Extend the 'bridge mdb' command for the following syntax:
bridge mdb add dev br0 port swp0 grp 01:02:03:04:05:06 permanent
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print the mdb entry's protocol (i.e. who added it) when it's available if
the user requested to show details (-d). Currently the only possible
values are RTPROT_STATIC (user-space added) or RTPROT_KERNEL
(automatically added by kernel). The value is kernel controlled.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print the mdb entry's source list when it's available if the user
requested to show details (-d). Each source has an associated timer
which controls if traffic should be forwarded to that S,G entry (if the
timer is non-zero traffic is forwarded, otherwise it's not).
Currently the source list is kernel controlled and can't be changed by
user-space.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print the mdb entry's filter mode when it's available if the user
requested to show details (-d). It can be either include or exclude.
Currently it's kernel controlled and can't be changed by user-space.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
With IGMPv3/MLDv2 support we have 2 new flags:
- added_by_star_ex: set when the S,G entry was automatically created
because of a *,G entry in EXCLUDE mode
- blocked: set when traffic for the S,G entry for that port has to be
blocked
Both flags are used only on the new S,G entries and are currently kernel
managed, i.e. similar to other flags which can't be set from user-space.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We're not showing the fast_leave flag when it's set. Currently that can
be only when an mdb entry is being deleted due to fast leave, so it will
only affect mdb monitor.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds the user-space control and dump of mdb entry source
address. When setting the new MDBA_SET_ENTRY_ATTRS nested attribute is
used and inside is added MDBE_ATTR_SOURCE based on the address family.
When dumping we look for MDBA_MDB_EATTR_SOURCE and if present we add the
"src x.x.x.x" output. The source address will be always shown as it's
needed to match the entry to modify it from user-space.
Example:
$ bridge mdb add dev bridge port ens13 grp 239.0.0.1 src 1.2.3.4 permanent vid 100
$ bridge mdb show
dev bridge port ens13 grp 239.0.0.1 src 1.2.3.4 permanent vid 100
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While I fixed the mdb json output, I did overlook the text output.
This patch returns the original text output format:
dev <bridge> port <port> grp <mcast group> <temp|permanent> <flags> <timer>
Example (old format, restored by this patch):
dev br0 port eth8 grp 239.1.1.11 temp
Example (changed format after the commit below):
23: br0 eth8 239.1.1.11 temp
We had some reports of failing scripts which were parsing the output.
Also the old format matches the bridge mdb command syntax which makes
it easier to build commands out of the output.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
The bridge mdb show is broken on current iproute2. e.g.
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp 34: br0 veth0_br 224.1.1.1 temp
After fix:
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp
34: br0 veth0_br 224.1.1.1 temp
v2: Use json print lib as Stephen suggested.
v3: No need to use is_json_context() as print_string() could handle both cases.
v4: use new function print_nl() to print new line in non-json mode.
Reported-by: Ying Xu <yinxu@redhat.com>
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rather than using is_json_context(), use the print_string functions
which handle both cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Use new functions from json_print to simplify code.
Provide standard flag for colorizing output.
The shortened -c flag is ambiguous it could mean color or
compressvlan; it is now changed to mean color for consistency
with other iproute2 commands.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Add the optional keyword "vid" to bridge mdb show so the user can
request filtering by a specific vlan id. Currently the filtering is
implemented only in user-space. The argument name has been chosen to match
the add/del one - "vid".
Example:
$ bridge mdb show vid 200
dev br0 port eth2 grp 239.0.0.1 permanent vid 200
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Recently a new temp router port mode was added and with it the dumped
information was extended similar to how mdb entries were done. This
patch adds support to dump the new information by using the "-s" switch.
Example:
$ bridge -d -s mdb show
dev br0 port eth1 grp ff02::1:ffbf:5716 temp 234.39
dev br0 port eth1 grp 239.0.0.2 temp 97.17
dev br0 port eth1 grp 239.0.0.3 temp 105.36
router ports on br0: eth1 0.00 permanent
router ports on br0: eth2 254.87 temp
It also updates the bridge man page.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Mark MDB entries which are offloaded to HW with "offload" flag
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Recently support was added to the kernel to be able to add more per-mdb
entry attributes via standard netlink attributes of type MDBA_MDB_EATTR_.
