control and dump of mdb entry source
address. When setting the new MDBA_SET_ENTRY_ATTRS nested attribute is
used and inside is added MDBE_ATTR_SOURCE based on the address family.
When dumping we look for MDBA_MDB_EATTR_SOURCE and if present we add the
"src x.x.x.x" output. The source address will be always shown as it's
needed to match the entry to modify it from user-space.
Example:
$ bridge mdb add dev bridge port ens13 grp 239.0.0.1 src 1.2.3.4 permanent vid 100
$ bridge mdb show
dev bridge port ens13 grp 239.0.0.1 src 1.2.3.4 permanent vid 100
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The XFRMA_SET_MARK_MASK attribute can be set in states (4.19+)
It is optional and the kernel default is 0xffffffff
It is the mask of XFRMA_SET_MARK(a.k.a. XFRMA_OUTPUT_MARK in 4.18)
e.g.
./ip/ip xfrm state add output-mark 0x6 mask 0xab proto esp \
auth digest_null 0 enc cipher_null ''
ip xfrm state
src 0.0.0.0 dst 0.0.0.0
proto esp spi 0x00000000 reqid 0 mode transport
replay-window 0
output-mark 0x6/0xab
auth-trunc digest_null 0x30 0
enc ecb(cipher_null)
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
sel src 0.0.0.0/0 dst 0.0.0.0/0
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add health reporter test command and allow user to trigger a test event.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Added description of link flags allmulticast, promisc and trailers.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This commit adds support to expose the following inet socket options:
-- recverr
-- is_icsk
-- freebind
-- hdrincl
-- mc_loop
-- transparent
-- mc_all
-- nodefrag
-- bind_address_no_port
-- recverr_rfc4884
-- defer_connect
with the option --inet-sockopt. The individual option is only shown
when set.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for recently
added link IFLA_PROTO_DOWN_REASON attribute.
IFLA_PROTO_DOWN_REASON enumerates reasons
for the already existing IFLA_PROTO_DOWN link
attribute.
$ cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity
$ ip link set dev vx10 protodown on protodown_reason vrrp on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"proto_down_reason": [ "vrrp" ]
} ]
$ip link set dev vx10 protodown_reason mlag on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <mlag,vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"protodown_reason": [ "mlag","vrrp" ]
} ]
$ip -p -j link show dev vx10
$ip link set dev vx10 protodown off protodown_reason vrrp off
Error: Cannot clear protodown, active reasons.
$ip link set dev vx10 protodown off protodown_reason mlag off
$
Note: for somereason the json and non-json key for protodown
are different (protodown and proto_down). I have kept the
same for protodown reason for consistency (protodown_reason and
proto_down_reason).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
PRP support requires a proto parameter which is 0 for hsr and 1 for
prp. Default is hsr and is backward compatible.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Document the new supported criteria of auto mode. Examples:
$ rdma statistic qp set link mlx5_2/1 auto pid on
$ rdma statistic qp set link mlx5_2/1 auto pid,type on
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Ido Kalir <idok@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This flag allows to create SA where sequence number can cycle in
outbound packets if set.
Signed-off-by: Petr Vaněk <pv@excello.cz>
Signed-off-by: David Ahern <dsahern@kernel.org>
In most of cases a user wants to see only the dynamic mac addresses
in the fdb output. But currently the 'fdb show' displays tons of
various self entries, those only waste the output without any useful
goal.
New option 'dynamic' for 'show' and 'get' commands forces display
only relevant records.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To improve the usability better use case-insensitive pattern-matching
in ifstat, nstat and ss tools.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The XFRMA_IF_ID attribute is set in policies for them to be
associated with an XFRM interface (4.19+).
Add support for getting/deleting policies with this attribute.
For supporting 'deleteall' the XFRMA_IF_ID attribute needs to be
explicitly copied.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In commit aed63ae1ac ("ip xfrm: support setting/printing XFRMA_IF_ID attribute in states/policies")
I added the ability to set/print the xfrm interface ID without updating
the man page.
Fixes: aed63ae1ac ("ip xfrm: support setting/printing XFRMA_IF_ID attribute in states/policies")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When setting a policer to a trap group, a value of "0" will unbind the
currently bound policer from the group.
The behavior is intentional and tested in kernel selftests, so document
it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add the new "mpls" keyword that can be used to match MPLS fields in
arbitrary Label Stack Entries.
LSEs are introduced by the "lse" keyword and followed by LSE options:
"depth", "label", "tc", "bos" and "ttl". The depth is manadtory, the
other options are optionals.
For example, the following filter drops MPLS packets having two labels,
where the first label is 21 and has TTL 64 and the second label is 22:
$ tc filter add dev ethX ingress proto mpls_uc flower mpls \
lse depth 1 label 21 ttl 64 \
lse depth 2 label 22 bos 1 \
action drop
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Bareudp devices provide a generic L3 encapsulation for tunnelling
different protocols like MPLS, IP, NSH, etc. inside a UDP tunnel.
This patch is based on original work from Martin Varghese:
https://lore.kernel.org/netdev/1570532361-15163-1-git-send-email-martinvarghesenokia@gmail.com/
Examples:
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc
This creates a bareudp tunnel device which tunnels L3 traffic with
ethertype 0x8847 (unicast MPLS traffic). The destination port of the
UDP header will be set to 6635. The device will listen on UDP port 6635
to receive traffic.
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto
Same as the MPLS example, but for IPv4. The "multiproto" keyword allows
the device to also tunnel IPv6 traffic.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before can be possible show only all qeueue disciplines on an interface.
There wasn't a way to get the qdisc info by handle or parent, only full
dump of the disciplines with a following grep/sed usage.
Now new and old options work as expected to filter a qdisc by handle or
parent.
Full syntax of the qdisc show command:
tc qdisc { show | list } [ dev STRING ] [ QDISC_ID ] [ invisible ]
QDISC_ID := { root | ingress | handle QHANDLE | parent CLASSID }
This change doesn't require any changes in the kernel.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single font macro for a single argument.
Remove unnecessary quotes for a single-font macro.
Join two lines into one.
The output of "nroff" and "groff" is unchanged.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for one argument.
Remove unnecessary quotes for a single font macro.
Join some lines into one.
The output of "nroff" and "groff" is unchanged, except for a font
change in two lines.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
