This patch is to add TCA_FLOWER_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev vxlan1 ingress
# tc filter add dev vxlan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
vxlan_opts 65793/4008635966 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev vxlan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
vxlan_opts 65793/4008635966
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 3 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- get_u32 with base = 0 for gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
erspan_opts 1:2:0:0 \
action mirred egress redirect dev erspan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49151 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
erspan_opts 1:2:0:0
csum pipe
index 2 ref 1 bind 1
...
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
vxlan_opts 65793 \
action mirred egress redirect dev vxlan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
vxlan_opts 65793
...
v1->v2:
- get_u32 with base = 0 for gbp.
- use to print_unint("0x%x") to print gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The Type I ERSPAN frame format is based on the barebones
IP + GRE(4-byte) encapsulation on top of the raw mirrored frame.
Both type I and II use 0x88BE as protocol type. Unlike type II
and III, no sequence number or key is required.
To creat a type I erspan tunnel device:
$ ip link add dev erspan11 type erspan \
local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 0
CC: Dmitriy Andreyevskiy <dandreye@cisco.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While at it, additionally fix a mandoc warning in mptcp.8
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for configuring offload mode upon MACsec
device creation.
If offload mode is not specified, then netlink attribute is not
added. Default behavior on the kernel side in this case is
backward-compatible (offloading is disabled by default).
Example:
$ ip link add link eth0 macsec0 type macsec port 11 encrypt on offload mac
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch enables MAC HW offload usage in iproute, since MACSec
implementation supports it now.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Root_block is also called root port guard, document it.
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Document that guard disable the port and how to reenable it
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This option is useful for Wifi bridge but need some tweak.
Document it from kernel patches documentation
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These can be configured to different paths. Reflect that in the
generated documentation.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Prepare for adding new variable substitutions. Unify the sed rules while
we're at it, since there's no need to write this out 4 times.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for configuring auto_dump attribute per reporter.
With this attribute, one can indicate whether the devlink kernel core
should execute automatic dump on error.
The change will be reflected in show, set and man commands.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix description for htb class prio parameter to indicate it's not
mandatory.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description for htb class parameter quantum.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description for htb qdisc parameter r2q.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This sentence predates addition of extended pedit for IPv6 packets.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Describe a way to update just the DSCP and just the ECN part of the
dsfield. That is useful on its own, but also it shows how retain works.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Support keywords dsfield, traffic_class and tos in the IPv6 context.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix error from make check.
n-old.tmac: <standard input>: line 86: 'R' is a string (producing the registered sign), not a macro.
Error in tc-actions.8
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DEVLINK_ATTR_ESWITCH_ENCAP_MODE netlink attribute carries enum. But the
code assumes bool value. Fix this by treating the encap mode in the same
way as other eswitch mode attributes, switching from "enable"/"disable"
to "basic"/"none", according to the enum. Maintain the backward
compatibility to allow user to pass "enable"/"disable" too. Also to be
in-sync with the rest of the "mode" commands, rename to "encap-mode".
Adjust the help and man page accordingly.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix the help and man page of "devlink health set" command to be aligned
with the rest of helps and man pages.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add ability to associate a policer with a trap group. The policer can be
unbound by using the 'nopolicer' keyword. In which case, the value
encoded in the 'DEVLINK_ATTR_TRAP_POLICER_ID' attribute will be '0'.
This is consistent with ip-link 'nomaster' keyword and the 'IFLA_MASTER'
attribute.
Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops policer 2
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"policer": 2
} ]
}
}
# devlink trap group set netdevsim/netdevsim10 group l3_drops nopolicer
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap policer set command allows the user to set the parameters of
the packet trap policer, such as rate and burst size. Example:
# devlink trap policer set netdevsim/netdevsim10 policer 1 rate 1000 burst 32
The trap policer show command allows the user to get the current
parameters of an individual policer or a dump of all policers in case
one is not specified. When '-s' is specified the policer's statistics
are shown. Example:
# devlink -jps trap policer show netdevsim/netdevsim10 policer 1
{
"trap_policer": {
"netdevsim/netdevsim10": [ {
"policer": 1,
"rate": 1000,
"burst": 32,
"stats": {
"rx": {
"dropped": 53
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When multiple bridges are present, 'bridge link show' diplays ports
for all bridges. Make this clear in the command description, and
point out the user to the ip command to display ports for a specific
bridge.
Reported-by: Marc Muehlfeld <mmuehlfe@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Recognize the new configuration option of the RED Qdisc, "nodrop". Add
support for passing flags through TCA_RED_FLAGS, and use it when passing
TC_RED_NODROP flag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce support for per-action hw stats type config.
This patch allows user to specify one of the following types of HW
stats for added action:
immediate - queried during dump time
delayed - polled from HW periodically or sent by HW in async manner
disabled - no stats needed
Note that if "hw_stats" option is not passed, user does not care about
the type, just expects any type of stats.