This patch adds support to iproute2 to parse and output these
attributes. The first exported attribute is the mdb "timer" value which
is shown only when the "-s" iproute2 arg is used.
Example:
$ bridge -s mdb show
dev br0 port eth1 grp 239.0.0.11 permanent 0.00
dev br0 port eth1 grp 239.0.0.10 temp 244.15
dev br0 port eth1 grp 239.0.0.1 temp 245.21
dev br0 port eth1 grp 239.0.0.5 temp 246.43
dev br0 port eth2 grp 239.0.0.5 temp 248.44
dev br0 port eth1 grp 239.0.0.2 temp 245.32
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds fflush in fdb and mdb print functions
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Before this patch both addmdb and delmdb events were printed the same,
now we'll get a "Deleted" string in front when delmdb is received.
Before:
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
^^ No way to differentiate between both events.
After:
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1
(monitor) Deleted dev br0 port eth3 grp 239.0.0.1 temp
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch allows the user to specify the vlan of the mdb group being
added or deleted and adds support for displaying the vlan when
dumping mdb information or monitoring it. It also updates the man page
to reflect the new "vid" argument for mdb.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds support for ADDMDB/DELMDB notifications about router ports
which have been added or deleted/expired respectively.
Example output:
$ bridge -s monitor mdb
Deleted router port dev eth3 master br0
router port dev eth3 master br0
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
This patch replaces exits with returns in several
iproute2 commands. This fixes `ip -batch -force`
to not exit but continue on errors.
$cat c.txt
route del 1.2.3.0/24 dev eth0
route del 1.2.4.0/24 dev eth0
route del 1.2.5.0/24 dev eth0
route add 1.2.3.0/24 dev eth0
$ip -force -batch c.txt
RTNETLINK answers: No such process
Command failed c.txt:2
RTNETLINK answers: No such process
Command failed c.txt:3
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Michael Tautschnig wrote:
During a rebuild [...]. Please note that we use our research
compiler tool-chain (using tools from the cbmc package), which permits extended
reporting on type inconsistencies at link time.
[...]
gcc bridge.o fdb.o monitor.o link.o mdb.o vlan.o ../lib/libnetlink.a ../lib/libutil.a ../lib/libnetlink.a ../lib/libutil.a -o bridge
file link.c line 18: error: conflicting types for variable "filter_index"
old definition in module fdb file fdb.c line 29
signed int
new definition in module link file link.c line 18
unsigned int
<builtin>: recipe for target 'bridge' failed
make[3]: *** [bridge] Error 64
make[3]: Leaving directory '/srv/jenkins-slave/workspace/sid-goto-cc-iproute2/iproute2-3.14.0/bridge'
Makefile:45: recipe for target 'all' failed
While practical constraints may limit the value of filter_index to remain within
the bounds of a positive signed int, there is certainly no such guarantee here.
Also, a plain majority vote suggests that this really just a wrong declaration
in link.c as several declarations of filter_index as signed int exist.
[...]
My followup on this was:
I think the majority is wrong.
filter_index is assigned exclusively from if_nametoindex or ll_name_to_index
which both return unsigned int.
Changing it to unsigned everywhere seems better.
This has been minimally tested by using the bridge tool
to add vids and showing available vids on different devices.
Reported-by: Michael Tautschnig <mt@debian.org>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
This patch implements `bridge monitor mdb`.
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch implements:
bridge mdb { add | del } dev DEV port PORT grp GROUP
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
Sample output:
# ./bridge/bridge mdb show dev br0
bridge br0 port eth1 group 224.8.8.9
bridge br0 port eth0 group 224.8.8.8
# ./bridge/bridge -d mdb show dev br0
bridge br0 port eth1 group 224.8.8.9
bridge br0 port eth0 group 224.8.8.8
router ports on br0: eth0
Signed-off-by: Cong Wang <amwang@redhat.com>