Examples:
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 7 sec used 2 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
hw_stats disabled
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 11 sec used 4 sec
Action statistics:
Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 102 bytes 1 pkt
backlog 0b 0p requeues 0
hw_stats immediate
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a description of the `ip macsec offload` command used to select the
offloading mode on a macsec interface when the underlying device
supports it.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add description for filters on rdma statistics show command.
Also add a filter description on the help message of the command.
Additionally, fix some whitespace issue in the man page.
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add resource subcommand in the OBJECT section and a short
description for it.
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description to the vrf subcommand and a reference to the
dedicated man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for devlink health error recovery status monitoring.
Update devlink-monitor man page accordingly.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the FQ-PIE packet Scheduler
Principles:
- Packets are classified on flows.
- This is a Stochastic model (as we use a hash, several flows might
be hashed to the same slot)
- Each flow has a PIE managed queue.
- Flows are linked onto two (Round Robin) lists,
so that new flows have priority on old ones.
- For a given flow, packets are not reordered.
- Drops during enqueue only.
- ECN capability is off by default.
- ECN threshold (if ECN is enabled) is at 10% by default.
- Uses timestamps to calculate queue delay by default.
Usage:
tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ]
[ target TIME ] [ tupdate TIME ]
[ alpha NUMBER ] [ beta NUMBER ]
[ quantum BYTES ] [ memory_limit BYTES ]
[ ecn_prob PERCENTAGE ] [ [no]ecn ]
[ [no]bytemode ] [ [no_]dq_rate_estimator ]
defaults:
limit: 10240 packets, flows: 1024
target: 15 ms, tupdate: 15 ms (in jiffies)
alpha: 1/8, beta : 5/4
quantum: device MTU, memory_limit: 32 Mb
ecnprob: 10%, ecn: off
bytemode: off, dq_rate_estimator: off
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com>
Signed-off-by: V. Saicharan <vsaicharan1998@gmail.com>
Signed-off-by: Mohit Bhasi <mohitbhasi1998@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While at it, convert xfrm_xfrma_print and xfrm_encap_type_parse to use
the UAPI macros for encap_type as suggested by David Ahern, and add the
UAPI udp.h header (sync'd from ipsec-next to get the TCP_ENCAP_ESPINTCP
definition).
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Enable proper JSON output for the PIE Qdisc.
Use sprint_time() to print the value of tc_pie_xstats->delay.
Use the long double format specifier to print tc_pie_xstats->prob.
Also, fix the indentation in the oneline output of statistics and update
the man page to reflect this change.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the FQ Qdisc.
Use the "KEY VALUE" format for oneline output of statistics instead of
"VALUE KEY", and remove unnecessary commas from the output.
Use sprint_size() to print size values in fq_print_opt().
Use sprint_time64() to print time values in fq_print_xstats().
Also, update the man page to reflect the changes in the output format.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
"SRC VNI" is only one argument and should appear as such. Moreover, this
argument to the src_vni option is documented under three forms: "SRC_VNI",
"SRC VNI" and "VNI" in different places. Consistenly use the simplest form,
"VNI".
Fixes: c5b176e5ba ("bridge: fdb: add support for src_vni option")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PIE now uses per packet timestamps to calculate queuing
delay. The average dequeue rate based queue delay
calculation is now made optional. This patch adds the option
to enable or disable the use of Little's law to calculate
queuing delay.
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
tc-ematch.8 was missing the description of canid() ematch rule, so document
this.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extended match rules are currently supported by basic, flow and cgroup
filters, so update the man page.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PPP devices can be moved to different network namespaces. The feature
was added by commit 79c441ae505c ("ppp: implement x-netns support")
in Linux 4.3.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement setting and printing of action flags with single available flag
value "no_percpu" that translates to kernel UAPI TCA_ACT_FLAGS value
TCA_ACT_FLAGS_NO_PERCPU_STATS. Update man page with information regarding
usage of action flags.
Example usage:
# tc actions add action gact drop no_percpu
# sudo tc actions list action gact
total acts 1
action order 0: gact action drop
random type none pass val 0
index 1 ref 1 bind 0
no_percpu
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add document of accessing the MR counters into
the rdma-statistic man pages.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This is a follow up of the commit eaefb07804 ("ipnetns: enable to dump
nsid conversion table").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is a follow up of the commit ebe3ce2fcc ("ipnetns: parse nsid as a
signed integer").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
By default, all devices are listed, not only the default group.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The ability to specify the source adresse for 'encap ip' / 'encap ip6'
was added in commit 94a8722f2f but the man
page was not updated.
Also fixes a missing page in ip-route.8.in.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend existing devlink reload command by adding option "netns" by which
user can instruct kernel to reload the devlink instance into specified
network namespace.
Example:
$ ip netns add testns1
$ devlink dev reload netdevsim/netdevsim10 netns testns1
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Similar to ip tool, add an option to devlink to operate under certain
network namespace. Unfortunately, "-n" is already taken, so use "-N"
instead.
Example:
$ devlink -N testns1 dev show
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support to lookup a neigh entry
using recently added support in the kernel using RTM_GETNEIGH
example:
$ip neigh get 10.0.2.4 dev test-dummy0
10.0.2.4 dev test-dummy0 lladdr de:ad:be:ef:13:37 PERMANENT
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support to lookup a bridge fdb entry
using recently added support in the kernel using RTM_GETNEIGH
(and AF_BRIDGE family).
example:
$bridge fdb get 02:02:00:00:00:03 dev test-dummy0 vlan 1002
02:02:00:00:00:03 dev test-dummy0 vlan 1002 master bridge
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The man page of ip-macsec and the existance of the tool makes it seem like
the user could just configure static keys once, and be done with it. That is
not the case. Some form or key management must be done in user space.
Add a note about that.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit 6df9c7a06a ("ss: add SK_MEMINFO_DROPS display") ss -m
displays also a drop counter for each socket.
This commit properly document it into the man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Listen to status notifications coming from kernel during flashing and
put them on stdout to inform user about the status.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add document of setting the adaptive-moderation for the ib device.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add the command alias "change" to man page.
Don't show it on usage, since it is not commonly used.
Reported-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matteo Croce <mcroce@redhat.com>
Add document of accessing the QP counter, including bind/unbind a QP
to a counter manually or automatically, and dump counter statistics.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add documentation for the latest options, flags and txtime-delay, to the
taprio manpage.
This also adds an example to run tc in txtime offload mode.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Document the newly added option (skip_sock_check) on the etf man-page.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a man page describing the newly added TC mpls manipulation actions.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ss by default shows data rates in human-readable form - as Mbps/Gbps etc.
Enhance --numeric mode to show raw values in bps, without conversion.
Signed-of-by: Tomasz Torcz <tomasz.torcz@nordea.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
URL for netem page on sources section points to a no more existent
resource. Fix this using the correct URL.
Fixes: cd72dcf13c ("netem: add man-page")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add nhid option for routes to use nexthop objects by id.
Example:
$ ip nexthop add id 1 via 10.99.1.2 dev veth1
$ ip route add 10.100.1.0/24 nhid 1
$ ip route ls
...
10.100.1.0/24 nhid 1 via 10.99.1.2 dev veth1
Signed-off-by: David Ahern <dsahern@gmail.com>
ctinfo is a tc action restoring data stored in conntrack marks to
various fields. At present it has two independent modes of operation,
restoration of DSCP into IPv4/v6 diffserv and restoration of conntrack
marks into packet skb marks.
It understands a number of parameters specific to this action in
additional to the usual action syntax. Each operating mode is
independent of the other so all options are optional, however not
specifying at least one mode is a bit pointless.
Usage: ... ctinfo [dscp mask [statemask]] [cpmark [mask]] [zone ZONE]
[CONTROL] [index <INDEX>]
DSCP mode
dscp enables copying of a DSCP stored in the conntrack mark into the
ipv4/v6 diffserv field. The mask is a 32bit field and specifies where
in the conntrack mark the DSCP value is located. It must be 6
contiguous bits long. eg. 0xfc000000 would restore the DSCP from the
upper 6 bits of the conntrack mark.
The DSCP copying may be optionally controlled by a statemask. The
statemask is a 32bit field, usually with a single bit set and must not
overlap the dscp mask. The DSCP restore operation will only take place
if the corresponding bit/s in conntrack mark ANDed with the statemask
yield a non zero result.
eg. dscp 0xfc000000 0x01000000 would retrieve the DSCP from the top 6
bits, whilst using bit 25 as a flag to do so. Bit 26 is unused in this
example.
CPMARK mode
cpmark enables copying of the conntrack mark to the packet skb mark. In
this mode it is completely equivalent to the existing act_connmark
action. Additional functionality is provided by the optional mask
parameter, whereby the stored conntrack mark is logically ANDed with the
cpmark mask before being stored into skb mark. This allows shared usage
of the conntrack mark between applications.
eg. cpmark 0x00ffffff would restore only the lower 24 bits of the
conntrack mark, thus may be useful in the event that the upper 8 bits
are used by the DSCP function.
Usage: ... ctinfo [dscp mask [statemask]] [cpmark [mask]] [zone ZONE]
[CONTROL] [index <INDEX>]
where :
dscp MASK is the bitmask to restore DSCP
STATEMASK is the bitmask to determine conditional restoring
cpmark MASK mask applied to restored packet mark
ZONE is the conntrack zone
CONTROL := reclassify | pipe | drop | continue | ok |
goto chain <CHAIN_INDEX>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
while at it, fix missing square bracket near 'ptype' and a typo in the
action description (it's -> its).
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add man page to describe additional set netns command
for rdma device.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow to limit 'ip xfrm {state|policy} list' output to a certain address
family and to delete all states/policies by family.
Although preferred_family was already set in filters, the filter
function ignored it. To enable filtering despite the lack of other
selectors, filter.use has to be set if family is not AF_UNSPEC.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
